iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
149cb33955
linux/kernel/bpf/bpf_iter.c

593 lines
13 KiB
C
Raw Normal View History

bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 Facebook */
#include <linux/fs.h>
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
#include <linux/anon_inodes.h>
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
#include <linux/filter.h>
#include <linux/bpf.h>
struct bpf_iter_target_info {
struct list_head list;
bpf: net: Refactor bpf_iter target registration Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 21:02:19 +03:00
const struct bpf_iter_reg *reg_info;
bpf: Allow loading of a bpf_iter program A bpf_iter program is a tracing program with attach type BPF_TRACE_ITER. The load attribute attach_btf_id is used by the verifier against a particular kernel function, which represents a target, e.g., __bpf_iter__bpf_map for target bpf_map which is implemented later. The program return value must be 0 or 1 for now. 0 : successful, except potential seq_file buffer overflow which is handled by seq_file reader. 1 : request to restart the same object In the future, other return values may be used for filtering or teminating the iterator. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
2020-05-09 20:59:00 +03:00
u32 btf_id; /* cached value */
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
};
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
struct bpf_iter_link {
struct bpf_link link;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
struct bpf_iter_aux_info aux;
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
struct bpf_iter_target_info *tinfo;
};
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
struct bpf_iter_priv_data {
struct bpf_iter_target_info *tinfo;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
const struct bpf_iter_seq_info *seq_info;
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
struct bpf_prog *prog;
u64 session_id;
u64 seq_num;
bool done_stop;
u8 target_private[] __aligned(8);
};
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
static struct list_head targets = LIST_HEAD_INIT(targets);
static DEFINE_MUTEX(targets_mutex);
bpf: Support bpf tracing/iter programs for BPF_LINK_UPDATE Added BPF_LINK_UPDATE support for tracing/iter programs. This way, a file based bpf iterator, which holds a reference to the link, can have its bpf program updated without creating new files. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175902.2475262-1-yhs@fb.com
2020-05-09 20:59:02 +03:00
/* protect bpf_iter_link changes */
static DEFINE_MUTEX(link_mutex);
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
/* incremented on every opened seq_file */
static atomic64_t session_id;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
static int prepare_seq_file(struct file *file, struct bpf_iter_link *link,
const struct bpf_iter_seq_info *seq_info);
bpf: Create file bpf iterator To produce a file bpf iterator, the fd must be corresponding to a link_fd assocciated with a trace/iter program. When the pinned file is opened, a seq_file will be generated. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 20:59:06 +03:00
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
static void bpf_iter_inc_seq_num(struct seq_file *seq)
{
struct bpf_iter_priv_data *iter_priv;
iter_priv = container_of(seq->private, struct bpf_iter_priv_data,
target_private);
iter_priv->seq_num++;
}
static void bpf_iter_dec_seq_num(struct seq_file *seq)
{
struct bpf_iter_priv_data *iter_priv;
iter_priv = container_of(seq->private, struct bpf_iter_priv_data,
target_private);
iter_priv->seq_num--;
}
static void bpf_iter_done_stop(struct seq_file *seq)
{
struct bpf_iter_priv_data *iter_priv;
iter_priv = container_of(seq->private, struct bpf_iter_priv_data,
target_private);
iter_priv->done_stop = true;
}
bpf: Implement bpf_seq_read() for bpf iterator bpf iterator uses seq_file to provide a lossless way to transfer data to user space. But we want to call bpf program after all objects have been traversed, and bpf program may write additional data to the seq_file buffer. The current seq_read() does not work for this use case. Besides allowing stop() function to write to the buffer, the bpf_seq_read() also fixed the buffer size to one page. If any single call of show() or stop() will emit data more than one page to cause overflow, -E2BIG error code will be returned to user space. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175904.2475468-1-yhs@fb.com
2020-05-09 20:59:04 +03:00
/* bpf_seq_read, a customized and simpler version for bpf iterator.
* no_llseek is assumed for this file.
* The following are differences from seq_read():
* . fixed buffer size (PAGE_SIZE)
* . assuming no_llseek
* . stop() may call bpf program, handling potential overflow there
*/
static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
loff_t *ppos)
{
struct seq_file *seq = file->private_data;
size_t n, offs, copied = 0;
int err = 0;
void *p;
mutex_lock(&seq->lock);
if (!seq->buf) {
seq->size = PAGE_SIZE;
seq->buf = kmalloc(seq->size, GFP_KERNEL);
if (!seq->buf) {
err = -ENOMEM;
goto done;
}
}
if (seq->count) {
n = min(seq->count, size);
err = copy_to_user(buf, seq->buf + seq->from, n);
if (err) {
err = -EFAULT;
goto done;
}
seq->count -= n;
seq->from += n;
copied = n;
goto done;
}
seq->from = 0;
p = seq->op->start(seq, &seq->index);
if (!p)
goto stop;
if (IS_ERR(p)) {
err = PTR_ERR(p);
seq->op->stop(seq, p);
seq->count = 0;
goto done;
}
err = seq->op->show(seq, p);
if (err > 0) {
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
/* object is skipped, decrease seq_num, so next
* valid object can reuse the same seq_num.
*/
bpf_iter_dec_seq_num(seq);
bpf: Implement bpf_seq_read() for bpf iterator bpf iterator uses seq_file to provide a lossless way to transfer data to user space. But we want to call bpf program after all objects have been traversed, and bpf program may write additional data to the seq_file buffer. The current seq_read() does not work for this use case. Besides allowing stop() function to write to the buffer, the bpf_seq_read() also fixed the buffer size to one page. If any single call of show() or stop() will emit data more than one page to cause overflow, -E2BIG error code will be returned to user space. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175904.2475468-1-yhs@fb.com
2020-05-09 20:59:04 +03:00
seq->count = 0;
} else if (err < 0 || seq_has_overflowed(seq)) {
if (!err)
err = -E2BIG;
seq->op->stop(seq, p);
seq->count = 0;
goto done;
}
while (1) {
loff_t pos = seq->index;
offs = seq->count;
p = seq->op->next(seq, p, &seq->index);
if (pos == seq->index) {
pr_info_ratelimited("buggy seq_file .next function %ps "
"did not updated position index\n",
seq->op->next);
seq->index++;
}
if (IS_ERR_OR_NULL(p))
break;
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
/* got a valid next object, increase seq_num */
bpf_iter_inc_seq_num(seq);
bpf: Implement bpf_seq_read() for bpf iterator bpf iterator uses seq_file to provide a lossless way to transfer data to user space. But we want to call bpf program after all objects have been traversed, and bpf program may write additional data to the seq_file buffer. The current seq_read() does not work for this use case. Besides allowing stop() function to write to the buffer, the bpf_seq_read() also fixed the buffer size to one page. If any single call of show() or stop() will emit data more than one page to cause overflow, -E2BIG error code will be returned to user space. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175904.2475468-1-yhs@fb.com
2020-05-09 20:59:04 +03:00
if (seq->count >= size)
break;
err = seq->op->show(seq, p);
if (err > 0) {
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
bpf_iter_dec_seq_num(seq);
bpf: Implement bpf_seq_read() for bpf iterator bpf iterator uses seq_file to provide a lossless way to transfer data to user space. But we want to call bpf program after all objects have been traversed, and bpf program may write additional data to the seq_file buffer. The current seq_read() does not work for this use case. Besides allowing stop() function to write to the buffer, the bpf_seq_read() also fixed the buffer size to one page. If any single call of show() or stop() will emit data more than one page to cause overflow, -E2BIG error code will be returned to user space. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175904.2475468-1-yhs@fb.com
2020-05-09 20:59:04 +03:00
seq->count = offs;
} else if (err < 0 || seq_has_overflowed(seq)) {
seq->count = offs;
if (offs == 0) {
if (!err)
err = -E2BIG;
seq->op->stop(seq, p);
goto done;
}
break;
}
}
stop:
offs = seq->count;
/* bpf program called if !p */
seq->op->stop(seq, p);
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
if (!p) {
if (!seq_has_overflowed(seq)) {
bpf_iter_done_stop(seq);
} else {
seq->count = offs;
if (offs == 0) {
err = -E2BIG;
goto done;
}
bpf: Implement bpf_seq_read() for bpf iterator bpf iterator uses seq_file to provide a lossless way to transfer data to user space. But we want to call bpf program after all objects have been traversed, and bpf program may write additional data to the seq_file buffer. The current seq_read() does not work for this use case. Besides allowing stop() function to write to the buffer, the bpf_seq_read() also fixed the buffer size to one page. If any single call of show() or stop() will emit data more than one page to cause overflow, -E2BIG error code will be returned to user space. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175904.2475468-1-yhs@fb.com
2020-05-09 20:59:04 +03:00
}
}
n = min(seq->count, size);
err = copy_to_user(buf, seq->buf, n);
if (err) {
err = -EFAULT;
goto done;
}
copied = n;
seq->count -= n;
seq->from = n;
done:
if (!copied)
copied = err;
else
*ppos += copied;
mutex_unlock(&seq->lock);
return copied;
}
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
static const struct bpf_iter_seq_info *
__get_seq_info(struct bpf_iter_link *link)
{
const struct bpf_iter_seq_info *seq_info;
if (link->aux.map) {
seq_info = link->aux.map->ops->iter_seq_info;
if (seq_info)
return seq_info;
}
return link->tinfo->reg_info->seq_info;
}
bpf: Create file bpf iterator To produce a file bpf iterator, the fd must be corresponding to a link_fd assocciated with a trace/iter program. When the pinned file is opened, a seq_file will be generated. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 20:59:06 +03:00
static int iter_open(struct inode *inode, struct file *file)
{
struct bpf_iter_link *link = inode->i_private;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
return prepare_seq_file(file, link, __get_seq_info(link));
bpf: Create file bpf iterator To produce a file bpf iterator, the fd must be corresponding to a link_fd assocciated with a trace/iter program. When the pinned file is opened, a seq_file will be generated. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 20:59:06 +03:00
}
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
static int iter_release(struct inode *inode, struct file *file)
{
struct bpf_iter_priv_data *iter_priv;
struct seq_file *seq;
seq = file->private_data;
if (!seq)
return 0;
iter_priv = container_of(seq->private, struct bpf_iter_priv_data,
target_private);
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
if (iter_priv->seq_info->fini_seq_private)
iter_priv->seq_info->fini_seq_private(seq->private);
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
bpf_prog_put(iter_priv->prog);
seq->private = iter_priv;
return seq_release_private(inode, file);
}
bpf: Create file bpf iterator To produce a file bpf iterator, the fd must be corresponding to a link_fd assocciated with a trace/iter program. When the pinned file is opened, a seq_file will be generated. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 20:59:06 +03:00
const struct file_operations bpf_iter_fops = {
.open = iter_open,
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
.llseek = no_llseek,
.read = bpf_seq_read,
.release = iter_release,
};
bpf: net: Refactor bpf_iter target registration Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 21:02:19 +03:00
/* The argument reg_info will be cached in bpf_iter_target_info.
* The common practice is to declare target reg_info as
* a const static variable and passed as an argument to
* bpf_iter_reg_target().
*/
int bpf_iter_reg_target(const struct bpf_iter_reg *reg_info)
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
{
struct bpf_iter_target_info *tinfo;
tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
if (!tinfo)
return -ENOMEM;
bpf: net: Refactor bpf_iter target registration Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 21:02:19 +03:00
tinfo->reg_info = reg_info;
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
INIT_LIST_HEAD(&tinfo->list);
mutex_lock(&targets_mutex);
list_add(&tinfo->list, &targets);
mutex_unlock(&targets_mutex);
return 0;
}
bpf: Change func bpf_iter_unreg_target() signature Change func bpf_iter_unreg_target() parameter from target name to target reg_info, similar to bpf_iter_reg_target(). Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180220.2949737-1-yhs@fb.com
2020-05-13 21:02:20 +03:00
void bpf_iter_unreg_target(const struct bpf_iter_reg *reg_info)
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
{
struct bpf_iter_target_info *tinfo;
bool found = false;
mutex_lock(&targets_mutex);
list_for_each_entry(tinfo, &targets, list) {
bpf: Change func bpf_iter_unreg_target() signature Change func bpf_iter_unreg_target() parameter from target name to target reg_info, similar to bpf_iter_reg_target(). Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180220.2949737-1-yhs@fb.com
2020-05-13 21:02:20 +03:00
if (reg_info == tinfo->reg_info) {
bpf: Implement an interface to register bpf_iter targets The target can call bpf_iter_reg_target() to register itself. The needed information: target: target name seq_ops: the seq_file operations for the target init_seq_private target callback to initialize seq_priv during file open fini_seq_private target callback to clean up seq_priv during file release seq_priv_size: the private_data size needed by the seq_file operations The target name represents a target which provides a seq_ops for iterating objects. The target can provide two callback functions, init_seq_private and fini_seq_private, called during file open/release time. For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net name space needs to be setup properly during file open and released properly during file release. Function bpf_iter_unreg_target() is also implemented to unregister a particular target. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 20:58:59 +03:00
list_del(&tinfo->list);
kfree(tinfo);
found = true;
break;
}
}
mutex_unlock(&targets_mutex);
WARN_ON(found == false);
}
bpf: Allow loading of a bpf_iter program A bpf_iter program is a tracing program with attach type BPF_TRACE_ITER. The load attribute attach_btf_id is used by the verifier against a particular kernel function, which represents a target, e.g., __bpf_iter__bpf_map for target bpf_map which is implemented later. The program return value must be 0 or 1 for now. 0 : successful, except potential seq_file buffer overflow which is handled by seq_file reader. 1 : request to restart the same object In the future, other return values may be used for filtering or teminating the iterator. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
2020-05-09 20:59:00 +03:00
static void cache_btf_id(struct bpf_iter_target_info *tinfo,
struct bpf_prog *prog)
{
tinfo->btf_id = prog->aux->attach_btf_id;
}
bool bpf_iter_prog_supported(struct bpf_prog *prog)
{
const char *attach_fname = prog->aux->attach_func_name;
u32 prog_btf_id = prog->aux->attach_btf_id;
const char *prefix = BPF_ITER_FUNC_PREFIX;
struct bpf_iter_target_info *tinfo;
int prefix_len = strlen(prefix);
bool supported = false;
if (strncmp(attach_fname, prefix, prefix_len))
return false;
mutex_lock(&targets_mutex);
list_for_each_entry(tinfo, &targets, list) {
if (tinfo->btf_id && tinfo->btf_id == prog_btf_id) {
supported = true;
break;
}
bpf: net: Refactor bpf_iter target registration Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 21:02:19 +03:00
if (!strcmp(attach_fname + prefix_len, tinfo->reg_info->target)) {
bpf: Allow loading of a bpf_iter program A bpf_iter program is a tracing program with attach type BPF_TRACE_ITER. The load attribute attach_btf_id is used by the verifier against a particular kernel function, which represents a target, e.g., __bpf_iter__bpf_map for target bpf_map which is implemented later. The program return value must be 0 or 1 for now. 0 : successful, except potential seq_file buffer overflow which is handled by seq_file reader. 1 : request to restart the same object In the future, other return values may be used for filtering or teminating the iterator. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
2020-05-09 20:59:00 +03:00
cache_btf_id(tinfo, prog);
supported = true;
break;
}
}
mutex_unlock(&targets_mutex);
bpf: Enable bpf_iter targets registering ctx argument types Commit b121b341e598 ("bpf: Add PTR_TO_BTF_ID_OR_NULL support") adds a field btf_id_or_null_non0_off to bpf_prog->aux structure to indicate that the first ctx argument is PTR_TO_BTF_ID reg_type and all others are PTR_TO_BTF_ID_OR_NULL. This approach does not really scale if we have other different reg types in the future, e.g., a pointer to a buffer. This patch enables bpf_iter targets registering ctx argument reg types which may be different from the default one. For example, for pointers to structures, the default reg_type is PTR_TO_BTF_ID for tracing program. The target can register a particular pointer type as PTR_TO_BTF_ID_OR_NULL which can be used by the verifier to enforce accesses. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180221.2949882-1-yhs@fb.com
2020-05-13 21:02:21 +03:00
if (supported) {
prog->aux->ctx_arg_info_size = tinfo->reg_info->ctx_arg_info_size;
prog->aux->ctx_arg_info = tinfo->reg_info->ctx_arg_info;
}
bpf: Allow loading of a bpf_iter program A bpf_iter program is a tracing program with attach type BPF_TRACE_ITER. The load attribute attach_btf_id is used by the verifier against a particular kernel function, which represents a target, e.g., __bpf_iter__bpf_map for target bpf_map which is implemented later. The program return value must be 0 or 1 for now. 0 : successful, except potential seq_file buffer overflow which is handled by seq_file reader. 1 : request to restart the same object In the future, other return values may be used for filtering or teminating the iterator. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
2020-05-09 20:59:00 +03:00
return supported;
}
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
static void bpf_iter_link_release(struct bpf_link *link)
{
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
struct bpf_iter_link *iter_link =
container_of(link, struct bpf_iter_link, link);
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
if (iter_link->tinfo->reg_info->detach_target)
iter_link->tinfo->reg_info->detach_target(&iter_link->aux);
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
}
static void bpf_iter_link_dealloc(struct bpf_link *link)
{
struct bpf_iter_link *iter_link =
container_of(link, struct bpf_iter_link, link);
kfree(iter_link);
}
bpf: Support bpf tracing/iter programs for BPF_LINK_UPDATE Added BPF_LINK_UPDATE support for tracing/iter programs. This way, a file based bpf iterator, which holds a reference to the link, can have its bpf program updated without creating new files. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175902.2475262-1-yhs@fb.com
2020-05-09 20:59:02 +03:00
static int bpf_iter_link_replace(struct bpf_link *link,
struct bpf_prog *new_prog,
struct bpf_prog *old_prog)
{
int ret = 0;
mutex_lock(&link_mutex);
if (old_prog && link->prog != old_prog) {
ret = -EPERM;
goto out_unlock;
}
if (link->prog->type != new_prog->type ||
link->prog->expected_attach_type != new_prog->expected_attach_type ||
link->prog->aux->attach_btf_id != new_prog->aux->attach_btf_id) {
ret = -EINVAL;
goto out_unlock;
}
old_prog = xchg(&link->prog, new_prog);
bpf_prog_put(old_prog);
out_unlock:
mutex_unlock(&link_mutex);
return ret;
}
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
static const struct bpf_link_ops bpf_iter_link_lops = {
.release = bpf_iter_link_release,
.dealloc = bpf_iter_link_dealloc,
bpf: Support bpf tracing/iter programs for BPF_LINK_UPDATE Added BPF_LINK_UPDATE support for tracing/iter programs. This way, a file based bpf iterator, which holds a reference to the link, can have its bpf program updated without creating new files. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175902.2475262-1-yhs@fb.com
2020-05-09 20:59:02 +03:00
.update_prog = bpf_iter_link_replace,
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
};
bpf: Create file bpf iterator To produce a file bpf iterator, the fd must be corresponding to a link_fd assocciated with a trace/iter program. When the pinned file is opened, a seq_file will be generated. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 20:59:06 +03:00
bool bpf_link_is_iter(struct bpf_link *link)
{
return link->ops == &bpf_iter_link_lops;
}
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
int bpf_iter_link_attach(const union bpf_attr *attr, struct bpf_prog *prog)
{
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
union bpf_iter_link_info __user *ulinfo;
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
struct bpf_link_primer link_primer;
struct bpf_iter_target_info *tinfo;
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
union bpf_iter_link_info linfo;
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
struct bpf_iter_link *link;
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
u32 prog_btf_id, linfo_len;
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
bool existed = false;
int err;
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
if (attr->link_create.target_fd || attr->link_create.flags)
return -EINVAL;
memset(&linfo, 0, sizeof(union bpf_iter_link_info));
ulinfo = u64_to_user_ptr(attr->link_create.iter_info);
linfo_len = attr->link_create.iter_info_len;
if (!ulinfo ^ !linfo_len)
return -EINVAL;
if (ulinfo) {
err = bpf_check_uarg_tail_zero(ulinfo, sizeof(linfo),
linfo_len);
if (err)
return err;
linfo_len = min_t(u32, linfo_len, sizeof(linfo));
if (copy_from_user(&linfo, ulinfo, linfo_len))
return -EFAULT;
}
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
prog_btf_id = prog->aux->attach_btf_id;
mutex_lock(&targets_mutex);
list_for_each_entry(tinfo, &targets, list) {
if (tinfo->btf_id == prog_btf_id) {
existed = true;
break;
}
}
mutex_unlock(&targets_mutex);
if (!existed)
return -ENOENT;
link = kzalloc(sizeof(*link), GFP_USER | __GFP_NOWARN);
if (!link)
return -ENOMEM;
bpf_link_init(&link->link, BPF_LINK_TYPE_ITER, &bpf_iter_link_lops, prog);
link->tinfo = tinfo;
err = bpf_link_prime(&link->link, &link_primer);
if (err) {
kfree(link);
return err;
}
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
if (tinfo->reg_info->attach_target) {
err = tinfo->reg_info->attach_target(prog, &linfo, &link->aux);
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
if (err) {
bpf: Change uapi for bpf iterator map elements Commit a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
2020-08-05 08:50:56 +03:00
bpf_link_cleanup(&link_primer);
return err;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
}
}
bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE Given a bpf program, the step to create an anonymous bpf iterator is: - create a bpf_iter_link, which combines bpf program and the target. In the future, there could be more information recorded in the link. A link_fd will be returned to the user space. - create an anonymous bpf iterator with the given link_fd. The bpf_iter_link can be pinned to bpffs mount file system to create a file based bpf iterator as well. The benefit to use of bpf_iter_link: - using bpf link simplifies design and implementation as bpf link is used for other tracing bpf programs. - for file based bpf iterator, bpf_iter_link provides a standard way to replace underlying bpf programs. - for both anonymous and free based iterators, bpf link query capability can be leveraged. The patch added support of tracing/iter programs for BPF_LINK_CREATE. A new link type BPF_LINK_TYPE_ITER is added to facilitate link querying. Currently, only prog_id is needed, so there is no additional in-kernel show_fdinfo() and fill_link_info() hook is needed for BPF_LINK_TYPE_ITER link. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 20:59:01 +03:00
return bpf_link_settle(&link_primer);
}
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
static void init_seq_meta(struct bpf_iter_priv_data *priv_data,
struct bpf_iter_target_info *tinfo,
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
const struct bpf_iter_seq_info *seq_info,
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
struct bpf_prog *prog)
{
priv_data->tinfo = tinfo;
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
priv_data->seq_info = seq_info;
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
priv_data->prog = prog;
priv_data->session_id = atomic64_inc_return(&session_id);
priv_data->seq_num = 0;
priv_data->done_stop = false;
}
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
static int prepare_seq_file(struct file *file, struct bpf_iter_link *link,
const struct bpf_iter_seq_info *seq_info)
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
{
struct bpf_iter_priv_data *priv_data;
struct bpf_iter_target_info *tinfo;
struct bpf_prog *prog;
u32 total_priv_dsize;
struct seq_file *seq;
int err = 0;
mutex_lock(&link_mutex);
prog = link->link.prog;
bpf_prog_inc(prog);
mutex_unlock(&link_mutex);
tinfo = link->tinfo;
total_priv_dsize = offsetof(struct bpf_iter_priv_data, target_private) +
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
seq_info->seq_priv_size;
priv_data = __seq_open_private(file, seq_info->seq_ops,
bpf: net: Refactor bpf_iter target registration Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 21:02:19 +03:00
total_priv_dsize);
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
if (!priv_data) {
err = -ENOMEM;
goto release_prog;
}
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
if (seq_info->init_seq_private) {
err = seq_info->init_seq_private(priv_data->target_private, &link->aux);
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
if (err)
goto release_seq_file;
}
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
init_seq_meta(priv_data, tinfo, seq_info, prog);
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
seq = file->private_data;
seq->private = priv_data->target_private;
return 0;
release_seq_file:
seq_release_private(file->f_inode, file);
file->private_data = NULL;
release_prog:
bpf_prog_put(prog);
return err;
}
int bpf_iter_new_fd(struct bpf_link *link)
{
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
struct bpf_iter_link *iter_link;
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
struct file *file;
unsigned int flags;
int err, fd;
if (link->ops != &bpf_iter_link_lops)
return -EINVAL;
flags = O_RDONLY | O_CLOEXEC;
fd = get_unused_fd_flags(flags);
if (fd < 0)
return fd;
file = anon_inode_getfile("bpf_iter", &bpf_iter_fops, NULL, flags);
if (IS_ERR(file)) {
err = PTR_ERR(file);
goto free_fd;
}
bpf: Implement bpf iterator for map elements The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
2020-07-23 21:41:12 +03:00
iter_link = container_of(link, struct bpf_iter_link, link);
err = prepare_seq_file(file, iter_link, __get_seq_info(iter_link));
bpf: Create anonymous bpf iterator A new bpf command BPF_ITER_CREATE is added. The anonymous bpf iterator is seq_file based. The seq_file private data are referenced by targets. The bpf_iter infrastructure allocated additional space at seq_file->private before the space used by targets to store some meta data, e.g., prog: prog to run session_id: an unique id for each opened seq_file seq_num: how many times bpf programs are queried in this session done_stop: an internal state to decide whether bpf program should be called in seq_ops->stop() or not The seq_num will start from 0 for valid objects. The bpf program may see the same seq_num more than once if - seq_file buffer overflow happens and the same object is retried by bpf_seq_read(), or - the bpf program explicitly requests a retry of the same object Since module is not supported for bpf_iter, all target registeration happens at __init time, so there is no need to change bpf_iter_unreg_target() as it is used mostly in error path of the init function at which time no bpf iterators have been created yet. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 20:59:05 +03:00
if (err)
goto free_file;
fd_install(fd, file);
return fd;
free_file:
fput(file);
free_fd:
put_unused_fd(fd);
return err;
}
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
struct bpf_prog *bpf_iter_get_info(struct bpf_iter_meta *meta, bool in_stop)
{
struct bpf_iter_priv_data *iter_priv;
struct seq_file *seq;
void *seq_priv;
seq = meta->seq;
if (seq->file->f_op != &bpf_iter_fops)
return NULL;
seq_priv = seq->private;
iter_priv = container_of(seq_priv, struct bpf_iter_priv_data,
target_private);
if (in_stop && iter_priv->done_stop)
return NULL;
meta->session_id = iter_priv->session_id;
meta->seq_num = iter_priv->seq_num;
return iter_priv->prog;
}
int bpf_iter_run_prog(struct bpf_prog *prog, void *ctx)
{
int ret;
rcu_read_lock();
migrate_disable();
ret = BPF_PROG_RUN(prog, ctx);
migrate_enable();
rcu_read_unlock();
bpf: Add comments to interpret bpf_prog return values Add a short comment in bpf_iter_run_prog() function to explain how bpf_prog return value is converted to seq_ops->show() return value: bpf_prog return seq_ops()->show() return 0 0 1 -EAGAIN When show() return value is -EAGAIN, the current bpf_seq_read() will end. If the current seq_file buffer is empty, -EAGAIN will return to user space. Otherwise, the buffer will be copied to user space. In both cases, the next bpf_seq_read() call will try to show the same object which returned -EAGAIN previously. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180218.2949517-1-yhs@fb.com
2020-05-13 21:02:18 +03:00
/* bpf program can only return 0 or 1:
* 0 : okay
* 1 : retry the same object
* The bpf_iter_run_prog() return value
* will be seq_ops->show() return value.
*/
bpf: Implement common macros/helpers for target iterators Macro DEFINE_BPF_ITER_FUNC is implemented so target can define an init function to capture the BTF type which represents the target. The bpf_iter_meta is a structure holding meta data, common to all targets in the bpf program. Additional marker functions are called before or after bpf_seq_read() show()/next()/stop() callback functions to help calculate precise seq_num and whether call bpf_prog inside stop(). Two functions, bpf_iter_get_info() and bpf_iter_run_prog(), are implemented so target can get needed information from bpf_iter infrastructure and can run the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 20:59:07 +03:00
return ret == 0 ? 0 : -EAGAIN;
}
Reference in New Issue Copy Permalink