IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
(also fixes#3011)
Deprecates the old-style 'boot' and 'bootdisk' options by adding a new
'order=' subproperty to 'boot'.
This allows a user to specify more than one disk in the boot order,
helping with newer versions of SeaBIOS/OVMF where disks without a
bootindex won't be initialized at all (breaks soft-raid and some LVM
setups).
This also allows specifying a bootindex for USB and hostpci devices,
which was not possible before. Floppy boot support is not supported in
the new model, but I doubt that will be a problem (AFAICT we can't even
attach floppy disks to a VM?).
Default behaviour is intended to stay the same, i.e. while new VMs will
receive the new 'order' property, it will be set so the VM starts the
same as before (using get_default_bootorder).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The format is unused in this commit, but will replace the current
string-based format of the 'boot' property. It is included since the
parameter of bootorder_from_legacy follows it.
Two helper methods are introduced:
* bootorder_from_legacy: Parses the legacy format into a hash closer to
what the new format represents
* get_default_bootdevices: Encapsulates the legacy default behaviour if
nothing is specified in the boot order
resolve_first_disk is simplified and gets a new $cdrom parameter to
control the behaviour of excluding CD-ROMs or instead searching for only
them.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
We already keep hugepages if they are created with the kernel
commandline (hugepagesz=x hugepages=y), but some setups (specifically
hugepages across multiple NUMA nodes) cannot be configured that way.
Since we always clear these hugepages at VM shutdown, rebooting a VM
that uses them might not work, since the requested count might not be
available anymore by the time we want to use them (also, we would then
no longer allocate them correctly on the NUMA nodes).
Add a 'keephugepages' parameter to skip cleanup and simply leave them
untouched.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
until we maybe have a 'pbs-backup' that links Qemu and PBS like
'pbs-restore', we need to do a regular backup for the template case to
support all storage types and image formats.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Otherwise a warning is printed if the bios is not set in the config.
reported via community forum:
https://forum.proxmox.com/threads/warning-in-qemuserver.74683/
reproduced and tested that the patch fixes the issue.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Edid support was added with Qemu 5. Windows guests seem to not be able
to get all possible resolutions if the default std VGA device is used as
GPU and the VM boots in BIOS mode. The result is that only one of the
following three resolutions can be configured:
800x600
1024x768
1920x1080
It is important to note that just booting a Windows VM with the edid=off
parameter will not make the large list of resolutions available. It
seems that Windows is caching the list of possible resolutions
somewhere [0].
Uninstalling the 'Microsoft Basic Display Adapter' in the device manager
and rebooting the VM is one way I found to force Windows to recreate the
list of possible resolutions.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
[0] https://lists.nongnu.org/archive/html/qemu-devel/2020-07/msg07128.html
In config_to_command, '-loadstate' will be added whenever there is a
vmstate in the config. But in vm_start_nolock, the resume parameter
is used to calculate the appropriate timeout and to remove the vmstate
after the start. The resume parameter was only set if there is a
'suspended' lock, but apparently [0] we cannot rely on the lock to be
set if and only if there is a vmstate.
[0]: https://forum.proxmox.com/threads/task-error-start-failed.72450
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
during refactoring, the vmid got lost, but is necessary to get
the correct mdev id
Fixes commit 74c17b7a23
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ reference fixed commit ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
pbs-restore might not stay there like that forever and if
this code path changes we should remember to also remove the
environment variables
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Pass new size directly, so the function doesn't need to know about
how some hash is organized. And return a message directly, instead
of both size-strings. Also dropped the wantarray, because both
existing callers use the message anyways.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Legacy IGD passthrough requires address 00:1f.0 to not be assigned to
anything on QEMU startup (currently it's assigned to bridge pci.2).
Changing this in general would break live-migration, so introduce a new
hostpci parameter "legacy-igd", which if set to 1 will move that bridge
to be nested under bridge 1.
This is safe because:
* Bridge 1 is unconditionally created on i440fx, so nesting is ok
* Defaults are not changed, i.e. PCI layout only changes when the new
parameter is specified manually
* hostpci forbids migration anyway
Additionally, the PT device has to be assigned address 00:02.0 in the
guest as well, which is usually used for VGA assignment. Luckily, IGD PT
requires vga=none, so that is not an issue either.
See https://git.qemu.org/?p=qemu.git;a=blob;f=docs/igd-assign.txt
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
netdev_add is now a proper qmp command, which means that it verifies
the parameter types properly
instead of sending strings, we now have to choose the correct
types for the parameters
bool for vhost
and uint64 for queues
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the special case was dropped when moving this to pve-storage.
fixes commit c6d517835a
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes commit 940e2a3a06
QEMU 4.1 will fail to start a guest with an audio device set with:
> Property '.audiodev' not found
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
If /dev/hwrng exists, but no actual generator is connected (or it is
disabled on the host), QEMU will happily start the VM but crash as soon
as the guest accesses the VirtIO RNG device.
To prevent this unfortunate behaviour, check if a useable hwrng is
connected to the host before allowing the VM to be started.
While at it, clean up config_to_command by moving new and existing rng
source checks to a seperate sub.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
It's possible to have a VM with OVMF but without an efidisk, so don't
call parse_drive on a potential undef value.
Partial revert of 818c3b8d91 ("cfg2cmd: ovmf: code cleanup")
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
lock_file is used by PVE::QemuServer::Memory, but it does properly 'use
PVE::Tools ...' itself so we can drop them in the main module.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
regex to reduce the code duplication, as archive_info and
decompressor_info provides the same information as well.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
and refactor the test_volid closure. Like this get_replicatable_volumes doesn't
need a separate loop for unused volumes anymore. For get_vm_volumes, which is used
for activation/deactivation of volumes at migration and deactivation in vm_stop_cleanup,
includes those volumes now. For migration it's an improvement, because those volumes
might need to be migrated and for vm_stop_cleanup it shouldn't hurt. The last user
of foreach_volid is check_vm_disks_local used by migrate_vm_precondition,
where information about the additional volumes doesn't hurt either.
Note that replicate is (still) set by default, so the behavior for
get_replicatable_volumes for unused volumes should not change.
Hibernation vmstate files are now also included and recognized as 'is_vmstate'.
The 'size' attribute will not be overwritten by subsequent iterations for the
same volid anymore (a volid may appear both in the config and in snapshots),
so the size from the current config is now preferred.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
when a backup includes a cloudinit disk on a non-existent storage,
the restore fails with 'storage' does not exist
this happens because we want to get the format of the disk, by
checking the source storage
we fix this by using the target storage first and only the source as
fallback
this will still fail if neither storage exists
(which is ok, since we cannot restore then anyway)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With Qemu 4.2 a new `audiodev` property was introduced [0] to explicitly
specify the backend to be used for the audio device. This is accompanied
with a warning that the fallback to the default audio backend is
deprecated.
[0] https://wiki.qemu.org/ChangeLog/4.2#Audio
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This makes it possible to migrate a VM with volumes store1:vm-123-disk-0
store2:vm-123-disk-0 to some targetstorage. Also prevents migration failure
when there is an orphaned disk with the same volid on the target.
To avoid confusion, the name should not change for 'vmstate'-volumes.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
It was necessary to move foreach_volid back to QemuServer.pm
In VZDump/QemuServer.pm and QemuMigrate.pm the dependency on
QemuConfig.pm was already there, just the explicit "use" was missing.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Upstream marks these as having a micro-version of >=90, unfortunately the
machine versions are bumped earlier so testing them is made unnecessarily
difficult, since the version checking code would abort on migrations etc...
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[ Thomas: do so refactor ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so that pve-container and qemu-server use the same one, in preparation
for moving it to JSONSchema and having a bridgepair format.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Just like with live-migration, custom CPU models might change after a
snapshot has been taken (or a VM suspended), which would lead to a
different QEMU invocation on rollback/resume.
Save the "-cpu" argument as a new "runningcpu" option into the VM conf
akin to "runningmachine" and use as override during rollback/resume.
No functional change with non-custom CPU types intended.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This is required to support custom CPU models, since the
"cpu-models.conf" file is not versioned, and can be changed while a VM
using a custom model is running. Changing the file in such a state can
lead to a different "-cpu" argument on the receiving side.
This patch fixes this by passing the entire "-cpu" option (extracted
from /proc/.../cmdline) as a "qm start" parameter. Note that this is
only done if the VM to migrate is using a custom model (which we can
check just fine, since the <vmid>.conf *is* versioned with pending
changes), thus not breaking any live-migration directionality.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
in addition to printing it. preparation for remote cluster migration,
where we want to return this in a structured fashion over the migration
tunnel instead of parsing stdout via SSH.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
into one sub that retrieves the local disks, and the actual NBD
allocation. that way, remote incoming migration can just call the NBD
allocation with a custom list of volume names/storages/..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the syntax is backwards compatible, providing a single storage ID or '1'
works like before. the new helper ensures consistent behaviour at all
call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
as preparation of targetstorage mapping and remote migration. this also
removes re-using of the $local_volumes hash in the original code.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to start breaking up vm_start before extending parts for new migration
features like storage and network mapping.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
as preparation for refactoring it further. remote migration will add
another 1-2 parameters, and it is already unwieldly enough as it is.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
