Proxmox/pve-docs
5
0
Fork 0
mirror of git://git.proxmox.com/git/pve-docs.git synced 2025-10-31 04:23:45 +03:00
Code Releases Activity
Files
e38ceea5ea73d835a5d7c96d7ff885bb50bb7474
pve-docs/certificate-management.adoc
Fabian Grünbichler 5a42e20dba fix #5665: add note about short-lived cert renewal 
not that obvious behaviour on the systemd side, and missing cert renewal can
have wide-reaching consequences.

Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
2024-11-08 11:30:21 +01:00

390 lines
16 KiB
Plaintext
Raw Blame History

[[sysadmin_certificate_management]]
Certificate Management
----------------------
ifdef::wiki[]
:pve-toplevel:
endif::wiki[]
Certificates for Intra-Cluster Communication
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Each {PVE} cluster creates by default its own (self-signed) Certificate
Authority (CA) and generates a certificate for each node which gets signed by
the aforementioned CA. These certificates are used for encrypted communication
with the cluster's `pveproxy` service and the Shell/Console feature if SPICE is
used.
The CA certificate and key are stored in the xref:chapter_pmxcfs[Proxmox Cluster File System (pmxcfs)].
[[sysadmin_certs_api_gui]]
Certificates for API and Web GUI
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The REST API and web GUI are provided by the `pveproxy` service, which runs on
each node.
You have the following options for the certificate used by `pveproxy`:
1. By default the node-specific certificate in
`/etc/pve/nodes/NODENAME/pve-ssl.pem` is used. This certificate is signed by
the cluster CA and therefore not automatically trusted by browsers and
operating systems.
2. use an externally provided certificate (e.g. signed by a commercial CA).
3. use ACME (Let's Encrypt) to get a trusted certificate with automatic
renewal, this is also integrated in the {pve} API and web interface.
For options 2 and 3 the file `/etc/pve/local/pveproxy-ssl.pem` (and
`/etc/pve/local/pveproxy-ssl.key`, which needs to be without password) is used.
NOTE: Keep in mind that `/etc/pve/local` is a node specific symlink to
`/etc/pve/nodes/NODENAME`.
Certificates are managed with the {PVE} Node management command
(see the `pvenode(1)` manpage).
WARNING: Do not replace or manually modify the automatically generated node
certificate files in `/etc/pve/local/pve-ssl.pem` and
`/etc/pve/local/pve-ssl.key` or the cluster CA files in
`/etc/pve/pve-root-ca.pem` and `/etc/pve/priv/pve-root-ca.key`.
[[sysadmin_certs_upload_custom]]
Upload Custom Certificate
~~~~~~~~~~~~~~~~~~~~~~~~~
If you already have a certificate which you want to use for a {pve} node you
can upload that certificate simply over the web interface.
[thumbnail="screenshot/gui-node-certs-upload-custom.png"]
Note that the certificates key file, if provided, mustn't be password
protected.
[[sysadmin_certs_get_trusted_acme_cert]]
Trusted certificates via Let's Encrypt (ACME)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
{PVE} includes an implementation of the **A**utomatic **C**ertificate
**M**anagement **E**nvironment **ACME** protocol, allowing {pve} admins to
use an ACME provider like Let's Encrypt for easy setup of TLS certificates
which are accepted and trusted on modern operating systems and web browsers
out of the box.
Currently, the two ACME endpoints implemented are the
https://letsencrypt.org[Let's Encrypt (LE)] production and its staging
environment. Our ACME client supports validation of `http-01` challenges using
a built-in web server and validation of `dns-01` challenges using a DNS plugin
supporting all the DNS API endpoints https://acme.sh[acme.sh] does.
[[sysadmin_certs_acme_account]]
ACME Account
^^^^^^^^^^^^
[thumbnail="screenshot/gui-datacenter-acme-register-account.png"]
You need to register an ACME account per cluster with the endpoint you want to
use. The email address used for that account will serve as contact point for
renewal-due or similar notifications from the ACME endpoint.
You can register and deactivate ACME accounts over the web interface
`Datacenter -> ACME` or using the `pvenode` command-line tool.
----
pvenode acme account register account-name mail@example.com
----
TIP: Because of https://letsencrypt.org/docs/rate-limits/[rate-limits] you
should use LE `staging` for experiments or if you use ACME for the first time.
[[sysadmin_certs_acme_plugins]]
ACME Plugins
^^^^^^^^^^^^
The ACME plugins task is to provide automatic verification that you, and thus
the {pve} cluster under your operation, are the real owner of a domain. This is
the basis building block for automatic certificate management.
The ACME protocol specifies different types of challenges, for example the
`http-01` where a web server provides a file with a certain content to prove
that it controls a domain. Sometimes this isn't possible, either because of
technical limitations or if the address of a record to is not reachable from
the public internet. The `dns-01` challenge can be used in these cases. This
challenge is fulfilled by creating a certain DNS record in the domain's zone.
[thumbnail="screenshot/gui-datacenter-acme-overview.png"]
{pve} supports both of those challenge types out of the box, you can configure
plugins either over the web interface under `Datacenter -> ACME`, or using the
`pvenode acme plugin add` command.
ACME Plugin configurations are stored in `/etc/pve/priv/acme/plugins.cfg`.
A plugin is available for all nodes in the cluster.
Node Domains
^^^^^^^^^^^^
Each domain is node specific. You can add new or manage existing domain entries
under `Node -> Certificates`, or using the `pvenode config` command.
[thumbnail="screenshot/gui-node-certs-add-domain.png"]
After configuring the desired domain(s) for a node and ensuring that the
desired ACME account is selected, you can order your new certificate over the
web interface. On success the interface will reload after 10 seconds.
Renewal will happen xref:sysadmin_certs_acme_automatic_renewal[automatically].
[[sysadmin_certs_acme_http_challenge]]
ACME HTTP Challenge Plugin
~~~~~~~~~~~~~~~~~~~~~~~~~~
There is always an implicitly configured `standalone` plugin for validating
`http-01` challenges via the built-in webserver spawned on port 80.
NOTE: The name `standalone` means that it can provide the validation on it's
own, without any third party service. So, this plugin works also for cluster
nodes.
There are a few prerequisites to use it for certificate management with Let's
Encrypts ACME.
* You have to accept the ToS of Let's Encrypt to register an account.
* **Port 80** of the node needs to be reachable from the internet.
* There **must** be no other listener on port 80.
* The requested (sub)domain needs to resolve to a public IP of the Node.
[[sysadmin_certs_acme_dns_challenge]]
ACME DNS API Challenge Plugin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On systems where external access for validation via the `http-01` method is
not possible or desired, it is possible to use the `dns-01` validation method.
This validation method requires a DNS server that allows provisioning of `TXT`
records via an API.
[[sysadmin_certs_acme_dns_api_config]]
Configuring ACME DNS APIs for validation
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
{PVE} re-uses the DNS plugins developed for the `acme.sh`
footnote:[acme.sh https://github.com/acmesh-official/acme.sh] project, please
refer to its documentation for details on configuration of specific APIs.
The easiest way to configure a new plugin with the DNS API is using the web
interface (`Datacenter -> ACME`).
[thumbnail="screenshot/gui-datacenter-acme-add-dns-plugin.png"]
Choose `DNS` as challenge type. Then you can select your API provider, enter
the credential data to access your account over their API.
The validation delay determines the time in seconds between setting the DNS
record and prompting the ACME provider to validate it, as providers often need
some time to propagate the record in their infrastructure.
TIP: See the acme.sh
https://github.com/acmesh-official/acme.sh/wiki/dnsapi#how-to-use-dns-api[How to use DNS API]
wiki for more detailed information about getting API credentials for your
provider.
As there are many DNS providers and API endpoints {pve} automatically generates
the form for the credentials for some providers. For the others you will see a
bigger text area, simply copy all the credentials `KEY`=`VALUE` pairs in there.
DNS Validation through CNAME Alias
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
A special `alias` mode can be used to handle the validation on a different
domain/DNS server, in case your primary/real DNS does not support provisioning
via an API. Manually set up a permanent `CNAME` record for
`_acme-challenge.domain1.example` pointing to `_acme-challenge.domain2.example`
and set the `alias` property on the corresponding `acmedomainX` key in the
{PVE} node configuration file to `domain2.example` to allow the DNS server of
`domain2.example` to validate all challenges for `domain1.example`.
Combination of Plugins
^^^^^^^^^^^^^^^^^^^^^^
Combining `http-01` and `dns-01` validation is possible in case your node is
reachable via multiple domains with different requirements / DNS provisioning
capabilities. Mixing DNS APIs from multiple providers or instances is also
possible by specifying different plugin instances per domain.
TIP: Accessing the same service over multiple domains increases complexity and
should be avoided if possible.
[[sysadmin_certs_acme_automatic_renewal]]
Automatic renewal of ACME certificates
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If a node has been successfully configured with an ACME-provided certificate
(either via pvenode or via the GUI), the certificate will be automatically
renewed by the `pve-daily-update.service`. Currently, renewal will be attempted
if the certificate has expired already, or will expire in the next 30 days.
NOTE: If you are using a custom directory that issues short-lived certificates,
disabling the random delay for the `pve-daily-update.timer` unit might be
advisable to avoid missing a certificate renewal after a reboot.
ACME Examples with `pvenode`
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Example: Sample `pvenode` invocation for using Let's Encrypt certificates
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
----
root@proxmox:~# pvenode acme account register default mail@example.invalid
Directory endpoints:
0) Let's Encrypt V2 (https://acme-v02.api.letsencrypt.org/directory)
1) Let's Encrypt V2 Staging (https://acme-staging-v02.api.letsencrypt.org/directory)
2) Custom
Enter selection: 1
Terms of Service: https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf
Do you agree to the above terms? [y|N]y
...
Task OK
root@proxmox:~# pvenode config set --acme domains=example.invalid
root@proxmox:~# pvenode acme cert order
Loading ACME account details
Placing ACME order
...
Status is 'valid'!
All domains validated!
...
Downloading certificate
Setting pveproxy certificate and key
Restarting pveproxy
Task OK
----
Example: Setting up the OVH API for validating a domain
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
NOTE: the account registration steps are the same no matter which plugins are
used, and are not repeated here.
NOTE: `OVH_AK` and `OVH_AS` need to be obtained from OVH according to the OVH
API documentation
First you need to get all information so you and {pve} can access the API.
----
root@proxmox:~# cat /path/to/api-token
OVH_AK=XXXXXXXXXXXXXXXX
OVH_AS=YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
root@proxmox:~# source /path/to/api-token
root@proxmox:~# curl -XPOST -H"X-Ovh-Application: $OVH_AK" -H "Content-type: application/json" \
https://eu.api.ovh.com/1.0/auth/credential -d '{
"accessRules": [
{"method": "GET","path": "/auth/time"},
{"method": "GET","path": "/domain"},
{"method": "GET","path": "/domain/zone/*"},
{"method": "GET","path": "/domain/zone/*/record"},
{"method": "POST","path": "/domain/zone/*/record"},
{"method": "POST","path": "/domain/zone/*/refresh"},
{"method": "PUT","path": "/domain/zone/*/record/"},
{"method": "DELETE","path": "/domain/zone/*/record/*"}
]
}'
{"consumerKey":"ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ","state":"pendingValidation","validationUrl":"https://eu.api.ovh.com/auth/?credentialToken=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"}
(open validation URL and follow instructions to link Application Key with account/Consumer Key)
root@proxmox:~# echo "OVH_CK=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ" >> /path/to/api-token
----
Now you can setup the the ACME plugin:
----
root@proxmox:~# pvenode acme plugin add dns example_plugin --api ovh --data /path/to/api_token
root@proxmox:~# pvenode acme plugin config example_plugin
┌────────┬──────────────────────────────────────────┐
│ key │ value │
╞════════╪══════════════════════════════════════════╡
│ api │ ovh │
├────────┼──────────────────────────────────────────┤
│ data │ OVH_AK=XXXXXXXXXXXXXXXX │
│ │ OVH_AS=YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY │
│ │ OVH_CK=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ │
├────────┼──────────────────────────────────────────┤
│ digest │ 867fcf556363ca1bea866863093fcab83edf47a1 │
├────────┼──────────────────────────────────────────┤
│ plugin │ example_plugin │
├────────┼──────────────────────────────────────────┤
│ type │ dns │
└────────┴──────────────────────────────────────────┘
----
At last you can configure the domain you want to get certificates for and
place the certificate order for it:
----
root@proxmox:~# pvenode config set -acmedomain0 example.proxmox.com,plugin=example_plugin
root@proxmox:~# pvenode acme cert order
Loading ACME account details
Placing ACME order
Order URL: https://acme-staging-v02.api.letsencrypt.org/acme/order/11111111/22222222
Getting authorization details from 'https://acme-staging-v02.api.letsencrypt.org/acme/authz-v3/33333333'
The validation for example.proxmox.com is pending!
[Wed Apr 22 09:25:30 CEST 2020] Using OVH endpoint: ovh-eu
[Wed Apr 22 09:25:30 CEST 2020] Checking authentication
[Wed Apr 22 09:25:30 CEST 2020] Consumer key is ok.
[Wed Apr 22 09:25:31 CEST 2020] Adding record
[Wed Apr 22 09:25:32 CEST 2020] Added, sleep 10 seconds.
Add TXT record: _acme-challenge.example.proxmox.com
Triggering validation
Sleeping for 5 seconds
Status is 'valid'!
[Wed Apr 22 09:25:48 CEST 2020] Using OVH endpoint: ovh-eu
[Wed Apr 22 09:25:48 CEST 2020] Checking authentication
[Wed Apr 22 09:25:48 CEST 2020] Consumer key is ok.
Remove TXT record: _acme-challenge.example.proxmox.com
All domains validated!
Creating CSR
Checking order status
Order is ready, finalizing order
valid!
Downloading certificate
Setting pveproxy certificate and key
Restarting pveproxy
Task OK
----
[[sysadmin_certs_acme_switch_from_staging]]
Example: Switching from the `staging` to the regular ACME directory
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Changing the ACME directory for an account is unsupported, but as {pve}
supports more than one account you can just create a new one with the
production (trusted) ACME directory as endpoint. You can also deactivate the
staging account and recreate it.
// TODO: add example with account screenshot here
.Example: Changing the `default` ACME account from `staging` to directory using `pvenode`
----
root@proxmox:~# pvenode acme account deactivate default
Renaming account file from '/etc/pve/priv/acme/default' to '/etc/pve/priv/acme/_deactivated_default_4'
Task OK
root@proxmox:~# pvenode acme account register default example@proxmox.com
Directory endpoints:
0) Let's Encrypt V2 (https://acme-v02.api.letsencrypt.org/directory)
1) Let's Encrypt V2 Staging (https://acme-staging-v02.api.letsencrypt.org/directory)
2) Custom
Enter selection: 0
Terms of Service: https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf
Do you agree to the above terms? [y|N]y
...
Task OK
----
View Git Blame Copy Permalink