iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/aspeed_g5_defconfig

311 lines
7.8 KiB
Plaintext
Raw Normal View History

arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_KERNEL_XZ=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
ARM: config: aspeed: Regenerate defconfigs A make defconfig && make savedefconfig was performed for each configuration. Most changes are due to options moving around, except for the following which are due to changing defaults: - SECCOMP is enabled by default as of commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") in v5.9 - The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL are enabled by default when the aspeed platform is enabled, as of commit 592693a1f881 ("soc: aspeed: Improve kconfig") in v5.9 - The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8 - I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about v5.8. It was in the config as it is required bt the PCA I2C muxes that enabled it Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19 16:22:03 +09:30
CONFIG_BPF_SYSCALL=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_CGROUPS=y
ARM: config: aspeed: Enable namespaces Used by OpenBMC due to systemd. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-18 16:51:27 +10:00
CONFIG_NAMESPACES=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_UID16 is not set
# CONFIG_SYSFS_SYSCALL is not set
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_PERF_EVENTS=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G5=y
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_MACH_ASPEED_G6=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
# CONFIG_CACHE_L2X0 is not set
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_SMP=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_VMSPLIT_2G=y
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_NR_CPUS=2
CONFIG_HIGHMEM=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_UACCESS_WITH_MEMCPY=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
# CONFIG_ATAGS is not set
CONFIG_KEXEC=y
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
ARM: configs: aspeed: Refresh defconfigs A noop change to git rid of cruft. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-23 12:49:16 +09:30
CONFIG_JUMP_LABEL=y
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
# CONFIG_SWAP is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_COMPAT_BRK is not set
ARM: configs: aspeed: Refresh defconfigs A noop change to git rid of cruft. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-23 12:49:16 +09:30
# CONFIG_COMPACTION is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_NET=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_UNIX=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_UNIX_DIAG=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_INET=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_IP_MULTICAST=y
ARM: configs: aspeed: Enable commonly used network functionality This addresses some assumptions made by systemd about having multiple routing table support in the kernel. systemd-networkd will try and provision mutliple routing tables + policies and will silently break neighbor advertisement responses due to policy configurations on a single table. It also adds support for SLAAC based router settings and faster duplicate address detection. Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-01-16 12:54:59 +11:00
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_SYN_COOKIES=y
# CONFIG_INET_DIAG is not set
ARM: configs: aspeed: Enable commonly used network functionality This addresses some assumptions made by systemd about having multiple routing table support in the kernel. systemd-networkd will try and provision mutliple routing tables + policies and will silently break neighbor advertisement responses due to policy configurations on a single table. It also adds support for SLAAC based router settings and faster duplicate address detection. Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-01-16 12:54:59 +11:00
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
ARM: configs: aspeed: Disable IPV6 SIT device No one is using this device on OpenBMC systems, and there is no code to manage it in phosphor-networkd (the default OpenBMC userspace) as of March 2021: > [...] if you don't add IPv6 addresses to the sit interface > it doesn't do anything. The defacto way to do that on an interface in > OpenBMC is to have it managed by phosphor-networkd. On top of this, to > support sit you would need a way to configure the local / remote IPv4 > addresses used to back it. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:41:12 +10:30
# CONFIG_IPV6_SIT is not set
ARM: configs: aspeed: Enable commonly used network functionality This addresses some assumptions made by systemd about having multiple routing table support in the kernel. systemd-networkd will try and provision mutliple routing tables + policies and will silently break neighbor advertisement responses due to policy configurations on a single table. It also adds support for SLAAC based router settings and faster duplicate address detection. Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-01-16 12:54:59 +11:00
CONFIG_IPV6_MULTIPLE_TABLES=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_VLAN_8021Q=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_NET_NCSI=y
ARM: configs: aspeed_g5: Enable MCTP stack Enable the MCTP core along with the serial and i2c drivers. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-03-18 11:27:36 +10:30
CONFIG_MCTP=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_WIRELESS is not set
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_FIRMWARE_MEMMAP=y
ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-03-01 15:26:43 +01:00
CONFIG_MTD=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONED_MASTER=y
ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-03-01 15:26:43 +01:00
CONFIG_MTD_SPI_NOR=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_BLK_DEV_LOOP=y
ARM: config: aspeed: Enable Network Block Device NBD is used for remote media support in the OpenBMC Web UI. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:53:09 +10:30
CONFIG_BLK_DEV_NBD=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_EEPROM_AT24=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_EEPROM_AT25=y
ARM: configs: aspeed: Add support for USB flash drives Add support to detect USB flash drives and create the /dev/sd* devices. Also add support for vfat to support USB drives formatted as FAT32. This support will be used to enable firmware updates via USB flash drives where the firmware image is stored in the USB drive and it's plugged into the BMC USB port. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-12 20:29:31 +00:00
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_NETDEVICES=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_NETCONSOLE=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_AMAZON is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_AQUANTIA is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_CIRRUS is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_CORTINA is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_FTGMAC100=y
# CONFIG_NET_VENDOR_HISILICON is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_HUAWEI is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_MELLANOX is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_MICREL is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_MICROSEMI is not set
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
# CONFIG_NET_VENDOR_NI is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_SOCIONEXT is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NET_VENDOR_SYNOPSYS is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_BROADCOM_PHY=y
CONFIG_REALTEK_PHY=y
ARM: configs: aspeed_g5: Enable MCTP stack Enable the MCTP core along with the serial and i2c drivers. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-03-18 11:27:36 +10:30
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_USB_NET_DRIVERS is not set
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
# CONFIG_WLAN is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_INPUT_MOUSE is not set
ARM: config: aspeed_g5: Enable IBM OP Panel driver The IBM op-panel driver requires i2c slave mode. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 09:54:16 +09:30
CONFIG_INPUT_MISC=y
CONFIG_INPUT_IBM_PANEL=y
ARM: config: aspeed: Enable KCS adapter for raw SerIO Raw SerIO is used by the OpenBMC debug-trigger application to take signals from the host that applications are unresponsive on the BMC. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210819065203.2620911-3-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19 16:22:01 +09:30
CONFIG_SERIO_RAW=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
ARM: config: aspeed: Add I2C, VUART, LPC Snoop These drivers have been recently upstreamed, so add them to the defconfigs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-08-23 15:57:34 +09:30
CONFIG_SERIAL_8250_ASPEED_VUART=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_SERIAL_8250_SHARE_IRQ=y
ARM: config: aspeed-g5: Enable 8250_DW quirks This driver option is used by the AST2600 A0 boards to work around a hardware issue. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:39:26 +10:30
CONFIG_SERIAL_8250_DW=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_SERIAL_OF_PLATFORM=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_ASPEED_KCS_IPMI_BMC=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
ARM: config: aspeed: Enable KCS adapter for raw SerIO Raw SerIO is used by the OpenBMC debug-trigger application to take signals from the host that applications are unresponsive on the BMC. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210819065203.2620911-3-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19 16:22:01 +09:30
CONFIG_IPMI_KCS_BMC_SERIO=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_ASPEED_BT_IPMI_BMC=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_HW_RANDOM_TIMERIOMEM=y
ARM: configs: aspeed_g5: Add TPM TIS I2C driver It is used by the rainier and other p10bmc machines. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-11 17:15:35 +10:30
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
ARM: config: aspeed-g5: Enable I2C GPIO mux driver Used by rainier and q71l. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24 16:31:15 +09:30
CONFIG_I2C_MUX_GPIO=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
ARM: config: aspeed: Add I2C, VUART, LPC Snoop These drivers have been recently upstreamed, so add them to the defconfigs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-08-23 15:57:34 +09:30
CONFIG_I2C_ASPEED=y
ARM: config: aspeed: Enable new FSI drivers This turns on the FSI-attached I2C bus driver, and the ColdFire offloaded FSI master which are new to 4.19. Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-26 13:25:56 +09:30
CONFIG_I2C_FSI=y
ARM: config: aspeed_g5: Enable IBM OP Panel driver The IBM op-panel driver requires i2c slave mode. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 09:54:16 +09:30
CONFIG_I2C_SLAVE=y
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_SPI=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_SPI_ASPEED_SMC=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SPI_FSI=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_GPIOLIB=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_GPIO_SYSFS=y
ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-01-05 15:55:42 +11:00
CONFIG_GPIO_ASPEED=y
ARM: config: aspeed-g5: Add SGPIO and FSI drivers These are recently merged drivers for ASPEED systems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:42:18 +10:30
CONFIG_GPIO_ASPEED_SGPIO=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_W1=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_SLAVE_THERM=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SENSORS_ADT7475=y
ARM: configs: aspeed: Add new drivers - LPC Host Controller - Pulse Width Modulation and Tachometer - Analog to Digital converter These three new drivers for the Aspeed SoCs will appear in 4.12. This defconfig is based on next-20170406. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-07 14:32:59 +09:30
CONFIG_SENSORS_ASPEED=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_NCT7904=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SENSORS_OCC_P9_SBE=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_PMBUS=y
CONFIG_SENSORS_ADM1275=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_IR35221=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_ISL68137=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_SENSORS_LM25066=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SENSORS_MAX31785=y
ARM: configs: aspeed_g5: Add mp5023 driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-13 16:02:47 +10:30
CONFIG_SENSORS_MP5023=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_SENSORS_UCD9000=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SENSORS_UCD9200=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SENSORS_SBTSI=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_SENSORS_TMP421=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SENSORS_W83773G=y
CONFIG_WATCHDOG_SYSFS=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_MEDIA_SUPPORT=y
ARM: config: aspeed: Fix selection of media drivers In the 5.7 merge window the media kconfig was restructued. For most platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps unwanted drivers disabled. The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb27665). In that case the filter is set to =n, causing a bunch of DVB tuner drivers (MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew out the build time for the Aspeed defconfigs. Enabling the filter means the Aspeed config also needs to set CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED driver enabled. Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") Fixes: b0cd4fb27665 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering") Signed-off-by: Joel Stanley <joel@jms.id.au> Cc: stable@vger.kernel.org CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-26 16:49:16 +09:30
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ASPEED=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_DRM=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_DRM_ASPEED_GFX=y
ARM: configs: aspeed_g5: Reneable DRM_FBDEV_EMULATION DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM was enabled. In commit f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") the select was replaced with a depends on FB, disabling DRM_FBDEV_EMULATION for configurations that had it enabled. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14 18:04:42 +09:30
CONFIG_FB=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
ARM: configs: aspeed: Add support for USB flash drives Add support to detect USB flash drives and create the /dev/sd* devices. Also add support for vfat to support USB drives formatted as FAT32. This support will be used to enable firmware updates via USB flash drives where the firmware image is stored in the USB drive and it's plugged into the BMC USB port. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-12 20:29:31 +00:00
CONFIG_USB_STORAGE=y
ARM: configs: aspeed_g5: Add PL2303 USB serial driver Used by P10 machines. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-31 16:40:11 +10:30
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_PL2303=y
arm: configs: Add USB gadget to Aspeed G5 defconfig Now that the vhub driver is upstream and the device-trees updated, let's enable this by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-06-29 13:51:05 +10:00
CONFIG_USB_GADGET=y
CONFIG_USB_ASPEED_VHUB=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_HID=y
ARM: configs: aspeed_g5: Enable AST2600 CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:30 +09:30
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ASPEED=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_GPIO=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_EDAC=y
CONFIG_EDAC_ASPEED=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_RV8803=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_RTC_DRV_ASPEED=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_VIRTIO_MENU is not set
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
# CONFIG_IOMMU_SUPPORT is not set
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_IIO=y
ARM: configs: aspeed: Add new drivers - LPC Host Controller - Pulse Width Modulation and Tachometer - Analog to Digital converter These three new drivers for the Aspeed SoCs will appear in 4.12. This defconfig is based on next-20170406. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-07 14:32:59 +09:30
CONFIG_ASPEED_ADC=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_MAX1363=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_SI7020=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_BMP280=y
ARM: configs: aspeed: Enable commonly used drivers These devices are used by BMC platforms. Enable them so mainline defconfigs can be used to test. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:44:11 +10:30
CONFIG_DPS310=y
ARM: configs: aspeed: Add new drivers This enables a handful of new drivers that have recently landed: - Video caputre, for doing BMC virtual keyboard-video-mouse - DRM driver for the BMC's own graphics device - Error detection and correction - P2A control, a BMC feature for moving data between the host and BMC - RTC driver Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:07:41 +09:30
CONFIG_RAS=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_FSI=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
ARM: config: aspeed: Enable new FSI drivers This turns on the FSI-attached I2C bus driver, and the ColdFire offloaded FSI master which are new to 4.19. Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-26 13:25:56 +09:30
CONFIG_FSI_MASTER_AST_CF=y
ARM: config: aspeed-g5: Add SGPIO and FSI drivers These are recently merged drivers for ASPEED systems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:42:18 +10:30
CONFIG_FSI_MASTER_ASPEED=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
ARM: config: aspeed-g5: Add SGPIO and FSI drivers These are recently merged drivers for ASPEED systems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:42:18 +10:30
CONFIG_FSI_OCC=y
ARM: config: aspeed_g5: Enable PECI Intel systems use PECI, so provide build coverage for the driver stack. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-18 16:56:24 +10:00
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
ARM: config: aspeed: Add DEBUG_FS and EXT4 DEBUG_FS was lost way back in v5.5, and EXT4 is used by ast2600 systems that have MMC. Link: https://lore.kernel.org/r/20210610045338.99847-1-joel@jms.id.au Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210603040906.125109-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-10 14:23:38 +09:30
CONFIG_EXT4_FS=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_FANOTIFY=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_OVERLAY_FS=y
ARM: configs: aspeed: Add support for USB flash drives Add support to detect USB flash drives and create the /dev/sd* devices. Also add support for vfat to support USB drives formatted as FAT32. This support will be used to enable firmware updates via USB flash drives where the firmware image is stored in the USB drive and it's plugged into the BMC USB port. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-12 20:29:31 +00:00
CONFIG_VFAT_FS=y
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
ARM: configs: aspeed: Update configs for BMC systems Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-06 11:43:09 +09:30
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_UBIFS_FS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XZ=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SQUASHFS_ZSTD=y
ARM: configs: aspeed: Enable pstore and lockup detectors These are enabled by OpenBMC platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:50:51 +10:30
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_FTRACE=y
CONFIG_PSTORE_RAM=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
# CONFIG_NETWORK_FILESYSTEMS is not set
ARM: configs: aspeed: Add support for USB flash drives Add support to detect USB flash drives and create the /dev/sd* devices. Also add support for vfat to support USB drives formatted as FAT32. This support will be used to enable firmware updates via USB flash drives where the firmware image is stored in the USB drive and it's plugged into the BMC USB port. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-12 20:29:31 +00:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: configs: aspeed_g5: Add TPM TIS I2C driver It is used by the rainier and other p10bmc machines. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-11 17:15:35 +10:30
# CONFIG_SECURITYFS is not set
ARM: configs: aspeed: Refresh defconfigs A noop change to git rid of cruft. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-23 12:49:16 +09:30
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_SPARC is not set
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME" The patch that this was preparing for made it into neither v4.7 nor v4.8, so we should back this out as well to avoid the opposite warning: arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME Sorry for not catching this earlier. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0ef659a30055 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME") Cc: stable@vger.kernel.org # v4.7
2016-08-03 11:07:44 +02:00
CONFIG_PRINTK_TIME=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_DYNAMIC_DEBUG=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_DEBUG_INFO_DWARF4=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_DEBUG_INFO_REDUCED=y
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_GDB_SCRIPTS=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_STRIP_ASM_SYMS=y
ARM: config: aspeed: Add DEBUG_FS and EXT4 DEBUG_FS was lost way back in v5.5, and EXT4 is used by ast2600 systems that have MMC. Link: https://lore.kernel.org/r/20210610045338.99847-1-joel@jms.id.au Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210603040906.125109-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-10 14:23:38 +09:30
CONFIG_DEBUG_FS=y
ARM: config: aspeed: Regenerate defconfigs A make defconfig && make savedefconfig was performed for each configuration. Most changes are due to options moving around, except for the following which are due to changing defaults: - SECCOMP is enabled by default as of commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") in v5.9 - The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL are enabled by default when the aspeed platform is enabled, as of commit 592693a1f881 ("soc: aspeed: Improve kconfig") in v5.9 - The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8 - I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about v5.8. It was in the config as it is required bt the PCA I2C muxes that enabled it Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19 16:22:03 +09:30
CONFIG_DEBUG_WX=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=-1
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_SOFTLOCKUP_DETECTOR=y
ARM: configs: aspeed: Enable pstore and lockup detectors These are enabled by OpenBMC platforms. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:50:51 +10:30
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_WQ_WATCHDOG=y
# CONFIG_SCHED_DEBUG is not set
ARM: config: aspeed: Update defconfig - Enable new support: hardware random number generator FSI and client drivers DRM GFX driver - Disable unwanted features: ARM_APPENDED_DTB ARM_ATAG_DTB_COMPAT BLK_DEV_RAM - Sync G4 and G5 with OpenBMC configurations BLK_DEV_LOOP, for updater mechanic CRYPTO_HMAC, for libsdbus features CRYPTO_SHA256 CRYPTO_USER_API_HASH - Enable security related features: SLAB_FREELIST_RANDOM STRICT_KERNEL_RW CC_STACKPROTECTOR_STRONG HARDENED_USERCOPY FORTIFY_SOURCE - Increase kernel log buffer size Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:00 +09:30
CONFIG_FUNCTION_TRACER=y
arm/configs: Add Aspeed defconfig Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-13 16:29:14 +09:30
CONFIG_DEBUG_USER=y
ARM: config: aspeed: Regenerate defconfigs A make defconfig && make savedefconfig was performed for each configuration. Most changes are due to options moving around, except for the following which are due to changing defaults: - SECCOMP is enabled by default as of commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") in v5.9 - The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL are enabled by default when the aspeed platform is enabled, as of commit 592693a1f881 ("soc: aspeed: Improve kconfig") in v5.9 - The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8 - I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about v5.8. It was in the config as it is required bt the PCA I2C muxes that enabled it Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19 16:22:03 +09:30
# CONFIG_RUNTIME_TESTING_MENU is not set
Reference in New Issue Copy Permalink