IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There was no consistency between all the functions used to exchange data
between a buffer and a stream interface. Also, the functions used to send
data to a buffer did not consider the possibility that the buffer was
shutdown for read.
Now the functions are called buffer_{put,get}_{char,block,chunk,string}.
The old buffer_feed* functions have been left available for existing code
but marked deprecated.
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
Signal zero is never delivered by the system. However having a signal to
which functions and tasks can subscribe to be notified of a stopping event
is useful. So this patch does two things :
1) allow signal zero to be delivered from any function of signal handler
2) make soft_stop() deliver this signal so that tasks can be notified of
a stopping condition.
The two new functions below make it possible to register any number
of functions or tasks to a system signal. They will be called in the
registration order when the signal is received.
struct sig_handler *signal_register_fct(int sig, void (*fct)(struct sig_handler *), int arg);
struct sig_handler *signal_register_task(int sig, struct task *task, int reason);
In case of binding failure during startup, we wait for some time sending
signals to old pids so that they release the ports we need. But if there
aren't any old pids anymore, it's useless to wait, we prefer to fail fast.
Along with this change, we now have the number of old pids really found
in the nb_oldpids variable.
In case of HTTP keepalive processing, we want to release the counters tracked
by the backend. Till now only the second set of counters was released, while
it could have been assigned by the frontend, or the backend could also have
assigned the first set. Now we reuse to unused bits of the session flags to
mark which stick counters were assigned by the backend and to release them as
appropriate.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
It is now possible to dump some select table entries based on criteria
which apply to the stored data. This is enabled by appending the following
options to the end of the "show table" statement :
data.<data_type> {eq|ne|lt|gt|le|ge} <value>
For intance :
show table http_proxy data.conn_rate gt 5
show table http_proxy data.gpc0 ne 0
The compare applies to the integer value as it would be displayed, and
operates on signed long long integers.
It's a bit cumbersome to have to know all possible storable types
from the stats interface. Instead, let's have generic types for
all data, which will facilitate their manipulation.
It is now possible to dump a table's contents with keys, expire,
use count, and various data using the command above on the stats
socket.
"show table" only shows main table stats, while "show table <name>"
dumps table contents, only if the socket level is admin.
This patch adds support for the following session counters :
- http_req_cnt : HTTP request count
- http_req_rate: HTTP request rate
- http_err_cnt : HTTP request error count
- http_err_rate: HTTP request error rate
The equivalent ACLs have been added to check the tracked counters
for the current session or the counters of the current source.
This counter may be used to track anything. Two sets of ACLs are available
to manage it, one gets its value, and the other one increments its value
and returns it. In the second case, the entry is created if it did not
exist.
Thus it is possible for example to mark a source as being an abuser and
to keep it marked as long as it does not wait for the entry to expire :
# The rules below use gpc0 to track abusers, and reject them if
# a source has been marked as such. The track-counters statement
# automatically refreshes the entry which will not expire until a
# 1-minute silence is respected from the source. The second rule
# evaluates the second part if the first one is true, so GPC0 will
# be increased once the conn_rate is above 100/5s.
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request track-counters src
tcp-request reject if { trk_get_gpc0 gt 0 }
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
Alternatively, it is possible to let the entry expire even in presence of
traffic by swapping the check for gpc0 and the track-counters statement :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
It is also possible not to track counters at all, but entry lookups will
then be performed more often :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request reject if { src_conn_rate gt 100 } { src_inc_gpc0 gt 0}
The '0' at the end of the counter name is there because if we find that more
counters may be useful, other ones will be added.
This function looks up a key, updates its expiration date, or creates
it if it was not found. acl_fetch_src_updt_conn_cnt() was updated to
make use of it.
These counters maintain incoming and outgoing byte rates in a stick-table,
over a period which is defined in the configuration (2 ms to 24 days).
They can be used to detect service abuse and enforce a certain bandwidth
limits per source address for instance, and block if the rate is passed
over. Since 32-bit counters are used to compute the rates, it is important
not to use too long periods so that we don't have to deal with rates above
4 GB per period.
Example :
# block if more than 5 Megs retrieved in 30 seconds from a source.
stick-table type ip size 200k expire 1m store bytes_out_rate(30s)
tcp-request track-counters src
tcp-request reject if { trk_bytes_out_rate gt 5000000 }
# cause a 15 seconds pause to requests from sources in excess of 2 megs/30s
tcp-request inspect-delay 15s
tcp-request content accept if { trk_bytes_out_rate gt 2000000 } WAIT_END
These counters maintain incoming connection rates and session rates
in a stick-table, over a period which is defined in the configuration
(2 ms to 24 days). They can be used to detect service abuse and
enforce a certain accept rate per source address for instance, and
block if the rate is passed over.
Example :
# block if more than 50 requests per 5 seconds from a source.
stick-table type ip size 200k expire 1m store conn_rate(5s),sess_rate(5s)
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 50 }
# cause a 3 seconds pause to requests from sources in excess of 20 requests/5s
tcp-request inspect-delay 3s
tcp-request content accept if { trk_sess_rate gt 20 } WAIT_END
We're now able to return errors based on the validity of an argument
passed to a stick-table store data type. We also support ARG_T_DELAY
to pass delays to stored data types (eg: for rate counters).
Some data types will require arguments (eg: period for a rate counter).
This patch adds support for such arguments between parenthesis in the
"store" directive of the stick-table statement. Right now only integers
are supported.
When a session tracks a counter, automatically increase the cumulated
connection count. This makes src_updt_conn_cnt() almost useless. In
fact it might still be used to update different tables.
The new "bytes_in_cnt" and "bytes_out_cnt" session counters have been
added. They're automatically updated when session counters are updated.
They can be matched with the "src_kbytes_in" and "src_kbytes_out" ACLs
which apply to the volume per source address. This can be used to deny
access to service abusers.
The new "conn_cur" session counter has been added. It is automatically
updated upon "track XXX" directives, and the entry is touched at the
moment we increment the value so that we don't consider further counter
updates as real updates, otherwise we would end up updating upon completion,
which may not be desired. Probably that some other event counters (eg: HTTP
requests) will have to be updated upon each event though.
This counter can be matched against current session's source address using
the "src_conn_cur" ACL.
The "_cnt" suffix is already used by ACLs to count various data,
so it makes sense to use the same one in "conn_cnt" instead of
"conn_cum" to count cumulated connections.
This is not a problem because no version was emitted with those
keywords.
Thus we'll try to stick to the following rules :
xxxx_cnt : cumulated event count for criterion xxxx
xxxx_cur : current number of concurrent entries for criterion xxxx
xxxx_rate: event rate for criterion xxxx
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
The buffer_feed* functions that are used to send data to buffers did only
support sending contiguous chunks while they're relying on memcpy(). This
patch improves on this by making them able to write in two chunks if needed.
Thus, the buffer_almost_full() function has been improved to really consider
the remaining space and not just what can be written at once.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
Some config parsing functions need to return composite status codes
when they rely on other functions. Let's provide a few such codes
for general use and extend them later.
Some freq counters will have to work on periods different from 1 second.
The original freq counters rely on the period to be exactly one second.
The new ones (freq_ctr_period) let the user define the period in ticks,
and all computations are operated over that period. When reading a value,
it indicates the amount of events over that period too.
We'll need to divide 64 bits by 32 bits with new frequency counters.
Gcc does not know when it can safely do that, but the way we build
our operations let us be sure. So let's provide an optimised version
for that purpose.
This member will be used later when frontends are created on the
fly by some tasks. It will also be usable later if we need to
support multiple config instances for example.
When a connection is closed on a stream interface, some iohandlers
will need to be informed in order to release some resources. This
normally happens upon a shutr+shutw. It is the equivalent of the
fd_delete() call which is done for real sockets, except that this
time we release internal resources.
It can also be used with real sockets because it does not cost
anything else and might one day be useful.
The quote_arg() function can be used to quote an argument or indicate
"end of line" if it's null or empty. It should be useful to more precisely
report location of problems in the configuration.
When an entry already exists, we just need to update its expiration
timer. Let's have a dedicated function for that instead of spreading
open code everywhere.
This change also ensures that an update of an existing sticky session
really leads to an update of its expiration timer, which was apparently
not the case till now. This point needs to be checked in 1.4.
Till now sticky sessions only held server IDs. Now there are other
data types so it is not acceptable anymore to overwrite the server ID
when writing something. The server ID must then only be written from
the caller when appropriate. Doing this has also led to separate
lookup and storage.
This one can be parsed on the "stick-table" after with the "store"
keyword. It will hold the number of connections matching the entry,
for use with ACLs or anything else.
The stick_tables will now be able to store extra data for a same key.
A limited set of extra data types will be defined and for each of them
an offset in the sticky session will be assigned at startup time. All
of this information will be stored in the stick table.
The extra data types will have to be specified after the new "store"
keyword of the "stick-table" directive, which will reserve some space
for them.
pattern.c depended on stick_table while in fact it should be the opposite.
So we move from pattern.c everything related to stick_tables and invert the
dependency. That way the code becomes more logical and intuitive.
The name 'exps' and 'keys' in struct stksess was confusing because it was
the same name as in the table which holds all of them, while they only hold
one node each. Remove the trailing 's' to more clearly identify who's who.
Right now we're only able to store a server ID in a sticky session.
The goal is to be able to store anything whose size is known at startup
time. For this, we store the extra data before the stksess pointer,
using a negative offset. It will then be easy to cumulate multiple
data provided they each have their own offset.
