linux/net/dccp/dccp.h

469 lines
15 KiB
C
Raw Normal View History

#ifndef _DCCP_H
#define _DCCP_H
/*
* net/dccp/dccp.h
*
* An implementation of the DCCP protocol
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/dccp.h>
#include <linux/ktime.h>
#include <net/snmp.h>
#include <net/sock.h>
#include <net/tcp.h>
#include "ackvec.h"
/*
* DCCP - specific warning and debugging macros.
*/
#define DCCP_WARN(fmt, a...) LIMIT_NETDEBUG(KERN_WARNING "%s: " fmt, \
__func__, ##a)
#define DCCP_CRIT(fmt, a...) printk(KERN_CRIT fmt " at %s:%d/%s()\n", ##a, \
__FILE__, __LINE__, __func__)
#define DCCP_BUG(a...) do { DCCP_CRIT("BUG: " a); dump_stack(); } while(0)
#define DCCP_BUG_ON(cond) do { if (unlikely((cond) != 0)) \
DCCP_BUG("\"%s\" holds (exception!)", \
__stringify(cond)); \
} while (0)
#define DCCP_PRINTK(enable, fmt, args...) do { if (enable) \
printk(fmt, ##args); \
} while(0)
#define DCCP_PR_DEBUG(enable, fmt, a...) DCCP_PRINTK(enable, KERN_DEBUG \
"%s: " fmt, __func__, ##a)
#ifdef CONFIG_IP_DCCP_DEBUG
extern int dccp_debug;
#define dccp_pr_debug(format, a...) DCCP_PR_DEBUG(dccp_debug, format, ##a)
#define dccp_pr_debug_cat(format, a...) DCCP_PRINTK(dccp_debug, format, ##a)
#define dccp_debug(fmt, a...) dccp_pr_debug_cat(KERN_DEBUG fmt, ##a)
#else
#define dccp_pr_debug(format, a...)
#define dccp_pr_debug_cat(format, a...)
#define dccp_debug(format, a...)
#endif
extern struct inet_hashinfo dccp_hashinfo;
extern struct percpu_counter dccp_orphan_count;
extern void dccp_time_wait(struct sock *sk, int state, int timeo);
/*
* Set safe upper bounds for header and option length. Since Data Offset is 8
* bits (RFC 4340, sec. 5.1), the total header length can never be more than
* 4 * 255 = 1020 bytes. The largest possible header length is 28 bytes (X=1):
* - DCCP-Response with ACK Subheader and 4 bytes of Service code OR
* - DCCP-Reset with ACK Subheader and 4 bytes of Reset Code fields
* Hence a safe upper bound for the maximum option length is 1020-28 = 992
*/
dccp: Do not let initial option overhead shrink the MPS This fixes a problem caused by the overlap of the connection-setup and established-state phases of DCCP connections. During connection setup, the client retransmits Confirm Feature-Negotiation options until a response from the server signals that it can move from the half-established PARTOPEN into the OPEN state, whereupon the connection is fully established on both ends (RFC 4340, 8.1.5). However, since the client may already send data while it is in the PARTOPEN state, consequences arise for the Maximum Packet Size: the problem is that the initial option overhead is much higher than for the subsequent established phase, as it involves potentially many variable-length list-type options (server-priority options, RFC 4340, 6.4). Applying the standard MPS is insufficient here: especially with larger payloads this can lead to annoying, counter-intuitive EMSGSIZE errors. On the other hand, reducing the MPS available for the established phase by the added initial overhead is highly wasteful and inefficient. The solution chosen therefore is a two-phase strategy: If the payload length of the DataAck in PARTOPEN is too large, an Ack is sent to carry the options, and the feature-negotiation list is then flushed. This means that the server gets two Acks for one Response. If both Acks get lost, it is probably better to restart the connection anyway and devising yet another special-case does not seem worth the extra complexity. The result is a higher utilisation of the available packet space for the data transmission phase (established state) of a connection. The patch (over-)estimates the initial overhead to be 32*4 bytes -- commonly seen values were around 90 bytes for initial feature-negotiation options. It uses sizeof(u32) to mean "aligned units of 4 bytes". For consistency, another use of 4-byte alignment is adapted. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-28 01:38:29 +03:00
#define MAX_DCCP_SPECIFIC_HEADER (255 * sizeof(uint32_t))
#define DCCP_MAX_PACKET_HDR 28
#define DCCP_MAX_OPT_LEN (MAX_DCCP_SPECIFIC_HEADER - DCCP_MAX_PACKET_HDR)
#define MAX_DCCP_HEADER (MAX_DCCP_SPECIFIC_HEADER + MAX_HEADER)
dccp: Do not let initial option overhead shrink the MPS This fixes a problem caused by the overlap of the connection-setup and established-state phases of DCCP connections. During connection setup, the client retransmits Confirm Feature-Negotiation options until a response from the server signals that it can move from the half-established PARTOPEN into the OPEN state, whereupon the connection is fully established on both ends (RFC 4340, 8.1.5). However, since the client may already send data while it is in the PARTOPEN state, consequences arise for the Maximum Packet Size: the problem is that the initial option overhead is much higher than for the subsequent established phase, as it involves potentially many variable-length list-type options (server-priority options, RFC 4340, 6.4). Applying the standard MPS is insufficient here: especially with larger payloads this can lead to annoying, counter-intuitive EMSGSIZE errors. On the other hand, reducing the MPS available for the established phase by the added initial overhead is highly wasteful and inefficient. The solution chosen therefore is a two-phase strategy: If the payload length of the DataAck in PARTOPEN is too large, an Ack is sent to carry the options, and the feature-negotiation list is then flushed. This means that the server gets two Acks for one Response. If both Acks get lost, it is probably better to restart the connection anyway and devising yet another special-case does not seem worth the extra complexity. The result is a higher utilisation of the available packet space for the data transmission phase (established state) of a connection. The patch (over-)estimates the initial overhead to be 32*4 bytes -- commonly seen values were around 90 bytes for initial feature-negotiation options. It uses sizeof(u32) to mean "aligned units of 4 bytes". For consistency, another use of 4-byte alignment is adapted. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-28 01:38:29 +03:00
/* Upper bound for initial feature-negotiation overhead (padded to 32 bits) */
#define DCCP_FEATNEG_OVERHEAD (32 * sizeof(uint32_t))
#define DCCP_TIMEWAIT_LEN (60 * HZ) /* how long to wait to destroy TIME-WAIT
* state, about 60 seconds */
/* RFC 1122, 4.2.3.1 initial RTO value */
#define DCCP_TIMEOUT_INIT ((unsigned)(3 * HZ))
/*
* The maximum back-off value for retransmissions. This is needed for
* - retransmitting client-Requests (sec. 8.1.1),
* - retransmitting Close/CloseReq when closing (sec. 8.3),
* - feature-negotiation retransmission (sec. 6.6.3),
* - Acks in client-PARTOPEN state (sec. 8.1.5).
*/
#define DCCP_RTO_MAX ((unsigned)(64 * HZ))
/*
* RTT sampling: sanity bounds and fallback RTT value from RFC 4340, section 3.4
*/
#define DCCP_SANE_RTT_MIN 100
#define DCCP_FALLBACK_RTT (USEC_PER_SEC / 5)
#define DCCP_SANE_RTT_MAX (3 * USEC_PER_SEC)
/* Maximal interval between probes for local resources. */
#define DCCP_RESOURCE_PROBE_INTERVAL ((unsigned)(HZ / 2U))
/* sysctl variables for DCCP */
extern int sysctl_dccp_request_retries;
extern int sysctl_dccp_retries1;
extern int sysctl_dccp_retries2;
extern int sysctl_dccp_tx_qlen;
extern int sysctl_dccp_sync_ratelimit;
/*
* 48-bit sequence number arithmetic (signed and unsigned)
*/
#define INT48_MIN 0x800000000000LL /* 2^47 */
#define UINT48_MAX 0xFFFFFFFFFFFFLL /* 2^48 - 1 */
#define COMPLEMENT48(x) (0x1000000000000LL - (x)) /* 2^48 - x */
#define TO_SIGNED48(x) (((x) < INT48_MIN)? (x) : -COMPLEMENT48( (x)))
#define TO_UNSIGNED48(x) (((x) >= 0)? (x) : COMPLEMENT48(-(x)))
#define ADD48(a, b) (((a) + (b)) & UINT48_MAX)
#define SUB48(a, b) ADD48((a), COMPLEMENT48(b))
static inline void dccp_set_seqno(u64 *seqno, u64 value)
{
*seqno = value & UINT48_MAX;
}
static inline void dccp_inc_seqno(u64 *seqno)
{
*seqno = ADD48(*seqno, 1);
}
/* signed mod-2^48 distance: pos. if seqno1 < seqno2, neg. if seqno1 > seqno2 */
static inline s64 dccp_delta_seqno(const u64 seqno1, const u64 seqno2)
{
u64 delta = SUB48(seqno2, seqno1);
return TO_SIGNED48(delta);
}
/* is seq1 < seq2 ? */
static inline int before48(const u64 seq1, const u64 seq2)
{
return (s64)((seq2 << 16) - (seq1 << 16)) > 0;
}
/* is seq1 > seq2 ? */
#define after48(seq1, seq2) before48(seq2, seq1)
/* is seq2 <= seq1 <= seq3 ? */
static inline int between48(const u64 seq1, const u64 seq2, const u64 seq3)
{
return (seq3 << 16) - (seq2 << 16) >= (seq1 << 16) - (seq2 << 16);
}
static inline u64 max48(const u64 seq1, const u64 seq2)
{
return after48(seq1, seq2) ? seq1 : seq2;
}
/**
* dccp_loss_free - Evaluates condition for data loss from RFC 4340, 7.7.1
* @s1: start sequence number
* @s2: end sequence number
* @ndp: NDP count on packet with sequence number @s2
* Returns true if the sequence range s1...s2 has no data loss.
*/
static inline bool dccp_loss_free(const u64 s1, const u64 s2, const u64 ndp)
{
s64 delta = dccp_delta_seqno(s1, s2);
WARN_ON(delta < 0);
return (u64)delta <= ndp + 1;
}
enum {
DCCP_MIB_NUM = 0,
DCCP_MIB_ACTIVEOPENS, /* ActiveOpens */
DCCP_MIB_ESTABRESETS, /* EstabResets */
DCCP_MIB_CURRESTAB, /* CurrEstab */
DCCP_MIB_OUTSEGS, /* OutSegs */
DCCP_MIB_OUTRSTS,
DCCP_MIB_ABORTONTIMEOUT,
DCCP_MIB_TIMEOUTS,
DCCP_MIB_ABORTFAILED,
DCCP_MIB_PASSIVEOPENS,
DCCP_MIB_ATTEMPTFAILS,
DCCP_MIB_OUTDATAGRAMS,
DCCP_MIB_INERRS,
DCCP_MIB_OPTMANDATORYERROR,
DCCP_MIB_INVALIDOPT,
__DCCP_MIB_MAX
};
#define DCCP_MIB_MAX __DCCP_MIB_MAX
struct dccp_mib {
unsigned long mibs[DCCP_MIB_MAX];
};
DECLARE_SNMP_STAT(struct dccp_mib, dccp_statistics);
#define DCCP_INC_STATS(field) SNMP_INC_STATS(dccp_statistics, field)
#define DCCP_INC_STATS_BH(field) SNMP_INC_STATS_BH(dccp_statistics, field)
#define DCCP_INC_STATS_USER(field) SNMP_INC_STATS_USER(dccp_statistics, field)
#define DCCP_DEC_STATS(field) SNMP_DEC_STATS(dccp_statistics, field)
#define DCCP_ADD_STATS_BH(field, val) \
SNMP_ADD_STATS_BH(dccp_statistics, field, val)
#define DCCP_ADD_STATS_USER(field, val) \
SNMP_ADD_STATS_USER(dccp_statistics, field, val)
/*
* Checksumming routines
*/
static inline unsigned int dccp_csum_coverage(const struct sk_buff *skb)
{
const struct dccp_hdr* dh = dccp_hdr(skb);
if (dh->dccph_cscov == 0)
return skb->len;
return (dh->dccph_doff + dh->dccph_cscov - 1) * sizeof(u32);
}
static inline void dccp_csum_outgoing(struct sk_buff *skb)
{
unsigned int cov = dccp_csum_coverage(skb);
if (cov >= skb->len)
dccp_hdr(skb)->dccph_cscov = 0;
skb->csum = skb_checksum(skb, 0, (cov > skb->len)? skb->len : cov, 0);
}
extern void dccp_v4_send_check(struct sock *sk, struct sk_buff *skb);
extern int dccp_retransmit_skb(struct sock *sk);
extern void dccp_send_ack(struct sock *sk);
tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[<c05cfaa6>] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [<c05d0d86>] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [<c05d28f8>] tcp_check_req+0x156/0x372 [ 302.910082] [<c04250a3>] printk+0x14/0x18 [ 302.912868] [<c05d0aa1>] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [<c05d26be>] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [<c05bb20f>] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [<c05bb10a>] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [<c059e438>] dev_alloc_skb+0x11/0x25 [ 302.931563] [<c05a211f>] netif_receive_skb+0x2d6/0x33a [ 302.934914] [<d0917941>] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [<c05a3b48>] net_rx_action+0x5c/0xfe [ 302.941792] [<c042856b>] __do_softirq+0x5d/0xc1 [ 302.944788] [<c042850e>] __do_softirq+0x0/0xc1 [ 302.948999] [<c040564b>] do_softirq+0x55/0x88 [ 302.951870] [<c04501b1>] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [<c04284da>] irq_exit+0x35/0x69 [ 302.959081] [<c0405717>] do_IRQ+0x99/0xae [ 302.961896] [<c040422b>] common_interrupt+0x23/0x28 [ 302.966279] [<c040819d>] default_idle+0x2a/0x3d [ 302.969212] [<c0402552>] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07 10:50:04 +04:00
extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
struct request_sock *rsk);
extern void dccp_send_sync(struct sock *sk, const u64 seq,
const enum dccp_pkt_type pkt_type);
extern void dccp_write_xmit(struct sock *sk, int block);
extern void dccp_write_space(struct sock *sk);
extern void dccp_init_xmit_timers(struct sock *sk);
static inline void dccp_clear_xmit_timers(struct sock *sk)
{
inet_csk_clear_xmit_timers(sk);
}
extern unsigned int dccp_sync_mss(struct sock *sk, u32 pmtu);
extern const char *dccp_packet_name(const int type);
extern void dccp_set_state(struct sock *sk, const int state);
extern void dccp_done(struct sock *sk);
extern int dccp_reqsk_init(struct request_sock *rq, struct dccp_sock const *dp,
struct sk_buff const *skb);
extern int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb);
extern struct sock *dccp_create_openreq_child(struct sock *sk,
const struct request_sock *req,
const struct sk_buff *skb);
extern int dccp_v4_do_rcv(struct sock *sk, struct sk_buff *skb);
extern struct sock *dccp_v4_request_recv_sock(struct sock *sk,
struct sk_buff *skb,
struct request_sock *req,
struct dst_entry *dst);
extern struct sock *dccp_check_req(struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
struct request_sock **prev);
extern int dccp_child_process(struct sock *parent, struct sock *child,
struct sk_buff *skb);
extern int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
struct dccp_hdr *dh, unsigned len);
extern int dccp_rcv_established(struct sock *sk, struct sk_buff *skb,
const struct dccp_hdr *dh, const unsigned len);
extern int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized);
extern void dccp_destroy_sock(struct sock *sk);
extern void dccp_close(struct sock *sk, long timeout);
extern struct sk_buff *dccp_make_response(struct sock *sk,
struct dst_entry *dst,
struct request_sock *req);
extern int dccp_connect(struct sock *sk);
extern int dccp_disconnect(struct sock *sk, int flags);
extern int dccp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
extern int dccp_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, unsigned int optlen);
#ifdef CONFIG_COMPAT
extern int compat_dccp_getsockopt(struct sock *sk,
int level, int optname,
char __user *optval, int __user *optlen);
extern int compat_dccp_setsockopt(struct sock *sk,
int level, int optname,
char __user *optval, unsigned int optlen);
#endif
extern int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg);
extern int dccp_sendmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg, size_t size);
extern int dccp_recvmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg, size_t len, int nonblock,
int flags, int *addr_len);
extern void dccp_shutdown(struct sock *sk, int how);
extern int inet_dccp_listen(struct socket *sock, int backlog);
extern unsigned int dccp_poll(struct file *file, struct socket *sock,
poll_table *wait);
extern int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr,
int addr_len);
extern struct sk_buff *dccp_ctl_make_reset(struct sock *sk,
struct sk_buff *skb);
extern int dccp_send_reset(struct sock *sk, enum dccp_reset_codes code);
extern void dccp_send_close(struct sock *sk, const int active);
extern int dccp_invalid_packet(struct sk_buff *skb);
extern u32 dccp_sample_rtt(struct sock *sk, long delta);
static inline int dccp_bad_service_code(const struct sock *sk,
const __be32 service)
{
const struct dccp_sock *dp = dccp_sk(sk);
if (dp->dccps_service == service)
return 0;
return !dccp_list_has_service(dp->dccps_service_list, service);
}
/**
* dccp_skb_cb - DCCP per-packet control information
* @dccpd_type: one of %dccp_pkt_type (or unknown)
* @dccpd_ccval: CCVal field (5.1), see e.g. RFC 4342, 8.1
* @dccpd_reset_code: one of %dccp_reset_codes
* @dccpd_reset_data: Data1..3 fields (depend on @dccpd_reset_code)
* @dccpd_opt_len: total length of all options (5.8) in the packet
* @dccpd_seq: sequence number
* @dccpd_ack_seq: acknowledgment number subheader field value
* This is used for transmission as well as for reception.
*/
struct dccp_skb_cb {
union {
struct inet_skb_parm h4;
#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
struct inet6_skb_parm h6;
#endif
} header;
__u8 dccpd_type:4;
__u8 dccpd_ccval:4;
__u8 dccpd_reset_code,
dccpd_reset_data[3];
__u16 dccpd_opt_len;
__u64 dccpd_seq;
__u64 dccpd_ack_seq;
};
#define DCCP_SKB_CB(__skb) ((struct dccp_skb_cb *)&((__skb)->cb[0]))
/* RFC 4340, sec. 7.7 */
static inline int dccp_non_data_packet(const struct sk_buff *skb)
{
const __u8 type = DCCP_SKB_CB(skb)->dccpd_type;
return type == DCCP_PKT_ACK ||
type == DCCP_PKT_CLOSE ||
type == DCCP_PKT_CLOSEREQ ||
type == DCCP_PKT_RESET ||
type == DCCP_PKT_SYNC ||
type == DCCP_PKT_SYNCACK;
}
/* RFC 4340, sec. 7.7 */
static inline int dccp_data_packet(const struct sk_buff *skb)
{
const __u8 type = DCCP_SKB_CB(skb)->dccpd_type;
return type == DCCP_PKT_DATA ||
type == DCCP_PKT_DATAACK ||
type == DCCP_PKT_REQUEST ||
type == DCCP_PKT_RESPONSE;
}
static inline int dccp_packet_without_ack(const struct sk_buff *skb)
{
const __u8 type = DCCP_SKB_CB(skb)->dccpd_type;
return type == DCCP_PKT_DATA || type == DCCP_PKT_REQUEST;
}
#define DCCP_PKT_WITHOUT_ACK_SEQ (UINT48_MAX << 2)
static inline void dccp_hdr_set_seq(struct dccp_hdr *dh, const u64 gss)
{
struct dccp_hdr_ext *dhx = (struct dccp_hdr_ext *)((void *)dh +
sizeof(*dh));
dh->dccph_seq2 = 0;
dh->dccph_seq = htons((gss >> 32) & 0xfffff);
dhx->dccph_seq_low = htonl(gss & 0xffffffff);
}
static inline void dccp_hdr_set_ack(struct dccp_hdr_ack_bits *dhack,
const u64 gsr)
{
dhack->dccph_reserved1 = 0;
dhack->dccph_ack_nr_high = htons(gsr >> 32);
dhack->dccph_ack_nr_low = htonl(gsr & 0xffffffff);
}
static inline void dccp_update_gsr(struct sock *sk, u64 seq)
{
struct dccp_sock *dp = dccp_sk(sk);
dp->dccps_gsr = seq;
/* Sequence validity window depends on remote Sequence Window (7.5.1) */
dp->dccps_swl = SUB48(ADD48(dp->dccps_gsr, 1), dp->dccps_r_seq_win / 4);
dp->dccps_swh = ADD48(dp->dccps_gsr, (3 * dp->dccps_r_seq_win) / 4);
}
static inline void dccp_update_gss(struct sock *sk, u64 seq)
{
struct dccp_sock *dp = dccp_sk(sk);
dp->dccps_gss = seq;
/* Ack validity window depends on local Sequence Window value (7.5.1) */
dp->dccps_awl = SUB48(ADD48(dp->dccps_gss, 1), dp->dccps_l_seq_win);
dp->dccps_awh = dp->dccps_gss;
}
static inline int dccp_ack_pending(const struct sock *sk)
{
const struct dccp_sock *dp = dccp_sk(sk);
return dp->dccps_timestamp_echo != 0 ||
dccp ccid-2: Phase out the use of boolean Ack Vector sysctl This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, as it now is handled fully dynamically via feature negotiation (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. There was a FIXME to change the error code when dccp_ackvec_add() fails. I removed this after finding out that: * the check whether ackno < ISN is already made earlier, * this Response is likely the 1st packet with an Ackno that the client gets, * so when dccp_ackvec_add() fails, the reason is likely not a packet error. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 12:19:06 +03:00
(dp->dccps_hc_rx_ackvec != NULL &&
dccp_ackvec_pending(dp->dccps_hc_rx_ackvec)) ||
inet_csk_ack_scheduled(sk);
}
dccp: Resolve dependencies of features on choice of CCID This provides a missing link in the code chain, as several features implicitly depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector feature, but also Ack Ratio and Send Loss Event Rate (also taken care of). For Send Ack Vector, the situation is as follows: * since CCID2 mandates the use of Ack Vectors, there is no point in allowing endpoints which use CCID2 to disable Ack Vector features such a connection; * a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4); * for all other CCIDs, the use of (Send) Ack Vector is optional and thus negotiable. However, this implies that the code negotiating the use of Ack Vectors also supports it (i.e. is able to supply and to either parse or ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack Vector support), the use of Ack Vectors is here disabled, with a comment in the source code. An analogous consideration arises for the Send Loss Event Rate feature, since the CCID-3 implementation does not support the loss interval options of RFC 4342. To make such use explicit, corresponding feature-negotiation options are inserted which signal the use of the loss event rate option, as it is used by the CCID3 code. Lastly, the values of the Ack Ratio feature are matched to the choice of CCID. The patch implements this as a function which is called after the user has made all other registrations for changing default values of features. The table is variable-length, the reserved (and hence for feature-negotiation invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0' is used to mark the end of the table. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 11:48:44 +03:00
extern int dccp_feat_finalise_settings(struct dccp_sock *dp);
extern int dccp_feat_server_ccid_dependencies(struct dccp_request_sock *dreq);
extern int dccp_feat_insert_opts(struct dccp_sock*, struct dccp_request_sock*,
struct sk_buff *skb);
extern int dccp_feat_activate_values(struct sock *sk, struct list_head *fn);
extern void dccp_feat_list_purge(struct list_head *fn_list);
extern int dccp_insert_options(struct sock *sk, struct sk_buff *skb);
extern int dccp_insert_options_rsk(struct dccp_request_sock*, struct sk_buff*);
extern int dccp_insert_option_elapsed_time(struct sk_buff *skb, u32 elapsed);
extern u32 dccp_timestamp(void);
extern void dccp_timestamping_init(void);
extern int dccp_insert_option(struct sk_buff *skb, unsigned char option,
const void *value, unsigned char len);
#ifdef CONFIG_SYSCTL
extern int dccp_sysctl_init(void);
extern void dccp_sysctl_exit(void);
#else
static inline int dccp_sysctl_init(void)
{
return 0;
}
static inline void dccp_sysctl_exit(void)
{
}
#endif
#endif /* _DCCP_H */