IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Starting with commit
v2.6.29-6609-g11d06b2a1e5658f448a308aa3beb97bacd64a940, personality
syscall never fails to set the personality, but before commit
v2.6.35-rc1-372-g485d527 it still could return an error.
Starting with that commit, personality syscall never returns an error.
* linux/*/syscallent.h: Set SYSCALL_NEVER_FAILS flag in personality
syscall entries.
* syscall.c (SEN): New temporary macro.
* linux/dummy.h (sys_printargs): New macro.
* linux/subcall.h: Wrap all sys_func entries using SEN.
* linux/*/syscallent*.h: Likewise.
* linux/s390/syscallent.h (1, 180, 181): Change syscall names to match
__NR_* constants defined in arch/s390/include/uapi/asm/unistd.h.
* linux/s390x/syscallent.h: Likewise.
According to linux/arch/s390/include/uapi/asm/unistd.h, readdir is
defined both on s390 and s390x, while getrlimit, _llseek, sendfile64,
and fadvise64_64 are defined on s390 only.
* linux/s390x/syscallent.h (readdir): Add.
(getrlimit, _llseek, sendfile64, fadvise64_64): Remove.
Syscall entries for socket and ipc subcalls are the same on all
architectures, or at least they should be the same, so move them
to the single file.
* linux/subcall.h: Add syscall entries for socket and ipc subcalls.
* linux/arm/syscallent.h: Remove entries for socket and ipc subcalls.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
Add SE flag to execve, exit, and exit_group syscall entries.
Add SI flag to brk, execve, mmap, mprotect, mremap, munmap,
remap_file_pages, shmat, and shmdt syscall entries.
The number of pread and pwrite arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned
32bit it equals to 5, and for aligned 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of pread and pwrite
arguments to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/or1k/syscallent.h: Change the number of pread and pwrite
arguments to 5.
The number of preadv and pwritev arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned 32bit
it equals to 5, and for aligned 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of preadv and pwritev
arguments to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/ia64/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Change the number of preadv and pwritev
arguments to 6.
* linux/sh/syscallent.h: Likewise.
* linux/xtensa/syscallent.h: Likewise.
The number of fallocate arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4,
for 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of fallocate arguments
to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Set fallocate handler and flags.
The number of fadvise64 arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned
32bit it equals to 5, and for aligned 32bit it equals to 6.
The number of fadvise64_64 arguments is 4 for 64bit and ilp32, for
unaligned 32bit and most of aligned 32bit it equals to 6, and for
mips o32 it equals to 7.
* linux/alpha/syscallent.h: Set fadvise64 handler.
* linux/s390/syscallent.h: Likewise.
* linux/hppa/syscallent.h: Set fadvise64_64 handler, change the number
of syscall arguments to 6.
* linux/ia64/syscallent.h: Change the number of fadvise64 arguments
to 4.
* linux/mips/syscallent-n32.h: Likewise.
* linux/tile/syscallent1.h: Change the number of fadvise64 arguments
to 5.
* linux/mips/syscallent-o32.h: Change the number of fadvise64_64
arguments to 7.
* linux/s390x/syscallent.h: Change fadvise64_64 handler. Set fadvise64
handler. Change numbers of fadvise64 and fadvise64_64 arguments to 4.
* linux/sh64/syscallent.h: Change fadvise64_64 handler.
Change numbers of fadvise64 and fadvise64_64 arguments to 4.
* linux/sparc/syscallent.h: Set fadvise64 and fadvise64_64 handlers,
change numbers of their arguments to 5 and 6.
* linux/x86_64/syscallent.h: Change fadvise64 handler.
The number of readahead arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 3, for unaligned 32bit it
equals to 4, and for aligned 32bit it equals to 5.
* linux/aarch64/syscallent1.h: Set number of readahead arguments to 3.
* linux/alpha/syscallent.h: Likewise.
* linux/ia64/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/or1k/syscallent.h: Set number of readahead arguments to 4.
* linux/sh/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/xtensa/syscallent.h: Set number of readahead arguments to 5.
or1k was missing TM on many memory-related syscalls
sys_lookup_dcookie is 3-arg on 64-bit arches, and isn't TF
sys_recvmsg is 3-arg on all arches
sys_nfsservctl is 3-arg on all arches
sys_timerfd_create is 2-arg on all arches
sys_[f]truncate64 is 4-arg or 3-arg, never 5-arg
truncate64 is TF
sys_[l]lseek is TD
fstat[64] is TD
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Previous code merges too many similar, but different ways
of decoding mmap. For example, sys_old_mmap is "params in memory"
API... except SH[64], where it is "params in regs",
i.e. what sys_mmap ("new mmap") function does on other arches!
It's much simpler when every mmap handler has same API regardless
of arch. Where API means whether params are in regs or in memory,
and whether offset is in bytes, pages, or 4k blocks.
Then we just insert correct function pointers into
arch syscall tables.
It turns out there are four common mmap APIs over
all architectures which exist in Linux kernel,
and one outlier for S390.
A number of mmap decoders were plain wrong in arch tables.
For example, BFIN has no old_mmap. It returns ENOSYS.
I checked kernel sources for all arches nad fixed the tables.
There was dead code for x86_64 for old_mmap:
x86_64 has no old_mmap.
* mem.c: Refactor mmap functions so that we have five mmap syscall
handlers, each with the fixed API (not varying by arch).
* pathtrace.c (pathtrace_match): Adjust sys_func == mmap_func checks.
* linux/syscall.h: Declare new mmap syscall handler functions.
* linux/arm/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/avr32/syscallent.h: mmap is sys_mmap_pgoff.
* linux/bfin/syscallent.h: old_mmap is ENOSYS, mmap2 is sys_mmap_pgoff.
* linux/hppa/syscallent.h: mmap2 is sys_mmap_4koff.
* linux/i386/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/ia64/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/m68k/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/microblaze/syscallent.h: old_mmap is sys_mmap, mmap2 is sys_mmap_pgoff.
* linux/mips/syscallent.h: mmap is sys_mmap_4kgoff.
* linux/or1k/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/powerpc/syscallent.h: mmap2 is sys_mmap_4kgoff.
* linux/s390/syscallent.h: mmap2 is sys_old_mmap_pgoff.
* linux/s390x/syscallent.h: mmap is sys_old_mmap and thus has 1 arg.
* linux/sh/syscallent.h: old_mmap2 is sys_mmap, mmap2 is sys_mmap_4koff.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent1.h: mmap is TD|TM.
* linux/tile/syscallent1.h: mmap2 is sys_mmap_4koff.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Undefined syscall looked like this before this change:
{ 5, 0, printargs, "SYS_53" },
That is, "SYS_53" string had to be allocated and stored in strace binary.
Since now SCNO_IN_RANGE() macro requires sysent[scno].sys_func != NULL
for valid syscalls, we can replace printargs with NULL in such lines
and make them "invalid", thus not requiring syscall name string.
Savings on i386:
text data bss dec hex filename
237389 704 18944 257037 3ec0d strace.before
236973 704 18944 256621 3ea6d strace
Savings on mips:
336551 153692 38320 528563 810b3 strace.before
275543 153688 38320 467551 7225f strace
Tested to still decode undefined syscalls correctly (syscall no. 222 on i386).
* linux/*/syscallent.h: Replace 'printargs, "SYS_nnn"' with
'NULL, NULL'.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Affected names are "_newselect", "_llseek", "_sysctl".
I see no apparent reason why they have leading underscores.
Moreover, some arches have underscored names and some have
non-underscored ones. This is not consistent.
I verified that every architectire I touched did not have
a similarly named syscall without underscore, thus this change
does not introduce new ambiquities.
I left "_exit" untouched for now, but the same points stand for it too:
some architectures use "exit" and no one complains. So why many
arches are using "_exit"?
* linux/*/syscallent.h: Remove underscores from displayed
syscall names for _newselect, _llseek, _sysctl.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* linux/dummy.h: Add aliases to printargs() for those of dummy parsers
that had no own names before.
* linux/*/syscallent.h: Use these new names instead of printargs.
* io.c (print_loff_t): New function.
(sys_sendfile64): Use it.
(splice_flags): New xlat structure.
(sys_tee, sys_splice, sys_vmsplice): New functions.
* linux/syscall.h (sys_tee, sys_splice, sys_vmsplice): Declare them.
* linux/*/syscallent.h: Use them.
Usage -1 as argument count in syscallent tables
necessitates the check for it, a-la:
if (sysent[tcp->scno].nargs != -1)
tcp->u_nargs = sysent[tcp->scno].nargs;
else
tcp->u_nargs = MAX_ARGS;
which is stupid: we waste cycles checking something which
is constant and known at compile time.
* defs.h: Make struct sysent::nargs unsigned.
* freebsd/i386/syscallent.h: Replace nargs of -1 with MA.
* linux/s390/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* svr4/syscallent.h: Likewise.
* freebsd/syscalls.pl: Likewise in generator script.
* syscallent.sh: Likewise in generator script.
* syscall.c: Add define MA MAX_ARGS / undef MA around includes
of syscallent[N].h.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
I noticed that tcp->u_args[MAX_ARGS] array is way larger than
I'd expect: for all arches except HPPA it has 32 (!) elements.
I looked at the code and so far I spotted only one abuser of
this fact: sys_sigreturn. On several arches, it saves sigset_t
into tcp->u_args[1...N] on entry and prints it on exit, a-la
memcpy(&tcp->u_arg[1], &sc.oldmask[0], sizeof(sigset_t))
The problem here is that in glibc sigset_t is insanely large:
128 bytes, and using sizeof(sigset_t) in memcpy will overrun
&tcp->u_args[1] even with MAX_ARGS == 32:
On 32 bits, sizeof(tcp->u_args) == 32*4 == 128 bytes!
We may already have a bug there!
This commit changes the code to save NSIG / 8 bytes only.
NSIG can't ever be > 256, and in practice is <= 129,
thus NSIG / 8 is <= 16 bytes == 4 32-bit words,
and even MAX_ARGS == 5 should be enough for saving signal masks.
* defs.h: Reduce MAX_ARGS for X86_64 and I386 from 32 to 8
for FreeBSD and to 6 for everyone else. Add comment about current
state of needed MAX_ARGS.
* signal.c: Add comment about size of sigset_t.
(sprintsigmask): Reduce static string buffer from 8k to 2k.
(sys_sigreturn): Fix sigset saving to save only NSIG / 8 bytes,
not sizeof(sigset_t) bytes.
* linux/mips/syscallent.h: Reduce nargs of printargs-type syscall to 7.
* linux/arm/syscallent.h: Reduce nargs of printargs-type syscall to 6.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
* linux/*/syscallent.h: For those arches which use sys_sigreturn,
not printargs, to show [rt_]sigreturn syscall, change number of arguments
from 1 to 0: sys_sigreturn function doesn't use syscall parameters.
(I guess kernel doesn't actually _have_ any parameters for this syscall,
at least on these architectures). Do the same change for I386 and x86-64
even though they use printargs: I looked at kernel code and syscall
definitely doesn't have any parameters on these arches.
(I hesitate to change 1 to 0 params for arches I don't know -
it is remotely possible some of them do have a parameter for this syscall).
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
