IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pass the `-E` option to, quoting it's man-page, "don't use a saved
environment (the structure caching all cross-references, but rebuild
it completely."
As with reusing the environment one gets some empty results for
synopsis stuff depending on build order, for example the synopsis in
the command-syntax appendix HTML output is empty while the same
synopsis used for the dedicated HTML page is complete.
By making the build-log more verbose I caught the attention of some
emitted 'env-purge-doc' events from sphinx; while this itself might be
harmless (I didn't followed the rat tail to its end), it made me a bit
suspicious about caching and wrong/missing invalidation.
With ignoring the environment this is fixed, a diffoscope comparison
shows that not only the command-syntax page, but many others have the
various synposis content added again. There are solely added lines, no
removed nor changed, so it seems fine to enabled that option without
an in-depth sphinx review.
Note, I first suspected the use of a separate "doctree pickles" cache
directory (`-d` option) and is used for all output types besides the
man-pages one, which uses the default .doctree directory.
But changing the man-page target to also use the custom doctree cache
had no effect on the build-result whatsoever (compared with
diffoscope).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
To be in line with the updated permission requirements, as
Datastore.Audit is now required to read and edit sync jobs in push
direction.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
* consistently use "medium" (singular), as only one is needed for
installation (installation-media.rst not renamed)
* add short introduction to recently added chapter "Installation Media"
* update minimum required flash drive storage space to 2 GB
* remove CD-ROM (too little storage space) but keep DVD
* mention explicitly that data get overwritten on installation media /
installation target disks
* mention that using `dd` will require root privileges
* add accidentally cut off text when copying from PVE docs
* add reference labels to currently needed section titles
* reword some paragraphs for completeness and readability
* mention all installation methods in the intro of "Server Installation"
* add the boot order as possible boot issue
* remove recently added redundant product website hyperlinks (as earlier
with commit 34407477e2)
* fix broken heading level of APT-based PBC repo
* slightly reorder sub-chapters of "Installation":
After adding the chapter "Installation Media" (d363818641), the chapter
order under "Installation" is:
1. System Requirements
2. Installation Media
3. Debian Package Repositories
4. Server Installation
5. Client Installation
But repos are more likely to be configured after installation, and for
other installation methods chapter links exist anyway. So to keep the
chapter order more logical, "Debian Package Repositories" is now moved
after "Client Installation".
Signed-off-by: Alexander Zeidler <a.zeidler@proxmox.com>
Specifically about jobs and how they behave when the datastore is not
mounted, how to create and use deivices with multiple datatstores on
multiple PBS instances and options how to handle failed unmounts.
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
The same word occurring twice in succession can lead to the brain
skipping the second occurrence. Change the name of the archives in the
example from backup.pxar to archive-name.pxar to avoid that effect.
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
[ TL: squash in Christian's suggestion to use 'archive-name.pxar' ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Explain that the change detection mode data makes sure that no files
are considered reusable, even if their metadata might match and that
the use of ctime and inode number is not possible for detection of
unchanged files if the filesystem was synced to a temporary location,
therefore the mtime and size are used for detection.
Also note the reduced deduplication when storing snaphshots with
mixed archive formats on the same datastore.
Further, mention the backwards compatibility to older version of the
Proxmox Backup Server.
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The example commands in the Change Detection Mode / File Exclusion
section are missing the command in the client invocation. Add the
backup command to the examples, so they are actually valid.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Add onlineHelp link to the consent-banner docs section in the popup when
inserting the consent-banner text.
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Currently, common details regarding garbage collection are documented
in the backup client and the maintenance task. Deduplicate this
information by moving the details to the background section of the
maintenance task and reference that section in the backup client
part.
Reviewed-by: Gabriel Goller <g.goller@proxmox.com>
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Users should be made aware that the data stored in chunks outlives
the backup snapshots on pruning and that backups created using the
change-detection-mode set to metadata might reference chunks
containing files which have vanished since the previous backup, but
might still be accessible when access to the chunks raw data is
possible (client or server side).
Reviewed-by: Gabriel Goller <g.goller@proxmox.com>
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add short section explaining the `resync-corrupt` option on the
sync-job.
Originally-by: Shannon Sterz <s.sterz@proxmox.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
With single ticks the containing modes and archive formats are
displayed cursive, to be consistent with other sections of the
documentation use inline blocks.
Adapted line wrappings to the additional line length.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reviewed-by: Shannon Sterz <s.sterz@proxmox.com>
Currently, the change detection modes are described in the client
usage section, not intended for in-depth explanation on how these
client option works, but rather with focus on how to use them.
Therefore, add a reference to the more detailed technical section
regarding the change detection modes and reduce duplicate
explanations.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reviewed-by: Shannon Sterz <s.sterz@proxmox.com>
Describe in more details how the different change detection modes
operate and give insights into the inner workings, especially for the
more complex `metadata` mode, which involves lookahead caching and
padding calculation for reused payload chunks.
Suggested-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reviewed-by: Shannon Sterz <s.sterz@proxmox.com>
this got reported via e-mail - seems this one occurrence was
forgotten. grepped through the docs (and the whole repo) for 'Mail'
and 'Gateway', and it seems this was the only one.
Fixes: cbd7db1d ("docs: certificates")
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Documents the caveats of sync jobs in push direction, explicitly
recommending setting up dedicted remotes for these sync jobs.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add a short sentence describing the function of the remove vanished
flag since this has not been documented explicitly.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
As node.cfg is a rather general name that could clash with manual
pages from other packages, or at least be a bit confusing if there's
another tool providing a node.cfg.
In the long term we should rename all existing manual pages from
section 5 and 7, i.e. all those that are not directly named after an
executable. As those normally talk about product-specific configs and
topics where just the filename is not specific enough for a system
wide manual page.
Note that there was some off-list discussion with proposal of using
"section suffixes" that man supports and can be used to differ between
manual pages with the same name (and in the same section), for example
`man 3pm Git`, but to me this seems a bit more obscure and potentially
less discoverable, but can be a great way to provide an link alias for
convenience.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Add man page for the node.cfg config file.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
[ TL: pull out sorting of synopsis file list to separate commit ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The chunks subdirectories are only using the chunk's 2 byte checksum
prefix given in hex notation.
Also, clarify that chunks are grouped into subdirectories.
Reported in the community forum:
https://forum.proxmox.com/threads/155751/
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add External Metrics page to PBS's documentation. Most of it is copied
from the PVE documentation, minus the Graphite part.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
else we don't pick up the options set by the wrapper, which include generation
of debug symbols. until rustc 1.77, this was not needed because compiled
binaries always included a non-stripped libstd. now, without this change, the
binaries built with `cargo build --release` have no debug symbols at all
trigger a warning. fix this and include debug symbols when building a package,
like was originally intended for release package builds.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
This is basically semantic revert of e5c0d80c ("docs: add note for not
using remote storages") that, while well intended, has a few problems,
e.g.:
- This is the minimal/recommended requirements section, which should
list the rough basic specs a setup must/should have. Listing
everything that is not best to do would bloat this list
significantly and it's just the wrong place for it, i.e., it isn't a
recommended against list.
- while it's true that a remote storage will basically always have
_some_ overhead over using the same HW with a (modern) local storage
(file) system, that does **not** mean that the remote storage has
insufficient performance characteristics. We know of lots of fast
Ceph setups, even release benchmarks for them, or storages like
BlockBridge, that provide high performance while being remote.
So avoid this X-Y-problem style argumentation and focus on what is
actually important, even though I naturally get that there are some
users that use slow NFS attached storages, but breaking style here
won't cure them and I'm sure that they are capable of setting up such
a slow local storage that it won't make a real difference compared to
the NFS one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
such as NFS or SMB. They will not provide the expected performance
and it's better to recommend against them.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Describe the motivation and basic principle of the clients change
detection mode and show an example invocation.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This new section describes how the notification-mode parameter works.
The section also contains also parts of the old notification section
from the maintenance chapter, reusing the description of the
`notify` and `notify-user` parameters.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Reviewed-by: Gabriel Goller <g.goller@proxmox.com>
Mention and briefly explain it. The main part of the documentation will
live in the Wiki for now as it applies to not just Proxmox Mail Gateway.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
[ TL: adapt to changes made in the wiki article ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Mostly copied from PVE and adapted where it makes sense.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Maximiliano Sandoval <m.sandoval@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The sphinx documentation [0] describes the _static folder as the
location for the custom.js and custom.css so we move the files there, as
we do not need those files outside the directory.
This also removes the error message when building:
WARNING: html_static_path entry '_static' does not exist
[0] https://www.sphinx-doc.org/en/master/development/theming.html#add-your-own-static-files-to-the-build-assets
Signed-off-by: Hannes Duerr <h.duerr@proxmox.com>
On this `ls` command the shell prompt ('#') was missing.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
