iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
216e9d3e8b
linux/arch/arm/mach-vexpress/Kconfig

86 lines
2.6 KiB
Plaintext
Raw Normal View History

ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
ARM: vexpress: Start using new Versatile Express infrastructure This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-10-09 15:56:36 +04:00
select ARCH_REQUIRE_GPIOLIB
ARM: vexpress: add big endian support Add support for the versatile express systems to boot big-endian. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-05-29 00:34:50 +04:00
select ARCH_SUPPORTS_BIG_ENDIAN
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
select ARM_AMBA
ARM: Add Versatile Express CA9x4 processor support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-28 20:26:25 +03:00
select ARM_GIC
KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform The Cortex A5 now contains bindings for the global timer driver. Ensure that the driver is built with a vexpress platform. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-14 14:18:22 +04:00
select ARM_GLOBAL_TIMER
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
select ARM_TIMER_SP804
ARM: vexpress: Start using new Versatile Express infrastructure This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-10-09 15:56:36 +04:00
select COMMON_CLK_VERSATILE
ARM: Push selects for TWD/SCU into machine entries The TWD and SCU configs are selected by default as long as MSM_SCORPIONMP is false and/or MCT is false. Implementing the logic this way certainly saves lines in the Kconfig but it precludes those machines which select MSM_SCORPIONMP or MCT from participating in the single zImage effort because when those machines are combined with other SMP capable machines the TWD and SCU are no longer selected by default. Push the select out to the machine entries so that we can compile these machines together and still select the appropriate configs. Cc: Barry Song <baohua.song@csr.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Simon Horman <horms@verge.net.au> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-28 03:28:14 +04:00
select HAVE_ARM_SCU if SMP
ARM: smp_twd: Divorce smp_twd from local timer API Separate the smp_twd timers from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-16 04:02:20 +04:00
select HAVE_ARM_TWD if SMP
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
select HAVE_PATA_PLATFORM
select ICST
Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08 02:39:19 +04:00
select NO_IOPORT_MAP
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
select POWER_RESET
select POWER_RESET_VEXPRESS
select POWER_SUPPLY
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
select REGULATOR_FIXED_VOLTAGE if REGULATOR
ARM: vexpress: Start using new Versatile Express infrastructure This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-10-09 15:56:36 +04:00
select VEXPRESS_CONFIG
ARM: vexpress: refine dependencies for new code The versatile express changes for 3.16 introduced a number of build regressions for randconfig kernels by not tracking dependencies between the components right. This patch tries to rectify that: * the mach-vexpress code cannot link without the syscfg driver, which in turn needs MFD_VEXPRESS_SYSREG * various drivers call devm_regmap_init_vexpress_config(), which has to be exported so it can be used by loadable modules * the configuration bus uses OF DT helper functions that are not available to platforms disable CONFIG_OF * The sysreg driver exports GPIOs through gpiolib, which can be disabled on some platforms. * The clocksource code cannot be built on platforms that don't use modern timekeeping but rely on gettimeoffset. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-26 19:25:22 +04:00
select VEXPRESS_SYSCFG
select MFD_VEXPRESS_SYSREG
ARM: vexpress: Add Device Tree support This patch adds generic Versatile Express DT machine description, Device Tree description for the motherboard and documentation for the bindings. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-23 17:04:51 +04:00
help
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
for example:
- CoreTile Express A5x2 (V2P-CA5s)
- CoreTile Express A9x4 (V2P-CA9)
- CoreTile Express A15x2 (V2P-CA15)
- LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
(Soft Macrocell Models)
- Versatile Express RTSMs (Models)
You must boot using a Flattened Device Tree in order to use these
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
ARM: vexpress: convert to multi-platform Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-06 22:43:04 +04:00
menu "Versatile Express platform type"
depends on ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds"
default y
select ARM_ERRATA_720789
select PL310_ERRATA_753970 if CACHE_PL310
help
Provides common dependencies for Versatile Express platforms
based on Cortex-A5 and Cortex-A9 processors. In order to
build a working kernel, you must also enable relevant core
tile support or Flattened Device Tree based support options.
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
ARM: Add Versatile Express CA9x4 processor support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-28 20:26:25 +03:00
ARM: vexpress: introduce DCSCB support This adds basic CPU and cluster reset controls on RTSM for the A15x4-A7x4 model configuration using the Dual Cluster System Configuration Block (DCSCB). The cache coherency interconnect (CCI) is not handled yet. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-05-03 04:56:52 +04:00
config ARCH_VEXPRESS_DCSCB
bool "Dual Cluster System Control Block (DCSCB) support"
depends on MCPM
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI Add the required code to properly handle race free platform coherency exit to the DCSCB power down method. The power_up_setup callback is used to enable the CCI interface for the cluster being brought up. This must be done in assembly before the kernel environment is entered. Thanks to Achin Gupta and Nicolas Pitre for their help and contributions. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-07-17 17:25:44 +04:00
select ARM_CCI
ARM: vexpress: introduce DCSCB support This adds basic CPU and cluster reset controls on RTSM for the A15x4-A7x4 model configuration using the Dual Cluster System Configuration Block (DCSCB). The cache coherency interconnect (CCI) is not handled yet. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-05-03 04:56:52 +04:00
help
Support for the Dual Cluster System Configuration Block (DCSCB).
This is needed to provide CPU and cluster power management
on RTSM implementing big.LITTLE.
ARM: vexpress/TC2: add support for CPU DVFS SPC(Serial Power Controller) on TC2 also controls the CPU performance operating points which is essential to provide CPU DVFS. The M3 microcontroller provides two sets of eight performance values, one set for each cluster (CA15 or CA7). Each of this value contains the frequency(kHz) and voltage(mV) at that performance level. It expects these performance level to be passed through the SPC PERF_LVL registers. This patch adds support to populate these performance levels from M3, build the mapping to CPU OPPs at the boot and then use it to get and set the CPU performance level runtime. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <Pawel.Moll@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-29 16:18:37 +04:00
config ARCH_VEXPRESS_SPC
bool "Versatile Express Serial Power Controller (SPC)"
select ARCH_HAS_OPP
select PM_OPP
help
The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
block called Serial Power Controller (SPC) that provides the interface
between the dual cluster test-chip and the M3 microcontroller that
carries out power management.
ARM: vexpress/TC2: basic PM support This is the MCPM backend for the Virtual Express A15x2 A7x3 CoreTile aka TC2. This provides cluster management for SMP secondary boot and CPU hotplug. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [PM: made it drive SCC registers directly and provide base for SPC] Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-08-06 22:10:08 +04:00
config ARCH_VEXPRESS_TC2_PM
bool "Versatile Express TC2 power management"
depends on MCPM
select ARM_CCI
ARM: vexpress/TC2: add support for CPU DVFS SPC(Serial Power Controller) on TC2 also controls the CPU performance operating points which is essential to provide CPU DVFS. The M3 microcontroller provides two sets of eight performance values, one set for each cluster (CA15 or CA7). Each of this value contains the frequency(kHz) and voltage(mV) at that performance level. It expects these performance level to be passed through the SPC PERF_LVL registers. This patch adds support to populate these performance levels from M3, build the mapping to CPU OPPs at the boot and then use it to get and set the CPU performance level runtime. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <Pawel.Moll@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-29 16:18:37 +04:00
select ARCH_VEXPRESS_SPC
ARM: vexpress/TC2: basic PM support This is the MCPM backend for the Virtual Express A15x2 A7x3 CoreTile aka TC2. This provides cluster management for SMP secondary boot and CPU hotplug. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [PM: made it drive SCC registers directly and provide base for SPC] Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-08-06 22:10:08 +04:00
help
Support for CPU and cluster power management on Versatile Express
with a TC2 (A15x2 A7x3) big.LITTLE core tile.
ARM: Add Versatile Express support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 00:44:53 +03:00
endmenu
Reference in New Issue Copy Permalink