2014-02-12 13:57:52 +04:00
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
/*
* Regulator driver for DA9063 PMIC series
*
* Copyright 2012 Dialog Semiconductors Ltd .
* Copyright 2013 Philipp Zabel , Pengutronix
*
* Author : Krystian Garbaciak < krystian . garbaciak @ diasemi . com >
*
* This program is free software ; you can redistribute it and / or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation ; either version 2 of the License , or ( at your
* option ) any later version .
*
*/
# include <linux/kernel.h>
# include <linux/module.h>
# include <linux/init.h>
# include <linux/err.h>
# include <linux/slab.h>
# include <linux/of.h>
# include <linux/platform_device.h>
# include <linux/regmap.h>
# include <linux/regulator/driver.h>
# include <linux/regulator/machine.h>
# include <linux/regulator/of_regulator.h>
# include <linux/mfd/da9063/core.h>
# include <linux/mfd/da9063/pdata.h>
# include <linux/mfd/da9063/registers.h>
/* Definition for registering regmap bit fields using a mask */
# define BFIELD(_reg, _mask) \
REG_FIELD ( _reg , __builtin_ffs ( ( int ) _mask ) - 1 , \
sizeof ( unsigned int ) * 8 - __builtin_clz ( ( _mask ) ) - 1 )
/* Regulator capabilities and registers description */
struct da9063_regulator_info {
struct regulator_desc desc ;
/* Current limiting */
unsigned n_current_limits ;
const int * current_limits ;
/* DA9063 main register fields */
struct reg_field mode ; /* buck mode of operation */
struct reg_field suspend ;
struct reg_field sleep ;
struct reg_field suspend_sleep ;
unsigned int suspend_vsel_reg ;
struct reg_field ilimit ;
/* DA9063 event detection bit */
struct reg_field oc_event ;
} ;
/* Macros for LDO */
# define DA9063_LDO(chip, regl_name, min_mV, step_mV, max_mV) \
. desc . id = chip # # _ID_ # # regl_name , \
. desc . name = __stringify ( chip # # _ # # regl_name ) , \
. desc . ops = & da9063_ldo_ops , \
. desc . min_uV = ( min_mV ) * 1000 , \
. desc . uV_step = ( step_mV ) * 1000 , \
2014-02-12 13:57:52 +04:00
. desc . n_voltages = ( ( ( max_mV ) - ( min_mV ) ) / ( step_mV ) + 1 \
+ ( DA9063_V # # regl_name # # _BIAS ) ) , \
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
. desc . enable_reg = DA9063_REG_ # # regl_name # # _CONT , \
. desc . enable_mask = DA9063_LDO_EN , \
. desc . vsel_reg = DA9063_REG_V # # regl_name # # _A , \
. desc . vsel_mask = DA9063_V # # regl_name # # _MASK , \
. desc . linear_min_sel = DA9063_V # # regl_name # # _BIAS , \
. sleep = BFIELD ( DA9063_REG_V # # regl_name # # _A , DA9063_LDO_SL ) , \
. suspend_sleep = BFIELD ( DA9063_REG_V # # regl_name # # _B , DA9063_LDO_SL ) , \
. suspend_vsel_reg = DA9063_REG_V # # regl_name # # _B
/* Macros for voltage DC/DC converters (BUCKs) */
# define DA9063_BUCK(chip, regl_name, min_mV, step_mV, max_mV, limits_array) \
. desc . id = chip # # _ID_ # # regl_name , \
. desc . name = __stringify ( chip # # _ # # regl_name ) , \
. desc . ops = & da9063_buck_ops , \
. desc . min_uV = ( min_mV ) * 1000 , \
. desc . uV_step = ( step_mV ) * 1000 , \
. desc . n_voltages = ( ( max_mV ) - ( min_mV ) ) / ( step_mV ) + 1 , \
. current_limits = limits_array , \
. n_current_limits = ARRAY_SIZE ( limits_array )
# define DA9063_BUCK_COMMON_FIELDS(regl_name) \
. desc . enable_reg = DA9063_REG_ # # regl_name # # _CONT , \
. desc . enable_mask = DA9063_BUCK_EN , \
. desc . vsel_reg = DA9063_REG_V # # regl_name # # _A , \
. desc . vsel_mask = DA9063_VBUCK_MASK , \
. desc . linear_min_sel = DA9063_VBUCK_BIAS , \
. sleep = BFIELD ( DA9063_REG_V # # regl_name # # _A , DA9063_BUCK_SL ) , \
. suspend_sleep = BFIELD ( DA9063_REG_V # # regl_name # # _B , DA9063_BUCK_SL ) , \
. suspend_vsel_reg = DA9063_REG_V # # regl_name # # _B , \
. mode = BFIELD ( DA9063_REG_ # # regl_name # # _CFG , DA9063_BUCK_MODE_MASK )
/* Defines asignment of regulators info table to chip model */
struct da9063_dev_model {
const struct da9063_regulator_info * regulator_info ;
unsigned n_regulators ;
unsigned dev_model ;
} ;
/* Single regulator settings */
struct da9063_regulator {
struct regulator_desc desc ;
struct regulator_dev * rdev ;
struct da9063 * hw ;
const struct da9063_regulator_info * info ;
struct regmap_field * mode ;
struct regmap_field * suspend ;
struct regmap_field * sleep ;
struct regmap_field * suspend_sleep ;
struct regmap_field * ilimit ;
} ;
/* Encapsulates all information for the regulators driver */
struct da9063_regulators {
unsigned n_regulators ;
/* Array size to be defined during init. Keep at end. */
struct da9063_regulator regulator [ 0 ] ;
} ;
/* BUCK modes for DA9063 */
enum {
BUCK_MODE_MANUAL , /* 0 */
BUCK_MODE_SLEEP , /* 1 */
BUCK_MODE_SYNC , /* 2 */
BUCK_MODE_AUTO /* 3 */
} ;
/* Regulator operations */
/* Current limits array (in uA) for BCORE1, BCORE2, BPRO.
Entry indexes corresponds to register values . */
static const int da9063_buck_a_limits [ ] = {
500000 , 600000 , 700000 , 800000 , 900000 , 1000000 , 1100000 , 1200000 ,
1300000 , 1400000 , 1500000 , 1600000 , 1700000 , 1800000 , 1900000 , 2000000
} ;
/* Current limits array (in uA) for BMEM, BIO, BPERI.
Entry indexes corresponds to register values . */
static const int da9063_buck_b_limits [ ] = {
1500000 , 1600000 , 1700000 , 1800000 , 1900000 , 2000000 , 2100000 , 2200000 ,
2300000 , 2400000 , 2500000 , 2600000 , 2700000 , 2800000 , 2900000 , 3000000
} ;
/* Current limits array (in uA) for merged BCORE1 and BCORE2.
Entry indexes corresponds to register values . */
static const int da9063_bcores_merged_limits [ ] = {
1000000 , 1200000 , 1400000 , 1600000 , 1800000 , 2000000 , 2200000 , 2400000 ,
2600000 , 2800000 , 3000000 , 3200000 , 3400000 , 3600000 , 3800000 , 4000000
} ;
/* Current limits array (in uA) for merged BMEM and BIO.
Entry indexes corresponds to register values . */
static const int da9063_bmem_bio_merged_limits [ ] = {
3000000 , 3200000 , 3400000 , 3600000 , 3800000 , 4000000 , 4200000 , 4400000 ,
4600000 , 4800000 , 5000000 , 5200000 , 5400000 , 5600000 , 5800000 , 6000000
} ;
static int da9063_set_current_limit ( struct regulator_dev * rdev ,
int min_uA , int max_uA )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
const struct da9063_regulator_info * rinfo = regl - > info ;
2013-08-30 16:07:38 +04:00
int n , tval ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
for ( n = 0 ; n < rinfo - > n_current_limits ; n + + ) {
tval = rinfo - > current_limits [ n ] ;
2013-08-30 16:07:38 +04:00
if ( tval > = min_uA & & tval < = max_uA )
return regmap_field_write ( regl - > ilimit , n ) ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
2013-08-30 16:07:38 +04:00
return - EINVAL ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
static int da9063_get_current_limit ( struct regulator_dev * rdev )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
const struct da9063_regulator_info * rinfo = regl - > info ;
unsigned int sel ;
int ret ;
ret = regmap_field_read ( regl - > ilimit , & sel ) ;
if ( ret < 0 )
return ret ;
if ( sel > = rinfo - > n_current_limits )
sel = rinfo - > n_current_limits - 1 ;
return rinfo - > current_limits [ sel ] ;
}
static int da9063_buck_set_mode ( struct regulator_dev * rdev , unsigned mode )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
unsigned val ;
switch ( mode ) {
case REGULATOR_MODE_FAST :
val = BUCK_MODE_SYNC ;
break ;
case REGULATOR_MODE_NORMAL :
val = BUCK_MODE_AUTO ;
break ;
case REGULATOR_MODE_STANDBY :
val = BUCK_MODE_SLEEP ;
break ;
default :
return - EINVAL ;
}
return regmap_field_write ( regl - > mode , val ) ;
}
/*
* Bucks use single mode register field for normal operation
* and suspend state .
* There are 3 modes to map to : FAST , NORMAL , and STANDBY .
*/
static unsigned da9063_buck_get_mode ( struct regulator_dev * rdev )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
struct regmap_field * field ;
unsigned int val , mode = 0 ;
int ret ;
ret = regmap_field_read ( regl - > mode , & val ) ;
if ( ret < 0 )
return ret ;
switch ( val ) {
default :
case BUCK_MODE_MANUAL :
mode = REGULATOR_MODE_FAST | REGULATOR_MODE_STANDBY ;
/* Sleep flag bit decides the mode */
break ;
case BUCK_MODE_SLEEP :
return REGULATOR_MODE_STANDBY ;
case BUCK_MODE_SYNC :
return REGULATOR_MODE_FAST ;
case BUCK_MODE_AUTO :
return REGULATOR_MODE_NORMAL ;
}
/* Detect current regulator state */
ret = regmap_field_read ( regl - > suspend , & val ) ;
if ( ret < 0 )
return 0 ;
/* Read regulator mode from proper register, depending on state */
if ( val )
field = regl - > suspend_sleep ;
else
field = regl - > sleep ;
ret = regmap_field_read ( field , & val ) ;
if ( ret < 0 )
return 0 ;
if ( val )
mode & = REGULATOR_MODE_STANDBY ;
else
mode & = REGULATOR_MODE_NORMAL | REGULATOR_MODE_FAST ;
return mode ;
}
/*
* LDOs use sleep flags - one for normal and one for suspend state .
* There are 2 modes to map to : NORMAL and STANDBY ( sleep ) for each state .
*/
static int da9063_ldo_set_mode ( struct regulator_dev * rdev , unsigned mode )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
unsigned val ;
switch ( mode ) {
case REGULATOR_MODE_NORMAL :
val = 0 ;
break ;
case REGULATOR_MODE_STANDBY :
val = 1 ;
break ;
default :
return - EINVAL ;
}
return regmap_field_write ( regl - > sleep , val ) ;
}
static unsigned da9063_ldo_get_mode ( struct regulator_dev * rdev )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
struct regmap_field * field ;
int ret , val ;
/* Detect current regulator state */
ret = regmap_field_read ( regl - > suspend , & val ) ;
if ( ret < 0 )
return 0 ;
/* Read regulator mode from proper register, depending on state */
if ( val )
field = regl - > suspend_sleep ;
else
field = regl - > sleep ;
ret = regmap_field_read ( field , & val ) ;
if ( ret < 0 )
return 0 ;
if ( val )
return REGULATOR_MODE_STANDBY ;
else
return REGULATOR_MODE_NORMAL ;
}
static int da9063_buck_get_status ( struct regulator_dev * rdev )
{
int ret = regulator_is_enabled_regmap ( rdev ) ;
if ( ret = = 0 ) {
ret = REGULATOR_STATUS_OFF ;
} else if ( ret > 0 ) {
ret = da9063_buck_get_mode ( rdev ) ;
if ( ret > 0 )
ret = regulator_mode_to_status ( ret ) ;
else if ( ret = = 0 )
ret = - EIO ;
}
return ret ;
}
static int da9063_ldo_get_status ( struct regulator_dev * rdev )
{
int ret = regulator_is_enabled_regmap ( rdev ) ;
if ( ret = = 0 ) {
ret = REGULATOR_STATUS_OFF ;
} else if ( ret > 0 ) {
ret = da9063_ldo_get_mode ( rdev ) ;
if ( ret > 0 )
ret = regulator_mode_to_status ( ret ) ;
else if ( ret = = 0 )
ret = - EIO ;
}
return ret ;
}
static int da9063_set_suspend_voltage ( struct regulator_dev * rdev , int uV )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
const struct da9063_regulator_info * rinfo = regl - > info ;
int ret , sel ;
sel = regulator_map_voltage_linear ( rdev , uV , uV ) ;
if ( sel < 0 )
2014-02-18 14:41:05 +04:00
return sel ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
sel < < = ffs ( rdev - > desc - > vsel_mask ) - 1 ;
ret = regmap_update_bits ( regl - > hw - > regmap , rinfo - > suspend_vsel_reg ,
rdev - > desc - > vsel_mask , sel ) ;
return ret ;
}
static int da9063_suspend_enable ( struct regulator_dev * rdev )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
return regmap_field_write ( regl - > suspend , 1 ) ;
}
static int da9063_suspend_disable ( struct regulator_dev * rdev )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
return regmap_field_write ( regl - > suspend , 0 ) ;
}
static int da9063_buck_set_suspend_mode ( struct regulator_dev * rdev , unsigned mode )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
int val ;
switch ( mode ) {
case REGULATOR_MODE_FAST :
val = BUCK_MODE_SYNC ;
break ;
case REGULATOR_MODE_NORMAL :
val = BUCK_MODE_AUTO ;
break ;
case REGULATOR_MODE_STANDBY :
val = BUCK_MODE_SLEEP ;
break ;
default :
return - EINVAL ;
}
return regmap_field_write ( regl - > mode , val ) ;
}
static int da9063_ldo_set_suspend_mode ( struct regulator_dev * rdev , unsigned mode )
{
struct da9063_regulator * regl = rdev_get_drvdata ( rdev ) ;
unsigned val ;
switch ( mode ) {
case REGULATOR_MODE_NORMAL :
val = 0 ;
break ;
case REGULATOR_MODE_STANDBY :
val = 1 ;
break ;
default :
return - EINVAL ;
}
return regmap_field_write ( regl - > suspend_sleep , val ) ;
}
2015-12-19 18:07:09 +03:00
static const struct regulator_ops da9063_buck_ops = {
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
. enable = regulator_enable_regmap ,
. disable = regulator_disable_regmap ,
. is_enabled = regulator_is_enabled_regmap ,
. get_voltage_sel = regulator_get_voltage_sel_regmap ,
. set_voltage_sel = regulator_set_voltage_sel_regmap ,
. list_voltage = regulator_list_voltage_linear ,
. set_current_limit = da9063_set_current_limit ,
. get_current_limit = da9063_get_current_limit ,
. set_mode = da9063_buck_set_mode ,
. get_mode = da9063_buck_get_mode ,
. get_status = da9063_buck_get_status ,
. set_suspend_voltage = da9063_set_suspend_voltage ,
. set_suspend_enable = da9063_suspend_enable ,
. set_suspend_disable = da9063_suspend_disable ,
. set_suspend_mode = da9063_buck_set_suspend_mode ,
} ;
2015-12-19 18:07:09 +03:00
static const struct regulator_ops da9063_ldo_ops = {
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
. enable = regulator_enable_regmap ,
. disable = regulator_disable_regmap ,
. is_enabled = regulator_is_enabled_regmap ,
. get_voltage_sel = regulator_get_voltage_sel_regmap ,
. set_voltage_sel = regulator_set_voltage_sel_regmap ,
. list_voltage = regulator_list_voltage_linear ,
. set_mode = da9063_ldo_set_mode ,
. get_mode = da9063_ldo_get_mode ,
. get_status = da9063_ldo_get_status ,
. set_suspend_voltage = da9063_set_suspend_voltage ,
. set_suspend_enable = da9063_suspend_enable ,
. set_suspend_disable = da9063_suspend_disable ,
. set_suspend_mode = da9063_ldo_set_suspend_mode ,
} ;
/* Info of regulators for DA9063 */
static const struct da9063_regulator_info da9063_regulator_info [ ] = {
{
DA9063_BUCK ( DA9063 , BCORE1 , 300 , 10 , 1570 ,
da9063_buck_a_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BCORE1 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBCORE1_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_C ,
DA9063_BCORE1_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BCORE2 , 300 , 10 , 1570 ,
da9063_buck_a_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BCORE2 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBCORE2_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_C ,
DA9063_BCORE2_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BPRO , 530 , 10 , 1800 ,
da9063_buck_a_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BPRO ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBPRO_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_B ,
DA9063_BPRO_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BMEM , 800 , 20 , 3340 ,
da9063_buck_b_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BMEM ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBMEM_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_A ,
DA9063_BMEM_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BIO , 800 , 20 , 3340 ,
da9063_buck_b_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BIO ) ,
. suspend = BFIELD ( DA9063_REG_DVC_2 , DA9063_VBIO_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_A ,
DA9063_BIO_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BPERI , 800 , 20 , 3340 ,
da9063_buck_b_limits ) ,
DA9063_BUCK_COMMON_FIELDS ( BPERI ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBPERI_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_B ,
DA9063_BPERI_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BCORES_MERGED , 300 , 10 , 1570 ,
da9063_bcores_merged_limits ) ,
/* BCORES_MERGED uses the same register fields as BCORE1 */
DA9063_BUCK_COMMON_FIELDS ( BCORE1 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBCORE1_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_C ,
DA9063_BCORE1_ILIM_MASK ) ,
} ,
{
DA9063_BUCK ( DA9063 , BMEM_BIO_MERGED , 800 , 20 , 3340 ,
da9063_bmem_bio_merged_limits ) ,
/* BMEM_BIO_MERGED uses the same register fields as BMEM */
DA9063_BUCK_COMMON_FIELDS ( BMEM ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VBMEM_SEL ) ,
. ilimit = BFIELD ( DA9063_REG_BUCK_ILIM_A ,
DA9063_BMEM_ILIM_MASK ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO1 , 600 , 20 , 1860 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VLDO1_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO2 , 600 , 20 , 1860 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VLDO2_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO3 , 900 , 20 , 3440 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_1 , DA9063_VLDO3_SEL ) ,
. oc_event = BFIELD ( DA9063_REG_STATUS_D , DA9063_LDO3_LIM ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO4 , 900 , 20 , 3440 ) ,
. suspend = BFIELD ( DA9063_REG_DVC_2 , DA9063_VLDO4_SEL ) ,
. oc_event = BFIELD ( DA9063_REG_STATUS_D , DA9063_LDO4_LIM ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO5 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO5_CONT , DA9063_VLDO5_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO6 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO6_CONT , DA9063_VLDO6_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO7 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO7_CONT , DA9063_VLDO7_SEL ) ,
. oc_event = BFIELD ( DA9063_REG_STATUS_D , DA9063_LDO7_LIM ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO8 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO8_CONT , DA9063_VLDO8_SEL ) ,
. oc_event = BFIELD ( DA9063_REG_STATUS_D , DA9063_LDO8_LIM ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO9 , 950 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO9_CONT , DA9063_VLDO9_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO10 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO10_CONT , DA9063_VLDO10_SEL ) ,
} ,
{
DA9063_LDO ( DA9063 , LDO11 , 900 , 50 , 3600 ) ,
. suspend = BFIELD ( DA9063_REG_LDO11_CONT , DA9063_VLDO11_SEL ) ,
. oc_event = BFIELD ( DA9063_REG_STATUS_D , DA9063_LDO11_LIM ) ,
} ,
} ;
/* Link chip model with regulators info table */
static struct da9063_dev_model regulators_models [ ] = {
{
. regulator_info = da9063_regulator_info ,
. n_regulators = ARRAY_SIZE ( da9063_regulator_info ) ,
. dev_model = PMIC_DA9063 ,
} ,
{ }
} ;
/* Regulator interrupt handlers */
2013-09-01 08:19:51 +04:00
static irqreturn_t da9063_ldo_lim_event ( int irq , void * data )
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
{
struct da9063_regulators * regulators = data ;
struct da9063 * hw = regulators - > regulator [ 0 ] . hw ;
struct da9063_regulator * regl ;
int bits , i , ret ;
ret = regmap_read ( hw - > regmap , DA9063_REG_STATUS_D , & bits ) ;
if ( ret < 0 )
return IRQ_NONE ;
for ( i = regulators - > n_regulators - 1 ; i > = 0 ; i - - ) {
regl = & regulators - > regulator [ i ] ;
if ( regl - > info - > oc_event . reg ! = DA9063_REG_STATUS_D )
continue ;
if ( BIT ( regl - > info - > oc_event . lsb ) & bits )
regulator_notifier_call_chain ( regl - > rdev ,
REGULATOR_EVENT_OVER_CURRENT , NULL ) ;
}
return IRQ_HANDLED ;
}
/*
* Probing and Initialisation functions
*/
static const struct regulator_init_data * da9063_get_regulator_initdata (
const struct da9063_regulators_pdata * regl_pdata , int id )
{
int i ;
for ( i = 0 ; i < regl_pdata - > n_regulators ; i + + ) {
if ( id = = regl_pdata - > regulator_data [ i ] . id )
return regl_pdata - > regulator_data [ i ] . initdata ;
}
return NULL ;
}
# ifdef CONFIG_OF
static struct of_regulator_match da9063_matches [ ] = {
[ DA9063_ID_BCORE1 ] = { . name = " bcore1 " } ,
[ DA9063_ID_BCORE2 ] = { . name = " bcore2 " } ,
[ DA9063_ID_BPRO ] = { . name = " bpro " , } ,
[ DA9063_ID_BMEM ] = { . name = " bmem " , } ,
[ DA9063_ID_BIO ] = { . name = " bio " , } ,
[ DA9063_ID_BPERI ] = { . name = " bperi " , } ,
[ DA9063_ID_BCORES_MERGED ] = { . name = " bcores-merged " } ,
[ DA9063_ID_BMEM_BIO_MERGED ] = { . name = " bmem-bio-merged " , } ,
[ DA9063_ID_LDO1 ] = { . name = " ldo1 " , } ,
[ DA9063_ID_LDO2 ] = { . name = " ldo2 " , } ,
[ DA9063_ID_LDO3 ] = { . name = " ldo3 " , } ,
[ DA9063_ID_LDO4 ] = { . name = " ldo4 " , } ,
[ DA9063_ID_LDO5 ] = { . name = " ldo5 " , } ,
[ DA9063_ID_LDO6 ] = { . name = " ldo6 " , } ,
[ DA9063_ID_LDO7 ] = { . name = " ldo7 " , } ,
[ DA9063_ID_LDO8 ] = { . name = " ldo8 " , } ,
[ DA9063_ID_LDO9 ] = { . name = " ldo9 " , } ,
[ DA9063_ID_LDO10 ] = { . name = " ldo10 " , } ,
[ DA9063_ID_LDO11 ] = { . name = " ldo11 " , } ,
} ;
static struct da9063_regulators_pdata * da9063_parse_regulators_dt (
struct platform_device * pdev ,
struct of_regulator_match * * da9063_reg_matches )
{
struct da9063_regulators_pdata * pdata ;
struct da9063_regulator_data * rdata ;
struct device_node * node ;
int i , n , num ;
2014-02-14 15:49:58 +04:00
node = of_get_child_by_name ( pdev - > dev . parent - > of_node , " regulators " ) ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
if ( ! node ) {
dev_err ( & pdev - > dev , " Regulators device node not found \n " ) ;
return ERR_PTR ( - ENODEV ) ;
}
num = of_regulator_match ( & pdev - > dev , node , da9063_matches ,
ARRAY_SIZE ( da9063_matches ) ) ;
2014-02-17 13:03:31 +04:00
of_node_put ( node ) ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
if ( num < 0 ) {
dev_err ( & pdev - > dev , " Failed to match regulators \n " ) ;
return ERR_PTR ( - EINVAL ) ;
}
pdata = devm_kzalloc ( & pdev - > dev , sizeof ( * pdata ) , GFP_KERNEL ) ;
if ( ! pdata )
return ERR_PTR ( - ENOMEM ) ;
pdata - > regulator_data = devm_kzalloc ( & pdev - > dev ,
num * sizeof ( * pdata - > regulator_data ) ,
GFP_KERNEL ) ;
if ( ! pdata - > regulator_data )
return ERR_PTR ( - ENOMEM ) ;
pdata - > n_regulators = num ;
n = 0 ;
for ( i = 0 ; i < ARRAY_SIZE ( da9063_matches ) ; i + + ) {
if ( ! da9063_matches [ i ] . init_data )
continue ;
rdata = & pdata - > regulator_data [ n ] ;
rdata - > id = i ;
rdata - > initdata = da9063_matches [ i ] . init_data ;
n + + ;
2015-09-11 05:26:57 +03:00
}
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
* da9063_reg_matches = da9063_matches ;
return pdata ;
}
# else
static struct da9063_regulators_pdata * da9063_parse_regulators_dt (
struct platform_device * pdev ,
struct of_regulator_match * * da9063_reg_matches )
{
2014-03-11 15:25:09 +04:00
* da9063_reg_matches = NULL ;
2013-09-09 15:49:26 +04:00
return ERR_PTR ( - ENODEV ) ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
# endif
static int da9063_regulator_probe ( struct platform_device * pdev )
{
struct da9063 * da9063 = dev_get_drvdata ( pdev - > dev . parent ) ;
struct da9063_pdata * da9063_pdata = dev_get_platdata ( da9063 - > dev ) ;
2013-09-09 15:49:27 +04:00
struct of_regulator_match * da9063_reg_matches = NULL ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
struct da9063_regulators_pdata * regl_pdata ;
const struct da9063_dev_model * model ;
struct da9063_regulators * regulators ;
struct da9063_regulator * regl ;
struct regulator_config config ;
bool bcores_merged , bmem_bio_merged ;
int id , irq , n , n_regulators , ret , val ;
size_t size ;
regl_pdata = da9063_pdata ? da9063_pdata - > regulators_pdata : NULL ;
if ( ! regl_pdata )
regl_pdata = da9063_parse_regulators_dt ( pdev ,
& da9063_reg_matches ) ;
if ( IS_ERR ( regl_pdata ) | | regl_pdata - > n_regulators = = 0 ) {
dev_err ( & pdev - > dev ,
" No regulators defined for the platform \n " ) ;
return PTR_ERR ( regl_pdata ) ;
}
/* Find regulators set for particular device model */
for ( model = regulators_models ; model - > regulator_info ; model + + ) {
if ( model - > dev_model = = da9063 - > model )
break ;
}
if ( ! model - > regulator_info ) {
dev_err ( & pdev - > dev , " Chip model not recognised (%u) \n " ,
da9063 - > model ) ;
return - ENODEV ;
}
ret = regmap_read ( da9063 - > regmap , DA9063_REG_CONFIG_H , & val ) ;
if ( ret < 0 ) {
dev_err ( & pdev - > dev ,
" Error while reading BUCKs configuration \n " ) ;
2014-02-18 14:41:05 +04:00
return ret ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
bcores_merged = val & DA9063_BCORE_MERGE ;
bmem_bio_merged = val & DA9063_BUCK_MERGE ;
n_regulators = model - > n_regulators ;
if ( bcores_merged )
n_regulators - = 2 ; /* remove BCORE1, BCORE2 */
else
n_regulators - - ; /* remove BCORES_MERGED */
if ( bmem_bio_merged )
n_regulators - = 2 ; /* remove BMEM, BIO */
else
n_regulators - - ; /* remove BMEM_BIO_MERGED */
/* Allocate memory required by usable regulators */
size = sizeof ( struct da9063_regulators ) +
n_regulators * sizeof ( struct da9063_regulator ) ;
regulators = devm_kzalloc ( & pdev - > dev , size , GFP_KERNEL ) ;
2014-02-20 12:53:01 +04:00
if ( ! regulators )
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
return - ENOMEM ;
regulators - > n_regulators = n_regulators ;
platform_set_drvdata ( pdev , regulators ) ;
/* Register all regulators declared in platform information */
n = 0 ;
id = 0 ;
while ( n < regulators - > n_regulators ) {
/* Skip regulator IDs depending on merge mode configuration */
switch ( id ) {
case DA9063_ID_BCORE1 :
case DA9063_ID_BCORE2 :
if ( bcores_merged ) {
id + + ;
continue ;
}
break ;
case DA9063_ID_BMEM :
case DA9063_ID_BIO :
if ( bmem_bio_merged ) {
id + + ;
continue ;
}
break ;
case DA9063_ID_BCORES_MERGED :
if ( ! bcores_merged ) {
id + + ;
continue ;
}
break ;
case DA9063_ID_BMEM_BIO_MERGED :
if ( ! bmem_bio_merged ) {
id + + ;
continue ;
}
break ;
}
/* Initialise regulator structure */
regl = & regulators - > regulator [ n ] ;
regl - > hw = da9063 ;
regl - > info = & model - > regulator_info [ id ] ;
regl - > desc = regl - > info - > desc ;
regl - > desc . type = REGULATOR_VOLTAGE ;
regl - > desc . owner = THIS_MODULE ;
if ( regl - > info - > mode . reg )
regl - > mode = devm_regmap_field_alloc ( & pdev - > dev ,
da9063 - > regmap , regl - > info - > mode ) ;
if ( regl - > info - > suspend . reg )
regl - > suspend = devm_regmap_field_alloc ( & pdev - > dev ,
da9063 - > regmap , regl - > info - > suspend ) ;
if ( regl - > info - > sleep . reg )
regl - > sleep = devm_regmap_field_alloc ( & pdev - > dev ,
da9063 - > regmap , regl - > info - > sleep ) ;
if ( regl - > info - > suspend_sleep . reg )
regl - > suspend_sleep = devm_regmap_field_alloc ( & pdev - > dev ,
da9063 - > regmap , regl - > info - > suspend_sleep ) ;
if ( regl - > info - > ilimit . reg )
regl - > ilimit = devm_regmap_field_alloc ( & pdev - > dev ,
da9063 - > regmap , regl - > info - > ilimit ) ;
/* Register regulator */
memset ( & config , 0 , sizeof ( config ) ) ;
config . dev = & pdev - > dev ;
config . init_data = da9063_get_regulator_initdata ( regl_pdata , id ) ;
config . driver_data = regl ;
if ( da9063_reg_matches )
config . of_node = da9063_reg_matches [ id ] . of_node ;
config . regmap = da9063 - > regmap ;
2013-09-30 04:53:09 +04:00
regl - > rdev = devm_regulator_register ( & pdev - > dev , & regl - > desc ,
& config ) ;
2013-08-30 16:08:42 +04:00
if ( IS_ERR ( regl - > rdev ) ) {
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
dev_err ( & pdev - > dev ,
" Failed to register %s regulator \n " ,
regl - > desc . name ) ;
2013-09-30 04:53:09 +04:00
return PTR_ERR ( regl - > rdev ) ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
id + + ;
n + + ;
}
/* LDOs overcurrent event support */
irq = platform_get_irq_byname ( pdev , " LDO_LIM " ) ;
if ( irq < 0 ) {
dev_err ( & pdev - > dev , " Failed to get IRQ. \n " ) ;
2013-09-30 04:53:09 +04:00
return irq ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
2015-05-31 07:27:38 +03:00
ret = devm_request_threaded_irq ( & pdev - > dev , irq ,
2014-11-21 18:29:08 +03:00
NULL , da9063_ldo_lim_event ,
IRQF_TRIGGER_LOW | IRQF_ONESHOT ,
" LDO_LIM " , regulators ) ;
if ( ret ) {
2015-05-31 07:27:38 +03:00
dev_err ( & pdev - > dev , " Failed to request LDO_LIM IRQ. \n " ) ;
return ret ;
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 21:00:45 +04:00
}
return 0 ;
}
static struct platform_driver da9063_regulator_driver = {
. driver = {
. name = DA9063_DRVNAME_REGULATORS ,
} ,
. probe = da9063_regulator_probe ,
} ;
static int __init da9063_regulator_init ( void )
{
return platform_driver_register ( & da9063_regulator_driver ) ;
}
subsys_initcall ( da9063_regulator_init ) ;
static void __exit da9063_regulator_cleanup ( void )
{
platform_driver_unregister ( & da9063_regulator_driver ) ;
}
module_exit ( da9063_regulator_cleanup ) ;
/* Module information */
MODULE_AUTHOR ( " Krystian Garbaciak <krystian.garbaciak@diasemi.com> " ) ;
MODULE_DESCRIPTION ( " DA9063 regulators driver " ) ;
MODULE_LICENSE ( " GPL " ) ;
2016-05-10 21:57:57 +03:00
MODULE_ALIAS ( " platform: " DA9063_DRVNAME_REGULATORS ) ;