IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
which allows us also to drop the initial manual load in the init,
which would also trigger if the tab isn't visible.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
setting scrollable on the parent tab panel makes not much sense and
will always add a scroll bar that can scroll a few pixels, even if
there's enough space.
Rather set it to true (= auto) in the actual panels that hold the
content.
Also set a bottom margin so that users can see the "end" of the panel
at the bottom, otherwise it looked like it had a start and sides, but
no bottom.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
input panel collect all form fields below them, so nesting two
input panels needs a bit of special care to avoid that each of the
panels adds the data of the deeper nested ones, resulting in
duplicate parameters that the backend then chokes one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the intra-panel margin is still the same (10 + 0 == 7 + 3) but one
can now see the bottom border.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fix missing load on initial view, re-use the prune input panel for
editing and avoid using a tab panel for a single tab, rework also
some columns widths and various other small parts-
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we already handle that manually in the onLoad and want to further
extend that, so drop the more generic monStoreError
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with namespaces the paths can get pretty complex, so make the path
column take some flex space too, but not too much to avoid making it
look odd for the short paths we have otherwise
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without namespaces this had not much use, but now that we can have
permissions below we should allow so.
For convenience also query the namsepaces here and add them to the
list of available ACL paths, the read-dir shouldn't be that expensive
(albeit, we could cache them in the frontend)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This reverts commit 7a1a5d206d.
We could already cause the behavior by simply setting ignore-verified
to false, aas that flag is basically an on/off switch for even
considering outdated-after or not.
So avoid the extra logic and just make the gui use the previously
existing way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by filtering out the empty namespace from the api, and putting
manually a div with the grid-empty xclass around the gettext
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: reword commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'defaultStore' can be '' or null, so check for truthyness also, we
want the mapping to be a formField so that the validation triggers
and the restore button gets en/disabled accordingly. We still have to
call 'getValue' manually, because the onGetValues will get it as
string instead of an array
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else it's a lot of wasted space for the ordinary case, that hasn't
permanent maintenance modes activated, and even if, their admins
should be used to it, so not the best space/usability ROI there
either.
Just use the icon as visual clue and add a tooltip for the
maintenance mode info.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to not having to query the activeTasks everywhere, change the renderer
to omit the check/spinner when no activeTasks are given
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
matches what we do for (most) of such things in PVE since 7.0 there
and also what the disk management gui shows, further disks are sold
with SI units for their advertised capacity, so its more fitting
there too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
commit bd21a63b only fixed sync, not verify, and we can do better by
using a display-edit field.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we cannot change the id, and even if we send the same, the backend
does not allow 'duplicate' parameters (the id is in the url already)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by checking if *any* record has data, not only the first
this would prevent the chart from being shown for e.g. newly added
datastores, or for datastores after the server was offline for some time
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Not only can we remove a few lines of duplicated code, we also get
the "link to repo management" for free.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
only ask the name of the current NS, not the full NS path to avoid
too long input requirements on deep levels.
needs a few smaller hacks, ideally we would pull out the basic stuff
from Edit window in some EditBase window and let both, SafeDestroy
and Edit window derive from that, for better common, in sync
features.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it maybe should still simple get dropped and replaced with
(empty)Text 'Root' or 'Root Namespace'
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
never makes sense to clear the value due to remote or remoteStore
change as we weren't enabled then in the first place.
This fixes clearing the currently set namespace on editing an
existing job, which always made it seem like the Root namespace was
selected, even if the originalValue was correct (thus the dirty-form
reset/ok behaviour still worked, making it even more confusing)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid making it "jump" in the users face by immediately opening
the picker on window open.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid that the comobox triggers automatic API request with the
queryParam default `query` GET param on manual typing (e.g., for
filtering) from the user, we have all data already loaded and locally
available.
https://docs.sencha.com/extjs/7.0.0/classic/Ext.form.field.ComboBox.html#cfg-queryMode
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This provides immediate feedback for adding the respective icon in
the navigation tree entry most of the time, and we can then increase
the query period of the datastore list store to the original 15
again, as it was lowered to 5 seconds for just this reason in commit
fbd6f54f39
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we query that store to add the datastore specific ACL paths to
improve UX there, this failed a while due the StoreManager lookup
always failing as the store wasn't registered in the StoreManager due
to using storeid vs. correct storeId
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add a default namespace selector (of the current default store)
and a namespace selector per target datastore (for media-sets with
multiple datastores).
to achieve that we have to change the way we handle the mapping field a bit:
* don't use it as field directly (otherwise the value gets stringified),
but use the 'getValue' method in 'onGetValues'.
* set the defaultStore there, not only that we have one
(with this we can now easily show it as emptytext for each store)
* add a reference to the widgets to the record so that we can access
them in the respective change handler (also clean those references up,
else we have a cyclic reference between record <-> widget)
in onGetValues, if we have multiple datastores, the mapping grid does
all the work for us, otherwise, we have to create the ns mapping
ourselves there.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the namespaces are in the snapshot path we get here, we must parse
them out, else we confuse the first namespace with the group.
for now, show all namespaces on the same level (so not nested), and
do not allow for preselecting a namespace for restoring
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for better re-usability in the future and it felt a bit odd to have
such specific logic in the sync job edit directly
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of using 'replaceChild', simply set the appropriate
properties. When using the 'nodeUpdate' (protected function of extjs,
intended to be overwritten) instead of the private 'updateNode', it
will be called when the properties change
This way, the treenode stays the same and it can keep the selection
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
they all still used some odd side effects of the tree structure to
decided what record type they operated on, just move them over to the
new `ty` record.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and transform to reST.
semantic changes to the content are:
* s/{pve}/`Proxmox Backup`_/g
* changing footnotes to parenthesized notes (did not see footnote use in
the current docs)
* removed the comment about systems setup before the introduction of
p-b-t (which was introduced before pbs)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
this not only makes the action disable/hide checks simpler, but also
prepares the view a bit for the idea of adding a new API endpoint
that returns the whole datastore content tree as structured JSON so
that it can be directly loaded into a tree store.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
that way it's easier to see on which NS one currently operates and
allows better distinguishing of root NS and some sub ns named "Root"
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
reference NS so that users get a hint where they are currently
hierarchy-wise, and clarify that we found no *accessible* snapshots,
on this level, i.e., there can be some that we just cannot see due to
only having access on lover level NS or being different owners.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since markdown notes might be rather long, this commit adds a tab
similar to pve's datacenter or node notes. requires a bump of the
widget toolkit in order to use the `pmxNotesView`.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
without this the store stayed active in the background and kept
updating every 3s for every datastore the ui was opened.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
changed pmxUserSelector to pbsAuthidSelector, because it is currently
not possible to restore with a api token via gui.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Allows setting the default language in Configuration/Other/General
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is nothing to important and nothing that'll get changed *that*
often, so 2.5s is more than enough.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
`deactivate` is only triggered if we switch to a different tab on
the same navigation level, but if we switch to a completely different
component (e.g., fom `Options -> Others` to `Datastore foo`) we can
only work with the destroy event, use the before one as else we
cannot access the view controllers method anymore.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
verifying a single snapshot is now never skipped because of recent verify
verifying a group will now reverify after 29 days to be consistent
with the 'All OK (old)' display
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To much wasted space else.
Also rename "Options" to "Others", while it's not _that_ much better
it's slightly more intuitive than config -> options (which has some
redundancy)...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
also fixup missing emptyText for fingerprint (adapted from PVE's PBS
storage addition) and code-style in surrounding areas a bit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When a user directly opened the webui with a fragment that is not
the summary, opening of the 'my settings' window fails because the
initial set of the columns field triggers a state change, which in turn
tries to trigger 'updateColumns'. That fails though, since the columns
were not even rendered yet (because we are on a different tab).
To fix this, simply return when the panel is not rendered yet.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
similar to PVE, copying over the remaining commit message:
Using 00:00 with relying on the implied default is sub optimal as its
a bit of a magic example that new users may not understand as easily.
So spell it out explicitly, even if there'd be a shorter version
possible.
We also had some request for the once-daily every day, and its a
sensible example to have in general, could help getting the
difference between an hour list and a single one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
store.getData() returns an 'Ext.util.Collection' which is a special
class that does more than being an array of records. Namely, it can
have 'observers' which can react on the change of the collection
Here, the 'onWidgetAttach' callback will be called twice on the first
row add and the widgets (and thus stores) are cached by extjs. When
doing a 'setData' of a Collection, it tries to add the store as an
observer, but due to the above caching and multiple calling this fails
since the store is already an observer.
For this reason, we want to actually copy the records (which neither
the store, nor the Collection has a method for...)
This gives us an additional benefit: The different pbsGroupSelectors can
sort independently now, before it was all linked to the original store's
collection.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if 'me' is already destroyed here, return
if records is 'null' (which can happen on a not successful load),
load an empty list instead
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'record[widget]' does not contain anything since the widgets are
in the 'widgets' property so delete that
we also have to remove the 'record' entry of the widget so that
the widget does not have a link to the record anymore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adds a second tab and adapts the styling to our usual one (border/padding)
adds a change listener to the remote datastore selector to change the
remote + datastore on the group filters
remaining changes are mostly indentation changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
adds a second tab and adapts the styling to our usual one (border/padding)
adds a change listener to the datastore selector to change it on the
group filters
remaining changes are mostly indentation changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this contains a grid + button + hidden field which lets the user
add group filters one by one. the first column is the type selector
(type, group, regex) and the second column shows the relevant
input field (groupselector, kvcombobox for type, and textfield for regex)
i had to hack a little to get access to the widgets of the
fieldcontainer, since we cannot simply access the widget of a column
from another column (which we need to show the correct one when changing
the type), also we cannot traverse the widget hirachy in the usual way,
since extjs seems to build it differently for widgetcolumns.
to solve this, i added references of the widgets to the record, and a
reference of the record to the widgets. since this is now a cyclic
reference, i solve that in 'removeFilter' and in 'beforedestroy' of the grid
by removing the references again
also contains a small css style to remove the padding in the rows
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to select either a group from a datastore
for now it is expected to set the data in the store manually
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
avoid that there's the same icon rendered twice, once clickable and
once as status. Also indicate the protection with a literal text and
by highlighting the single shield with green, if protected.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we forgot to correclty send the network value as we changed from
the radiogroup to a simple text field
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
