IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch will allow for developers to create unit tests for
their code. Documentation has been added to the patch and
is available here:
doc/hacker-guide/en-US/markdown/unittest.md
Also, unit tests are run when RPM is created.
BUG: 1067059
Change-Id: I95cf8bb0354d4ca4ed4476a0f2385436a17d2369
Signed-off-by: Vijay Bellur <vbellur@redhat.com>
Signed-off-by: Luis Pabon <lpabon@redhat.com>
Reviewed-on: http://review.gluster.org/7145
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Justin Clift <justin@gluster.org>
Tested-by: Justin Clift <justin@gluster.org>
According to libtool three individual numbers stand for
CURRENT:REVISION:AGE, or C:R:A for short. The libtool
script typically tacks these three numbers onto the end
of the name of the .so file it creates. The formula for
calculating the file numbers on Linux and Solaris is
/path/to/library/<library_name>.(C - A).(A).(R)
As you release new versions of your library, you will
update the library's C:R:A. Although the rules for changing
these version numbers can quickly become confusing, a few
simple tips should help keep you on track. The libtool
documentation goes into greater depth.
In essence, every time you make a change to the library and
release it, the C:R:A should change. A new library should start
with 0:0:0. Each time you change the public interface
(i.e., your installed header files), you should increment the
CURRENT number. This is called your interface number. The main
use of this interface number is to tag successive revisions
of your API.
The AGE number is how many consecutive versions of the API the
current implementation supports. Thus if the CURRENT library
API is the sixth published version of the interface and it is
also binary compatible with the fourth and fifth versions
(i.e., the last two), the C:R:A might be 6:0:2. When you break
binary compatibility, you need to set AGE to 0 and of course
increment CURRENT.
The REVISION marks a change in the source code of the library
that doesn't affect the interface-for example, a minor bug fix.
Anytime you increment CURRENT, you should set REVISION back to 0.
Change-Id: Id72e74c1642c804fea6f93ec109135c7c16f1810
BUG: 862082
Signed-off-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-on: http://review.gluster.org/5645
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Made the following minor changes:
* Fix broken links and point to correct image paths
* Remove dead links and references
* Fix table format to conform to Github Flavoured Markdown
* Add few common terms to glossary
* Maintain consistency of format in writing headings <h1..h6>
* Remove irrelevant files
* Remove references to contact Red Hat support.
Change-Id: I4aed4945d56b5d68b8ea133ce5fa3162bfc2864f
Signed-off-by: Prashanth Pai <ppai@redhat.com>
Reviewed-on: http://review.gluster.org/6514
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Tested-by: Vijay Bellur <vbellur@redhat.com>
This patch is an attempt to provide some much needed
cleanup for future maintenance of `mount.glusterfs`
- Add checks for command failures
- Spliting large code into subsequent simpler functions
- Standardized variables
- use 'bash' instead of 'sh' - since string manipulation
and variable handling is far superior
- Overall code cleanup and Copyright change to Red, Hat Inc.
- Add new style of mounting with a comma separated list
~~~
$ mount -t glusterfs <IP1/HOSTNAME1>,<IP2/HOSTNAME2>,..<IPN/HOSTNAMEN>:/<VOLUME> <MNT>
~~~
- Update age old `manpage` with new options :-)
Change-Id: I294e4d078a067d67d9a67eb8dde5eb2634cc0e45
BUG: 1040348
Signed-off-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-on: http://review.gluster.org/5931
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amarts@gmail.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
This patch fixes to use /etc/glusterfs/logger.conf file instead of
/var/lib/glusterd/logger.conf for logging target (whether to use
syslog or not) at run time.
Change-Id: Icb1de9ebfb7e529940e2aac970978ad70b34b213
BUG: 928648
Signed-off-by: Bala.FA <barumuga@redhat.com>
Reviewed-on: http://review.gluster.org/5542
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
at syslog side, log message is identified by its properties like
programname, pid, etc. brick/mount processes need to be identified
uniquely as they are different process of gluterfsd/glusterfs. At
rsyslog side, log separated by programname/app-name with pid works but
bit hard to identify them in long run which process is for what
brick/mount.
This patch fixes by setting identity string at openlog() which sets
programname/app-name as similar to old style log file prefixed by
gluster, glusterd, glusterfs or glusterfsd
Change-Id: Ia05068943fa67ae1663aaded1444cf84ea648db8
BUG: 928648
Signed-off-by: Bala.FA <barumuga@redhat.com>
Reviewed-on: http://review.gluster.org/5541
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
pandoc: Error producing PDF from TeX source.
! Package inputenc Error: Unicode char \u8:‟ not set up for use with LaTeX.
See the inputenc package documentation for explanation.
Type H <return> for immediate help.
...
l.6216 ... the objects access rights to "public‟
Change-Id: I23428930d167064b7c5790eea09daedbef06153a
Signed-off-by: Lubomir Rintel <lubo.rintel@gooddata.com>
Reviewed-on: http://review.gluster.org/5477
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Tested-by: Vijay Bellur <vbellur@redhat.com>
It should not be specific to old gluster version anyway and the dot in name
causes trouble to pandoc/LaTeX:
pandoc: Error producing PDF from TeX source.
! LaTeX Error: Unknown graphics extension: .2_Architecture.png.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.98 ...ages/640px-GlusterFS_3.2_Architecture.png}
Change-Id: I9d222a1628e1c14b004c059733fabd7b70c86f26
Signed-off-by: Lubomir Rintel <lubo.rintel@gooddata.com>
Reviewed-on: http://review.gluster.org/5476
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Tested-by: Vijay Bellur <vbellur@redhat.com>
Moved rdma and bd documents to doc/features. Added a new
document on rebalance.
Change-Id: I04269202adc9605754fc29876433c88480b822a3
BUG: 811311
Signed-off-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-on: http://review.gluster.org/5395
Reviewed-by: Anand Avati <avati@redhat.com>
Tested-by: Anand Avati <avati@redhat.com>
When compile time option GF_USE_SYSLOG is enabled (which is default),
generated logs are sent to syslog with error code ERR_DEV.
User can opt to use traditional log at run time by creating
/var/log/glusterd/logger.conf file and restarting respective gluster
services.
Change-Id: I9837d0f99da1afc2189d7ecd214c4293ec53715a
BUG: 928648
Signed-off-by: Bala.FA <barumuga@redhat.com>
Reviewed-on: http://review.gluster.org/5002
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Problem: NFS allows exporting subdirectories but there is not support for
providing AUTH on per directory basis.
Fix: Modified nfs.export-dir to include AUTH parameters
e.g. nfs.export-dir "/dir1(10.1.1.2),/dir2(10.1.1.0/24|host1)
During mount operation NFS will check if the IP from where the connection is made
is configured in the AUTH parameter, else the mount operation will fail with
EACCES error.
Updated admin-guide and volume set help message.
Change-Id: I5c6d22edb168b4f46376d1cd6878cd065fc081cc
BUG: 968227
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-on: http://review.gluster.org/5124
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Goal of this health-checker is to detect fatal issues of the underlying
storage that is used for exporting a brick. The current implementation
requires the filesystem to detect the storage error, after which it will
notify the parent xlators and exit the glusterfsd (brick) process to
prevent further troubles.
The interval the health-check runs can be configured per volume with the
storage.health-check-interval option. The default interval is 30
seconds.
It is not trivial to write an automated test-case with the current
prove-framework. These are the manual steps that can be done to verify
the functionality:
- setup a Logical Volume (/dev/bz970960/xfs) and format is as XFS for
brick usage
- create a volume with the one brick
# gluster volume create failing_xfs glufs1:/bricks/failing_xfs/data
# gluster volume start failing_xfs
- mount the volume and verify the functionality
- make the storage fail (use device-mapper, or pull disks)
# dmsetup table
..
bz970960-xfs: 0 196608 linear 7:0 2048
# echo 0 196608 error > dmsetup-error-target
# dmsetup load bz970960-xfs dmsetup-error-target
# dmsetup resume bz970960-xfs
# dmsetup table
...
bz970960-xfs: 0 196608 error
- notice the errors caught by syslog:
Jun 24 11:31:49 vm130-32 kernel: XFS (dm-2): metadata I/O error: block 0x0 ("xfs_buf_iodone_callbacks") error 5 buf count 512
Jun 24 11:31:49 vm130-32 kernel: XFS (dm-2): I/O Error Detected. Shutting down filesystem
Jun 24 11:31:49 vm130-32 kernel: XFS (dm-2): Please umount the filesystem and rectify the problem(s)
Jun 24 11:31:49 vm130-32 kernel: VFS:Filesystem freeze failed
Jun 24 11:31:50 vm130-32 GlusterFS[1969]: [2013-06-24 10:31:50.500674] M [posix-helpers.c:1114:posix_health_check_thread_proc] 0-failing_xfs-posix: health-check failed, going down
Jun 24 11:32:09 vm130-32 kernel: XFS (dm-2): xfs_log_force: error 5 returned.
Jun 24 11:32:20 vm130-32 GlusterFS[1969]: [2013-06-24 10:32:20.508690] M [posix-helpers.c:1119:posix_health_check_thread_proc] 0-failing_xfs-posix: still alive! -> SIGTERM
- these errors are in the log of the brick as well:
[2013-06-24 10:31:50.500607] W [posix-helpers.c:1102:posix_health_check_thread_proc] 0-failing_xfs-posix: stat() on /bricks/failing_xfs/data returned: Input/output error
[2013-06-24 10:31:50.500674] M [posix-helpers.c:1114:posix_health_check_thread_proc] 0-failing_xfs-posix: health-check failed, going down
[2013-06-24 10:32:20.508690] M [posix-helpers.c:1119:posix_health_check_thread_proc] 0-failing_xfs-posix: still alive! -> SIGTERM
- the glusterfsd process has exited correctly:
# gluster volume status
Status of volume: failing_xfs
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick glufs1:/bricks/failing_xfs/data N/A N N/A
NFS Server on localhost 2049 Y 1897
Change-Id: Ic247fbefb97f7e861307a5998a9a7a3ecc80aa07
BUG: 971774
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/5176
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Editing markdown is probably more easier than xml.
pandoc can then be used for conversion to html, pdf and any other necessary
formats. Note that pandoc has the following input and output formats:
Input: markdown and (subsets of) Textile, reStructuredText, HTML, LaTeX, and
DocBook XML.
Output:plain text, markdown, reStructuredText, XHTML, HTML 5, LaTeX
(including beamer slide shows), ConTeXt, RTF, DocBook XML, OpenDocument XML,
ODT, Word docx, GNU Texinfo, MediaWiki markup, EPUB, Textile, groff man pages,
Emacs Org-Mode, AsciiDoc, and Slidy, Slideous, DZSlides, or S5 HTML slide shows.
It can also pro‐ duce PDF output on systems where LaTeX is installed.
All documentation changes can be submitted as changes to markdown and we can
attempt a periodic documentation refresh on gluster.org.
Change-Id: I5dcf7f79184cd6b6d62ce7065d2faa352622f6ac
Reviewed-on: http://review.gluster.org/5232
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
Tested-by: Anand Avati <avati@redhat.com>
Till now gluster used tcp/ip based communication channel with
gluster specific protocol to exchange infiniband addresses.
Change-Id: I9de4db398a0e2af51d3d2d68c2fe42168102b190
BUG: 765051
Signed-off-by: Raghavendra G <raghavendra@gluster.com>
Reviewed-on: http://review.gluster.org/149
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Updated man page,
* Added some of the options which were not there before.
* Updated the default dirs.
Change-Id: Ia796377120dc2fb990b2591c7607a16ef93f1fe2
BUG: 825906
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/4060
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
The license message is changed to
Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com>
This file is part of GlusterFS.
This file is licensed to you under your choice of the GNU Lesser
General Public License, version 3 or any later version (LGPLv3 or
later), or the GNU General Public License, version 2 (GPLv2), in all
cases as published by the Free Software Foundation.
Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3858
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
See comments in http://bugzilla.redhat.com/839925 for
the code to perform this change.
Signed-off-by: Jim Meyering <meyering@redhat.com>
BUG: 839925
Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a
Reviewed-on: http://review.gluster.com/3661
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
as it is changed in RPM based install (using spec file), makes sense to do
it everywhere, even in source install
Change-Id: Ibe5ebd860b1529aca295b79d683a3b2e6797506c
Signed-off-by: Amar Tumballi <amar@gluster.com>
BUG: 824231
Reviewed-on: http://review.gluster.com/3338
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vijay@gluster.com>
