iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
074694956b
linux/arch/arm/mach-imx/Kconfig

136 lines
3.1 KiB
Plaintext
Raw Normal View History

ARM: imx: move mx1 support to mach-imx Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-14 17:56:58 +04:00
if ARCH_MX1
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
help
Say Y here if you are using a Synertronixx scb9328 board
endif
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 16:42:25 +03:00
if ARCH_MX2
i.MX2 family: Add basic mach support (sources) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:02:56 +04:00
arm/imx21: add kbuild support for the Freescale i.MX21 * adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-26 18:34:52 +03:00
choice
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 16:42:25 +03:00
prompt "CPUs:"
arm/imx21: add kbuild support for the Freescale i.MX21 * adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-26 18:34:52 +03:00
default MACH_MX21
config MACH_MX21
bool "i.MX21 support"
MXC: Add a digital audio multiplexer driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-29 19:12:39 +03:00
select ARCH_MXC_AUDMUX_V1
arm/imx21: add kbuild support for the Freescale i.MX21 * adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-26 18:34:52 +03:00
help
This enables support for Freescale's MX2 based i.MX21 processor.
i.MX27 CPU: Add basic i.MX27 CPU support Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:02:59 +04:00
config MACH_MX27
bool "i.MX27 support"
MXC: Add a digital audio multiplexer driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-29 19:12:39 +03:00
select ARCH_MXC_AUDMUX_V1
i.MX27 CPU: Add basic i.MX27 CPU support Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:02:59 +04:00
help
This enables support for Freescale's MX2 based i.MX27 processor.
arm/imx21: add kbuild support for the Freescale i.MX21 * adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-26 18:34:52 +03:00
endchoice
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 16:42:25 +03:00
comment "MX2 platforms:"
i.MX27: Add ADS platform support This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:03:00 +04:00
MXC: mx21ads base support [PATCH v6] MXC: mx21ads base support Base machine support for the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-15 17:39:27 +04:00
config MACH_MX21ADS
bool "MX21ADS platform"
depends on MACH_MX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
i.MX27: Add ADS platform support This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:03:00 +04:00
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:03:00 +04:00
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
depends on MACH_MX27
i.MX27 pcm038: Add USB support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-03 19:13:41 +03:00
select MXC_ULPI if USB_ULPI
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:03:00 +04:00
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
i.MX27 family: Add the Phytec PCM970 evaluation board The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 12:03:01 +04:00
choice
prompt "Baseboard"
depends on MACH_PCM038
default MACH_PCM970_BASEBOARD
config MACH_PCM970_BASEBOARD
prompt "PHYTEC PCM970 development board"
bool
help
This adds board specific devices that can be found on Phytec's
PCM970 evaluation board.
endchoice
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 16:42:25 +03:00
imx: rename Kconfig symbol for "Eukrea CPUIMX27 module" Not using MACH_CPUIMX27 makes machine_is_cpuimx27 always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Benard <eric@eukrea.com>
2009-12-10 12:19:43 +03:00
config MACH_CPUIMX27
Add support for Eukrea's CPUIMX27 CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR, it includes an ethernet PHY in MII mode, an I2C RTC and a ST16554 QuadUART on nCS3. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 18:26:33 +04:00
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
imx: rename Kconfig symbol for "Eukrea CPUIMX27 module" Not using MACH_CPUIMX27 makes machine_is_cpuimx27 always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Benard <eric@eukrea.com>
2009-12-10 12:19:43 +03:00
depends on MACH_CPUIMX27
Add support for Eukrea's CPUIMX27 CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR, it includes an ethernet PHY in MII mode, an I2C RTC and a ST16554 QuadUART on nCS3. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 18:26:33 +04:00
help
This adds support for the internal SDHC2 used on CPUIMX27 used
for wifi or eMMC.
Add support for Eukrea's MBIMX27 MBIMX27 is the evaluation board for CPUIMX27 and integrates : a QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to SDHC1. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 18:26:34 +04:00
choice
prompt "Baseboard"
imx: rename Kconfig symbol for "Eukrea CPUIMX27 module" Not using MACH_CPUIMX27 makes machine_is_cpuimx27 always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Benard <eric@eukrea.com>
2009-12-10 12:19:43 +03:00
depends on MACH_CPUIMX27
Add support for Eukrea's MBIMX27 MBIMX27 is the evaluation board for CPUIMX27 and integrates : a QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to SDHC1. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 18:26:34 +04:00
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
prompt "Eukrea MBIMX27 development board"
bool
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
endchoice
MX27: Add basic support to MX27PDK This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 23:45:01 +04:00
config MACH_MX27_3DS
bool "MX27PDK platform"
depends on MACH_MX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
mxc: Add i.MX27LITE board support Sascha Hauer wrote: > On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote: >> Add basic support for the Logic i.MX27LITE board. >> >> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> > > Besides the comment made by Fabio this looks ok to me. > > Sascha > > Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head. Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 01:23:54 +04:00
imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform" Not using MACH_IMX27LITE makes machine_is_imx27lite always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
2009-12-10 12:25:07 +03:00
config MACH_IMX27LITE
mxc: Add i.MX27LITE board support Sascha Hauer wrote: > On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote: >> Add basic support for the Logic i.MX27LITE board. >> >> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> > > Besides the comment made by Fabio this looks ok to me. > > Sascha > > Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head. Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 01:23:54 +04:00
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
mx27: add support for phytec pca100 (phyCARD-s) board Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-06 13:19:39 +04:00
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
depends on MACH_MX27
i.MX27 pca100: Add USB support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-03 19:13:29 +03:00
select MXC_ULPI if USB_ULPI
mx27: add support for phytec pca100 (phyCARD-s) board Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-06 13:19:39 +04:00
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
mx27: Add basic support for Maxtrack i-MXT TD60 Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-25 20:24:50 +03:00
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
depends on MACH_MX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 16:42:25 +03:00
endif
Reference in New Issue Copy Permalink