IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These resource agents plug glusterd into Open Cluster Framework
(OCF) compliant cluster resource managers, like Pacemaker.
The glusterd RA is fairly trivial; it simply manages the glusterd daemon
like any upstart or systemd job would, except that Pacemaker can
do it in a cluster-aware fashion.
The volume RA is a bit more involved; It starts a volume and monitors
individual brick's daemons in a cluster aware fashion, recovering bricks
when their processes fail.
Note that this does NOT imply people would deploy GlusterFS servers
in pairs, or anything of that nature. Pacemaker has the ability to
deploy cluster resources as clones, meaning glusterd and volumes would be
configured as follows in a Pacemaker cluster:
primitive p_glusterd ocf:glusterfs:glusterd \
op monitor interval="30"
primitive p_volume_demo ocf:glusterfs:volume \
params volname="demo" \
op monitor interval="10"
clone cl_glusterd p_glusterd \
meta interleave="true"
clone cl_volume_demo p_volume_demo \
meta interleave="true" ordered="true"
colocation c_volume_on_glusterd inf: cl_volume_demo cl_glusterd
order o_glusterd_before_volume 0: cl_glusterd cl_volume_demo
The cluster status then looks as follows (in a 4-node cluster; note
the configuration above could be applied, unchanged, to a cluster
of any number of nodes):
============
Last updated: Fri Mar 30 10:54:50 2012
Last change: Thu Mar 29 17:20:17 2012 via crmd on gluster02.h
Stack: openais
Current DC: gluster03.h - partition with quorum
Version: 1.1.6-3.el6-a02c0f19a00c1eb2527ad38f146ebc0834814558
4 Nodes configured, 4 expected votes
8 Resources configured.
============
Online: [ gluster02.h gluster03.h gluster04.h gluster01.h ]
Clone Set: cl_glusterd [p_glusterd]
Started: [ gluster02.h gluster03.h gluster04.h gluster01.h ]
Clone Set: cl_volume_demo [p_volume_demo]
Started: [ gluster01.h gluster02.h gluster03.h gluster04.h ]
This is also a way of providing automatic glusterd and brick recovery
in systems where neither upstart nor systemd are available.
Change-Id: Ied46657bdfd2dd72dc97cf41b0eb7adcecacd18f
BUG: 869559
Signed-off-by: Florian Haas <florian@hastexo.com>
Reviewed-on: http://review.gluster.org/3043
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
- First cut (configure plumbing only)
- Intended to allow people who want to test userspace
probes for their favourite xlator(s).
Change-Id: I5bf202073a2f1cc29dc4a55714167b7f48b463a1
BUG: 865734
Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-on: http://review.gluster.org/3638
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
CFLAGS
libtool will automatically add "-fPIC" to the compiler command line as
needed, so there is no need to specify it separately.
"-shared" is normally a linker flag and has an odd effect when used with
libtool --mode=compile, namely that it inhibits production of static
objects. For that however, using AC_DISABLE_STATIC is a lot simpler.
Change-Id: Ic4cba0fad18ffd985cf07f8d6951a976ae59a48f
BUG: 862082
Original-author: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/4027
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
automake warns: "INCLUDES" is the old name for "AM_CPPFLAGS"
(or "*_CPPFLAGS")
So abolish INCLUDES, and place the flags into GF_CPPFLAGS which then
needs to be mentioned for glusterd.
Change-Id: I326f890a69724d8b7163ce726f70ca4618c53958
BUG: 862082
Original-author: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/4016
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
Some -D flags are present in all files, so collect them.
This adds -D${GF_HOST_OS} to some compiler command lines,
but this should not be a problem.
Change-Id: I1aeb346143d4984c9cc4f2750c465ce09af1e6ca
BUG: 862082
Original-author: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/4013
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
The license message is changed to
Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com>
This file is part of GlusterFS.
This file is licensed to you under your choice of the GNU Lesser
General Public License, version 3 or any later version (LGPLv3 or
later), or the GNU General Public License, version 2 (GPLv2), in all
cases as published by the Free Software Foundation.
Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3858
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Currently default build adds -g -O2 to CFLAGS unconditionally
and there is no way to control them from configure.
This patch adds support for --enable-debug option to the
configure cmdline.
If yes, then only -g is added. If no, then -g -O2 is added.
Build defaults to --enable-debug=no.
Also fixes couple of Makefile.am's which had -g hardcoded.
v2:
Adds -O0 for debug=yes case.
v3:
Added bugID while submitting patch
Change-Id: I7505619be6fc683de463a0bd44ba5500b0bedfe1
BUG: 851092
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Reviewed-on: http://review.gluster.org/3822
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: Deepak Shetty <dpkshetty@gmail.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
as it is changed in RPM based install (using spec file), makes sense to do
it everywhere, even in source install
Change-Id: Ibe5ebd860b1529aca295b79d683a3b2e6797506c
Signed-off-by: Amar Tumballi <amar@gluster.com>
BUG: 824231
Reviewed-on: http://review.gluster.com/3338
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vijay@gluster.com>
Some systems (e.g.: NetBSD) do not have thread-safe basename(3) and
dirname(3). This is fine with OpenGroup's Single Unix Specification
which allows these functions to use static storage. Unfortunately,
glusterfs uses them a lot and assume thread-safety.
This patch brings FreeBSD's thread-safe basename_r(3) and dirname_r(3)
in the contrib directory, and tweaks the build process so that
NetBSD builds use them instead of libc basename(3) and dirname(3)
BUG: 764655
Change-Id: Ic9a159fffdc7bacc9408f8e90854e4c2db81930c
Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org>
Reviewed-on: http://review.gluster.com/3320
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
Ric asked me to look at replacing the GPL licensed MD5 code with
something better, i.e. perhaps faster, and with a less restrictive
license, etc. So I took a couple hour holiday from working on
wrapping up the client_t and did this.
OpenSSL (nee SSLeay) is released under the OpenSSL license, a BSD/MIT
style license. OpenSSL (libcrypto.so) is used on Linux, OS X and *BSD,
Open Solaris, etc. IOW it's universally available on the platforms we
care about. It's written by Eric Young (eay), now at EMC/RSA, and I
can say from experience that the OpenSSL implementation of MD5 (at least)
is every bit as fast as RSA's proprietary implementation (primarily
because the implementations are very, very similar.) The last time I
surveyed MD5 implementations I found they're all pretty much the same
speed.
I changed the APIs (and ABIs) for the strong and weak checksums.
Strictly speaking I didn't need to do that. They're only called on
short strings of data, i.e. pathnames, so using int32_t and uint32_t
is ostensibly okay. My change is arguably a better, more general API
for this sort of thing. It's also what bit me when gerrit/jenkins
validation failed due to glusterfs segv-ing. (I didn't pay close enough
attention to the implementation of the weak checksum. But it forced me
to learn what gerrit/jenkins are doing and going forward I can do better
testing before submitting to gerrit.)
Now resubmitting with a BZ
Change-Id: I545fade1604e74fc68399894550229bd57a5e0df
BUG: 807718
Signed-off-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.com/3019
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
With "trash" removed from xlators/features/Makefile.am but not from
configure.ac, configure fails trying to create .../features/Makefile
from .../features/Makefile.in which was itself never created.
Change-Id: Idcba2c282c09821ae620e59748952e8d26117fdc
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.com/3003
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
Reviewed-by: Vijay Bellur <vijay@gluster.com>
- preserve CLI set option key as "performance.stat-prefetch"
- create a symlink stat-prefetch.so to point to md-cache.so
Change-Id: Ib95e7c30073f13ae04c39e9466967ba1db5a0614
BUG: 765785
Reviewed-on: http://review.gluster.com/2714
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
This is a metadata caching translator which is well integrated with
glusterfs core framework and leverages some of the recent protocol
changes to do a better job at caching.
- It uses the attributes returned along callbacks of all calls to
update its attribute cache as frequently as possible without
issuing calls on its own (i.e, very low overhead)
- It caches attributes returned via readdirp into the inode contexts
corresponding to those entries (i.e, well integrated)
- It caches and updates xattrs and not just inode attributes (i.e,
eliminates the need for a separate xattr-prefetch translator)
In its current form it has a timeout based consistency model
Change-Id: I891f6225c1a4c08bb111e287571d5f6d326dbe97
BUG: 765785
Reviewed-on: http://review.gluster.com/2713
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
with FSH and Redhat/Fedora requirements.
Created a single spec that works for both 3.1 and 3.2 versions.
Releases will now require changing the source url in configure.ac
at the same time the release version is set.
OLDBUG: 2970
BUG: 764702
Change-Id: I1ec9d10fce6dbd72c329d04c7ad61df2ad117adb
Signed-off-by: Joe Julian <me@joejulian.name>
Reviewed-on: http://review.gluster.com/701
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vijay@gluster.com>
Just the same way e2fsprogs maintains. This avoids unnecessary problems
for different architectures.
Change-Id: I3911998373756707996afb7b926ec0780ea18b81
BUG: 3833
Signed-off-by: Harshavardhana <fharshav@redhat.com>
Reviewed-on: http://review.gluster.com/764
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-by: Amar Tumballi <amar@gluster.com>
linkat()é is guarded by -D_INCOMPLETE_XOPEN_C063 for now since support
for OpenGroup extended API set 2 is not yet complete.
Change-Id: If1038dac61b6945c73a208c6e05f1154ff913098
BUG: 2923
Reviewed-on: http://review.gluster.com/232
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-by: Anand Avati <avati@gluster.com>
This rewrite does not change functionality;
it's purpose is to prepare followup modifications which will let
all slave side helper programs being dispatched to through
gsyncd. The string processing that's required for that task would
be too much cumbersome in shell.
Change-Id: Ia7858aba5efeb5dcff16a918ea1c02253f0e49ab
BUG: 2825
Reviewed-on: http://review.gluster.com/459
Reviewed-by: Amar Tumballi <amar@gluster.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vijay@gluster.com>
non Linux systems
- Also use mkfifo to create FIFO on NetBSD: it does not wotk with mknod
Change-Id: I19ffd22b4d79009ef5f9d4a50fc6dd556c3c3ff4
BUG: 2923
Reviewed-on: http://review.gluster.com/226
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
make the build even more quiet.
make anush even more happy by saving even more trees.
Change-Id: I301aba34e4470805114989650a13f9fe35f42d35
BUG: 3255
Reviewed-on: http://review.gluster.com/176
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
make the build more silent
Change-Id: Ied4c87c40af4b1f1034af4a13c1153d82883751b
BUG: 3255
Reviewed-on: http://review.gluster.com/171
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
- NetBSD uses libperfuse(3).
- Add @GF_FUSE_LDADD@ to fuse.so library dependecies so that -lperfuse is
added at configure time for NetBSD.
Thanks to: Emmanuel Dreyfus <manu@netbsd.org>
Signed-off-by: Anand Avati <avati@gluster.com>
BUG: 2923 (NetBSD port)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2923
On NetBSD use libperfuse(3), rename umount2(2) as unmount(2), and skip
inexistant /etc/mtab management.
Thanks to: Emmanuel Dreyfus <manu@netbsd.org>
Signed-off-by: Anand Avati <avati@gluster.com>
BUG: 2923 (NetBSD port)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2923
Disable geosync build for non-linux platforms.
And fix solaris related build failures.The symbol getxattr was not
available on solaris. The build on linux passed as getxattr symbol was
available in the library. The argument was not being used, hence
removed it.
Make 64 bit build default in CFLAGS option by passing -m64 option
Signed-off-by: Shishir Gowda <shishirng@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 2440 (Fix solaris build issues seen on latest git)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2440
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 2393 ('gluster-volgen' and 'gluster-defrag' scripts are stale, but present in AMI)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2393
'Quiesce' is used to describe pausing or altering the state of running
processes on a computer
In GlusterFS context, this translator looks for CHILD_DOWN/CHILD_UP
events, and will hold the requests for some time if the child node
is in disconnected state
current timeout is 20seconds, will be made tunable soon
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1500 (Mount point should not be in-accessible between reconnect to server)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1500
