linux/arch/arm/plat-samsung/Makefile

# arch/arm/plat-s3c64xx/Makefile
#
# Copyright 2009 Simtec Electronics
#
# Licensed under GPLv2

obj-y				:=
obj-m				:=
obj-n				:= dummy.o
obj-				:=

# Objects we always build independent of SoC choice

obj-y				+= init.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
obj-y				+= clock.o
obj-y				+= pwm-clock.o
obj-y				+= gpio.o
obj-y				+= gpio-config.o
obj-y				+= dev-asocdma.o

obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o

obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o

# ADC

obj-$(CONFIG_S3C_ADC)	+= adc.o

# devices

obj-y				+= platformdata.o

obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
obj-$(CONFIG_S3C_DEV_HSMMC3)	+= dev-hsmmc3.o
obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
obj-y				+= dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
obj-$(CONFIG_S3C_DEV_I2C3)	+= dev-i2c3.o
obj-$(CONFIG_S3C_DEV_I2C4)	+= dev-i2c4.o
obj-$(CONFIG_S3C_DEV_I2C5)	+= dev-i2c5.o
obj-$(CONFIG_S3C_DEV_I2C6)	+= dev-i2c6.o
obj-$(CONFIG_S3C_DEV_I2C7)	+= dev-i2c7.o
obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
obj-y				+= dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_WDT)	+= dev-wdt.o
obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o

obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_IDE)	+= dev-ide.o
obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)	+= dev-keypad.o
obj-$(CONFIG_SAMSUNG_DEV_PWM)	+= dev-pwm.o

# DMA support

obj-$(CONFIG_S3C_DMA)		+= dma.o

obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o

# PM support

obj-$(CONFIG_PM)		+= pm.o
obj-$(CONFIG_PM)		+= pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o

obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o

# PD support

obj-$(CONFIG_SAMSUNG_PD)	+= pd.o

# PWM support

obj-$(CONFIG_HAVE_PWM)		+= pwm.o
ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves We inted to re-organise the plat-s3c/plat-s3c24xx/plat-s3c64xx into a more generic plat-samsung with less code in the other plat- directories to make it easier to port new devices and try and clear up some of the naming issues with newer devices. Start by creating a small arch/arm/plat-samsung with no actuall code in so we can move items in as we process them. Add this to arch/arm to allow it to build things once support is added. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-11-10 00:14:58 +00:00			`# arch/arm/plat-s3c64xx/Makefile`
			`#`
			`# Copyright 2009 Simtec Electronics`
			`#`
			`# Licensed under GPLv2`

			`obj-y :=`
			`obj-m :=`
			`obj-n := dummy.o`
			`obj- :=`

ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung This is the core implementation of the clock code for all Samsung based SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already been moved). Since the file is built for every Samsung SoC, no changes are needed to the Kconfig system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-12-23 18:43:48 +00:00			`# Objects we always build independent of SoC choice`

ARM: SAMSUNG: Move the last build from plat-s3c to plat-samsung Move the init.c and time.c files to plat-samsung from plat-s3c, thus clearing the last files that are being built in here. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-29 09:02:16 +00:00			`obj-y += init.o`
ARM: S5PV310: Add Timer support This patch adds timer support for S5PV310. Until now, all S5P SoCs use CONFIG_ARCH_USES_GETTIMEOFFSET macro as a default configuration. Instead,S5PV310 implements clocksource and clock_event_device to support the high resolution timer and tickless system. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-07-26 21:13:08 +09:00			`obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o`
ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung This is the core implementation of the clock code for all Samsung based SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already been moved). Since the file is built for every Samsung SoC, no changes are needed to the Kconfig system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-12-23 18:43:48 +00:00			`obj-y += clock.o`
ARM: SAMSUNG: Move pwm-clock code into plat-samsung Move the code for the pwm-clock into plat-samsung, as it is common to all Samsung SoCs. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:39:28 +09:00			`obj-y += pwm-clock.o`
ARM: SAMSUNG: Move gpiolib support in gpio.c to plat-samsung Move the gpio.c code containing the core gpiolib and GPIO support to plat-samsung from plat-s3c as it is used by all current Samsung SoCs. Note, we didn't move this to gpiolib.c as it contains code that is not strictly for gpiolib support and the 4bit code is already called gpiolib.c so make the change easier by not renaming both files in one go. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-18 11:22:38 +09:00			`obj-y += gpio.o`
ARM: SAMSUNG: Move gpio-config.c into plat-samsung The arch/arm/plat-s3c/gpio-config.c file is common to pretty much all the Samsung SoCs, so move it to arch/arm/plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:28:20 +09:00			`obj-y += gpio-config.o`
ARM: Samsung: Define common audio-dma device The ASoC uses common DMA driver for Audio devices. So it makes sense to a common audio-dma device shared across all platforms. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2010-11-22 15:35:53 +09:00			`obj-y += dev-asocdma.o`
ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung This is the core implementation of the clock code for all Samsung based SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already been moved). Since the file is built for every Samsung SoC, no changes are needed to the Kconfig system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-12-23 18:43:48 +00:00
ARM: SAMSUNG: Add core clock implementation for clksrc based clocks Add a core for the clksrc clock implementation, which is found in many of the newer Samsung SoCs into plat-samsung. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ben-linux@fluff.org: split from original patch to make change smaller] [ben-linux@fluff.org: split clk and clksrc changes] [ben-linux@fluff.org: moved to plat-samsung from plat-s3c] [ben-linux@fluff.org: re-wrote headers after splits] [ben-linux@fluff.org: added better documentation to headers] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-12-01 01:24:34 +00:00			`obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o`
ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00
ARM: SAMSUNG: Move IRQ UART handling for newer devices to plat-samsung Move the handling for the UART interrupts out of the s3c64xx specific code and into plat-samsung so that it can be used by all implementations that need it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 11:18:44 +09:00			`obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o`
ARM: SAMSUNG: Move IRQ VIC timer handling out to common header files Move the VIC based timer interrupt handling out of plat-s3c64xx and into plat-samsung to be re-used for other systems. This also reduces the code size as we now have a common init routine and use the irq_desc to store the interrupt number of the timer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 10:14:51 +09:00			`obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o`

ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsung Move S3C24XX ADC driver to plat-samsung Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-14 00:30:31 +01:00			`# ADC`

			`obj-$(CONFIG_S3C_ADC) += adc.o`

ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`# devices`

ARM: SAMSUNG: Add helper to clone and set platform data This is intended to replace a number of sites in the Samsung kernel where the same thing is being repeated in specific platform setting code. See next patches for replacements. Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: This is for building test] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-10 12:57:15 +09:00			`obj-y += platformdata.o`

ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o`
			`obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o`
			`obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o`
ARM: SAMSUNG: Add device definition for HSMMC3 This patch adds hsmmc3 device definition in plat-samsung. Because now S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 and that can be used in further Samsung SoCs. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-10 15:22:16 +09:00			`obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o`
ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung Move HWMON platform definition from plat-s3c24xx to plat-samsung and adjust mach-bast to use the new s3c_hwmon_set_platdata(). This allows usage of dev-hwmon by other Samsung SoCs. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-04 13:12:32 +02:00			`obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o`
ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`obj-y += dev-i2c0.o`
			`obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o`
ARM: S5PV210: add common I2C device helpers This patch adds I2C platform helpers required by s3c2440-i2c driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 08:13:06 +02:00			`obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o`
ARM: S5PV310: Add I2C channel 3, 4, 5, 6, and 7 device support S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-10-12 07:49:24 +09:00			`obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o`
			`obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o`
			`obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o`
			`obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o`
			`obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o`
ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o`
ARM: SAMSUNG: Make UART device code common Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a common entry in plat-samsung since they are the same in all the current implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-12 15:15:28 +09:00			`obj-y += dev-uart.o`
ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o`
			`obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o`
ARM: SAMSUNG: Move WDT device definitions in plat-samsung This patch moves the definitions of watchdog timer device from plat-s3c24xx to plat-samsung. This will enable all Samsung S3C and S5P series SoC's to use common WDT device definition. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-19 15:42:29 +09:00			`obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o`
ARM: SAMSUNG: Move device definitions in plat-samsung Move all the platform device definitions from plat-s3c into plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-06 02:45:09 +09:00			`obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o`
ARM: SAMSUNG: Add platform support code for OneNAND controller This patch adds setup code for Samsung OneNAND controller driver. The driver needs to be aware on which SoC it is running, so the actual device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND controllers while S5PC100 and S5PC110 has only one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [ben-linux@fluff.org: sort map.h entries] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 08:59:05 +02:00			`obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o`
ARM: SAMSUNG: Move RTC device definitions in plat-samsung This patch moves RTC device definitions from mach-s3c64xx to plat-samsung, to enable the other SoCs to use same device definition. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:58:56 +09:00			`obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o`
ARM: SAMSUNG: Move pm-gpio into plat-samsung Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-18 10:47:45 +09:00
ARM: SAMSUNG: Moving ADC device definition to plat-samsung. This patch moves ADC device definition to plat-samsung. Because that is generic to the S3C64XX and S5P Series SoCs. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-13 22:06:36 +09:00			`obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o`
ARM: SAMSUNG: Add Compact Flash device support for Samsung SoCs Following has been added: - Common CF Platform device definition - Platform data strucure definition - CF controller register definitions Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-08 16:38:20 +09:00			`obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o`
ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration Move the arch/arm/mach-s3c64xx/dev-ts.c file to arch/arm/plat-samsung and rename the Kconfig entry appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-19 14:36:28 +09:00			`obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o`
ARM: SAMSUNG: Add keypad device support This patch adds Samsung keypad device definition for Samsung SoCs. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-08-06 19:26:10 +09:00			`obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o`
ARM: SAMSUNG: Move PWM device definition from plat-s3c24xx to plat-samsung This patch does the following:- 1. It moves file pwm.c from plat-s3c24xx to plat-samsung. This will enable all machines with Samsung SoCs to make use of the same code. 2. The device definitions have been separated to a new file dev-pwm.c for better clarity and structure. 3. It will enable all Samsung S3C and S5P series SoC's to use common PWM Kconfig definition. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2011-02-28 22:24:51 +05:30			`obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o`
ARM: SAMSUNG: Move pm-gpio into plat-samsung Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-18 10:47:45 +09:00
ARM: SAMSUNG: Move DMA support to plat-samsung Move the core of the DMA support to plat-samsung for everyone to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-29 09:02:15 +00:00			`# DMA support`

			`obj-$(CONFIG_S3C_DMA) += dma.o`

S3C: DMA: Add api driver for PL330 Latest Samsung SoCs have one or more PL330 as their DMACs. This patch implements the S3C DMA API for PL330 core driver. The design has been kept as generic as possible while keeping effort to add support for new SoCs to the minimum possible level. Some of the salient features of this driver are:- o Automatic scheduling of client requests onto DMAC if more than one DMAC can reach the peripheral. Factors, such as current load and number of exclusive but inactive peripherals that are supported by the DMAC, are used to decide suitability of a DMAC for a particular client. o CIRCULAR buffer option is supported. o The driver scales transparently with the number of DMACs and total peripherals in the platform, since all peripherals are added to the peripheral pool and DMACs to the controller pool. For most conservative use of memory, smallest driver size and best performance, we don't employ legacy data structures of the S3C DMA API. That should not have any affect since those data structures are completely invisible to the DMA clients. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 11:59:06 +09:00			`obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o`

ARM: SAMSUNG: Move pm-gpio into plat-samsung Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-18 10:47:45 +09:00			`# PM support`

ARM: SAMSUNG: Move pm.c to plat-samsung Move pm.c to plat-samsung, it should be usable by all Samsung systems Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-29 09:02:14 +00:00			`obj-$(CONFIG_PM) += pm.o`
ARM: SAMSUNG: Move pm-gpio into plat-samsung Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-18 10:47:45 +09:00			`obj-$(CONFIG_PM) += pm-gpio.o`
ARM: SAMSUNG: Move pm-check.c to plat-samsung Move the pm-check.c file to plat-samsung for all Samsung SoC users, and update Kconfig names to make them SAMSUNG_ instead of S3C2410_ Sed expresions used to make the change: s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-20 12:29:25 +09:00			`obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o`
ARM: SAMSUNG: Move pmw.c to plat-samsung Move the PWM driver support to plat-samsung, as these PWM blocks are close enough across the current range to be supported by this driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-20 12:22:24 +09:00
ARM: SAMSUNG: Add support for interrupt wakeup-sources Add support for wakeup-mask style interrupts that share a single mask register for various different interrupts. This registers a set of interrupt->bit mappings and the register they belong to. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 14:05:33 +09:00			`obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o`

ARM: SAMSUNG: Add support for Power Domain control This patch implements Power Domain control based on Runtime PM framework. Each Power Domain is represented by a Power Domain device and the devices belong to these Power Domains should be set as a child device of the Power Domain devices. The corresponding drivers of the devices should implement Runtime PM to control the Power Domains. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-12-03 17:14:57 +09:00			`# PD support`

			`obj-$(CONFIG_SAMSUNG_PD) += pd.o`

ARM: SAMSUNG: Move pmw.c to plat-samsung Move the PWM driver support to plat-samsung, as these PWM blocks are close enough across the current range to be supported by this driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-01-20 12:22:24 +09:00			`# PWM support`

			`obj-$(CONFIG_HAVE_PWM) += pwm.o`