IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
One of the smaller annoyances, especially for less experienced users, is
the fact, that when creating a local storage (ZFS, LVM (thin), dir) in a
cluster, one can only leave the "Add Storage" option enabled the first
time.
On any following node, this option needed to be disabled and the new
node manually added to the list of nodes for that storage.
This patch changes the behavior. If a storage of the same name already
exists, it will verify that necessary parameters match the already
existing one.
Then, if the 'nodes' parameter is set, it adds the current node and
updates the storage config.
In case there is no nodes list, nothing else needs to be done, and the
GUI will stop showing the question mark for the configured, but until
then, not existing local storage.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
If a storage of that type and name already exists (LVM, zpool, ...) but
we do not have a Proxmox VE Storage config for it, it is possible that
the creation will fail midway due to checks done by the underlying
storage layer itself. This in turn can lead to disks that are already
partitioned. Users would need to clean this up themselves.
By adding checks early on, not only checking against the PVE storage
config, but against the actual storage type itself, we can die early
enough, before we touch any disk.
For ZFS, the logic to gather pool data is moved into its own function to
be called from the index API endpoint and the check in the create
endpoint.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
returns a list of mounted paths with the backing devices
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
The default timeout in PVE/RADOS.pm is 5 seconds, but this is not
always enough for external clusters under load. Workers can and should
take their time to not fail here too quickly.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In preparation to increase the timeout for workers. Both existing
callers of librados_connect() don't currently use the parameter.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The return value of get_rbd_dev_path() is only used when $scfg->{krbd}
evaluates to true and the function shouldn't have any side effects
that are needed later, so the call can be avoided otherwise.
This also saves a RADOS connection and command with configurations for
external clusters with krbd disabled.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
When switching this from calling the external binary to
using the perl api client the timeout got reduced to 7
seconds, which is definitely insufficient for larger stores.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
while the resulting backups are encrypted, they would not be restorable
using the master key (only) if the original PVE system is lost.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
if the key file doesn't exist (anymore), but the storage.cfg references
one, die on commands that should use encryption instead of falling back
to plain-text operations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tested-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Before af07f67 ("pbs: use vmid parameter in list_snapshots") the
namespace was set via do_raw_client_command, but now it needs to be
set explicitly here.
Fixes: af07f67 ("pbs: use vmid parameter in list_snapshots")
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Particularly for operations such as pruning backups after a
scheduled backups we do not want to list the entire
store.
(pbs_api_connect is moved up unmodified)
Note that the 'snapshots' CLI command only takes a full
group, but the API does allow specifying a backup-id without
a backup-type!
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
this allows setting notes+protected for backups on btrfs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
by refactoring it into a helper and use that.
With this, we can omit the 'update_volume_notes' in subclasses
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and refactored usages for .log and .notes with them.
At some parts in the test case code I had to source new variables to
shorten the line length to not exceed the 100 column line limit.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This improves handling when two archive remove calls are creating a
race condition where one would formerly encounter an error. Now both
finish successfully.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
When a VM or Container backup was deleted, the .notes file was not
removed, therefore, over time the dump folder would get polluted with
notes for backups that no longer existed. As backup names contain a
timestamp and as the notes cannot be reused because of this, I think
it is safe to just delete them just like we do with the .log file.
Furthermore, I sourced the deletion of the log and notes file into a
new function called "archive_auxiliaries_remove". Additionally, the
archive_info object now returns one more field containing the name of
the notes file. The test cases have to be adapted to expect this new
value as the package will not compile otherwise.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The changes in cfe46e2d4a git not catch
all situations.
In the case of a guest having 2 disk images with the same name on a pool
with the same name but in two different ceph clusters we still had
issues when starting it. The first disk got mapped as expected. The
second disk did not get mapped because we returned the old $path to
"/dev/rbd/<pool>/<image>" because it already existed from the first
disk.
In the case that only the "old" /dev/rbd path exists and we do not have
the /dev/rbd-pve/<cluster>/... path available, we now check if the
cluster fsid used by that rbd device matches the one we expect. If it
does, then we are in the situation that the image has been mapped before
the new rbd-pve udev rule was introduced. If it does not, then we have
the situation of an ambiguous mapping in /dev/rbd and return the
$pve_path.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
When a data-pool is configured, use it for status infos. The 'data-pool'
config option is used to mark the erasure coded pool while the 'pool'
will be the replicated pool holding meta data such as the omap.
This means, the 'pool' will only use a small amount of space and people
are interested how much they can store in the erasure coded pool anyway.
Therefore this patch reorders the assignment of the used pool name by
availability of the scfg parameters: data-pool -> pool -> fallback 'rbd'
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
happens in case of a mistyped poolname, and the new message should be
more helpful than:
`Use of uninitialized value $free in addition (+) at \
/usr/share/perl5/PVE/Storage/RBDPlugin.pm line 64`
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
the fallback to a default pool name of 'rbd' was introduced in:
1440604a4b
and worked for the status command, because it used the `rados_cmd`
sub.
This fallback was lost with the changes in:
41aacc6cde
leading to confusing errors:
`Use of uninitialized value in string eq at \
/usr/share/perl5/PVE/Storage/RBDPlugin.pm line 633`
(e.g. in the journal from pvestatd)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
to avoid calls into RADOS connect, that trigger RPCEnv not
initialized breakage in regression tests, but wouldn't really work
otherwise either
in the future the RBD $scfg could actually support this (or similarly
named) property, to safe on storage addition and then avoid frequent
mon commands
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When krbd is used, subsequent removal after an an operation
involving a rename could fail with
> librbd::image::PreRemoveRequest: 0x559b7506a470 \
> check_image_watchers: image has watchers - not removing
because the old mapping was still present.
For both operations with a rename, the owning guest should be offline,
but even if it weren't, unmap simply fails when the volume is in-use.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
it only redirected to get_rbd_dev_path with the same signature and both
are private subs..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the new udev rule is expected to be in place and active, switching the
checks around means 1 instead of 2 stat()s in this rather hot code path.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
By adding our own customized rbd udev rules and ceph-rbdnamer we can
create device paths that include the cluster fsid and avoid any
ambiguity if the same pool and namespace combination is used in
different clusters we connect to.
Additionally to the '/dev/rbd/<pool>/...' paths we now have
'/dev/rbd-pve/<cluster fsid>/<pool>/...' paths.
The other half of the patch makes use of the new device paths in the RBD
plugin.
The new 'get_rbd_dev_path' method the full device path. In case that the
image has been mapped before the rbd-pve udev rule has been installed,
it returns the old path.
The cluster fsid is read from the 'ceph.conf' file in the case of a
hyperconverged setup. In the case of an external Ceph cluster we need to
fetch it via a rados api call.
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
When writing into the file, explicitly utf8 encode it, and then try
to utf8 decode it on read.
If the notes are not valid utf8, we assume they were iso-8859 encoded
and return as is.
Technically this is a breaking change, since there are iso-8859
comments that would successfully decode as utf8, for example: the
byte sequence "C2 A9" would be "£" in iso, but would decode to "£".
From what i can tell though, this is rather unlikely to happen for
"real world" notes, because the first byte would be in the range of
C0-F7 (which are mostly language dependent characters like "Â") and
the following bytes would have to be in the range of 80-BF, which are
only special characters like "£" (or undefined)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With 30s we got for sync api calls 10s leaves still enough room for
answering and other stuff.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since most zfs operations can take a while (under certain conditions),
increase the minimum timeout for zfs_request in workers to 5 minutes.
We cannot increase the timeouts in synchronous api calls, since they are
hard limited to 30 seconds, but in worker we do not have such limits.
The existing default timeout does not change (60minutes in worker,
5seconds otherwise), but all zfs_requests with a set timeout (<5minutes)
will use the increased 5 minutes in a worker.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
