pve-manager/bridgevlanport

#!/bin/sh

if [ ! -x /sbin/bridge ]
then
  exit 0
fi

if [ "$MODE" = "start" ] ; then
  case "$IFACE" in
    *.[0-9]*)
      VLANID="${IFACE##*.}"
      IF_VLAN_RAW_DEVICE="${IFACE%.*}"
    ;;
  esac

  if [ -n "$IF_VLAN_RAW_DEVICE" ]; then
      if [ -e "/sys/class/net/$IF_VLAN_RAW_DEVICE/bridge/vlan_filtering" ]; then 
          bridge vlan add dev $IF_VLAN_RAW_DEVICE vid $VLANID self
      fi
  fi
fi
add vlan aware ifupdown script v3 This add support to enable vlan aware bridge, and management interfaces example: 1 bridge and 1 administration port on vlan 100 auto vmbr0 iface vmbr0 inet manual bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_vlan_aware yes bridge_vids 10-15 auto vmbr0.100 iface vmbr0.100 inet static address X.X.X.X netmask 255.255.255.0 gateway X.X.X.X bridge_vids is optional, and allow on the specified vlans.(current take 1 value or range, need to be improve with list) If not specified, the allowed vlan are 2-4094. vlan 1 is the default pvid. (all untagged traffic is going to this vlan). scripts: - /etc/network/if-up.d/bridgevlan manage bridge vlan aware configuration - /etc/network/if-up.d/bridgevlanport manage bridge vlan admin port -/etc/network/if-pre-up.d/vlan -/etc/network/if-post-down.d/vlan replace current vlan package, without vconfig usage and cleanups It's only needed to create vlan interface from bridge_ports. Signed-off-by: Alexandre Derumier <aderumier@odiso.com> 2015-07-29 05:42:42 +03:00			`#!/bin/sh`

			`if [ ! -x /sbin/bridge ]`
			`then`
			`exit 0`
			`fi`

			`if [ "$MODE" = "start" ] ; then`
			`case "$IFACE" in`
			`.[0-9])`
bridgevlanport: replace sed pipe with substitution The previous code stripped all combinations of zero or more letters and digits followed by a dot of an interface name to retrieve the VLANID. At the same time the supposedly opposite code for IF_VLAN_RAW_DEVICE only actually extracts the part up to the first dot. Thus an interface named 'a.b.0' would have a VLANID of 0 and a raw device name of just 'a'. I also don't see a reason to limit the removed portions to alphanumeric characters. I.e. an interface named tap-test.0 would result in a VLANID of 'tap-0' and an IF_VLAN_RAW_DEVICE of 'test'. A simple shell substitution seems to do a much better job and is more efficient than forking out two processes with a pipe. 2015-08-10 12:48:52 +03:00			`VLANID="${IFACE##*.}"`
			`IF_VLAN_RAW_DEVICE="${IFACE%.*}"`
add vlan aware ifupdown script v3 This add support to enable vlan aware bridge, and management interfaces example: 1 bridge and 1 administration port on vlan 100 auto vmbr0 iface vmbr0 inet manual bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_vlan_aware yes bridge_vids 10-15 auto vmbr0.100 iface vmbr0.100 inet static address X.X.X.X netmask 255.255.255.0 gateway X.X.X.X bridge_vids is optional, and allow on the specified vlans.(current take 1 value or range, need to be improve with list) If not specified, the allowed vlan are 2-4094. vlan 1 is the default pvid. (all untagged traffic is going to this vlan). scripts: - /etc/network/if-up.d/bridgevlan manage bridge vlan aware configuration - /etc/network/if-up.d/bridgevlanport manage bridge vlan admin port -/etc/network/if-pre-up.d/vlan -/etc/network/if-post-down.d/vlan replace current vlan package, without vconfig usage and cleanups It's only needed to create vlan interface from bridge_ports. Signed-off-by: Alexandre Derumier <aderumier@odiso.com> 2015-07-29 05:42:42 +03:00			`;;`
			`esac`

			`if [ -n "$IF_VLAN_RAW_DEVICE" ]; then`
			`if [ -e "/sys/class/net/$IF_VLAN_RAW_DEVICE/bridge/vlan_filtering" ]; then`
			`bridge vlan add dev $IF_VLAN_RAW_DEVICE vid $VLANID self`
			`fi`
			`fi`
			`fi`