2007-07-09 20:51:58 +04:00
/*
* Real - Time Scheduling Class ( mapped to the SCHED_FIFO and SCHED_RR
* policies )
*/
/*
* Update the current task ' s runtime statistics . Skip current tasks that
* are not in our scheduling class .
*/
2007-10-15 19:00:13 +04:00
static void update_curr_rt ( struct rq * rq )
2007-07-09 20:51:58 +04:00
{
struct task_struct * curr = rq - > curr ;
u64 delta_exec ;
if ( ! task_has_rt_policy ( curr ) )
return ;
2007-08-09 13:16:47 +04:00
delta_exec = rq - > clock - curr - > se . exec_start ;
2007-07-09 20:51:58 +04:00
if ( unlikely ( ( s64 ) delta_exec < 0 ) )
delta_exec = 0 ;
2007-08-02 19:41:40 +04:00
schedstat_set ( curr - > se . exec_max , max ( curr - > se . exec_max , delta_exec ) ) ;
2007-07-09 20:51:58 +04:00
curr - > se . sum_exec_runtime + = delta_exec ;
2007-08-09 13:16:47 +04:00
curr - > se . exec_start = rq - > clock ;
2007-07-09 20:51:58 +04:00
}
2007-08-09 13:16:48 +04:00
static void enqueue_task_rt ( struct rq * rq , struct task_struct * p , int wakeup )
2007-07-09 20:51:58 +04:00
{
struct rt_prio_array * array = & rq - > rt . active ;
list_add_tail ( & p - > run_list , array - > queue + p - > prio ) ;
__set_bit ( p - > prio , array - > bitmap ) ;
}
/*
* Adding / removing a task to / from a priority array :
*/
2007-08-09 13:16:48 +04:00
static void dequeue_task_rt ( struct rq * rq , struct task_struct * p , int sleep )
2007-07-09 20:51:58 +04:00
{
struct rt_prio_array * array = & rq - > rt . active ;
2007-08-09 13:16:48 +04:00
update_curr_rt ( rq ) ;
2007-07-09 20:51:58 +04:00
list_del ( & p - > run_list ) ;
if ( list_empty ( array - > queue + p - > prio ) )
__clear_bit ( p - > prio , array - > bitmap ) ;
}
/*
* Put task to the end of the run list without the overhead of dequeue
* followed by enqueue .
*/
static void requeue_task_rt ( struct rq * rq , struct task_struct * p )
{
struct rt_prio_array * array = & rq - > rt . active ;
list_move_tail ( & p - > run_list , array - > queue + p - > prio ) ;
}
static void
2007-10-15 19:00:08 +04:00
yield_task_rt ( struct rq * rq )
2007-07-09 20:51:58 +04:00
{
2007-10-15 19:00:08 +04:00
requeue_task_rt ( rq , rq - > curr ) ;
2007-07-09 20:51:58 +04:00
}
/*
* Preempt the current task with a newly woken task if needed :
*/
static void check_preempt_curr_rt ( struct rq * rq , struct task_struct * p )
{
if ( p - > prio < rq - > curr - > prio )
resched_task ( rq - > curr ) ;
}
2007-08-09 13:16:48 +04:00
static struct task_struct * pick_next_task_rt ( struct rq * rq )
2007-07-09 20:51:58 +04:00
{
struct rt_prio_array * array = & rq - > rt . active ;
struct task_struct * next ;
struct list_head * queue ;
int idx ;
idx = sched_find_first_bit ( array - > bitmap ) ;
if ( idx > = MAX_RT_PRIO )
return NULL ;
queue = array - > queue + idx ;
next = list_entry ( queue - > next , struct task_struct , run_list ) ;
2007-08-09 13:16:47 +04:00
next - > se . exec_start = rq - > clock ;
2007-07-09 20:51:58 +04:00
return next ;
}
2007-08-09 13:16:49 +04:00
static void put_prev_task_rt ( struct rq * rq , struct task_struct * p )
2007-07-09 20:51:58 +04:00
{
2007-08-09 13:16:48 +04:00
update_curr_rt ( rq ) ;
2007-07-09 20:51:58 +04:00
p - > se . exec_start = 0 ;
}
/*
* Load - balancing iterator . Note : while the runqueue stays locked
* during the whole iteration , the current task might be
* dequeued so the iterator has to be dequeue - safe . Here we
* achieve that by always pre - iterating before returning
* the current task :
*/
static struct task_struct * load_balance_start_rt ( void * arg )
{
struct rq * rq = arg ;
struct rt_prio_array * array = & rq - > rt . active ;
struct list_head * head , * curr ;
struct task_struct * p ;
int idx ;
idx = sched_find_first_bit ( array - > bitmap ) ;
if ( idx > = MAX_RT_PRIO )
return NULL ;
head = array - > queue + idx ;
curr = head - > prev ;
p = list_entry ( curr , struct task_struct , run_list ) ;
curr = curr - > prev ;
rq - > rt . rt_load_balance_idx = idx ;
rq - > rt . rt_load_balance_head = head ;
rq - > rt . rt_load_balance_curr = curr ;
return p ;
}
static struct task_struct * load_balance_next_rt ( void * arg )
{
struct rq * rq = arg ;
struct rt_prio_array * array = & rq - > rt . active ;
struct list_head * head , * curr ;
struct task_struct * p ;
int idx ;
idx = rq - > rt . rt_load_balance_idx ;
head = rq - > rt . rt_load_balance_head ;
curr = rq - > rt . rt_load_balance_curr ;
/*
* If we arrived back to the head again then
* iterate to the next queue ( if any ) :
*/
if ( unlikely ( head = = curr ) ) {
int next_idx = find_next_bit ( array - > bitmap , MAX_RT_PRIO , idx + 1 ) ;
if ( next_idx > = MAX_RT_PRIO )
return NULL ;
idx = next_idx ;
head = array - > queue + idx ;
curr = head - > prev ;
rq - > rt . rt_load_balance_idx = idx ;
rq - > rt . rt_load_balance_head = head ;
}
p = list_entry ( curr , struct task_struct , run_list ) ;
curr = curr - > prev ;
rq - > rt . rt_load_balance_curr = curr ;
return p ;
}
sched: simplify move_tasks()
The move_tasks() function is currently multiplexed with two distinct
capabilities:
1. attempt to move a specified amount of weighted load from one run
queue to another; and
2. attempt to move a specified number of tasks from one run queue to
another.
The first of these capabilities is used in two places, load_balance()
and load_balance_idle(), and in both of these cases the return value of
move_tasks() is used purely to decide if tasks/load were moved and no
notice of the actual number of tasks moved is taken.
The second capability is used in exactly one place,
active_load_balance(), to attempt to move exactly one task and, as
before, the return value is only used as an indicator of success or failure.
This multiplexing of sched_task() was introduced, by me, as part of the
smpnice patches and was motivated by the fact that the alternative, one
function to move specified load and one to move a single task, would
have led to two functions of roughly the same complexity as the old
move_tasks() (or the new balance_tasks()). However, the new modular
design of the new CFS scheduler allows a simpler solution to be adopted
and this patch addresses that solution by:
1. adding a new function, move_one_task(), to be used by
active_load_balance(); and
2. making move_tasks() a single purpose function that tries to move a
specified weighted load and returns 1 for success and 0 for failure.
One of the consequences of these changes is that neither move_one_task()
or the new move_tasks() care how many tasks sched_class.load_balance()
moves and this enables its interface to be simplified by returning the
amount of load moved as its result and removing the load_moved pointer
from the argument list. This helps simplify the new move_tasks() and
slightly reduces the amount of work done in each of
sched_class.load_balance()'s implementations.
Further simplification, e.g. changes to balance_tasks(), are possible
but (slightly) complicated by the special needs of load_balance_fair()
so I've left them to a later patch (if this one gets accepted).
NB Since move_tasks() gets called with two run queue locks held even
small reductions in overhead are worthwhile.
[ mingo@elte.hu ]
this change also reduces code size nicely:
text data bss dec hex filename
39216 3618 24 42858 a76a sched.o.before
39173 3618 24 42815 a73f sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 13:16:46 +04:00
static unsigned long
2007-07-09 20:51:58 +04:00
load_balance_rt ( struct rq * this_rq , int this_cpu , struct rq * busiest ,
unsigned long max_nr_move , unsigned long max_load_move ,
struct sched_domain * sd , enum cpu_idle_type idle ,
2007-08-09 13:16:46 +04:00
int * all_pinned , int * this_best_prio )
2007-07-09 20:51:58 +04:00
{
int nr_moved ;
struct rq_iterator rt_rq_iterator ;
sched: simplify move_tasks()
The move_tasks() function is currently multiplexed with two distinct
capabilities:
1. attempt to move a specified amount of weighted load from one run
queue to another; and
2. attempt to move a specified number of tasks from one run queue to
another.
The first of these capabilities is used in two places, load_balance()
and load_balance_idle(), and in both of these cases the return value of
move_tasks() is used purely to decide if tasks/load were moved and no
notice of the actual number of tasks moved is taken.
The second capability is used in exactly one place,
active_load_balance(), to attempt to move exactly one task and, as
before, the return value is only used as an indicator of success or failure.
This multiplexing of sched_task() was introduced, by me, as part of the
smpnice patches and was motivated by the fact that the alternative, one
function to move specified load and one to move a single task, would
have led to two functions of roughly the same complexity as the old
move_tasks() (or the new balance_tasks()). However, the new modular
design of the new CFS scheduler allows a simpler solution to be adopted
and this patch addresses that solution by:
1. adding a new function, move_one_task(), to be used by
active_load_balance(); and
2. making move_tasks() a single purpose function that tries to move a
specified weighted load and returns 1 for success and 0 for failure.
One of the consequences of these changes is that neither move_one_task()
or the new move_tasks() care how many tasks sched_class.load_balance()
moves and this enables its interface to be simplified by returning the
amount of load moved as its result and removing the load_moved pointer
from the argument list. This helps simplify the new move_tasks() and
slightly reduces the amount of work done in each of
sched_class.load_balance()'s implementations.
Further simplification, e.g. changes to balance_tasks(), are possible
but (slightly) complicated by the special needs of load_balance_fair()
so I've left them to a later patch (if this one gets accepted).
NB Since move_tasks() gets called with two run queue locks held even
small reductions in overhead are worthwhile.
[ mingo@elte.hu ]
this change also reduces code size nicely:
text data bss dec hex filename
39216 3618 24 42858 a76a sched.o.before
39173 3618 24 42815 a73f sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 13:16:46 +04:00
unsigned long load_moved ;
2007-07-09 20:51:58 +04:00
rt_rq_iterator . start = load_balance_start_rt ;
rt_rq_iterator . next = load_balance_next_rt ;
/* pass 'busiest' rq argument into
* load_balance_ [ start | next ] _rt iterators
*/
rt_rq_iterator . arg = busiest ;
nr_moved = balance_tasks ( this_rq , this_cpu , busiest , max_nr_move ,
sched: simplify move_tasks()
The move_tasks() function is currently multiplexed with two distinct
capabilities:
1. attempt to move a specified amount of weighted load from one run
queue to another; and
2. attempt to move a specified number of tasks from one run queue to
another.
The first of these capabilities is used in two places, load_balance()
and load_balance_idle(), and in both of these cases the return value of
move_tasks() is used purely to decide if tasks/load were moved and no
notice of the actual number of tasks moved is taken.
The second capability is used in exactly one place,
active_load_balance(), to attempt to move exactly one task and, as
before, the return value is only used as an indicator of success or failure.
This multiplexing of sched_task() was introduced, by me, as part of the
smpnice patches and was motivated by the fact that the alternative, one
function to move specified load and one to move a single task, would
have led to two functions of roughly the same complexity as the old
move_tasks() (or the new balance_tasks()). However, the new modular
design of the new CFS scheduler allows a simpler solution to be adopted
and this patch addresses that solution by:
1. adding a new function, move_one_task(), to be used by
active_load_balance(); and
2. making move_tasks() a single purpose function that tries to move a
specified weighted load and returns 1 for success and 0 for failure.
One of the consequences of these changes is that neither move_one_task()
or the new move_tasks() care how many tasks sched_class.load_balance()
moves and this enables its interface to be simplified by returning the
amount of load moved as its result and removing the load_moved pointer
from the argument list. This helps simplify the new move_tasks() and
slightly reduces the amount of work done in each of
sched_class.load_balance()'s implementations.
Further simplification, e.g. changes to balance_tasks(), are possible
but (slightly) complicated by the special needs of load_balance_fair()
so I've left them to a later patch (if this one gets accepted).
NB Since move_tasks() gets called with two run queue locks held even
small reductions in overhead are worthwhile.
[ mingo@elte.hu ]
this change also reduces code size nicely:
text data bss dec hex filename
39216 3618 24 42858 a76a sched.o.before
39173 3618 24 42815 a73f sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 13:16:46 +04:00
max_load_move , sd , idle , all_pinned , & load_moved ,
2007-08-09 13:16:46 +04:00
this_best_prio , & rt_rq_iterator ) ;
2007-07-09 20:51:58 +04:00
sched: simplify move_tasks()
The move_tasks() function is currently multiplexed with two distinct
capabilities:
1. attempt to move a specified amount of weighted load from one run
queue to another; and
2. attempt to move a specified number of tasks from one run queue to
another.
The first of these capabilities is used in two places, load_balance()
and load_balance_idle(), and in both of these cases the return value of
move_tasks() is used purely to decide if tasks/load were moved and no
notice of the actual number of tasks moved is taken.
The second capability is used in exactly one place,
active_load_balance(), to attempt to move exactly one task and, as
before, the return value is only used as an indicator of success or failure.
This multiplexing of sched_task() was introduced, by me, as part of the
smpnice patches and was motivated by the fact that the alternative, one
function to move specified load and one to move a single task, would
have led to two functions of roughly the same complexity as the old
move_tasks() (or the new balance_tasks()). However, the new modular
design of the new CFS scheduler allows a simpler solution to be adopted
and this patch addresses that solution by:
1. adding a new function, move_one_task(), to be used by
active_load_balance(); and
2. making move_tasks() a single purpose function that tries to move a
specified weighted load and returns 1 for success and 0 for failure.
One of the consequences of these changes is that neither move_one_task()
or the new move_tasks() care how many tasks sched_class.load_balance()
moves and this enables its interface to be simplified by returning the
amount of load moved as its result and removing the load_moved pointer
from the argument list. This helps simplify the new move_tasks() and
slightly reduces the amount of work done in each of
sched_class.load_balance()'s implementations.
Further simplification, e.g. changes to balance_tasks(), are possible
but (slightly) complicated by the special needs of load_balance_fair()
so I've left them to a later patch (if this one gets accepted).
NB Since move_tasks() gets called with two run queue locks held even
small reductions in overhead are worthwhile.
[ mingo@elte.hu ]
this change also reduces code size nicely:
text data bss dec hex filename
39216 3618 24 42858 a76a sched.o.before
39173 3618 24 42815 a73f sched.o.after
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 13:16:46 +04:00
return load_moved ;
2007-07-09 20:51:58 +04:00
}
static void task_tick_rt ( struct rq * rq , struct task_struct * p )
{
/*
* RR tasks need a special form of timeslice management .
* FIFO tasks have no timeslices .
*/
if ( p - > policy ! = SCHED_RR )
return ;
if ( - - p - > time_slice )
return ;
2007-10-15 19:00:13 +04:00
p - > time_slice = DEF_TIMESLICE ;
2007-07-09 20:51:58 +04:00
2007-08-24 22:39:10 +04:00
/*
* Requeue to the end of queue if we are not the only element
* on the queue :
*/
if ( p - > run_list . prev ! = p - > run_list . next ) {
requeue_task_rt ( rq , p ) ;
set_tsk_need_resched ( p ) ;
}
2007-07-09 20:51:58 +04:00
}
2007-10-15 19:00:08 +04:00
static void set_curr_task_rt ( struct rq * rq )
{
struct task_struct * p = rq - > curr ;
p - > se . exec_start = rq - > clock ;
}
2007-10-15 19:00:12 +04:00
const struct sched_class rt_sched_class = {
. next = & fair_sched_class ,
2007-07-09 20:51:58 +04:00
. enqueue_task = enqueue_task_rt ,
. dequeue_task = dequeue_task_rt ,
. yield_task = yield_task_rt ,
. check_preempt_curr = check_preempt_curr_rt ,
. pick_next_task = pick_next_task_rt ,
. put_prev_task = put_prev_task_rt ,
. load_balance = load_balance_rt ,
2007-10-15 19:00:08 +04:00
. set_curr_task = set_curr_task_rt ,
2007-07-09 20:51:58 +04:00
. task_tick = task_tick_rt ,
} ;