IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixes#7487
When `.kubelet.nodeIP` filters yield no match, Talos should not start
the kubelet, as using empty address list results in `--node-ip=` empty
kubelet arg, which makes kubelet pick up "the first" address.
Instead, skip updating (creating) the nodeIP and log an explicit
warning.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
This adds basic support for shutdown/poweroff flags.
it can distringuish between halt/shutdown/reboot.
In the case of Talos halt/shutdown is same op.
Signed-off-by: Noel Georgi <git@frezbo.dev>
Use the `machined` socket for `shutdown` and `poweroff` aliases. This
ensures that worker nodes does not have to wait on apid to start.
Signed-off-by: Noel Georgi <git@frezbo.dev>
We can safely do it on `io.Writer` level, since `log.Logger.Output` (called by `Print|Printf`) pretty much promises
that every call to `Write` ends with `\n`.
Closes#7439
Signed-off-by: Dmitriy Matrenichev <dmitry.matrenichev@siderolabs.com>
For rng seed and pcr extend, let's ignore if the device is not TPM2.0
based. Seal/Unseal operations would still error out since it's
explicitly user enabled feature.
Signed-off-by: Noel Georgi <git@frezbo.dev>
The previous flow was using TPM PCR 11 values to bound the policy which
means TPM cannot unseal when UKI changes. Now it's fixed to use PCR 7
which is bound to the SecureBoot state (SecureBoot status and
Certificates). This provides a full chain of trust bound to SecureBoot
state and signed PCR signature.
Also the code has been refactored to use PolicyCalculator from the TPM
library.
Signed-off-by: Noel Georgi <git@frezbo.dev>
This is intemediate step to move parts of the `ukify` down to the main
Talos source tree, and call it from `talosctl` binary.
The next step will be to integrate it into the imager and move `.uki`
build out of the Dockerfile.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
It seems that CRI has a bit of eventual consistency, and it might fail
to remove a stopped pod failing that it's still running.
Rewrite the upgrade API call in the upgrade test to actually wait for
the upgrade to be successful, and fail immediately if it's not
successful. This should improve the test stability and it should make
it easier to find issues immediately.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Fixes#6391
Implement a set of APIs and commands to manage images in the CRI, and
pre-pull images on Kubernetes upgrades.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
The Go modules were not tagged for alpha.4, so using alpha.3 tag.
Talos 1.5 will ship with Kubernetes 1.28.0.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Fixes#7430
Introduce a set of resources which look similar to other API
implementations: CA, certs, cert SANs, etc.
Introduce a controller which manages the service based on resource
state.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Fixes#7379
Add possibility to configure the controlplane static pod resources via
APIServer, ControllerManager and Scheduler configs.
Signed-off-by: LukasAuerbeck <17929465+LukasAuerbeck@users.noreply.github.com>
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Talos now supports new type of encryption keys which rely on Sealing/Unsealing randomly generated bytes with a KMS server:
```
systemDiskEncryption:
ephemeral:
keys:
- kms:
endpoint: https://1.2.3.4:443
slot: 0
```
gRPC API definitions and a simple reference implementation of the KMS server can be found in this
[repository](https://github.com/siderolabs/kms-client/blob/main/cmd/kms-server/main.go).
Signed-off-by: Artem Chernyshev <artem.chernyshev@talos-systems.com>
Fixes#7228
Add some changes to make Talos accept partial machine configuration
without main v1alpha1 config.
With this change, it's possible to connect a machine already running
with machine configuration (v1alpha1), the following patch will connect
to a local SideroLink endpoint:
```yaml
apiVersion: v1alpha1
kind: SideroLinkConfig
apiUrl: grpc://172.20.0.1:4000/?jointoken=foo
---
apiVersion: v1alpha1
kind: KmsgLogConfig
name: apiSink
url: tcp://[fdae:41e4:649b:9303::1]:4001/
---
apiVersion: v1alpha1
kind: EventSinkConfig
endpoint: "[fdae:41e4:649b:9303::1]:8080"
```
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Previously, if META values were supplied to the Talos ISO via
environment variable, they will be written down and available after the
install. With this fix, values are also readable and available before
the installation runs (in maintenance mode).
Most of the PR is refactoring `meta.Value(s)` to be a shared library
which is used by the installer/imager and (now) Talos.
Also fixes an issue with not returning properly `NotExist` error when
META is not yet available as a partition on disk.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Some tools like qemu-guest-agent when ran as a extension service calls
`/sbin/shutdown` instead of `/sbin/poweroff`. This adds handling for the
same.
Ref: https://github.com/siderolabs/extensions/pull/173
Signed-off-by: Noel Georgi <git@frezbo.dev>
Allow specifying the reboot mode during upgrades by introducing `--reboot-mode` flag, similar to the `--mode` flag of the reboot command.
Closessiderolabs/talos#7302.
Signed-off-by: Utku Ozdemir <utku.ozdemir@siderolabs.com>
This makes handling of `exec` more flexible.
Signed-off-by: Markus Reiter <me@reitermark.us>
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
This includes sd-boot handling, EFI variables, etc.
There are some TODOs which need to be addressed to make things smooth.
Install to disk, upgrades work.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
This commit adds support for API load balancer. Quick way to enable it is during cluster creation using new `api-server-balancer-port` flag (0 by default - disabled). When enabled all API request will be routed across
cluster control plane endpoints.
Closes#7191
Signed-off-by: Dmitriy Matrenichev <dmitry.matrenichev@siderolabs.com>
Move labels out of the bootloader interface, while moving copying assets
into the bootloader interface. GRUB is using one set of assets,
`sd-boot` will be using another one.
Fix the problem with `bootloader.Probe()` finding boot partition on the
host when it runs in a priv container, fixing issues with image creation
in the CI.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
`WITH_CONFIG_PATCH_WORKER` check result was overriding any value set in `CONFIG_PATCH_FLAG` variable.
Move it to the different variable.
Signed-off-by: Dmitriy Matrenichev <dmitry.matrenichev@siderolabs.com>
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
This changes the bootloader code to be generic to support
multiple bootloader implementations.
Signed-off-by: Noel Georgi <git@frezbo.dev>
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Fixes#7233
Waiting for node readiness now happens in the `MachineStatus` controller
which won't mark the node as ready until Kubernetes `Node` is ready.
Handling cordoning/uncordining happens with help of additional resource
in `NodeApplyController`.
New controller provides reactive `NodeStatus` resource to see current
status of Kubernetes `Node`.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
See #7233
The controlplane label is simply injected into existing controller-based
node label flow.
For controlplane taint default NoScheduleTaint, additional controller &
resource was implemented to handle node taints.
This also fixes a problem with `allowSchedulingOnControlPlanes` not
being reactive to config changes - now it is.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Because `SetConfig` can be called concurrently with `Config` there is risk of data race, if something goes wrong. Since `config.Provider` is an interface type, it means its size is two machine words. And so in very unpleasant situations it can lead to arbitrary RCE, because interface variable can be in partially updated state.
Signed-off-by: Dmitriy Matrenichev <dmitry.matrenichev@siderolabs.com>
I ended up completely rewriting the controller, simplifying the flow
(somewhat) so that there's just a single control flow in the controller,
while reading from v1alpha1 events is converted to reading from a
channel.
Fixes#7227
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Fixes#7333
Also fixed the discovery service controller to reconnect the client on
config changes (previously it wasn't reactive on e.g. URL changes).
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
Use the `go-blockdevice` library to zero partitions.
Also added a test that writes `ones` to the partition and verifies its
zeroes after zeroing it.
Signed-off-by: Noel Georgi <git@frezbo.dev>
This changes the mounting/unmounting of `BOOT` partiton code into
`kexecPrepare` phase. Also skips if `BOOT` partition cannot be found.
Signed-off-by: Noel Georgi <git@frezbo.dev>
Fixes#7226
This follows same flow as other similar changes - split out logging
configuration as a separate resource, source it for now in the cmdline.
Rewrite the controller to allow multiple log outputs, add send retries.
Signed-off-by: Andrey Smirnov <andrey.smirnov@talos-systems.com>
This PR adds support for creating a list of API endpoints (each is pair of host and port).
It gets them from
- Machine config cluster endpoint.
- Localhost with LocalAPIServerPort if machine is control panel.
- netip.Addr[0] and port from affiliates if they are control panels.
For #7191
Signed-off-by: Dmitriy Matrenichev <dmitry.matrenichev@siderolabs.com>
