2015-12-17 20:56:48 +03:00
/*
* Copyright ( c ) 2014 Zubin Mithra < zubin . mithra @ gmail . com >
2016-01-31 02:50:54 +03:00
* Copyright ( c ) 2014 - 2016 Dmitry V . Levin < ldv @ altlinux . org >
2015-12-17 20:56:48 +03:00
* All rights reserved .
*
* Redistribution and use in source and binary forms , with or without
* modification , are permitted provided that the following conditions
* are met :
* 1. Redistributions of source code must retain the above copyright
* notice , this list of conditions and the following disclaimer .
* 2. Redistributions in binary form must reproduce the above copyright
* notice , this list of conditions and the following disclaimer in the
* documentation and / or other materials provided with the distribution .
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission .
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ` ` AS IS ' ' AND ANY EXPRESS OR
* IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED .
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT , INDIRECT ,
* INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL DAMAGES ( INCLUDING , BUT
* NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE ,
* DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT
* ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*/
2014-08-21 07:17:48 +04:00
# include "defs.h"
# include <netinet/in.h>
# include <sys/socket.h>
# include <arpa/inet.h>
# include <linux/netlink.h>
# include <linux/sock_diag.h>
# include <linux/inet_diag.h>
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
# include <linux/unix_diag.h>
# include <linux/rtnetlink.h>
2015-01-09 06:03:39 +03:00
# if !defined NETLINK_SOCK_DIAG && defined NETLINK_INET_DIAG
# define NETLINK_SOCK_DIAG NETLINK_INET_DIAG
# endif
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
# include <sys/un.h>
# ifndef UNIX_PATH_MAX
# define UNIX_PATH_MAX sizeof(((struct sockaddr_un *) 0)->sun_path)
# endif
2014-08-21 07:17:48 +04:00
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
typedef struct {
unsigned long inode ;
char * details ;
} cache_entry ;
# define CACHE_SIZE 1024U
static cache_entry cache [ CACHE_SIZE ] ;
# define CACHE_MASK (CACHE_SIZE - 1)
static int
2016-02-10 20:43:09 +03:00
cache_and_print_inode_details ( const unsigned long inode , char * const details )
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
{
cache_entry * e = & cache [ inode & CACHE_MASK ] ;
free ( e - > details ) ;
e - > inode = inode ;
e - > details = details ;
tprints ( details ) ;
return 1 ;
}
bool
print_sockaddr_by_inode_cached ( const unsigned long inode )
{
2016-02-10 20:43:09 +03:00
const cache_entry * const e = & cache [ inode & CACHE_MASK ] ;
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
if ( e & & inode = = e - > inode ) {
tprints ( e - > details ) ;
return true ;
}
return false ;
}
2014-08-21 07:17:48 +04:00
static bool
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
inet_send_query ( const int fd , const int family , const int proto )
2014-08-21 07:17:48 +04:00
{
2014-11-21 22:59:16 +03:00
struct sockaddr_nl nladdr = {
. nl_family = AF_NETLINK
} ;
2014-08-21 07:17:48 +04:00
struct {
2016-02-10 20:43:09 +03:00
const struct nlmsghdr nlh ;
const struct inet_diag_req_v2 idr ;
2014-11-21 22:59:16 +03:00
} req = {
. nlh = {
. nlmsg_len = sizeof ( req ) ,
. nlmsg_type = SOCK_DIAG_BY_FAMILY ,
. nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST
} ,
. idr = {
. sdiag_family = family ,
. sdiag_protocol = proto ,
. idiag_states = - 1
}
} ;
2014-08-21 07:17:48 +04:00
struct iovec iov = {
. iov_base = & req ,
. iov_len = sizeof ( req )
} ;
2016-02-10 20:43:09 +03:00
const struct msghdr msg = {
. msg_name = & nladdr ,
2014-08-21 07:17:48 +04:00
. msg_namelen = sizeof ( nladdr ) ,
. msg_iov = & iov ,
. msg_iovlen = 1
} ;
for ( ; ; ) {
if ( sendmsg ( fd , & msg , 0 ) < 0 ) {
if ( errno = = EINTR )
continue ;
return false ;
}
return true ;
}
}
2016-01-31 02:50:54 +03:00
static int
2016-02-10 20:43:09 +03:00
inet_parse_response ( const char * const proto_name , const void * const data ,
2016-01-31 02:50:54 +03:00
const int data_len , const unsigned long inode )
2014-08-21 07:17:48 +04:00
{
2016-02-10 20:43:09 +03:00
const struct inet_diag_msg * const diag_msg = data ;
2014-08-21 07:17:48 +04:00
static const char zero_addr [ sizeof ( struct in6_addr ) ] ;
socklen_t addr_size , text_size ;
2016-01-29 02:46:56 +03:00
if ( data_len < ( int ) NLMSG_LENGTH ( sizeof ( * diag_msg ) ) )
2016-01-31 02:50:54 +03:00
return - 1 ;
2014-08-21 07:17:48 +04:00
if ( diag_msg - > idiag_inode ! = inode )
2016-01-31 02:50:54 +03:00
return 0 ;
2014-08-21 07:17:48 +04:00
switch ( diag_msg - > idiag_family ) {
case AF_INET :
addr_size = sizeof ( struct in_addr ) ;
text_size = INET_ADDRSTRLEN ;
break ;
case AF_INET6 :
addr_size = sizeof ( struct in6_addr ) ;
text_size = INET6_ADDRSTRLEN ;
break ;
default :
2016-01-31 02:50:54 +03:00
return - 1 ;
2014-08-21 07:17:48 +04:00
}
char src_buf [ text_size ] ;
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
char * details ;
2014-08-21 07:17:48 +04:00
if ( ! inet_ntop ( diag_msg - > idiag_family , diag_msg - > id . idiag_src ,
src_buf , text_size ) )
2016-01-31 02:50:54 +03:00
return - 1 ;
2014-08-21 07:17:48 +04:00
if ( diag_msg - > id . idiag_dport | |
memcmp ( zero_addr , diag_msg - > id . idiag_dst , addr_size ) ) {
char dst_buf [ text_size ] ;
if ( ! inet_ntop ( diag_msg - > idiag_family , diag_msg - > id . idiag_dst ,
dst_buf , text_size ) )
2016-01-31 02:50:54 +03:00
return - 1 ;
2014-08-21 07:17:48 +04:00
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
if ( asprintf ( & details , " %s:[%s:%u->%s:%u] " , proto_name ,
src_buf , ntohs ( diag_msg - > id . idiag_sport ) ,
dst_buf , ntohs ( diag_msg - > id . idiag_dport ) ) < 0 )
return false ;
2014-08-21 07:17:48 +04:00
} else {
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
if ( asprintf ( & details , " %s:[%s:%u] " , proto_name , src_buf ,
ntohs ( diag_msg - > id . idiag_sport ) ) < 0 )
return false ;
2014-08-21 07:17:48 +04:00
}
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
return cache_and_print_inode_details ( inode , details ) ;
2014-08-21 07:17:48 +04:00
}
static bool
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
receive_responses ( const int fd , const unsigned long inode ,
2014-12-27 02:29:26 +03:00
const char * proto_name ,
2016-01-31 02:50:54 +03:00
int ( * parser ) ( const char * , const void * ,
int , unsigned long ) )
2014-08-21 07:17:48 +04:00
{
2015-03-03 02:39:41 +03:00
static long buf [ 8192 / sizeof ( long ) ] ;
2014-11-21 22:59:16 +03:00
struct sockaddr_nl nladdr = {
. nl_family = AF_NETLINK
} ;
2014-08-21 07:17:48 +04:00
struct iovec iov = {
. iov_base = buf ,
. iov_len = sizeof ( buf )
} ;
2016-01-28 00:35:50 +03:00
int flags = 0 ;
2014-08-21 07:17:48 +04:00
for ( ; ; ) {
struct msghdr msg = {
2016-02-10 20:43:09 +03:00
. msg_name = & nladdr ,
2014-08-21 07:17:48 +04:00
. msg_namelen = sizeof ( nladdr ) ,
. msg_iov = & iov ,
2014-11-21 22:59:16 +03:00
. msg_iovlen = 1
2014-08-21 07:17:48 +04:00
} ;
2016-02-10 20:43:09 +03:00
ssize_t ret = recvmsg ( fd , & msg , flags ) ;
2014-08-21 07:17:48 +04:00
if ( ret < 0 ) {
if ( errno = = EINTR )
continue ;
return false ;
}
2016-01-31 02:50:54 +03:00
2016-02-10 20:43:09 +03:00
const struct nlmsghdr * h = ( struct nlmsghdr * ) buf ;
2016-01-31 02:50:54 +03:00
if ( ! NLMSG_OK ( h , ret ) )
2014-08-21 07:17:48 +04:00
return false ;
2016-01-31 02:50:54 +03:00
for ( ; NLMSG_OK ( h , ret ) ; h = NLMSG_NEXT ( h , ret ) ) {
if ( h - > nlmsg_type ! = SOCK_DIAG_BY_FAMILY )
return false ;
2016-02-10 20:43:09 +03:00
const int rc = parser ( proto_name , NLMSG_DATA ( h ) ,
h - > nlmsg_len , inode ) ;
2016-01-31 02:50:54 +03:00
if ( rc > 0 )
2014-08-21 07:17:48 +04:00
return true ;
2016-01-31 02:50:54 +03:00
if ( rc < 0 )
return false ;
2014-08-21 07:17:48 +04:00
}
2016-01-28 00:35:50 +03:00
flags = MSG_DONTWAIT ;
2014-08-21 07:17:48 +04:00
}
}
2014-12-10 06:55:06 +03:00
static bool
2014-12-27 02:29:26 +03:00
inet_print ( const int fd , const int family , const int protocol ,
const unsigned long inode , const char * proto_name )
2014-12-10 06:55:06 +03:00
{
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
return inet_send_query ( fd , family , protocol )
2014-12-27 02:29:26 +03:00
& & receive_responses ( fd , inode , proto_name , inet_parse_response ) ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
}
static bool
unix_send_query ( const int fd , const unsigned long inode )
{
struct sockaddr_nl nladdr = {
. nl_family = AF_NETLINK
} ;
struct {
2016-02-10 20:43:09 +03:00
const struct nlmsghdr nlh ;
const struct unix_diag_req udr ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
} req = {
. nlh = {
. nlmsg_len = sizeof ( req ) ,
. nlmsg_type = SOCK_DIAG_BY_FAMILY ,
2016-01-31 03:35:29 +03:00
. nlmsg_flags = NLM_F_REQUEST
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
} ,
. udr = {
. sdiag_family = AF_UNIX ,
. udiag_ino = inode ,
. udiag_states = - 1 ,
2016-01-31 03:35:29 +03:00
. udiag_show = UDIAG_SHOW_NAME | UDIAG_SHOW_PEER ,
. udiag_cookie = { ~ 0U , ~ 0U }
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
}
} ;
struct iovec iov = {
. iov_base = & req ,
. iov_len = sizeof ( req )
} ;
2016-02-10 20:43:09 +03:00
const struct msghdr msg = {
. msg_name = & nladdr ,
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
. msg_namelen = sizeof ( nladdr ) ,
. msg_iov = & iov ,
. msg_iovlen = 1
} ;
for ( ; ; ) {
if ( sendmsg ( fd , & msg , 0 ) < 0 ) {
if ( errno = = EINTR )
continue ;
return false ;
}
return true ;
}
}
2016-01-31 02:50:54 +03:00
static int
unix_parse_response ( const char * proto_name , const void * data ,
const int data_len , const unsigned long inode )
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
{
const struct unix_diag_msg * diag_msg = data ;
struct rtattr * attr ;
int rta_len = data_len - NLMSG_LENGTH ( sizeof ( * diag_msg ) ) ;
uint32_t peer = 0 ;
size_t path_len = 0 ;
char path [ UNIX_PATH_MAX + 1 ] ;
2016-01-24 01:46:40 +03:00
if ( rta_len < 0 )
2016-01-31 02:50:54 +03:00
return - 1 ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
if ( diag_msg - > udiag_ino ! = inode )
2016-01-31 02:50:54 +03:00
return 0 ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
if ( diag_msg - > udiag_family ! = AF_UNIX )
2016-01-31 02:50:54 +03:00
return - 1 ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
for ( attr = ( struct rtattr * ) ( diag_msg + 1 ) ;
RTA_OK ( attr , rta_len ) ;
attr = RTA_NEXT ( attr , rta_len ) ) {
switch ( attr - > rta_type ) {
case UNIX_DIAG_NAME :
if ( ! path_len ) {
path_len = RTA_PAYLOAD ( attr ) ;
if ( path_len > UNIX_PATH_MAX )
path_len = UNIX_PATH_MAX ;
memcpy ( path , RTA_DATA ( attr ) , path_len ) ;
path [ path_len ] = ' \0 ' ;
}
break ;
case UNIX_DIAG_PEER :
if ( RTA_PAYLOAD ( attr ) > = 4 )
2016-01-31 02:50:54 +03:00
peer = * ( uint32_t * ) RTA_DATA ( attr ) ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
break ;
}
}
/*
* print obtained information in the following format :
* " UNIX:[ " SELF_INODE [ " -> " PEER_INODE ] [ " , " SOCKET_FILE ] " ] "
*/
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
if ( ! peer & & ! path_len )
return - 1 ;
char peer_str [ 3 + sizeof ( peer ) * 3 ] ;
if ( peer )
snprintf ( peer_str , sizeof ( peer_str ) , " ->%u " , peer ) ;
else
peer_str [ 0 ] = ' \0 ' ;
const char * path_str ;
if ( path_len ) {
char * outstr = alloca ( 4 * path_len + 4 ) ;
outstr [ 0 ] = ' , ' ;
if ( path [ 0 ] = = ' \0 ' ) {
outstr [ 1 ] = ' @ ' ;
string_quote ( path + 1 , outstr + 2 ,
path_len - 1 , QUOTE_0_TERMINATED ) ;
} else {
string_quote ( path , outstr + 1 ,
path_len , QUOTE_0_TERMINATED ) ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
}
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
path_str = outstr ;
} else {
path_str = " " ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
}
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
char * details ;
if ( asprintf ( & details , " %s:[%lu%s%s] " , proto_name , inode ,
peer_str , path_str ) < 0 )
2016-01-31 02:50:54 +03:00
return - 1 ;
Implement caching of print_sockaddr_by_inode
As -yy parser, compared to -y, needs to do at least 5 extra syscalls
(getxattr, socket, sendmsg, recvmsg, close) to print socket details,
caching results of netlink conversations between strace and kernel
noticeably reduces amount of system time spent by strace.
The caching is safe since sockets do not change their addresses after
successful bind or connect syscall.
* defs.h (string_quote, print_sockaddr_by_inode_cached): New prototypes.
* socketutils.c (cache_entry): New type.
(CACHE_SIZE, CACHE_MASK): New macros.
(cache): New static array.
(cache_and_print_inode_details): New static function.
(print_sockaddr_by_inode_cached): New function.
(inet_parse_response, unix_parse_response): Use
cache_and_print_inode_details.
* util.c (printfd): Use string_quote and print_sockaddr_by_inode_cached.
(string_quote): Remove static qualifier.
* NEWS: Mention this improvement.
* tests/unix-yy.c (main): Update.
2016-02-02 02:14:59 +03:00
return cache_and_print_inode_details ( inode , details ) ;
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
}
static bool
2016-02-10 20:43:09 +03:00
unix_print ( const int fd , const unsigned long inode )
Support unix domain sockets in -yy option
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
2014-12-24 14:59:31 +03:00
{
return unix_send_query ( fd , inode )
2014-12-27 02:29:26 +03:00
& & receive_responses ( fd , inode , " UNIX " , unix_parse_response ) ;
2014-12-10 06:55:06 +03:00
}
2016-02-10 20:39:57 +03:00
static bool
tcp_v4_print ( const int fd , const unsigned long inode )
{
return inet_print ( fd , AF_INET , IPPROTO_TCP , inode , " TCP " ) ;
}
static bool
udp_v4_print ( const int fd , const unsigned long inode )
{
return inet_print ( fd , AF_INET , IPPROTO_UDP , inode , " UDP " ) ;
}
static bool
tcp_v6_print ( const int fd , const unsigned long inode )
{
return inet_print ( fd , AF_INET6 , IPPROTO_TCP , inode , " TCPv6 " ) ;
}
static bool
udp_v6_print ( const int fd , const unsigned long inode )
{
return inet_print ( fd , AF_INET6 , IPPROTO_UDP , inode , " UDPv6 " ) ;
}
2014-08-21 07:17:48 +04:00
/* Given an inode number of a socket, print out the details
* of the ip address and port . */
bool
2016-02-10 20:43:09 +03:00
print_sockaddr_by_inode ( const unsigned long inode , const char * const proto_name )
2014-08-21 07:17:48 +04:00
{
2016-02-10 20:39:57 +03:00
static const struct {
const char * const name ;
bool ( * const print ) ( int , unsigned long ) ;
} protocols [ ] = {
{ " TCP " , tcp_v4_print } ,
{ " UDP " , udp_v4_print } ,
{ " TCPv6 " , tcp_v6_print } ,
{ " UDPv6 " , udp_v6_print } ,
{ " UNIX " , unix_print }
} ;
2014-08-21 07:17:48 +04:00
2016-02-10 20:39:57 +03:00
const int fd = socket ( AF_NETLINK , SOCK_RAW , NETLINK_SOCK_DIAG ) ;
2014-08-21 07:17:48 +04:00
if ( fd < 0 )
return false ;
2016-02-10 20:39:57 +03:00
bool r = false ;
unsigned int i ;
2014-08-21 07:17:48 +04:00
2014-12-10 06:55:06 +03:00
if ( proto_name ) {
2016-02-10 20:39:57 +03:00
for ( i = 0 ; i < ARRAY_SIZE ( protocols ) ; + + i ) {
if ( strcmp ( proto_name , protocols [ i ] . name ) = = 0 ) {
r = protocols [ i ] . print ( fd , inode ) ;
break ;
}
}
2016-01-23 19:35:02 +03:00
if ( ! r ) {
tprintf ( " %s:[%lu] " , proto_name , inode ) ;
r = true ;
}
2014-12-10 06:55:06 +03:00
} else {
2014-12-27 02:29:26 +03:00
for ( i = 0 ; i < ARRAY_SIZE ( protocols ) ; + + i ) {
2016-02-10 20:39:57 +03:00
if ( ( r = protocols [ i ] . print ( fd , inode ) ) )
2014-12-27 02:29:26 +03:00
break ;
2014-08-21 07:17:48 +04:00
}
}
2014-12-27 02:29:26 +03:00
2014-08-21 07:17:48 +04:00
close ( fd ) ;
2014-12-10 06:55:06 +03:00
return r ;
2014-08-21 07:17:48 +04:00
}