License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
2005-04-17 02:20:36 +04:00
/*
* linux / fs / lockd / mon . c
*
* The kernel statd client .
*
* Copyright ( C ) 1996 , Olaf Kirch < okir @ monad . swb . de >
*/
# include <linux/types.h>
# include <linux/kernel.h>
NSM: Replace IP address as our nlm_reboot lookup key
NLM provides file locking services for NFS files. Part of this service
includes a second protocol, known as NSM, which is a reboot
notification service. NLM uses this service to determine when to
reclaim locks or enter a grace period after a client or server reboots.
The NLM service (implemented by lockd in the Linux kernel) contacts
the local NSM service (implemented by rpc.statd in Linux user space)
via NSM protocol upcalls to register a callback when a particular
remote peer reboots.
To match the callback to the correct remote peer, the NLM service
constructs a cookie that it passes in the request. The NSM service
passes that cookie back to the NLM service when it is notified that
the given remote peer has indeed rebooted.
Currently on Linux, the cookie is the raw 32-bit IPv4 address of the
remote peer. To support IPv6 addresses, which are larger, we could
use all 16 bytes of the cookie to represent a full IPv6 address,
although we still can't represent an IPv6 address with a scope ID in
just 16 bytes.
Instead, to avoid the need for future changes to support additional
address types, we'll use a manufactured value for the cookie, and use
that to find the corresponding nsm_handle struct in the kernel during
the NLMPROC_SM_NOTIFY callback.
This should provide complete support in the kernel's NSM
implementation for IPv6 hosts, while remaining backwards compatible
with older rpc.statd implementations.
Note we also deal with another case where nsm_use_hostnames can change
while there are outstanding notifications, possibly resulting in the
loss of reboot notifications. After this patch, the priv cookie is
always used to lookup rebooted hosts in the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-12 01:56:07 +03:00
# include <linux/ktime.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
# include <linux/slab.h>
NSM: Replace IP address as our nlm_reboot lookup key
NLM provides file locking services for NFS files. Part of this service
includes a second protocol, known as NSM, which is a reboot
notification service. NLM uses this service to determine when to
reclaim locks or enter a grace period after a client or server reboots.
The NLM service (implemented by lockd in the Linux kernel) contacts
the local NSM service (implemented by rpc.statd in Linux user space)
via NSM protocol upcalls to register a callback when a particular
remote peer reboots.
To match the callback to the correct remote peer, the NLM service
constructs a cookie that it passes in the request. The NSM service
passes that cookie back to the NLM service when it is notified that
the given remote peer has indeed rebooted.
Currently on Linux, the cookie is the raw 32-bit IPv4 address of the
remote peer. To support IPv6 addresses, which are larger, we could
use all 16 bytes of the cookie to represent a full IPv6 address,
although we still can't represent an IPv6 address with a scope ID in
just 16 bytes.
Instead, to avoid the need for future changes to support additional
address types, we'll use a manufactured value for the cookie, and use
that to find the corresponding nsm_handle struct in the kernel during
the NLMPROC_SM_NOTIFY callback.
This should provide complete support in the kernel's NSM
implementation for IPv6 hosts, while remaining backwards compatible
with older rpc.statd implementations.
Note we also deal with another case where nsm_use_hostnames can change
while there are outstanding notifications, possibly resulting in the
loss of reboot notifications. After this patch, the priv cookie is
always used to lookup rebooted hosts in the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-12 01:56:07 +03:00
2005-04-17 02:20:36 +04:00
# include <linux/sunrpc/clnt.h>
2013-02-04 21:50:00 +04:00
# include <linux/sunrpc/addr.h>
2007-09-10 21:48:23 +04:00
# include <linux/sunrpc/xprtsock.h>
2005-04-17 02:20:36 +04:00
# include <linux/sunrpc/svc.h>
# include <linux/lockd/lockd.h>
2009-03-28 22:55:20 +03:00
# include <asm/unaligned.h>
2012-09-18 13:37:12 +04:00
# include "netns.h"
2005-04-17 02:20:36 +04:00
# define NLMDBG_FACILITY NLMDBG_MONITOR
2008-12-06 03:02:07 +03:00
# define NSM_PROGRAM 100024
# define NSM_VERSION 1
enum {
NSMPROC_NULL ,
NSMPROC_STAT ,
NSMPROC_MON ,
NSMPROC_UNMON ,
NSMPROC_UNMON_ALL ,
NSMPROC_SIMU_CRASH ,
NSMPROC_NOTIFY ,
} ;
2005-04-17 02:20:36 +04:00
2008-12-06 03:01:59 +03:00
struct nsm_args {
2008-12-06 03:03:24 +03:00
struct nsm_private * priv ;
2008-12-06 03:01:59 +03:00
u32 prog ; /* RPC callback info */
u32 vers ;
u32 proc ;
char * mon_name ;
2015-10-07 14:39:55 +03:00
const char * nodename ;
2008-12-06 03:01:59 +03:00
} ;
struct nsm_res {
u32 status ;
u32 state ;
} ;
2012-01-20 22:53:56 +04:00
static const struct rpc_program nsm_program ;
2008-12-06 03:02:45 +03:00
static DEFINE_SPINLOCK ( nsm_lock ) ;
2005-04-17 02:20:36 +04:00
/*
* Local NSM state
*/
lockd: Update NSM state from SM_MON replies
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18 05:02:10 +04:00
u32 __read_mostly nsm_local_state ;
2012-01-13 03:02:20 +04:00
bool __read_mostly nsm_use_hostnames ;
2005-04-17 02:20:36 +04:00
2008-12-12 01:56:22 +03:00
static inline struct sockaddr * nsm_addr ( const struct nsm_handle * nsm )
{
return ( struct sockaddr * ) & nsm - > sm_addr ;
}
2015-01-31 02:12:28 +03:00
static struct rpc_clnt * nsm_create ( struct net * net , const char * nodename )
2008-12-12 01:56:37 +03:00
{
struct sockaddr_in sin = {
. sin_family = AF_INET ,
. sin_addr . s_addr = htonl ( INADDR_LOOPBACK ) ,
} ;
struct rpc_create_args args = {
2012-01-31 15:08:21 +04:00
. net = net ,
2012-09-18 13:37:12 +04:00
. protocol = XPRT_TRANSPORT_TCP ,
2008-12-12 01:56:37 +03:00
. address = ( struct sockaddr * ) & sin ,
. addrsize = sizeof ( sin ) ,
. servername = " rpc.statd " ,
2015-01-31 02:12:28 +03:00
. nodename = nodename ,
2008-12-12 01:56:37 +03:00
. program = & nsm_program ,
. version = NSM_VERSION ,
. authflavor = RPC_AUTH_NULL ,
2009-06-18 05:02:11 +04:00
. flags = RPC_CLNT_CREATE_NOPING ,
2008-12-12 01:56:37 +03:00
} ;
return rpc_create ( & args ) ;
}
2012-01-31 15:08:21 +04:00
static int nsm_mon_unmon ( struct nsm_handle * nsm , u32 proc , struct nsm_res * res ,
2015-10-07 14:39:55 +03:00
const struct nlm_host * host )
2005-04-17 02:20:36 +04:00
{
int status ;
2015-10-07 14:39:55 +03:00
struct rpc_clnt * clnt ;
2008-12-04 22:20:23 +03:00
struct nsm_args args = {
2008-12-06 03:03:24 +03:00
. priv = & nsm - > sm_priv ,
2008-12-04 22:20:23 +03:00
. prog = NLM_PROGRAM ,
. vers = 3 ,
. proc = NLMPROC_NSM_NOTIFY ,
NSM: Support IPv6 version of mon_name
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted. The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.
When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.
To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string. Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.
This patch also addresses a subtle bug.
An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.
If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same. This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames
To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function. A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.
NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored. This patch does not attempt to address those
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-04 22:20:46 +03:00
. mon_name = nsm - > sm_mon_name ,
2015-10-07 14:39:55 +03:00
. nodename = host - > nodename ,
2008-12-04 22:20:23 +03:00
} ;
2006-03-20 21:44:23 +03:00
struct rpc_message msg = {
. rpc_argp = & args ,
. rpc_resp = res ,
} ;
2005-04-17 02:20:36 +04:00
memset ( res , 0 , sizeof ( * res ) ) ;
2015-10-07 14:39:55 +03:00
clnt = nsm_create ( host - > net , host - > nodename ) ;
if ( IS_ERR ( clnt ) ) {
dprintk ( " lockd: failed to create NSM upcall transport, "
2017-11-08 08:55:55 +03:00
" status=%ld, net=%x \n " , PTR_ERR ( clnt ) ,
host - > net - > ns . inum ) ;
2015-10-07 14:39:55 +03:00
return PTR_ERR ( clnt ) ;
}
2006-03-20 21:44:23 +03:00
msg . rpc_proc = & clnt - > cl_procinfo [ proc ] ;
2012-09-18 13:37:12 +04:00
status = rpc_call_sync ( clnt , & msg , RPC_TASK_SOFTCONN ) ;
2014-09-23 20:26:20 +04:00
if ( status = = - ECONNREFUSED ) {
dprintk ( " lockd: NSM upcall RPC failed, status=%d, forcing rebind \n " ,
status ) ;
rpc_force_rebind ( clnt ) ;
status = rpc_call_sync ( clnt , & msg , RPC_TASK_SOFTCONN ) ;
}
2005-04-17 02:20:36 +04:00
if ( status < 0 )
2008-12-04 22:20:31 +03:00
dprintk ( " lockd: NSM upcall RPC failed, status=%d \n " ,
status ) ;
2005-04-17 02:20:36 +04:00
else
status = 0 ;
2015-10-07 14:39:55 +03:00
rpc_shutdown_client ( clnt ) ;
2005-04-17 02:20:36 +04:00
return status ;
}
2008-12-04 22:21:24 +03:00
/**
* nsm_monitor - Notify a peer in case we reboot
* @ host : pointer to nlm_host of peer to notify
*
* If this peer is not already monitored , this function sends an
* upcall to the local rpc . statd to record the name / address of
* the peer to notify in case we reboot .
*
* Returns zero if the peer is monitored by the local rpc . statd ;
* otherwise a negative errno value is returned .
2005-04-17 02:20:36 +04:00
*/
2008-12-04 22:21:24 +03:00
int nsm_monitor ( const struct nlm_host * host )
2005-04-17 02:20:36 +04:00
{
2006-10-04 13:15:53 +04:00
struct nsm_handle * nsm = host - > h_nsmhandle ;
2005-04-17 02:20:36 +04:00
struct nsm_res res ;
int status ;
2008-12-04 22:20:53 +03:00
dprintk ( " lockd: nsm_monitor(%s) \n " , nsm - > sm_name ) ;
2006-10-04 13:15:53 +04:00
if ( nsm - > sm_monitored )
2006-10-04 13:15:51 +04:00
return 0 ;
2005-04-17 02:20:36 +04:00
NSM: Support IPv6 version of mon_name
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted. The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.
When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.
To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string. Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.
This patch also addresses a subtle bug.
An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.
If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same. This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames
To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function. A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.
NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored. This patch does not attempt to address those
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-04 22:20:46 +03:00
/*
* Choose whether to record the caller_name or IP address of
* this peer in the local rpc . statd ' s database .
*/
nsm - > sm_mon_name = nsm_use_hostnames ? nsm - > sm_name : nsm - > sm_addrbuf ;
2015-10-07 14:39:55 +03:00
status = nsm_mon_unmon ( nsm , NSMPROC_MON , & res , host ) ;
lockd: Update NSM state from SM_MON replies
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18 05:02:10 +04:00
if ( unlikely ( res . status ! = 0 ) )
2008-12-04 22:21:15 +03:00
status = - EIO ;
lockd: Update NSM state from SM_MON replies
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18 05:02:10 +04:00
if ( unlikely ( status < 0 ) ) {
2014-10-31 15:28:29 +03:00
pr_notice_ratelimited ( " lockd: cannot monitor %s \n " , nsm - > sm_name ) ;
lockd: Update NSM state from SM_MON replies
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18 05:02:10 +04:00
return status ;
}
nsm - > sm_monitored = 1 ;
if ( unlikely ( nsm_local_state ! = res . state ) ) {
nsm_local_state = res . state ;
dprintk ( " lockd: NSM state changed to %d \n " , nsm_local_state ) ;
}
return 0 ;
2005-04-17 02:20:36 +04:00
}
2008-12-04 22:21:38 +03:00
/**
* nsm_unmonitor - Unregister peer notification
* @ host : pointer to nlm_host of peer to stop monitoring
*
* If this peer is monitored , this function sends an upcall to
* tell the local rpc . statd not to send this peer a notification
* when we reboot .
2005-04-17 02:20:36 +04:00
*/
2008-12-04 22:21:38 +03:00
void nsm_unmonitor ( const struct nlm_host * host )
2005-04-17 02:20:36 +04:00
{
2006-10-04 13:15:53 +04:00
struct nsm_handle * nsm = host - > h_nsmhandle ;
2005-04-17 02:20:36 +04:00
struct nsm_res res ;
2008-12-04 22:21:38 +03:00
int status ;
2005-04-17 02:20:36 +04:00
2017-11-29 14:15:44 +03:00
if ( refcount_read ( & nsm - > sm_count ) = = 1
2006-10-04 13:15:56 +04:00
& & nsm - > sm_monitored & & ! nsm - > sm_sticky ) {
2008-12-04 22:20:53 +03:00
dprintk ( " lockd: nsm_unmonitor(%s) \n " , nsm - > sm_name ) ;
2006-10-04 13:15:56 +04:00
2015-10-07 14:39:55 +03:00
status = nsm_mon_unmon ( nsm , NSMPROC_UNMON , & res , host ) ;
2008-12-04 22:21:46 +03:00
if ( res . status ! = 0 )
status = - EIO ;
2006-10-04 13:15:51 +04:00
if ( status < 0 )
2006-10-04 13:15:56 +04:00
printk ( KERN_NOTICE " lockd: cannot unmonitor %s \n " ,
2008-12-04 22:20:53 +03:00
nsm - > sm_name ) ;
2006-10-04 13:15:56 +04:00
else
nsm - > sm_monitored = 0 ;
2006-10-04 13:15:51 +04:00
}
2005-04-17 02:20:36 +04:00
}
2015-09-23 15:49:29 +03:00
static struct nsm_handle * nsm_lookup_hostname ( const struct list_head * nsm_handles ,
const char * hostname , const size_t len )
2008-12-06 03:03:46 +03:00
{
struct nsm_handle * nsm ;
2015-09-23 15:49:29 +03:00
list_for_each_entry ( nsm , nsm_handles , sm_link )
2008-12-06 03:03:46 +03:00
if ( strlen ( nsm - > sm_name ) = = len & &
memcmp ( nsm - > sm_name , hostname , len ) = = 0 )
return nsm ;
return NULL ;
}
2015-09-23 15:49:29 +03:00
static struct nsm_handle * nsm_lookup_addr ( const struct list_head * nsm_handles ,
const struct sockaddr * sap )
2008-12-12 01:55:59 +03:00
{
struct nsm_handle * nsm ;
2015-09-23 15:49:29 +03:00
list_for_each_entry ( nsm , nsm_handles , sm_link )
2009-08-14 20:57:54 +04:00
if ( rpc_cmp_addr ( nsm_addr ( nsm ) , sap ) )
2008-12-12 01:55:59 +03:00
return nsm ;
return NULL ;
}
2015-09-23 15:49:29 +03:00
static struct nsm_handle * nsm_lookup_priv ( const struct list_head * nsm_handles ,
const struct nsm_private * priv )
2008-12-06 03:03:46 +03:00
{
struct nsm_handle * nsm ;
2015-09-23 15:49:29 +03:00
list_for_each_entry ( nsm , nsm_handles , sm_link )
2008-12-06 03:03:46 +03:00
if ( memcmp ( nsm - > sm_priv . data , priv - > data ,
sizeof ( priv - > data ) ) = = 0 )
return nsm ;
return NULL ;
}
2008-12-06 03:03:16 +03:00
/*
* Construct a unique cookie to match this nsm_handle to this monitored
* host . It is passed to the local rpc . statd via NSMPROC_MON , and
* returned via NLMPROC_SM_NOTIFY , in the " priv " field of these
* requests .
*
NSM: Replace IP address as our nlm_reboot lookup key
NLM provides file locking services for NFS files. Part of this service
includes a second protocol, known as NSM, which is a reboot
notification service. NLM uses this service to determine when to
reclaim locks or enter a grace period after a client or server reboots.
The NLM service (implemented by lockd in the Linux kernel) contacts
the local NSM service (implemented by rpc.statd in Linux user space)
via NSM protocol upcalls to register a callback when a particular
remote peer reboots.
To match the callback to the correct remote peer, the NLM service
constructs a cookie that it passes in the request. The NSM service
passes that cookie back to the NLM service when it is notified that
the given remote peer has indeed rebooted.
Currently on Linux, the cookie is the raw 32-bit IPv4 address of the
remote peer. To support IPv6 addresses, which are larger, we could
use all 16 bytes of the cookie to represent a full IPv6 address,
although we still can't represent an IPv6 address with a scope ID in
just 16 bytes.
Instead, to avoid the need for future changes to support additional
address types, we'll use a manufactured value for the cookie, and use
that to find the corresponding nsm_handle struct in the kernel during
the NLMPROC_SM_NOTIFY callback.
This should provide complete support in the kernel's NSM
implementation for IPv6 hosts, while remaining backwards compatible
with older rpc.statd implementations.
Note we also deal with another case where nsm_use_hostnames can change
while there are outstanding notifications, possibly resulting in the
loss of reboot notifications. After this patch, the priv cookie is
always used to lookup rebooted hosts in the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-12 01:56:07 +03:00
* The NSM protocol requires that these cookies be unique while the
* system is running . We prefer a stronger requirement of making them
* unique across reboots . If user space bugs cause a stale cookie to
* be sent to the kernel , it could cause the wrong host to lose its
* lock state if cookies were not unique across reboots .
*
* The cookies are exposed only to local user space via loopback . They
* do not appear on the physical network . If we want greater security
* for some reason , nsm_init_private ( ) could perform a one - way hash to
* obscure the contents of the cookie .
2008-12-06 03:03:16 +03:00
*/
static void nsm_init_private ( struct nsm_handle * nsm )
{
NSM: Replace IP address as our nlm_reboot lookup key
NLM provides file locking services for NFS files. Part of this service
includes a second protocol, known as NSM, which is a reboot
notification service. NLM uses this service to determine when to
reclaim locks or enter a grace period after a client or server reboots.
The NLM service (implemented by lockd in the Linux kernel) contacts
the local NSM service (implemented by rpc.statd in Linux user space)
via NSM protocol upcalls to register a callback when a particular
remote peer reboots.
To match the callback to the correct remote peer, the NLM service
constructs a cookie that it passes in the request. The NSM service
passes that cookie back to the NLM service when it is notified that
the given remote peer has indeed rebooted.
Currently on Linux, the cookie is the raw 32-bit IPv4 address of the
remote peer. To support IPv6 addresses, which are larger, we could
use all 16 bytes of the cookie to represent a full IPv6 address,
although we still can't represent an IPv6 address with a scope ID in
just 16 bytes.
Instead, to avoid the need for future changes to support additional
address types, we'll use a manufactured value for the cookie, and use
that to find the corresponding nsm_handle struct in the kernel during
the NLMPROC_SM_NOTIFY callback.
This should provide complete support in the kernel's NSM
implementation for IPv6 hosts, while remaining backwards compatible
with older rpc.statd implementations.
Note we also deal with another case where nsm_use_hostnames can change
while there are outstanding notifications, possibly resulting in the
loss of reboot notifications. After this patch, the priv cookie is
always used to lookup rebooted hosts in the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-12 01:56:07 +03:00
u64 * p = ( u64 * ) & nsm - > sm_priv . data ;
2009-03-28 22:55:20 +03:00
s64 ns ;
NSM: Replace IP address as our nlm_reboot lookup key
NLM provides file locking services for NFS files. Part of this service
includes a second protocol, known as NSM, which is a reboot
notification service. NLM uses this service to determine when to
reclaim locks or enter a grace period after a client or server reboots.
The NLM service (implemented by lockd in the Linux kernel) contacts
the local NSM service (implemented by rpc.statd in Linux user space)
via NSM protocol upcalls to register a callback when a particular
remote peer reboots.
To match the callback to the correct remote peer, the NLM service
constructs a cookie that it passes in the request. The NSM service
passes that cookie back to the NLM service when it is notified that
the given remote peer has indeed rebooted.
Currently on Linux, the cookie is the raw 32-bit IPv4 address of the
remote peer. To support IPv6 addresses, which are larger, we could
use all 16 bytes of the cookie to represent a full IPv6 address,
although we still can't represent an IPv6 address with a scope ID in
just 16 bytes.
Instead, to avoid the need for future changes to support additional
address types, we'll use a manufactured value for the cookie, and use
that to find the corresponding nsm_handle struct in the kernel during
the NLMPROC_SM_NOTIFY callback.
This should provide complete support in the kernel's NSM
implementation for IPv6 hosts, while remaining backwards compatible
with older rpc.statd implementations.
Note we also deal with another case where nsm_use_hostnames can change
while there are outstanding notifications, possibly resulting in the
loss of reboot notifications. After this patch, the priv cookie is
always used to lookup rebooted hosts in the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-12 01:56:07 +03:00
2014-07-17 01:04:46 +04:00
ns = ktime_get_ns ( ) ;
2009-03-28 22:55:20 +03:00
put_unaligned ( ns , p ) ;
put_unaligned ( ( unsigned long ) nsm , p + 1 ) ;
2008-12-06 03:03:16 +03:00
}
2008-12-12 01:55:52 +03:00
static struct nsm_handle * nsm_create_handle ( const struct sockaddr * sap ,
const size_t salen ,
const char * hostname ,
const size_t hostname_len )
{
struct nsm_handle * new ;
new = kzalloc ( sizeof ( * new ) + hostname_len + 1 , GFP_KERNEL ) ;
if ( unlikely ( new = = NULL ) )
return NULL ;
2017-11-29 14:15:44 +03:00
refcount_set ( & new - > sm_count , 1 ) ;
2008-12-12 01:55:52 +03:00
new - > sm_name = ( char * ) ( new + 1 ) ;
memcpy ( nsm_addr ( new ) , sap , salen ) ;
new - > sm_addrlen = salen ;
nsm_init_private ( new ) ;
2009-08-09 23:09:39 +04:00
if ( rpc_ntop ( nsm_addr ( new ) , new - > sm_addrbuf ,
sizeof ( new - > sm_addrbuf ) ) = = 0 )
( void ) snprintf ( new - > sm_addrbuf , sizeof ( new - > sm_addrbuf ) ,
" unsupported address family " ) ;
2008-12-12 01:55:52 +03:00
memcpy ( new - > sm_name , hostname , hostname_len ) ;
new - > sm_name [ hostname_len ] = ' \0 ' ;
return new ;
}
2008-12-06 03:02:45 +03:00
/**
2008-12-06 03:04:01 +03:00
* nsm_get_handle - Find or create a cached nsm_handle
2015-09-23 15:49:29 +03:00
* @ net : network namespace
2008-12-06 03:02:45 +03:00
* @ sap : pointer to socket address of handle to find
* @ salen : length of socket address
* @ hostname : pointer to C string containing hostname to find
* @ hostname_len : length of C string
*
2008-12-06 03:04:01 +03:00
* Behavior is modulated by the global nsm_use_hostnames variable .
2008-12-06 03:02:45 +03:00
*
2008-12-06 03:04:01 +03:00
* Returns a cached nsm_handle after bumping its ref count , or
* returns a fresh nsm_handle if a handle that matches @ sap and / or
* @ hostname cannot be found in the handle cache . Returns NULL if
* an error occurs .
2008-12-06 03:02:45 +03:00
*/
2015-09-23 15:49:29 +03:00
struct nsm_handle * nsm_get_handle ( const struct net * net ,
const struct sockaddr * sap ,
2008-12-06 03:04:01 +03:00
const size_t salen , const char * hostname ,
const size_t hostname_len )
2008-12-06 03:02:45 +03:00
{
2008-12-12 01:55:59 +03:00
struct nsm_handle * cached , * new = NULL ;
2015-09-23 15:49:29 +03:00
struct lockd_net * ln = net_generic ( net , lockd_net_id ) ;
2008-12-06 03:02:45 +03:00
if ( hostname & & memchr ( hostname , ' / ' , hostname_len ) ! = NULL ) {
if ( printk_ratelimit ( ) ) {
printk ( KERN_WARNING " Invalid hostname \" %.*s \" "
" in NFS lock request \n " ,
( int ) hostname_len , hostname ) ;
}
return NULL ;
}
retry :
spin_lock ( & nsm_lock ) ;
2008-12-12 01:55:59 +03:00
if ( nsm_use_hostnames & & hostname ! = NULL )
2015-09-23 15:49:29 +03:00
cached = nsm_lookup_hostname ( & ln - > nsm_handles ,
hostname , hostname_len ) ;
2008-12-12 01:55:59 +03:00
else
2015-09-23 15:49:29 +03:00
cached = nsm_lookup_addr ( & ln - > nsm_handles , sap ) ;
2008-12-12 01:55:59 +03:00
if ( cached ! = NULL ) {
2017-11-29 14:15:44 +03:00
refcount_inc ( & cached - > sm_count ) ;
2008-12-12 01:55:59 +03:00
spin_unlock ( & nsm_lock ) ;
kfree ( new ) ;
dprintk ( " lockd: found nsm_handle for %s (%s), "
" cnt %d \n " , cached - > sm_name ,
cached - > sm_addrbuf ,
2017-11-29 14:15:44 +03:00
refcount_read ( & cached - > sm_count ) ) ;
2008-12-12 01:55:59 +03:00
return cached ;
2008-12-06 03:02:45 +03:00
}
2008-12-12 01:55:59 +03:00
if ( new ! = NULL ) {
2015-09-23 15:49:29 +03:00
list_add ( & new - > sm_link , & ln - > nsm_handles ) ;
2008-12-12 01:55:59 +03:00
spin_unlock ( & nsm_lock ) ;
2008-12-06 03:02:53 +03:00
dprintk ( " lockd: created nsm_handle for %s (%s) \n " ,
2008-12-12 01:55:59 +03:00
new - > sm_name , new - > sm_addrbuf ) ;
return new ;
2008-12-06 03:02:45 +03:00
}
2008-12-12 01:55:59 +03:00
2008-12-06 03:02:45 +03:00
spin_unlock ( & nsm_lock ) ;
2008-12-12 01:55:59 +03:00
new = nsm_create_handle ( sap , salen , hostname , hostname_len ) ;
if ( unlikely ( new = = NULL ) )
2008-12-06 03:02:45 +03:00
return NULL ;
goto retry ;
}
2008-12-06 03:03:46 +03:00
/**
* nsm_reboot_lookup - match NLMPROC_SM_NOTIFY arguments to an nsm_handle
2015-09-23 15:49:29 +03:00
* @ net : network namespace
2008-12-06 03:03:46 +03:00
* @ info : pointer to NLMPROC_SM_NOTIFY arguments
*
2010-02-05 23:09:22 +03:00
* Returns a matching nsm_handle if found in the nsm cache . The returned
* nsm_handle ' s reference count is bumped . Otherwise returns NULL if some
* error occurred .
2008-12-06 03:03:46 +03:00
*/
2015-09-23 15:49:29 +03:00
struct nsm_handle * nsm_reboot_lookup ( const struct net * net ,
const struct nlm_reboot * info )
2008-12-06 03:03:46 +03:00
{
struct nsm_handle * cached ;
2015-09-23 15:49:29 +03:00
struct lockd_net * ln = net_generic ( net , lockd_net_id ) ;
2008-12-06 03:03:46 +03:00
spin_lock ( & nsm_lock ) ;
2015-09-23 15:49:29 +03:00
cached = nsm_lookup_priv ( & ln - > nsm_handles , & info - > priv ) ;
2008-12-06 03:03:46 +03:00
if ( unlikely ( cached = = NULL ) ) {
spin_unlock ( & nsm_lock ) ;
dprintk ( " lockd: never saw rebooted peer '%.*s' before \n " ,
info - > len , info - > mon ) ;
return cached ;
}
2017-11-29 14:15:44 +03:00
refcount_inc ( & cached - > sm_count ) ;
2008-12-06 03:03:46 +03:00
spin_unlock ( & nsm_lock ) ;
dprintk ( " lockd: host %s (%s) rebooted, cnt %d \n " ,
cached - > sm_name , cached - > sm_addrbuf ,
2017-11-29 14:15:44 +03:00
refcount_read ( & cached - > sm_count ) ) ;
2008-12-06 03:03:46 +03:00
return cached ;
}
2008-12-06 03:02:45 +03:00
/**
* nsm_release - Release an NSM handle
* @ nsm : pointer to handle to be released
*
*/
void nsm_release ( struct nsm_handle * nsm )
{
2017-11-29 14:15:44 +03:00
if ( refcount_dec_and_lock ( & nsm - > sm_count , & nsm_lock ) ) {
2008-12-06 03:02:45 +03:00
list_del ( & nsm - > sm_link ) ;
spin_unlock ( & nsm_lock ) ;
2008-12-06 03:02:53 +03:00
dprintk ( " lockd: destroyed nsm_handle for %s (%s) \n " ,
nsm - > sm_name , nsm - > sm_addrbuf ) ;
2008-12-06 03:02:45 +03:00
kfree ( nsm ) ;
}
}
2005-04-17 02:20:36 +04:00
/*
* XDR functions for NSM .
2008-03-14 21:26:01 +03:00
*
* See http : //www.opengroup.org/ for details on the Network
* Status Monitor wire protocol .
2005-04-17 02:20:36 +04:00
*/
2010-12-14 17:58:30 +03:00
static void encode_nsm_string ( struct xdr_stream * xdr , const char * string )
2008-03-14 21:25:32 +03:00
{
2008-12-06 03:02:15 +03:00
const u32 len = strlen ( string ) ;
__be32 * p ;
2010-12-14 17:58:30 +03:00
p = xdr_reserve_space ( xdr , 4 + len ) ;
2008-12-06 03:02:15 +03:00
xdr_encode_opaque ( p , string , len ) ;
2008-03-14 21:25:32 +03:00
}
2008-03-14 21:25:39 +03:00
/*
* " mon_name " specifies the host to be monitored .
*/
2010-12-14 17:58:30 +03:00
static void encode_mon_name ( struct xdr_stream * xdr , const struct nsm_args * argp )
2008-03-14 21:25:39 +03:00
{
2010-12-14 17:58:30 +03:00
encode_nsm_string ( xdr , argp - > mon_name ) ;
2008-03-14 21:25:39 +03:00
}
2008-03-14 21:25:46 +03:00
/*
* The " my_id " argument specifies the hostname and RPC procedure
* to be called when the status manager receives notification
2008-12-06 03:02:07 +03:00
* ( via the NLMPROC_SM_NOTIFY call ) that the state of host " mon_name "
2008-03-14 21:25:46 +03:00
* has changed .
*/
2010-12-14 17:58:30 +03:00
static void encode_my_id ( struct xdr_stream * xdr , const struct nsm_args * argp )
2008-03-14 21:25:46 +03:00
{
2008-12-06 03:02:15 +03:00
__be32 * p ;
2012-09-18 13:37:18 +04:00
encode_nsm_string ( xdr , argp - > nodename ) ;
2010-12-14 17:58:30 +03:00
p = xdr_reserve_space ( xdr , 4 + 4 + 4 ) ;
* p + + = cpu_to_be32 ( argp - > prog ) ;
* p + + = cpu_to_be32 ( argp - > vers ) ;
* p = cpu_to_be32 ( argp - > proc ) ;
2008-03-14 21:25:46 +03:00
}
2008-03-14 21:25:53 +03:00
/*
* The " mon_id " argument specifies the non - private arguments
2008-12-06 03:02:07 +03:00
* of an NSMPROC_MON or NSMPROC_UNMON call .
2008-03-14 21:25:53 +03:00
*/
2010-12-14 17:58:30 +03:00
static void encode_mon_id ( struct xdr_stream * xdr , const struct nsm_args * argp )
2008-03-14 21:25:53 +03:00
{
2010-12-14 17:58:30 +03:00
encode_mon_name ( xdr , argp ) ;
encode_my_id ( xdr , argp ) ;
2008-03-14 21:25:53 +03:00
}
2008-03-14 21:26:08 +03:00
/*
* The " priv " argument may contain private information required
2008-12-06 03:02:07 +03:00
* by the NSMPROC_MON call . This information will be supplied in the
* NLMPROC_SM_NOTIFY call .
2008-03-14 21:26:08 +03:00
*/
2010-12-14 17:58:30 +03:00
static void encode_priv ( struct xdr_stream * xdr , const struct nsm_args * argp )
2008-03-14 21:26:08 +03:00
{
2008-12-06 03:02:15 +03:00
__be32 * p ;
p = xdr_reserve_space ( xdr , SM_PRIV_SIZE ) ;
2008-12-06 03:03:24 +03:00
xdr_encode_opaque_fixed ( p , argp - > priv - > data , SM_PRIV_SIZE ) ;
2008-03-14 21:26:08 +03:00
}
2010-12-14 17:59:18 +03:00
static void nsm_xdr_enc_mon ( struct rpc_rqst * req , struct xdr_stream * xdr ,
2017-05-08 10:34:04 +03:00
const void * argp )
2005-04-17 02:20:36 +04:00
{
2010-12-14 17:59:18 +03:00
encode_mon_id ( xdr , argp ) ;
encode_priv ( xdr , argp ) ;
2005-04-17 02:20:36 +04:00
}
2010-12-14 17:59:18 +03:00
static void nsm_xdr_enc_unmon ( struct rpc_rqst * req , struct xdr_stream * xdr ,
2017-05-08 10:34:04 +03:00
const void * argp )
2005-04-17 02:20:36 +04:00
{
2010-12-14 17:59:18 +03:00
encode_mon_id ( xdr , argp ) ;
2005-04-17 02:20:36 +04:00
}
2010-12-14 17:59:29 +03:00
static int nsm_xdr_dec_stat_res ( struct rpc_rqst * rqstp ,
struct xdr_stream * xdr ,
2017-05-08 16:06:20 +03:00
void * data )
2005-04-17 02:20:36 +04:00
{
2017-05-08 16:06:20 +03:00
struct nsm_res * resp = data ;
2010-12-14 17:59:29 +03:00
__be32 * p ;
2008-12-06 03:02:15 +03:00
2010-12-14 17:59:29 +03:00
p = xdr_inline_decode ( xdr , 4 + 4 ) ;
2008-12-06 03:02:15 +03:00
if ( unlikely ( p = = NULL ) )
return - EIO ;
2010-12-14 17:58:30 +03:00
resp - > status = be32_to_cpup ( p + + ) ;
resp - > state = be32_to_cpup ( p ) ;
2008-12-06 03:02:15 +03:00
2010-12-14 17:59:29 +03:00
dprintk ( " lockd: %s status %d state %d \n " ,
__func__ , resp - > status , resp - > state ) ;
2005-04-17 02:20:36 +04:00
return 0 ;
}
2010-12-14 17:59:29 +03:00
static int nsm_xdr_dec_stat ( struct rpc_rqst * rqstp ,
struct xdr_stream * xdr ,
2017-05-08 16:06:20 +03:00
void * data )
2005-04-17 02:20:36 +04:00
{
2017-05-08 16:06:20 +03:00
struct nsm_res * resp = data ;
2010-12-14 17:59:29 +03:00
__be32 * p ;
2008-12-06 03:02:15 +03:00
2010-12-14 17:59:29 +03:00
p = xdr_inline_decode ( xdr , 4 ) ;
2008-12-06 03:02:15 +03:00
if ( unlikely ( p = = NULL ) )
return - EIO ;
2010-12-14 17:58:30 +03:00
resp - > state = be32_to_cpup ( p ) ;
2008-12-06 03:02:15 +03:00
2010-12-14 17:59:29 +03:00
dprintk ( " lockd: %s state %d \n " , __func__ , resp - > state ) ;
2005-04-17 02:20:36 +04:00
return 0 ;
}
# define SM_my_name_sz (1+XDR_QUADLEN(SM_MAXSTRLEN))
2008-03-14 21:26:01 +03:00
# define SM_my_id_sz (SM_my_name_sz+3)
# define SM_mon_name_sz (1+XDR_QUADLEN(SM_MAXSTRLEN))
# define SM_mon_id_sz (SM_mon_name_sz+SM_my_id_sz)
2008-03-14 21:26:08 +03:00
# define SM_priv_sz (XDR_QUADLEN(SM_PRIV_SIZE))
# define SM_mon_sz (SM_mon_id_sz+SM_priv_sz)
2005-04-17 02:20:36 +04:00
# define SM_monres_sz 2
# define SM_unmonres_sz 1
2017-05-12 16:36:49 +03:00
static const struct rpc_procinfo nsm_procedures [ ] = {
2008-12-06 03:02:07 +03:00
[ NSMPROC_MON ] = {
. p_proc = NSMPROC_MON ,
2017-05-08 10:34:04 +03:00
. p_encode = nsm_xdr_enc_mon ,
2017-05-08 16:06:20 +03:00
. p_decode = nsm_xdr_dec_stat_res ,
2007-03-30 00:47:53 +04:00
. p_arglen = SM_mon_sz ,
. p_replen = SM_monres_sz ,
2008-12-06 03:02:07 +03:00
. p_statidx = NSMPROC_MON ,
2006-03-20 21:44:22 +03:00
. p_name = " MONITOR " ,
2005-04-17 02:20:36 +04:00
} ,
2008-12-06 03:02:07 +03:00
[ NSMPROC_UNMON ] = {
. p_proc = NSMPROC_UNMON ,
2017-05-08 10:34:04 +03:00
. p_encode = nsm_xdr_enc_unmon ,
2017-05-08 16:06:20 +03:00
. p_decode = nsm_xdr_dec_stat ,
2007-03-30 00:47:53 +04:00
. p_arglen = SM_mon_id_sz ,
. p_replen = SM_unmonres_sz ,
2008-12-06 03:02:07 +03:00
. p_statidx = NSMPROC_UNMON ,
2006-03-20 21:44:22 +03:00
. p_name = " UNMONITOR " ,
2005-04-17 02:20:36 +04:00
} ,
} ;
2017-05-09 00:27:10 +03:00
static unsigned int nsm_version1_counts [ ARRAY_SIZE ( nsm_procedures ) ] ;
2012-01-20 22:53:56 +04:00
static const struct rpc_version nsm_version1 = {
2017-05-09 00:32:18 +03:00
. number = 1 ,
. nrprocs = ARRAY_SIZE ( nsm_procedures ) ,
2017-05-09 00:27:10 +03:00
. procs = nsm_procedures ,
. counts = nsm_version1_counts ,
2005-04-17 02:20:36 +04:00
} ;
2012-01-20 22:53:56 +04:00
static const struct rpc_version * nsm_version [ ] = {
2005-04-17 02:20:36 +04:00
[ 1 ] = & nsm_version1 ,
} ;
static struct rpc_stat nsm_stats ;
2012-01-20 22:53:56 +04:00
static const struct rpc_program nsm_program = {
2017-05-09 00:32:18 +03:00
. name = " statd " ,
. number = NSM_PROGRAM ,
. nrvers = ARRAY_SIZE ( nsm_version ) ,
. version = nsm_version ,
. stats = & nsm_stats
2005-04-17 02:20:36 +04:00
} ;