IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's a bit frustrating to run a test normally (e.g. during development),
see a failure, and then have to re-run it with DEBUG=1 to see what
actually failed. This tiny patch prints out the command line of the
test that just failed, even if DEBUG=0 (in fact only if DEBUG=0 since
otherwise it would be redundant).
Change-Id: Icffa096d0bcc6f35176f0e47d9d1bc538698ca2c
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/7537
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
RFE: Support wildcard in "nfs.rpc-auth-allow" and
"nfs.rpc-auth-reject". e.g.
*.redhat.com
192.168.1[1-5].*
192.168.1[1-5].*, *.redhat.com, 192.168.21.9
Along with wildcard, support for subnetwork or IP range e.g.
192.168.10.23/24
The option will be validated for following categories:
1) Anonymous i.e. "*"
2) Wildcard pattern i.e. string containing any ('*', '?', '[')
3) IPv4 address
4) IPv6 address
5) FQDN
6) subnetwork or IPv4 range
Currently this does not support IPv6 subnetwork.
Change-Id: Iac8caf5e490c8174d61111dad47fd547d4f67bf4
BUG: 1086097
Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com>
Reviewed-on: http://review.gluster.org/7485
Reviewed-by: Poornima G <pgurusid@redhat.com>
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
The GlusterFS protocol currently uses AUTH_GLUSTERFS_V2 in the RPC/AUTH
header. This header contains the uid, gid and auxiliary groups of the
user/process that accesses the Gluster Volume.
The AUTH_GLUSTERFS_V2 structure allows up to 65535 auxiliary groups to
be passed on. Unfortunately, the RPC/AUTH header is limited to 400 bytes
by the RPC specification: http://tools.ietf.org/html/rfc5531#section-8.2
In order to not cause complete failures on the client-side when trying
to encode a AUTH_GLUSTERFS_V2 that would result in more than 400 bytes,
we can calculate the expected size of the other elements:
1 | pid
1 | uid
1 | gid
1 | groups_len
XX | groups_val (GF_MAX_AUX_GROUPS=65535)
1 | lk_owner_len
YY | lk_owner_val (GF_MAX_LOCK_OWNER_LEN=1024)
----+-------------------------------------------
5 | total xdr-units
one XDR-unit is defined as BYTES_PER_XDR_UNIT = 4 bytes
MAX_AUTH_BYTES = 400 is the maximum, this is 100 xdr-units.
XX + YY can be 95 to fill the 100 xdr-units.
Note that the on-wire protocol has tighter requirements than the
internal structures. It is possible for xlators to use more groups and
a bigger lk_owner than that can be sent by a GlusterFS-client.
This change prevents overflows when allocating the RPC/AUTH header. Two
new macros are introduced to calculate the number of groups that fit in
the RPC/AUTH header, when taking the size of the lk_owner in account. In
case the list of groups exceeds the maximum possible, only the first
groups are passed over the RPC/GlusterFS protocol to the bricks.
A warning is added to the logs, so that most system administrators will
get informed.
The reducing of the number of groups is not a new inventions. The
RPC/AUTH header (AUTH_SYS or AUTH_UNIX) that NFS uses has a limit of 16
groups. Most, if not all, NFS-clients will reduce any bigger number of
groups to 16. (nfs.server-aux-gids can be used to workaround the limit
of 16 groups, but the Gluster NFS-server will be limited to a maximum of
93 groups, or fewer in case the lk_owner structure contains more items.)
Change-Id: I8410e59d0fd246d601b54b961d3ae9cb5a858c10
BUG: 1053579
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/7202
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
Reviewed-by: Santosh Pradhan <spradhan@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Basic functional tests related to self-heal.
arequal-checksum.c is taken from
https://github.com/raghavendrabhat/arequal after consent from all
authors.
Change-Id: I43facc31c61375f4dbe58bbb46238e15df5c9011
BUG: 1080759
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/7357
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Problem : When gluster volume remove-brick is executed with out any option, it
defaults to force commit which results in data loss.
Fix : remove-brick can not be executed with out explicit option, user needs to
provide the option in the command line else the command will throw back an usage
error.
Earlier usage : volume remove-brick <VOLNAME> [replica <COUNT>] <BRICK> ...
[start|stop|status|commit|force]
Current usage : volume remove-brick <VOLNAME> [replica <COUNT>] <BRICK> ...
<start|stop|status|commit|force>
Change-Id: I2a49131f782a6c0dcd03b4dc8ebe5907999b0b49
BUG: 1077682
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/7292
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Shyamsundar Ranganathan <sam.somari@gmail.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Probelm : __is_file_migratable used to return ENOTSUP
for all the cases. Hence, it will add to the failure
count. And the remove-brick status will show failure
for all the files.
Solution : Added 'ret = -2' to gf_defrag_handle_hardlink to
be deemed as success. Otherwise dht_migrate_file will try to
migrate each of the hard link, which not intended.
Change-Id: Iff74f6634fb64e4b91fc5d016e87ff1290b7a0d6
BUG: 1066798
Signed-off-by: Susant Palai <spalai@redhat.com>
Reviewed-on: http://review.gluster.org/7124
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Currently there are quite a slew of logs in Gluster that do not
lend themselves to trivial analysis by various tools that help
collect and monitor logs, due to the textual nature of the logs.
This FEAT is to make this better by giving logs message IDs so
that the tools do not have to do complex log parsing to break
it down to problem areas and suggest troubleshooting options.
With this patch, a new set of logging APIs are introduced that
take additionally a message ID and an error number, so as to
print the message ID and the descriptive string for the error.
New APIs:
- gf_msg, gf_msg_debug/trace, gf_msg_nomem, gf_msg_callingfn
These APIs follow the functionality of the previous gf_log*
counterparts, and hence are 1:1 replacements, with the delta
that, gf_msg, gf_msg_callingfn take additional parameters as
specified above.
Defining the log messages:
Each invocation of gf_msg/gf_msg_callingfn, should provide an ID
and an errnum (if available). Towards this, a common message id
file is provided, which contains defines to various messages and
their respective strings. As other messages are changed to the
new infrastructure APIs, it is intended that this file is edited
to add these messages as well.
Framework enhanced:
The logging framework is also enhanced to be able to support
different logging backends in the future. Hence new configuration
options for logging framework and logging formats are introduced.
Backward compatibility:
Currently the framework supports logging in the traditional
format, with the inclusion of an error string based on the errnum
passed in. Hence the shift to these new APIs would retain the log
file names, locations, and format with the exception of an
additional error string where applicable.
Testing done:
Tested the new APIs with different messages in normal code paths
Tested with configurations set to gluster logs (syslog pending)
Tested nomem variants, inducing the message in normal code paths
Tested ident generation for normal code paths (other paths
pending)
Tested with sample gfapi program for gfapi messages
Test code is stripped from the commit
Pending work (not to be addressed in this patch (future)):
- Logging framework should be configurable
- Logging format should be configurable
- Once all messages move to the new APIs deprecate/delete older
APIs to prevent misuse/abuse using the same
- Repeated log messages should be suppressed (as a configurable
option)
- Logging framework assumes that only one init is possible, but
there is no protection around the same (in existing code)
- gf_log_fini is not invoked anywhere and does very little
cleanup (in existing code)
- DOxygen comments to message id headers for each message
Change-Id: Ia043fda99a1c6cf7817517ef9e279bfcf35dcc24
BUG: 1075611
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Reviewed-on: http://review.gluster.org/6547
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Problem : For remove-brick start operation all client volfiles are reconfigured
except nfs server volfile. Hence, even after layout is fixed by the rebalance
process, the nfs clients dont see the change and go on creating directories and
files in the decommissioned brick which leads to data loss after remove-brick
commit.
Solution : Reconfigure the nfs server volfile for remove-brick start
credit: kaushal@redhat.comspalai@redhat.com
Change-Id: Ib8cd8b45a9e1f888d5e00dff65cdf77c1613a2af
BUG: 1070734
Signed-off-by: Susant Palai <spalai@redhat.com>
Reviewed-on: http://review.gluster.org/7162
Reviewed-by: Kaushal M <kaushal@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
- Remove client side self-healing completely (opendir, openfd, lookup)
- Re-work readdir-failover to work reliably in case of NFS
- Remove unused/dead lock recovery code
- Consistently use xdata in both calls and callbacks in all FOPs
- Per-inode event generation, used to force inode ctx refresh
- Implement dirty flag support (in place of pending counts)
- Eliminate inode ctx structure, use read subvol bits + event_generation
- Implement inode ctx refreshing based on event generation
- Provide backward compatibility in transactions
- remove unused variables and functions
- make code more consistent in style and pattern
- regularize and clean up inode-write transaction code
- regularize and clean up dir-write transaction code
- regularize and clean up common FOPs
- reorganize transaction framework code
- skip setting xattrs in pending dict if nothing is pending
- re-write self-healing code using syncops
- re-write simpler self-heal-daemon
Change-Id: I1e4080c9796c8a2815c2dab4be3073f389d614a8
BUG: 1021686
Signed-off-by: Anand Avati <avati@redhat.com>
Reviewed-on: http://review.gluster.org/6010
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
A program that calls mmap() on a newly created sparse file, may receive
a SIGBUS signal. If SIGBUS is not handled, a segmentation fault will
occur and the program will exit.
A bug in the write-behind translator can cause the creation of a sparse
file created with open(), seek(), write() to be cached. The last write()
may not be sent to the server, until write-behind deems this necessary.
* open(.., O_TRUNC, ...)/creat() the file, it is 0 bytes big
* seek() into the file, use offset 31
* write() 1 byte to the file
* the range from byte 0-30 are unwritten so called 'sparse'
The following illustration tries to capture this:
Legend:
[ = start of file
_ = unallocated/unwritten bytes
# = allocated bytes in the file
] = end of file
[_______________#]
| |
'- byte 0 '- byte 31
Without this change, reading from byte 0-30 will return an error, and
reading the same area through an mmap()'d pointer will trigger a SIGBUS.
Reading from this range did not trigger the outstanding write() to be
flushed. The brick that receives the read() (translated over the network
from mmap()) does not know that the file has been extended, and returns
-EINVAL. This error gets transported back from the brick to the
glusterfs-fuse client, and translated by the Linux kernel/VFS into
SIGBUS triggered by mmap().
In order to solve this, a new attribute to the wb_inode structure is
introduced; the current size of the file. All FOPs that can modify the
size, are expected to update wb_inode->size. This makes it possible for
extending writes with an offset bigger than EOF to mark the unwritten
area as modified/pending.
Change-Id: If5ba6646732e6be26568541ea9b12852a5d0b988
BUG: 1058663
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/6835
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
* Validate network.compression option
* Enable descriptions of xlator configurable options
* Improve indentation in code
* Make network.compression.mode not configurable by user.
This is similar to "iam-self-heal-daemon" option in AFR xlator.
Fixes BUGs: 1065658, 1065640, 1065655
Change-Id: I99d82b574ee0e5c8c2baf5f5d52dbf8d015d330a
BUG: 1065640
Signed-off-by: Prashanth Pai <ppai@redhat.com>
Reviewed-on: http://review.gluster.org/7024
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Problem:
When a replica brick is added to a volume, set-user-ID and set-group-ID
permission bits of files are not set correctly in the new brick. The issue
is in the posix_setattr() call where we do a chmod followed by a chown.
But according to the man pages for chown:
When the owner or group of an executable file are changed by an unprivileged
user the S_ISUID and S_ISGID mode bits are cleared. POSIX does not specify
whether this also should happen when root does the chown().
Fix:
Swap the chmod and chown calls in posix_setattr()
Change-Id: I094e47a995c210d2fdbc23ae7a5718286e7a9cf8
BUG: 1058797
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/6862
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
* As of now clients mounting within the storage pool using that machine's
ip/hostname are trusted clients (i.e clients local to the glusterd).
* Be careful when the request itself comes in as nfsnobody (ex: posix tests).
So move the squashing part to protocol/server when it creates a new frame
for the request, instead of auth part of rpc layer.
* For nfs servers do root-squashing without checking if it is trusted client,
as all the nfs servers would be running within the storage pool, hence will
be trusted clients for the bricks.
* Provide one more option for mounting which actually says root-squash
should/should not happen. This value is given priority only for the trusted
clients. For non trusted clients, the volume option takes the priority. But
for trusted clients if root-squash should not happen, then they have to be
mounted with root-squash=no option. (This is done because by default
blocking root-squashing for the trusted clients will cause problems for smb
and UFO clients for which the requests have to be squashed if the option is
enabled).
* For geo-replication and defrag clients do not do root-squashing.
* Introduce a new option in open-behind for doing read after successful open.
Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0
BUG: 954057
Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
Reviewed-on: http://review.gluster.org/4863
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
With this patch we are replacing the existing cluster-wide
lock taken on glusterds across the cluster, with volume locks
which are also taken on glusterds across the cluster, but are
volume specific. So with the volume locks we are able to perform
more than one gluster operation at the same time, as long as the
operations are being performed on different volumes.
We maintain a global list of volume-locks (using a dict for a list)
where the key is the volume name, and which saves the uuid of the
originator glusterd. These locks are held and released per volume
transaction.
In order to acheive multiple gluster operations occuring at the
same time, we also separate opinfos in the op-state-machine, as a
part of this patch. To do so, we generate a unique transaction-id
(uuid) per gluster transaction. An opinfo is then associated with
this transaction id, which is used throughout the transaction. We
maintain a run-time global list(using a dict) of transaction-ids,
and their respective opinfos to achieve this.
Upstream Feature Page: http://www.gluster.org/community/documentation/index.php/Features/glusterd-volume-locks
Change-Id: Iaad505a854bac8de8f83beec0357eb6cde3f7ea8
BUG: 1011470
Signed-off-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-on: http://review.gluster.org/5994
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Changes are made to quota list command such that it also
shows whether hard-limit and soft-limit are exceeded or not.
A test case to check the same is added.
Change-Id: Idb365acfc5d1f2d9f3373dd5f98573d5fe87b50f
BUG: 1038598
Signed-off-by: Anuradha <atalur@redhat.com>
Signed-off-by: Anuradha Talur <atalur@redhat.com>
Reviewed-on: http://review.gluster.org/6441
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
In some cases it is observed that fix-layout takes more
than 20 seconds to complete, causing test to fail.
Increasing it to a safe value of 30.
Change-Id: I4ac8769e3a1594240ecda96700944ab3702daacc
BUG: 1004744
Signed-off-by: Raghavendra Talur <rtalur@redhat.com>
Reviewed-on: http://review.gluster.org/6855
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
mount-options.t introduces a race leading to failures in
regression tests. Hence disabling the test unit till we
sort out the race.
Also removing the workaround introduced in mount.t.
Change-Id: I7d60413bbff8597f90153cca838e326247e96cd9
BUG: 1060654
Signed-off-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-on: http://review.gluster.org/6911
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Currently with rmdir, if a directory contains only the linkfiles
we remove all the linkfiles and this is causing the problem when the cached
sub volume is down and end-up with duplicate files showing on the mount point.
Solution: Before removing a linkfile check if the
files exists in cached subvolume.
Change-Id: Iedffd0d9298ec8bb95d5ce27c341c9ade81f0d3c
BUG: 1042725
Signed-off-by: Vijaykumar M <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/6500
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
without this patch there is a window of time when quota is marked as
enabled in quota-enforcer, but connection to quotad wouldn't have been
established. Any checklimit done during this period can result in a
failed fop because of unavailability of quotad.
Change-Id: I0d509fabc434dd55ce9ec59157123524197fcc80
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
BUG: 969461
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-on: http://review.gluster.org/6572
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Accounting was done in enforcer (though marker is the ultimate source
of truth) to offset cached directory size becoming stale. However,
with enforcer being moved to brick we can no longer maintain correct
cluster wide size for a directory. Hence removing accounting code from
enforcer.
Change-Id: I5ea94234da4da85ed5f5ced1354d8de3454b3fcb
BUG: 969461
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-on: http://review.gluster.org/6434
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Instead of just strings, provide the ability to specify a regex
of the pattern to expect
Change-Id: I6ada978197dceecc28490a2a40de73a04ab9abcd
Signed-off-by: Anand Avati <avati@redhat.com>
Reviewed-on: http://review.gluster.org/6788
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
stats
"volume profile info" automatically clears incremental stats. There
isn't a command to:
- fetch stats without clearing incremental stats and
- clear cumulative and incremental stats
This change introduces two arguments (i.e. peek and clear). 'clear'
will wipe both incremental and cumulative stats. 'peek' fetches stats
without wiping incremental stats.
'volume profile info peek' - fetches incremental and cumulative stats
without wiping incremental stats
'volume profile info incremental peek' - fetches incremental stats
without wiping incremental stats
'volume profile info clear' - clears both incremental and cumultiave
stats
Change-Id: I91834515ad672eca5f882809941147d7d997c4c9
BUG: 1047416
Signed-off-by: Dawit Alemu <dalemu@redhat.com>
Reviewed-on: http://review.gluster.org/6620
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Prevent mistaking the "compress" options for storage (at rest)
compression. The cdc-xlator is implemented to support compressing of
network traffic (READ and WRITE FOPs).
URL: http://www.gluster.org/community/documentation/index.php/Features/On-Wire_Compression_+_Decompression
Change-Id: I9fedf4106dcb226d135ab92e4b533aff284881d7
BUG: 1053670
CC: Venky Shankar <vshankar@redhat.com>
CC: Prashanth Pai <ppai@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/6765
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Also fixed check in dht_is_subvol_in_layout to check if the
layouts are zero'ed out.
Change-Id: I4bf8ebf66d3ef1946309b6c9aac9e79bf8a6d495
BUG: 969461
Signed-off-by: shishir gowda <sgowda@redhat.com>
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/6392
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Previously df -h used to display "Transport end point not connected"
for quota auxiliary mount after volume is stopped. This patch
unmounts the auxiliary mount when the volume is stopped in all peer
nodes for that volume.
Change-Id: I78abb44386cd8242a532f92c13df8bdb57c78e31
BUG: 1049323
Signed-off-by: Susant Palai <spalai@redhat.com>
Reviewed-on: http://review.gluster.org/6656
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
We have not meddled with mount point to check for it again.
Change-Id: I88eed777b6573a320065b9e14c2031db964e36d0
BUG: 1053362
Signed-off-by: Raghavendra Talur <rtalur@redhat.com>
Reviewed-on: http://review.gluster.org/6675
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
1. errno was being set after gf_log() in posix_{f}handle_pair, this
would cause errno to be overwritten.
2. dht would expect -1 for indication of failure in setxattr
callback (dht_err_cbk()). posix_{f}setxattr has been changed to set
op_ret as -1 instead of -op_errno.
3. dict_foreach() has been changed to return an error if the invoked
fn() returns < 0.
Bug report and test case credits to Zorro Lang <zlang@redhat.com>
Change-Id: I96c15f12a5d7717b7584ba392f390a0b4f704a98
BUG: 1051896
Signed-off-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-on: http://review.gluster.org/6684
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
Problem:
Under the entry self heal, readlink is done at the
source and sink. When readlink is done at the sink,
because link is not present at the sink, afr expects
ENOENT. AFR translator takes decisions for new link
creation based on ENOENT but server translator is modified
to return ESTALE because of which afr xlator is not able
to heal.
Fix:
The check for inode absence at server includes ESTALE as
well.
Change-Id: I319e4cb4156a243afee79365b7b7a5a7823e9a24
BUG: 1046624
Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com>
Reviewed-on: http://review.gluster.org/6599
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
NFS subdir mount does not respect nfs.rpc-auth-reject option
in the volume. If the volume is being mounted, then it would
validate the AUTH by mnt3_check_client_net() but if the client
is mounting a subdir, the control takes a different code path
i.e. mnt3_find_export() which does not bother about the AUTH.
FIX:
Enforce the AUTH check in mnt3_parse_dir_exports() which is
invoked by mnt3_find_export() for subdir mount.
Change-Id: I6fdd3e6bd6cbd32b0d9ca620cc4c30fdaff9ca30
BUG: 1049225
Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com>
Reviewed-on: http://review.gluster.org/6655
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Update the subvol_count when a peer imports information about the friend
volumes.
Change-Id: Id3884bd5727ff22be7ed87f43a1ec1b5fe34813c
BUG: 1047955
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/6629
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
