iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
046835b4aa
linux/arch/arm/mm/proc-v7-3level.S

161 lines
4.3 KiB
ArmAsm
Raw Normal View History

ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
/*
* arch/arm/mm/proc-v7-3level.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Copyright (C) 2011 ARM Ltd.
* Author: Catalin Marinas <catalin.marinas@arm.com>
* based on arch/arm/mm/proc-v7-2level.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 19:29:12 +04:00
#include <asm/assembler.h>
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
#define TTB_IRGN_NC (0 << 8)
#define TTB_IRGN_WBWA (1 << 8)
#define TTB_IRGN_WT (2 << 8)
#define TTB_IRGN_WB (3 << 8)
#define TTB_RGN_NC (0 << 10)
#define TTB_RGN_OC_WBWA (1 << 10)
#define TTB_RGN_OC_WT (2 << 10)
#define TTB_RGN_OC_WB (3 << 10)
#define TTB_S (3 << 12)
#define TTB_EAE (1 << 31)
/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
#define TTB_FLAGS_UP (TTB_IRGN_WB|TTB_RGN_OC_WB)
#define PMD_FLAGS_UP (PMD_SECT_WB)
/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S)
ARM: LPAE: use phys_addr_t in switch_mm() This patch modifies the switch_mm() processor functions to use phys_addr_t. On LPAE systems, we now honor the upper 32-bits of the physical address that is being passed in, and program these into TTBR as expected. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> [will: fixed up conflict in 3-level switch_mm with big-endian changes] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-16 23:37:06 +04:00
#ifndef __ARMEB__
# define rpgdl r0
# define rpgdh r1
#else
# define rpgdl r1
# define rpgdh r0
#endif
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
*
* Set the translation table base pointer to be pgd_phys (physical address of
* the new TTB).
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
ARM: LPAE: use phys_addr_t in switch_mm() This patch modifies the switch_mm() processor functions to use phys_addr_t. On LPAE systems, we now honor the upper 32-bits of the physical address that is being passed in, and program these into TTBR as expected. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> [will: fixed up conflict in 3-level switch_mm with big-endian changes] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-16 23:37:06 +04:00
mmid r2, r2
asid r2, r2
orr rpgdh, rpgdh, r2, lsl #(48 - 32) @ upper 32-bits of pgd
mcrr p15, 0, rpgdl, rpgdh, c2 @ set TTB 0
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
isb
#endif
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 19:29:12 +04:00
ret lr
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
ENDPROC(cpu_v7_switch_mm)
ARM: 8037/1: mm: support big-endian page tables When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. CC stable <stable@vger.kernel.org> Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-24 06:45:56 +04:00
#ifdef __ARMEB__
#define rl r3
#define rh r2
#else
#define rl r2
#define rh r3
#endif
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
/*
* cpu_v7_set_pte_ext(ptep, pte)
*
* Set a level 2 translation table entry.
* - ptep - pointer to level 3 translation table entry
* - pte - PTE value to store (64-bit in r2 and r3)
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
ARM: 8037/1: mm: support big-endian page tables When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. CC stable <stable@vger.kernel.org> Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-24 06:45:56 +04:00
tst rl, #L_PTE_VALID
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
beq 1f
ARM: 8037/1: mm: support big-endian page tables When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. CC stable <stable@vger.kernel.org> Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-24 06:45:56 +04:00
tst rh, #1 << (57 - 32) @ L_PTE_NONE
bicne rl, #L_PTE_VALID
ARM: mm: introduce present, faulting entries for PAGE_NONE PROT_NONE mappings apply the page protection attributes defined by _P000 which translate to PAGE_NONE for ARM. These attributes specify an XN, RDONLY pte that is inaccessible to userspace. However, on kernels configured without support for domains, such a pte *is* accessible to the kernel and can be read via get_user, allowing tasks to read PROT_NONE pages via syscalls such as read/write over a pipe. This patch introduces a new software pte flag, L_PTE_NONE, that is set to identify faulting, present entries. Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-09-01 08:22:12 +04:00
bne 1f
ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE For LPAE, we have the following means for encoding writable or dirty ptes: L_PTE_DIRTY L_PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writeable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writeable but not dirty. This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58, and adds additional logic to set AP[2] whenever the pte is read only or not dirty. That way we can distinguish between clean writeable ptes and read only ptes. HugeTLB pages will use this new logic automatically. We need to add some logic to Transparent HugePages to ensure that they correctly interpret the revised pgprot permissions (L_PTE_RDONLY has moved and no longer matches PMD_SECT_AP2). In the process of revising THP, the names of the PMD software bits have been prefixed with L_ to make them easier to distinguish from their hardware bit counterparts. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 19:16:15 +04:00
eor ip, rh, #1 << (55 - 32) @ toggle L_PTE_DIRTY in temp reg to
@ test for !L_PTE_DIRTY || L_PTE_RDONLY
tst ip, #1 << (55 - 32) | 1 << (58 - 32)
orrne rl, #PTE_AP2
biceq rl, #PTE_AP2
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
1: strd r2, r3, [r0]
ARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2 Commit ae8a8b9553bd ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead") added early function returns for page table cache flushing operations on ARMv7 SMP CPUs. Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences assemble to 2 bytes which can lead to corruption of the instruction stream after code patching. This patch fixes the alternates to use wide (32-bit) instructions for Thumb-2, therefore ensuring that the patching code works correctly. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-15 17:26:19 +04:00
ALT_SMP(W(nop))
ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead Many ARMv7 cores have hardware page table walkers that can read the L1 cache. This is discoverable from the ID_MMFR3 register, although this can be expensive to access from the low-level set_pte functions and is a pain to cache, particularly with multi-cluster systems. A useful observation is that the multi-processing extensions for ARMv7 require coherent table walks, meaning that we can make use of ALT_SMP patching in proc-v7-* to patch away the cache flush safely for these cores. Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-03 20:16:57 +04:00
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
#endif
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 19:29:12 +04:00
ret lr
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
ENDPROC(cpu_v7_set_pte_ext)
/*
* Memory region attributes for LPAE (defined in pgtable-3level.h):
*
* n = AttrIndx[2:0]
*
* n MAIR
* UNCACHED 000 00000000
* BUFFERABLE 001 01000100
* DEV_WC 001 01000100
* WRITETHROUGH 010 10101010
* WRITEBACK 011 11101110
* DEV_CACHED 011 11101110
* DEV_SHARED 100 00000100
* DEV_NONSHARED 100 00000100
* unused 101
* unused 110
* WRITEALLOC 111 11111111
*/
.equ PRRR, 0xeeaa4400 @ MAIR0
.equ NMRR, 0xff000004 @ MAIR1
/*
* Macro for setting up the TTBRx and TTBCR registers.
* - \ttbr1 updated.
*/
ARM: redo TTBR setup code for LPAE Re-engineer the LPAE TTBR setup code. Rather than passing some shifted address in order to fit in a CPU register, pass either a full physical address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1). This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of cpu_set_ttbr() in the secondary CPU startup code path (which was there to re-set TTBR1 to the appropriate high physical address space on Keystone2.) Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-04 22:09:46 +03:00
.macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
ARM: redo TTBR setup code for LPAE Re-engineer the LPAE TTBR setup code. Rather than passing some shifted address in order to fit in a CPU register, pass either a full physical address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1). This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of cpu_set_ttbr() in the secondary CPU startup code path (which was there to re-set TTBR1 to the appropriate high physical address space on Keystone2.) Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-04 22:09:46 +03:00
cmp \ttbr1, \tmp, lsr #12 @ PHYS_OFFSET > PAGE_OFFSET?
ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup Reading TTBCR in early boot stage might return the value of the previous kernel's configuration, especially in case of kexec. For example, if normal kernel (first kernel) had run on a configuration of PHYS_OFFSET <= PAGE_OFFSET and crash kernel (second kernel) is running on a configuration PHYS_OFFSET > PAGE_OFFSET, which can happen because it depends on the reserved area for crash kernel, reading TTBCR and using the value to OR other bit fields might be risky because it doesn't have a reset value for TTBCR. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hoeun Ryu <hoeun.ryu@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-07 08:49:19 +03:00
mov \tmp, #TTB_EAE @ for TTB control egister
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP)
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16)
/*
ARM: LPAE: factor out T1SZ and TTBR1 computations This patch moves the TTBR1 offset calculation and the T1SZ calculation out of the TTB setup assembly code. This should not affect functionality in any way, but improves code readability as well as readability of subsequent patches in this series. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-22 03:47:52 +04:00
* Only use split TTBRs if PHYS_OFFSET <= PAGE_OFFSET (cmp above),
* otherwise booting secondary CPUs would end up using TTBR1 for the
* identity mapping set up in TTBR0.
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
*/
ARM: LPAE: factor out T1SZ and TTBR1 computations This patch moves the TTBR1 offset calculation and the T1SZ calculation out of the TTB setup assembly code. This should not affect functionality in any way, but improves code readability as well as readability of subsequent patches in this series. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-22 03:47:52 +04:00
orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
ARM: redo TTBR setup code for LPAE Re-engineer the LPAE TTBR setup code. Rather than passing some shifted address in order to fit in a CPU register, pass either a full physical address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1). This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of cpu_set_ttbr() in the secondary CPU startup code path (which was there to re-set TTBR1 to the appropriate high physical address space on Keystone2.) Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-04 22:09:46 +03:00
mov \tmp, \ttbr1, lsr #20
mov \ttbr1, \ttbr1, lsl #12
ARM: LPAE: factor out T1SZ and TTBR1 computations This patch moves the TTBR1 offset calculation and the T1SZ calculation out of the TTB setup assembly code. This should not affect functionality in any way, but improves code readability as well as readability of subsequent patches in this series. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-22 03:47:52 +04:00
addls \ttbr1, \ttbr1, #TTBR1_OFFSET
ARM: 8114/1: LPAE: load upper bits of early TTBR0/TTBR1 This patch fixes booting when idmap pgd lays above 4gb. Commit 4756dcbfd37 mostly had fixed this, but it'd failed to load upper bits. Also this fixes adding TTBR1_OFFSET to TTRR1: if lower part overflows carry flag must be added to the upper part. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-25 12:16:28 +04:00
mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
.endm
/*
* AT
* TFR EV X F IHD LR S
* .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
ARM: 8164/1: mm: clear SCTLR.HA instead of setting it for LPAE SCTLR.HA (hardware access flag) is deprecated and not actually implemented by any CPUs. Furthermore, it can confuse cr_alignment checks where the whole value of SCTLR is compared against the value sitting in the hardware, since the bit is actually RAZ/WI and will not match the saved cr_alignment value. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-09-25 14:39:19 +04:00
* 11 0 110 0 0011 1100 .111 1101 < we want
ARM: LPAE: MMU setup for the 3-level page table format This patch adds the MMU initialisation for the LPAE page table format. The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new proc-v7-3level.S file contains the TTB initialisation, context switch and PTE setting code with the LPAE. The TTBRx split is based on the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings (supersections) and a few other memory types in mmu.c are conditionally compiled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-22 21:30:29 +04:00
*/
.align 2
.type v7_crval, #object
v7_crval:
ARM: 8164/1: mm: clear SCTLR.HA instead of setting it for LPAE SCTLR.HA (hardware access flag) is deprecated and not actually implemented by any CPUs. Furthermore, it can confuse cr_alignment checks where the whole value of SCTLR is compared against the value sitting in the hardware, since the bit is actually RAZ/WI and will not match the saved cr_alignment value. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-09-25 14:39:19 +04:00
crval clear=0x0122c302, mmuset=0x30c03c7d, ucset=0x00c01c7c
Reference in New Issue Copy Permalink