2005-04-17 02:20:36 +04:00
# ifndef _SCSI_SCSI_TCQ_H
# define _SCSI_SCSI_TCQ_H
# include <linux/blkdev.h>
# include <scsi/scsi_cmnd.h>
# include <scsi/scsi_device.h>
2006-08-30 17:45:51 +04:00
# include <scsi/scsi_host.h>
2005-04-17 02:20:36 +04:00
# define MSG_SIMPLE_TAG 0x20
# define MSG_HEAD_TAG 0x21
# define MSG_ORDERED_TAG 0x22
# define SCSI_NO_TAG (-1) /* identify no tag in use */
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# ifdef CONFIG_BLOCK
2005-04-17 02:20:36 +04:00
/**
* scsi_get_tag_type - get the type of tag the device supports
* @ sdev : the scsi device
*
* Notes :
* If the drive only supports simple tags , returns MSG_SIMPLE_TAG
* if it supports all tag types , returns MSG_ORDERED_TAG .
*/
static inline int scsi_get_tag_type ( struct scsi_device * sdev )
{
if ( ! sdev - > tagged_supported )
return 0 ;
if ( sdev - > ordered_tags )
return MSG_ORDERED_TAG ;
if ( sdev - > simple_tags )
return MSG_SIMPLE_TAG ;
return 0 ;
}
static inline void scsi_set_tag_type ( struct scsi_device * sdev , int tag )
{
switch ( tag ) {
case MSG_ORDERED_TAG :
sdev - > ordered_tags = 1 ;
/* fall through */
case MSG_SIMPLE_TAG :
sdev - > simple_tags = 1 ;
break ;
case 0 :
/* fall through */
default :
sdev - > ordered_tags = 0 ;
sdev - > simple_tags = 0 ;
break ;
}
}
/**
* scsi_activate_tcq - turn on tag command queueing
* @ SDpnt : device to turn on TCQ for
* @ depth : queue depth
*
* Notes :
* Eventually , I hope depth would be the maximum depth
* the device could cope with and the real queue depth
* would be adjustable from 0 to depth .
* */
static inline void scsi_activate_tcq ( struct scsi_device * sdev , int depth )
{
if ( ! sdev - > tagged_supported )
return ;
if ( ! blk_queue_tagged ( sdev - > request_queue ) )
2006-08-30 17:45:51 +04:00
blk_queue_init_tags ( sdev - > request_queue , depth ,
sdev - > host - > bqt ) ;
2005-04-17 02:20:36 +04:00
scsi_adjust_queue_depth ( sdev , scsi_get_tag_type ( sdev ) , depth ) ;
}
/**
* scsi_deactivate_tcq - turn off tag command queueing
* @ SDpnt : device to turn off TCQ for
* */
static inline void scsi_deactivate_tcq ( struct scsi_device * sdev , int depth )
{
if ( blk_queue_tagged ( sdev - > request_queue ) )
blk_queue_free_tags ( sdev - > request_queue ) ;
scsi_adjust_queue_depth ( sdev , 0 , depth ) ;
}
/**
* scsi_populate_tag_msg - place a tag message in a buffer
* @ SCpnt : pointer to the Scsi_Cmnd for the tag
* @ msg : pointer to the area to place the tag
*
* Notes :
* designed to create the correct type of tag message for the
* particular request . Returns the size of the tag message .
* May return 0 if TCQ is disabled for this device .
* */
static inline int scsi_populate_tag_msg ( struct scsi_cmnd * cmd , char * msg )
{
struct request * req = cmd - > request ;
struct scsi_device * sdev = cmd - > device ;
if ( blk_rq_tagged ( req ) ) {
2006-08-10 10:44:47 +04:00
if ( sdev - > ordered_tags & & req - > cmd_flags & REQ_HARDBARRIER )
2005-04-17 02:20:36 +04:00
* msg + + = MSG_ORDERED_TAG ;
else
* msg + + = MSG_SIMPLE_TAG ;
* msg + + = req - > tag ;
return 2 ;
}
return 0 ;
}
/**
* scsi_find_tag - find a tagged command by device
* @ SDpnt : pointer to the ScSI device
* @ tag : the tag number
*
* Notes :
* Only works with tags allocated by the generic blk layer .
* */
static inline struct scsi_cmnd * scsi_find_tag ( struct scsi_device * sdev , int tag )
{
struct request * req ;
if ( tag ! = SCSI_NO_TAG ) {
req = blk_queue_find_tag ( sdev - > request_queue , tag ) ;
return req ? ( struct scsi_cmnd * ) req - > special : NULL ;
}
/* single command, look in space */
return sdev - > current_cmnd ;
}
2006-08-30 17:45:51 +04:00
/**
* scsi_init_shared_tag_map - create a shared tag map
* @ shost : the host to share the tag map among all devices
* @ depth : the total depth of the map
*/
2006-09-01 17:28:48 +04:00
static inline int scsi_init_shared_tag_map ( struct Scsi_Host * shost , int depth )
2006-08-30 17:45:51 +04:00
{
shost - > bqt = blk_init_tags ( depth ) ;
2006-09-01 17:28:48 +04:00
return shost - > bqt ? 0 : - ENOMEM ;
2006-08-30 17:45:51 +04:00
}
2006-10-04 10:27:25 +04:00
/**
* scsi_host_find_tag - find the tagged command by host
* @ shost : pointer to scsi_host
* @ tag : tag of the scsi_cmnd
*
* Notes :
* Only works with tags allocated by the generic blk layer .
* */
static inline struct scsi_cmnd * scsi_host_find_tag ( struct Scsi_Host * shost ,
int tag )
{
struct request * req ;
if ( tag ! = SCSI_NO_TAG ) {
req = blk_map_queue_find_tag ( shost - > bqt , tag ) ;
return req ? ( struct scsi_cmnd * ) req - > special : NULL ;
}
return NULL ;
}
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# endif /* CONFIG_BLOCK */
2005-04-17 02:20:36 +04:00
# endif /* _SCSI_SCSI_TCQ_H */