2006-04-20 07:24:51 +04:00
/*------------------------------------------------------------------------
. smc911x . h - macros for SMSC ' s LAN911 { 5 , 6 , 7 , 8 } single - chip Ethernet device .
.
. Copyright ( C ) 2005 Sensoria Corp .
. Derived from the unified SMC91x driver by Nicolas Pitre
.
. This program is free software ; you can redistribute it and / or modify
. it under the terms of the GNU General Public License as published by
. the Free Software Foundation ; either version 2 of the License , or
. ( at your option ) any later version .
.
. This program is distributed in the hope that it will be useful ,
. but WITHOUT ANY WARRANTY ; without even the implied warranty of
. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
. GNU General Public License for more details .
.
. You should have received a copy of the GNU General Public License
. along with this program ; if not , write to the Free Software
. Foundation , Inc . , 59 Temple Place , Suite 330 , Boston , MA 02111 - 1307 USA
.
. Information contained in this file was obtained from the LAN9118
. manual from SMC . To get a copy , if you really want one , you can find
. information under www . smsc . com .
.
. Authors
. Dustin McIntire < dustin @ sensoria . com >
.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
# ifndef _SMC911X_H_
# define _SMC911X_H_
/*
* Use the DMA feature on PXA chips
*/
# ifdef CONFIG_ARCH_PXA
# define SMC_USE_PXA_DMA 1
# define SMC_USE_16BIT 0
# define SMC_USE_32BIT 1
# endif
/*
* Define the bus width specific IO macros
*/
# if SMC_USE_16BIT
# define SMC_inb(a, r) readb((a) + (r))
# define SMC_inw(a, r) readw((a) + (r))
# define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16))
# define SMC_outb(v, a, r) writeb(v, (a) + (r))
# define SMC_outw(v, a, r) writew(v, (a) + (r))
# define SMC_outl(v, a, r) \
do { \
writel ( v & 0xFFFF , ( a ) + ( r ) ) ; \
writel ( v > > 16 , ( a ) + ( r ) + 2 ) ; \
} while ( 0 )
# define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2)
# define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2)
# elif SMC_USE_32BIT
# define SMC_inb(a, r) readb((a) + (r))
# define SMC_inw(a, r) readw((a) + (r))
# define SMC_inl(a, r) readl((a) + (r))
# define SMC_outb(v, a, r) writeb(v, (a) + (r))
# define SMC_outl(v, a, r) writel(v, (a) + (r))
# define SMC_insl(a, r, p, l) readsl((int*)((a) + (r)), p, l)
# define SMC_outsl(a, r, p, l) writesl((int*)((a) + (r)), p, l)
# endif /* SMC_USE_16BIT */
# if SMC_USE_PXA_DMA
# define SMC_USE_DMA
2006-04-21 01:39:14 +04:00
/*
* Define the request and free functions
2006-04-20 07:24:51 +04:00
* These are unfortunately architecture specific as no generic allocation
* mechanism exits
*/
# define SMC_DMA_REQUEST(dev, handler) \
2006-04-21 01:39:14 +04:00
pxa_request_dma ( dev - > name , DMA_PRIO_LOW , handler , dev )
2006-04-20 07:24:51 +04:00
# define SMC_DMA_FREE(dev, dma) \
pxa_free_dma ( dma )
# define SMC_DMA_ACK_IRQ(dev, dma) \
{ \
if ( DCSR ( dma ) & DCSR_BUSERR ) { \
printk ( " %s: DMA %d bus error! \n " , dev - > name , dma ) ; \
} \
DCSR ( dma ) = DCSR_STARTINTR | DCSR_ENDINTR | DCSR_BUSERR ; \
}
/*
* Use a DMA for RX and TX packets .
*/
# include <linux/dma-mapping.h>
# include <asm/dma.h>
# include <asm/arch/pxa-regs.h>
static dma_addr_t rx_dmabuf , tx_dmabuf ;
static int rx_dmalen , tx_dmalen ;
2006-04-21 01:39:14 +04:00
2006-04-20 07:24:51 +04:00
# ifdef SMC_insl
# undef SMC_insl
# define SMC_insl(a, r, p, l) \
smc_pxa_dma_insl ( lp - > dev , a , lp - > physaddr , r , lp - > rxdma , p , l )
static inline void
2006-04-21 01:39:14 +04:00
smc_pxa_dma_insl ( struct device * dev , u_long ioaddr , u_long physaddr ,
2006-04-20 07:24:51 +04:00
int reg , int dma , u_char * buf , int len )
{
/* 64 bit alignment is required for memory to memory DMA */
if ( ( long ) buf & 4 ) {
* ( ( u32 * ) buf ) = SMC_inl ( ioaddr , reg ) ;
buf + = 4 ;
len - - ;
}
len * = 4 ;
rx_dmabuf = dma_map_single ( dev , buf , len , DMA_FROM_DEVICE ) ;
rx_dmalen = len ;
DCSR ( dma ) = DCSR_NODESC ;
DTADR ( dma ) = rx_dmabuf ;
DSADR ( dma ) = physaddr + reg ;
DCMD ( dma ) = ( DCMD_INCTRGADDR | DCMD_BURST32 |
DCMD_WIDTH4 | DCMD_ENDIRQEN | ( DCMD_LENGTH & rx_dmalen ) ) ;
DCSR ( dma ) = DCSR_NODESC | DCSR_RUN ;
}
# endif
# ifdef SMC_insw
# undef SMC_insw
# define SMC_insw(a, r, p, l) \
smc_pxa_dma_insw ( lp - > dev , a , lp - > physaddr , r , lp - > rxdma , p , l )
static inline void
2006-04-21 01:39:14 +04:00
smc_pxa_dma_insw ( struct device * dev , u_long ioaddr , u_long physaddr ,
2006-04-20 07:24:51 +04:00
int reg , int dma , u_char * buf , int len )
{
/* 64 bit alignment is required for memory to memory DMA */
while ( ( long ) buf & 6 ) {
* ( ( u16 * ) buf ) = SMC_inw ( ioaddr , reg ) ;
buf + = 2 ;
len - - ;
}
len * = 2 ;
rx_dmabuf = dma_map_single ( dev , buf , len , DMA_FROM_DEVICE ) ;
rx_dmalen = len ;
DCSR ( dma ) = DCSR_NODESC ;
DTADR ( dma ) = rx_dmabuf ;
DSADR ( dma ) = physaddr + reg ;
DCMD ( dma ) = ( DCMD_INCTRGADDR | DCMD_BURST32 |
DCMD_WIDTH2 | DCMD_ENDIRQEN | ( DCMD_LENGTH & rx_dmalen ) ) ;
DCSR ( dma ) = DCSR_NODESC | DCSR_RUN ;
}
# endif
# ifdef SMC_outsl
# undef SMC_outsl
# define SMC_outsl(a, r, p, l) \
smc_pxa_dma_outsl ( lp - > dev , a , lp - > physaddr , r , lp - > txdma , p , l )
static inline void
2006-04-21 01:39:14 +04:00
smc_pxa_dma_outsl ( struct device * dev , u_long ioaddr , u_long physaddr ,
2006-04-20 07:24:51 +04:00
int reg , int dma , u_char * buf , int len )
{
/* 64 bit alignment is required for memory to memory DMA */
if ( ( long ) buf & 4 ) {
SMC_outl ( * ( ( u32 * ) buf ) , ioaddr , reg ) ;
buf + = 4 ;
len - - ;
}
len * = 4 ;
tx_dmabuf = dma_map_single ( dev , buf , len , DMA_TO_DEVICE ) ;
tx_dmalen = len ;
DCSR ( dma ) = DCSR_NODESC ;
DSADR ( dma ) = tx_dmabuf ;
DTADR ( dma ) = physaddr + reg ;
DCMD ( dma ) = ( DCMD_INCSRCADDR | DCMD_BURST32 |
DCMD_WIDTH4 | DCMD_ENDIRQEN | ( DCMD_LENGTH & tx_dmalen ) ) ;
DCSR ( dma ) = DCSR_NODESC | DCSR_RUN ;
}
# endif
# ifdef SMC_outsw
# undef SMC_outsw
# define SMC_outsw(a, r, p, l) \
smc_pxa_dma_outsw ( lp - > dev , a , lp - > physaddr , r , lp - > txdma , p , l )
static inline void
2006-04-21 01:39:14 +04:00
smc_pxa_dma_outsw ( struct device * dev , u_long ioaddr , u_long physaddr ,
2006-04-20 07:24:51 +04:00
int reg , int dma , u_char * buf , int len )
{
/* 64 bit alignment is required for memory to memory DMA */
while ( ( long ) buf & 6 ) {
SMC_outw ( * ( ( u16 * ) buf ) , ioaddr , reg ) ;
buf + = 2 ;
len - - ;
}
len * = 2 ;
tx_dmabuf = dma_map_single ( dev , buf , len , DMA_TO_DEVICE ) ;
tx_dmalen = len ;
DCSR ( dma ) = DCSR_NODESC ;
DSADR ( dma ) = tx_dmabuf ;
DTADR ( dma ) = physaddr + reg ;
DCMD ( dma ) = ( DCMD_INCSRCADDR | DCMD_BURST32 |
DCMD_WIDTH2 | DCMD_ENDIRQEN | ( DCMD_LENGTH & tx_dmalen ) ) ;
DCSR ( dma ) = DCSR_NODESC | DCSR_RUN ;
}
# endif
# endif /* SMC_USE_PXA_DMA */
/* Chip Parameters and Register Definitions */
# define SMC911X_TX_FIFO_LOW_THRESHOLD (1536*2)
# define SMC911X_IO_EXTENT 0x100
# define SMC911X_EEPROM_LEN 7
/* Below are the register offsets and bit definitions
* of the Lan911x memory space
*/
# define RX_DATA_FIFO (0x00)
# define TX_DATA_FIFO (0x20)
# define TX_CMD_A_INT_ON_COMP_ (0x80000000)
# define TX_CMD_A_INT_BUF_END_ALGN_ (0x03000000)
# define TX_CMD_A_INT_4_BYTE_ALGN_ (0x00000000)
# define TX_CMD_A_INT_16_BYTE_ALGN_ (0x01000000)
# define TX_CMD_A_INT_32_BYTE_ALGN_ (0x02000000)
# define TX_CMD_A_INT_DATA_OFFSET_ (0x001F0000)
# define TX_CMD_A_INT_FIRST_SEG_ (0x00002000)
# define TX_CMD_A_INT_LAST_SEG_ (0x00001000)
# define TX_CMD_A_BUF_SIZE_ (0x000007FF)
# define TX_CMD_B_PKT_TAG_ (0xFFFF0000)
# define TX_CMD_B_ADD_CRC_DISABLE_ (0x00002000)
# define TX_CMD_B_DISABLE_PADDING_ (0x00001000)
# define TX_CMD_B_PKT_BYTE_LENGTH_ (0x000007FF)
# define RX_STATUS_FIFO (0x40)
# define RX_STS_PKT_LEN_ (0x3FFF0000)
# define RX_STS_ES_ (0x00008000)
# define RX_STS_BCST_ (0x00002000)
# define RX_STS_LEN_ERR_ (0x00001000)
# define RX_STS_RUNT_ERR_ (0x00000800)
# define RX_STS_MCAST_ (0x00000400)
# define RX_STS_TOO_LONG_ (0x00000080)
# define RX_STS_COLL_ (0x00000040)
# define RX_STS_ETH_TYPE_ (0x00000020)
# define RX_STS_WDOG_TMT_ (0x00000010)
# define RX_STS_MII_ERR_ (0x00000008)
# define RX_STS_DRIBBLING_ (0x00000004)
# define RX_STS_CRC_ERR_ (0x00000002)
# define RX_STATUS_FIFO_PEEK (0x44)
# define TX_STATUS_FIFO (0x48)
# define TX_STS_TAG_ (0xFFFF0000)
# define TX_STS_ES_ (0x00008000)
# define TX_STS_LOC_ (0x00000800)
# define TX_STS_NO_CARR_ (0x00000400)
# define TX_STS_LATE_COLL_ (0x00000200)
# define TX_STS_MANY_COLL_ (0x00000100)
# define TX_STS_COLL_CNT_ (0x00000078)
# define TX_STS_MANY_DEFER_ (0x00000004)
# define TX_STS_UNDERRUN_ (0x00000002)
# define TX_STS_DEFERRED_ (0x00000001)
# define TX_STATUS_FIFO_PEEK (0x4C)
# define ID_REV (0x50)
# define ID_REV_CHIP_ID_ (0xFFFF0000) /* RO */
# define ID_REV_REV_ID_ (0x0000FFFF) /* RO */
# define INT_CFG (0x54)
# define INT_CFG_INT_DEAS_ (0xFF000000) /* R/W */
# define INT_CFG_INT_DEAS_CLR_ (0x00004000)
# define INT_CFG_INT_DEAS_STS_ (0x00002000)
# define INT_CFG_IRQ_INT_ (0x00001000) /* RO */
# define INT_CFG_IRQ_EN_ (0x00000100) /* R/W */
# define INT_CFG_IRQ_POL_ (0x00000010) /* R/W Not Affected by SW Reset */
# define INT_CFG_IRQ_TYPE_ (0x00000001) /* R/W Not Affected by SW Reset */
# define INT_STS (0x58)
# define INT_STS_SW_INT_ (0x80000000) /* R/WC */
# define INT_STS_TXSTOP_INT_ (0x02000000) /* R/WC */
# define INT_STS_RXSTOP_INT_ (0x01000000) /* R/WC */
# define INT_STS_RXDFH_INT_ (0x00800000) /* R/WC */
# define INT_STS_RXDF_INT_ (0x00400000) /* R/WC */
# define INT_STS_TX_IOC_ (0x00200000) /* R/WC */
# define INT_STS_RXD_INT_ (0x00100000) /* R/WC */
# define INT_STS_GPT_INT_ (0x00080000) /* R/WC */
# define INT_STS_PHY_INT_ (0x00040000) /* RO */
# define INT_STS_PME_INT_ (0x00020000) /* R/WC */
# define INT_STS_TXSO_ (0x00010000) /* R/WC */
# define INT_STS_RWT_ (0x00008000) /* R/WC */
# define INT_STS_RXE_ (0x00004000) /* R/WC */
# define INT_STS_TXE_ (0x00002000) /* R/WC */
//#define INT_STS_ERX_ (0x00001000) /* R/WC */
# define INT_STS_TDFU_ (0x00000800) /* R/WC */
# define INT_STS_TDFO_ (0x00000400) /* R/WC */
# define INT_STS_TDFA_ (0x00000200) /* R/WC */
# define INT_STS_TSFF_ (0x00000100) /* R/WC */
# define INT_STS_TSFL_ (0x00000080) /* R/WC */
//#define INT_STS_RXDF_ (0x00000040) /* R/WC */
# define INT_STS_RDFO_ (0x00000040) /* R/WC */
# define INT_STS_RDFL_ (0x00000020) /* R/WC */
# define INT_STS_RSFF_ (0x00000010) /* R/WC */
# define INT_STS_RSFL_ (0x00000008) /* R/WC */
# define INT_STS_GPIO2_INT_ (0x00000004) /* R/WC */
# define INT_STS_GPIO1_INT_ (0x00000002) /* R/WC */
# define INT_STS_GPIO0_INT_ (0x00000001) /* R/WC */
# define INT_EN (0x5C)
# define INT_EN_SW_INT_EN_ (0x80000000) /* R/W */
# define INT_EN_TXSTOP_INT_EN_ (0x02000000) /* R/W */
# define INT_EN_RXSTOP_INT_EN_ (0x01000000) /* R/W */
# define INT_EN_RXDFH_INT_EN_ (0x00800000) /* R/W */
//#define INT_EN_RXDF_INT_EN_ (0x00400000) /* R/W */
# define INT_EN_TIOC_INT_EN_ (0x00200000) /* R/W */
# define INT_EN_RXD_INT_EN_ (0x00100000) /* R/W */
# define INT_EN_GPT_INT_EN_ (0x00080000) /* R/W */
# define INT_EN_PHY_INT_EN_ (0x00040000) /* R/W */
# define INT_EN_PME_INT_EN_ (0x00020000) /* R/W */
# define INT_EN_TXSO_EN_ (0x00010000) /* R/W */
# define INT_EN_RWT_EN_ (0x00008000) /* R/W */
# define INT_EN_RXE_EN_ (0x00004000) /* R/W */
# define INT_EN_TXE_EN_ (0x00002000) /* R/W */
//#define INT_EN_ERX_EN_ (0x00001000) /* R/W */
# define INT_EN_TDFU_EN_ (0x00000800) /* R/W */
# define INT_EN_TDFO_EN_ (0x00000400) /* R/W */
# define INT_EN_TDFA_EN_ (0x00000200) /* R/W */
# define INT_EN_TSFF_EN_ (0x00000100) /* R/W */
# define INT_EN_TSFL_EN_ (0x00000080) /* R/W */
//#define INT_EN_RXDF_EN_ (0x00000040) /* R/W */
# define INT_EN_RDFO_EN_ (0x00000040) /* R/W */
# define INT_EN_RDFL_EN_ (0x00000020) /* R/W */
# define INT_EN_RSFF_EN_ (0x00000010) /* R/W */
# define INT_EN_RSFL_EN_ (0x00000008) /* R/W */
# define INT_EN_GPIO2_INT_ (0x00000004) /* R/W */
# define INT_EN_GPIO1_INT_ (0x00000002) /* R/W */
# define INT_EN_GPIO0_INT_ (0x00000001) /* R/W */
# define BYTE_TEST (0x64)
# define FIFO_INT (0x68)
# define FIFO_INT_TX_AVAIL_LEVEL_ (0xFF000000) /* R/W */
# define FIFO_INT_TX_STS_LEVEL_ (0x00FF0000) /* R/W */
# define FIFO_INT_RX_AVAIL_LEVEL_ (0x0000FF00) /* R/W */
# define FIFO_INT_RX_STS_LEVEL_ (0x000000FF) /* R/W */
# define RX_CFG (0x6C)
# define RX_CFG_RX_END_ALGN_ (0xC0000000) /* R/W */
# define RX_CFG_RX_END_ALGN4_ (0x00000000) /* R/W */
# define RX_CFG_RX_END_ALGN16_ (0x40000000) /* R/W */
# define RX_CFG_RX_END_ALGN32_ (0x80000000) /* R/W */
# define RX_CFG_RX_DMA_CNT_ (0x0FFF0000) /* R/W */
# define RX_CFG_RX_DUMP_ (0x00008000) /* R/W */
# define RX_CFG_RXDOFF_ (0x00001F00) /* R/W */
//#define RX_CFG_RXBAD_ (0x00000001) /* R/W */
# define TX_CFG (0x70)
//#define TX_CFG_TX_DMA_LVL_ (0xE0000000) /* R/W */
//#define TX_CFG_TX_DMA_CNT_ (0x0FFF0000) /* R/W Self Clearing */
# define TX_CFG_TXS_DUMP_ (0x00008000) /* Self Clearing */
# define TX_CFG_TXD_DUMP_ (0x00004000) /* Self Clearing */
# define TX_CFG_TXSAO_ (0x00000004) /* R/W */
# define TX_CFG_TX_ON_ (0x00000002) /* R/W */
# define TX_CFG_STOP_TX_ (0x00000001) /* Self Clearing */
# define HW_CFG (0x74)
# define HW_CFG_TTM_ (0x00200000) /* R/W */
# define HW_CFG_SF_ (0x00100000) /* R/W */
# define HW_CFG_TX_FIF_SZ_ (0x000F0000) /* R/W */
# define HW_CFG_TR_ (0x00003000) /* R/W */
# define HW_CFG_PHY_CLK_SEL_ (0x00000060) /* R/W */
# define HW_CFG_PHY_CLK_SEL_INT_PHY_ (0x00000000) /* R/W */
# define HW_CFG_PHY_CLK_SEL_EXT_PHY_ (0x00000020) /* R/W */
# define HW_CFG_PHY_CLK_SEL_CLK_DIS_ (0x00000040) /* R/W */
# define HW_CFG_SMI_SEL_ (0x00000010) /* R/W */
# define HW_CFG_EXT_PHY_DET_ (0x00000008) /* RO */
# define HW_CFG_EXT_PHY_EN_ (0x00000004) /* R/W */
# define HW_CFG_32_16_BIT_MODE_ (0x00000004) /* RO */
# define HW_CFG_SRST_TO_ (0x00000002) /* RO */
# define HW_CFG_SRST_ (0x00000001) /* Self Clearing */
# define RX_DP_CTRL (0x78)
# define RX_DP_CTRL_RX_FFWD_ (0x80000000) /* R/W */
# define RX_DP_CTRL_FFWD_BUSY_ (0x80000000) /* RO */
# define RX_FIFO_INF (0x7C)
# define RX_FIFO_INF_RXSUSED_ (0x00FF0000) /* RO */
# define RX_FIFO_INF_RXDUSED_ (0x0000FFFF) /* RO */
# define TX_FIFO_INF (0x80)
# define TX_FIFO_INF_TSUSED_ (0x00FF0000) /* RO */
# define TX_FIFO_INF_TDFREE_ (0x0000FFFF) /* RO */
# define PMT_CTRL (0x84)
# define PMT_CTRL_PM_MODE_ (0x00003000) /* Self Clearing */
# define PMT_CTRL_PHY_RST_ (0x00000400) /* Self Clearing */
# define PMT_CTRL_WOL_EN_ (0x00000200) /* R/W */
# define PMT_CTRL_ED_EN_ (0x00000100) /* R/W */
# define PMT_CTRL_PME_TYPE_ (0x00000040) /* R/W Not Affected by SW Reset */
# define PMT_CTRL_WUPS_ (0x00000030) /* R/WC */
# define PMT_CTRL_WUPS_NOWAKE_ (0x00000000) /* R/WC */
# define PMT_CTRL_WUPS_ED_ (0x00000010) /* R/WC */
# define PMT_CTRL_WUPS_WOL_ (0x00000020) /* R/WC */
# define PMT_CTRL_WUPS_MULTI_ (0x00000030) /* R/WC */
# define PMT_CTRL_PME_IND_ (0x00000008) /* R/W */
# define PMT_CTRL_PME_POL_ (0x00000004) /* R/W */
# define PMT_CTRL_PME_EN_ (0x00000002) /* R/W Not Affected by SW Reset */
# define PMT_CTRL_READY_ (0x00000001) /* RO */
# define GPIO_CFG (0x88)
# define GPIO_CFG_LED3_EN_ (0x40000000) /* R/W */
# define GPIO_CFG_LED2_EN_ (0x20000000) /* R/W */
# define GPIO_CFG_LED1_EN_ (0x10000000) /* R/W */
# define GPIO_CFG_GPIO2_INT_POL_ (0x04000000) /* R/W */
# define GPIO_CFG_GPIO1_INT_POL_ (0x02000000) /* R/W */
# define GPIO_CFG_GPIO0_INT_POL_ (0x01000000) /* R/W */
# define GPIO_CFG_EEPR_EN_ (0x00700000) /* R/W */
# define GPIO_CFG_GPIOBUF2_ (0x00040000) /* R/W */
# define GPIO_CFG_GPIOBUF1_ (0x00020000) /* R/W */
# define GPIO_CFG_GPIOBUF0_ (0x00010000) /* R/W */
# define GPIO_CFG_GPIODIR2_ (0x00000400) /* R/W */
# define GPIO_CFG_GPIODIR1_ (0x00000200) /* R/W */
# define GPIO_CFG_GPIODIR0_ (0x00000100) /* R/W */
# define GPIO_CFG_GPIOD4_ (0x00000010) /* R/W */
# define GPIO_CFG_GPIOD3_ (0x00000008) /* R/W */
# define GPIO_CFG_GPIOD2_ (0x00000004) /* R/W */
# define GPIO_CFG_GPIOD1_ (0x00000002) /* R/W */
# define GPIO_CFG_GPIOD0_ (0x00000001) /* R/W */
# define GPT_CFG (0x8C)
# define GPT_CFG_TIMER_EN_ (0x20000000) /* R/W */
# define GPT_CFG_GPT_LOAD_ (0x0000FFFF) /* R/W */
# define GPT_CNT (0x90)
# define GPT_CNT_GPT_CNT_ (0x0000FFFF) /* RO */
# define ENDIAN (0x98)
# define FREE_RUN (0x9C)
# define RX_DROP (0xA0)
# define MAC_CSR_CMD (0xA4)
# define MAC_CSR_CMD_CSR_BUSY_ (0x80000000) /* Self Clearing */
# define MAC_CSR_CMD_R_NOT_W_ (0x40000000) /* R/W */
# define MAC_CSR_CMD_CSR_ADDR_ (0x000000FF) /* R/W */
# define MAC_CSR_DATA (0xA8)
# define AFC_CFG (0xAC)
# define AFC_CFG_AFC_HI_ (0x00FF0000) /* R/W */
# define AFC_CFG_AFC_LO_ (0x0000FF00) /* R/W */
# define AFC_CFG_BACK_DUR_ (0x000000F0) /* R/W */
# define AFC_CFG_FCMULT_ (0x00000008) /* R/W */
# define AFC_CFG_FCBRD_ (0x00000004) /* R/W */
# define AFC_CFG_FCADD_ (0x00000002) /* R/W */
# define AFC_CFG_FCANY_ (0x00000001) /* R/W */
# define E2P_CMD (0xB0)
# define E2P_CMD_EPC_BUSY_ (0x80000000) /* Self Clearing */
# define E2P_CMD_EPC_CMD_ (0x70000000) /* R/W */
# define E2P_CMD_EPC_CMD_READ_ (0x00000000) /* R/W */
# define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) /* R/W */
# define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) /* R/W */
# define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) /* R/W */
# define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) /* R/W */
# define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) /* R/W */
# define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) /* R/W */
# define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) /* R/W */
# define E2P_CMD_EPC_TIMEOUT_ (0x00000200) /* RO */
# define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) /* RO */
# define E2P_CMD_EPC_ADDR_ (0x000000FF) /* R/W */
# define E2P_DATA (0xB4)
# define E2P_DATA_EEPROM_DATA_ (0x000000FF) /* R/W */
/* end of LAN register offsets and bit definitions */
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* MAC Control and Status Register ( Indirect Address )
* Offset ( through the MAC_CSR CMD and DATA port )
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
*/
# define MAC_CR (0x01) /* R/W */
/* MAC_CR - MAC Control Register */
# define MAC_CR_RXALL_ (0x80000000)
// TODO: delete this bit? It is not described in the data sheet.
# define MAC_CR_HBDIS_ (0x10000000)
# define MAC_CR_RCVOWN_ (0x00800000)
# define MAC_CR_LOOPBK_ (0x00200000)
# define MAC_CR_FDPX_ (0x00100000)
# define MAC_CR_MCPAS_ (0x00080000)
# define MAC_CR_PRMS_ (0x00040000)
# define MAC_CR_INVFILT_ (0x00020000)
# define MAC_CR_PASSBAD_ (0x00010000)
# define MAC_CR_HFILT_ (0x00008000)
# define MAC_CR_HPFILT_ (0x00002000)
# define MAC_CR_LCOLL_ (0x00001000)
# define MAC_CR_BCAST_ (0x00000800)
# define MAC_CR_DISRTY_ (0x00000400)
# define MAC_CR_PADSTR_ (0x00000100)
# define MAC_CR_BOLMT_MASK_ (0x000000C0)
# define MAC_CR_DFCHK_ (0x00000020)
# define MAC_CR_TXEN_ (0x00000008)
# define MAC_CR_RXEN_ (0x00000004)
# define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */
# define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */
# define HASHH (0x04) /* R/W */
# define HASHL (0x05) /* R/W */
# define MII_ACC (0x06) /* R/W */
# define MII_ACC_PHY_ADDR_ (0x0000F800)
# define MII_ACC_MIIRINDA_ (0x000007C0)
# define MII_ACC_MII_WRITE_ (0x00000002)
# define MII_ACC_MII_BUSY_ (0x00000001)
# define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */
# define FLOW (0x08) /* R/W */
# define FLOW_FCPT_ (0xFFFF0000)
# define FLOW_FCPASS_ (0x00000004)
# define FLOW_FCEN_ (0x00000002)
# define FLOW_FCBSY_ (0x00000001)
# define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */
# define VLAN1_VTI1_ (0x0000ffff)
# define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */
# define VLAN2_VTI2_ (0x0000ffff)
# define WUFF (0x0B) /* WO */
# define WUCSR (0x0C) /* R/W */
# define WUCSR_GUE_ (0x00000200)
# define WUCSR_WUFR_ (0x00000040)
# define WUCSR_MPR_ (0x00000020)
# define WUCSR_WAKE_EN_ (0x00000004)
# define WUCSR_MPEN_ (0x00000002)
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Chip Specific MII Defines
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* Phy register offsets and bit definitions
*
*/
# define PHY_MODE_CTRL_STS ((u32)17) /* Mode Control/Status Register */
//#define MODE_CTRL_STS_FASTRIP_ ((u16)0x4000)
# define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000)
//#define MODE_CTRL_STS_LOWSQEN_ ((u16)0x0800)
//#define MODE_CTRL_STS_MDPREBP_ ((u16)0x0400)
//#define MODE_CTRL_STS_FARLOOPBACK_ ((u16)0x0200)
//#define MODE_CTRL_STS_FASTEST_ ((u16)0x0100)
//#define MODE_CTRL_STS_REFCLKEN_ ((u16)0x0010)
//#define MODE_CTRL_STS_PHYADBP_ ((u16)0x0008)
//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004)
# define MODE_CTRL_STS_ENERGYON_ ((u16)0x0002)
# define PHY_INT_SRC ((u32)29)
# define PHY_INT_SRC_ENERGY_ON_ ((u16)0x0080)
# define PHY_INT_SRC_ANEG_COMP_ ((u16)0x0040)
# define PHY_INT_SRC_REMOTE_FAULT_ ((u16)0x0020)
# define PHY_INT_SRC_LINK_DOWN_ ((u16)0x0010)
# define PHY_INT_SRC_ANEG_LP_ACK_ ((u16)0x0008)
# define PHY_INT_SRC_PAR_DET_FAULT_ ((u16)0x0004)
# define PHY_INT_SRC_ANEG_PGRX_ ((u16)0x0002)
# define PHY_INT_MASK ((u32)30)
# define PHY_INT_MASK_ENERGY_ON_ ((u16)0x0080)
# define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
# define PHY_INT_MASK_REMOTE_FAULT_ ((u16)0x0020)
# define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
# define PHY_INT_MASK_ANEG_LP_ACK_ ((u16)0x0008)
# define PHY_INT_MASK_PAR_DET_FAULT_ ((u16)0x0004)
# define PHY_INT_MASK_ANEG_PGRX_ ((u16)0x0002)
# define PHY_SPECIAL ((u32)31)
# define PHY_SPECIAL_ANEG_DONE_ ((u16)0x1000)
# define PHY_SPECIAL_RES_ ((u16)0x0040)
# define PHY_SPECIAL_RES_MASK_ ((u16)0x0FE1)
# define PHY_SPECIAL_SPD_ ((u16)0x001C)
# define PHY_SPECIAL_SPD_10HALF_ ((u16)0x0004)
# define PHY_SPECIAL_SPD_10FULL_ ((u16)0x0014)
# define PHY_SPECIAL_SPD_100HALF_ ((u16)0x0008)
# define PHY_SPECIAL_SPD_100FULL_ ((u16)0x0018)
# define LAN911X_INTERNAL_PHY_ID (0x0007C000)
/* Chip ID values */
# define CHIP_9115 0x115
# define CHIP_9116 0x116
# define CHIP_9117 0x117
# define CHIP_9118 0x118
struct chip_id {
u16 id ;
char * name ;
} ;
2006-04-21 01:39:14 +04:00
2006-04-20 07:24:51 +04:00
static const struct chip_id chip_ids [ ] = {
{ CHIP_9115 , " LAN9115 " } ,
{ CHIP_9116 , " LAN9116 " } ,
{ CHIP_9117 , " LAN9117 " } ,
{ CHIP_9118 , " LAN9118 " } ,
{ 0 , NULL } ,
} ;
# define IS_REV_A(x) ((x & 0xFFFF)==0)
/*
* Macros to abstract register access according to the data bus
* capabilities . Please use those and not the in / out primitives .
*/
/* FIFO read/write macros */
# define SMC_PUSH_DATA(p, l) SMC_outsl( ioaddr, TX_DATA_FIFO, p, (l) >> 2 )
# define SMC_PULL_DATA(p, l) SMC_insl ( ioaddr, RX_DATA_FIFO, p, (l) >> 2 )
# define SMC_SET_TX_FIFO(x) SMC_outl( x, ioaddr, TX_DATA_FIFO )
# define SMC_GET_RX_FIFO() SMC_inl( ioaddr, RX_DATA_FIFO )
/* I/O mapped register read/write macros */
# define SMC_GET_TX_STS_FIFO() SMC_inl( ioaddr, TX_STATUS_FIFO )
# define SMC_GET_RX_STS_FIFO() SMC_inl( ioaddr, RX_STATUS_FIFO )
# define SMC_GET_RX_STS_FIFO_PEEK() SMC_inl( ioaddr, RX_STATUS_FIFO_PEEK )
# define SMC_GET_PN() (SMC_inl( ioaddr, ID_REV ) >> 16)
# define SMC_GET_REV() (SMC_inl( ioaddr, ID_REV ) & 0xFFFF)
# define SMC_GET_IRQ_CFG() SMC_inl( ioaddr, INT_CFG )
# define SMC_SET_IRQ_CFG(x) SMC_outl( x, ioaddr, INT_CFG )
# define SMC_GET_INT() SMC_inl( ioaddr, INT_STS )
# define SMC_ACK_INT(x) SMC_outl( x, ioaddr, INT_STS )
# define SMC_GET_INT_EN() SMC_inl( ioaddr, INT_EN )
# define SMC_SET_INT_EN(x) SMC_outl( x, ioaddr, INT_EN )
# define SMC_GET_BYTE_TEST() SMC_inl( ioaddr, BYTE_TEST )
# define SMC_SET_BYTE_TEST(x) SMC_outl( x, ioaddr, BYTE_TEST )
# define SMC_GET_FIFO_INT() SMC_inl( ioaddr, FIFO_INT )
# define SMC_SET_FIFO_INT(x) SMC_outl( x, ioaddr, FIFO_INT )
# define SMC_SET_FIFO_TDA(x) \
do { \
unsigned long __flags ; \
int __mask ; \
local_irq_save ( __flags ) ; \
__mask = SMC_GET_FIFO_INT ( ) & ~ ( 0xFF < < 24 ) ; \
SMC_SET_FIFO_INT ( __mask | ( x ) < < 24 ) ; \
local_irq_restore ( __flags ) ; \
} while ( 0 )
# define SMC_SET_FIFO_TSL(x) \
do { \
unsigned long __flags ; \
int __mask ; \
local_irq_save ( __flags ) ; \
__mask = SMC_GET_FIFO_INT ( ) & ~ ( 0xFF < < 16 ) ; \
SMC_SET_FIFO_INT ( __mask | ( ( ( x ) & 0xFF ) < < 16 ) ) ; \
local_irq_restore ( __flags ) ; \
} while ( 0 )
# define SMC_SET_FIFO_RSA(x) \
do { \
unsigned long __flags ; \
int __mask ; \
local_irq_save ( __flags ) ; \
__mask = SMC_GET_FIFO_INT ( ) & ~ ( 0xFF < < 8 ) ; \
SMC_SET_FIFO_INT ( __mask | ( ( ( x ) & 0xFF ) < < 8 ) ) ; \
local_irq_restore ( __flags ) ; \
} while ( 0 )
# define SMC_SET_FIFO_RSL(x) \
do { \
unsigned long __flags ; \
int __mask ; \
local_irq_save ( __flags ) ; \
__mask = SMC_GET_FIFO_INT ( ) & ~ 0xFF ; \
SMC_SET_FIFO_INT ( __mask | ( ( x ) & 0xFF ) ) ; \
local_irq_restore ( __flags ) ; \
} while ( 0 )
# define SMC_GET_RX_CFG() SMC_inl( ioaddr, RX_CFG )
# define SMC_SET_RX_CFG(x) SMC_outl( x, ioaddr, RX_CFG )
# define SMC_GET_TX_CFG() SMC_inl( ioaddr, TX_CFG )
# define SMC_SET_TX_CFG(x) SMC_outl( x, ioaddr, TX_CFG )
# define SMC_GET_HW_CFG() SMC_inl( ioaddr, HW_CFG )
# define SMC_SET_HW_CFG(x) SMC_outl( x, ioaddr, HW_CFG )
# define SMC_GET_RX_DP_CTRL() SMC_inl( ioaddr, RX_DP_CTRL )
# define SMC_SET_RX_DP_CTRL(x) SMC_outl( x, ioaddr, RX_DP_CTRL )
# define SMC_GET_PMT_CTRL() SMC_inl( ioaddr, PMT_CTRL )
# define SMC_SET_PMT_CTRL(x) SMC_outl( x, ioaddr, PMT_CTRL )
# define SMC_GET_GPIO_CFG() SMC_inl( ioaddr, GPIO_CFG )
# define SMC_SET_GPIO_CFG(x) SMC_outl( x, ioaddr, GPIO_CFG )
# define SMC_GET_RX_FIFO_INF() SMC_inl( ioaddr, RX_FIFO_INF )
# define SMC_SET_RX_FIFO_INF(x) SMC_outl( x, ioaddr, RX_FIFO_INF )
# define SMC_GET_TX_FIFO_INF() SMC_inl( ioaddr, TX_FIFO_INF )
# define SMC_SET_TX_FIFO_INF(x) SMC_outl( x, ioaddr, TX_FIFO_INF )
# define SMC_GET_GPT_CFG() SMC_inl( ioaddr, GPT_CFG )
# define SMC_SET_GPT_CFG(x) SMC_outl( x, ioaddr, GPT_CFG )
# define SMC_GET_RX_DROP() SMC_inl( ioaddr, RX_DROP )
# define SMC_SET_RX_DROP(x) SMC_outl( x, ioaddr, RX_DROP )
# define SMC_GET_MAC_CMD() SMC_inl( ioaddr, MAC_CSR_CMD )
# define SMC_SET_MAC_CMD(x) SMC_outl( x, ioaddr, MAC_CSR_CMD )
# define SMC_GET_MAC_DATA() SMC_inl( ioaddr, MAC_CSR_DATA )
# define SMC_SET_MAC_DATA(x) SMC_outl( x, ioaddr, MAC_CSR_DATA )
# define SMC_GET_AFC_CFG() SMC_inl( ioaddr, AFC_CFG )
# define SMC_SET_AFC_CFG(x) SMC_outl( x, ioaddr, AFC_CFG )
# define SMC_GET_E2P_CMD() SMC_inl( ioaddr, E2P_CMD )
# define SMC_SET_E2P_CMD(x) SMC_outl( x, ioaddr, E2P_CMD )
# define SMC_GET_E2P_DATA() SMC_inl( ioaddr, E2P_DATA )
# define SMC_SET_E2P_DATA(x) SMC_outl( x, ioaddr, E2P_DATA )
/* MAC register read/write macros */
# define SMC_GET_MAC_CSR(a,v) \
do { \
while ( SMC_GET_MAC_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
SMC_SET_MAC_CMD ( MAC_CSR_CMD_CSR_BUSY_ | \
MAC_CSR_CMD_R_NOT_W_ | ( a ) ) ; \
while ( SMC_GET_MAC_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
v = SMC_GET_MAC_DATA ( ) ; \
} while ( 0 )
# define SMC_SET_MAC_CSR(a,v) \
do { \
while ( SMC_GET_MAC_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
SMC_SET_MAC_DATA ( v ) ; \
SMC_SET_MAC_CMD ( MAC_CSR_CMD_CSR_BUSY_ | ( a ) ) ; \
while ( SMC_GET_MAC_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
} while ( 0 )
# define SMC_GET_MAC_CR(x) SMC_GET_MAC_CSR( MAC_CR, x )
# define SMC_SET_MAC_CR(x) SMC_SET_MAC_CSR( MAC_CR, x )
# define SMC_GET_ADDRH(x) SMC_GET_MAC_CSR( ADDRH, x )
# define SMC_SET_ADDRH(x) SMC_SET_MAC_CSR( ADDRH, x )
# define SMC_GET_ADDRL(x) SMC_GET_MAC_CSR( ADDRL, x )
# define SMC_SET_ADDRL(x) SMC_SET_MAC_CSR( ADDRL, x )
# define SMC_GET_HASHH(x) SMC_GET_MAC_CSR( HASHH, x )
# define SMC_SET_HASHH(x) SMC_SET_MAC_CSR( HASHH, x )
# define SMC_GET_HASHL(x) SMC_GET_MAC_CSR( HASHL, x )
# define SMC_SET_HASHL(x) SMC_SET_MAC_CSR( HASHL, x )
# define SMC_GET_MII_ACC(x) SMC_GET_MAC_CSR( MII_ACC, x )
# define SMC_SET_MII_ACC(x) SMC_SET_MAC_CSR( MII_ACC, x )
# define SMC_GET_MII_DATA(x) SMC_GET_MAC_CSR( MII_DATA, x )
# define SMC_SET_MII_DATA(x) SMC_SET_MAC_CSR( MII_DATA, x )
# define SMC_GET_FLOW(x) SMC_GET_MAC_CSR( FLOW, x )
# define SMC_SET_FLOW(x) SMC_SET_MAC_CSR( FLOW, x )
# define SMC_GET_VLAN1(x) SMC_GET_MAC_CSR( VLAN1, x )
# define SMC_SET_VLAN1(x) SMC_SET_MAC_CSR( VLAN1, x )
# define SMC_GET_VLAN2(x) SMC_GET_MAC_CSR( VLAN2, x )
# define SMC_SET_VLAN2(x) SMC_SET_MAC_CSR( VLAN2, x )
# define SMC_SET_WUFF(x) SMC_SET_MAC_CSR( WUFF, x )
# define SMC_GET_WUCSR(x) SMC_GET_MAC_CSR( WUCSR, x )
# define SMC_SET_WUCSR(x) SMC_SET_MAC_CSR( WUCSR, x )
/* PHY register read/write macros */
# define SMC_GET_MII(a,phy,v) \
do { \
u32 __v ; \
do { \
SMC_GET_MII_ACC ( __v ) ; \
} while ( __v & MII_ACC_MII_BUSY_ ) ; \
SMC_SET_MII_ACC ( ( ( phy ) < < 11 ) | ( ( a ) < < 6 ) | \
MII_ACC_MII_BUSY_ ) ; \
do { \
SMC_GET_MII_ACC ( __v ) ; \
} while ( __v & MII_ACC_MII_BUSY_ ) ; \
SMC_GET_MII_DATA ( v ) ; \
} while ( 0 )
# define SMC_SET_MII(a,phy,v) \
do { \
u32 __v ; \
do { \
SMC_GET_MII_ACC ( __v ) ; \
} while ( __v & MII_ACC_MII_BUSY_ ) ; \
SMC_SET_MII_DATA ( v ) ; \
SMC_SET_MII_ACC ( ( ( phy ) < < 11 ) | ( ( a ) < < 6 ) | \
MII_ACC_MII_BUSY_ | \
MII_ACC_MII_WRITE_ ) ; \
do { \
SMC_GET_MII_ACC ( __v ) ; \
} while ( __v & MII_ACC_MII_BUSY_ ) ; \
} while ( 0 )
# define SMC_GET_PHY_BMCR(phy,x) SMC_GET_MII( MII_BMCR, phy, x )
# define SMC_SET_PHY_BMCR(phy,x) SMC_SET_MII( MII_BMCR, phy, x )
# define SMC_GET_PHY_BMSR(phy,x) SMC_GET_MII( MII_BMSR, phy, x )
# define SMC_GET_PHY_ID1(phy,x) SMC_GET_MII( MII_PHYSID1, phy, x )
# define SMC_GET_PHY_ID2(phy,x) SMC_GET_MII( MII_PHYSID2, phy, x )
# define SMC_GET_PHY_MII_ADV(phy,x) SMC_GET_MII( MII_ADVERTISE, phy, x )
# define SMC_SET_PHY_MII_ADV(phy,x) SMC_SET_MII( MII_ADVERTISE, phy, x )
# define SMC_GET_PHY_MII_LPA(phy,x) SMC_GET_MII( MII_LPA, phy, x )
# define SMC_SET_PHY_MII_LPA(phy,x) SMC_SET_MII( MII_LPA, phy, x )
# define SMC_GET_PHY_CTRL_STS(phy,x) SMC_GET_MII( PHY_MODE_CTRL_STS, phy, x )
# define SMC_SET_PHY_CTRL_STS(phy,x) SMC_SET_MII( PHY_MODE_CTRL_STS, phy, x )
# define SMC_GET_PHY_INT_SRC(phy,x) SMC_GET_MII( PHY_INT_SRC, phy, x )
# define SMC_SET_PHY_INT_SRC(phy,x) SMC_SET_MII( PHY_INT_SRC, phy, x )
# define SMC_GET_PHY_INT_MASK(phy,x) SMC_GET_MII( PHY_INT_MASK, phy, x )
# define SMC_SET_PHY_INT_MASK(phy,x) SMC_SET_MII( PHY_INT_MASK, phy, x )
# define SMC_GET_PHY_SPECIAL(phy,x) SMC_GET_MII( PHY_SPECIAL, phy, x )
/* Misc read/write macros */
# ifndef SMC_GET_MAC_ADDR
# define SMC_GET_MAC_ADDR(addr) \
do { \
unsigned int __v ; \
\
SMC_GET_MAC_CSR ( ADDRL , __v ) ; \
addr [ 0 ] = __v ; addr [ 1 ] = __v > > 8 ; \
addr [ 2 ] = __v > > 16 ; addr [ 3 ] = __v > > 24 ; \
SMC_GET_MAC_CSR ( ADDRH , __v ) ; \
addr [ 4 ] = __v ; addr [ 5 ] = __v > > 8 ; \
} while ( 0 )
# endif
# define SMC_SET_MAC_ADDR(addr) \
do { \
SMC_SET_MAC_CSR ( ADDRL , \
addr [ 0 ] | \
( addr [ 1 ] < < 8 ) | \
( addr [ 2 ] < < 16 ) | \
( addr [ 3 ] < < 24 ) ) ; \
SMC_SET_MAC_CSR ( ADDRH , addr [ 4 ] | ( addr [ 5 ] < < 8 ) ) ; \
} while ( 0 )
# define SMC_WRITE_EEPROM_CMD(cmd, addr) \
do { \
while ( SMC_GET_E2P_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
SMC_SET_MAC_CMD ( MAC_CSR_CMD_R_NOT_W_ | a ) ; \
while ( SMC_GET_MAC_CMD ( ) & MAC_CSR_CMD_CSR_BUSY_ ) ; \
} while ( 0 )
# endif /* _SMC911X_H_ */
