IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As ioctls_inc.h generated natively on x32 differs both from 32/ioctls_inc.h
(by 45 entries) and from linux/64/ioctls_inc.h (by 322 entries), use x32
specific ioctl entries on x32 personality.
* linux/x32/ioctls_inc0.h: Generate from linux v3.19 using ioctls_gen.sh.
* linux/x86_64/ioctlent2.h: Remove.
* linux/x86_64/ioctls_arch2.h: New file.
* linux/x86_64/ioctls_inc2.h: New file.
* Makefile.am (EXTRA_DIST): Remove linux/x86_64/ioctlent2.h, add
linux/x86_64/ioctls_arch2.h and linux/x86_64/ioctls_inc2.h.
As an exception to the general rules that syscall names should match
__NR_* constants defined in kernel headers, show select as "select"
and old select as "oldselect".
* linux/arm/syscallent.h (82): Change name to oldselect.
* linux/hppa/syscallent.h (142): Change name to select.
* linux/mips/syscallent-n32.h (6022): Likewise.
* linux/mips/syscallent-n64.h (5022): Likewise.
* linux/mips/syscallent-o32.h (4142): Likewise.
* linux/sparc/syscallent.h (230): Likewise.
* linux/s390/syscallent.h (1, 180, 181): Change syscall names to match
__NR_* constants defined in arch/s390/include/uapi/asm/unistd.h.
* linux/s390x/syscallent.h: Likewise.
* linux/hppa/syscallent.h (18, 28, 59, 84, 108, 109, 280):
Change syscall names to match __NR_* constants defined in
arch/parisc/include/uapi/asm/unistd.h.
Looks like the similarity of these names caused confusion when generating
the syscall table. getresgid was wired to the wrong output while the other
two were wired up to printargs instead of the real printer.
* linux/ia64/syscallent.h: Connect getresuid to sys_getresuid, getresgid to
sys_getresgid, and setresgid to sys_setresgid.
The ia64 port pulls in the i386 syscall table so it can decode
32bit apps, so we need to enable the 16bit uid parsers for it.
* defs.h (NEED_UID16_PARSERS): Define to 1 for IA64.
* linux/ia64/syscallent.h: Undefine sys_stime to avoid redefine warnings.
Assume that the kernel is v2.5.46 or newer, i.e. PTRACE_SETOPTIONS
and PTRACE_O_TRACESYSGOOD|PTRACE_O_TRACEEXEC|PTRACE_O_TRACECLONE
are universally available.
This change removes all code that implemented post-execve SIGTRAP
handling and fork/vfork/clone->CLONE_PTRACE substitution.
* defs.h (TCB_BPTSET, TCB_WAITEXECVE): Remove macros.
(need_fork_exec_workarounds, setbpt, clearbpt): Remove declarations.
* strace.c (need_fork_exec_workarounds,
test_ptrace_setoptions_followfork, test_ptrace_setoptions_for_all):
Remove.
(syscall_trap_sig): Set to (SIGTRAP | 0x80).
(ptrace_setoptions): Set to (PTRACE_O_TRACESYSGOOD | PTRACE_O_TRACEEXEC).
(detach): Do not test for TCB_BPTSET.
(init): Do not call test_ptrace_setoptions_followfork and
test_ptrace_setoptions_for_all. Do not test for TCB_BPTSET.
* syscall.c (syscall_fixup_on_sysenter, internal_fork, internal_exec,
syscall_fixup_for_fork_exec, syscall_fixup_on_sysexit): Remove.
(trace_syscall_entering): Do not test for TCB_WAITEXECVE. Do not call
syscall_fixup_on_sysenter and syscall_fixup_for_fork_exec.
(trace_syscall_exiting): Do not call syscall_fixup_on_sysexit and
syscall_fixup_for_fork_exec.
[IA64] (ia64_ia32mode): Make static.
* linux/ia64/arch_regs.h (ia64_ia32mode): Remove declaration.
* util.c: Do not include "syscall.h".
(arg_setup, get_arg0, get_arg1, set_arg0, set_arg1, restore_arg0,
restore_arg1, arg_finish_change, change_syscall, setbpt, clearbpt):
Remove.
* tests/ptrace_setoptions.test: Remove.
* tests/Makefile.am (TESTS): Remove it.
* linux/inotify.h: Remove.
* Makefile.am (EXTRA_DIST): Remove it.
* inotify.c: Do not include <linux/inotify.h>.
* xlat/inotify_flags.in: Add default values.
* linux/mips/arch_regs.h (struct mips_regs): New structure.
(mips_REG_*): New macros.
* signal.c (sys_sigreturn) [MIPS]: Use mips_REG_SP.
* syscall.c [MIPS] (struct mips_regs): New variable.
[MIPS] (ARCH_REGS_FOR_GETREGS): New macro.
(mips_a3, mips_r2): Remove.
(print_pc) [MIPS]: Use mips_REG_EPC.
(get_scno) [MIPS]: Use mips_REG_V0 and mips_REG_A3.
(get_syscall_args) [MIPS]: Use mips_REG_A[0-5].
(get_syscall_result) [MIPS]: Remove.
(get_error) [MIPS]: Use mips_REG_A3 and mips_REG_V0.
Some gcc versions complain about assigning long* to uint32_t* on i386.
* syscall.c [I386] (i386_esp_ptr): Change type from uint32_t* to long*.
* linux/i386/arch_regs.h (i386_esp_ptr): Likewise.
* linux/x86_64/arch_regs.h: Do not include "i386/arch_regs.h".
(i386_esp_ptr): New prototype.
* regs.h: New file.
* Makefile.am (strace_SOURCES): Add it.
* linux/arch_regs.h: New file.
* linux/alpha/arch_regs.h: Likewise.
* linux/arm/arch_regs.h: Likewise.
* linux/hppa/arch_regs.h: Likewise.
* linux/i386/arch_regs.h: Likewise.
* linux/ia64/arch_regs.h: Likewise.
* linux/mips/arch_regs.h: Likewise.
* linux/powerpc/arch_regs.h: Likewise.
* linux/sh64/arch_regs.h: Likewise.
* linux/sparc/arch_regs.h: Likewise.
* linux/sparc64/arch_regs.h: Likewise.
* linux/tile/arch_regs.h: Likewise.
* linux/x86_64/arch_regs.h: Likewise.
* Makefile.am (EXTRA_DIST): Add them.
* defs.h: Remove definitions of PTRACE_*, REG_*, PT_*, U_REG_*,
and ARM_* macros.
Remove declarations of struct pt_regs variables.
[SPARC]: Do not include <asm/psr.h>.
[SPARC64]: Do not include <asm/psrcompat.h>.
* bjm.c: Do not include <sys/user.h>.
* process.c: Include "regs.h".
Do not include <sys/user.h> and <sys/reg.h>.
[IA64]: Do not include <asm/ptrace_offsets.h> and <asm/rse.h>.
* util.c: Likewise.
* syscall.c: Likewise.
[AARCH64]: Define struct arm_pt_regs and ARM_* macros.
[SPARC]: Include <asm/psr.h>.
[SPARC64]: Include <asm/psrcompat.h>.
* signal.c: Include "regs.h".
Do not include <sys/user.h> and <sys/reg.h>.
[IA64]: Do not include <asm/ptrace_offsets.h>.
* strace.c [IA64]: Do not include <asm/ptrace_offsets.h>.
This fixes an obvious typo which prints "lock" instead of "getpeername"
for the getpeername syscall.
* linux/hppa/syscallent.h (getpeername): Change sys_name to "getpeername".
Historically, only 16 bits (8-bit number and 8-bit type) of 32-bit ioctl
commands were used for decoding, which was the source for numerous
annoying collisions like this:
ioctl(0, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, MGSL_IOCGPARAMS or MMTIMER_GETRES or MTIOCTOP or SNDCTL_MIDI_MPUMODE, 0x7fffd47f7338) = -1 ENOTTY (Inappropriate ioctl for device)
The solution is to use all 32 bits for decoding, not just "number" and
"type", but also "size" and "direction".
As some architectures override defaults that come from asm-generic/ and
provide alternative definitions for some ioctl commands, we support
per-architecture ioctl definitions and merge them with common
definitions at build time. During the merge, we used to keep both
generic and architecture-specific definitions, now architecture-specific
definitions have precedence over generic ones -- ioctlsort omits
definitions from asm-generic/ for those ioctl names that have different
definitions in asm/.
Additional bits of "direction" are architecture specific -- the number
of bits and their values differ between architectures. To reduce
architecture differences in the source code, we keep "direction" in
symbolic form and compile it in ioctlsort.
Additional bits of "size" are also architecture specific -- not only the
number of bits differ between architectures, but sizes of many types
depend on sizeof(long). To reduce architecture differences in the
source code, we keep 32-bit and 64-bit versions of common ioctl
definitions, and use the appropriate version for each architecture and
personality.
To implement this, the tools for generating ioctl definitions from
kernel headers have been rewritten, and the source format of ioctl
definitions has been extended. The final ioctlent*.h files that are
included by syscall.c are now generated from source ioctls_inc*.h and
ioctls_arch*.h files at build time with ioctlsort.
* ioctl.c (ioctl_lookup): Use all 32 bits of ioctl command code.
* ioctlsort.c: Rewritten.
* linux/32/ioctls_inc.h: New file.
* linux/64/ioctls_inc.h: New file.
* linux/aarch64/ioctls_arch0.h: New file.
* linux/aarch64/ioctls_arch1.h: New file.
* linux/aarch64/ioctls_inc0.h: New file.
* linux/aarch64/ioctls_inc1.h: New file.
* linux/alpha/ioctls_arch0.h: New file.
* linux/alpha/ioctls_inc0.h: New file.
* linux/arc/ioctls_arch0.h: New file.
* linux/arc/ioctls_inc0.h: New file.
* linux/arm/ioctls_arch0.h: New file.
* linux/arm/ioctls_inc0.h: New file.
* linux/avr32/ioctls_arch0.h: New file.
* linux/avr32/ioctls_inc0.h: New file.
* linux/bfin/ioctls_arch0.h: New file.
* linux/bfin/ioctls_inc0.h: New file.
* linux/hppa/ioctls_arch0.h: New file.
* linux/hppa/ioctls_inc0.h: New file.
* linux/i386/ioctls_arch0.h: New file.
* linux/i386/ioctls_inc0.h: New file.
* linux/ia64/ioctls_arch0.h: New file.
* linux/ia64/ioctls_inc0.h: New file.
* linux/m68k/ioctls_arch0.h: New file.
* linux/m68k/ioctls_inc0.h: New file.
* linux/metag/ioctls_arch0.h: New file.
* linux/metag/ioctls_inc0.h: New file.
* linux/microblaze/ioctls_arch0.h: New file.
* linux/microblaze/ioctls_inc0.h: New file.
* linux/mips/ioctls_arch0.h: New file.
* linux/mips/ioctls_inc0.h: New file.
* linux/or1k/ioctls_arch0.h: New file.
* linux/or1k/ioctls_inc0.h: New file.
* linux/powerpc/ioctls_arch0.h: New file.
* linux/powerpc/ioctls_inc0.h: New file.
* linux/powerpc64/ioctls_arch0.h: New file.
* linux/powerpc64/ioctls_arch1.h: New file.
* linux/powerpc64/ioctls_inc0.h: New file.
* linux/powerpc64/ioctls_inc1.h: New file.
* linux/s390/ioctls_arch0.h: New file.
* linux/s390/ioctls_inc0.h: New file.
* linux/s390x/ioctls_arch0.h: New file.
* linux/s390x/ioctls_inc0.h: New file.
* linux/sh/ioctls_arch0.h: New file.
* linux/sh/ioctls_inc0.h: New file.
* linux/sh64/ioctls_arch0.h: New file.
* linux/sh64/ioctls_inc0.h: New file.
* linux/sparc/ioctls_arch0.h: New file.
* linux/sparc/ioctls_inc0.h: New file.
* linux/sparc64/ioctls_arch0.h: New file.
* linux/sparc64/ioctls_arch2.h: New file.
* linux/sparc64/ioctls_inc0.h: New file.
* linux/sparc64/ioctls_inc2.h: New file.
* linux/tile/ioctls_arch0.h: New file.
* linux/tile/ioctls_arch1.h: New file.
* linux/tile/ioctls_inc0.h: New file.
* linux/tile/ioctls_inc1.h: New file.
* linux/x32/ioctls_arch0.h: New file.
* linux/x32/ioctls_arch1.h: New file.
* linux/x32/ioctls_inc0.h: New file.
* linux/x32/ioctls_inc1.h: New file.
* linux/x86_64/ioctls_arch0.h: New file.
* linux/x86_64/ioctls_arch1.h: New file.
* linux/x86_64/ioctls_inc0.h: New file.
* linux/x86_64/ioctls_inc1.h: New file.
* linux/xtensa/ioctls_arch0.h: New file.
* linux/xtensa/ioctls_inc0.h: New file.
* linux/aarch64/ioctlent.h.in: Remove.
* linux/aarch64/ioctlent1.h: Remove.
* linux/alpha/ioctlent.h.in: Remove.
* linux/arc/ioctlent.h.in: Remove.
* linux/arm/ioctlent.h.in: Remove.
* linux/avr32/ioctlent.h.in: Remove.
* linux/bfin/ioctlent.h.in: Remove.
* linux/hppa/ioctlent.h.in: Remove.
* linux/i386/ioctlent.h.in: Remove.
* linux/ia64/ioctlent.h.in: Remove.
* linux/ioctlent.h.in: Remove.
* linux/ioctlent.sh: Remove.
* linux/m68k/ioctlent.h.in: Remove.
* linux/metag/ioctlent.h.in: Remove.
* linux/microblaze/ioctlent.h.in: Remove.
* linux/mips/ioctlent.h.in: Remove.
* linux/mips/ioctlent.sh: Remove.
* linux/or1k/ioctlent.h.in: Remove.
* linux/powerpc/ioctlent.h.in: Remove.
* linux/powerpc64/ioctlent.h: Remove.
* linux/powerpc64/ioctlent1.h: Remove.
* linux/s390/ioctlent.h.in: Remove.
* linux/s390x/ioctlent.h.in: Remove.
* linux/sh/ioctlent.h.in: Remove.
* linux/sh64/ioctlent.h.in: Remove.
* linux/sparc/ioctlent.h.in: Remove.
* linux/sparc64/ioctlent.h.in: Remove.
* linux/sparc64/ioctlent2.h: Remove.
* linux/tile/ioctlent.h.in: Remove.
* linux/tile/ioctlent1.h: Remove.
* linux/x32/ioctlent.h.in: Remove.
* linux/x32/ioctlent1.h: Remove.
* linux/x86_64/ioctlent.h.in: Remove.
* linux/x86_64/ioctlent1.h: Remove.
* linux/xtensa/ioctlent.h.in: Remove.
* linux/x86_64/ioctlent2.h: Include ioctlent0.h instead of ioctlent.h.
* syscall.c (struct_ioctlent ioctlent0): Likewise.
* Makefile.am: Remove all ioctlent-related definitions.
Define the list of ioctlent*.h files that have to be generated by
presence of $(srcdir)/$(OS)/$(ARCH)/ioctls_inc*.h files.
Add rules for ioctlent*.h files generation.
(EXTRA_DIST): Update.
* maint/ioctls_gen.sh: New file.
* maint/ioctls_hex.sh: New file.
* maint/ioctls_sym.sh: New file.
* maint/print_ioctlent.c: New file.
* HACKING-scripts: Update for ioctlent.sh -> ioctls_gen.sh migration.
* .gitignore: Add ioctlent[012].h and ioctls_all[012].h.
* configure.ac (AC_CHECK_HEADERS): Add linux/hiddev.h
and linux/mmtimer.h for tests.
* tests/ioctl.c: New file.
* tests/ioctl.test: New test.
* tests/Makefile.am (check_PROGRAMS): Add ioctl.
(TESTS): Add ioctl.test.
* tests/.gitignore: Add ioctl.
Most architectures supported by strace have their own subdirectory in
linux directory, but powerpc64 didn't, causing inconveniences.
* configure.ac (arch): Define to "powerpc64" on powerpc64.
* linux/powerpc/errnoent1.h: Move to linux/powerpc64/.
* linux/powerpc/ioctlent1.h: Likewise.
* linux/powerpc/signalent1.h: Likewise.
* linux/powerpc/syscallent1.h: Likewise.
* linux/powerpc64/ioctlent.h: New file.
* linux/powerpc64/syscallent.h: Likewise.
* linux/powerpc64/userent.h: Likewise.
* Makefile.am (EXTRA_DIST): Remove linux/powerpc/ioctlent1.h,
linux/powerpc/syscallent1.h, linux/powerpc/errnoent1.h, and
linux/powerpc/signalent1.h; added linux/powerpc64/errnoent1.h,
linux/powerpc64/ioctlent.h, linux/powerpc64/ioctlent1.h,
linux/powerpc64/signalent1.h, linux/powerpc64/syscallent.h,
linux/powerpc64/syscallent1.h, and linux/powerpc64/userent.h.
ioctlent.sh looks for ioctl command names using grep, and fetches them
with their definitions using sed. Historically, lookup regexps used in
grep and sed are slightly different, which makes the script more
complicated than necessary.
Starting with commit v4.9-27-g3e252ca, header file names should not be
part of ioctlent files included by syscall.c
* linux/sparc/ioctlent1.h: Remove ioctl header file names.
* linux/sparc64/ioctlent2.h: Remove all entries, include "ioctlent.h".
According to linux/arch/s390/include/uapi/asm/unistd.h, readdir is
defined both on s390 and s390x, while getrlimit, _llseek, sendfile64,
and fadvise64_64 are defined on s390 only.
* linux/s390x/syscallent.h (readdir): Add.
(getrlimit, _llseek, sendfile64, fadvise64_64): Remove.
Since arc/syscallent.h, metag/syscallent.h, or1k/syscallent.h, and
tile/syscallent1.h share a lot of identical syscall entries described in
<asm-generic/unistd.h>, move these entries to a new file 32/syscallent.h
using the following automated conversion with subsequent correction of
whitespace indentation:
sed -e 's|^[[:space:]]*\({[^}]\+},\)[[:space:]]*/\*[[:space:]]\([[:space:]]*[0-9]\+\)[[:space:]]*\*/|[\2] = \1|' -e '/^[[:space:]]*\[[[:space:]]*2\(4[4-9]\|5[0-9]\)/d' linux/arc/syscallent.h
* linux/32/syscallent.h: New file.
* Makefile.am (EXTRA_DIST): Add it.
* linux/arc/syscallent.h: Include "32/syscallent.h",
remove generic 32-bit syscall entries, use designated initializers.
* linux/metag/syscallent.h: Likewise.
* linux/or1k/syscallent.h: Likewise.
* linux/tile/syscallent1.h: Likewise.
* linux/s390/syscallent.h (fadvise64, fadvise64_64): Change sys_func to
printargs until special parsers for 31-bit 31 s390 emulation wrappers
are written.
Since aarch64/syscallent1.h and tile/syscallent.h share a lot of
identical syscall entries described in <asm-generic/unistd.h>, move
these entries to a new file 64/syscallent.h using the following
automated conversion with subsequent correction of whitespace
indentation:
sed -e 's|^[[:space:]]*\({[^}]\+},\)[[:space:]]*/\*[[:space:]]\([[:space:]]*[0-9]\+\)[[:space:]]*\*/|[\2] = \1|' -e '/^\[[[:space:]]*2\(4[4-9]\|5[0-9]\)\]/d' linux/tile/syscallent.h
* linux/64/syscallent.h: New file.
* Makefile.am (EXTRA_DIST): Add it.
* linux/aarch64/syscallent1.h: Include "64/syscallent.h",
remove generic 64-bit syscall entries, use designated initializers.
* linux/tile/syscallent.h: Likewise.
Reserve the same space for new syscalls on EABI as it is already
reserved on OABI.
* linux/arm/syscallent.h [__ARM_EABI__] (ARM_FIRST_SHUFFLED_SYSCALL):
Raise to 400.
indirect_ipccall used to guess whether currently decoded ipc syscall is
an indirect subcall or not based on generic knowledge, while there is a
robust method to identify indirect ipc subcalls.
* defs.h (TRACE_INDIRECT_SUBCALL): New flag.
* ipc.c (indirect_ipccall): Check it.
* linux/subcall.h: Set it.
Syscall entries for socket and ipc subcalls are the same on all
architectures, or at least they should be the same, so move them
to the single file.
* linux/subcall.h: Add syscall entries for socket and ipc subcalls.
* linux/arm/syscallent.h: Remove entries for socket and ipc subcalls.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
Before this change, ioctlent.sh could not recognize unusual constants
defined by linux/aufs_type.h, resulting to ioctls.h with references to
these constants without appropriate definitions in ioctldefs.h.
* linux/ioctlent.sh: Update the regexp that is used to lookup constants
referenced by generated ioctls.h.
This change extends -yy option to handle unix domain sockets:
their peer addresses will be printed, similar to inet sockets.
For a listening socket, its socket inode and socket path are printed.
For an accepted socket, its socket inode, the peer inode, and the
socket path are printed.
For a client socket, its socket inode and the peer inode are printed.
An example of a server side communication using netcat:
$ ./strace -yy -e network nc -l -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
setsockopt(3<UNIX:[14728348]>, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
bind(3<UNIX:[14728348]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
listen(3<UNIX:[14728348,"/tmp/example.sock"]>, 10) = 0
accept(3<UNIX:[14728348,"/tmp/example.sock"]>, {sa_family=AF_LOCAL, NULL}, [2]) = 4<UNIX:[14727246->14727245,"/tmp/example.sock"]>
recvfrom(4<UNIX:[14727246->14727245,"/tmp/example.sock"]>, "INPUT\n", 8192, 0, NULL, NULL) = 6
INPUT
An example of a client side communication using netcat:
$ ./strace -yy -e network nc -U /tmp/example.sock
socket(PF_LOCAL, SOCK_STREAM, 0) = 3
connect(3<UNIX:[14727245]>, {sa_family=AF_LOCAL, sun_path="/tmp/example.sock"}, 19) = 0
getsockopt(3<UNIX:[14727245]>, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
INPUT
...
sendto(3<UNIX:[14727245->14727246]>, "INPUT\n", 6, 0, NULL, 0) = 6
* linux/unix_diag.h: New file.
* socketutils.c (send_query): Rename to inet_send_query.
(parse_response): Rename to inet_parse_response.
(unix_print, unix_send_query, unix_parse_response): New functions.
(receive_responses): Add a new argument named parser: a function for
handling protocol specific data parts of diag messages.
(print_sockaddr_by_inode): Call unix_print.
Replace NETLINK_INET_DIAG with NETLINK_SOCK_DIAG, they are equal
but NETLINK_SOCK_DIAG looks more generic.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Convert parsers of these syscalls to the same scheme as were applied to
parsers of other uid/gid related syscalls.
That is, define two sets of parsers on architectures that support
(either directly or via multiarch) 16-bit and 32-bit gid getgroups
and setgroups syscalls simultaneously, and reuse essentially the same
code by parametrizing uid_t and names of parser functions.
* groups.c: Remove.
(sys_getgroups, sys_setgroups): Move ...
* uid.c: ... here and parametrize their names.
* Makefile.am (strace_SOURCES): Remove groups.c.
* linux/syscall.h (sys_getgroups32, sys_setgroups32): Remove.
[NEED_UID16_PARSERS] (sys_getgroups16, sys_setgroups16): New prototypes.
* linux/arm/syscallent.h: Rename sys_[gs]etgroups to sys_[gs]etgroups16,
rename sys_[gs]etgroups32 to sys_[gs]etgroups.
* linux/bfin/syscallent.h: Likewise.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
* tests/uid.c: Test for getgroups.
* tests/uid16.c: Likewise.
* tests/uid32.c: Test for getgroups32.
* tests/uid.awk: Test for getgroups/getgroups32 decoding.
* tests/uid.test: Trace getgroups/getgroups32 syscalls.
Define two sets of parsers on architectures that support (either
directly or via multiarch) 16-bit and 32-bit uid/gid syscalls
simultaneously. Since the code in these two sets is essentially
the same and the key difference between them is the size of uid_t,
implement it by parametrizing uid_t and names of parser functions.
* defs.h (NEED_UID16_PARSERS): New macro.
* linux/syscall.h [NEED_UID16_PARSERS] (sys_chown16, sys_fchown16,
sys_getresuid16, sys_getuid16, sys_setfsuid16, sys_setresuid16,
sys_setreuid16, sys_setuid16): New prototypes.
* linux/dummy.h (sys_geteuid16): Alias to sys_getuid16.
(sys_getegid16, sys_getgid16, sys_getresgid16, sys_setfsgid16,
sys_setgid16, sys_setregid16, sys_setresgid16): Alias to corresponding
sys_*uid16 functions.
* uid.c: Stop including <asm/posix_types.h>.
Parametrize uid_t and names of all exported functions.
(get_print_uid): New function.
(sys_getresuid): Use it.
(printuid): Check for (uid_t) -1.
* uid16.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* linux/arm/syscallent.h: Use sys_chown16, sys_fchown16, sys_getegid16,
sys_geteuid16, sys_getgid16, sys_getresgid16, sys_getresuid16,
sys_getuid16, sys_setfsgid16, sys_setfsuid16, sys_setgid16,
sys_setregid16, sys_setresgid16, sys_setresuid16, sys_setreuid16,
and sys_setuid16 parsers for *chown and [gs]et*[gu]id syscall entries.
* linux/bfin/syscallent.h: Likewise.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* tests/uid16.c: New file.
* tests/uid16.test: New test.
* tests/Makefile.am (CHECK_PROGRAMS): Add uid16.
(TESTS): Add uid16.test.
* tests/.gitignore: Add uid16.
* linux/sh/syscallent.h: Replace printargs with real syscall
parsers in *chown32 and [gs]et*[gu]id32 syscall entries.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Add "32" suffix to names
of [gs]etres[gu]id32 syscalls #108..112.
Fix entry for syscall #112 from setresgid32 to setregid32.
Since parsers for setdomainname and sethostname syscalls are identical,
replace sys_setdomainname with an alias to sys_sethostname.
* linux/dummy.h (sys_setdomainname): Alias to sys_sethostname.
* linux/syscall.h (sys_setdomainname): Remove.
* process.c (sys_setdomainname): Remove.
Since parsers for getpeername and getsockname syscalls are identical,
replace sys_getpeername with an alias to sys_getsockname.
* linux/dummy.h (sys_getpeername): Alias to sys_getsockname.
* linux/syscall.h (sys_getpeername): Remove.
* net.c (sys_getpeername): Remove.
Since parsers for stime and time syscalls are identical,
replace sys_stime with an alias to sys_time.
* linux/dummy.h (sys_stime): Alias to sys_time.
* linux/syscall.h (sys_stime): Remove.
* time.c (sys_stime): Remove.
Special parsers for mkdir and mkdirat are redundant because
sys_chmod and sys_fchmodat implement the same decoding.
* file.c (decode_mkdir, sys_mkdir, sys_mkdirat): Remove.
* linux/dummy.h (sys_mkdir): Alias to sys_chmod.
(sys_mkdirat): Alias to sys_fchmodat.
* linux/syscall.h (sys_mkdir, sys_mkdirat): Remove.
* pathtrace.c (pathtrace_match): Do not check for sys_mkdirat.
There are two important changes in here:
1. EWOULDBLOCK has been up to kernel 3.14 errorcode #246. Since hppa
folks had problems with EWOULDBLOCK != EAGAIN, this was changed in
kernel 3.14.
2. Starting with kernel 3.18, hppa folks changed some signal numbers in
such a way that we end up with SIGRTMIN == 32, which brings hppa in sync
with other linux ports.
Both were incompatible changes which basically broke hppa ABI, but since
they have been merged into the kernel, we have to follow.
For two ioctl entries with the same code, if one's name is a prefix
to another's name, keep the entry with a shorter name. Filter out
redundant ioctl entries at ioctlsort stage so that distributed
ioctlent.h.in files will be already filtered.
* linux/ioctlsort.c (is_not_prefix): New function.
(main): Use it.
* linux/ioctlent-filter.awk: Remove.
* Makefile.am (EXTRA_DIST): Remove linux/ioctlent-filter.awk.
($(ioctlent_h)): Don't use linux/ioctlent-filter.awk.
When two ore more -y options are given, print local and remote ip:port
pairs associated with socket descriptors. This implementation uses
NETLINK_INET_DIAG for sockaddr lookup; it's based on the patch
prepared by Zubin Mithra as a part of his GSoC 2014 strace project.
* Makefile.am (strace_SOURCES): Add socketutils.c
(EXTRA_DIST): Add linux/inet_diag.h and linux/sock_diag.h.
* defs.h (print_sockaddr_by_inode): New prototype.
* linux/inet_diag.h: New file.
* linux/sock_diag.h: Likewise.
* socketutils.c: Likewise.
* strace.1: Document -yy option.
* strace.c (usage): Likewise.
* util.c (printfd): Use print_sockaddr_by_inode.
When the preadv/pwritev syscalls were added, the ones before it in the
ia64 list were missed, so all the syscalls there and later were not in
the right location (causing things to be decoded incorrectly).
Add the missing syscalls before preadv which also re-aligns all the
syscalls after that point. This fixes the uio.test.
* linux/ia64/syscallent.h: Add syscalls 1310 through 1318.
Both these arches have a rt_sigaction syscall that takes 5 args, not 4.
* linux/alpha/syscallent.h (rt_sigaction): Change nargs to 5.
* linux/sparc/syscallent.h (rt_sigaction): Change nargs to 5.
Starting in 3.16, these two syscalls have gotten their own entry
point for x32. See linux 7fd44dacdd803c0bbf38bf478d51d280902bb0f1.
* linux/x32/syscallent.h: Change existing io_{setup,submit} to 64bit,
and add new entry points for x32 specifically.
Add SE flag to execve, exit, and exit_group syscall entries.
Add SI flag to brk, execve, mmap, mprotect, mremap, munmap,
remap_file_pages, shmat, and shmdt syscall entries.
The patch originally submitted by Ezequiel García was OK, but I somehow
managed to mangle it so that most of the patch was not applied.
According to Ezequiel García, an architecture port based on the generic
syscall ABI is in progress.
This reverts commit 61e426e87a.
This commit adds strace support for Altera's Nios-II official
kernel port as found in git://git.rocketboards.org/linux-socfpga.git
Notice that this an out-of-tree kernel architectural port, and uses the
legacy (non-generic) system call ABI. In particular, the port doesn't
support PTRACE_GETREGSET, so the implementation is based on PTRACE_GETREGS.
Given it's mandatory for new architectures to support the generic
syscall ABI and PTRACE_GETREGSET, if the nios2 architecure is ever
mainlined, the strace support will have to be re-factored accordingly.
* linux/nios2/ioctlent.h.in: New file.
* linux/nios2/syscallent.h: Likewise.
* Makefile.am (EXTRA_DIST): Add linux/nios2/ioctlent.h.in and
linux/nios2/syscallent.h.
* configure.ac: Add NIOS2 to the list of supported architectures.
* defs.h [NIOS2]: Use register reading system.
* process.c (struct_user_offsets): Add NIOS2 support.
* syscall.c (get_regs, get_scno, get_syscall_args,
get_syscall_result, get_error): Likewise.
* util.c (change_syscall): Likewise.
* mem.c (sys_getpagesize): Define on NIOS2.
* system.c [NIOS2] (sys_cacheflush, sys_nios2cmpxchg): New functions.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Take #2 on mainlining strace support for ARC (last one was 4.6 based back
in March 2011), see
http://sourceforge.net/p/strace/mailman/message/27210168/
The syscall ABI is asm-generic/unistd.h based (so no legacy syscalls),
hence very similar to metag port.
test/* all seem to work well.
* linux/arc/ioctlent.h.in: New file.
* linux/arc/syscallent.h: Likewise.
* Makefile.am (EXTRA_DIST): Add linux/arc/ioctlent.h.in and
linux/arc/syscallent.h.
* configure.ac: Add ARC to the list of supported architectures.
* defs.h: Add ARC support.
* process.c (struct_user_offsets): Likewise.
* signal.c (sys_sigreturn): Likewise.
* syscall.c (print_pc, get_regset, get_regs, get_scno, get_syscall_args,
get_syscall_result, get_error): Likewise.
* util.c (change_syscall): Likewise.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
* file.c (sync_file_range_flags): New xlat structure.
(sys_sync_file_range, sys_sync_file_range2): New functions.
* linux/syscall.h (sys_sync_file_range, sys_sync_file_range2): New
prototypes.
* linux/dummy.h (sys_sync_file_range, sys_sync_file_range2): Remove.
* linux/mips/syscallent-o32.h: Set the number of sync_file_range
arguments to 7.
The fanotify_mark func takes a 64bit mask, so 32bit arches have to split
it up into two fields. When the syscall was added, it was listed as only
having 5 fields total (since that's correct for 64bit systems).
* linux/arm/syscallent.h: Set the number of fanotify_mark arguments to 6.
* linux/bfin/syscallent.h: Likewise.
* linux/hppa/syscallent.h: Likewise.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/metag/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Likewise.
* linux/mips/syscallent-o32.h: Likewise.
* linux/or1k/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/sparc/syscallent.h: Likewise.
* linux/tile/syscallent1.h: Likewise.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
* linux/avr32/syscallent.h: Set the number of sync_file_range arguments
to 6.
* linux/bfin/syscallent.h: Likewise.
* linux/hppa/syscallent.h: Likewise.
* linux/i386/syscallent.h: Likewise.
* linux/m68k/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Likewise.
* linux/mips/syscallent-o32.h: Likewise.
* linux/or1k/syscallent.h: Likewise.
* linux/s390/syscallent.h: Likewise.
* linux/sh/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Change sync_file_range to
sync_file_range2, set the number of sync_file_range2 arguments to 6.
* linux/tile/syscallent.h: Change sync_file_range to sync_file_range2,
set the number of sync_file_range2 arguments to 4.
* linux/tile/syscallent1.h: Change sync_file_range to sync_file_range2.
update handler.
* linux/xtensa/syscallent.h: Likewise.
The raw llseek syscall is called _llseek from userland, so fix the
naming of it for metag to allow the stat test to pass.
* linux/metag/syscallent.h: Rename llseek syscall to _llseek.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
The metag architecture also uses dedicated syscalls and doesn't need to
multiplex ipc and socket subcalls.
* linux/syscall.h [METAG]: Do not define SYS_socket_subcall and
SYS_ipc_subcall.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
The number of pread and pwrite arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned
32bit it equals to 5, and for aligned 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of pread and pwrite
arguments to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/or1k/syscallent.h: Change the number of pread and pwrite
arguments to 5.
The number of preadv and pwritev arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned 32bit
it equals to 5, and for aligned 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of preadv and pwritev
arguments to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/ia64/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/powerpc/syscallent.h: Change the number of preadv and pwritev
arguments to 6.
* linux/sh/syscallent.h: Likewise.
* linux/xtensa/syscallent.h: Likewise.
The number of ftruncate64/truncate64 arguments depends on architecture
and personality. For 64bit and ilp32 it equals to 2, for unaligned
32bit it equals to 3, and for aligned 32bit it equals to 4.
* linux/or1k/syscallent.h: Change the number of ftruncate64 and
truncate64 arguments to 3.
* linux/sh/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Change ftruncate64 and truncate64 handlers.
* linux/sparc/syscallent.h: Change ftruncate64 handler, change the
number of its arguments to 3.
* linux/xtensa/syscallent.h: Change the number of ftruncate64 and
truncate64 arguments to 4.
The number of fallocate arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4,
for 32bit it equals to 6.
* linux/aarch64/syscallent1.h: Change the number of fallocate arguments
to 4.
* linux/alpha/syscallent.h: Likewise.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/microblaze/syscallent.h: Set fallocate handler and flags.
The number of fadvise64 arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 4, for unaligned
32bit it equals to 5, and for aligned 32bit it equals to 6.
The number of fadvise64_64 arguments is 4 for 64bit and ilp32, for
unaligned 32bit and most of aligned 32bit it equals to 6, and for
mips o32 it equals to 7.
* linux/alpha/syscallent.h: Set fadvise64 handler.
* linux/s390/syscallent.h: Likewise.
* linux/hppa/syscallent.h: Set fadvise64_64 handler, change the number
of syscall arguments to 6.
* linux/ia64/syscallent.h: Change the number of fadvise64 arguments
to 4.
* linux/mips/syscallent-n32.h: Likewise.
* linux/tile/syscallent1.h: Change the number of fadvise64 arguments
to 5.
* linux/mips/syscallent-o32.h: Change the number of fadvise64_64
arguments to 7.
* linux/s390x/syscallent.h: Change fadvise64_64 handler. Set fadvise64
handler. Change numbers of fadvise64 and fadvise64_64 arguments to 4.
* linux/sh64/syscallent.h: Change fadvise64_64 handler.
Change numbers of fadvise64 and fadvise64_64 arguments to 4.
* linux/sparc/syscallent.h: Set fadvise64 and fadvise64_64 handlers,
change numbers of their arguments to 5 and 6.
* linux/x86_64/syscallent.h: Change fadvise64 handler.
linux/mips/syscallent.h consisted of several parts that had little in
common. Split them into separate files to ease maintenance.
* linux/mips/syscallent-compat.h: New file.
* linux/mips/syscallent-n32.h: Likewise.
* linux/mips/syscallent-n64.h: Likewise.
* linux/mips/syscallent-o32.h: Likewise.
* linux/mips/syscallent.h: Include them.
* Makefile.am (EXTRA_DIST): Add them.
The number of readahead arguments depends on architecture and
personality. For 64bit and ilp32 it equals to 3, for unaligned 32bit it
equals to 4, and for aligned 32bit it equals to 5.
* linux/aarch64/syscallent1.h: Set number of readahead arguments to 3.
* linux/alpha/syscallent.h: Likewise.
* linux/ia64/syscallent.h: Likewise.
* linux/s390x/syscallent.h: Likewise.
* linux/sh64/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/or1k/syscallent.h: Set number of readahead arguments to 4.
* linux/sh/syscallent.h: Likewise.
* linux/tile/syscallent.h: Likewise.
* linux/xtensa/syscallent.h: Set number of readahead arguments to 5.
The Xtensa architecture also uses dedicated syscalls and doesn't
need to multiplex ipc and socket subcalls.
* linux/syscall.h [XTENSA]: Do not define SYS_socket_subcall and
SYS_ipc_subcall.
Signed-off-by: Chris Zankel <chris@zankel.net>
The tile arch just has the dedicated syscalls, so disable
the logic for parsing subcalls.
* linux/syscall.h [TILE]: Do not define SYS_socket_subcall and
SYS_ipc_subcall.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
The Blackfin arch does not have a socketcall or ipc subcall
(it has dedicated syscalls broken out), so disable the logic for it.
* linux/syscall.h [BFIN]: Do not define SYS_socket_subcall and
SYS_ipc_subcall.
Been playing with UBI of late and it'd help if I could see what it was
doing. Not entirely sure about the decoding of UBI_IOCVOLUP -- it takes
a pointer to a 64bit value, not a strict.
* util.c (MAX, MIN): Move to ...
* defs.h (MAX, MIN): ... here.
(CLAMP): Define.
(ubi_ioctl): New prototype.
* ioctl.c (ioctl_decode): Call ubi_ioctl when code is 'o' or 'O'.
* mtd.c: Include ubi user API header.
(ubi_volume_types): New enum decode.
(ubi_volume_props): Likewise.
(ubi_ioctl): Define.
* linux/ubi-user.h: Import from linux 3.8.
* linux/ia64/syscallent.h: Undefine sys_oldlstat, sys_lstat and
sys_lstat64 before redefining them to printargs.
Reported-by: Mike Frysinger <vapier@gentoo.org>
* desc.c (printflock) [X32]: Add special handling required for
this architecture with sizeof(long) < sizeof(off_t).
* file.c [X32] (struct stat64): Add __attribute__((packed)).
[X32] (HAVE_STAT64): Define.
(printstat) [X32]: Redirect to printstat64.
(printstat64) [X32]: Use "struct stat" instead of "struct stat64".
[X32] (realprintstat64): Rename to printstat64_x32.
(sys_stat64, sys_fstat64) [X32]: Remove second definitions of these
functions. Call printstat64_x32 instead of printstat64
* linux/x32/syscallent.h: Fix handlers for truncate and ftruncate.
The file linux/ioctlent.h is generated in the build directory, so
"../ioctlent.h" won't find it.
* linux/aarch64/ioctlent1.h: Remove "../" from include file name.
* linux/powerpc/ioctlent1.h: Likewise.
* linux/tile/ioctlent1.h: Likewise.
* linux/x32/ioctlent1.h: Likewise.
* linux/x86_64/ioctlent1.h: Likewise.
* linux/x86_64/ioctlent2.h: Likewise.
Signed-off-by: Andreas Schwab <schwab@suse.de>
sendfile parser used to decode off_t* parameter as a pointer to host
off_t type. With this change, it is decoded as a pointer to target long
type.
* io.c (print_off_t): New function.
(sys_sendfile): Use it.
* linux/aarch64/syscallent1.h: Use sys_sendfile64 for sendfile decoding.
* linux/tile/syscallent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/syscallent.h: Likewise.
* linux/hppa/syscallent.h: Use sys_sendfile64 for sendfile64 decoding.
* linux/metag/syscallent.h: Correct sendfile syscall name.
* linux/or1k/syscallent.h: Likewise.
or1k was missing TM on many memory-related syscalls
sys_lookup_dcookie is 3-arg on 64-bit arches, and isn't TF
sys_recvmsg is 3-arg on all arches
sys_nfsservctl is 3-arg on all arches
sys_timerfd_create is 2-arg on all arches
sys_[f]truncate64 is 4-arg or 3-arg, never 5-arg
truncate64 is TF
sys_[l]lseek is TD
fstat[64] is TD
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for Imagination Technologies Meta architecture (the
architecture/ABI is usually referred to as metag in code). The Meta
Linux kernel port is in the process of being upstreamed for v3.9 so it
uses generic system call numbers.
sys_lookup_dcookie writes a filename to buffer argument, so I've set
TF flag.
nfsservctl appears to be set to sys_ni_syscall in asm-generic/unistd.h
so I've left it blank.
truncate64/ftruncate64/pread64/pwrite64/readahead have unaligned 64bit
args which are packed tightly on metag, so less arguments on metag.
fchdir/llseek takes a file descriptor so s/TF/TD/
sync_file_range has 2 64bit args so uses 6 args, so s/4/6/
timerfd_create/msgget/msgctl/msgrcv/semget/segtimedop/semop/shmget/
shmctl/shmat/shmdt/recvmsg/migrate_pages have different number of args.
oldgetrlimit is just getrlimit for metag.
add TM flag to various memory syscalls.
metag doesn't directly use sys_mmap_pgoff for mmap2.
prlimit64/process_vm_readv/process_vm_writev take a pid so add TP flag.
fanotify_init doesn't appear to take a file descriptor so remove TD.
Add kcmp syscall.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Christian Svensson <blue@cmd.nu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ARM in fact _is_ one personality.
We had two personalities for it because it has a handful of
syscalls with huge scnos (0x000f00xx).
Extending syscall table to have [0x000f0005] index is of course
not a good idea.
Someone decided to handle that by having a separate personality
just for these syscalls.
But multi-personality arch does a bit more work in other parts.
This patch is another alternative: "move" 0x000f00nn syscalls
down to the entries just above last ordinary syscall,
by manipulating scno if it falls into the 0x000f00xx range.
In order to not worsen genuine undefined scnos' printing,
the code remaps scno back to actual value before printing
"syscall_NNN" string.
* defs.h: Remove multi-reprsonality defines from ARM.
* syscall.c (shuffle_scno): New function.
(undefined_scno_name): New function.
(get_scno): [ARM] Replace personality setting with scno shuffling.
(trace_syscall_entering): Print unknown syscall name using
undefined_scno_name().
(trace_syscall_exiting): Likewise.
* linux/arm/syscallent.h: Add ARM specific syscalls at the end.
* linux/arm/errnoent1.h: Deleted.
* linux/arm/ioctlent1.h: Deleted.
* linux/arm/signalent1.h: Deleted.
* linux/arm/syscallent1.h: Deleted.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix some comments which say
"we use i386 syscalls/ioctls/errnos" but in reality
common ones are used.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Previous code merges too many similar, but different ways
of decoding mmap. For example, sys_old_mmap is "params in memory"
API... except SH[64], where it is "params in regs",
i.e. what sys_mmap ("new mmap") function does on other arches!
It's much simpler when every mmap handler has same API regardless
of arch. Where API means whether params are in regs or in memory,
and whether offset is in bytes, pages, or 4k blocks.
Then we just insert correct function pointers into
arch syscall tables.
It turns out there are four common mmap APIs over
all architectures which exist in Linux kernel,
and one outlier for S390.
A number of mmap decoders were plain wrong in arch tables.
For example, BFIN has no old_mmap. It returns ENOSYS.
I checked kernel sources for all arches nad fixed the tables.
There was dead code for x86_64 for old_mmap:
x86_64 has no old_mmap.
* mem.c: Refactor mmap functions so that we have five mmap syscall
handlers, each with the fixed API (not varying by arch).
* pathtrace.c (pathtrace_match): Adjust sys_func == mmap_func checks.
* linux/syscall.h: Declare new mmap syscall handler functions.
* linux/arm/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/avr32/syscallent.h: mmap is sys_mmap_pgoff.
* linux/bfin/syscallent.h: old_mmap is ENOSYS, mmap2 is sys_mmap_pgoff.
* linux/hppa/syscallent.h: mmap2 is sys_mmap_4koff.
* linux/i386/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/ia64/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/m68k/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/microblaze/syscallent.h: old_mmap is sys_mmap, mmap2 is sys_mmap_pgoff.
* linux/mips/syscallent.h: mmap is sys_mmap_4kgoff.
* linux/or1k/syscallent.h: mmap2 is sys_mmap_pgoff.
* linux/powerpc/syscallent.h: mmap2 is sys_mmap_4kgoff.
* linux/s390/syscallent.h: mmap2 is sys_old_mmap_pgoff.
* linux/s390x/syscallent.h: mmap is sys_old_mmap and thus has 1 arg.
* linux/sh/syscallent.h: old_mmap2 is sys_mmap, mmap2 is sys_mmap_4koff.
* linux/sh64/syscallent.h: Likewise.
* linux/sparc/syscallent1.h: mmap is TD|TM.
* linux/tile/syscallent1.h: mmap2 is sys_mmap_4koff.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* linux/mips/syscallent.h: Remove trailing empty elements.
Compactify huge stretches of NULL elements in the middle.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
tilegx support has been in the kernel since 3.0.
In addition, fix some issues with the tilepro support already
present in strace, primarily the decision to use the
<asm/unistd.h> numbering space for system calls.
* defs.h [TILE]: Include <asm/ptrace.h> and provide an extern
struct pt_regs tile_regs for efficiency. Provide compat 32-bit
personality via SUPPORTED_PERSONALITIES, PERSONALITY0_WORDSIZE,
PERSONALITY1_WORDSIZE, and DEFAULT_PERSONALITY.
* linux/tile/errnoent1.h: New file, includes linux/errnoent.h.
* linux/tile/ioctlent1.h: New file, includes linux/ioctlent.h.
* linux/tile/signalent1.h: New file, includes linux/signalent.h.
* linux/tile/syscallent.h: Update with new asm-generic syscalls.
The version previously committed was the from the first tile patch
to LKML, which subsequently was changed to use <asm-generic/unistd.h>.
* linux/tile/syscallent1.h: Copy from linux/tile/syscallent.h.
* mem.c (addtileflags) [TILE]: use %ld properly for a "long" variable.
* process.c [TILE]: Choose clone arguments correctly and properly
suppress all "struct user" related offsets in user_struct_offsets.
* signal.c [TILE]: Use tile_regs not upeek.
* syscall.c (update_personality) [TILE]: Print mode.
(PT_FLAGS_COMPAT) [TILE]: Provide if not in system headers.
(tile_regs) [TILE]: Define 'struct pt_regs' variable to hold state.
(get_regs) [TILE]: use PTRACE_GETREGS to set tile_regs rather than using upeek.
(get_scno) [TILE]: Set personality.
(get_syscall_args) [TILE]: Use tile_regs.
(get_syscall_result) [TILE]: Update tile_regs.
(get_error) [TILE]: Use tile_regs.
(printcall) [TILE]: Print pc.
(arg0_offset, arg1_offset, restore_arg0, restore_arg1) [TILE]:
Properly handle tile call semantics and support tilegx.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* defs.h [AARCH64]: Copy in the definition of arm_pt_regs and the
accessor macros, so it's possible to build on AArch64 without
ARM system headers. Set SUPPORTED_PERSONALITIES to 2.
Define PERSONALITY0_WORDSIZE and PERSONALITY1_WORDSIZE.
Set DEFAULT_PERSONALITY to 1.
* linux/aarch64/errnoent1.h: New file, includes generic errnoent.h.
* linux/aarch64/ioctlent1.h: New file, includes generic ioctlent.h.
* linux/aarch64/signalent1.h: New file, includes generic signalent.h.
* linux/aarch64/syscallent1.h: Rename from linux/aarch64/syscallent.h.
* linux/aarch64/syscallent.h: New file, includes arm/syscallent.h.
* syscall.c [AARCH64]: Define aarch64_regs.
(update_personality) [AARCH64]: Add debug output.
(get_scno) [AARCH64]: Determine if we're in ARM or AArch64 mode by
checking the size of the returned uio structure from PTRACE_GETREGSET
and interpret the structure accordingly.
(get_syscall_result): Likewise.
(get_syscall_args): Merge the AArch64 and ARM sections so that on
AArch64 we can fall back to supporting the ARM personality.
(get_error): Likewise.
Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org>
AArch64 has been included in linux from 3.7 onwards.
Add support for AArch64 in strace, tested on linux in a simulator.
* configure.ac: Support AArch64.
* defs.h [AARCH64]: Include <sys/ptrace.h>, define TCB_WAITEXECVE.
* ipc.c (indirect_ipccall): Support AArch64.
* process.c (struct_user_offsets): Likewise.
* syscall.c [AARCH64]: Include <asm/ptrace.h>, <sys/uio.h>, and
<elf.h>. Define struct user_pt_regs regs.
(get_scno, get_syscall_result): Support AArch64 using PTRACE_GETREGSET.
(get_syscall_args, get_error): Support AArch64.
* linux/aarch64/ioctlent.h.in: New file.
* linux/aarch64/syscallent.h: New file, based on linux 3.7 version of
asm-generic/unistd.h.
Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org>
New definitions match updates in Linux 3.4 and Linux 3.5 respectively.
* linux/errnoent.h (ERRNO_517): Change to EPROBE_DEFER.
(ERRNO_518): Change to EOPENSTALE.
Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org>
Since someone can invoke these entry points directly with syscall(),
at least decode their name and show that they're 64bit versions rather
than just showing syscall_###.
* linux/x32/syscallent.h: Sync all missing entries below 312 with x86_64.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Starting with linux 3.6 (and backported to earlier kernels), these two
syscalls have changed numbers (moving from native to compat entry points).
Update the strace syscall list accordingly.
* linux/x32/syscallent.h: Move setsockopt from 54 to 541, and move
getsockopt from 55 to 542.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This syncs with the syscall table as it is in linux 3.4.
* linux/x32/syscallent.h (59): Fix comment typo.
(78): Add missing getdents entry.
(174): Delete create_module entry (not in the kernel).
(181, 182, 183, 184, 185): Add missing entries.
(524, 536, 539, 540): Fix spacing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Makefile.am (EXTRA_DIST): Add linux/x32/errnoent1.h,
linux/x32/ioctlent1.h, linux/x32/signalent1.h and
linux/x32/syscallent1.h.
* configure.ac: Remove AC_GNU_SOURCE, obsoleted by
AC_USE_SYSTEM_EXTENSIONS.
* defs.h (SUPPORTED_PERSONALITIES): Set to 2 for X32.
(PERSONALITY1_WORDSIZE): Set to 4 for X32.
* file.c (stat64): New struct for X32.
(sys_lseek32): New function for X32.
(stat64): Undef.
(sys_fstat64): Likewise.
(sys_stat64): Likewise.
(realprintstat64): New function for X32.
(sys_fstat64): Likewise.
(sys_stat64): Likewise.
* mem.c (sys_old_mmap): New function for X32.
* pathtrace.c (pathtrace_match): Also check sys_old_mmap for X32.
* syscall.c (update_personality): Add X32 support.
(get_scno): Support currpers == 1 for X32.
* linux/syscall.h (sys_lseek32): New function prototype for X32.
* linux/x32/errnoent1.h: New file.
* linux/x32/ioctlent1.h: Likewise.
* linux/x32/signalent1.h: Likewise.
* linux/x32/syscallent1.h: Likewise.
X32 support is added to Linux kernel 3.4. In a nutshell, x32 is x86-64 with
32bit pointers. At system call level, x32 is also identical to x86-64,
as shown by many changes like "defined(X86_64) || defined(X32)". The
main differerence bewteen x32 and x86-64 is off_t in x32 is long long
instead of long.
This patch adds x32 support to strace. Tested on Linux/x32.
* configure.ac: Support X32.
* defs.h: Set SUPPORTED_PERSONALITIES to 3 for X86_64,
Set PERSONALITY2_WORDSIZE to 4 for X86_64.
Add tcb::ext_arg for X32.
* file.c (stat): New for X32.
(sys_lseek): Use 64-bit version for X32.
(printstat64): Check current_personality != 1 for X86_64.
* ipc.c (indirect_ipccall): Check current_personality == 1
for X86_64.
* mem.c (sys_mmap64): Also use tcp->u_arg for X32. Print NULL
for zero address. Call printllval for offset for X32.
* pathtrace.c (pathtrace_match): Don't check sys_old_mmap for
X32.
* process.c (ARG_FLAGS): Defined for X32.
(ARG_STACK): Likewise.
(ARG_PTID): Likewise.
(change_syscall): Handle X32.
(struct_user_offsets): Support X32.
(sys_arch_prctl): Likewise.
* signal.c: Include <asm/sigcontext.h> for X32.
(SA_RESTORER): Also define for X32.
* syscall.c (update_personality): Support X32 for X86_64.
(is_restart_error): Likewise.
(syscall_fixup_on_sysenter): Likewise.
(get_syscall_args): Likewise.
(get_syscall_result): Likewise.
(get_error): Likewise.
(__X32_SYSCALL_BIT): Define if not defined.
(__X32_SYSCALL_MASK): Likewise.
(get_scno): Check DS register value for X32. Use
__X32_SYSCALL_MASK on X32 system calls.
* util.c (printllval): Use ext_arg for X32.
(printcall): Support X32.
(change_syscall): Likewise.
(arg0_offset): Likewise.
(arg1_offset): Likewise.
* Makefile.am (EXTRA_DIST): Add linux/x32/errnoent.h,
linux/x32/ioctlent.h.in, linux/x32/signalent.h,
linux/x32/syscallent.h, linux/x86_64/errnoent2.h,
linux/x86_64/ioctlent2.h, linux/x86_64/signalent2.h and
linux/x86_64/syscallent2.h.
* linux/x32/errnoent.h: New.
* linux/x32/ioctlent.h.in: Likewise.
* linux/x32/signalent.h: Likewise.
* linux/x32/syscallent.h: Likewise.
* linux/x86_64/errnoent2.h: Likewise.
* linux/x86_64/ioctlent2.h: Likewise.
* linux/x86_64/signalent2.h: Likewise.
* linux/x86_64/syscallent2.h: Likewise.
Signed-off-by: H.J. Lu <hongjiu.lu@intel.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I got tired of figuring out mtd structures (which show up a lot
in the embedded space), so add decoders for those ioctls.
* defs.h (mtd_ioctl): New prototype.
(print_loff_t): Likewise.
* io.c (print_loff_t): Delete static keyword
* ioctl.c (ioctl_decode): Call mtd_ioctl when code is 'M'.
* Makefile.am (strace_SOURCES): Add mtd.c.
(EXTRA_DIST): Add linux/mtd-abi.h.
* mtd.c: New file.
* linux/mtd-abi.h: New file.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Undefined syscall looked like this before this change:
{ 5, 0, printargs, "SYS_53" },
That is, "SYS_53" string had to be allocated and stored in strace binary.
Since now SCNO_IN_RANGE() macro requires sysent[scno].sys_func != NULL
for valid syscalls, we can replace printargs with NULL in such lines
and make them "invalid", thus not requiring syscall name string.
Savings on i386:
text data bss dec hex filename
237389 704 18944 257037 3ec0d strace.before
236973 704 18944 256621 3ea6d strace
Savings on mips:
336551 153692 38320 528563 810b3 strace.before
275543 153688 38320 467551 7225f strace
Tested to still decode undefined syscalls correctly (syscall no. 222 on i386).
* linux/*/syscallent.h: Replace 'printargs, "SYS_nnn"' with
'NULL, NULL'.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sys_pwrite seems to do the same thing as sys_pwrite64
which we deleted when we removed non-Linux code.
* linux/mips/syscallent.h: s/sys_pwrite64/sys_pwrite/
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Affected names are "_newselect", "_llseek", "_sysctl".
I see no apparent reason why they have leading underscores.
Moreover, some arches have underscored names and some have
non-underscored ones. This is not consistent.
I verified that every architectire I touched did not have
a similarly named syscall without underscore, thus this change
does not introduce new ambiquities.
I left "_exit" untouched for now, but the same points stand for it too:
some architectures use "exit" and no one complains. So why many
arches are using "_exit"?
* linux/*/syscallent.h: Remove underscores from displayed
syscall names for _newselect, _llseek, _sysctl.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The files not mentioned in changelog below had only
copyright notices fixes and indentation fixes.
* defs.h: Include <stdint.h> and <inttypes.h>.
* file.c: Do not include <inttypes.h>.
Move struct kernel_dirent declaration below top include block.
* block.c: Do not include <stdint.h> and <inttypes.h>.
* quota.c: Likewise.
* desc.c: Likewise.
* signal.c: Likewise.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* linux/dummy.h (sys_rt_tgsigqueueinfo): Remove.
* linux/syscall.h (sys_rt_tgsigqueueinfo): New prototype.
* signal.c (print_sigqueueinfo): New function, based on
sys_rt_sigqueueinfo.
(sys_rt_sigqueueinfo): Use print_sigqueueinfo.
(sys_rt_tgsigqueueinfo): New function.
* linux/dummy.h (sys_sendmmsg): Remove.
* linux/syscall.h (sys_sendmmsg): New prototype.
* net.c (printmmsghdr): Add index argument specifying the element in
mmsghdr array to print.
(decode_mmsg): New function, prints the whole mmsghdr array, its length
and message flags.
(sys_sendmmsg): New function.
(sys_recvmmsg): Use decode_mmsg to fix mmsghdr array decoding.
