iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/phy/amlogic/Kconfig

86 lines
2.2 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
# SPDX-License-Identifier: GPL-2.0-only
phy: Group vendor specific phy drivers Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-11 12:17:42 +05:30
#
# Phy drivers for Amlogic platforms
#
config PHY_MESON8B_USB2
phy: amlogic: meson8b-usb2: Add a compatible string for Meson8m2 The 3.10 vendor kernel sets the ACA_ENABLE bit on Meson8b, Meson8m2 and GXBB, but not on Meson8. Add a compatible string for Meson8m2 which also sets that bit. While here, also update the Kconfig text and MODULE_DESCRIPTION. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-7-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13 00:24:24 +02:00
tristate "Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver"
phy: Group vendor specific phy drivers Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-11 12:17:42 +05:30
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
phy: amlogic: meson8b-usb2: Use a MMIO regmap Using a MMIO regmap and switch to regmap_update_bits() to simplify the code in the driver. Also switch to devm_platform_ioremap_resource() instead of open-coding it. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-4-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13 00:24:21 +02:00
select REGMAP_MMIO
phy: Group vendor specific phy drivers Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-11 12:17:42 +05:30
help
phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs Meson8 uses the same USB PHY as found on the Meson8b and GXBB SoCs. Add a new of_device_id to indicate this. Also update the Kconfig option and MODULE_DESCRIPTION accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 18:41:14 +05:30
Enable this to support the Meson USB2 PHYs found in Meson8,
Meson8b and GXBB SoCs.
phy: Group vendor specific phy drivers Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-11 12:17:42 +05:30
If unsure, say N.
phy: meson: add USB2 PHY support for Meson GXL and GXM This adds a new driver for the USB2 PHYs found on Meson GXL and GXM SoCs (both SoCs are using the same USB PHY register layout). The USB2 PHY is a simple PHY which only has a few registers to configure the mode (host/device) and a reset register (to enable/disable the PHY). Unfortunately there are no datasheets available for this PHY. The driver was written by reading the code from Amlogic's GPL kernel sources and by analyzing the registers on an actual GXL and GXM device running the kernel that was shipped on the boards I have. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-20 15:50:41 +02:00
config PHY_MESON_GXL_USB2
tristate "Meson GXL and GXM USB2 PHY drivers"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB2 PHYs found in Meson
GXL and GXM SoCs.
If unsure, say N.
phy: amlogic: add USB3 PHY support for Meson GXL and GXM This adds a new driver for the USB3 PHY found on Meson GXL and GXM SoCs (both SoCs are using the same USB PHY register layout). Unfortunately there is no documentation for this PHY in the public S905X datasheet (published for example by Khadas). What we know so far about this PHY: - even though the Meson GXL and GXM SoCs do not expose an USB3 port (the dwc3 controller only has USB2 ports enabled) we need to initialize the USB3 PHY (specifically USB_R1_U3H_FLADJ_30MHZ_REG_MASK). Without this initialization high-speed USB devices (especially USB hard disks and thumb drives, slower devices like mice do not seem to be affected) - on some boards the USB3 PHY starts in "device mode" - we want to bring it into a known state (by switching it to host mode for now). - it is responsible for the OTG detection and for switching the first USB2 PHY between host and peripheral (aka device) mode. an interrupt can be used to detect changes between host and device mode. There are five inputs to this register area: - the clock and reset line for the USB3 PHY itself - the clock and reset line for the peripheral mode and OTG detection logic (on the GXL and GXM SoCs these are the same clock and reset line as for the USB3 PHY itself, but Amlogic sees this as two different components - even though they share the same register space - so they have to be passed individually to allow specifying different inputs on other SoCs if needed) - the interrupt for the OTG detection logic The whole OTG detection logic is not implemented yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-03 19:47:00 +01:00
phy: amlogic: add Amlogic G12A USB2 PHY Driver This adds support for the USB2 PHY found in the Amlogic G12A SoC Family. It supports Host and/or Peripheral mode, depending on it's position. The first PHY is only used as Host, but the second supports Dual modes defined by the USB Control Glue HW in front of the USB Controllers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-03-25 10:39:40 +01:00
config PHY_MESON_G12A_USB2
tristate "Meson G12A USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB2 PHYs found in Meson
G12A SoCs.
If unsure, say N.
phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver This adds support for the shared USB3 + PCIE PHY found in the Amlogic G12A SoC Family. It supports USB3 Host mode or PCIE 2.0 mode, depending on the layout of the board. Selection is done by the #phy-cells, making the mode static and exclusive. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-03-25 10:39:41 +01:00
config PHY_MESON_G12A_USB3_PCIE
tristate "Meson G12A USB3+PCIE Combo PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB3 + PCIE Combo PHY found
in Meson G12A SoCs.
If unsure, say N.
phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver This adds support for the MIPI analog PHY which is also used for PCIE found in the Amlogic AXG SoC Family. MIPI or PCIE selection is done by the #phy-cells, making the mode static and exclusive. For now only PCIE functionality is supported. This PHY will be used to replace the mipi_enable clock gating logic which was mistakenly added in the clock subsystem. This also activates a non documented band gap bit in those registers that allows reliable PCIE clock signal generation on AXG platforms. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
2020-01-24 00:29:41 +01:00
phy: amlogic: Add Amlogic AXG PCIE PHY Driver This adds support for the PCI PHY found in the Amlogic AXG SoC Family. This will allow to mutualize code in pci-meson.c between AXG and G12A SoC. This PHY also uses and chains an analog PHY, which on AXG platform is needed to have reliable PCIe communication. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-24 00:29:42 +01:00
config PHY_MESON_AXG_PCIE
tristate "Meson AXG PCIE PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson MIPI + PCIE PHY found
in Meson AXG SoCs.
If unsure, say N.
phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver This adds support for the MIPI analog PHY which is also used for PCIE found in the Amlogic AXG SoC Family. MIPI or PCIE selection is done by the #phy-cells, making the mode static and exclusive. For now only PCIE functionality is supported. This PHY will be used to replace the mipi_enable clock gating logic which was mistakenly added in the clock subsystem. This also activates a non documented band gap bit in those registers that allows reliable PCIE clock signal generation on AXG platforms. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
2020-01-24 00:29:41 +01:00
config PHY_MESON_AXG_MIPI_PCIE_ANALOG
tristate "Meson AXG MIPI + PCIE analog PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY, thus we need to have inclusive support for both interfaces at runtime. This fixes the regmap get from parent node, removes cell param to select a mode and implement runtime configuration & power on/off for both functions since they are not exclusive. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20201116101647.73448-4-narmstrong@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16 11:16:47 +01:00
select GENERIC_PHY_MIPI_DPHY
phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver This adds support for the MIPI analog PHY which is also used for PCIE found in the Amlogic AXG SoC Family. MIPI or PCIE selection is done by the #phy-cells, making the mode static and exclusive. For now only PCIE functionality is supported. This PHY will be used to replace the mipi_enable clock gating logic which was mistakenly added in the clock subsystem. This also activates a non documented band gap bit in those registers that allows reliable PCIE clock signal generation on AXG platforms. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
2020-01-24 00:29:41 +01:00
help
Enable this to support the Meson MIPI + PCIE analog PHY
found in Meson AXG SoCs.
If unsure, say N.
phy: amlogic: Add AXG MIPI D-PHY driver The Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSI panels. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20201116101315.71720-3-narmstrong@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16 11:13:15 +01:00
config PHY_MESON_AXG_MIPI_DPHY
tristate "Meson AXG MIPI DPHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
select GENERIC_PHY_MIPI_DPHY
help
Enable this to support the Meson MIPI DPHY found in Meson AXG
SoCs.
If unsure, say N.
Reference in New Issue Copy Permalink