IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
between QEMU less than 7.2 and QEMU 7.2 without the fix (both
directions are affected).
As mentioned in the patch message, this fix itself will break
migration between QEMU 7.2 and QEMU 7.2 with the fix (in both
directions, if a virtio-rng device is attached), but this is fine,
because no pve-qemu-kvm package with QEMU 7.2 has been publicly
released yet.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Two for virtio-mem and one for vIOMMU. Both features are not yet
exposed in PVE's qemu-server, but planned to be added.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Avoids a patch and is required to compile when not all patches are
applied. No functional change is intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Commit d03e1b3 ("update submodule and patches to 7.2.0") argued that
slirp is not explicitly supported in PVE, but that is not true. In
qemu-server, user networking is supported (via CLI/API) when no bridge
is set on a virtual NIC. So slirp needs to stay to keep such NICs
working.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Otherwise, it depends on whether libslirp-devel is installed or not.
See the previous commit message for more context.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
User-facing breaking change:
The slirp submodule for user networking got removed. It would be
necessary to add the --enable-slirp option to the build and/or install
the appropriate library to continue building it. Since PVE is not
explicitly supporting it, it would require additionally installing the
libslirp0 package on all installations and there is *very* little
mention on the community forum when searching for "slirp" or
"netdev user", the plan is to only enable it again if there is some
real demand for it.
Notable changes:
* The big change for this release is the rework of job locking, using
a job mutex and introducing _locked() variants of job API functions
moving away from call-side AioContext locking. See (in the qemu
submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and
remove Aiocontext locks") and previous commits for context.
Changes required for the backup patches:
* Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job
API functions where appropriate (many are only availalbe as
a _locked() variant).
* Remove acquiring/releasing AioContext around functions taking the
job mutex lock internally.
The patch introducing sequential transaction support for jobs needs
to temporarily unlock the job mutex to call job_start() when
starting the next job in the transaction.
* The zeroinit block driver now marks its child as primary.
The documentation in include/block/block-common.h states:
> Filter node has exactly one FILTERED|PRIMARY child, and may have
> other children which must not have these bits
Without this, an assert will trigger when copying to a zeroinit target
with qemu-img convert, because bdrv_child_cb_attach() expects any
non-PRIMARY child to be not FILTERED:
> qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw
> qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion
> `!(child->role & BDRV_CHILD_FILTERED)' failed.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
albeit I was short from disarming that GLOBAL_STATE_CODE assert
completely, as its just bogus to assert that on runtime for a lot of
call sites, rather it should be verified on compilation (function
coloring with attributes and maybe a compiler plugin).
But, as this is already solved upstream lets take in that patch.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes file restore, where we actively unlink the PID file of the
transient VM ourself after opening it - while we use it only for
tracking when the QEMU process itself has finished start up, it's
easier and cleaner to fix this regression now, than to rework that to
something that doesn't depends on the PID file at all.
Applying Fiona's patch as patch-patch tracked under extra, as I
expect that something similar to this gets accepted upstreamed.
Link: https://lists.proxmox.com/pipermail/pve-devel/2022-October/054448.html
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The documentation in include/io/channel.h states that -1 or
QIO_CHANNEL_ERR_BLOCK should be returned upon error. Simply passing
along the return value from the blk-functions has the potential to
confuse the call sides. Non-blocking mode is not implemented
currently, so -1 it is.
The "return ret" was mistakenly left over from the previous
QEMUFileOps based implementation. Also, use error_setg_errno(), since
the blk(_co)_p{readv,writev} functions return errno codes.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
to be in-line with what other implementations in QEMU do. Commit
1d39c7098bbfa6862cb96066c4f8f6735ea397c5 mentions the EIO bit and
the function is expected to return 0 upon success (see other
implementations).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Notable changes:
* The only big change is the switch to using a custom QIOChannel for
savevm-async, because the previously used QEMUFileOps was dropped.
Changes to the current implementation:
* Switch to vector based methods as required for an IO channel. For
short reads the passed-in IO vector is stuffed with zeroes at the
end, just to be sure.
* For reading: The documentation in include/io/channel.h states that
at least one byte should be read, so also error out when whe are
at the very end instead of returning 0.
* For reading: Fix off-by-one error when request goes beyond end.
The wrong code piece was:
if ((pos + size) > maxlen) {
size = maxlen - pos - 1;
}
Previously, the last byte would not be read. It's actually
possible to get a snapshot .raw file that has content all the way
up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any
trailing zero bytes (I wrote a script to do it).
Luckily, it didn't cause a real issue, because qemu_loadvm_state()
is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION)
section. The buffer for reading it is simply freed up afterwards
and the function will assume that it read the whole section, even
if that's not the case.
* For writing: Make use of the generated blk_pwritev() wrapper
instead of manually wrapping the coroutine to simplify and save a
few lines.
* Adapt to changed interfaces for blk_{pread,pwrite}:
* a9262f551e ("block: Change blk_{pread,pwrite}() param order")
* 3b35d4542c ("block: Add a 'flags' param to blk_pread()")
* bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success")
Those changes especially affected the qemu-img dd patches, because
the context also changed, but also some of our block drivers used
the functions.
* Drop qemu-common.h include: it got renamed after essentially
everything was moved to other headers. The only remaining user I
could find for things dropped from the header between 7.0 and 7.1
was qemu_get_vm_name() in the iscsi-initiatorname patch, but it
already includes the header to which the function was moved.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This version string can be queried with $BINARY --version as well as
the query-version QMP command.
Useful for qemu-server to be able to report the running QEMU version
exactly. Could also be used to version guard against features as an
alternative to the query-proxmox-support QMP command.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Without this change, it's necessary to send a second savevm-end QMP
command after aborting a snaphsot, before a new savevm-start QMP
command can succeed.
In process_savevm_finalize(), no longer set an error in the abort
scenario. If there already is another error, there's no need to
override it. If canceling was done intentionally, qmp_savevm_end()
is responsible for setting the state now.
Reported-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reported in the community forum[0].
For 6.1.0, there were a few changes to the coroutine-sleep API, but
the adaptations in f376b2b ("update and rebase to QEMU v6.1.0") made
a mistake.
Currently, target_close_wait is NULL when passed to
qemu_co_sleep_ns_wakeable(), which further passes it to
qemu_co_sleep(), but there, it is dereferenced when trying to access
the 'to_wake' member:
> Thread 1 "kvm" received signal SIGSEGV, Segmentation fault.
> qemu_co_sleep (w=0x0) at ../util/qemu-coroutine-sleep.c:57
To fix it, create a proper struct and pass its address instead. Also
call qemu_co_sleep_wake unconditionally, because the NULL check (for
the 'to_wake' member) is done inside the function itself.
This patch is based on what the QEMU commits introducing the changes
to the coroutine-sleep API did to the callers in QEMU:
eaee072085 ("coroutine-sleep: allow qemu_co_sleep_wake that wakes nothing")
29a6ea24eb ("coroutine-sleep: replace QemuCoSleepState pointer with struct in the API")
[0]: https://forum.proxmox.com/threads/112130/
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
For the io_uring patch, it's not very clear which configurations can
trigger it, but it should be rather uncommon. See qemu commit
be6a166fde652589761cf70471bcde623e9bd72a for a bit more information.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
coming in via qemu-stable (except for the vdmk fix, which was tagged
for-7.0 on the qemu-devel list, but didn't make it into the release).
Also took the chance to switch the gluster fix to the version that
made it into upstream.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
See QEMU commits 9e8be4c546ce8469ca9702715bf8f198d604b685 and
a5730b8bd3675f484ed0eacea052452048eeb35d for more information.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Only very minor changes needed:
* Most patches in extra (or some version of them) are part of 7.0.0.
* aio_set_fd_handler got an extra parameter, but can just pass NULL
like we did for the related 'poll' parameter. See QEMU commit
826cc32423db2a99d184dbf4f507c737d7e7a4ae for more.
* Add include for qemu/memalign.h in vma.c and vma-writer.c.
* Add reverts for fixups of already reverted 0347a8fd4c ("block/rbd:
implement bdrv_co_block_status") that came in with 7.0.0. Those
fixups are not enough, see Proxmox bugzilla #4047.
* Two trivial context changes for bitmap-mirror patches.
* block_int.h got split up into multiple headers.
* Some context changes in configure and meson.build.
* Used the oppurtunity to squash fixup of bdrv_backuo_dump_create typo
in a later patch into the patch introducing the function (had to
move code to new header during rebase).
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
