IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Assgining -1 to ret if fd_create fails. The tests somehow
enter an error case 'if' block (this will be a separate bug fix),
before glfd is created. Need an addiitional check to see
if glfd exists before entering the 'else' block in 'out'.
glfs_h_creat was missing a similar check, adding that in
this bug fix.)
Change-Id: I3b69540c53e8169538848b9e7f23ffc8ef0ac189
BUG: 1121062
Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com>
Reviewed-on: http://review.gluster.org/8333
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: soumya k <skoduri@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Earlier, xysnc's register was being called first,
which was creating working directory before calling
changelog_register. Now it is history crawl first.
Hence working directory would not have been created.
Create it in gf_changelog_register itself if it is
not already created.
Change-Id: Ief3f2b87deaf5da16c135b64be1be42e0a7647f3
BUG: 1125843
Signed-off-by: Kotresh H R <khiremat@redhat.com>
Reviewed-on: http://review.gluster.org/8399
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Aravinda VK <avishwan@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Fix the issue that posix_fsync does not correctly return and save
error code in op_errno when call to sys_fdatasync fails.
Change-Id: Id0b62cfa009dbb52c8a0992abd5c46330fa0a8c0
BUG: 1125814
Signed-off-by: Zhang Huan <zhhuan@gmail.com>
Reviewed-on: http://review.gluster.org/8398
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Reviewed-by: Santosh Pradhan <spradhan@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Currently whenever dht_lookup_everywhere gets called, if in
dht_lookup_everywhere_cbk, a linkto file is found on non-hashed
subvolume, file is unlinked. But there are cases when this file
is under migration. Under such condition, we should avoid deletion
of file.
When some other rebalance process changes the layout of parent
such that dst_file (w.r.t. migration) falls on non-hashed node,
then may be lookup could have found it as linkto file but just
before unlink, file is under migration or already migrated
In such cased unlink can be avoided.
Race:
-------
If we have two bricks (brick-1 and brick-2) with initial file "a"
under BaseDir which is hashed as well as cached on (brick-1).
Assume "a" hashing gives 44.
Brick-1 Brick-2
Initial Setup: BaseDir/a BaseDir
[1-50] [51-100]
Now add new-brick Brick-3.
1. Rebalance-1 on node Node-1 (Brick-1 node) will reset
the BaseDir Layout.
2. After that it will perform
a) Create linkto file on new-hashed (brick-2)
b) Perform file migration.
1.Rebalance-1 Fixes the base-layout:
Brick-1 Brick-2 Brick-3
--------- ---------- ------------
BaseDir/a BaseDir BaseDir
[1-33] [34-66] [67-100]
2. Only a) is BaseDir/a BaseDir/a(linkto) BaseDir
performed Create linktofile
Now rebalance 2 on node-2 jumped in and it will perform
step 1 and 2-a.
After (rebal-2, step-1), it changes the layout of the BaseDir.
BaseDir/a BaseDir/a(link) BaseDir
[67-100] [1-33] [34-66]
For (rebale-2, step-2), It will perform lookup at Brick-3 as w.r.t new
layout 44 falls for brick-3. But lookup will fail.
So dht_lookup_everywhere gets called.
NOTE: On brick-2 by rebalance-1, a linkto file was created.
Currently that linkto files gets deleted by rebalance-2 lookup as it
is considered as stale linkto file. But with patch if rebalance is
already in progress or rebalance is over, linkto file will not be
unlinked. If rebalance is in progress fd will be open and if rebalance
is over then linkto file wont be set.
Change-Id: I3fee0d28de3c76197325536a9e30099d2413f079
BUG: 1116150
Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com>
Reviewed-on: http://review.gluster.org/8345
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
This solves a compilation error on some compiler versions.
To avoid compilation issues on non-Intel architectures, patch
http://review.gluster.org/8366/ has already been merged. It
disables ec on those architectures.
These modifications are temporary patches until a proper
solution for bug #1125166 is ready.
Change-Id: I74d0b79e84601cc4f86ad08ce0f8102b99a79a68
BUG: 1125168
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/8395
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
- Check for pidof(8) presence. It may not be present on non Linux systems
- Add a -f flag to run-tests.sh to bypass utility presence checks
Submit again because of spurious regression test failure
BUG: 764655
Change-Id: Iee6282c686c63a01808543054f8e5a3b5b79fca2
Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org>
Reviewed-on: http://review.gluster.org/8279
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Harshavardhana <harsha@harshavardhana.net>
When building the current master branch on EPEL-5, the following error
is observed:
CC dht_layout_unittest-dht_layout_mock.o
unittest/dht_layout_mock.c:77:2: error: no newline at end of file
make[5]: *** [dht_layout_unittest-dht_layout_mock.o] Error 1
make[5]: *** Waiting for unfinished jobs....
EPEL-5 has this gcc:
$ gcc --version
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-54)
The fix is simple enough, dht_layout_unittest-dht_layout_mock.c should
have a line ending.
BUG: 1124858
Change-Id: I8ca7a1699fd1c35694073b9577f94ae525854713
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/8392
Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Luis Pabon <lpabon@redhat.com>
* A wrong memory allocator was used to (de)allocate nodes (not data in
them) of rb tree. This patch uses default allocator, since that suits
our purpose.
* Fix reference counting of client, though hitting the codepath
containing this bug is highly unlikely.
Change-Id: I7692097351d6e54288fee01da5af18e761fd0e8c
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
BUG: 1067256
Reviewed-on: http://review.gluster.org/7816
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Santosh Pradhan <spradhan@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
should be aligned with error messages of info and list
When a snapshot operation like status, info, list
performed on a non-existing snapshot.
For Status error message is displayed as 'Snap not found'
For List and Info error message is displayed as 'Snapshot does not exist'
Have the consistant error message all the places
Change-Id: I7b241217dba62fda844481731a6858e4ecb12897
BUG: 1119641
Signed-off-by: Vijaikumar M <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/8309
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
problem: Snapshot command fails if one or more bricks are not thinly
provisioned. But the error message is a generic error message which
is confusing to the user.
fix: Provide correct error message in case of failure.
Change-Id: Iad247f966423a8f73ef6da57cab7ed6cddc05861
BUG: 1123646
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-on: http://review.gluster.org/8377
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
Additional check to check if we created the linkto
file before deleting it in the rename cleanup function
Change-Id: I919cd7cb24f948ba4917eb9cf50d5169bb730a67
BUG: 1117851
Signed-off-by: Nithya Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/8338
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
The code is not atomic enough to not to delete a dentry created by a
prallel dentry creation operation.
Change-Id: I9bd6d2aa9e7a1c0688c0a937b02a4b4f56d7aa3d
BUG: 1117851
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-on: http://review.gluster.org/8327
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
fd->flags before syncop_open()
glfs_create() and glfs_open() do not set fd->flags before calling syncop_open().
This patch addresses this problem and ensure the flags are set in fd before
invoking syncop_open()
Change-Id: I9ef3243b1de610e1dd1a3e37b66fc2f763a865f9
BUG: 1096047
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/7999
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
Reviewed-by: Anand Avati <avati@redhat.com>
ps aux is truncated to the terminal width on NetBSD, Use ps auxww to
avoid that
BUG: 764655
Change-Id: I28a2fc23e2823dd6524a72da30111b86fc4bfa7b
Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org>
Reviewed-on: http://review.gluster.org/8281
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Harshavardhana <harsha@harshavardhana.net>
The --fqdn option to hostname is Linux only
This is resubmission of the same patch. I assume the regression test
is a test bug
BUG: 764655
Change-Id: I6437124186435f10d1ee6a847e2593554d633716
Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org>
Reviewed-on: http://review.gluster.org/8282
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Harshavardhana <harsha@harshavardhana.net>
This is to guard against a double STACK_DESTROY in the event that
rpc_clnt_submit() failed and returned -1 anytime after sending the
request over the wire. in which case the stack could be destroyed
twice: once in the callback function of the request and once in
the error codepath of some of the callers of glusterd_submit_request().
This bug was introduced in http://review.gluster.org/#/c/8257/
Change-Id: I18a345db6eafc62ba312743201ced7d3f8697622
BUG: 1116243
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: http://review.gluster.org/8301
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
The current code assumes cmockery2 is installed in default paths.
Use PKG_MODULES_CHECK to find it using pkg-config if it is not. If
not found by pkg-config, try AC_CHECK_LIB.
There are also some build flag adjustement so that local overrides
do not loose the required -I flags.
This includes and enhance http://review.gluster.org/8340/
BUG: 764655
Change-Id: Ide9f77d1e70afe3c1c5c57ae2b93127af6a425f9
Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org>
Reviewed-on: http://review.gluster.org/8365
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
to a system as-well-as to a particular volume.
Problem :
With the current design we can only delete a single snapshot.
And the deletion of volume which contains snapshot is not allowed.
Because of that user might be forced to delete all the snapshots
manually before he is allowed to delete a volume.
Solution:
Following is the interface with which user can delete
all the snapshots of a system or belonging to a particular volume.
Syntax : gluster snapshot delete all
*To delete all the snapshots present in a system
Syntax : gluster snapshot delete volume <volname>
*To deletes all the snapshot present in a volume specified.
========================================================================
Sample Output:
Case 1 : Deleting a single snapshot.
[root@snapshot-24 glusterfs]# gluster snapshot delete snap1
Deleting snap will erase all the information about the snap. Do you still want to continue? (y/n) y
snapshot delete: snap1: snap removed successfully
-----------------------------------------------------------------
Case 2 : Deleting all the snapshots in a Volume.
[root@snapshot-24 glusterfs]# gluster snapshot delete volume vol1
Volume (vol1) contains 9 snapshot(s).
Do you still want to continue and delete them? (y/n) y
snapshot delete: snap2: snap removed successfully
snapshot delete: snap3: snap removed successfully
snapshot delete: snap4: snap removed successfully
snapshot delete: snap5: snap removed successfully
.
.
.
-----------------------------------------------------------------
Case 3 : Deleting all the snapshots in a system.
[root@snapshot-24 glusterfs]# gluster snapshot delete all
System contains 4 snapshot(s).
Do you still want to continue and delete them? (y/n) y
snapshot delete: snap7: snap removed successfully
snapshot delete: snap8: snap removed successfully
snapshot delete: snap9: snap removed successfully
snapshot delete: snap10: snap removed successfully
========================================================================
Change-Id: Ifec8e128ab2011cbbba208376b9c92cfbe7d8d71
BUG: 1112613
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Reviewed-on: http://review.gluster.org/8162
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
Problem:
In glusterd_op_remove_brick(), volinfo->subvol_count was getting updated only if
the replica count was reduced due to which subvol_matcher_verify() gave false
errors under certain scenarios (see bug description).
Fix:
updated subvol_count for every remove-brick operation.
Change-Id: Id72691e2bda1c624cd7d8cae92f6bf32c101a6d3
BUG: 1120647
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/8326
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
for snapshot operation performed on a cluster with
op-version less than 30600
Currently we get error message as on cli 'Another transaction is in progress
Please try again after sometime' when a snapshot operation is performed
on a cluster with op-version less than 30600.
We need to print the correct error message in this case.
Change-Id: I5f144428d928393c3796bde96ce6e3a40fca8141
BUG: 1122816
Signed-off-by: Vijaikumar M <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/8371
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-by: Sachin Pandit <spandit@redhat.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
and auto-delete value in gluster volume info.
Problem : Even though snap-max-hard-limit, snap-max-soft-limit and
auto-delete values were not set explicitly, It was getting showed
in the output of gluster volume info.
Solution : Check if the value is already present in dictionary
(That means, it is set), If value is not present then consider
the default value,
NOTE : This patch doesn't solve the problem where the values
which is set globally are being displayed in gluster volume info
Change-Id: I61445b3d2a12eb68c38a19bea53b9051ad028050
BUG: 1113476
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Reviewed-on: http://review.gluster.org/8191
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
For effective handling of deletes and renames use history crawl
as much as possible. History crawl will run in loop till it syncs
all data before live changelog time.
When it uses xsync crawl(fallback when changelog not available, or
very first crawl) it sets upper limit to crawl.
After completing History crawl, it checks actual end time returned
by history api to compare with register time, if actual end is less
than register time then run history crawl one more time.
If first turn history processing time is less than the CHANGELOG
ROLLOVER TIME then sleep for the difference, After sleep if it is
guaranteed that rollover will happen and switches to live changelog
consumption without switching to xsync. This sleep is only when
history processing completed < CHANGELOG_ROLLOVER_TIME and sleep
only after the first turn, So will not affect the performance.
BUG: 1112238
Change-Id: I644ef24b07e42e81cec96a025ebd21244a555ec0
Signed-off-by: Aravinda VK <avishwan@redhat.com>
Reviewed-on: http://review.gluster.org/8151
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Tested-by: Venky Shankar <vshankar@redhat.com>
This patch fixes changelog capturing internal FOPs in a cascaded
setup, where the intermediate master would record internal FOPs
(generated by DHT on link()/rename()). This is due to I/O happening
on the intermediate slave on geo-replication's auxillary mount with
client-pid -1. Currently, the internal FOP capturing logic depends
on client pid being non-negative and the presence of a special key
in dictionary. Due to this, internal FOPs on an inter-mediate master
would be recorded in the changelog. Checking client-pid being
non-negative was introduced to capture AFR self-heal traffic in
changelog, thereby breaking cascading setups. By coincidence,
AFR self-heal daemon uses -1 as frame->root->pid thereby making
is hard to differentiate b/w geo-rep's auxillary mount and self-heal
daemon.
Change-Id: Ib7bd71e80dd1856770391edb621ba9819cab7056
BUG: 1122037
Original-Author: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Kotresh H R <khiremat@redhat.com>
Reviewed-on: http://review.gluster.org/8347
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
disperse module fails to compile since
ENODATA is non-existent on FreeBSD/Darwin
Use errno conversion in compat-errno.h to avoid
build issues.
Change-Id: I8203b7195c198c77202bde9bbec1813a487f923a
BUG: 1111774
Signed-off-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-on: http://review.gluster.org/8320
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
Problem:
The xattr healing part of the marker requires path to be present in the loc.
Currently path is not filled while triggering from the readdirp_cbk.
Solution:
Current patch tries to fill the loc with path.
Change-Id: I5c7dc9de60fa79ca0fe9b58d2636fd1355add0d3
BUG: 1118591
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/8296
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Raghavendra G <rgowdapp@redhat.com>
Added a script check_goto.pl, that when run from
the source code root, will scan all .c files to match
the following pattern:
label:
if (condition)
goto label;
On finding such a pattern the script will print the file name
and the line number. There are certain cases where the above
recursive pattern is intended. Hence adding those labels to
ignore-labels. Thanks Vijaikumar Mallikarjuna for the perl
script.
Also fixed all such existing errors
Change-Id: I1b821d0a8c296f16e40faff20bd029bdc880c2e9
BUG: 1119256
Signed-off-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Signed-off-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-on: http://review.gluster.org/8307
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
For a number of linker flags the order of the object files and the libs
to link against matter (for example -Wl,--as-needed). Make sure that
libraries are added via the LIBADD variable instead of LDFLAGS and
therefore always come after the object files.
Change-Id: I59d114752a0c7664b8678a72082ba5e445497fe5
Signed-off-by: Tiziano Müller <tiziano.mueller@stepping-stone.ch>
Reviewed-on: http://review.gluster.org/8331
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
op_ret incremented to compensate for NULL terminating character
leads to self referential loop where OSXFUSE which would reply
on a same READLINK() over and over again
~~~
[2014-07-12 08:41:29.815473]
T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse:
1: /a/b/1 => ../../1
[2014-07-12 08:41:29.815820]
T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse:
0: /a/b/1 => ../../1
[2014-07-12 08:41:29.816165]
T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse:
1: /a/b/1 => ../../1
~~~
It happens due to the problem being (op_ret + 1) > strlen(linkname),
for some odd reason this isn't an issue on Linux where there are odd
safegaurds on these things - Example of following code
~~~
((char *)linkname)[op_ret] = '\0';
send_fuse_data (this, finh, (void *)linkname, op_ret + 2048); <---- Here!
~~~
This behaves normally with no issue, the reasoning i have is that
internally 'readlink()' is verified with strlen() again or perhaps the size
is re-adjusted to the strlen() of `linkname`
This isn't the case on OSX, one needs to make sure that
~~~
strlen(linkname) == op_ret
~~~
Otherwise you would get READLINK() loops as shown above.
This patch fixes the problem.
Many thanks to Anand Avati for helping me out on this.
Change-Id: Ia35818de78a5e4d89bad03ab06e2c5ed6e6753a4
BUG: 1095525
Signed-off-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-on: http://review.gluster.org/8300
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
This patch will allow for developers to create unit tests for
their code. Documentation has been added to the patch and
is available here:
doc/hacker-guide/en-US/markdown/unittest.md
Also, unit tests are run when RPM is created.
This patch is a replacement for http://review.gluster.org/#/c/7281
which removed unit test infrastucture from the repo due to multiple
conflicts. Cmockery2 is now available in Fedora and EPEL, and soon
to be available in Debian and Ubuntu. For all other operating
systems, please install from the source:
https://github.com/lpabon/cmockery2
BUG: 1067059
Change-Id: I1b36cb1f56fd10916f9bf535e8ad080a3358289f
Signed-off-by: Luis Pabón <lpabon@redhat.com>
Reviewed-on: http://review.gluster.org/7538
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
