IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
stores the regex definition in PVE::Storage.
One test had to be adapted because it tested obsolete code. Namely:
it expects vztmpl to only end with .tar.gz, but the new regex also
includes .tar.xz, there is nothing against allowing .tar.xz files as
vztmpl files.
Signed-off-by: Lorenz Stechauner <l.stechauner@proxmox.com>
This test is intended to be run on a hyperconverged PVE cluster to test
the most common operations of VMs using a namespaced Ceph RBD pool.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
for some controllers/disks there the line is
Percentage used endurance indicator: x%
so extend the regex for that possibilty.
We even had a test-case for SAS but did not notice we could extract
that info from there...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
copied from test 'sas' with rotational set to 0
this has then the type 'ssd', rpm: 0, and health: 'OK'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
In a very early version I wanted to parse the date from the backup
name, and when switching to using the ctime and localtime() instead,
I forgot to update the usage of strftime.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This needs to happen in a separate loop, because some time intervals are not
subsets of others, i.e. weeks and months. Previously, with a daily backup
schedule, having:
* a backup on Sun, 06 Dec 2020 kept by keep-daily
* a backup on Sun, 29 Nov 2020 kept by keep-weekly
would lead to the backup on Mon, 30 Nov 2020 to be selected for keep-monthly,
because the iteration did not yet reach the backup on Sun, 29 Nov 2020 that
would mark November as being covered.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Provides recent test data for disk_tests/ssd_smart/sde_smart. The
previous data was created using an older smartmontools version, which
did not yet support the drive and therefore had bogus attribute mapping.
Signed-off-by: Jan-Jonas Sämann <sprinterfreak@binary-kitchen.de>
Implement it for generic storages supporting backups
(i.e. directory-based storages) and add a wrapper for PBS.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Because we always have 4-digit years, we can simply pass
the year itself to timelocal instead of subtracting 1900.
Like this it will also work for years not in the range 2000-2999.
See also:
https://perldoc.perl.org/Time/Local.html#Year-Value-Interpretation
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Only expect the logfilename if the archive has a standard name.
This also gives a mechanism to get an untainted filename.
archive_info can take either a volume ID or a path as it's
currently implemented. This is useful for vzdump when there
is no storage (i.e. for 'vzdump --dumpdir'). Add a test case for this.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
where 'is_std_name' shows whether the backup name uses the standard naming
schema and most likely was created by our tools.
Also adds a '^' to the existing filename matching regex, which
should be fine since basename() is used beforehand.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
when compiling the disk list add a property with a stable
/dev/disk/by-id/ path for a block device when available.
This is needed to create zpools with the stable by-id links
The /dev/disk/by-id/ directory can contain multiple links to the same device
(e.g. when it's used as a LVM PV, or one for the wwn/nvme-eui in addition
to the one with vendor and serial). We take the first one which matches
the bus where the disk is attached. For nvme disks we exclude the one
containing the nvme-eui.
The patch assumes that not all disks need to have such a link (e.g.
virtio-block devices as we pass them to guests).
Additionally the tests were adapted to run successfully.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
we want to enforce at least the strictness that our tools can do
something with a backup archive..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
nothing worse than jumping test results due to not sorting the tests
and thus making discussions harder (which test # failed) and it may
imply another error by mistake.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We could also do a hash array slice, like:
> my ($archive, $expected, $description) = $tt->@{'archive', 'expected', 'description'};
But as none are optional lets just access values directly..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The rework of the backup file detection logic missed the non-standard
file name case. This patch allows to restore backups with different file
names. Though the config extraction fails, since the type is unknown.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
since it is a valid content type and adapt the path_to_volume_id_test.
Also adds an extra check if all vtype_subdirs are returned.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
The vzdump file was passed with the full path to the regex. That regex
captures the time from the file name, to calculate the epoch.
As the regex didn't match, the ctime from stat was taken instead. This
resulted in the ctime shown when the file was changed, not when the
backup was made.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Test to reduce the potential for accidental breakage on regex changes.
Co-Authored-by: Dominic Jaeger <d.jaeger@proxmox.com>
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Test to reduce the potential for accidental breakage on regex changes.
And to make sure that all vtype_subdirs are parsed.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
detection into separate functions so they are reusable and easier
modifiable. This patch also adds the test for archive_info.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
When adding a zfspool storage with 'pvesm add' the mount point is now
added automatically to the storage configuration if it can be
determined. path() does not assume the default mountpoint anymore,
fixing 2085.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
and actually do that not just for creating zvols, but also when
activating them. this should fix a range of issues/races that sometimes
occured on bootup, snapshot rollback or similar operations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we can only do this here, since the ceph cluster is not aware of
osd encryption, only the local node is (via ceph-volume and lv tags)
this way, we are able to show an 'encrypted' flag in the disk gui at least
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
sdd1 and sdd2 were listed in the zfs output but were not included
in the partlist, so the zfs detection test was wrong
now it is correct and more in line with the real world
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
previously ceph included a udev rule to populate
/dev/disk/by-parttypeuuid/
but not anymore, so we now use 'lsblk --json -o path,parttype' to
get a mapping between parttype uuid and partition
fix the test by simulating empty lsblk output
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
