mirror of
				git://git.proxmox.com/git/pve-docs.git
				synced 2025-10-31 04:23:45 +03:00 
			
		
		
		
	
		
			
				
	
	
		
			33 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			33 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| `--dest` `<string>` ::
 | |
| 
 | |
| Restrict packet destination address. This can refer to a single IP address, an IP set ('+ipsetname') or an IP alias definition. You can also specify an address range like '20.34.101.207-201.3.9.99', or a list of IP addresses and networks (entries are separated by comma). Please do not mix IPv4 and IPv6 addresses inside such lists.
 | |
| 
 | |
| `--dport` `<string>` ::
 | |
| 
 | |
| Restrict TCP/UDP destination port. You can use service names or simple numbers (0-65535), as defined in '/etc/services'. Port ranges can be specified with '\d+:\d+', for example '80:85', and you can use comma separated list to match several ports or ranges.
 | |
| 
 | |
| `--icmp-type` `<string>` ::
 | |
| 
 | |
| Specify icmp-type. Only valid if proto equals 'icmp' or 'icmpv6'/'ipv6-icmp'.
 | |
| 
 | |
| `--iface` `<string>` ::
 | |
| 
 | |
| Network interface name. You have to use network configuration key names for VMs and containers ('net\d+'). Host related rules can use arbitrary strings.
 | |
| 
 | |
| `--log` `<alert | crit | debug | emerg | err | info | nolog | notice | warning>` ::
 | |
| 
 | |
| Log level for firewall rule.
 | |
| 
 | |
| `--proto` `<string>` ::
 | |
| 
 | |
| IP protocol. You can use protocol names ('tcp'/'udp') or simple numbers, as defined in '/etc/protocols'.
 | |
| 
 | |
| `--source` `<string>` ::
 | |
| 
 | |
| Restrict packet source address. This can refer to a single IP address, an IP set ('+ipsetname') or an IP alias definition. You can also specify an address range like '20.34.101.207-201.3.9.99', or a list of IP addresses and networks (entries are separated by comma). Please do not mix IPv4 and IPv6 addresses inside such lists.
 | |
| 
 | |
| `--sport` `<string>` ::
 | |
| 
 | |
| Restrict TCP/UDP source port. You can use service names or simple numbers (0-65535), as defined in '/etc/services'. Port ranges can be specified with '\d+:\d+', for example '80:85', and you can use comma separated list to match several ports or ranges.
 | |
| 
 |