linux/drivers/net/dsa/bcm_sf2.c

/*
 * Broadcom Starfighter 2 DSA switch driver
 *
 * Copyright (C) 2014, Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/mii.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <net/dsa.h>
#include <linux/ethtool.h>
#include <linux/if_bridge.h>
#include <linux/brcmphy.h>
#include <linux/etherdevice.h>
#include <net/switchdev.h>

#include "bcm_sf2.h"
#include "bcm_sf2_regs.h"

/* String, offset, and register size in bytes if different from 4 bytes */
static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = {
	{ "TxOctets",		0x000, 8	},
	{ "TxDropPkts",		0x020		},
	{ "TxQPKTQ0",		0x030		},
	{ "TxBroadcastPkts",	0x040		},
	{ "TxMulticastPkts",	0x050		},
	{ "TxUnicastPKts",	0x060		},
	{ "TxCollisions",	0x070		},
	{ "TxSingleCollision",	0x080		},
	{ "TxMultipleCollision", 0x090		},
	{ "TxDeferredCollision", 0x0a0		},
	{ "TxLateCollision",	0x0b0		},
	{ "TxExcessiveCollision", 0x0c0		},
	{ "TxFrameInDisc",	0x0d0		},
	{ "TxPausePkts",	0x0e0		},
	{ "TxQPKTQ1",		0x0f0		},
	{ "TxQPKTQ2",		0x100		},
	{ "TxQPKTQ3",		0x110		},
	{ "TxQPKTQ4",		0x120		},
	{ "TxQPKTQ5",		0x130		},
	{ "RxOctets",		0x140, 8	},
	{ "RxUndersizePkts",	0x160		},
	{ "RxPausePkts",	0x170		},
	{ "RxPkts64Octets",	0x180		},
	{ "RxPkts65to127Octets", 0x190		},
	{ "RxPkts128to255Octets", 0x1a0		},
	{ "RxPkts256to511Octets", 0x1b0		},
	{ "RxPkts512to1023Octets", 0x1c0	},
	{ "RxPkts1024toMaxPktsOctets", 0x1d0	},
	{ "RxOversizePkts",	0x1e0		},
	{ "RxJabbers",		0x1f0		},
	{ "RxAlignmentErrors",	0x200		},
	{ "RxFCSErrors",	0x210		},
	{ "RxGoodOctets",	0x220, 8	},
	{ "RxDropPkts",		0x240		},
	{ "RxUnicastPkts",	0x250		},
	{ "RxMulticastPkts",	0x260		},
	{ "RxBroadcastPkts",	0x270		},
	{ "RxSAChanges",	0x280		},
	{ "RxFragments",	0x290		},
	{ "RxJumboPkt",		0x2a0		},
	{ "RxSymblErr",		0x2b0		},
	{ "InRangeErrCount",	0x2c0		},
	{ "OutRangeErrCount",	0x2d0		},
	{ "EEELpiEvent",	0x2e0		},
	{ "EEELpiDuration",	0x2f0		},
	{ "RxDiscard",		0x300, 8	},
	{ "TxQPKTQ6",		0x320		},
	{ "TxQPKTQ7",		0x330		},
	{ "TxPkts64Octets",	0x340		},
	{ "TxPkts65to127Octets", 0x350		},
	{ "TxPkts128to255Octets", 0x360		},
	{ "TxPkts256to511Ocets", 0x370		},
	{ "TxPkts512to1023Ocets", 0x380		},
	{ "TxPkts1024toMaxPktOcets", 0x390	},
};

#define BCM_SF2_STATS_SIZE	ARRAY_SIZE(bcm_sf2_mib)

static void bcm_sf2_sw_get_strings(struct dsa_switch *ds,
				   int port, uint8_t *data)
{
	unsigned int i;

	for (i = 0; i < BCM_SF2_STATS_SIZE; i++)
		memcpy(data + i * ETH_GSTRING_LEN,
		       bcm_sf2_mib[i].string, ETH_GSTRING_LEN);
}

static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds,
					 int port, uint64_t *data)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	const struct bcm_sf2_hw_stats *s;
	unsigned int i;
	u64 val = 0;
	u32 offset;

	mutex_lock(&priv->stats_mutex);

	/* Now fetch the per-port counters */
	for (i = 0; i < BCM_SF2_STATS_SIZE; i++) {
		s = &bcm_sf2_mib[i];

		/* Do a latched 64-bit read if needed */
		offset = s->reg + CORE_P_MIB_OFFSET(port);
		if (s->sizeof_stat == 8)
			val = core_readq(priv, offset);
		else
			val = core_readl(priv, offset);

		data[i] = (u64)val;
	}

	mutex_unlock(&priv->stats_mutex);
}

static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
{
	return BCM_SF2_STATS_SIZE;
}

static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	unsigned int i;
	u32 reg;

	/* Enable the IMP Port to be in the same VLAN as the other ports
	 * on a per-port basis such that we only have Port i and IMP in
	 * the same VLAN.
	 */
	for (i = 0; i < priv->hw_params.num_ports; i++) {
		if (!((1 << i) & ds->enabled_port_mask))
			continue;

		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
		reg |= (1 << cpu_port);
		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
	}
}

static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 reg, val;

	/* Enable the port memories */
	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
	reg &= ~P_TXQ_PSM_VDD(port);
	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);

	/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
	reg = core_readl(priv, CORE_IMP_CTL);
	reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
	reg &= ~(RX_DIS | TX_DIS);
	core_writel(priv, reg, CORE_IMP_CTL);

	/* Enable forwarding */
	core_writel(priv, SW_FWDG_EN, CORE_SWMODE);

	/* Enable IMP port in dumb mode */
	reg = core_readl(priv, CORE_SWITCH_CTRL);
	reg |= MII_DUMB_FWDG_EN;
	core_writel(priv, reg, CORE_SWITCH_CTRL);

	/* Resolve which bit controls the Broadcom tag */
	switch (port) {
	case 8:
		val = BRCM_HDR_EN_P8;
		break;
	case 7:
		val = BRCM_HDR_EN_P7;
		break;
	case 5:
		val = BRCM_HDR_EN_P5;
		break;
	default:
		val = 0;
		break;
	}

	/* Enable Broadcom tags for IMP port */
	reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
	reg |= val;
	core_writel(priv, reg, CORE_BRCM_HDR_CTRL);

	/* Enable reception Broadcom tag for CPU TX (switch RX) to
	 * allow us to tag outgoing frames
	 */
	reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
	reg &= ~(1 << port);
	core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);

	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
	 * allow delivering frames to the per-port net_devices
	 */
	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
	reg &= ~(1 << port);
	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);

	/* Force link status for IMP port */
	reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
	reg |= (MII_SW_OR | LINK_STS);
	core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
}

static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 reg;

	reg = core_readl(priv, CORE_EEE_EN_CTRL);
	if (enable)
		reg |= 1 << port;
	else
		reg &= ~(1 << port);
	core_writel(priv, reg, CORE_EEE_EN_CTRL);
}

static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 reg;

	reg = reg_readl(priv, REG_SPHY_CNTRL);
	if (enable) {
		reg |= PHY_RESET;
		reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS | CK25_DIS);
		reg_writel(priv, reg, REG_SPHY_CNTRL);
		udelay(21);
		reg = reg_readl(priv, REG_SPHY_CNTRL);
		reg &= ~PHY_RESET;
	} else {
		reg |= EXT_PWR_DOWN | IDDQ_BIAS | PHY_RESET;
		reg_writel(priv, reg, REG_SPHY_CNTRL);
		mdelay(1);
		reg |= CK25_DIS;
	}
	reg_writel(priv, reg, REG_SPHY_CNTRL);

	/* Use PHY-driven LED signaling */
	if (!enable) {
		reg = reg_readl(priv, REG_LED_CNTRL(0));
		reg |= SPDLNK_SRC_SEL;
		reg_writel(priv, reg, REG_LED_CNTRL(0));
	}
}

static inline void bcm_sf2_port_intr_enable(struct bcm_sf2_priv *priv,
					    int port)
{
	unsigned int off;

	switch (port) {
	case 7:
		off = P7_IRQ_OFF;
		break;
	case 0:
		/* Port 0 interrupts are located on the first bank */
		intrl2_0_mask_clear(priv, P_IRQ_MASK(P0_IRQ_OFF));
		return;
	default:
		off = P_IRQ_OFF(port);
		break;
	}

	intrl2_1_mask_clear(priv, P_IRQ_MASK(off));
}

static inline void bcm_sf2_port_intr_disable(struct bcm_sf2_priv *priv,
					     int port)
{
	unsigned int off;

	switch (port) {
	case 7:
		off = P7_IRQ_OFF;
		break;
	case 0:
		/* Port 0 interrupts are located on the first bank */
		intrl2_0_mask_set(priv, P_IRQ_MASK(P0_IRQ_OFF));
		intrl2_0_writel(priv, P_IRQ_MASK(P0_IRQ_OFF), INTRL2_CPU_CLEAR);
		return;
	default:
		off = P_IRQ_OFF(port);
		break;
	}

	intrl2_1_mask_set(priv, P_IRQ_MASK(off));
	intrl2_1_writel(priv, P_IRQ_MASK(off), INTRL2_CPU_CLEAR);
}

static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
			      struct phy_device *phy)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	s8 cpu_port = ds->dst[ds->index].cpu_port;
	u32 reg;

	/* Clear the memory power down */
	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
	reg &= ~P_TXQ_PSM_VDD(port);
	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);

	/* Clear the Rx and Tx disable bits and set to no spanning tree */
	core_writel(priv, 0, CORE_G_PCTL_PORT(port));

	/* Re-enable the GPHY and re-apply workarounds */
	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
		bcm_sf2_gphy_enable_set(ds, true);
		if (phy) {
			/* if phy_stop() has been called before, phy
			 * will be in halted state, and phy_start()
			 * will call resume.
			 *
			 * the resume path does not configure back
			 * autoneg settings, and since we hard reset
			 * the phy manually here, we need to reset the
			 * state machine also.
			 */
			phy->state = PHY_READY;
			phy_init_hw(phy);
		}
	}

	/* Enable MoCA port interrupts to get notified */
	if (port == priv->moca_port)
		bcm_sf2_port_intr_enable(priv, port);

	/* Set this port, and only this one to be in the default VLAN,
	 * if member of a bridge, restore its membership prior to
	 * bringing down this port.
	 */
	reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
	reg &= ~PORT_VLAN_CTRL_MASK;
	reg |= (1 << port);
	reg |= priv->port_sts[port].vlan_ctl_mask;
	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));

	bcm_sf2_imp_vlan_setup(ds, cpu_port);

	/* If EEE was enabled, restore it */
	if (priv->port_sts[port].eee.eee_enabled)
		bcm_sf2_eee_enable_set(ds, port, true);

	return 0;
}

static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
				 struct phy_device *phy)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 off, reg;

	if (priv->wol_ports_mask & (1 << port))
		return;

	if (port == priv->moca_port)
		bcm_sf2_port_intr_disable(priv, port);

	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1)
		bcm_sf2_gphy_enable_set(ds, false);

	if (dsa_is_cpu_port(ds, port))
		off = CORE_IMP_CTL;
	else
		off = CORE_G_PCTL_PORT(port);

	reg = core_readl(priv, off);
	reg |= RX_DIS | TX_DIS;
	core_writel(priv, reg, off);

	/* Power down the port memory */
	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
	reg |= P_TXQ_PSM_VDD(port);
	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
}

/* Returns 0 if EEE was not enabled, or 1 otherwise
 */
static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
			    struct phy_device *phy)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct ethtool_eee *p = &priv->port_sts[port].eee;
	int ret;

	p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);

	ret = phy_init_eee(phy, 0);
	if (ret)
		return 0;

	bcm_sf2_eee_enable_set(ds, port, true);

	return 1;
}

static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
			      struct ethtool_eee *e)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct ethtool_eee *p = &priv->port_sts[port].eee;
	u32 reg;

	reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
	e->eee_enabled = p->eee_enabled;
	e->eee_active = !!(reg & (1 << port));

	return 0;
}

static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
			      struct phy_device *phydev,
			      struct ethtool_eee *e)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct ethtool_eee *p = &priv->port_sts[port].eee;

	p->eee_enabled = e->eee_enabled;

	if (!p->eee_enabled) {
		bcm_sf2_eee_enable_set(ds, port, false);
	} else {
		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
		if (!p->eee_enabled)
			return -EOPNOTSUPP;
	}

	return 0;
}

static int bcm_sf2_fast_age_op(struct bcm_sf2_priv *priv)
{
	unsigned int timeout = 1000;
	u32 reg;

	reg = core_readl(priv, CORE_FAST_AGE_CTRL);
	reg |= EN_AGE_PORT | EN_AGE_VLAN | EN_AGE_DYNAMIC | FAST_AGE_STR_DONE;
	core_writel(priv, reg, CORE_FAST_AGE_CTRL);

	do {
		reg = core_readl(priv, CORE_FAST_AGE_CTRL);
		if (!(reg & FAST_AGE_STR_DONE))
			break;

		cpu_relax();
	} while (timeout--);

	if (!timeout)
		return -ETIMEDOUT;

	core_writel(priv, 0, CORE_FAST_AGE_CTRL);

	return 0;
}

/* Fast-ageing of ARL entries for a given port, equivalent to an ARL
 * flush for that port.
 */
static int bcm_sf2_sw_fast_age_port(struct dsa_switch *ds, int port)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	core_writel(priv, port, CORE_FAST_AGE_PORT);

	return bcm_sf2_fast_age_op(priv);
}

static int bcm_sf2_sw_fast_age_vlan(struct bcm_sf2_priv *priv, u16 vid)
{
	core_writel(priv, vid, CORE_FAST_AGE_VID);

	return bcm_sf2_fast_age_op(priv);
}

static int bcm_sf2_vlan_op_wait(struct bcm_sf2_priv *priv)
{
	unsigned int timeout = 10;
	u32 reg;

	do {
		reg = core_readl(priv, CORE_ARLA_VTBL_RWCTRL);
		if (!(reg & ARLA_VTBL_STDN))
			return 0;

		usleep_range(1000, 2000);
	} while (timeout--);

	return -ETIMEDOUT;
}

static int bcm_sf2_vlan_op(struct bcm_sf2_priv *priv, u8 op)
{
	core_writel(priv, ARLA_VTBL_STDN | op, CORE_ARLA_VTBL_RWCTRL);

	return bcm_sf2_vlan_op_wait(priv);
}

static void bcm_sf2_set_vlan_entry(struct bcm_sf2_priv *priv, u16 vid,
				   struct bcm_sf2_vlan *vlan)
{
	int ret;

	core_writel(priv, vid & VTBL_ADDR_INDEX_MASK, CORE_ARLA_VTBL_ADDR);
	core_writel(priv, vlan->untag << UNTAG_MAP_SHIFT | vlan->members,
		    CORE_ARLA_VTBL_ENTRY);

	ret = bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_WRITE);
	if (ret)
		pr_err("failed to write VLAN entry\n");
}

static int bcm_sf2_get_vlan_entry(struct bcm_sf2_priv *priv, u16 vid,
				  struct bcm_sf2_vlan *vlan)
{
	u32 entry;
	int ret;

	core_writel(priv, vid & VTBL_ADDR_INDEX_MASK, CORE_ARLA_VTBL_ADDR);

	ret = bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_READ);
	if (ret)
		return ret;

	entry = core_readl(priv, CORE_ARLA_VTBL_ENTRY);
	vlan->members = entry & FWD_MAP_MASK;
	vlan->untag = (entry >> UNTAG_MAP_SHIFT) & UNTAG_MAP_MASK;

	return 0;
}

static int bcm_sf2_sw_br_join(struct dsa_switch *ds, int port,
			      struct net_device *bridge)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	s8 cpu_port = ds->dst->cpu_port;
	unsigned int i;
	u32 reg, p_ctl;

	/* Make this port leave the all VLANs join since we will have proper
	 * VLAN entries from now on
	 */
	reg = core_readl(priv, CORE_JOIN_ALL_VLAN_EN);
	reg &= ~BIT(port);
	if ((reg & BIT(cpu_port)) == BIT(cpu_port))
		reg &= ~BIT(cpu_port);
	core_writel(priv, reg, CORE_JOIN_ALL_VLAN_EN);

	priv->port_sts[port].bridge_dev = bridge;
	p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));

	for (i = 0; i < priv->hw_params.num_ports; i++) {
		if (priv->port_sts[i].bridge_dev != bridge)
			continue;

		/* Add this local port to the remote port VLAN control
		 * membership and update the remote port bitmask
		 */
		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
		reg |= 1 << port;
		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
		priv->port_sts[i].vlan_ctl_mask = reg;

		p_ctl |= 1 << i;
	}

	/* Configure the local port VLAN control membership to include
	 * remote ports and update the local port bitmask
	 */
	core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
	priv->port_sts[port].vlan_ctl_mask = p_ctl;

	return 0;
}

static void bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct net_device *bridge = priv->port_sts[port].bridge_dev;
	s8 cpu_port = ds->dst->cpu_port;
	unsigned int i;
	u32 reg, p_ctl;

	p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));

	for (i = 0; i < priv->hw_params.num_ports; i++) {
		/* Don't touch the remaining ports */
		if (priv->port_sts[i].bridge_dev != bridge)
			continue;

		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
		reg &= ~(1 << port);
		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
		priv->port_sts[port].vlan_ctl_mask = reg;

		/* Prevent self removal to preserve isolation */
		if (port != i)
			p_ctl &= ~(1 << i);
	}

	core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
	priv->port_sts[port].vlan_ctl_mask = p_ctl;
	priv->port_sts[port].bridge_dev = NULL;

	/* Make this port join all VLANs without VLAN entries */
	reg = core_readl(priv, CORE_JOIN_ALL_VLAN_EN);
	reg |= BIT(port);
	if (!(reg & BIT(cpu_port)))
		reg |= BIT(cpu_port);
	core_writel(priv, reg, CORE_JOIN_ALL_VLAN_EN);
}

static void bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
					u8 state)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u8 hw_state, cur_hw_state;
	u32 reg;

	reg = core_readl(priv, CORE_G_PCTL_PORT(port));
	cur_hw_state = reg & (G_MISTP_STATE_MASK << G_MISTP_STATE_SHIFT);

	switch (state) {
	case BR_STATE_DISABLED:
		hw_state = G_MISTP_DIS_STATE;
		break;
	case BR_STATE_LISTENING:
		hw_state = G_MISTP_LISTEN_STATE;
		break;
	case BR_STATE_LEARNING:
		hw_state = G_MISTP_LEARN_STATE;
		break;
	case BR_STATE_FORWARDING:
		hw_state = G_MISTP_FWD_STATE;
		break;
	case BR_STATE_BLOCKING:
		hw_state = G_MISTP_BLOCK_STATE;
		break;
	default:
		pr_err("%s: invalid STP state: %d\n", __func__, state);
		return;
	}

	/* Fast-age ARL entries if we are moving a port from Learning or
	 * Forwarding (cur_hw_state) state to Disabled, Blocking or Listening
	 * state (hw_state)
	 */
	if (cur_hw_state != hw_state) {
		if (cur_hw_state >= G_MISTP_LEARN_STATE &&
		    hw_state <= G_MISTP_LISTEN_STATE) {
			if (bcm_sf2_sw_fast_age_port(ds, port)) {
				pr_err("%s: fast-ageing failed\n", __func__);
				return;
			}
		}
	}

	reg = core_readl(priv, CORE_G_PCTL_PORT(port));
	reg &= ~(G_MISTP_STATE_MASK << G_MISTP_STATE_SHIFT);
	reg |= hw_state;
	core_writel(priv, reg, CORE_G_PCTL_PORT(port));
}

/* Address Resolution Logic routines */
static int bcm_sf2_arl_op_wait(struct bcm_sf2_priv *priv)
{
	unsigned int timeout = 10;
	u32 reg;

	do {
		reg = core_readl(priv, CORE_ARLA_RWCTL);
		if (!(reg & ARL_STRTDN))
			return 0;

		usleep_range(1000, 2000);
	} while (timeout--);

	return -ETIMEDOUT;
}

static int bcm_sf2_arl_rw_op(struct bcm_sf2_priv *priv, unsigned int op)
{
	u32 cmd;

	if (op > ARL_RW)
		return -EINVAL;

	cmd = core_readl(priv, CORE_ARLA_RWCTL);
	cmd &= ~IVL_SVL_SELECT;
	cmd |= ARL_STRTDN;
	if (op)
		cmd |= ARL_RW;
	else
		cmd &= ~ARL_RW;
	core_writel(priv, cmd, CORE_ARLA_RWCTL);

	return bcm_sf2_arl_op_wait(priv);
}

static int bcm_sf2_arl_read(struct bcm_sf2_priv *priv, u64 mac,
			    u16 vid, struct bcm_sf2_arl_entry *ent, u8 *idx,
			    bool is_valid)
{
	unsigned int i;
	int ret;

	ret = bcm_sf2_arl_op_wait(priv);
	if (ret)
		return ret;

	/* Read the 4 bins */
	for (i = 0; i < 4; i++) {
		u64 mac_vid;
		u32 fwd_entry;

		mac_vid = core_readq(priv, CORE_ARLA_MACVID_ENTRY(i));
		fwd_entry = core_readl(priv, CORE_ARLA_FWD_ENTRY(i));
		bcm_sf2_arl_to_entry(ent, mac_vid, fwd_entry);

		if (ent->is_valid && is_valid) {
			*idx = i;
			return 0;
		}

		/* This is the MAC we just deleted */
		if (!is_valid && (mac_vid & mac))
			return 0;
	}

	return -ENOENT;
}

static int bcm_sf2_arl_op(struct bcm_sf2_priv *priv, int op, int port,
			  const unsigned char *addr, u16 vid, bool is_valid)
{
	struct bcm_sf2_arl_entry ent;
	u32 fwd_entry;
	u64 mac, mac_vid = 0;
	u8 idx = 0;
	int ret;

	/* Convert the array into a 64-bit MAC */
	mac = bcm_sf2_mac_to_u64(addr);

	/* Perform a read for the given MAC and VID */
	core_writeq(priv, mac, CORE_ARLA_MAC);
	core_writel(priv, vid, CORE_ARLA_VID);

	/* Issue a read operation for this MAC */
	ret = bcm_sf2_arl_rw_op(priv, 1);
	if (ret)
		return ret;

	ret = bcm_sf2_arl_read(priv, mac, vid, &ent, &idx, is_valid);
	/* If this is a read, just finish now */
	if (op)
		return ret;

	/* We could not find a matching MAC, so reset to a new entry */
	if (ret) {
		fwd_entry = 0;
		idx = 0;
	}

	memset(&ent, 0, sizeof(ent));
	ent.port = port;
	ent.is_valid = is_valid;
	ent.vid = vid;
	ent.is_static = true;
	memcpy(ent.mac, addr, ETH_ALEN);
	bcm_sf2_arl_from_entry(&mac_vid, &fwd_entry, &ent);

	core_writeq(priv, mac_vid, CORE_ARLA_MACVID_ENTRY(idx));
	core_writel(priv, fwd_entry, CORE_ARLA_FWD_ENTRY(idx));

	ret = bcm_sf2_arl_rw_op(priv, 0);
	if (ret)
		return ret;

	/* Re-read the entry to check */
	return bcm_sf2_arl_read(priv, mac, vid, &ent, &idx, is_valid);
}

static int bcm_sf2_sw_fdb_prepare(struct dsa_switch *ds, int port,
				  const struct switchdev_obj_port_fdb *fdb,
				  struct switchdev_trans *trans)
{
	/* We do not need to do anything specific here yet */
	return 0;
}

static void bcm_sf2_sw_fdb_add(struct dsa_switch *ds, int port,
			       const struct switchdev_obj_port_fdb *fdb,
			       struct switchdev_trans *trans)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	if (bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, true))
		pr_err("%s: failed to add MAC address\n", __func__);
}

static int bcm_sf2_sw_fdb_del(struct dsa_switch *ds, int port,
			      const struct switchdev_obj_port_fdb *fdb)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	return bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, false);
}

static int bcm_sf2_arl_search_wait(struct bcm_sf2_priv *priv)
{
	unsigned timeout = 1000;
	u32 reg;

	do {
		reg = core_readl(priv, CORE_ARLA_SRCH_CTL);
		if (!(reg & ARLA_SRCH_STDN))
			return 0;

		if (reg & ARLA_SRCH_VLID)
			return 0;

		usleep_range(1000, 2000);
	} while (timeout--);

	return -ETIMEDOUT;
}

static void bcm_sf2_arl_search_rd(struct bcm_sf2_priv *priv, u8 idx,
				  struct bcm_sf2_arl_entry *ent)
{
	u64 mac_vid;
	u32 fwd_entry;

	mac_vid = core_readq(priv, CORE_ARLA_SRCH_RSLT_MACVID(idx));
	fwd_entry = core_readl(priv, CORE_ARLA_SRCH_RSLT(idx));
	bcm_sf2_arl_to_entry(ent, mac_vid, fwd_entry);
}

static int bcm_sf2_sw_fdb_copy(struct net_device *dev, int port,
			       const struct bcm_sf2_arl_entry *ent,
			       struct switchdev_obj_port_fdb *fdb,
			       int (*cb)(struct switchdev_obj *obj))
{
	if (!ent->is_valid)
		return 0;

	if (port != ent->port)
		return 0;

	ether_addr_copy(fdb->addr, ent->mac);
	fdb->vid = ent->vid;
	fdb->ndm_state = ent->is_static ? NUD_NOARP : NUD_REACHABLE;

	return cb(&fdb->obj);
}

static int bcm_sf2_sw_fdb_dump(struct dsa_switch *ds, int port,
			       struct switchdev_obj_port_fdb *fdb,
			       int (*cb)(struct switchdev_obj *obj))
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct net_device *dev = ds->ports[port].netdev;
	struct bcm_sf2_arl_entry results[2];
	unsigned int count = 0;
	int ret;

	/* Start search operation */
	core_writel(priv, ARLA_SRCH_STDN, CORE_ARLA_SRCH_CTL);

	do {
		ret = bcm_sf2_arl_search_wait(priv);
		if (ret)
			return ret;

		/* Read both entries, then return their values back */
		bcm_sf2_arl_search_rd(priv, 0, &results[0]);
		ret = bcm_sf2_sw_fdb_copy(dev, port, &results[0], fdb, cb);
		if (ret)
			return ret;

		bcm_sf2_arl_search_rd(priv, 1, &results[1]);
		ret = bcm_sf2_sw_fdb_copy(dev, port, &results[1], fdb, cb);
		if (ret)
			return ret;

		if (!results[0].is_valid && !results[1].is_valid)
			break;

	} while (count++ < CORE_ARLA_NUM_ENTRIES);

	return 0;
}

static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
			       int regnum, u16 val)
{
	int ret = 0;
	u32 reg;

	reg = reg_readl(priv, REG_SWITCH_CNTRL);
	reg |= MDIO_MASTER_SEL;
	reg_writel(priv, reg, REG_SWITCH_CNTRL);

	/* Page << 8 | offset */
	reg = 0x70;
	reg <<= 2;
	core_writel(priv, addr, reg);

	/* Page << 8 | offset */
	reg = 0x80 << 8 | regnum << 1;
	reg <<= 2;

	if (op)
		ret = core_readl(priv, reg);
	else
		core_writel(priv, val, reg);

	reg = reg_readl(priv, REG_SWITCH_CNTRL);
	reg &= ~MDIO_MASTER_SEL;
	reg_writel(priv, reg, REG_SWITCH_CNTRL);

	return ret & 0xffff;
}

static int bcm_sf2_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
{
	struct bcm_sf2_priv *priv = bus->priv;

	/* Intercept reads from Broadcom pseudo-PHY address, else, send
	 * them to our master MDIO bus controller
	 */
	if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
		return bcm_sf2_sw_indir_rw(priv, 1, addr, regnum, 0);
	else
		return mdiobus_read(priv->master_mii_bus, addr, regnum);
}

static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
				 u16 val)
{
	struct bcm_sf2_priv *priv = bus->priv;

	/* Intercept writes to the Broadcom pseudo-PHY address, else,
	 * send them to our master MDIO bus controller
	 */
	if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
		bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
	else
		mdiobus_write(priv->master_mii_bus, addr, regnum, val);

	return 0;
}

static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
{
	struct bcm_sf2_priv *priv = dev_id;

	priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) &
				~priv->irq0_mask;
	intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);

	return IRQ_HANDLED;
}

static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id)
{
	struct bcm_sf2_priv *priv = dev_id;

	priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) &
				~priv->irq1_mask;
	intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);

	if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF))
		priv->port_sts[7].link = 1;
	if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF))
		priv->port_sts[7].link = 0;

	return IRQ_HANDLED;
}

static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
{
	unsigned int timeout = 1000;
	u32 reg;

	reg = core_readl(priv, CORE_WATCHDOG_CTRL);
	reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
	core_writel(priv, reg, CORE_WATCHDOG_CTRL);

	do {
		reg = core_readl(priv, CORE_WATCHDOG_CTRL);
		if (!(reg & SOFTWARE_RESET))
			break;

		usleep_range(1000, 2000);
	} while (timeout-- > 0);

	if (timeout == 0)
		return -ETIMEDOUT;

	return 0;
}

static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
{
	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
}

static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
				   struct device_node *dn)
{
	struct device_node *port;
	const char *phy_mode_str;
	int mode;
	unsigned int port_num;
	int ret;

	priv->moca_port = -1;

	for_each_available_child_of_node(dn, port) {
		if (of_property_read_u32(port, "reg", &port_num))
			continue;

		/* Internal PHYs get assigned a specific 'phy-mode' property
		 * value: "internal" to help flag them before MDIO probing
		 * has completed, since they might be turned off at that
		 * time
		 */
		mode = of_get_phy_mode(port);
		if (mode < 0) {
			ret = of_property_read_string(port, "phy-mode",
						      &phy_mode_str);
			if (ret < 0)
				continue;

			if (!strcasecmp(phy_mode_str, "internal"))
				priv->int_phy_mask |= 1 << port_num;
		}

		if (mode == PHY_INTERFACE_MODE_MOCA)
			priv->moca_port = port_num;
	}
}

static int bcm_sf2_mdio_register(struct dsa_switch *ds)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct device_node *dn;
	static int index;
	int err;

	/* Find our integrated MDIO bus node */
	dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio");
	priv->master_mii_bus = of_mdio_find_bus(dn);
	if (!priv->master_mii_bus)
		return -EPROBE_DEFER;

	get_device(&priv->master_mii_bus->dev);
	priv->master_mii_dn = dn;

	priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
	if (!priv->slave_mii_bus)
		return -ENOMEM;

	priv->slave_mii_bus->priv = priv;
	priv->slave_mii_bus->name = "sf2 slave mii";
	priv->slave_mii_bus->read = bcm_sf2_sw_mdio_read;
	priv->slave_mii_bus->write = bcm_sf2_sw_mdio_write;
	snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d",
		 index++);
	priv->slave_mii_bus->dev.of_node = dn;

	/* Include the pseudo-PHY address to divert reads towards our
	 * workaround. This is only required for 7445D0, since 7445E0
	 * disconnects the internal switch pseudo-PHY such that we can use the
	 * regular SWITCH_MDIO master controller instead.
	 *
	 * Here we flag the pseudo PHY as needing special treatment and would
	 * otherwise make all other PHY read/writes go to the master MDIO bus
	 * controller that comes with this switch backed by the "mdio-unimac"
	 * driver.
	 */
	if (of_machine_is_compatible("brcm,bcm7445d0"))
		priv->indir_phy_mask |= (1 << BRCM_PSEUDO_PHY_ADDR);
	else
		priv->indir_phy_mask = 0;

	ds->phys_mii_mask = priv->indir_phy_mask;
	ds->slave_mii_bus = priv->slave_mii_bus;
	priv->slave_mii_bus->parent = ds->dev->parent;
	priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask;

	if (dn)
		err = of_mdiobus_register(priv->slave_mii_bus, dn);
	else
		err = mdiobus_register(priv->slave_mii_bus);

	if (err)
		of_node_put(dn);

	return err;
}

static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
{
	mdiobus_unregister(priv->slave_mii_bus);
	if (priv->master_mii_dn)
		of_node_put(priv->master_mii_dn);
}

static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
{
	return 0;
}

static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	/* The BCM7xxx PHY driver expects to find the integrated PHY revision
	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
	 * the REG_PHY_REVISION register layout is.
	 */

	return priv->hw_params.gphy_rev;
}

static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
				   struct phy_device *phydev)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 id_mode_dis = 0, port_mode;
	const char *str = NULL;
	u32 reg;

	switch (phydev->interface) {
	case PHY_INTERFACE_MODE_RGMII:
		str = "RGMII (no delay)";
		id_mode_dis = 1;
	case PHY_INTERFACE_MODE_RGMII_TXID:
		if (!str)
			str = "RGMII (TX delay)";
		port_mode = EXT_GPHY;
		break;
	case PHY_INTERFACE_MODE_MII:
		str = "MII";
		port_mode = EXT_EPHY;
		break;
	case PHY_INTERFACE_MODE_REVMII:
		str = "Reverse MII";
		port_mode = EXT_REVMII;
		break;
	default:
		/* All other PHYs: internal and MoCA */
		goto force_link;
	}

	/* If the link is down, just disable the interface to conserve power */
	if (!phydev->link) {
		reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
		reg &= ~RGMII_MODE_EN;
		reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
		goto force_link;
	}

	/* Clear id_mode_dis bit, and the existing port mode, but
	 * make sure we enable the RGMII block for data to pass
	 */
	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
	reg &= ~ID_MODE_DIS;
	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
	reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);

	reg |= port_mode | RGMII_MODE_EN;
	if (id_mode_dis)
		reg |= ID_MODE_DIS;

	if (phydev->pause) {
		if (phydev->asym_pause)
			reg |= TX_PAUSE_EN;
		reg |= RX_PAUSE_EN;
	}

	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));

	pr_info("Port %d configured for %s\n", port, str);

force_link:
	/* Force link settings detected from the PHY */
	reg = SW_OVERRIDE;
	switch (phydev->speed) {
	case SPEED_1000:
		reg |= SPDSTS_1000 << SPEED_SHIFT;
		break;
	case SPEED_100:
		reg |= SPDSTS_100 << SPEED_SHIFT;
		break;
	}

	if (phydev->link)
		reg |= LINK_STS;
	if (phydev->duplex == DUPLEX_FULL)
		reg |= DUPLX_MODE;

	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
}

static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
					 struct fixed_phy_status *status)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	u32 duplex, pause;
	u32 reg;

	duplex = core_readl(priv, CORE_DUPSTS);
	pause = core_readl(priv, CORE_PAUSESTS);

	status->link = 0;

	/* MoCA port is special as we do not get link status from CORE_LNKSTS,
	 * which means that we need to force the link at the port override
	 * level to get the data to flow. We do use what the interrupt handler
	 * did determine before.
	 *
	 * For the other ports, we just force the link status, since this is
	 * a fixed PHY device.
	 */
	if (port == priv->moca_port) {
		status->link = priv->port_sts[port].link;
		/* For MoCA interfaces, also force a link down notification
		 * since some version of the user-space daemon (mocad) use
		 * cmd->autoneg to force the link, which messes up the PHY
		 * state machine and make it go in PHY_FORCING state instead.
		 */
		if (!status->link)
			netif_carrier_off(ds->ports[port].netdev);
		status->duplex = 1;
	} else {
		status->link = 1;
		status->duplex = !!(duplex & (1 << port));
	}

	reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
	reg |= SW_OVERRIDE;
	if (status->link)
		reg |= LINK_STS;
	else
		reg &= ~LINK_STS;
	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));

	if ((pause & (1 << port)) &&
	    (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
		status->asym_pause = 1;
		status->pause = 1;
	}

	if (pause & (1 << port))
		status->pause = 1;
}

static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	unsigned int port;

	bcm_sf2_intr_disable(priv);

	/* Disable all ports physically present including the IMP
	 * port, the other ones have already been disabled during
	 * bcm_sf2_sw_setup
	 */
	for (port = 0; port < DSA_MAX_PORTS; port++) {
		if ((1 << port) & ds->enabled_port_mask ||
		    dsa_is_cpu_port(ds, port))
			bcm_sf2_port_disable(ds, port, NULL);
	}

	return 0;
}

static int bcm_sf2_sw_resume(struct dsa_switch *ds)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	unsigned int port;
	int ret;

	ret = bcm_sf2_sw_rst(priv);
	if (ret) {
		pr_err("%s: failed to software reset switch\n", __func__);
		return ret;
	}

	if (priv->hw_params.num_gphy == 1)
		bcm_sf2_gphy_enable_set(ds, true);

	for (port = 0; port < DSA_MAX_PORTS; port++) {
		if ((1 << port) & ds->enabled_port_mask)
			bcm_sf2_port_setup(ds, port, NULL);
		else if (dsa_is_cpu_port(ds, port))
			bcm_sf2_imp_setup(ds, port);
	}

	return 0;
}

static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
			       struct ethtool_wolinfo *wol)
{
	struct net_device *p = ds->dst[ds->index].master_netdev;
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct ethtool_wolinfo pwol;

	/* Get the parent device WoL settings */
	p->ethtool_ops->get_wol(p, &pwol);

	/* Advertise the parent device supported settings */
	wol->supported = pwol.supported;
	memset(&wol->sopass, 0, sizeof(wol->sopass));

	if (pwol.wolopts & WAKE_MAGICSECURE)
		memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass));

	if (priv->wol_ports_mask & (1 << port))
		wol->wolopts = pwol.wolopts;
	else
		wol->wolopts = 0;
}

static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
			      struct ethtool_wolinfo *wol)
{
	struct net_device *p = ds->dst[ds->index].master_netdev;
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	s8 cpu_port = ds->dst[ds->index].cpu_port;
	struct ethtool_wolinfo pwol;

	p->ethtool_ops->get_wol(p, &pwol);
	if (wol->wolopts & ~pwol.supported)
		return -EINVAL;

	if (wol->wolopts)
		priv->wol_ports_mask |= (1 << port);
	else
		priv->wol_ports_mask &= ~(1 << port);

	/* If we have at least one port enabled, make sure the CPU port
	 * is also enabled. If the CPU port is the last one enabled, we disable
	 * it since this configuration does not make sense.
	 */
	if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port))
		priv->wol_ports_mask |= (1 << cpu_port);
	else
		priv->wol_ports_mask &= ~(1 << cpu_port);

	return p->ethtool_ops->set_wol(p, wol);
}

static void bcm_sf2_enable_vlan(struct bcm_sf2_priv *priv, bool enable)
{
	u32 mgmt, vc0, vc1, vc4, vc5;

	mgmt = core_readl(priv, CORE_SWMODE);
	vc0 = core_readl(priv, CORE_VLAN_CTRL0);
	vc1 = core_readl(priv, CORE_VLAN_CTRL1);
	vc4 = core_readl(priv, CORE_VLAN_CTRL4);
	vc5 = core_readl(priv, CORE_VLAN_CTRL5);

	mgmt &= ~SW_FWDG_MODE;

	if (enable) {
		vc0 |= VLAN_EN | VLAN_LEARN_MODE_IVL;
		vc1 |= EN_RSV_MCAST_UNTAG | EN_RSV_MCAST_FWDMAP;
		vc4 &= ~(INGR_VID_CHK_MASK << INGR_VID_CHK_SHIFT);
		vc4 |= INGR_VID_CHK_DROP;
		vc5 |= DROP_VTABLE_MISS | EN_VID_FFF_FWD;
	} else {
		vc0 &= ~(VLAN_EN | VLAN_LEARN_MODE_IVL);
		vc1 &= ~(EN_RSV_MCAST_UNTAG | EN_RSV_MCAST_FWDMAP);
		vc4 &= ~(INGR_VID_CHK_MASK << INGR_VID_CHK_SHIFT);
		vc5 &= ~(DROP_VTABLE_MISS | EN_VID_FFF_FWD);
		vc4 |= INGR_VID_CHK_VID_VIOL_IMP;
	}

	core_writel(priv, vc0, CORE_VLAN_CTRL0);
	core_writel(priv, vc1, CORE_VLAN_CTRL1);
	core_writel(priv, 0, CORE_VLAN_CTRL3);
	core_writel(priv, vc4, CORE_VLAN_CTRL4);
	core_writel(priv, vc5, CORE_VLAN_CTRL5);
	core_writel(priv, mgmt, CORE_SWMODE);
}

static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	unsigned int port;

	/* Clear all VLANs */
	bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR);

	for (port = 0; port < priv->hw_params.num_ports; port++) {
		if (!((1 << port) & ds->enabled_port_mask))
			continue;

		core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port));
	}
}

static int bcm_sf2_sw_vlan_filtering(struct dsa_switch *ds, int port,
				     bool vlan_filtering)
{
	return 0;
}

static int bcm_sf2_sw_vlan_prepare(struct dsa_switch *ds, int port,
				   const struct switchdev_obj_port_vlan *vlan,
				   struct switchdev_trans *trans)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	bcm_sf2_enable_vlan(priv, true);

	return 0;
}

static void bcm_sf2_sw_vlan_add(struct dsa_switch *ds, int port,
				const struct switchdev_obj_port_vlan *vlan,
				struct switchdev_trans *trans)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
	s8 cpu_port = ds->dst->cpu_port;
	struct bcm_sf2_vlan *vl;
	u16 vid;

	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
		vl = &priv->vlans[vid];

		bcm_sf2_get_vlan_entry(priv, vid, vl);

		vl->members |= BIT(port) | BIT(cpu_port);
		if (untagged)
			vl->untag |= BIT(port) | BIT(cpu_port);
		else
			vl->untag &= ~(BIT(port) | BIT(cpu_port));

		bcm_sf2_set_vlan_entry(priv, vid, vl);
		bcm_sf2_sw_fast_age_vlan(priv, vid);
	}

	if (pvid) {
		core_writel(priv, vlan->vid_end, CORE_DEFAULT_1Q_TAG_P(port));
		core_writel(priv, vlan->vid_end,
			    CORE_DEFAULT_1Q_TAG_P(cpu_port));
		bcm_sf2_sw_fast_age_vlan(priv, vid);
	}
}

static int bcm_sf2_sw_vlan_del(struct dsa_switch *ds, int port,
			       const struct switchdev_obj_port_vlan *vlan)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
	s8 cpu_port = ds->dst->cpu_port;
	struct bcm_sf2_vlan *vl;
	u16 vid, pvid;
	int ret;

	pvid = core_readl(priv, CORE_DEFAULT_1Q_TAG_P(port));

	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
		vl = &priv->vlans[vid];

		ret = bcm_sf2_get_vlan_entry(priv, vid, vl);
		if (ret)
			return ret;

		vl->members &= ~BIT(port);
		if ((vl->members & BIT(cpu_port)) == BIT(cpu_port))
			vl->members = 0;
		if (pvid == vid)
			pvid = 0;
		if (untagged) {
			vl->untag &= ~BIT(port);
			if ((vl->untag & BIT(port)) == BIT(cpu_port))
				vl->untag = 0;
		}

		bcm_sf2_set_vlan_entry(priv, vid, vl);
		bcm_sf2_sw_fast_age_vlan(priv, vid);
	}

	core_writel(priv, pvid, CORE_DEFAULT_1Q_TAG_P(port));
	core_writel(priv, pvid, CORE_DEFAULT_1Q_TAG_P(cpu_port));
	bcm_sf2_sw_fast_age_vlan(priv, vid);

	return 0;
}

static int bcm_sf2_sw_vlan_dump(struct dsa_switch *ds, int port,
				struct switchdev_obj_port_vlan *vlan,
				int (*cb)(struct switchdev_obj *obj))
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	struct bcm_sf2_port_status *p = &priv->port_sts[port];
	struct bcm_sf2_vlan *vl;
	u16 vid, pvid;
	int err = 0;

	pvid = core_readl(priv, CORE_DEFAULT_1Q_TAG_P(port));

	for (vid = 0; vid < VLAN_N_VID; vid++) {
		vl = &priv->vlans[vid];

		if (!(vl->members & BIT(port)))
			continue;

		vlan->vid_begin = vlan->vid_end = vid;
		vlan->flags = 0;

		if (vl->untag & BIT(port))
			vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
		if (p->pvid == vid)
			vlan->flags |= BRIDGE_VLAN_INFO_PVID;

		err = cb(&vlan->obj);
		if (err)
			break;
	}

	return err;
}

static int bcm_sf2_sw_setup(struct dsa_switch *ds)
{
	struct bcm_sf2_priv *priv = ds_to_priv(ds);
	unsigned int port;

	/* Enable all valid ports and disable those unused */
	for (port = 0; port < priv->hw_params.num_ports; port++) {
		/* IMP port receives special treatment */
		if ((1 << port) & ds->enabled_port_mask)
			bcm_sf2_port_setup(ds, port, NULL);
		else if (dsa_is_cpu_port(ds, port))
			bcm_sf2_imp_setup(ds, port);
		else
			bcm_sf2_port_disable(ds, port, NULL);
	}

	bcm_sf2_sw_configure_vlan(ds);

	return 0;
}

static struct dsa_switch_driver bcm_sf2_switch_driver = {
	.tag_protocol		= DSA_TAG_PROTO_BRCM,
	.setup			= bcm_sf2_sw_setup,
	.set_addr		= bcm_sf2_sw_set_addr,
	.get_phy_flags		= bcm_sf2_sw_get_phy_flags,
	.get_strings		= bcm_sf2_sw_get_strings,
	.get_ethtool_stats	= bcm_sf2_sw_get_ethtool_stats,
	.get_sset_count		= bcm_sf2_sw_get_sset_count,
	.adjust_link		= bcm_sf2_sw_adjust_link,
	.fixed_link_update	= bcm_sf2_sw_fixed_link_update,
	.suspend		= bcm_sf2_sw_suspend,
	.resume			= bcm_sf2_sw_resume,
	.get_wol		= bcm_sf2_sw_get_wol,
	.set_wol		= bcm_sf2_sw_set_wol,
	.port_enable		= bcm_sf2_port_setup,
	.port_disable		= bcm_sf2_port_disable,
	.get_eee		= bcm_sf2_sw_get_eee,
	.set_eee		= bcm_sf2_sw_set_eee,
	.port_bridge_join	= bcm_sf2_sw_br_join,
	.port_bridge_leave	= bcm_sf2_sw_br_leave,
	.port_stp_state_set	= bcm_sf2_sw_br_set_stp_state,
	.port_fdb_prepare	= bcm_sf2_sw_fdb_prepare,
	.port_fdb_add		= bcm_sf2_sw_fdb_add,
	.port_fdb_del		= bcm_sf2_sw_fdb_del,
	.port_fdb_dump		= bcm_sf2_sw_fdb_dump,
	.port_vlan_filtering	= bcm_sf2_sw_vlan_filtering,
	.port_vlan_prepare	= bcm_sf2_sw_vlan_prepare,
	.port_vlan_add		= bcm_sf2_sw_vlan_add,
	.port_vlan_del		= bcm_sf2_sw_vlan_del,
	.port_vlan_dump		= bcm_sf2_sw_vlan_dump,
};

static int bcm_sf2_sw_probe(struct platform_device *pdev)
{
	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
	struct device_node *dn = pdev->dev.of_node;
	struct bcm_sf2_priv *priv;
	struct dsa_switch *ds;
	void __iomem **base;
	struct resource *r;
	unsigned int i;
	u32 reg, rev;
	int ret;

	ds = devm_kzalloc(&pdev->dev, sizeof(*ds) + sizeof(*priv), GFP_KERNEL);
	if (!ds)
		return -ENOMEM;

	priv = (struct bcm_sf2_priv *)(ds + 1);
	ds->priv = priv;
	ds->dev = &pdev->dev;
	ds->drv = &bcm_sf2_switch_driver;

	dev_set_drvdata(&pdev->dev, ds);

	spin_lock_init(&priv->indir_lock);
	mutex_init(&priv->stats_mutex);

	bcm_sf2_identify_ports(priv, dn->child);

	priv->irq0 = irq_of_parse_and_map(dn, 0);
	priv->irq1 = irq_of_parse_and_map(dn, 1);

	base = &priv->core;
	for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
		r = platform_get_resource(pdev, IORESOURCE_MEM, i);
		*base = devm_ioremap_resource(&pdev->dev, r);
		if (IS_ERR(*base)) {
			pr_err("unable to find register: %s\n", reg_names[i]);
			return PTR_ERR(*base);
		}
		base++;
	}

	ret = bcm_sf2_sw_rst(priv);
	if (ret) {
		pr_err("unable to software reset switch: %d\n", ret);
		return ret;
	}

	ret = bcm_sf2_mdio_register(ds);
	if (ret) {
		pr_err("failed to register MDIO bus\n");
		return ret;
	}

	/* Disable all interrupts and request them */
	bcm_sf2_intr_disable(priv);

	ret = devm_request_irq(&pdev->dev, priv->irq0, bcm_sf2_switch_0_isr, 0,
			       "switch_0", priv);
	if (ret < 0) {
		pr_err("failed to request switch_0 IRQ\n");
		goto out_mdio;
	}

	ret = devm_request_irq(&pdev->dev, priv->irq1, bcm_sf2_switch_1_isr, 0,
			       "switch_1", priv);
	if (ret < 0) {
		pr_err("failed to request switch_1 IRQ\n");
		goto out_mdio;
	}

	/* Reset the MIB counters */
	reg = core_readl(priv, CORE_GMNCFGCFG);
	reg |= RST_MIB_CNT;
	core_writel(priv, reg, CORE_GMNCFGCFG);
	reg &= ~RST_MIB_CNT;
	core_writel(priv, reg, CORE_GMNCFGCFG);

	/* Get the maximum number of ports for this switch */
	priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
	if (priv->hw_params.num_ports > DSA_MAX_PORTS)
		priv->hw_params.num_ports = DSA_MAX_PORTS;

	/* Assume a single GPHY setup if we can't read that property */
	if (of_property_read_u32(dn, "brcm,num-gphy",
				 &priv->hw_params.num_gphy))
		priv->hw_params.num_gphy = 1;

	rev = reg_readl(priv, REG_SWITCH_REVISION);
	priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
					SWITCH_TOP_REV_MASK;
	priv->hw_params.core_rev = (rev & SF2_REV_MASK);

	rev = reg_readl(priv, REG_PHY_REVISION);
	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;

	ret = dsa_register_switch(ds, dn);
	if (ret)
		goto out_mdio;

	pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
		priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
		priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
		priv->core, priv->irq0, priv->irq1);

	return 0;

out_mdio:
	bcm_sf2_mdio_unregister(priv);
	return ret;
}

static int bcm_sf2_sw_remove(struct platform_device *pdev)
{
	struct dsa_switch *ds = platform_get_drvdata(pdev);
	struct bcm_sf2_priv *priv = ds_to_priv(ds);

	/* Disable all ports and interrupts */
	priv->wol_ports_mask = 0;
	bcm_sf2_sw_suspend(ds);
	dsa_unregister_switch(ds);
	bcm_sf2_mdio_unregister(priv);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int bcm_sf2_suspend(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct dsa_switch *ds = platform_get_drvdata(pdev);

	return dsa_switch_suspend(ds);
}

static int bcm_sf2_resume(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct dsa_switch *ds = platform_get_drvdata(pdev);

	return dsa_switch_resume(ds);
}
#endif /* CONFIG_PM_SLEEP */

static SIMPLE_DEV_PM_OPS(bcm_sf2_pm_ops,
			 bcm_sf2_suspend, bcm_sf2_resume);

static const struct of_device_id bcm_sf2_of_match[] = {
	{ .compatible = "brcm,bcm7445-switch-v4.0" },
	{ /* sentinel */ },
};

static struct platform_driver bcm_sf2_driver = {
	.probe	= bcm_sf2_sw_probe,
	.remove	= bcm_sf2_sw_remove,
	.driver = {
		.name = "brcm-sf2",
		.of_match_table = bcm_sf2_of_match,
		.pm = &bcm_sf2_pm_ops,
	},
};
module_platform_driver(bcm_sf2_driver);

MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:brcm-sf2");