1999-02-19 03:21:36 +03:00
/*
* Copyright ( c ) 1991 , 1992 Paul Kranenburg < pk @ cs . few . eur . nl >
* Copyright ( c ) 1993 Branko Lankester < branko @ hacktic . nl >
* Copyright ( c ) 1993 , 1994 , 1995 , 1996 Rick Sladkey < jrs @ world . std . com >
1999-12-23 17:20:14 +03:00
* Copyright ( c ) 1996 - 1999 Wichert Akkerman < wichert @ cistron . nl >
1999-02-19 03:21:36 +03:00
* All rights reserved .
*
* Redistribution and use in source and binary forms , with or without
* modification , are permitted provided that the following conditions
* are met :
* 1. Redistributions of source code must retain the above copyright
* notice , this list of conditions and the following disclaimer .
* 2. Redistributions in binary form must reproduce the above copyright
* notice , this list of conditions and the following disclaimer in the
* documentation and / or other materials provided with the distribution .
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission .
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ` ` AS IS ' ' AND ANY EXPRESS OR
* IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED .
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT , INDIRECT ,
* INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL DAMAGES ( INCLUDING , BUT
* NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE ,
* DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT
* ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*/
# include "defs.h"
2011-05-23 23:29:03 +04:00
# include <stdarg.h>
1999-02-19 03:21:36 +03:00
# include <sys/param.h>
# include <fcntl.h>
2015-07-18 02:56:54 +03:00
# include <signal.h>
1999-02-19 03:21:36 +03:00
# include <sys/resource.h>
# include <sys/wait.h>
# include <sys/stat.h>
# include <pwd.h>
# include <grp.h>
2004-04-09 04:25:21 +04:00
# include <dirent.h>
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
# include <sys/utsname.h>
2013-05-13 22:43:28 +04:00
# ifdef HAVE_PRCTL
# include <sys / prctl.h>
# endif
2015-02-13 03:26:38 +03:00
# include "ptrace.h"
2015-07-18 02:56:54 +03:00
# include "printsiginfo.h"
2015-02-13 03:26:38 +03:00
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
/* In some libc, these aren't declared. Do it ourself: */
2008-12-29 22:13:27 +03:00
extern char * * environ ;
Two cleanups: tcb table expansion failure is not really a survivable
event, we do not have any viable way to continue. No wonder most
places where that is detected have FIXMEs.
It's way simpler to treat as fatal failure, and handle it inside
tcb table expansion finctions.
Second cleanup: tidy up haphazard locations of a few externs.
* defs.h: Change return type of expand_tcbtab() to void.
Declare change_syscall().
* process.c: Change all callsites of alloctcb(), alloc_tcb() and
fork_tcb(), removing now-redundant error checks.
(fork_tcb): Change return type to void - it can't fail now.
* strace.c: Move extern declarations out of function bodies.
Change all callsites of alloctcb(), alloc_tcb() and
fork_tcb(), removing now-redundant error checks.
(expand_tcbtab): Change return type to void - it can't fail now.
On failure to expand, print a message, clean up, and exit.
(alloc_tcb): On failure to expand, print a message, clean up, and exit.
* util.c (setbpt): Remove extern declaration from function body.
2009-01-17 04:52:54 +03:00
extern int optind ;
extern char * optarg ;
2008-12-29 22:13:27 +03:00
2013-07-23 11:11:35 +04:00
# ifdef USE_LIBUNWIND
/* if this is true do the stack trace for every system call */
bool stack_trace_enabled = false ;
# endif
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
# if defined __NR_tkill
# define my_tkill(tid, sig) syscall(__NR_tkill, (tid), (sig))
# else
/* kill() may choose arbitrarily the target task of the process group
while we later wait on a that specific TID . PID process waits become
TID task specific waits for a process under ptrace ( 2 ) . */
2012-09-13 12:28:43 +04:00
# warning "tkill(2) not available, risk of strace hangs!"
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
# define my_tkill(tid, sig) kill((tid), (sig))
# endif
2013-02-19 18:30:12 +04:00
/* Glue for systems without a MMU that cannot provide fork() */
# if !defined(HAVE_FORK)
# undef NOMMU_SYSTEM
# define NOMMU_SYSTEM 1
# endif
# if NOMMU_SYSTEM
# define fork() vfork()
# endif
Remove support for systems without PTRACE_SETOPTIONS
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
2015-02-08 16:05:53 +03:00
const unsigned int syscall_trap_sig = SIGTRAP | 0x80 ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
cflag_t cflag = CFLAG_NONE ;
unsigned int followfork = 0 ;
Remove support for systems without PTRACE_SETOPTIONS
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
2015-02-08 16:05:53 +03:00
unsigned int ptrace_setoptions = PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
unsigned int xflag = 0 ;
bool debug_flag = 0 ;
bool Tflag = 0 ;
2013-07-12 14:22:06 +04:00
bool iflag = 0 ;
2014-05-28 20:52:40 +04:00
bool count_wallclock = 0 ;
2013-05-13 14:30:55 +04:00
unsigned int qflag = 0 ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
static unsigned int tflag = 0 ;
static bool rflag = 0 ;
static bool print_pid_pfx = 0 ;
2012-01-29 19:53:03 +04:00
/* -I n */
enum {
INTR_NOT_SET = 0 ,
INTR_ANYWHERE = 1 , /* don't block/ignore any signals */
INTR_WHILE_WAIT = 2 , /* block fatal signals while decoding syscall. default */
INTR_NEVER = 3 , /* block fatal signals. default if '-o FILE PROG' */
INTR_BLOCK_TSTP_TOO = 4 , /* block fatal signals and SIGTSTP (^Z) */
NUM_INTR_OPTS
} ;
static int opt_intr ;
/* We play with signal mask only if this mode is active: */
# define interactive (opt_intr == INTR_WHILE_WAIT)
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
/*
* daemonized_tracer supports - D option .
* With this option , strace forks twice .
* Unlike normal case , with - D * grandparent * process exec ' s ,
* becoming a traced process . Child exits ( this prevents traced process
* from having children it doesn ' t expect to have ) , and grandchild
* attaches to grandparent similarly to strace - p PID .
* This allows for more transparent interaction in cases
* when process and its parent are communicating via signals ,
* wait ( ) etc . Without - D , strace process gets lodged in between ,
* disrupting parent < - > child link .
*/
static bool daemonized_tracer = 0 ;
1999-02-19 03:21:36 +03:00
2013-02-19 18:30:12 +04:00
# if USE_SEIZE
2012-01-29 05:01:44 +04:00
static int post_attach_sigstop = TCB_IGNORE_ONE_SIGSTOP ;
# define use_seize (post_attach_sigstop == 0)
# else
# define post_attach_sigstop TCB_IGNORE_ONE_SIGSTOP
# define use_seize 0
# endif
2002-11-06 16:17:21 +03:00
/* Sometimes we want to print only succeeding syscalls. */
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
bool not_failing_only = 0 ;
2002-11-06 16:17:21 +03:00
2011-04-08 00:25:40 +04:00
/* Show path associated with fd arguments */
2014-08-09 03:38:26 +04:00
unsigned int show_fd_path = 0 ;
2011-04-08 00:25:40 +04:00
2012-03-15 16:44:17 +04:00
static bool detach_on_execve = 0 ;
2013-05-14 18:07:46 +04:00
/* Are we "strace PROG" and need to skip detach on first execve? */
static bool skip_one_b_execve = 0 ;
/* Are we "strace PROG" and need to hide everything until execve? */
bool hide_log_until_execve = 0 ;
2012-03-15 16:44:17 +04:00
2008-11-10 20:14:58 +03:00
static int exit_code = 0 ;
static int strace_child = 0 ;
2011-05-27 16:36:01 +04:00
static int strace_tracer_pid = 0 ;
2009-06-03 03:49:22 +04:00
2006-12-13 19:59:44 +03:00
static char * username = NULL ;
2011-06-25 00:49:58 +04:00
static uid_t run_uid ;
static gid_t run_gid ;
1999-02-19 03:21:36 +03:00
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
unsigned int max_strlen = DEFAULT_STRLEN ;
2012-03-26 01:49:48 +04:00
static int acolumn = DEFAULT_ACOLUMN ;
2011-08-25 03:27:59 +04:00
static char * acolumn_spaces ;
2012-03-22 12:56:20 +04:00
2006-12-13 19:59:44 +03:00
static char * outfname = NULL ;
2012-03-22 12:56:20 +04:00
/* If -ff, points to stderr. Else, it's our common output log */
static FILE * shared_log ;
2012-01-28 04:25:03 +04:00
struct tcb * printing_tcp = NULL ;
2012-03-22 12:56:20 +04:00
static struct tcb * current_tcp ;
2011-06-25 00:49:58 +04:00
static struct tcb * * tcbtab ;
2011-06-22 14:45:25 +04:00
static unsigned int nprocs , tcbtabsize ;
2011-06-25 00:49:58 +04:00
static const char * progname ;
1999-02-19 03:21:36 +03:00
2013-02-14 06:29:48 +04:00
unsigned os_release ; /* generated from uname()'s u.release */
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2013-06-20 13:20:23 +04:00
static void detach ( struct tcb * tcp ) ;
2009-10-27 18:56:43 +03:00
static void cleanup ( void ) ;
static void interrupt ( int sig ) ;
1999-02-19 03:21:36 +03:00
static sigset_t empty_set , blocked_set ;
# ifdef HAVE_SIG_ATOMIC_T
static volatile sig_atomic_t interrupted ;
2012-01-29 19:43:51 +04:00
# else
1999-02-19 03:21:36 +03:00
static volatile int interrupted ;
2012-01-29 19:43:51 +04:00
# endif
1999-02-19 03:21:36 +03:00
2012-03-15 20:24:49 +04:00
# ifndef HAVE_STRERROR
# if !HAVE_DECL_SYS_ERRLIST
extern int sys_nerr ;
extern char * sys_errlist [ ] ;
2012-03-16 15:02:22 +04:00
# endif
2012-03-15 20:24:49 +04:00
const char *
strerror ( int err_no )
{
static char buf [ sizeof ( " Unknown error %d " ) + sizeof ( int ) * 3 ] ;
if ( err_no < 1 | | err_no > = sys_nerr ) {
sprintf ( buf , " Unknown error %d " , err_no ) ;
return buf ;
}
return sys_errlist [ err_no ] ;
}
# endif /* HAVE_STERRROR */
1999-02-19 03:21:36 +03:00
static void
2015-11-26 17:18:00 +03:00
usage ( )
1999-02-19 03:21:36 +03:00
{
2015-11-26 17:18:00 +03:00
printf ( " \
2015-11-26 06:25:12 +03:00
usage : strace [ - CdffhiqrtttTvVwxxy ] [ - I n ] [ - e expr ] . . . \ n \
2012-03-26 15:10:50 +04:00
[ - a column ] [ - o file ] [ - s strsize ] [ - P path ] . . . \ n \
- p pid . . . / [ - D ] [ - E var = val ] . . . [ - u username ] PROG [ ARGS ] \ n \
2015-11-26 06:25:12 +03:00
or : strace - c [ dfw ] [ - I n ] [ - e expr ] . . . [ - O overhead ] [ - S sortby ] \ n \
2012-03-26 15:10:50 +04:00
- p pid . . . / [ - D ] [ - E var = val ] . . . [ - u username ] PROG [ ARGS ] \ n \
2015-11-26 06:25:12 +03:00
\ n \
Output format : \ n \
- a column alignment COLUMN for printing syscall results ( default % d ) \ n \
- i print instruction pointer at time of syscall \ n \
- o file send trace output to FILE instead of stderr \ n \
- q suppress messages about attaching , detaching , etc . \ n \
- r print relative timestamp \ n \
- s strsize limit length of print strings to STRSIZE chars ( default % d ) \ n \
- t print absolute timestamp \ n \
- tt print absolute timestamp with usecs \ n \
- T print time spent in each syscall \ n \
- x print non - ascii strings in hex \ n \
- xx print all strings in hex \ n \
- y print paths associated with file descriptor arguments \ n \
- yy print ip : port pairs associated with socket file descriptors \ n \
\ n \
Statistics : \ n \
- c count time , calls , and errors for each syscall and report summary \ n \
- C like - c but also print regular output \ n \
- O overhead set overhead for tracing syscalls to OVERHEAD usecs \ n \
- S sortby sort syscall counts by : time , calls , name , nothing ( default % s ) \ n \
- w summarise syscall latency ( default is system time ) \ n \
\ n \
Filtering : \ n \
- e expr a qualifying expression : option = [ ! ] all or option = [ ! ] val1 [ , val2 ] . . . \ n \
options : trace , abbrev , verbose , raw , signal , read , write \ n \
- P path trace accesses to path \ n \
\ n \
Tracing : \ n \
- b execve detach on execve syscall \ n \
- D run tracer process as a detached grandchild , not as parent \ n \
- f follow forks \ n \
- ff follow forks with output into separate files \ n \
- I interruptible \ n \
1 : no signals are blocked \ n \
2 : fatal signals are blocked while decoding syscall ( default ) \ n \
3 : fatal signals are always blocked ( default if ' - o FILE PROG ' ) \ n \
4 : fatal signals and SIGTSTP ( ^ Z ) are always blocked \ n \
( useful to make ' strace - o FILE PROG ' not stop on ^ Z ) \ n \
\ n \
Startup : \ n \
- E var remove var from the environment for command \ n \
- E var = val put var = val in the environment for command \ n \
- p pid trace process with process id PID , may be repeated \ n \
- u username run command as username handling setuid and / or setgid \ n \
\ n \
Miscellaneous : \ n \
- d enable debug output to stderr \ n \
- v verbose mode : print unabbreviated argv , stat , termios , etc . args \ n \
- h print help message \ n \
- V print version \ n \
2012-03-15 16:44:17 +04:00
"
2013-07-23 11:11:35 +04:00
# ifdef USE_LIBUNWIND
2015-11-26 06:25:12 +03:00
" -k obtain stack trace between each syscall (experimental) \n \
2013-07-23 11:11:35 +04:00
"
# endif
2013-02-26 14:33:54 +04:00
/* ancient, no one should use it
- F - - attempt to follow vforks ( deprecated , use - f ) \ n \
*/
2012-03-15 16:44:17 +04:00
/* this is broken, so don't document it
2002-11-06 16:17:21 +03:00
- z - - print only succeeding syscalls \ n \
2012-03-15 16:44:17 +04:00
*/
2003-01-24 07:31:23 +03:00
, DEFAULT_ACOLUMN , DEFAULT_STRLEN , DEFAULT_SORTBY ) ;
2015-11-26 17:18:00 +03:00
exit ( 0 ) ;
1999-02-19 03:21:36 +03:00
}
Use macros for gcc attributes
* defs.h (error_msg, perror_msg, error_msg_and_die, perror_msg_and_die,
die_out_of_memory, printllval, printnum_int, printnum_long, tprintf):
Use ATTRIBUTE_* macros for gcc attributes.
* file.c (struct stat64): Likewise.
* statfs.c (struct compat_statfs64): Likewise.
* strace.c (die, exec_or_die, init): Likewise.
* linux/sparc/arch_sigreturn.c: Likewise.
* linux/ubi-user.h: Likewise.
2015-03-30 01:45:03 +03:00
static void ATTRIBUTE_NORETURN
die ( void )
2011-05-27 16:36:01 +04:00
{
if ( strace_tracer_pid = = getpid ( ) ) {
cflag = 0 ;
cleanup ( ) ;
}
exit ( 1 ) ;
}
static void verror_msg ( int err_no , const char * fmt , va_list p )
2011-05-23 23:29:03 +04:00
{
2012-01-24 13:17:18 +04:00
char * msg ;
2011-06-09 19:50:41 +04:00
fflush ( NULL ) ;
2012-01-24 13:17:18 +04:00
/* We want to print entire message with single fprintf to ensure
* message integrity if stderr is shared with other programs .
* Thus we use vasprintf + single fprintf .
*/
msg = NULL ;
2012-01-24 15:48:02 +04:00
if ( vasprintf ( & msg , fmt , p ) > = 0 ) {
2012-01-24 13:17:18 +04:00
if ( err_no )
fprintf ( stderr , " %s: %s: %s \n " , progname , msg , strerror ( err_no ) ) ;
else
fprintf ( stderr , " %s: %s \n " , progname , msg ) ;
free ( msg ) ;
} else {
/* malloc in vasprintf failed, try it without malloc */
fprintf ( stderr , " %s: " , progname ) ;
vfprintf ( stderr , fmt , p ) ;
if ( err_no )
fprintf ( stderr , " : %s \n " , strerror ( err_no ) ) ;
else
putc ( ' \n ' , stderr ) ;
}
/* We don't switch stderr to buffered, thus fprintf(stderr)
* always flushes its output and this is not necessary : */
/* fflush(stderr); */
2011-05-27 16:36:01 +04:00
}
void error_msg ( const char * fmt , . . . )
{
va_list p ;
va_start ( p , fmt ) ;
verror_msg ( 0 , fmt , p ) ;
2011-05-23 23:29:03 +04:00
va_end ( p ) ;
2011-05-27 16:36:01 +04:00
}
2011-05-23 23:29:03 +04:00
2011-05-27 16:36:01 +04:00
void error_msg_and_die ( const char * fmt , . . . )
{
va_list p ;
va_start ( p , fmt ) ;
verror_msg ( 0 , fmt , p ) ;
die ( ) ;
}
2015-11-26 17:18:00 +03:00
void error_msg_and_help ( const char * fmt , . . . )
{
if ( fmt ! = NULL ) {
va_list p ;
va_start ( p , fmt ) ;
verror_msg ( 0 , fmt , p ) ;
}
fprintf ( stderr , " Try '%s -h' for more information. \n " , progname ) ;
die ( ) ;
}
2011-05-27 16:36:01 +04:00
void perror_msg ( const char * fmt , . . . )
{
va_list p ;
va_start ( p , fmt ) ;
verror_msg ( errno , fmt , p ) ;
va_end ( p ) ;
}
void perror_msg_and_die ( const char * fmt , . . . )
{
va_list p ;
va_start ( p , fmt ) ;
verror_msg ( errno , fmt , p ) ;
die ( ) ;
2011-05-23 23:29:03 +04:00
}
2012-03-26 01:49:48 +04:00
static void
error_opt_arg ( int opt , const char * arg )
{
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " invalid -%c argument: '%s' " , opt , arg ) ;
2012-03-26 01:49:48 +04:00
}
2013-02-19 18:30:12 +04:00
# if USE_SEIZE
2012-01-29 05:01:44 +04:00
static int
ptrace_attach_or_seize ( int pid )
{
int r ;
if ( ! use_seize )
2013-07-10 16:33:05 +04:00
return ptrace ( PTRACE_ATTACH , pid , 0L , 0L ) ;
Remove support for systems without PTRACE_SETOPTIONS
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
2015-02-08 16:05:53 +03:00
r = ptrace ( PTRACE_SEIZE , pid , 0L , ( unsigned long ) ptrace_setoptions ) ;
2012-01-29 05:01:44 +04:00
if ( r )
return r ;
2013-07-10 16:33:05 +04:00
r = ptrace ( PTRACE_INTERRUPT , pid , 0L , 0L ) ;
2012-01-29 05:01:44 +04:00
return r ;
}
# else
# define ptrace_attach_or_seize(pid) ptrace(PTRACE_ATTACH, (pid), 0, 0)
# endif
2012-03-20 19:26:25 +04:00
/*
* Used when we want to unblock stopped traced process .
* Should be only used with PTRACE_CONT , PTRACE_DETACH and PTRACE_SYSCALL .
* Returns 0 on success or if error was ESRCH
* ( presumably process was killed while we talk to it ) .
* Otherwise prints error message and returns - 1.
*/
static int
ptrace_restart ( int op , struct tcb * tcp , int sig )
{
int err ;
const char * msg ;
errno = 0 ;
ptrace ( op , tcp - > pid , ( void * ) 0 , ( long ) sig ) ;
err = errno ;
Report some ptrace failures; nuke tcp->ptrace_errno
Report some (not all) ptrace errors, namely,
errors on ptrace restart operations.
Before: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <unfinished ...>
After: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <ptrace(SYSCALL):No such process>
This tells user that strace failed to let sendto syscall
to be entered - process was dead at that point of time.
It is (marginally) better than to always say "<unfinished ...>"
While at it, patch removes tcp->ptrace_errno.
I added it many months ago, and it looks that after all
it is not needed for ptrace error detection: I failed to execute
a single existing code path which is accessible
through that variable only.
* defs.h: Remove struct tcp::ptrace_errno field.
* strace.c (ptrace_restart): Emit message to log on error.
(printleader): Remove "if (printing_tcp->ptrace_errno)..." code.
(trace): Remove !tcp->ptrace_errno check, it's always true.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-21 13:32:49 +04:00
if ( ! err )
2012-03-20 19:26:25 +04:00
return 0 ;
msg = " SYSCALL " ;
if ( op = = PTRACE_CONT )
msg = " CONT " ;
if ( op = = PTRACE_DETACH )
msg = " DETACH " ;
# ifdef PTRACE_LISTEN
if ( op = = PTRACE_LISTEN )
msg = " LISTEN " ;
# endif
Report some ptrace failures; nuke tcp->ptrace_errno
Report some (not all) ptrace errors, namely,
errors on ptrace restart operations.
Before: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <unfinished ...>
After: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <ptrace(SYSCALL):No such process>
This tells user that strace failed to let sendto syscall
to be entered - process was dead at that point of time.
It is (marginally) better than to always say "<unfinished ...>"
While at it, patch removes tcp->ptrace_errno.
I added it many months ago, and it looks that after all
it is not needed for ptrace error detection: I failed to execute
a single existing code path which is accessible
through that variable only.
* defs.h: Remove struct tcp::ptrace_errno field.
* strace.c (ptrace_restart): Emit message to log on error.
(printleader): Remove "if (printing_tcp->ptrace_errno)..." code.
(trace): Remove !tcp->ptrace_errno check, it's always true.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-21 13:32:49 +04:00
/*
* Why curcol ! = 0 ? Otherwise sometimes we get this :
*
* 10252 kill ( 10253 , SIGKILL ) = 0
* < ptrace ( SYSCALL , 10252 ) : No such process > 10253 . . . next decode . . .
*
* 10252 died after we retrieved syscall exit data ,
* but before we tried to restart it . Log looks ugly .
*/
2012-03-22 12:56:20 +04:00
if ( current_tcp & & current_tcp - > curcol ! = 0 ) {
Report some ptrace failures; nuke tcp->ptrace_errno
Report some (not all) ptrace errors, namely,
errors on ptrace restart operations.
Before: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <unfinished ...>
After: 10533 sendto(-1, 0x804895e, 17, 0, NULL, 0 <ptrace(SYSCALL):No such process>
This tells user that strace failed to let sendto syscall
to be entered - process was dead at that point of time.
It is (marginally) better than to always say "<unfinished ...>"
While at it, patch removes tcp->ptrace_errno.
I added it many months ago, and it looks that after all
it is not needed for ptrace error detection: I failed to execute
a single existing code path which is accessible
through that variable only.
* defs.h: Remove struct tcp::ptrace_errno field.
* strace.c (ptrace_restart): Emit message to log on error.
(printleader): Remove "if (printing_tcp->ptrace_errno)..." code.
(trace): Remove !tcp->ptrace_errno check, it's always true.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-21 13:32:49 +04:00
tprintf ( " <ptrace(%s):%s> \n " , msg , strerror ( err ) ) ;
line_ended ( ) ;
}
if ( err = = ESRCH )
return 0 ;
errno = err ;
2012-03-20 19:26:25 +04:00
perror_msg ( " ptrace(PTRACE_%s,pid:%d,sig:%d) " , msg , tcp - > pid , sig ) ;
return - 1 ;
}
2011-06-22 15:11:23 +04:00
static void
2006-12-14 00:45:31 +03:00
set_cloexec_flag ( int fd )
{
2011-06-22 15:11:23 +04:00
int flags , newflags ;
flags = fcntl ( fd , F_GETFD ) ;
if ( flags < 0 ) {
/* Can happen only if fd is bad.
* Should never happen : if it does , we have a bug
* in the caller . Therefore we just abort
* instead of propagating the error .
*/
perror_msg_and_die ( " fcntl(%d, F_GETFD) " , fd ) ;
2006-12-14 00:45:31 +03:00
}
newflags = flags | FD_CLOEXEC ;
if ( flags = = newflags )
2011-06-22 15:11:23 +04:00
return ;
2006-12-14 00:45:31 +03:00
2011-06-22 15:11:23 +04:00
fcntl ( fd , F_SETFD , newflags ) ; /* never fails */
2006-12-14 00:45:31 +03:00
}
2012-03-09 18:15:24 +04:00
static void kill_save_errno ( pid_t pid , int sig )
{
int saved_errno = errno ;
( void ) kill ( pid , sig ) ;
errno = saved_errno ;
}
2012-03-16 18:11:34 +04:00
/*
* When strace is setuid executable , we have to swap uids
* before and after filesystem and process management operations .
*/
static void
swap_uid ( void )
{
int euid = geteuid ( ) , uid = getuid ( ) ;
if ( euid ! = uid & & setreuid ( euid , uid ) < 0 ) {
perror_msg_and_die ( " setreuid " ) ;
}
}
2013-11-13 02:34:42 +04:00
# ifdef _LARGEFILE64_SOURCE
2014-02-26 04:01:00 +04:00
# ifdef HAVE_FOPEN64
# define fopen_for_output fopen64
# else
# define fopen_for_output fopen
# endif
2013-03-21 01:40:15 +04:00
# define struct_stat struct stat64
# define stat_file stat64
# define struct_dirent struct dirent64
# define read_dir readdir64
# define struct_rlimit struct rlimit64
# define set_rlimit setrlimit64
2012-03-16 18:11:34 +04:00
# else
# define fopen_for_output fopen
2013-03-21 01:40:15 +04:00
# define struct_stat struct stat
# define stat_file stat
# define struct_dirent struct dirent
# define read_dir readdir
# define struct_rlimit struct rlimit
# define set_rlimit setrlimit
2012-03-16 18:11:34 +04:00
# endif
static FILE *
strace_fopen ( const char * path )
{
FILE * fp ;
swap_uid ( ) ;
fp = fopen_for_output ( path , " w " ) ;
if ( ! fp )
perror_msg_and_die ( " Can't fopen '%s' " , path ) ;
swap_uid ( ) ;
set_cloexec_flag ( fileno ( fp ) ) ;
return fp ;
}
static int popen_pid = 0 ;
# ifndef _PATH_BSHELL
# define _PATH_BSHELL " / bin / sh"
# endif
/*
* We cannot use standard popen ( 3 ) here because we have to distinguish
* popen child process from other processes we trace , and standard popen ( 3 )
* does not export its child ' s pid .
*/
static FILE *
strace_popen ( const char * command )
{
FILE * fp ;
2013-07-02 13:31:24 +04:00
int pid ;
2012-03-16 18:11:34 +04:00
int fds [ 2 ] ;
swap_uid ( ) ;
if ( pipe ( fds ) < 0 )
perror_msg_and_die ( " pipe " ) ;
set_cloexec_flag ( fds [ 1 ] ) ; /* never fails */
2013-07-02 13:31:24 +04:00
pid = vfork ( ) ;
if ( pid < 0 )
2012-03-16 18:11:34 +04:00
perror_msg_and_die ( " vfork " ) ;
2013-07-02 13:31:24 +04:00
if ( pid = = 0 ) {
2012-03-16 18:11:34 +04:00
/* child */
close ( fds [ 1 ] ) ;
if ( fds [ 0 ] ! = 0 ) {
if ( dup2 ( fds [ 0 ] , 0 ) )
perror_msg_and_die ( " dup2 " ) ;
close ( fds [ 0 ] ) ;
}
execl ( _PATH_BSHELL , " sh " , " -c " , command , NULL ) ;
perror_msg_and_die ( " Can't execute '%s' " , _PATH_BSHELL ) ;
}
/* parent */
2013-07-02 13:31:24 +04:00
popen_pid = pid ;
2012-03-16 18:11:34 +04:00
close ( fds [ 0 ] ) ;
swap_uid ( ) ;
fp = fdopen ( fds [ 1 ] , " w " ) ;
if ( ! fp )
die_out_of_memory ( ) ;
return fp ;
}
2012-03-13 02:02:26 +04:00
void
tprintf ( const char * fmt , . . . )
{
va_list args ;
va_start ( args , fmt ) ;
2012-03-22 12:56:20 +04:00
if ( current_tcp ) {
2012-04-16 20:22:19 +04:00
int n = strace_vfprintf ( current_tcp - > outf , fmt , args ) ;
2012-03-13 02:02:26 +04:00
if ( n < 0 ) {
2012-03-22 12:56:20 +04:00
if ( current_tcp - > outf ! = stderr )
2012-09-18 03:20:54 +04:00
perror_msg ( " %s " , outfname ) ;
2012-03-13 02:02:26 +04:00
} else
2012-03-22 12:56:20 +04:00
current_tcp - > curcol + = n ;
2012-03-13 02:02:26 +04:00
}
va_end ( args ) ;
}
2014-02-26 04:01:00 +04:00
# ifndef HAVE_FPUTS_UNLOCKED
# define fputs_unlocked fputs
# endif
2012-03-13 02:02:26 +04:00
void
tprints ( const char * str )
{
2012-03-22 12:56:20 +04:00
if ( current_tcp ) {
2012-04-16 20:10:15 +04:00
int n = fputs_unlocked ( str , current_tcp - > outf ) ;
2012-03-13 02:02:26 +04:00
if ( n > = 0 ) {
2012-03-22 12:56:20 +04:00
current_tcp - > curcol + = strlen ( str ) ;
2012-03-13 02:02:26 +04:00
return ;
}
2012-03-22 12:56:20 +04:00
if ( current_tcp - > outf ! = stderr )
2012-09-18 03:20:54 +04:00
perror_msg ( " %s " , outfname ) ;
2012-03-13 02:02:26 +04:00
}
}
2012-03-13 14:44:31 +04:00
void
line_ended ( void )
{
2012-03-22 12:56:20 +04:00
if ( current_tcp ) {
current_tcp - > curcol = 0 ;
fflush ( current_tcp - > outf ) ;
}
if ( printing_tcp ) {
printing_tcp - > curcol = 0 ;
printing_tcp = NULL ;
}
2012-03-13 14:44:31 +04:00
}
2012-03-13 02:02:26 +04:00
void
printleader ( struct tcb * tcp )
{
2012-03-13 14:44:31 +04:00
/* If -ff, "previous tcb we printed" is always the same as current,
* because we have per - tcb output files .
*/
if ( followfork > = 2 )
printing_tcp = tcp ;
2012-03-13 02:02:26 +04:00
if ( printing_tcp ) {
2012-03-22 12:56:20 +04:00
current_tcp = printing_tcp ;
2012-03-13 14:44:31 +04:00
if ( printing_tcp - > curcol ! = 0 & & ( followfork < 2 | | printing_tcp = = tcp ) ) {
/*
* case 1 : we have a shared log ( i . e . not - ff ) , and last line
* wasn ' t finished ( same or different tcb , doesn ' t matter ) .
* case 2 : split log , we are the same tcb , but our last line
* didn ' t finish ( " SIGKILL nuked us after syscall entry " etc ) .
*/
2012-03-13 02:02:26 +04:00
tprints ( " <unfinished ...> \n " ) ;
2012-03-13 14:44:31 +04:00
printing_tcp - > curcol = 0 ;
2012-03-13 02:02:26 +04:00
}
}
printing_tcp = tcp ;
2012-03-22 12:56:20 +04:00
current_tcp = tcp ;
current_tcp - > curcol = 0 ;
2012-03-13 02:02:26 +04:00
if ( print_pid_pfx )
tprintf ( " %-5d " , tcp - > pid ) ;
else if ( nprocs > 1 & & ! outfname )
tprintf ( " [pid %5u] " , tcp - > pid ) ;
if ( tflag ) {
char str [ sizeof ( " HH:MM:SS " ) ] ;
struct timeval tv , dtv ;
static struct timeval otv ;
gettimeofday ( & tv , NULL ) ;
if ( rflag ) {
if ( otv . tv_sec = = 0 )
otv = tv ;
tv_sub ( & dtv , & tv , & otv ) ;
tprintf ( " %6ld.%06ld " ,
( long ) dtv . tv_sec , ( long ) dtv . tv_usec ) ;
otv = tv ;
}
else if ( tflag > 2 ) {
tprintf ( " %ld.%06ld " ,
( long ) tv . tv_sec , ( long ) tv . tv_usec ) ;
}
else {
time_t local = tv . tv_sec ;
strftime ( str , sizeof ( str ) , " %T " , localtime ( & local ) ) ;
if ( tflag > 1 )
tprintf ( " %s.%06ld " , str , ( long ) tv . tv_usec ) ;
else
tprintf ( " %s " , str ) ;
}
}
if ( iflag )
2013-07-01 14:49:14 +04:00
print_pc ( tcp ) ;
2012-03-13 02:02:26 +04:00
}
void
tabto ( void )
{
2012-03-22 12:56:20 +04:00
if ( current_tcp - > curcol < acolumn )
tprints ( acolumn_spaces + current_tcp - > curcol ) ;
2012-03-13 02:02:26 +04:00
}
2012-03-16 18:15:14 +04:00
/* Should be only called directly *after successful attach* to a tracee.
* Otherwise , " strace -oFILE -ff -p<nonexistant_pid> "
* may create bogus empty FILE . < nonexistant_pid > , and then die .
*/
2006-12-14 00:45:31 +03:00
static void
2012-03-16 18:11:34 +04:00
newoutf ( struct tcb * tcp )
2006-12-14 00:45:31 +03:00
{
2012-03-22 12:56:20 +04:00
tcp - > outf = shared_log ; /* if not -ff mode, the same file is for all */
2012-03-16 18:15:14 +04:00
if ( followfork > = 2 ) {
2012-03-16 18:11:34 +04:00
char name [ 520 + sizeof ( int ) * 3 ] ;
sprintf ( name , " %.512s.%u " , outfname , tcp - > pid ) ;
tcp - > outf = strace_fopen ( name ) ;
2006-12-14 00:45:31 +03:00
}
}
2012-03-16 18:11:34 +04:00
static void
expand_tcbtab ( void )
{
/* Allocate some more TCBs and expand the table.
We don ' t want to relocate the TCBs because our
callers have pointers and it would be a pain .
So tcbtab is a table of pointers . Since we never
free the TCBs , we allocate a single chunk of many . */
2014-09-10 17:46:04 +04:00
unsigned int i = tcbtabsize ;
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
struct tcb * newtcbs = xcalloc ( tcbtabsize , sizeof ( newtcbs [ 0 ] ) ) ;
struct tcb * * newtab = xreallocarray ( tcbtab , tcbtabsize * 2 ,
sizeof ( tcbtab [ 0 ] ) ) ;
2012-03-16 18:11:34 +04:00
tcbtabsize * = 2 ;
tcbtab = newtab ;
while ( i < tcbtabsize )
tcbtab [ i + + ] = newtcbs + + ;
}
2007-07-06 00:03:16 +04:00
2012-03-16 18:11:34 +04:00
static struct tcb *
2012-03-16 18:15:14 +04:00
alloctcb ( int pid )
2006-12-14 00:45:31 +03:00
{
2014-09-10 17:46:04 +04:00
unsigned int i ;
2012-03-16 18:11:34 +04:00
struct tcb * tcp ;
2006-12-14 00:45:31 +03:00
2012-03-16 18:11:34 +04:00
if ( nprocs = = tcbtabsize )
expand_tcbtab ( ) ;
for ( i = 0 ; i < tcbtabsize ; i + + ) {
tcp = tcbtab [ i ] ;
2013-06-26 16:14:29 +04:00
if ( ! tcp - > pid ) {
2012-03-16 18:11:34 +04:00
memset ( tcp , 0 , sizeof ( * tcp ) ) ;
tcp - > pid = pid ;
# if SUPPORTED_PERSONALITIES > 1
tcp - > currpers = current_personality ;
# endif
2013-07-23 11:11:35 +04:00
# ifdef USE_LIBUNWIND
if ( stack_trace_enabled )
2014-04-16 10:33:02 +04:00
unwind_tcb_init ( tcp ) ;
2013-07-23 11:11:35 +04:00
# endif
2012-03-16 18:11:34 +04:00
nprocs + + ;
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " new tcb for pid %d, active tcbs:%d " ,
tcp - > pid , nprocs ) ;
2012-03-16 18:11:34 +04:00
return tcp ;
}
}
2012-03-16 18:15:14 +04:00
error_msg_and_die ( " bug in alloctcb " ) ;
2006-12-14 00:45:31 +03:00
}
2012-03-16 18:11:34 +04:00
static void
droptcb ( struct tcb * tcp )
{
if ( tcp - > pid = = 0 )
return ;
2006-12-14 00:45:31 +03:00
2014-04-16 10:33:08 +04:00
# ifdef USE_LIBUNWIND
if ( stack_trace_enabled ) {
unwind_tcb_fin ( tcp ) ;
}
# endif
2012-03-16 18:11:34 +04:00
nprocs - - ;
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " dropped tcb for pid %d, %d remain " ,
tcp - > pid , nprocs ) ;
2006-12-14 00:45:31 +03:00
2012-03-16 18:11:34 +04:00
if ( tcp - > outf ) {
2012-03-22 12:35:51 +04:00
if ( followfork > = 2 ) {
2012-03-16 18:11:34 +04:00
if ( tcp - > curcol ! = 0 )
fprintf ( tcp - > outf , " <detached ...> \n " ) ;
fclose ( tcp - > outf ) ;
} else {
if ( printing_tcp = = tcp & & tcp - > curcol ! = 0 )
fprintf ( tcp - > outf , " <detached ...> \n " ) ;
fflush ( tcp - > outf ) ;
}
}
2012-03-22 12:56:20 +04:00
if ( current_tcp = = tcp )
current_tcp = NULL ;
2012-03-16 18:11:34 +04:00
if ( printing_tcp = = tcp )
printing_tcp = NULL ;
memset ( tcp , 0 , sizeof ( * tcp ) ) ;
}
2013-06-18 20:09:39 +04:00
/* Detach traced process.
2012-03-16 18:11:34 +04:00
* Never call DETACH twice on the same process as both unattached and
* attached - unstopped processes give the same ESRCH . For unattached process we
* would SIGSTOP it and wait for its SIGSTOP notification forever .
2006-12-14 00:45:31 +03:00
*/
2013-06-20 13:20:23 +04:00
static void
2012-03-16 18:11:34 +04:00
detach ( struct tcb * tcp )
2006-12-14 00:45:31 +03:00
{
2012-03-16 18:11:34 +04:00
int error ;
2013-06-21 18:11:10 +04:00
int status ;
2006-12-14 00:45:31 +03:00
2012-03-16 18:11:34 +04:00
/*
* Linux wrongly insists the child be stopped
* before detaching . Arghh . We go through hoops
* to make a clean break of things .
*/
# if defined(SPARC)
2012-09-13 12:28:43 +04:00
# undef PTRACE_DETACH
# define PTRACE_DETACH PTRACE_SUNDETACH
2012-03-16 18:11:34 +04:00
# endif
2006-12-14 00:45:31 +03:00
2013-06-21 18:11:10 +04:00
if ( ! ( tcp - > flags & TCB_ATTACHED ) )
goto drop ;
/* We attached but possibly didn't see the expected SIGSTOP.
* We must catch exactly one as otherwise the detached process
* would be left stopped ( process state T ) .
*/
if ( tcp - > flags & TCB_IGNORE_ONE_SIGSTOP )
goto wait_loop ;
error = ptrace ( PTRACE_DETACH , tcp - > pid , 0 , 0 ) ;
if ( ! error ) {
/* On a clear day, you can see forever. */
goto drop ;
}
if ( errno ! = ESRCH ) {
/* Shouldn't happen. */
perror_msg ( " detach: ptrace(PTRACE_DETACH,%u) " , tcp - > pid ) ;
goto drop ;
}
/* ESRCH: process is either not stopped or doesn't exist. */
if ( my_tkill ( tcp - > pid , 0 ) < 0 ) {
if ( errno ! = ESRCH )
/* Shouldn't happen. */
perror_msg ( " detach: tkill(%u,0) " , tcp - > pid ) ;
/* else: process doesn't exist. */
goto drop ;
}
/* Process is not stopped, need to stop it. */
if ( use_seize ) {
2012-03-16 18:11:34 +04:00
/*
2013-06-21 18:11:10 +04:00
* With SEIZE , tracee can be in group - stop already .
* In this state sending it another SIGSTOP does nothing .
* Need to use INTERRUPT .
* Testcase : trying to ^ C a " strace -p <stopped_process> " .
2012-03-16 18:11:34 +04:00
*/
2013-06-21 18:11:10 +04:00
error = ptrace ( PTRACE_INTERRUPT , tcp - > pid , 0 , 0 ) ;
if ( ! error )
2013-06-21 17:50:41 +04:00
goto wait_loop ;
2013-06-21 18:11:10 +04:00
if ( errno ! = ESRCH )
perror_msg ( " detach: ptrace(PTRACE_INTERRUPT,%u) " , tcp - > pid ) ;
2012-03-16 18:11:34 +04:00
}
2013-06-21 18:11:10 +04:00
else {
error = my_tkill ( tcp - > pid , SIGSTOP ) ;
if ( ! error )
goto wait_loop ;
if ( errno ! = ESRCH )
perror_msg ( " detach: tkill(%u,SIGSTOP) " , tcp - > pid ) ;
}
/* Either process doesn't exist, or some weird error. */
goto drop ;
2006-12-14 00:45:31 +03:00
2013-06-21 17:50:41 +04:00
wait_loop :
2013-06-21 18:11:10 +04:00
/* We end up here in three cases:
* 1. We sent PTRACE_INTERRUPT ( use_seize case )
* 2. We sent SIGSTOP ( ! use_seize )
* 3. Attach SIGSTOP was already pending ( TCB_IGNORE_ONE_SIGSTOP set )
*/
for ( ; ; ) {
2014-09-10 17:46:04 +04:00
unsigned int sig ;
2013-06-21 18:11:10 +04:00
if ( waitpid ( tcp - > pid , & status , __WALL ) < 0 ) {
if ( errno = = EINTR )
continue ;
/*
* if ( errno = = ECHILD ) break ;
* ^ ^ ^ WRONG ! We expect this PID to exist ,
* and want to emit a message otherwise :
*/
perror_msg ( " detach: waitpid(%u) " , tcp - > pid ) ;
break ;
}
if ( ! WIFSTOPPED ( status ) ) {
/*
* Tracee exited or was killed by signal .
* We shouldn ' t normally reach this place :
* we don ' t want to consume exit status .
* Consider " strace -p PID " being ^ C - ed :
* we want merely to detach from PID .
*
* However , we _can_ end up here if tracee
* was SIGKILLed .
*/
break ;
}
sig = WSTOPSIG ( status ) ;
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " detach wait: event:%d sig:%d " ,
( unsigned ) status > > 16 , sig ) ;
2013-06-21 18:11:10 +04:00
if ( use_seize ) {
unsigned event = ( unsigned ) status > > 16 ;
if ( event = = PTRACE_EVENT_STOP /*&& sig == SIGTRAP*/ ) {
2013-06-19 17:31:39 +04:00
/*
2013-06-21 18:11:10 +04:00
* sig = = SIGTRAP : PTRACE_INTERRUPT stop .
* sig = = other : process was already stopped
* with this stopping sig ( see tests / detach - stopped ) .
* Looks like re - injecting this sig is not necessary
* in DETACH for the tracee to remain stopped .
2013-06-19 17:31:39 +04:00
*/
2013-06-21 18:11:10 +04:00
sig = 0 ;
2013-06-19 17:31:39 +04:00
}
2013-06-21 18:11:10 +04:00
/*
* PTRACE_INTERRUPT is not guaranteed to produce
* the above event if other ptrace - stop is pending .
* See tests / detach - sleeping testcase :
* strace got SIGINT while tracee is sleeping .
* We sent PTRACE_INTERRUPT .
* We see syscall exit , not PTRACE_INTERRUPT stop .
* We won ' t get PTRACE_INTERRUPT stop
* if we would CONT now . Need to DETACH .
*/
2013-06-19 17:31:39 +04:00
if ( sig = = syscall_trap_sig )
sig = 0 ;
2013-06-21 18:11:10 +04:00
/* else: not sure in which case we can be here.
* Signal stop ? Inject it while detaching .
*/
ptrace_restart ( PTRACE_DETACH , tcp , sig ) ;
break ;
}
/* Note: this check has to be after use_seize check */
/* (else, in use_seize case SIGSTOP will be mistreated) */
if ( sig = = SIGSTOP ) {
/* Detach, suppressing SIGSTOP */
ptrace_restart ( PTRACE_DETACH , tcp , 0 ) ;
break ;
}
if ( sig = = syscall_trap_sig )
sig = 0 ;
/* Can't detach just yet, may need to wait for SIGSTOP */
error = ptrace_restart ( PTRACE_CONT , tcp , sig ) ;
if ( error < 0 ) {
/* Should not happen.
* Note : ptrace_restart returns 0 on ESRCH , so it ' s not it .
* ptrace_restart already emitted error message .
*/
break ;
2006-12-14 00:45:31 +03:00
}
}
2011-06-22 15:03:56 +04:00
2013-06-21 18:11:10 +04:00
drop :
2012-03-16 18:11:34 +04:00
if ( ! qflag & & ( tcp - > flags & TCB_ATTACHED ) )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " Process %u detached " , tcp - > pid ) ;
2006-12-14 00:45:31 +03:00
2012-03-16 18:11:34 +04:00
droptcb ( tcp ) ;
2006-12-14 00:45:31 +03:00
}
2012-03-13 02:32:16 +04:00
static void
process_opt_p_list ( char * opt )
2012-03-09 16:01:04 +04:00
{
while ( * opt ) {
/*
* We accept - p PID , PID ; - p " `pidof PROG` " ; - p " `pgrep PROG` " .
* pidof uses space as delim , pgrep uses newline . : (
*/
int pid ;
char * delim = opt + strcspn ( opt , " , \n \t " ) ;
char c = * delim ;
* delim = ' \0 ' ;
2012-03-26 01:49:48 +04:00
pid = string_to_uint ( opt ) ;
2012-03-09 16:01:04 +04:00
if ( pid < = 0 ) {
2012-03-26 01:49:48 +04:00
error_msg_and_die ( " Invalid process id: '%s' " , opt ) ;
2012-03-09 16:01:04 +04:00
}
if ( pid = = strace_tracer_pid ) {
2012-03-26 01:49:48 +04:00
error_msg_and_die ( " I'm sorry, I can't let you do that, Dave. " ) ;
2012-03-09 16:01:04 +04:00
}
* delim = c ;
2012-03-16 18:15:14 +04:00
alloctcb ( pid ) ;
2012-03-09 16:01:04 +04:00
if ( c = = ' \0 ' )
break ;
opt = delim + 1 ;
}
}
2007-06-12 02:06:31 +04:00
static void
startup_attach ( void )
{
2016-01-22 17:37:14 +03:00
pid_t parent_pid = strace_tracer_pid ;
2014-09-10 17:46:04 +04:00
unsigned int tcbi ;
2007-06-12 02:06:31 +04:00
struct tcb * tcp ;
/*
* Block user interruptions as we would leave the traced
* process stopped ( process state T ) if we would terminate in
2011-09-01 12:23:09 +04:00
* between PTRACE_ATTACH and wait4 ( ) on SIGSTOP .
2011-06-07 14:13:24 +04:00
* We rely on cleanup ( ) from this point on .
2007-06-12 02:06:31 +04:00
*/
if ( interactive )
sigprocmask ( SIG_BLOCK , & blocked_set , NULL ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
if ( daemonized_tracer ) {
pid_t pid = fork ( ) ;
if ( pid < 0 ) {
2011-09-02 18:19:30 +04:00
perror_msg_and_die ( " fork " ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
}
if ( pid ) { /* parent */
/*
2011-05-27 16:36:01 +04:00
* Wait for grandchild to attach to straced process
* ( grandparent ) . Grandchild SIGKILLs us after it attached .
* Grandparent ' s wait ( ) is unblocked by our death ,
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
* it proceeds to exec the straced program .
*/
pause ( ) ;
_exit ( 0 ) ; /* paranoia */
}
2011-05-27 16:36:01 +04:00
/* grandchild */
/* We will be the tracer process. Remember our new pid: */
strace_tracer_pid = getpid ( ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
}
2007-06-12 02:06:31 +04:00
for ( tcbi = 0 ; tcbi < tcbtabsize ; tcbi + + ) {
tcp = tcbtab [ tcbi ] ;
Remove tcp->parent and TCB_CLONE_THREAD.
tcp->parent is used for only two things:
(1) to send signal on detach via tgkill (need to know tgid).
Solution: use tkill, it needs only tid.
(2) to optimize out ptrace options setting for new tracees.
Not a big deal if we drop this optimization: "set options" op is fast,
doing it just one extra time once per each tracee is hardly measurable.
TCB_CLONE_THREAD is a misnomer. It used only to flag sibling we attached to
in startup_attach. This is used to prevent infinite recursive rescanning
of /proc/PID/task.
Despite the name, there is no guarantee it is set only on non-leader:
if one would run "strace -f -p THREAD_ID" and THREAD_ID is *not*
a thread leader, strace will happily attach to it and all siblings
and will think that THREAD_ID is the leader! Which is a bug, but
since we no longer detach when we think tracee is going to die,
this bug no longer matters, because we do not use the knowledge
about thread group leaders for anything. (We used it to delay
leader's exit).
IOW: after this patch strace has no need to know about threads, parents
and children, and so on. Therefore it does not track that information.
It treats all tracees as independent entities. Overall,
this simplifies code a lot.
* defs.h: Add TCB_ATTACH_DONE flag, remove TCB_CLONE_THREAD flag
and struct tcb::parent field.
* process.c (internal_fork): Don't set tcpchild->parent.
* strace.c (startup_attach): Use TCB_ATTACH_DONE flag instead of
TCB_CLONE_THREAD to avoid attach attempts on already-attached threads.
Unlike TCB_CLONE_THREAD, TCB_ATTACH_DONE bit is used only temporarily,
and only in this function. We clear it on every tcb before we return.
(detach): Use tkill instead of tgkill.
(trace): Set ptrace options on new tracees unconditionally,
not only when tcp->parent == NULL.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2011-08-17 17:18:21 +04:00
2013-06-26 16:14:29 +04:00
if ( ! tcp - > pid )
2012-03-09 18:15:24 +04:00
continue ;
2011-09-05 16:01:33 +04:00
/* Is this a process we should attach to, but not yet attached? */
2012-03-09 18:15:24 +04:00
if ( tcp - > flags & TCB_ATTACHED )
continue ; /* no, we already attached it */
2011-09-05 16:01:33 +04:00
2016-01-22 17:37:14 +03:00
if ( tcp - > pid = = parent_pid | | tcp - > pid = = strace_tracer_pid ) {
errno = EPERM ;
perror_msg ( " attach: %d " , tcp - > pid ) ;
droptcb ( tcp ) ;
continue ;
}
if ( followfork & & tcp - > pid ! = strace_child ) {
2009-01-29 23:38:20 +03:00
char procdir [ sizeof ( " /proc/%d/task " ) + sizeof ( int ) * 3 ] ;
2007-06-12 02:06:31 +04:00
DIR * dir ;
sprintf ( procdir , " /proc/%d/task " , tcp - > pid ) ;
dir = opendir ( procdir ) ;
if ( dir ! = NULL ) {
unsigned int ntid = 0 , nerr = 0 ;
2013-03-21 01:40:15 +04:00
struct_dirent * de ;
2011-09-05 15:59:39 +04:00
2013-03-21 01:40:15 +04:00
while ( ( de = read_dir ( dir ) ) ! = NULL ) {
2011-09-05 15:59:39 +04:00
struct tcb * cur_tcp ;
int tid ;
2009-01-29 23:38:20 +03:00
if ( de - > d_fileno = = 0 )
2007-06-12 02:06:31 +04:00
continue ;
2012-03-26 01:49:48 +04:00
/* we trust /proc filesystem */
2007-06-12 02:06:31 +04:00
tid = atoi ( de - > d_name ) ;
if ( tid < = 0 )
continue ;
+ + ntid ;
2012-01-29 05:01:44 +04:00
if ( ptrace_attach_or_seize ( tid ) < 0 ) {
2007-06-12 02:06:31 +04:00
+ + nerr ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " attach to pid %d failed " , tid ) ;
2011-09-05 15:59:39 +04:00
continue ;
2011-06-24 18:51:16 +04:00
}
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " attach to pid %d succeeded " , tid ) ;
2011-09-05 15:59:39 +04:00
cur_tcp = tcp ;
if ( tid ! = tcp - > pid )
cur_tcp = alloctcb ( tid ) ;
2012-01-29 05:01:44 +04:00
cur_tcp - > flags | = TCB_ATTACHED | TCB_STARTUP | post_attach_sigstop ;
2012-03-16 18:15:14 +04:00
newoutf ( cur_tcp ) ;
2007-06-12 02:06:31 +04:00
}
closedir ( dir ) ;
2011-09-05 15:59:39 +04:00
if ( interactive ) {
sigprocmask ( SIG_SETMASK , & empty_set , NULL ) ;
if ( interrupted )
goto ret ;
sigprocmask ( SIG_BLOCK , & blocked_set , NULL ) ;
}
2009-01-29 23:38:20 +03:00
ntid - = nerr ;
if ( ntid = = 0 ) {
2013-02-26 15:30:09 +04:00
perror_msg ( " attach: ptrace(PTRACE_ATTACH, ...) " ) ;
2007-06-12 02:06:31 +04:00
droptcb ( tcp ) ;
continue ;
}
if ( ! qflag ) {
2015-11-26 04:54:53 +03:00
if ( ntid > 1 )
error_msg ( " Process %u attached "
" with %u threads " ,
tcp - > pid , ntid ) ;
else
error_msg ( " Process %u attached " ,
tcp - > pid ) ;
2007-06-12 02:06:31 +04:00
}
2012-03-09 18:15:24 +04:00
if ( ! ( tcp - > flags & TCB_ATTACHED ) ) {
2011-09-05 16:05:46 +04:00
/* -p PID, we failed to attach to PID itself
* but did attach to some of its sibling threads .
* Drop PID ' s tcp .
*/
droptcb ( tcp ) ;
}
2007-06-12 02:06:31 +04:00
continue ;
2009-01-29 23:38:20 +03:00
} /* if (opendir worked) */
} /* if (-f) */
2012-01-29 05:01:44 +04:00
if ( ptrace_attach_or_seize ( tcp - > pid ) < 0 ) {
2013-02-26 15:30:09 +04:00
perror_msg ( " attach: ptrace(PTRACE_ATTACH, ...) " ) ;
2007-06-12 02:06:31 +04:00
droptcb ( tcp ) ;
continue ;
}
2012-03-09 18:15:24 +04:00
tcp - > flags | = TCB_ATTACHED | TCB_STARTUP | post_attach_sigstop ;
2012-03-16 18:15:14 +04:00
newoutf ( tcp ) ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " attach to pid %d (main) succeeded " , tcp - > pid ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
2007-06-12 02:06:31 +04:00
if ( ! qflag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " Process %u attached " , tcp - > pid ) ;
2011-06-24 18:51:16 +04:00
} /* for each tcbtab[] */
2007-06-12 02:06:31 +04:00
2016-01-22 17:37:14 +03:00
if ( daemonized_tracer ) {
/*
* Make parent go away .
* Also makes grandparent ' s wait ( ) unblock .
*/
kill ( parent_pid , SIGKILL ) ;
strace_child = 0 ;
}
Remove tcp->parent and TCB_CLONE_THREAD.
tcp->parent is used for only two things:
(1) to send signal on detach via tgkill (need to know tgid).
Solution: use tkill, it needs only tid.
(2) to optimize out ptrace options setting for new tracees.
Not a big deal if we drop this optimization: "set options" op is fast,
doing it just one extra time once per each tracee is hardly measurable.
TCB_CLONE_THREAD is a misnomer. It used only to flag sibling we attached to
in startup_attach. This is used to prevent infinite recursive rescanning
of /proc/PID/task.
Despite the name, there is no guarantee it is set only on non-leader:
if one would run "strace -f -p THREAD_ID" and THREAD_ID is *not*
a thread leader, strace will happily attach to it and all siblings
and will think that THREAD_ID is the leader! Which is a bug, but
since we no longer detach when we think tracee is going to die,
this bug no longer matters, because we do not use the knowledge
about thread group leaders for anything. (We used it to delay
leader's exit).
IOW: after this patch strace has no need to know about threads, parents
and children, and so on. Therefore it does not track that information.
It treats all tracees as independent entities. Overall,
this simplifies code a lot.
* defs.h: Add TCB_ATTACH_DONE flag, remove TCB_CLONE_THREAD flag
and struct tcb::parent field.
* process.c (internal_fork): Don't set tcpchild->parent.
* strace.c (startup_attach): Use TCB_ATTACH_DONE flag instead of
TCB_CLONE_THREAD to avoid attach attempts on already-attached threads.
Unlike TCB_CLONE_THREAD, TCB_ATTACH_DONE bit is used only temporarily,
and only in this function. We clear it on every tcb before we return.
(detach): Use tkill instead of tgkill.
(trace): Set ptrace options on new tracees unconditionally,
not only when tcp->parent == NULL.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2011-08-17 17:18:21 +04:00
ret :
2007-06-12 02:06:31 +04:00
if ( interactive )
sigprocmask ( SIG_SETMASK , & empty_set , NULL ) ;
}
2013-02-19 19:30:31 +04:00
/* Stack-o-phobic exec helper, in the hope to work around
* NOMMU + " daemonized tracer " difficulty .
*/
struct exec_params {
int fd_to_close ;
uid_t run_euid ;
gid_t run_egid ;
char * * argv ;
char * pathname ;
} ;
static struct exec_params params_for_tracee ;
Use macros for gcc attributes
* defs.h (error_msg, perror_msg, error_msg_and_die, perror_msg_and_die,
die_out_of_memory, printllval, printnum_int, printnum_long, tprintf):
Use ATTRIBUTE_* macros for gcc attributes.
* file.c (struct stat64): Likewise.
* statfs.c (struct compat_statfs64): Likewise.
* strace.c (die, exec_or_die, init): Likewise.
* linux/sparc/arch_sigreturn.c: Likewise.
* linux/ubi-user.h: Likewise.
2015-03-30 01:45:03 +03:00
static void ATTRIBUTE_NOINLINE ATTRIBUTE_NORETURN
2013-02-19 19:30:31 +04:00
exec_or_die ( void )
{
struct exec_params * params = & params_for_tracee ;
if ( params - > fd_to_close > = 0 )
close ( params - > fd_to_close ) ;
if ( ! daemonized_tracer & & ! use_seize ) {
if ( ptrace ( PTRACE_TRACEME , 0L , 0L , 0L ) < 0 ) {
perror_msg_and_die ( " ptrace(PTRACE_TRACEME, ...) " ) ;
}
}
if ( username ! = NULL ) {
/*
* It is important to set groups before we
* lose privileges on setuid .
*/
if ( initgroups ( username , run_gid ) < 0 ) {
perror_msg_and_die ( " initgroups " ) ;
}
if ( setregid ( run_gid , params - > run_egid ) < 0 ) {
perror_msg_and_die ( " setregid " ) ;
}
if ( setreuid ( run_uid , params - > run_euid ) < 0 ) {
perror_msg_and_die ( " setreuid " ) ;
}
}
else if ( geteuid ( ) ! = 0 )
if ( setreuid ( run_uid , run_uid ) < 0 ) {
perror_msg_and_die ( " setreuid " ) ;
}
if ( ! daemonized_tracer ) {
/*
* Induce a ptrace stop . Tracer ( our parent )
* will resume us with PTRACE_SYSCALL and display
* the immediately following execve syscall .
* Can ' t do this on NOMMU systems , we are after
* vfork : parent is blocked , stopping would deadlock .
*/
if ( ! NOMMU_SYSTEM )
kill ( getpid ( ) , SIGSTOP ) ;
} else {
alarm ( 3 ) ;
/* we depend on SIGCHLD set to SIG_DFL by init code */
/* if it happens to be SIG_IGN'ed, wait won't block */
wait ( NULL ) ;
alarm ( 0 ) ;
}
execv ( params - > pathname , params - > argv ) ;
perror_msg_and_die ( " exec " ) ;
}
2007-06-12 02:06:31 +04:00
static void
2011-05-30 16:00:14 +04:00
startup_child ( char * * argv )
2007-06-12 02:06:31 +04:00
{
2013-03-21 01:40:15 +04:00
struct_stat statbuf ;
2007-06-12 02:06:31 +04:00
const char * filename ;
2015-02-28 17:50:09 +03:00
size_t filename_len ;
2014-11-22 01:28:34 +03:00
char pathname [ PATH_MAX ] ;
2013-02-19 19:30:31 +04:00
int pid ;
2007-06-12 02:06:31 +04:00
struct tcb * tcp ;
filename = argv [ 0 ] ;
2015-02-28 17:50:09 +03:00
filename_len = strlen ( filename ) ;
if ( filename_len > sizeof ( pathname ) - 1 ) {
errno = ENAMETOOLONG ;
perror_msg_and_die ( " exec " ) ;
}
2007-06-12 02:06:31 +04:00
if ( strchr ( filename , ' / ' ) ) {
strcpy ( pathname , filename ) ;
}
# ifdef USE_DEBUGGING_EXEC
/*
* Debuggers customarily check the current directory
* first regardless of the path but doing that gives
* security geeks a panic attack .
*/
2013-03-21 01:40:15 +04:00
else if ( stat_file ( filename , & statbuf ) = = 0 )
2007-06-12 02:06:31 +04:00
strcpy ( pathname , filename ) ;
# endif /* USE_DEBUGGING_EXEC */
else {
2010-09-07 02:08:24 +04:00
const char * path ;
2014-09-10 17:46:04 +04:00
size_t m , n , len ;
2007-06-12 02:06:31 +04:00
for ( path = getenv ( " PATH " ) ; path & & * path ; path + = m ) {
2012-01-30 01:38:35 +04:00
const char * colon = strchr ( path , ' : ' ) ;
if ( colon ) {
n = colon - path ;
2007-06-12 02:06:31 +04:00
m = n + 1 ;
}
else
m = n = strlen ( path ) ;
if ( n = = 0 ) {
2014-11-22 01:28:34 +03:00
if ( ! getcwd ( pathname , PATH_MAX ) )
2007-06-12 02:06:31 +04:00
continue ;
len = strlen ( pathname ) ;
}
else if ( n > sizeof pathname - 1 )
continue ;
else {
strncpy ( pathname , path , n ) ;
len = n ;
}
if ( len & & pathname [ len - 1 ] ! = ' / ' )
pathname [ len + + ] = ' / ' ;
2015-02-28 17:50:09 +03:00
if ( filename_len + len > sizeof ( pathname ) - 1 )
continue ;
2007-06-12 02:06:31 +04:00
strcpy ( pathname + len , filename ) ;
2013-03-21 01:40:15 +04:00
if ( stat_file ( pathname , & statbuf ) = = 0 & &
2007-06-12 02:06:31 +04:00
/* Accept only regular files
with some execute bits set .
XXX not perfect , might still fail */
S_ISREG ( statbuf . st_mode ) & &
( statbuf . st_mode & 0111 ) )
break ;
}
2015-02-28 17:50:09 +03:00
if ( ! path | | ! * path )
pathname [ 0 ] = ' \0 ' ;
2007-06-12 02:06:31 +04:00
}
2013-03-21 01:40:15 +04:00
if ( stat_file ( pathname , & statbuf ) < 0 ) {
2011-06-23 15:05:29 +04:00
perror_msg_and_die ( " Can't stat '%s' " , filename ) ;
2007-06-12 02:06:31 +04:00
}
2013-02-19 19:30:31 +04:00
params_for_tracee . fd_to_close = ( shared_log ! = stderr ) ? fileno ( shared_log ) : - 1 ;
params_for_tracee . run_euid = ( statbuf . st_mode & S_ISUID ) ? statbuf . st_uid : run_uid ;
params_for_tracee . run_egid = ( statbuf . st_mode & S_ISGID ) ? statbuf . st_gid : run_gid ;
params_for_tracee . argv = argv ;
/*
* On NOMMU , can be safely freed only after execve in tracee .
* It ' s hard to know when that happens , so we just leak it .
*/
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
params_for_tracee . pathname = NOMMU_SYSTEM ? xstrdup ( pathname ) : pathname ;
2013-02-19 19:30:31 +04:00
2013-05-13 22:43:28 +04:00
# if defined HAVE_PRCTL && defined PR_SET_PTRACER && defined PR_SET_PTRACER_ANY
if ( daemonized_tracer )
prctl ( PR_SET_PTRACER , PR_SET_PTRACER_ANY ) ;
# endif
2013-06-26 16:27:11 +04:00
pid = fork ( ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
if ( pid < 0 ) {
2011-06-23 15:05:29 +04:00
perror_msg_and_die ( " fork " ) ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
}
2013-02-19 19:30:31 +04:00
if ( ( pid ! = 0 & & daemonized_tracer )
| | ( pid = = 0 & & ! daemonized_tracer )
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
) {
2013-02-19 19:30:31 +04:00
/* We are to become the tracee. Two cases:
* - D : we are parent
* not - D : we are child
*/
exec_or_die ( ) ;
2007-06-12 02:06:31 +04:00
}
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
2011-09-01 12:23:09 +04:00
/* We are the tracer */
2011-05-27 16:36:01 +04:00
2011-09-01 12:23:09 +04:00
if ( ! daemonized_tracer ) {
2013-06-26 16:27:11 +04:00
strace_child = pid ;
2012-01-29 05:01:44 +04:00
if ( ! use_seize ) {
/* child did PTRACE_TRACEME, nothing to do in parent */
} else {
2013-02-19 18:30:12 +04:00
if ( ! NOMMU_SYSTEM ) {
2012-01-29 05:01:44 +04:00
/* Wait until child stopped itself */
int status ;
while ( waitpid ( pid , & status , WSTOPPED ) < 0 ) {
if ( errno = = EINTR )
continue ;
perror_msg_and_die ( " waitpid " ) ;
}
if ( ! WIFSTOPPED ( status ) | | WSTOPSIG ( status ) ! = SIGSTOP ) {
2012-03-09 18:15:24 +04:00
kill_save_errno ( pid , SIGKILL ) ;
2012-01-29 05:01:44 +04:00
perror_msg_and_die ( " Unexpected wait status %x " , status ) ;
}
}
2013-02-19 18:30:12 +04:00
/* Else: NOMMU case, we have no way to sync.
2012-01-29 05:01:44 +04:00
* Just attach to it as soon as possible .
* This means that we may miss a few first syscalls . . .
*/
if ( ptrace_attach_or_seize ( pid ) ) {
2012-03-09 18:15:24 +04:00
kill_save_errno ( pid , SIGKILL ) ;
2012-01-29 05:01:44 +04:00
perror_msg_and_die ( " Can't attach to %d " , pid ) ;
}
2013-02-19 18:30:12 +04:00
if ( ! NOMMU_SYSTEM )
2012-01-29 05:01:44 +04:00
kill ( pid , SIGCONT ) ;
}
2011-09-01 12:23:09 +04:00
tcp = alloctcb ( pid ) ;
2013-02-19 18:30:12 +04:00
if ( ! NOMMU_SYSTEM )
2013-06-26 16:14:29 +04:00
tcp - > flags | = TCB_ATTACHED | TCB_STARTUP | post_attach_sigstop ;
2011-09-05 16:05:46 +04:00
else
2013-06-26 16:14:29 +04:00
tcp - > flags | = TCB_ATTACHED | TCB_STARTUP ;
2012-03-16 18:15:14 +04:00
newoutf ( tcp ) ;
2011-09-01 12:23:09 +04:00
}
else {
2016-01-22 17:37:14 +03:00
/* With -D, we are *child* here, the tracee is our parent. */
strace_child = strace_tracer_pid ;
2011-09-01 12:23:09 +04:00
strace_tracer_pid = getpid ( ) ;
2016-01-22 17:37:14 +03:00
alloctcb ( strace_child ) ;
2012-03-09 18:29:45 +04:00
/* attaching will be done later, by startup_attach */
2012-03-16 18:15:14 +04:00
/* note: we don't do newoutf(tcp) here either! */
2013-02-19 18:30:12 +04:00
2013-02-19 19:30:31 +04:00
/* NOMMU BUG! -D mode is active, we (child) return,
* and we will scribble over parent ' s stack !
* When parent later unpauses , it segfaults .
*
* We work around it
* ( 1 ) by declaring exec_or_die ( ) NORETURN ,
* hopefully compiler will just jump to it
* instead of call ( won ' t push anything to stack ) ,
* ( 2 ) by trying very hard in exec_or_die ( )
* to not use any stack ,
2014-11-22 01:28:34 +03:00
* ( 3 ) having a really big ( PATH_MAX ) stack object
2013-02-19 19:30:31 +04:00
* in this function , which creates a " buffer " between
* child ' s and parent ' s stack pointers .
* This may save us if ( 1 ) and ( 2 ) failed
* and compiler decided to use stack in exec_or_die ( ) anyway
* ( happens on i386 because of stack parameter passing ) .
2013-02-26 15:00:34 +04:00
*
* A cleaner solution is to use makecontext + setcontext
* to create a genuine separate stack and execute on it .
2013-02-19 19:30:31 +04:00
*/
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
}
2007-06-12 02:06:31 +04:00
}
2013-02-19 18:30:12 +04:00
# if USE_SEIZE
2012-01-29 05:01:44 +04:00
static void
test_ptrace_seize ( void )
{
int pid ;
2013-02-26 15:00:34 +04:00
/* Need fork for test. NOMMU has no forks */
2013-02-19 18:30:12 +04:00
if ( NOMMU_SYSTEM ) {
post_attach_sigstop = 0 ; /* this sets use_seize to 1 */
return ;
}
2012-01-29 05:01:44 +04:00
pid = fork ( ) ;
if ( pid < 0 )
perror_msg_and_die ( " fork " ) ;
if ( pid = = 0 ) {
pause ( ) ;
_exit ( 0 ) ;
}
/* PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After
* attaching tracee continues to run unless a trap condition occurs .
* PTRACE_SEIZE doesn ' t affect signal or group stop state .
*/
2012-07-10 18:36:32 +04:00
if ( ptrace ( PTRACE_SEIZE , pid , 0 , 0 ) = = 0 ) {
2012-01-29 05:01:44 +04:00
post_attach_sigstop = 0 ; /* this sets use_seize to 1 */
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
} else if ( debug_flag ) {
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " PTRACE_SEIZE doesn't work " ) ;
2012-01-29 05:01:44 +04:00
}
kill ( pid , SIGKILL ) ;
while ( 1 ) {
int status , tracee_pid ;
errno = 0 ;
tracee_pid = waitpid ( pid , & status , 0 ) ;
if ( tracee_pid < = 0 ) {
if ( errno = = EINTR )
continue ;
perror_msg_and_die ( " %s: unexpected wait result %d " ,
__func__ , tracee_pid ) ;
}
if ( WIFSIGNALED ( status ) ) {
return ;
}
error_msg_and_die ( " %s: unexpected wait status %x " ,
__func__ , status ) ;
}
}
2012-09-13 12:28:43 +04:00
# else /* !USE_SEIZE */
# define test_ptrace_seize() ((void)0)
# endif
2012-01-29 05:01:44 +04:00
2012-03-15 17:36:28 +04:00
static unsigned
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
get_os_release ( void )
{
2012-03-15 17:36:28 +04:00
unsigned rel ;
const char * p ;
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
struct utsname u ;
if ( uname ( & u ) < 0 )
perror_msg_and_die ( " uname " ) ;
2012-03-15 17:36:28 +04:00
/* u.release has this form: "3.2.9[-some-garbage]" */
rel = 0 ;
p = u . release ;
for ( ; ; ) {
if ( ! ( * p > = ' 0 ' & & * p < = ' 9 ' ) )
error_msg_and_die ( " Bad OS release string: '%s' " , u . release ) ;
/* Note: this open-codes KERNEL_VERSION(): */
rel = ( rel < < 8 ) | atoi ( p ) ;
if ( rel > = KERNEL_VERSION ( 1 , 0 , 0 ) )
break ;
while ( * p > = ' 0 ' & & * p < = ' 9 ' )
p + + ;
2012-05-15 03:42:10 +04:00
if ( * p ! = ' . ' ) {
if ( rel > = KERNEL_VERSION ( 0 , 1 , 0 ) ) {
/* "X.Y-something" means "X.Y.0" */
rel < < = 8 ;
break ;
}
2012-03-15 17:36:28 +04:00
error_msg_and_die ( " Bad OS release string: '%s' " , u . release ) ;
2012-05-15 03:42:10 +04:00
}
2012-03-15 17:36:28 +04:00
p + + ;
}
return rel ;
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
}
2012-03-13 02:05:25 +04:00
/*
* Initialization part of main ( ) was eating much stack ( ~ 0.5 k ) ,
* which was unused after init .
* We can reuse it if we move init code into a separate function .
*
* Don ' t want main ( ) to inline us and defeat the reason
* we have a separate function .
*/
Use macros for gcc attributes
* defs.h (error_msg, perror_msg, error_msg_and_die, perror_msg_and_die,
die_out_of_memory, printllval, printnum_int, printnum_long, tprintf):
Use ATTRIBUTE_* macros for gcc attributes.
* file.c (struct stat64): Likewise.
* statfs.c (struct compat_statfs64): Likewise.
* strace.c (die, exec_or_die, init): Likewise.
* linux/sparc/arch_sigreturn.c: Likewise.
* linux/ubi-user.h: Likewise.
2015-03-30 01:45:03 +03:00
static void ATTRIBUTE_NOINLINE
2012-03-13 02:05:25 +04:00
init ( int argc , char * argv [ ] )
1999-02-19 03:21:36 +03:00
{
struct tcb * tcp ;
2012-03-26 01:49:48 +04:00
int c , i ;
2008-07-25 19:42:34 +04:00
int optF = 0 ;
2014-09-10 17:46:04 +04:00
unsigned int tcbi ;
1999-02-19 03:21:36 +03:00
struct sigaction sa ;
2007-10-09 01:04:41 +04:00
progname = argv [ 0 ] ? argv [ 0 ] : " strace " ;
2012-03-15 20:27:49 +04:00
/* Make sure SIGCHLD has the default action so that waitpid
definitely works without losing track of children . The user
should not have given us a bogus state to inherit , but he might
have . Arguably we should detect SIG_IGN here and pass it on
to children , but probably noone really needs that . */
signal ( SIGCHLD , SIG_DFL ) ;
2011-05-27 16:36:01 +04:00
strace_tracer_pid = getpid ( ) ;
2012-03-15 17:36:28 +04:00
os_release = get_os_release ( ) ;
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2002-12-18 07:16:10 +03:00
/* Allocate the initial tcbtab. */
tcbtabsize = argc ; /* Surely enough for all -p args. */
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
tcbtab = xcalloc ( tcbtabsize , sizeof ( tcbtab [ 0 ] ) ) ;
tcp = xcalloc ( tcbtabsize , sizeof ( * tcp ) ) ;
2014-09-10 17:46:04 +04:00
for ( tcbi = 0 ; tcbi < tcbtabsize ; tcbi + + )
tcbtab [ tcbi ] = tcp + + ;
2002-12-18 07:16:10 +03:00
2012-03-22 12:56:20 +04:00
shared_log = stderr ;
2006-01-12 12:50:49 +03:00
set_sortby ( DEFAULT_SORTBY ) ;
set_personality ( DEFAULT_PERSONALITY ) ;
1999-02-19 03:21:36 +03:00
qualify ( " trace=all " ) ;
qualify ( " abbrev=all " ) ;
qualify ( " verbose=all " ) ;
2013-02-21 19:13:47 +04:00
# if DEFAULT_QUAL_FLAGS != (QUAL_TRACE | QUAL_ABBREV | QUAL_VERBOSE)
# error Bug in DEFAULT_QUAL_FLAGS
# endif
1999-02-19 03:21:36 +03:00
qualify ( " signal=all " ) ;
while ( ( c = getopt ( argc , argv ,
2014-05-28 20:52:40 +04:00
" +b:cCdfFhiqrtTvVwxyz "
2013-07-23 11:11:35 +04:00
# ifdef USE_LIBUNWIND
" k "
# endif
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
" D "
2012-01-29 19:53:03 +04:00
" a:e:o:O:p:s:S:u:E:P:I: " ) ) ! = EOF ) {
1999-02-19 03:21:36 +03:00
switch ( c ) {
2012-03-15 16:44:17 +04:00
case ' b ' :
2013-02-27 15:15:19 +04:00
if ( strcmp ( optarg , " execve " ) ! = 0 )
error_msg_and_die ( " Syscall '%s' for -b isn't supported " ,
optarg ) ;
2012-03-15 16:44:17 +04:00
detach_on_execve = 1 ;
break ;
1999-02-19 03:21:36 +03:00
case ' c ' :
2010-03-28 23:24:54 +04:00
if ( cflag = = CFLAG_BOTH ) {
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " -c and -C are mutually exclusive " ) ;
2010-03-28 23:24:54 +04:00
}
cflag = CFLAG_ONLY_STATS ;
break ;
case ' C ' :
if ( cflag = = CFLAG_ONLY_STATS ) {
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " -c and -C are mutually exclusive " ) ;
2010-03-28 23:24:54 +04:00
}
cflag = CFLAG_BOTH ;
1999-02-19 03:21:36 +03:00
break ;
case ' d ' :
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
debug_flag = 1 ;
1999-02-19 03:21:36 +03:00
break ;
Experimental support for -D option.
Unlike normal case, with -D *grandparent* process exec's,
becoming a traced process. Child exits (this prevents traced process
from having children it doesn't expect to have), and grandchild
attaches to grandparent similarly to strace -p PID.
This allows for more transparent interaction in cases
when process and its parent are communicating via signals,
wait() etc. Without -D, strace process gets lodged in between,
disrupting parent<->child link.
* strace.c: Add global flag variable daemonized_tracer for -D option.
(startup_attach): If -D, fork and block parent in pause().
In this case we are already a child, we in fact created a grandchild.
After attaching to grandparent, grandchild SIGKILLs parent.
(startup_child): If -D, parent blocks in wait(), then
execs the program to strace. Normally (w/o -D), it is child
who execs the program.
(main): Detect -D option, call startup_attach() if it is given.
2008-12-30 23:51:30 +03:00
case ' D ' :
daemonized_tracer = 1 ;
break ;
2008-07-18 04:25:10 +04:00
case ' F ' :
2008-07-25 19:42:34 +04:00
optF = 1 ;
break ;
1999-02-19 03:21:36 +03:00
case ' f ' :
followfork + + ;
break ;
case ' h ' :
2015-11-26 17:18:00 +03:00
usage ( ) ;
1999-02-19 03:21:36 +03:00
break ;
case ' i ' :
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
iflag = 1 ;
1999-02-19 03:21:36 +03:00
break ;
case ' q ' :
2013-05-13 14:30:55 +04:00
qflag + + ;
1999-02-19 03:21:36 +03:00
break ;
case ' r ' :
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
rflag = 1 ;
/* fall through to tflag++ */
1999-02-19 03:21:36 +03:00
case ' t ' :
tflag + + ;
break ;
case ' T ' :
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
Tflag = 1 ;
1999-02-19 03:21:36 +03:00
break ;
2014-05-28 20:52:40 +04:00
case ' w ' :
count_wallclock = 1 ;
break ;
1999-02-19 03:21:36 +03:00
case ' x ' :
xflag + + ;
break ;
2011-04-08 00:25:40 +04:00
case ' y ' :
2014-08-09 03:38:26 +04:00
show_fd_path + + ;
2011-04-08 00:25:40 +04:00
break ;
1999-02-19 03:21:36 +03:00
case ' v ' :
qualify ( " abbrev=none " ) ;
break ;
case ' V ' :
2003-02-20 05:56:29 +03:00
printf ( " %s -- version %s \n " , PACKAGE_NAME , VERSION ) ;
1999-02-19 03:21:36 +03:00
exit ( 0 ) ;
break ;
2002-11-06 16:17:21 +03:00
case ' z ' :
not_failing_only = 1 ;
break ;
1999-02-19 03:21:36 +03:00
case ' a ' :
2012-03-26 01:49:48 +04:00
acolumn = string_to_uint ( optarg ) ;
2011-08-25 03:27:59 +04:00
if ( acolumn < 0 )
2012-03-26 01:49:48 +04:00
error_opt_arg ( c , optarg ) ;
1999-02-19 03:21:36 +03:00
break ;
case ' e ' :
qualify ( optarg ) ;
break ;
case ' o ' :
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
outfname = xstrdup ( optarg ) ;
1999-02-19 03:21:36 +03:00
break ;
case ' O ' :
2012-03-26 01:49:48 +04:00
i = string_to_uint ( optarg ) ;
if ( i < 0 )
error_opt_arg ( c , optarg ) ;
set_overhead ( i ) ;
1999-02-19 03:21:36 +03:00
break ;
case ' p ' :
2012-03-09 16:01:04 +04:00
process_opt_p_list ( optarg ) ;
1999-02-19 03:21:36 +03:00
break ;
2011-04-08 00:25:40 +04:00
case ' P ' :
2013-03-05 18:46:34 +04:00
pathtrace_select ( optarg ) ;
2011-04-08 00:25:40 +04:00
break ;
1999-02-19 03:21:36 +03:00
case ' s ' :
2012-03-26 01:49:48 +04:00
i = string_to_uint ( optarg ) ;
if ( i < 0 )
error_opt_arg ( c , optarg ) ;
max_strlen = i ;
1999-02-19 03:21:36 +03:00
break ;
case ' S ' :
set_sortby ( optarg ) ;
break ;
case ' u ' :
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
username = xstrdup ( optarg ) ;
1999-02-19 03:21:36 +03:00
break ;
2013-07-23 11:11:35 +04:00
# ifdef USE_LIBUNWIND
case ' k ' :
stack_trace_enabled = true ;
break ;
# endif
2003-01-24 07:31:23 +03:00
case ' E ' :
2011-08-31 16:00:02 +04:00
if ( putenv ( optarg ) < 0 )
die_out_of_memory ( ) ;
2003-01-24 07:31:23 +03:00
break ;
2012-01-29 19:53:03 +04:00
case ' I ' :
2012-03-26 01:49:48 +04:00
opt_intr = string_to_uint ( optarg ) ;
if ( opt_intr < = 0 | | opt_intr > = NUM_INTR_OPTS )
error_opt_arg ( c , optarg ) ;
2012-01-29 19:53:03 +04:00
break ;
1999-02-19 03:21:36 +03:00
default :
2015-11-26 17:18:00 +03:00
error_msg_and_help ( NULL ) ;
1999-02-19 03:21:36 +03:00
break ;
}
}
2012-01-24 14:37:03 +04:00
argv + = optind ;
/* argc -= optind; - no need, argc is not used below */
1999-02-19 03:21:36 +03:00
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
acolumn_spaces = xmalloc ( acolumn + 1 ) ;
2011-08-25 03:27:59 +04:00
memset ( acolumn_spaces , ' ' , acolumn ) ;
acolumn_spaces [ acolumn ] = ' \0 ' ;
2016-01-22 17:37:14 +03:00
if ( ! argv [ 0 ] & & ! nprocs ) {
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " must have PROG [ARGS] or -p PID " ) ;
}
2003-11-12 00:24:23 +03:00
2016-01-22 17:37:14 +03:00
if ( ! argv [ 0 ] & & daemonized_tracer ) {
error_msg_and_help ( " PROG [ARGS] must be specified with -D " ) ;
2010-08-05 10:30:11 +04:00
}
2008-07-25 19:42:34 +04:00
if ( ! followfork )
followfork = optF ;
2012-03-16 18:15:14 +04:00
if ( followfork > = 2 & & cflag ) {
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " (-c or -C) and -ff are mutually exclusive " ) ;
2006-04-25 11:48:03 +04:00
}
2014-05-28 20:52:40 +04:00
if ( count_wallclock & & ! cflag ) {
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " -w must be given with (-c or -C) " ) ;
2014-05-28 20:52:40 +04:00
}
2014-06-03 17:20:05 +04:00
if ( cflag = = CFLAG_ONLY_STATS ) {
if ( iflag )
error_msg ( " -%c has no effect with -c " , ' i ' ) ;
# ifdef USE_LIBUNWIND
if ( stack_trace_enabled )
error_msg ( " -%c has no effect with -c " , ' k ' ) ;
# endif
if ( rflag )
error_msg ( " -%c has no effect with -c " , ' r ' ) ;
if ( tflag )
error_msg ( " -%c has no effect with -c " , ' t ' ) ;
if ( Tflag )
error_msg ( " -%c has no effect with -c " , ' T ' ) ;
if ( show_fd_path )
error_msg ( " -%c has no effect with -c " , ' y ' ) ;
}
# ifdef USE_LIBUNWIND
if ( stack_trace_enabled )
unwind_init ( ) ;
# endif
1999-02-19 03:21:36 +03:00
/* See if they want to run as another user. */
if ( username ! = NULL ) {
struct passwd * pent ;
if ( getuid ( ) ! = 0 | | geteuid ( ) ! = 0 ) {
2011-06-23 15:05:29 +04:00
error_msg_and_die ( " You must be root to use the -u option " ) ;
1999-02-19 03:21:36 +03:00
}
2011-08-20 14:48:18 +04:00
pent = getpwnam ( username ) ;
if ( pent = = NULL ) {
2011-06-23 15:05:29 +04:00
error_msg_and_die ( " Cannot find user '%s' " , username ) ;
1999-02-19 03:21:36 +03:00
}
run_uid = pent - > pw_uid ;
run_gid = pent - > pw_gid ;
}
else {
run_uid = getuid ( ) ;
run_gid = getgid ( ) ;
}
2011-08-16 22:57:29 +04:00
if ( followfork )
Remove support for systems without PTRACE_SETOPTIONS
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
2015-02-08 16:05:53 +03:00
ptrace_setoptions | = PTRACE_O_TRACECLONE |
PTRACE_O_TRACEFORK |
PTRACE_O_TRACEVFORK ;
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " ptrace_setoptions = %#x " , ptrace_setoptions ) ;
2012-01-29 05:01:44 +04:00
test_ptrace_seize ( ) ;
2010-12-07 15:50:49 +03:00
1999-02-19 03:21:36 +03:00
/* Check if they want to redirect the output. */
if ( outfname ) {
2003-11-07 05:26:54 +03:00
/* See if they want to pipe the output. */
if ( outfname [ 0 ] = = ' | ' | | outfname [ 0 ] = = ' ! ' ) {
/*
* We can ' t do the < outfname > . PID funny business
* when using popen , so prohibit it .
*/
2012-03-16 18:15:14 +04:00
if ( followfork > = 2 )
2015-11-26 17:18:00 +03:00
error_msg_and_help ( " piping the output and -ff are mutually exclusive " ) ;
2012-03-22 12:56:20 +04:00
shared_log = strace_popen ( outfname + 1 ) ;
2001-08-03 15:43:35 +04:00
}
2012-03-16 18:15:14 +04:00
else if ( followfork < 2 )
2012-03-22 12:56:20 +04:00
shared_log = strace_fopen ( outfname ) ;
2012-03-13 02:34:13 +04:00
} else {
/* -ff without -o FILE is the same as single -f */
2012-03-16 18:15:14 +04:00
if ( followfork > = 2 )
2012-03-13 02:34:13 +04:00
followfork = 1 ;
1999-02-19 03:21:36 +03:00
}
2011-06-23 15:05:29 +04:00
if ( ! outfname | | outfname [ 0 ] = = ' | ' | | outfname [ 0 ] = = ' ! ' ) {
Introduce memory allocation wrappers
Introduce wrappers to the following functions that do memory allocation:
malloc, calloc, realloc, strdup.
This commit is a follow-up to the related discussions in strace-devel ML:
http://sourceforge.net/p/strace/mailman/message/33618180/
http://sourceforge.net/p/strace/mailman/message/33733470/
* defs.h (xmalloc, xcalloc, xreallocarray, xstrdup): New prototypes.
* xmalloc.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* count.c (count_syscall, call_summary_pers): Use xcalloc.
* desc.c (decode_select): Use xmalloc.
* dirent.c (sys_getdents, sys_getdents64): Likewise.
* net.c (sys_recvmmsg): Use xstrdup.
* pathtrace.c (storepath): Use xreallocarray.
(pathtrace_match): Use xmalloc.
* strace.c (die_out_of_memory): Move to xmalloc.c.
(expand_tcbtab): Use xcalloc and xreallocarray.
(startup_child): Use xstrdup.
(init): Use xmalloc, xcalloc, and xstrdup.
* syscall.c (reallocate_qual): Use xreallocarray.
(qualify): Use xstrdup.
* unwind.c (unwind_tcb_init): Use xmalloc.
(build_mmap_cache): Use xcalloc, xreallocarray, and xstrdup.
(get_symbol_name): Use xreallocarray.
(stacktrace_walk, queue_put): Use xmalloc.
* util.c (printstr): Use xmalloc.
* vsprintf.c (strace_vfprintf): Likewise.
2015-05-25 23:41:02 +03:00
char * buf = xmalloc ( BUFSIZ ) ;
2012-03-22 12:56:20 +04:00
setvbuf ( shared_log , buf , _IOLBF , BUFSIZ ) ;
2011-06-23 15:05:29 +04:00
}
2012-01-24 14:37:03 +04:00
if ( outfname & & argv [ 0 ] ) {
2012-01-29 19:53:03 +04:00
if ( ! opt_intr )
opt_intr = INTR_NEVER ;
2015-06-29 17:37:26 +03:00
if ( ! qflag )
qflag = 1 ;
2003-06-03 05:35:20 +04:00
}
2012-01-29 19:53:03 +04:00
if ( ! opt_intr )
opt_intr = INTR_WHILE_WAIT ;
/* argv[0] -pPID -oFILE Default interactive setting
2016-01-22 17:37:14 +03:00
* yes * 0 INTR_WHILE_WAIT
2012-01-29 19:53:03 +04:00
* no 1 0 INTR_WHILE_WAIT
2016-01-22 17:37:14 +03:00
* yes * 1 INTR_NEVER
2012-01-29 19:53:03 +04:00
* no 1 1 INTR_WHILE_WAIT
2007-11-04 02:34:11 +03:00
*/
2013-02-19 18:30:12 +04:00
sigemptyset ( & empty_set ) ;
sigemptyset ( & blocked_set ) ;
2013-02-19 19:30:31 +04:00
/* startup_child() must be called before the signal handlers get
* installed below as they are inherited into the spawned process .
* Also we do not need to be protected by them as during interruption
* in the startup_child ( ) mode we kill the spawned process anyway .
*/
2012-03-15 16:44:17 +04:00
if ( argv [ 0 ] ) {
2013-05-15 02:35:46 +04:00
if ( ! NOMMU_SYSTEM | | daemonized_tracer )
hide_log_until_execve = 1 ;
2013-05-14 18:07:46 +04:00
skip_one_b_execve = 1 ;
2012-01-24 14:37:03 +04:00
startup_child ( argv ) ;
2012-03-15 16:44:17 +04:00
}
1999-02-19 03:21:36 +03:00
sa . sa_handler = SIG_IGN ;
sigemptyset ( & sa . sa_mask ) ;
sa . sa_flags = 0 ;
2012-01-29 19:53:03 +04:00
sigaction ( SIGTTOU , & sa , NULL ) ; /* SIG_IGN */
sigaction ( SIGTTIN , & sa , NULL ) ; /* SIG_IGN */
if ( opt_intr ! = INTR_ANYWHERE ) {
if ( opt_intr = = INTR_BLOCK_TSTP_TOO )
sigaction ( SIGTSTP , & sa , NULL ) ; /* SIG_IGN */
/*
* In interactive mode ( if no - o OUTFILE , or - p PID is used ) ,
* fatal signals are blocked while syscall stop is processed ,
* and acted on in between , when waiting for new syscall stops .
* In non - interactive mode , signals are ignored .
*/
if ( opt_intr = = INTR_WHILE_WAIT ) {
sigaddset ( & blocked_set , SIGHUP ) ;
sigaddset ( & blocked_set , SIGINT ) ;
sigaddset ( & blocked_set , SIGQUIT ) ;
sigaddset ( & blocked_set , SIGPIPE ) ;
sigaddset ( & blocked_set , SIGTERM ) ;
sa . sa_handler = interrupt ;
}
/* SIG_IGN, or set handler for these */
sigaction ( SIGHUP , & sa , NULL ) ;
sigaction ( SIGINT , & sa , NULL ) ;
sigaction ( SIGQUIT , & sa , NULL ) ;
sigaction ( SIGPIPE , & sa , NULL ) ;
sigaction ( SIGTERM , & sa , NULL ) ;
1999-02-19 03:21:36 +03:00
}
2012-03-09 16:03:41 +04:00
if ( nprocs ! = 0 | | daemonized_tracer )
2007-06-12 02:06:31 +04:00
startup_attach ( ) ;
2012-03-09 16:03:41 +04:00
/* Do we want pids printed in our -o OUTFILE?
* - ff : no ( every pid has its own file ) ; or
* - f : yes ( there can be more pids in the future ) ; or
* - p PID1 , PID2 : yes ( there are already more than one pid )
*/
print_pid_pfx = ( outfname & & followfork < 2 & & ( followfork = = 1 | | nprocs > 1 ) ) ;
1999-02-19 03:21:36 +03:00
}
2012-01-27 18:24:48 +04:00
static struct tcb *
2010-09-15 05:59:20 +04:00
pid2tcb ( int pid )
1999-02-19 03:21:36 +03:00
{
2014-09-10 17:46:04 +04:00
unsigned int i ;
2010-09-15 05:59:20 +04:00
if ( pid < = 0 )
return NULL ;
1999-02-19 03:21:36 +03:00
2002-12-18 07:16:10 +03:00
for ( i = 0 ; i < tcbtabsize ; i + + ) {
2010-09-15 05:59:20 +04:00
struct tcb * tcp = tcbtab [ i ] ;
2013-06-26 16:14:29 +04:00
if ( tcp - > pid = = pid )
1999-02-19 03:21:36 +03:00
return tcp ;
}
2010-09-15 05:59:20 +04:00
1999-02-19 03:21:36 +03:00
return NULL ;
}
static void
2011-05-30 16:00:14 +04:00
cleanup ( void )
1999-02-19 03:21:36 +03:00
{
2014-09-10 17:46:04 +04:00
unsigned int i ;
1999-02-19 03:21:36 +03:00
struct tcb * tcp ;
2012-01-30 00:17:56 +04:00
int fatal_sig ;
/* 'interrupted' is a volatile object, fetch it only once */
fatal_sig = interrupted ;
if ( ! fatal_sig )
fatal_sig = SIGTERM ;
1999-02-19 03:21:36 +03:00
2002-12-18 07:16:10 +03:00
for ( i = 0 ; i < tcbtabsize ; i + + ) {
tcp = tcbtab [ i ] ;
2013-06-26 16:14:29 +04:00
if ( ! tcp - > pid )
1999-02-19 03:21:36 +03:00
continue ;
Tidy up order of includes; make bool variables explicit.
Bool variables are more compact in data and (on x86) on code too:
text data bss dec hex filename
237950 676 19044 257670 3ee86 strace.before
237838 676 19012 257526 3edf6 strace
* defs.h: Group library includes at the top of the file.
Rename dtime to Tflag, debug to debug_flag.
Change debug_flag,Tflag,qflag,not_failing_only,show_fd_path,tracing_paths
variable declarations from int to bool.
* strace.c: Change corresponding definitions. Do the same for static
variables iflag,rflag,print_pid_pfx.
Rename dtime to Tflag, debug to debug_flag.
* syscall.c: Rename dtime to Tflag, debug to debug_flag.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-03-15 15:49:52 +04:00
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " cleanup: looking at pid %u " , tcp - > pid ) ;
2013-06-26 16:14:29 +04:00
if ( tcp - > pid = = strace_child ) {
1999-02-19 03:21:36 +03:00
kill ( tcp - > pid , SIGCONT ) ;
2012-01-29 19:43:51 +04:00
kill ( tcp - > pid , fatal_sig ) ;
1999-02-19 03:21:36 +03:00
}
2012-03-13 14:44:31 +04:00
detach ( tcp ) ;
1999-02-19 03:21:36 +03:00
}
if ( cflag )
2012-03-22 12:56:20 +04:00
call_summary ( shared_log ) ;
1999-02-19 03:21:36 +03:00
}
static void
2011-05-30 16:00:14 +04:00
interrupt ( int sig )
1999-02-19 03:21:36 +03:00
{
2012-01-29 19:43:51 +04:00
interrupted = sig ;
1999-02-19 03:21:36 +03:00
}
2013-07-01 15:02:33 +04:00
static void
2015-02-22 05:13:04 +03:00
print_debug_info ( const int pid , int status )
1999-02-19 03:21:36 +03:00
{
2015-02-07 20:31:54 +03:00
const unsigned int event = ( unsigned int ) status > > 16 ;
char buf [ sizeof ( " WIFEXITED,exitcode=%u " ) + sizeof ( int ) * 3 /*paranoia:*/ + 16 ] ;
char evbuf [ sizeof ( " ,EVENT_VFORK_DONE (%u) " ) + sizeof ( int ) * 3 /*paranoia:*/ + 16 ] ;
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2015-02-07 20:31:54 +03:00
strcpy ( buf , " ??? " ) ;
if ( WIFSIGNALED ( status ) )
# ifdef WCOREDUMP
sprintf ( buf , " WIFSIGNALED,%ssig=%s " ,
WCOREDUMP ( status ) ? " core, " : " " ,
signame ( WTERMSIG ( status ) ) ) ;
# else
sprintf ( buf , " WIFSIGNALED,sig=%s " ,
signame ( WTERMSIG ( status ) ) ) ;
# endif
if ( WIFEXITED ( status ) )
sprintf ( buf , " WIFEXITED,exitcode=%u " , WEXITSTATUS ( status ) ) ;
if ( WIFSTOPPED ( status ) )
sprintf ( buf , " WIFSTOPPED,sig=%s " , signame ( WSTOPSIG ( status ) ) ) ;
# ifdef WIFCONTINUED
/* Should never be seen */
if ( WIFCONTINUED ( status ) )
strcpy ( buf , " WIFCONTINUED " ) ;
# endif
evbuf [ 0 ] = ' \0 ' ;
if ( event ! = 0 ) {
static const char * const event_names [ ] = {
[ PTRACE_EVENT_CLONE ] = " CLONE " ,
[ PTRACE_EVENT_FORK ] = " FORK " ,
[ PTRACE_EVENT_VFORK ] = " VFORK " ,
[ PTRACE_EVENT_VFORK_DONE ] = " VFORK_DONE " ,
[ PTRACE_EVENT_EXEC ] = " EXEC " ,
[ PTRACE_EVENT_EXIT ] = " EXIT " ,
/* [PTRACE_EVENT_STOP (=128)] would make biggish array */
} ;
const char * e = " ?? " ;
if ( event < ARRAY_SIZE ( event_names ) )
e = event_names [ event ] ;
else if ( event = = PTRACE_EVENT_STOP )
e = " STOP " ;
sprintf ( evbuf , " ,EVENT_%s (%u) " , e , event ) ;
}
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " [wait(0x%06x) = %u] %s%s " , status , pid , buf , evbuf ) ;
2015-02-07 20:31:54 +03:00
}
2013-06-20 13:06:58 +04:00
2015-02-07 20:31:54 +03:00
static struct tcb *
2015-02-22 05:13:04 +03:00
maybe_allocate_tcb ( const int pid , int status )
2015-02-07 20:31:54 +03:00
{
if ( ! WIFSTOPPED ( status ) ) {
2015-02-07 21:48:55 +03:00
if ( detach_on_execve & & pid = = strace_child ) {
/* example: strace -bexecve sh -c 'exec true' */
strace_child = 0 ;
return NULL ;
}
2015-02-07 20:31:54 +03:00
/*
* This can happen if we inherited an unknown child .
2015-02-07 21:48:55 +03:00
* Example : ( sleep 1 & exec strace true )
2015-02-07 20:31:54 +03:00
*/
error_msg ( " Exit of unknown pid %u ignored " , pid ) ;
return NULL ;
}
if ( followfork ) {
/* We assume it's a fork/vfork/clone child */
struct tcb * tcp = alloctcb ( pid ) ;
tcp - > flags | = TCB_ATTACHED | TCB_STARTUP | post_attach_sigstop ;
newoutf ( tcp ) ;
if ( ! qflag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " Process %d attached " , pid ) ;
2015-02-07 20:31:54 +03:00
return tcp ;
} else {
/* This can happen if a clone call used
* CLONE_PTRACE itself .
*/
ptrace ( PTRACE_CONT , pid , ( char * ) 0 , 0 ) ;
error_msg ( " Stop of unknown pid %u seen, PTRACE_CONTed it " , pid ) ;
return NULL ;
}
}
2013-07-08 15:55:04 +04:00
2015-02-07 20:31:54 +03:00
static struct tcb *
maybe_switch_tcbs ( struct tcb * tcp , const int pid )
{
FILE * fp ;
struct tcb * execve_thread ;
long old_pid = 0 ;
if ( ptrace ( PTRACE_GETEVENTMSG , pid , NULL , ( long ) & old_pid ) < 0 )
return tcp ;
/* Avoid truncation in pid2tcb() param passing */
if ( old_pid < = 0 | | old_pid = = pid )
return tcp ;
if ( ( unsigned long ) old_pid > UINT_MAX )
return tcp ;
execve_thread = pid2tcb ( old_pid ) ;
/* It should be !NULL, but I feel paranoid */
if ( ! execve_thread )
return tcp ;
if ( execve_thread - > curcol ! = 0 ) {
/*
* One case we are here is - ff :
* try " strace -oLOG -ff test/threaded_execve "
*/
fprintf ( execve_thread - > outf , " <pid changed to %d ...> \n " , pid ) ;
/*execve_thread->curcol = 0; - no need, see code below */
}
/* Swap output FILEs (needed for -ff) */
fp = execve_thread - > outf ;
execve_thread - > outf = tcp - > outf ;
tcp - > outf = fp ;
/* And their column positions */
execve_thread - > curcol = tcp - > curcol ;
tcp - > curcol = 0 ;
/* Drop leader, but close execve'd thread outfile (if -ff) */
droptcb ( tcp ) ;
/* Switch to the thread, reusing leader's outfile and pid */
tcp = execve_thread ;
tcp - > pid = pid ;
if ( cflag ! = CFLAG_ONLY_STATS ) {
printleader ( tcp ) ;
tprintf ( " +++ superseded by execve in pid %lu +++ \n " , old_pid ) ;
line_ended ( ) ;
tcp - > flags | = TCB_REPRINT ;
}
1999-02-19 03:21:36 +03:00
2015-02-07 20:31:54 +03:00
return tcp ;
}
2013-06-20 13:06:58 +04:00
2015-02-07 20:31:54 +03:00
static void
2015-02-22 05:13:04 +03:00
print_signalled ( struct tcb * tcp , const int pid , int status )
2015-02-07 20:31:54 +03:00
{
2015-02-07 22:41:48 +03:00
if ( pid = = strace_child ) {
2015-02-07 20:31:54 +03:00
exit_code = 0x100 | WTERMSIG ( status ) ;
2015-02-07 22:41:48 +03:00
strace_child = 0 ;
}
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2015-02-07 20:31:54 +03:00
if ( cflag ! = CFLAG_ONLY_STATS
& & ( qual_flags [ WTERMSIG ( status ) ] & QUAL_SIGNAL )
) {
printleader ( tcp ) ;
2011-06-24 18:41:35 +04:00
# ifdef WCOREDUMP
2015-02-07 20:31:54 +03:00
tprintf ( " +++ killed by %s %s+++ \n " ,
signame ( WTERMSIG ( status ) ) ,
WCOREDUMP ( status ) ? " (core dumped) " : " " ) ;
2011-06-24 18:41:35 +04:00
# else
2015-02-07 20:31:54 +03:00
tprintf ( " +++ killed by %s +++ \n " ,
signame ( WTERMSIG ( status ) ) ) ;
2011-08-15 13:36:09 +04:00
# endif
2015-02-07 20:31:54 +03:00
line_ended ( ) ;
}
}
1999-02-19 03:21:36 +03:00
2015-02-07 20:31:54 +03:00
static void
2015-02-22 05:13:04 +03:00
print_exited ( struct tcb * tcp , const int pid , int status )
2015-02-07 20:31:54 +03:00
{
2015-02-07 22:41:48 +03:00
if ( pid = = strace_child ) {
2015-02-07 20:31:54 +03:00
exit_code = WEXITSTATUS ( status ) ;
2015-02-07 22:41:48 +03:00
strace_child = 0 ;
}
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2015-02-07 20:31:54 +03:00
if ( cflag ! = CFLAG_ONLY_STATS & &
qflag < 2 ) {
printleader ( tcp ) ;
tprintf ( " +++ exited with %d +++ \n " , WEXITSTATUS ( status ) ) ;
line_ended ( ) ;
}
}
static void
print_stopped ( struct tcb * tcp , const siginfo_t * si , const unsigned int sig )
{
if ( cflag ! = CFLAG_ONLY_STATS
& & ! hide_log_until_execve
& & ( qual_flags [ sig ] & QUAL_SIGNAL )
) {
printleader ( tcp ) ;
if ( si ) {
tprintf ( " --- %s " , signame ( sig ) ) ;
printsiginfo ( si , verbose ( tcp ) ) ;
tprints ( " --- \n " ) ;
} else
tprintf ( " --- stopped by %s --- \n " , signame ( sig ) ) ;
line_ended ( ) ;
}
}
2015-03-21 20:13:45 +03:00
static void
2015-02-07 20:31:54 +03:00
startup_tcb ( struct tcb * tcp )
{
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " pid %d has TCB_STARTUP, initializing it " , tcp - > pid ) ;
2015-02-07 20:31:54 +03:00
tcp - > flags & = ~ TCB_STARTUP ;
Remove support for systems without PTRACE_SETOPTIONS
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
2015-02-08 16:05:53 +03:00
if ( ! use_seize ) {
2015-02-07 20:31:54 +03:00
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " setting opts 0x%x on pid %d " ,
ptrace_setoptions , tcp - > pid ) ;
2015-02-07 20:31:54 +03:00
if ( ptrace ( PTRACE_SETOPTIONS , tcp - > pid , NULL , ptrace_setoptions ) < 0 ) {
if ( errno ! = ESRCH ) {
/* Should never happen, really */
perror_msg_and_die ( " PTRACE_SETOPTIONS " ) ;
2012-03-22 12:35:51 +04:00
}
}
2015-02-07 20:31:54 +03:00
}
}
/* Returns true iff the main trace loop has to continue. */
static bool
trace ( void )
{
int pid ;
int wait_errno ;
int status ;
bool stopped ;
unsigned int sig ;
unsigned int event ;
struct tcb * tcp ;
struct rusage ru ;
if ( interrupted )
return false ;
2015-03-21 20:40:53 +03:00
/*
* Used to exit simply when nprocs hits zero , but in this testcase :
* int main ( ) { _exit ( ! ! fork ( ) ) ; }
* under strace - f , parent sometimes ( rarely ) manages
* to exit before we see the first stop of the child ,
* and we are losing track of it :
* 19923 clone ( . . . ) = 19924
* 19923 exit_group ( 1 ) = ?
* 19923 + + + exited with 1 + + +
* Exiting only when wait ( ) returns ECHILD works better .
*/
if ( popen_pid ! = 0 ) {
/* However, if -o|logger is in use, we can't do that.
* Can work around that by double - forking the logger ,
* but that loses the ability to wait for its completion
* on exit . Oh well . . .
*/
if ( nprocs = = 0 )
return false ;
}
2015-02-07 20:31:54 +03:00
if ( interactive )
sigprocmask ( SIG_SETMASK , & empty_set , NULL ) ;
pid = wait4 ( - 1 , & status , __WALL , ( cflag ? & ru : NULL ) ) ;
wait_errno = errno ;
if ( interactive )
sigprocmask ( SIG_BLOCK , & blocked_set , NULL ) ;
if ( pid < 0 ) {
if ( wait_errno = = EINTR )
return true ;
if ( nprocs = = 0 & & wait_errno = = ECHILD )
return false ;
/*
* If nprocs > 0 , ECHILD is not expected ,
* treat it as any other error here :
*/
errno = wait_errno ;
perror_msg_and_die ( " wait4(__WALL) " ) ;
}
if ( pid = = popen_pid ) {
if ( ! WIFSTOPPED ( status ) )
popen_pid = 0 ;
return true ;
}
2012-03-22 12:35:51 +04:00
2015-02-07 20:31:54 +03:00
if ( debug_flag )
print_debug_info ( pid , status ) ;
/* Look up 'pid' in our table. */
tcp = pid2tcb ( pid ) ;
if ( ! tcp ) {
tcp = maybe_allocate_tcb ( pid , status ) ;
if ( ! tcp )
return true ;
}
Optimize out PTRACE_PEEKUSER with -i
strace -i was fetching PC with a separate PEEKUSER
despite having GETREGS data:
ptrace(PTRACE_GETREGS, 22331, 0, 0x8087f00) = 0
ptrace(PTRACE_PEEKUSER, 22331, 4*EIP, [0x80dd7b7]) = 0
write(3, "[080dd7b7] ioctl(0, SNDCTL_TMR_T"..., 82) = 82
ptrace(PTRACE_SYSCALL, 22331, 0, SIG_0) = 0
Now it does this:
ptrace(PTRACE_GETREGS, 22549, 0, 0x8087ea0) = 0
write(3, "[080dd7b7] ioctl(0, SNDCTL_TMR_T"..., 82) = 82
ptrace(PTRACE_SYSCALL, 22549, 0, SIG_0) = 0
Analogous improvement in sys_sigreturn() is also implemented.
* defs.h: Declare extern struct pt_regs regs for SPARC[64] and ARM.
Declare clear_regs(), get_regs() and get_regs_error flag variable.
* strace.c (trace): Call get_regs(pid) as soon as we know the tcb
and that it is stopped.
* syscall.c (get_regs): New function. Used to fetch registers early,
just after tracee has stopped.
(printcall): Move it here from util.c. Use global regs.REG data,
if available on the arch, instead of re-fetching it.
(get_scno): Use global regs.REG data.
(get_syscall_result): Likewise.
* signal.c (sys_sigreturn): Likewise.
* util.c (printcall): Moved to syscall.c.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-05 19:36:13 +04:00
2015-02-07 20:31:54 +03:00
if ( WIFSTOPPED ( status ) )
get_regs ( pid ) ;
2015-02-14 01:45:33 +03:00
else
clear_regs ( ) ;
2015-02-07 20:31:54 +03:00
event = ( unsigned int ) status > > 16 ;
if ( event = = PTRACE_EVENT_EXEC ) {
/*
* Under Linux , execve changes pid to thread leader ' s pid ,
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
* and we see this changed pid on EVENT_EXEC and later ,
* execve sysexit . Leader " disappears " without exit
* notification . Let user know that , drop leader ' s tcb ,
* and fix up pid in execve thread ' s tcb .
* Effectively , execve thread ' s tcb replaces leader ' s tcb .
*
* BTW , leader is ' stuck undead ' ( doesn ' t report WIFEXITED
* on exit syscall ) in multithreaded programs exactly
* in order to handle this case .
*
* PTRACE_GETEVENTMSG returns old pid starting from Linux 3.0 .
* On 2.6 and earlier , it can return garbage .
*/
2015-02-07 20:31:54 +03:00
if ( os_release > = KERNEL_VERSION ( 3 , 0 , 0 ) )
tcp = maybe_switch_tcbs ( tcp , pid ) ;
Fix handling of test/threaded_execve.c testcase
Since 3.0, Linux has a way to identify which thread execve'ed.
This patch makes use of it in order to properly dispose
of disappeared ("superseded") thread leader,
and replace it with execve'ed thread.
Before this patch, strace was "leaking" thread which exec'ed.
It was thinking that it still runs. It would look like this:
18460 pause( <unfinished ...> <=== thread leader
18466 execve("/proc/self/exe", ["exe", "exe"], [/* 47 vars */] <unfinished ...>
18465 +++ exited with 0 +++ <=== exits from other threads
18460 <... pause resumed> ) = 0
The last line is wrong: it's not pause resumed, it's execve resumed.
If thread leader would do exit instead of pause, it is much worse:
strace panics because it thinks it sees return from exit syscall!
And strace isn't aware 18466 (exec'ed thread) is gone.
It still thinks it's executes execve syscall.
* strace.c: New variable "static char *os_release".
(get_os_release): New static function.
(main): Call get_os_release to retrieve Linux version.
(trace): If we see PTRACE_EVENT_EXEC, retrieve old pid, and if it
differs from new one, free one of tcbs and print correct messages.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-01-28 04:16:02 +04:00
2015-02-07 20:47:53 +03:00
if ( detach_on_execve & & ! skip_one_b_execve ) {
2015-02-07 20:31:54 +03:00
detach ( tcp ) ; /* do "-b execve" thingy */
2015-02-07 20:47:53 +03:00
return true ;
}
2015-02-07 20:31:54 +03:00
skip_one_b_execve = 0 ;
}
2012-03-15 16:44:17 +04:00
2015-02-07 20:31:54 +03:00
/* Set current output file */
current_tcp = tcp ;
2012-03-13 14:44:31 +04:00
2015-02-07 20:31:54 +03:00
if ( cflag ) {
tv_sub ( & tcp - > dtime , & ru . ru_stime , & tcp - > stime ) ;
tcp - > stime = ru . ru_stime ;
}
2009-06-03 03:49:22 +04:00
2015-02-07 20:31:54 +03:00
if ( WIFSIGNALED ( status ) ) {
print_signalled ( tcp , pid , status ) ;
droptcb ( tcp ) ;
return true ;
}
1999-02-19 03:21:36 +03:00
2015-02-07 20:31:54 +03:00
if ( WIFEXITED ( status ) ) {
print_exited ( tcp , pid , status ) ;
droptcb ( tcp ) ;
return true ;
}
2011-09-05 16:05:46 +04:00
2015-02-07 20:31:54 +03:00
if ( ! WIFSTOPPED ( status ) ) {
/*
* Neither signalled , exited or stopped .
* How could that be ?
*/
error_msg ( " pid %u not stopped! " , pid ) ;
droptcb ( tcp ) ;
return true ;
}
/* Is this the very first time we see this tracee stopped? */
if ( tcp - > flags & TCB_STARTUP ) {
2015-03-21 20:13:45 +03:00
startup_tcb ( tcp ) ;
2015-03-21 19:51:52 +03:00
if ( get_scno ( tcp ) = = 1 )
tcp - > s_prev_ent = tcp - > s_ent ;
2015-02-07 20:31:54 +03:00
}
sig = WSTOPSIG ( status ) ;
2012-01-29 05:01:44 +04:00
2015-02-07 20:31:54 +03:00
if ( event ! = 0 ) {
/* Ptrace event */
2013-02-19 18:30:12 +04:00
# if USE_SEIZE
2015-02-07 20:31:54 +03:00
if ( event = = PTRACE_EVENT_STOP ) {
/*
* PTRACE_INTERRUPT - stop or group - stop .
* PTRACE_INTERRUPT - stop has sig = = SIGTRAP here .
*/
switch ( sig ) {
case SIGSTOP :
case SIGTSTP :
case SIGTTIN :
case SIGTTOU :
stopped = true ;
2012-01-29 05:01:44 +04:00
goto show_stopsig ;
}
2011-09-05 16:05:46 +04:00
}
2015-02-07 20:31:54 +03:00
# endif
goto restart_tracee_with_sig_0 ;
}
2011-09-05 16:05:46 +04:00
2015-02-07 20:31:54 +03:00
/*
* Is this post - attach SIGSTOP ?
* Interestingly , the process may stop
* with STOPSIG equal to some other signal
* than SIGSTOP if we happend to attach
* just before the process takes a signal .
*/
if ( sig = = SIGSTOP & & ( tcp - > flags & TCB_IGNORE_ONE_SIGSTOP ) ) {
if ( debug_flag )
Consistently use error_msg instead of fprintf(stderr)
* linux/alpha/get_scno.c: Use error_msg.
* linux/arm/get_scno.c: Likewise.
* linux/mips/get_scno.c: Likewise.
* linux/sh/get_scno.c: Likewise.
* linux/x86_64/get_scno.c: Likewise.
* exit.c (sys_exit): Likewise.
* pathtrace.c (pathtrace_select, pathtrace_match): Likewise.
* strace.c (alloctcb, droptcb, detach, startup_attach,
test_ptrace_seize, init, cleanup, print_debug_info,
maybe_allocate_tcb, startup_tcb, trace): Likewise.
* syscall.c (update_personality, trace_syscall_exiting,
get_scno): Likewise.
* unwind.c (DPRINTF): Likewise.
* tests/bexecve.test: Update patterns.
* tests/detach-stopped.test: Likewise.
2015-05-26 01:51:19 +03:00
error_msg ( " ignored SIGSTOP on pid %d " , tcp - > pid ) ;
2015-02-07 20:31:54 +03:00
tcp - > flags & = ~ TCB_IGNORE_ONE_SIGSTOP ;
goto restart_tracee_with_sig_0 ;
}
1999-02-19 03:21:36 +03:00
2015-02-07 20:31:54 +03:00
if ( sig ! = syscall_trap_sig ) {
2015-09-18 16:04:02 +03:00
siginfo_t si = { } ;
2012-01-29 05:01:44 +04:00
2015-02-07 20:31:54 +03:00
/*
* True if tracee is stopped by signal
* ( as opposed to " tracee received signal " ) .
* TODO : shouldn ' t we check for errno = = EINVAL too ?
* We can get ESRCH instead , you know . . .
*/
stopped = ptrace ( PTRACE_GETSIGINFO , pid , 0 , ( long ) & si ) < 0 ;
2013-02-19 18:30:12 +04:00
# if USE_SEIZE
2015-02-07 20:31:54 +03:00
show_stopsig :
2012-01-29 19:46:46 +04:00
# endif
2015-02-07 20:31:54 +03:00
print_stopped ( tcp , stopped ? NULL : & si , sig ) ;
2012-01-29 05:01:44 +04:00
2015-02-07 20:31:54 +03:00
if ( ! stopped )
/* It's signal-delivery-stop. Inject the signal */
goto restart_tracee ;
2012-01-29 05:01:44 +04:00
2015-02-07 20:31:54 +03:00
/* It's group-stop */
if ( use_seize ) {
/*
* This ends ptrace - stop , but does * not * end group - stop .
* This makes stopping signals work properly on straced process
* ( that is , process really stops . It used to continue to run ) .
*/
if ( ptrace_restart ( PTRACE_LISTEN , tcp , 0 ) < 0 ) {
/* Note: ptrace_restart emitted error message */
exit_code = 1 ;
return false ;
2012-01-29 05:01:44 +04:00
}
2015-02-07 20:31:54 +03:00
return true ;
1999-02-19 03:21:36 +03:00
}
2015-02-07 20:31:54 +03:00
/* We don't have PTRACE_LISTEN support... */
goto restart_tracee ;
}
2011-08-21 19:35:39 +04:00
2015-02-07 20:31:54 +03:00
/* We handled quick cases, we are permitted to interrupt now. */
if ( interrupted )
return false ;
2011-08-21 19:35:39 +04:00
2015-02-07 20:31:54 +03:00
/*
* This should be syscall entry or exit .
* Handle it .
*/
if ( trace_syscall ( tcp ) < 0 ) {
/*
* ptrace ( ) failed in trace_syscall ( ) .
* Likely a result of process disappearing mid - flight .
* Observed case : exit_group ( ) or SIGKILL terminating
* all processes in thread group .
* We assume that ptrace error was caused by process death .
* We used to detach ( tcp ) here , but since we no longer
* implement " detach before death " policy / hack ,
* we can let this process to report its death to us
* normally , via WIFEXITED or WIFSIGNALED wait status .
2011-08-21 19:35:39 +04:00
*/
2015-02-07 20:31:54 +03:00
return true ;
}
restart_tracee_with_sig_0 :
sig = 0 ;
restart_tracee :
if ( ptrace_restart ( PTRACE_SYSCALL , tcp , sig ) < 0 ) {
/* Note: ptrace_restart emitted error message */
exit_code = 1 ;
return false ;
}
return true ;
1999-02-19 03:21:36 +03:00
}
2012-03-13 02:05:25 +04:00
int
main ( int argc , char * argv [ ] )
{
init ( argc , argv ) ;
2015-02-07 20:31:54 +03:00
while ( trace ( ) )
;
2012-03-13 02:05:25 +04:00
cleanup ( ) ;
fflush ( NULL ) ;
2012-07-13 00:54:46 +04:00
if ( shared_log ! = stderr )
fclose ( shared_log ) ;
if ( popen_pid ) {
while ( waitpid ( popen_pid , NULL , 0 ) < 0 & & errno = = EINTR )
;
}
2012-03-13 02:05:25 +04:00
if ( exit_code > 0xff ) {
/* Avoid potential core file clobbering. */
2013-03-21 01:40:15 +04:00
struct_rlimit rlim = { 0 , 0 } ;
set_rlimit ( RLIMIT_CORE , & rlim ) ;
2012-03-13 02:05:25 +04:00
/* Child was killed by a signal, mimic that. */
exit_code & = 0xff ;
signal ( exit_code , SIG_DFL ) ;
raise ( exit_code ) ;
/* Paranoia - what if this signal is not fatal?
Exit with 128 + signo then . */
exit_code + = 128 ;
}
return exit_code ;
}