2019-05-27 09:55:05 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
2005-04-17 02:20:36 +04:00
/* Helpers for initial module or kernel cmdline parsing
Copyright ( C ) 2001 Rusty Russell .
*/
# include <linux/kernel.h>
# include <linux/string.h>
# include <linux/errno.h>
# include <linux/module.h>
2014-10-14 02:55:44 +04:00
# include <linux/moduleparam.h>
2005-04-17 02:20:36 +04:00
# include <linux/device.h>
# include <linux/err.h>
2005-10-31 02:03:48 +03:00
# include <linux/slab.h>
2009-07-06 19:11:22 +04:00
# include <linux/ctype.h>
2019-08-20 03:17:55 +03:00
# include <linux/security.h>
2005-04-17 02:20:36 +04:00
2015-06-26 00:14:38 +03:00
# ifdef CONFIG_SYSFS
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
/* Protects all built-in parameters, modules use their own param_lock */
2010-08-12 09:04:19 +04:00
static DEFINE_MUTEX ( param_lock ) ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
/* Use the module's mutex, or if built-in use the built-in mutex */
2015-06-26 06:19:19 +03:00
# ifdef CONFIG_MODULES
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
# define KPARAM_MUTEX(mod) ((mod) ? &(mod)->param_lock : ¶m_lock)
2015-06-26 06:19:19 +03:00
# else
# define KPARAM_MUTEX(mod) (¶m_lock)
# endif
2015-06-26 00:14:38 +03:00
static inline void check_kparam_locked ( struct module * mod )
{
BUG_ON ( ! mutex_is_locked ( KPARAM_MUTEX ( mod ) ) ) ;
}
# else
static inline void check_kparam_locked ( struct module * mod )
{
}
# endif /* !CONFIG_SYSFS */
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
2010-08-12 09:04:18 +04:00
/* This just allows us to keep track of which parameters are kmalloced. */
struct kmalloced_param {
struct list_head list ;
char val [ ] ;
} ;
static LIST_HEAD ( kmalloced_params ) ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
static DEFINE_SPINLOCK ( kmalloced_params_lock ) ;
2010-08-12 09:04:18 +04:00
static void * kmalloc_parameter ( unsigned int size )
{
struct kmalloced_param * p ;
p = kmalloc ( sizeof ( * p ) + size , GFP_KERNEL ) ;
if ( ! p )
return NULL ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
spin_lock ( & kmalloced_params_lock ) ;
2010-08-12 09:04:18 +04:00
list_add ( & p - > list , & kmalloced_params ) ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
spin_unlock ( & kmalloced_params_lock ) ;
2010-08-12 09:04:18 +04:00
return p - > val ;
}
/* Does nothing if parameter wasn't kmalloced above. */
static void maybe_kfree_parameter ( void * param )
{
struct kmalloced_param * p ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
spin_lock ( & kmalloced_params_lock ) ;
2010-08-12 09:04:18 +04:00
list_for_each_entry ( p , & kmalloced_params , list ) {
if ( p - > val = = param ) {
list_del ( & p - > list ) ;
kfree ( p ) ;
break ;
}
}
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
spin_unlock ( & kmalloced_params_lock ) ;
2010-08-12 09:04:18 +04:00
}
2011-10-10 02:03:37 +04:00
static char dash2underscore ( char c )
2005-04-17 02:20:36 +04:00
{
if ( c = = ' - ' )
return ' _ ' ;
return c ;
}
2011-10-10 02:03:37 +04:00
bool parameqn ( const char * a , const char * b , size_t n )
2005-04-17 02:20:36 +04:00
{
2011-10-10 02:03:37 +04:00
size_t i ;
for ( i = 0 ; i < n ; i + + ) {
if ( dash2underscore ( a [ i ] ) ! = dash2underscore ( b [ i ] ) )
return false ;
}
return true ;
}
bool parameq ( const char * a , const char * b )
{
return parameqn ( a , b , strlen ( a ) + 1 ) ;
2005-04-17 02:20:36 +04:00
}
2019-08-20 03:17:55 +03:00
static bool param_check_unsafe ( const struct kernel_param * kp )
2014-08-27 00:55:23 +04:00
{
2019-08-20 03:17:55 +03:00
if ( kp - > flags & KERNEL_PARAM_FL_HWPARAM & &
security_locked_down ( LOCKDOWN_MODULE_PARAMETERS ) )
return false ;
2014-08-27 00:55:23 +04:00
if ( kp - > flags & KERNEL_PARAM_FL_UNSAFE ) {
2018-04-11 02:35:18 +03:00
pr_notice ( " Setting dangerous option %s - tainting kernel \n " ,
kp - > name ) ;
2014-08-27 00:55:23 +04:00
add_taint ( TAINT_USER , LOCKDEP_STILL_OK ) ;
}
2019-08-20 03:17:55 +03:00
return true ;
2014-08-27 00:55:23 +04:00
}
2005-04-17 02:20:36 +04:00
static int parse_one ( char * param ,
char * val ,
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
const char * doing ,
2010-08-12 09:04:18 +04:00
const struct kernel_param * params ,
2005-04-17 02:20:36 +04:00
unsigned num_params ,
2012-03-26 06:20:51 +04:00
s16 min_level ,
s16 max_level ,
module: add extra argument for parse_params() callback
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 02:20:03 +03:00
void * arg ,
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
int ( * handle_unknown ) ( char * param , char * val ,
module: add extra argument for parse_params() callback
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 02:20:03 +03:00
const char * doing , void * arg ) )
2005-04-17 02:20:36 +04:00
{
unsigned int i ;
2010-08-12 09:04:19 +04:00
int err ;
2005-04-17 02:20:36 +04:00
/* Find parameter */
for ( i = 0 ; i < num_params ; i + + ) {
if ( parameq ( param , params [ i ] . name ) ) {
2012-03-26 06:20:51 +04:00
if ( params [ i ] . level < min_level
| | params [ i ] . level > max_level )
return 0 ;
2011-03-31 05:57:33 +04:00
/* No one handled NULL, so do it here. */
2013-08-20 10:03:19 +04:00
if ( ! val & &
2014-08-27 00:51:23 +04:00
! ( params [ i ] . ops - > flags & KERNEL_PARAM_OPS_FL_NOARG ) )
2010-08-12 09:04:10 +04:00
return - EINVAL ;
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
pr_debug ( " handling %s with %p \n " , param ,
params [ i ] . ops - > set ) ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_lock ( params [ i ] . mod ) ;
2019-08-20 03:17:55 +03:00
if ( param_check_unsafe ( & params [ i ] ) )
err = params [ i ] . ops - > set ( val , & params [ i ] ) ;
else
err = - EPERM ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_unlock ( params [ i ] . mod ) ;
2010-08-12 09:04:19 +04:00
return err ;
2005-04-17 02:20:36 +04:00
}
}
if ( handle_unknown ) {
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
pr_debug ( " doing %s: %s='%s' \n " , doing , param , val ) ;
module: add extra argument for parse_params() callback
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 02:20:03 +03:00
return handle_unknown ( param , val , doing , arg ) ;
2005-04-17 02:20:36 +04:00
}
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
pr_debug ( " Unknown argument '%s' \n " , param ) ;
2005-04-17 02:20:36 +04:00
return - ENOENT ;
}
/* Args looks like "foo=bar,bar2 baz=fuz wiz". */
2014-04-28 06:04:33 +04:00
char * parse_args ( const char * doing ,
char * args ,
const struct kernel_param * params ,
unsigned num ,
s16 min_level ,
s16 max_level ,
module: add extra argument for parse_params() callback
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 02:20:03 +03:00
void * arg ,
int ( * unknown ) ( char * param , char * val ,
const char * doing , void * arg ) )
2005-04-17 02:20:36 +04:00
{
2015-08-26 03:12:34 +03:00
char * param , * val , * err = NULL ;
2005-04-17 02:20:36 +04:00
2005-09-28 08:45:34 +04:00
/* Chew leading spaces */
2009-12-15 05:01:06 +03:00
args = skip_spaces ( args ) ;
2005-09-28 08:45:34 +04:00
2012-05-03 21:57:37 +04:00
if ( * args )
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
pr_debug ( " doing %s, parsing ARGS: '%s' \n " , doing , args ) ;
2005-04-17 02:20:36 +04:00
while ( * args ) {
int ret ;
2007-01-06 03:36:20 +03:00
int irq_was_disabled ;
2005-04-17 02:20:36 +04:00
args = next_arg ( args , & param , & val ) ;
2014-04-28 06:04:33 +04:00
/* Stop at -- */
if ( ! val & & strcmp ( param , " -- " ) = = 0 )
2015-08-26 03:12:34 +03:00
return err ? : args ;
2007-01-06 03:36:20 +03:00
irq_was_disabled = irqs_disabled ( ) ;
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
ret = parse_one ( param , val , doing , params , num ,
module: add extra argument for parse_params() callback
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 02:20:03 +03:00
min_level , max_level , arg , unknown ) ;
2012-05-04 04:22:44 +04:00
if ( irq_was_disabled & & ! irqs_disabled ( ) )
pr_warn ( " %s: option '%s' enabled irq's! \n " ,
doing , param ) ;
2005-04-17 02:20:36 +04:00
switch ( ret ) {
2015-08-26 03:12:34 +03:00
case 0 :
continue ;
2005-04-17 02:20:36 +04:00
case - ENOENT :
2012-05-04 04:22:44 +04:00
pr_err ( " %s: Unknown parameter `%s' \n " , doing , param ) ;
2015-08-26 03:12:34 +03:00
break ;
2005-04-17 02:20:36 +04:00
case - ENOSPC :
2012-05-04 04:22:44 +04:00
pr_err ( " %s: `%s' too large for parameter `%s' \n " ,
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
doing , val ? : " " , param ) ;
2005-04-17 02:20:36 +04:00
break ;
default :
2012-05-04 04:22:44 +04:00
pr_err ( " %s: `%s' invalid for parameter `%s' \n " ,
params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:
"Booting kernel" from start_kernel(),
initcall_level_names[i] from do_initcall_level(),
mod->name from load_module(), via parse_args(), parse_one()
parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above. parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.
The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.
Minor tweaks:
Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.
Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level. This adds 7 lines
to dmesg output, like:
initlevel:6=device, 172 registered initcalls
Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above. This array is passed into parse_args() by
do_initcall_level().
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-28 00:30:34 +04:00
doing , val ? : " " , param ) ;
2015-08-26 03:12:34 +03:00
break ;
2005-04-17 02:20:36 +04:00
}
2015-08-26 03:12:34 +03:00
err = ERR_PTR ( ret ) ;
2005-04-17 02:20:36 +04:00
}
2015-08-26 03:12:34 +03:00
return err ;
2005-04-17 02:20:36 +04:00
}
/* Lazy bastard, eh? */
2013-12-04 07:39:38 +04:00
# define STANDARD_PARAM_DEF(name, type, format, strtolfn) \
2010-08-12 09:04:12 +04:00
int param_set_ # # name ( const char * val , const struct kernel_param * kp ) \
2005-04-17 02:20:36 +04:00
{ \
2013-12-04 07:39:38 +04:00
return strtolfn ( val , 0 , ( type * ) kp - > arg ) ; \
2005-04-17 02:20:36 +04:00
} \
2010-08-12 09:04:12 +04:00
int param_get_ # # name ( char * buffer , const struct kernel_param * kp ) \
2005-04-17 02:20:36 +04:00
{ \
2017-10-04 02:16:38 +03:00
return scnprintf ( buffer , PAGE_SIZE , format " \n " , \
2013-08-20 10:05:04 +04:00
* ( ( type * ) kp - > arg ) ) ; \
2010-08-12 09:04:11 +04:00
} \
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_ # # name = { \
2010-08-12 09:04:12 +04:00
. set = param_set_ # # name , \
. get = param_get_ # # name , \
} ; \
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_set_ # # name ) ; \
2010-08-12 09:04:12 +04:00
EXPORT_SYMBOL ( param_get_ # # name ) ; \
EXPORT_SYMBOL ( param_ops_ # # name )
2005-04-17 02:20:36 +04:00
2017-10-04 02:16:41 +03:00
STANDARD_PARAM_DEF ( byte , unsigned char , " %hhu " , kstrtou8 ) ;
STANDARD_PARAM_DEF ( short , short , " %hi " , kstrtos16 ) ;
STANDARD_PARAM_DEF ( ushort , unsigned short , " %hu " , kstrtou16 ) ;
STANDARD_PARAM_DEF ( int , int , " %i " , kstrtoint ) ;
STANDARD_PARAM_DEF ( uint , unsigned int , " %u " , kstrtouint ) ;
STANDARD_PARAM_DEF ( long , long , " %li " , kstrtol ) ;
STANDARD_PARAM_DEF ( ulong , unsigned long , " %lu " , kstrtoul ) ;
STANDARD_PARAM_DEF ( ullong , unsigned long long , " %llu " , kstrtoull ) ;
2005-04-17 02:20:36 +04:00
2010-08-12 09:04:12 +04:00
int param_set_charp ( const char * val , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
if ( strlen ( val ) > 1024 ) {
2012-05-04 04:22:44 +04:00
pr_err ( " %s: string parameter too long \n " , kp - > name ) ;
2005-04-17 02:20:36 +04:00
return - ENOSPC ;
}
2010-08-12 09:04:18 +04:00
maybe_kfree_parameter ( * ( char * * ) kp - > arg ) ;
/* This is a hack. We can't kmalloc in early boot, and we
2009-03-31 23:05:29 +04:00
* don ' t need to ; this mangled commandline is preserved . */
if ( slab_is_available ( ) ) {
2010-08-12 09:04:18 +04:00
* ( char * * ) kp - > arg = kmalloc_parameter ( strlen ( val ) + 1 ) ;
2009-10-29 17:56:17 +03:00
if ( ! * ( char * * ) kp - > arg )
2009-03-31 23:05:29 +04:00
return - ENOMEM ;
2010-08-12 09:04:18 +04:00
strcpy ( * ( char * * ) kp - > arg , val ) ;
2009-03-31 23:05:29 +04:00
} else
* ( const char * * ) kp - > arg = val ;
2005-04-17 02:20:36 +04:00
return 0 ;
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_set_charp ) ;
2005-04-17 02:20:36 +04:00
2010-08-12 09:04:12 +04:00
int param_get_charp ( char * buffer , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2017-10-04 02:16:38 +03:00
return scnprintf ( buffer , PAGE_SIZE , " %s \n " , * ( ( char * * ) kp - > arg ) ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_get_charp ) ;
2005-04-17 02:20:36 +04:00
2015-11-07 03:29:12 +03:00
void param_free_charp ( void * arg )
2010-08-12 09:04:18 +04:00
{
maybe_kfree_parameter ( * ( ( char * * ) arg ) ) ;
}
2015-11-07 03:29:12 +03:00
EXPORT_SYMBOL ( param_free_charp ) ;
2010-08-12 09:04:18 +04:00
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_charp = {
2010-08-12 09:04:12 +04:00
. set = param_set_charp ,
. get = param_get_charp ,
2010-08-12 09:04:18 +04:00
. free = param_free_charp ,
2010-08-12 09:04:12 +04:00
} ;
EXPORT_SYMBOL ( param_ops_charp ) ;
2009-06-13 07:46:57 +04:00
/* Actually could be a bool or an int, for historical reasons. */
2010-08-12 09:04:12 +04:00
int param_set_bool ( const char * val , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
/* No equals means "set"... */
if ( ! val ) val = " 1 " ;
/* One of =[yYnN01] */
2012-03-26 06:20:51 +04:00
return strtobool ( val , kp - > arg ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_set_bool ) ;
2005-04-17 02:20:36 +04:00
2010-08-12 09:04:12 +04:00
int param_get_bool ( char * buffer , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
/* Y and N chosen as being relatively non-coder friendly */
2017-10-04 02:16:38 +03:00
return sprintf ( buffer , " %c \n " , * ( bool * ) kp - > arg ? ' Y ' : ' N ' ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_get_bool ) ;
2005-04-17 02:20:36 +04:00
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_bool = {
2014-08-27 00:51:23 +04:00
. flags = KERNEL_PARAM_OPS_FL_NOARG ,
2010-08-12 09:04:12 +04:00
. set = param_set_bool ,
. get = param_get_bool ,
} ;
EXPORT_SYMBOL ( param_ops_bool ) ;
2015-05-27 04:39:38 +03:00
int param_set_bool_enable_only ( const char * val , const struct kernel_param * kp )
{
int err = 0 ;
bool new_value ;
bool orig_value = * ( bool * ) kp - > arg ;
struct kernel_param dummy_kp = * kp ;
dummy_kp . arg = & new_value ;
err = param_set_bool ( val , & dummy_kp ) ;
if ( err )
return err ;
/* Don't let them unset it once it's set! */
if ( ! new_value & & orig_value )
return - EROFS ;
if ( new_value )
err = param_set_bool ( val , kp ) ;
return err ;
}
EXPORT_SYMBOL_GPL ( param_set_bool_enable_only ) ;
const struct kernel_param_ops param_ops_bool_enable_only = {
. flags = KERNEL_PARAM_OPS_FL_NOARG ,
. set = param_set_bool_enable_only ,
. get = param_get_bool ,
} ;
2015-05-27 04:39:39 +03:00
EXPORT_SYMBOL_GPL ( param_ops_bool_enable_only ) ;
2015-05-27 04:39:38 +03:00
2009-06-13 07:46:57 +04:00
/* This one must be bool. */
2010-08-12 09:04:12 +04:00
int param_set_invbool ( const char * val , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2009-06-13 07:46:57 +04:00
int ret ;
bool boolval ;
2007-10-17 10:29:34 +04:00
struct kernel_param dummy ;
2005-04-17 02:20:36 +04:00
2007-10-17 10:29:34 +04:00
dummy . arg = & boolval ;
2005-04-17 02:20:36 +04:00
ret = param_set_bool ( val , & dummy ) ;
if ( ret = = 0 )
2009-06-13 07:46:53 +04:00
* ( bool * ) kp - > arg = ! boolval ;
2005-04-17 02:20:36 +04:00
return ret ;
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_set_invbool ) ;
2005-04-17 02:20:36 +04:00
2010-08-12 09:04:12 +04:00
int param_get_invbool ( char * buffer , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2017-10-04 02:16:38 +03:00
return sprintf ( buffer , " %c \n " , ( * ( bool * ) kp - > arg ) ? ' N ' : ' Y ' ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_get_invbool ) ;
2005-04-17 02:20:36 +04:00
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_invbool = {
2010-08-12 09:04:12 +04:00
. set = param_set_invbool ,
. get = param_get_invbool ,
} ;
EXPORT_SYMBOL ( param_ops_invbool ) ;
2012-01-13 03:02:17 +04:00
int param_set_bint ( const char * val , const struct kernel_param * kp )
{
2015-06-16 23:47:52 +03:00
/* Match bool exactly, by re-using it. */
struct kernel_param boolkp = * kp ;
2012-01-13 03:02:17 +04:00
bool v ;
int ret ;
boolkp . arg = & v ;
ret = param_set_bool ( val , & boolkp ) ;
if ( ret = = 0 )
* ( int * ) kp - > arg = v ;
return ret ;
}
EXPORT_SYMBOL ( param_set_bint ) ;
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_bint = {
2014-08-27 00:51:23 +04:00
. flags = KERNEL_PARAM_OPS_FL_NOARG ,
2012-01-13 03:02:17 +04:00
. set = param_set_bint ,
. get = param_get_int ,
} ;
EXPORT_SYMBOL ( param_ops_bint ) ;
2007-05-08 11:28:50 +04:00
/* We break the rule and mangle the string. */
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
static int param_array ( struct module * mod ,
const char * name ,
2006-03-25 14:07:06 +03:00
const char * val ,
unsigned int min , unsigned int max ,
void * elem , int elemsize ,
2010-08-12 09:04:12 +04:00
int ( * set ) ( const char * , const struct kernel_param * kp ) ,
2012-03-26 06:20:51 +04:00
s16 level ,
2008-02-06 12:37:50 +03:00
unsigned int * num )
2005-04-17 02:20:36 +04:00
{
int ret ;
struct kernel_param kp ;
char save ;
/* Get the name right for errors. */
kp . name = name ;
kp . arg = elem ;
2012-03-26 06:20:51 +04:00
kp . level = level ;
2005-04-17 02:20:36 +04:00
* num = 0 ;
/* We expect a comma-separated list of values. */
do {
int len ;
if ( * num = = max ) {
2012-05-04 04:22:44 +04:00
pr_err ( " %s: can only take %i arguments \n " , name , max ) ;
2005-04-17 02:20:36 +04:00
return - EINVAL ;
}
len = strcspn ( val , " , " ) ;
/* nul-terminate and parse */
save = val [ len ] ;
( ( char * ) val ) [ len ] = ' \0 ' ;
2015-06-26 00:14:38 +03:00
check_kparam_locked ( mod ) ;
2005-04-17 02:20:36 +04:00
ret = set ( val , & kp ) ;
if ( ret ! = 0 )
return ret ;
kp . arg + = elemsize ;
val + = len + 1 ;
( * num ) + + ;
} while ( save = = ' , ' ) ;
if ( * num < min ) {
2012-05-04 04:22:44 +04:00
pr_err ( " %s: needs at least %i arguments \n " , name , min ) ;
2005-04-17 02:20:36 +04:00
return - EINVAL ;
}
return 0 ;
}
2010-08-12 09:04:12 +04:00
static int param_array_set ( const char * val , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2007-10-17 10:29:34 +04:00
const struct kparam_array * arr = kp - > arr ;
[PATCH] kernel/param.c: don't use .max when .num is NULL in param_array_set()
there seems to be a bug, at least for me, in kernel/param.c for arrays with
.num == NULL. If .num == NULL, the function param_array_set() uses &.max
for the call to param_array(), wich alters the .max value to the number of
arguments. The result is, you can't set more array arguments as the last
time you set the parameter.
example:
# a module 'example' with
# static int array[10] = { 0, };
# module_param_array(array, int, NULL, 0644);
$ insmod example.ko array=1,2,3
$ cat /sys/module/example/parameters/array
1,2,3
$ echo "4,3,2,1" > /sys/module/example/parameters/array
$ dmesg | tail -n 1
kernel: array: can take only 3 arguments
Signed-off-by: Bert Wesarg <wesarg@informatik.uni-halle.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 02:25:42 +04:00
unsigned int temp_num ;
2005-04-17 02:20:36 +04:00
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
return param_array ( kp - > mod , kp - > name , val , 1 , arr - > max , arr - > elem ,
2012-03-26 06:20:51 +04:00
arr - > elemsize , arr - > ops - > set , kp - > level ,
2009-10-29 17:56:19 +03:00
arr - > num ? : & temp_num ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:12 +04:00
static int param_array_get ( char * buffer , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
int i , off , ret ;
2007-10-17 10:29:34 +04:00
const struct kparam_array * arr = kp - > arr ;
2015-06-16 23:47:52 +03:00
struct kernel_param p = * kp ;
2005-04-17 02:20:36 +04:00
for ( i = off = 0 ; i < ( arr - > num ? * arr - > num : arr - > max ) ; i + + ) {
2017-10-04 02:16:38 +03:00
/* Replace \n with comma */
2005-04-17 02:20:36 +04:00
if ( i )
2017-10-04 02:16:38 +03:00
buffer [ off - 1 ] = ' , ' ;
2005-04-17 02:20:36 +04:00
p . arg = arr - > elem + arr - > elemsize * i ;
2015-06-26 00:14:38 +03:00
check_kparam_locked ( p . mod ) ;
2010-08-12 09:04:12 +04:00
ret = arr - > ops - > get ( buffer + off , & p ) ;
2005-04-17 02:20:36 +04:00
if ( ret < 0 )
return ret ;
off + = ret ;
}
buffer [ off ] = ' \0 ' ;
return off ;
}
2010-08-12 09:04:17 +04:00
static void param_array_free ( void * arg )
{
unsigned int i ;
const struct kparam_array * arr = arg ;
if ( arr - > ops - > free )
for ( i = 0 ; i < ( arr - > num ? * arr - > num : arr - > max ) ; i + + )
arr - > ops - > free ( arr - > elem + arr - > elemsize * i ) ;
}
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_array_ops = {
2010-08-12 09:04:12 +04:00
. set = param_array_set ,
. get = param_array_get ,
2010-08-12 09:04:17 +04:00
. free = param_array_free ,
2010-08-12 09:04:12 +04:00
} ;
EXPORT_SYMBOL ( param_array_ops ) ;
int param_set_copystring ( const char * val , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2007-10-17 10:29:34 +04:00
const struct kparam_string * kps = kp - > str ;
2005-04-17 02:20:36 +04:00
if ( strlen ( val ) + 1 > kps - > maxlen ) {
2012-05-04 04:22:44 +04:00
pr_err ( " %s: string doesn't fit in %u chars. \n " ,
2005-04-17 02:20:36 +04:00
kp - > name , kps - > maxlen - 1 ) ;
return - ENOSPC ;
}
strcpy ( kps - > string , val ) ;
return 0 ;
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_set_copystring ) ;
2005-04-17 02:20:36 +04:00
2010-08-12 09:04:12 +04:00
int param_get_string ( char * buffer , const struct kernel_param * kp )
2005-04-17 02:20:36 +04:00
{
2007-10-17 10:29:34 +04:00
const struct kparam_string * kps = kp - > str ;
2017-10-04 02:16:38 +03:00
return scnprintf ( buffer , PAGE_SIZE , " %s \n " , kps - > string ) ;
2005-04-17 02:20:36 +04:00
}
2010-08-12 09:04:11 +04:00
EXPORT_SYMBOL ( param_get_string ) ;
2005-04-17 02:20:36 +04:00
2015-05-27 04:39:38 +03:00
const struct kernel_param_ops param_ops_string = {
2010-08-12 09:04:12 +04:00
. set = param_set_copystring ,
. get = param_get_string ,
} ;
EXPORT_SYMBOL ( param_ops_string ) ;
2005-04-17 02:20:36 +04:00
/* sysfs output in /sys/modules/XYZ/parameters/ */
2010-02-02 02:26:59 +03:00
# define to_module_attr(n) container_of(n, struct module_attribute, attr)
# define to_module_kobject(n) container_of(n, struct module_kobject, kobj)
2005-04-17 02:20:36 +04:00
struct param_attribute
{
struct module_attribute mattr ;
2010-08-12 09:04:12 +04:00
const struct kernel_param * param ;
2005-04-17 02:20:36 +04:00
} ;
struct module_param_attrs
{
2008-10-22 19:00:22 +04:00
unsigned int num ;
2005-04-17 02:20:36 +04:00
struct attribute_group grp ;
struct param_attribute attrs [ 0 ] ;
} ;
2007-02-14 02:19:06 +03:00
# ifdef CONFIG_SYSFS
2010-02-02 02:26:59 +03:00
# define to_param_attr(n) container_of(n, struct param_attribute, mattr)
2005-04-17 02:20:36 +04:00
static ssize_t param_attr_show ( struct module_attribute * mattr ,
2011-07-24 16:36:04 +04:00
struct module_kobject * mk , char * buf )
2005-04-17 02:20:36 +04:00
{
int count ;
struct param_attribute * attribute = to_param_attr ( mattr ) ;
2010-08-12 09:04:12 +04:00
if ( ! attribute - > param - > ops - > get )
2005-04-17 02:20:36 +04:00
return - EPERM ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_lock ( mk - > mod ) ;
2010-08-12 09:04:12 +04:00
count = attribute - > param - > ops - > get ( buf , attribute - > param ) ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_unlock ( mk - > mod ) ;
2005-04-17 02:20:36 +04:00
return count ;
}
/* sysfs always hands a nul-terminated string in buf. We rely on that. */
static ssize_t param_attr_store ( struct module_attribute * mattr ,
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
struct module_kobject * mk ,
2005-04-17 02:20:36 +04:00
const char * buf , size_t len )
{
int err ;
struct param_attribute * attribute = to_param_attr ( mattr ) ;
2010-08-12 09:04:12 +04:00
if ( ! attribute - > param - > ops - > set )
2005-04-17 02:20:36 +04:00
return - EPERM ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_lock ( mk - > mod ) ;
2019-08-20 03:17:55 +03:00
if ( param_check_unsafe ( attribute - > param ) )
err = attribute - > param - > ops - > set ( buf , attribute - > param ) ;
else
err = - EPERM ;
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
kernel_param_unlock ( mk - > mod ) ;
2005-04-17 02:20:36 +04:00
if ( ! err )
return len ;
return err ;
}
2007-02-14 02:19:06 +03:00
# endif
2005-04-17 02:20:36 +04:00
# ifdef CONFIG_MODULES
# define __modinit
# else
# define __modinit __init
# endif
2007-02-14 02:19:06 +03:00
# ifdef CONFIG_SYSFS
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
void kernel_param_lock ( struct module * mod )
2010-08-12 09:04:19 +04:00
{
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
mutex_lock ( KPARAM_MUTEX ( mod ) ) ;
2010-08-12 09:04:19 +04:00
}
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
void kernel_param_unlock ( struct module * mod )
2010-08-12 09:04:19 +04:00
{
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
mutex_unlock ( KPARAM_MUTEX ( mod ) ) ;
2010-08-12 09:04:19 +04:00
}
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 23:48:52 +03:00
EXPORT_SYMBOL ( kernel_param_lock ) ;
EXPORT_SYMBOL ( kernel_param_unlock ) ;
2010-08-12 09:04:19 +04:00
2005-04-17 02:20:36 +04:00
/*
2008-10-22 19:00:22 +04:00
* add_sysfs_param - add a parameter to sysfs
* @ mk : struct module_kobject
2017-10-04 02:14:18 +03:00
* @ kp : the actual parameter definition to add to sysfs
2008-10-22 19:00:22 +04:00
* @ name : name of parameter
2005-04-17 02:20:36 +04:00
*
2008-10-22 19:00:22 +04:00
* Create a kobject if for a ( per - module ) parameter if mp NULL , and
* create file in sysfs . Returns an error on out of memory . Always cleans up
* if there ' s an error .
2005-04-17 02:20:36 +04:00
*/
2008-10-22 19:00:22 +04:00
static __modinit int add_sysfs_param ( struct module_kobject * mk ,
2010-08-12 09:04:12 +04:00
const struct kernel_param * kp ,
2008-10-22 19:00:22 +04:00
const char * name )
2005-04-17 02:20:36 +04:00
{
2014-11-10 02:02:29 +03:00
struct module_param_attrs * new_mp ;
struct attribute * * new_attrs ;
unsigned int i ;
2008-10-22 19:00:22 +04:00
/* We don't bother calling this with invisible parameters. */
BUG_ON ( ! kp - > perm ) ;
if ( ! mk - > mp ) {
2014-11-10 02:02:29 +03:00
/* First allocation. */
mk - > mp = kzalloc ( sizeof ( * mk - > mp ) , GFP_KERNEL ) ;
if ( ! mk - > mp )
return - ENOMEM ;
mk - > mp - > grp . name = " parameters " ;
/* NULL-terminated attribute array. */
mk - > mp - > grp . attrs = kzalloc ( sizeof ( mk - > mp - > grp . attrs [ 0 ] ) ,
GFP_KERNEL ) ;
/* Caller will cleanup via free_module_param_attrs */
if ( ! mk - > mp - > grp . attrs )
return - ENOMEM ;
2008-10-22 19:00:22 +04:00
}
2005-04-17 02:20:36 +04:00
2014-11-10 02:02:29 +03:00
/* Enlarge allocations. */
new_mp = krealloc ( mk - > mp ,
sizeof ( * mk - > mp ) +
sizeof ( mk - > mp - > attrs [ 0 ] ) * ( mk - > mp - > num + 1 ) ,
GFP_KERNEL ) ;
if ( ! new_mp )
return - ENOMEM ;
mk - > mp = new_mp ;
/* Extra pointer for NULL terminator */
new_attrs = krealloc ( mk - > mp - > grp . attrs ,
sizeof ( mk - > mp - > grp . attrs [ 0 ] ) * ( mk - > mp - > num + 2 ) ,
GFP_KERNEL ) ;
if ( ! new_attrs )
return - ENOMEM ;
mk - > mp - > grp . attrs = new_attrs ;
2008-10-22 19:00:22 +04:00
/* Tack new one on the end. */
2015-01-20 01:37:04 +03:00
memset ( & mk - > mp - > attrs [ mk - > mp - > num ] , 0 , sizeof ( mk - > mp - > attrs [ 0 ] ) ) ;
2014-11-10 02:02:29 +03:00
sysfs_attr_init ( & mk - > mp - > attrs [ mk - > mp - > num ] . mattr . attr ) ;
mk - > mp - > attrs [ mk - > mp - > num ] . param = kp ;
mk - > mp - > attrs [ mk - > mp - > num ] . mattr . show = param_attr_show ;
2014-12-12 06:06:49 +03:00
/* Do not allow runtime DAC changes to make param writable. */
if ( ( kp - > perm & ( S_IWUSR | S_IWGRP | S_IWOTH ) ) ! = 0 )
mk - > mp - > attrs [ mk - > mp - > num ] . mattr . store = param_attr_store ;
2014-12-23 07:35:36 +03:00
else
mk - > mp - > attrs [ mk - > mp - > num ] . mattr . store = NULL ;
2014-11-10 02:02:29 +03:00
mk - > mp - > attrs [ mk - > mp - > num ] . mattr . attr . name = ( char * ) name ;
mk - > mp - > attrs [ mk - > mp - > num ] . mattr . attr . mode = kp - > perm ;
mk - > mp - > num + + ;
2008-10-22 19:00:22 +04:00
/* Fix up all the pointers, since krealloc can move us */
2014-11-10 02:02:29 +03:00
for ( i = 0 ; i < mk - > mp - > num ; i + + )
mk - > mp - > grp . attrs [ i ] = & mk - > mp - > attrs [ i ] . mattr . attr ;
mk - > mp - > grp . attrs [ mk - > mp - > num ] = NULL ;
2008-10-22 19:00:22 +04:00
return 0 ;
}
2005-04-17 02:20:36 +04:00
2008-10-23 23:07:17 +04:00
# ifdef CONFIG_MODULES
2008-10-22 19:00:22 +04:00
static void free_module_param_attrs ( struct module_kobject * mk )
{
2014-11-10 02:02:29 +03:00
if ( mk - > mp )
kfree ( mk - > mp - > grp . attrs ) ;
2008-10-22 19:00:22 +04:00
kfree ( mk - > mp ) ;
mk - > mp = NULL ;
2005-04-17 02:20:36 +04:00
}
/*
* module_param_sysfs_setup - setup sysfs support for one module
* @ mod : module
* @ kparam : module parameters ( array )
* @ num_params : number of module parameters
*
2008-10-22 19:00:22 +04:00
* Adds sysfs entries for module parameters under
* / sys / module / [ mod - > name ] / parameters /
2005-04-17 02:20:36 +04:00
*/
int module_param_sysfs_setup ( struct module * mod ,
2010-08-12 09:04:12 +04:00
const struct kernel_param * kparam ,
2005-04-17 02:20:36 +04:00
unsigned int num_params )
{
2008-10-22 19:00:22 +04:00
int i , err ;
bool params = false ;
for ( i = 0 ; i < num_params ; i + + ) {
if ( kparam [ i ] . perm = = 0 )
continue ;
err = add_sysfs_param ( & mod - > mkobj , & kparam [ i ] , kparam [ i ] . name ) ;
2014-11-10 02:02:29 +03:00
if ( err ) {
free_module_param_attrs ( & mod - > mkobj ) ;
2008-10-22 19:00:22 +04:00
return err ;
2014-11-10 02:02:29 +03:00
}
2008-10-22 19:00:22 +04:00
params = true ;
}
2005-04-17 02:20:36 +04:00
2008-10-22 19:00:22 +04:00
if ( ! params )
return 0 ;
2005-04-17 02:20:36 +04:00
2008-10-22 19:00:22 +04:00
/* Create the param group. */
err = sysfs_create_group ( & mod - > mkobj . kobj , & mod - > mkobj . mp - > grp ) ;
if ( err )
free_module_param_attrs ( & mod - > mkobj ) ;
return err ;
2005-04-17 02:20:36 +04:00
}
/*
* module_param_sysfs_remove - remove sysfs support for one module
* @ mod : module
*
* Remove sysfs entries for module parameters and the corresponding
* kobject .
*/
void module_param_sysfs_remove ( struct module * mod )
{
2008-10-22 19:00:22 +04:00
if ( mod - > mkobj . mp ) {
sysfs_remove_group ( & mod - > mkobj . kobj , & mod - > mkobj . mp - > grp ) ;
2005-04-17 02:20:36 +04:00
/* We are positive that no one is using any param
* attrs at this point . Deallocate immediately . */
2008-10-22 19:00:22 +04:00
free_module_param_attrs ( & mod - > mkobj ) ;
2005-04-17 02:20:36 +04:00
}
}
# endif
2009-03-31 23:05:29 +04:00
void destroy_params ( const struct kernel_param * params , unsigned num )
{
2010-08-12 09:04:17 +04:00
unsigned int i ;
for ( i = 0 ; i < num ; i + + )
if ( params [ i ] . ops - > free )
params [ i ] . ops - > free ( params [ i ] . arg ) ;
2009-03-31 23:05:29 +04:00
}
2010-12-16 01:00:19 +03:00
static struct module_kobject * __init locate_module_kobject ( const char * name )
2005-04-17 02:20:36 +04:00
{
struct module_kobject * mk ;
2008-10-22 19:00:22 +04:00
struct kobject * kobj ;
int err ;
2005-04-17 02:20:36 +04:00
2008-10-22 19:00:22 +04:00
kobj = kset_find_obj ( module_kset , name ) ;
if ( kobj ) {
mk = to_module_kobject ( kobj ) ;
} else {
mk = kzalloc ( sizeof ( struct module_kobject ) , GFP_KERNEL ) ;
BUG_ON ( ! mk ) ;
mk - > mod = THIS_MODULE ;
mk - > kobj . kset = module_kset ;
err = kobject_init_and_add ( & mk - > kobj , & module_ktype , NULL ,
" %s " , name ) ;
2011-07-24 16:36:04 +04:00
# ifdef CONFIG_MODULES
if ( ! err )
err = sysfs_create_file ( & mk - > kobj , & module_uevent . attr ) ;
# endif
2008-10-22 19:00:22 +04:00
if ( err ) {
kobject_put ( & mk - > kobj ) ;
2012-05-04 04:22:44 +04:00
pr_crit ( " Adding module '%s' to sysfs failed (%d), the system may be unstable. \n " ,
2010-12-16 01:00:19 +03:00
name , err ) ;
return NULL ;
2008-10-22 19:00:22 +04:00
}
2010-12-16 01:00:19 +03:00
/* So that we hold reference in both cases. */
2008-10-22 19:00:22 +04:00
kobject_get ( & mk - > kobj ) ;
2007-07-30 22:26:38 +04:00
}
2008-10-22 19:00:22 +04:00
2010-12-16 01:00:19 +03:00
return mk ;
}
static void __init kernel_add_sysfs_param ( const char * name ,
2014-10-14 02:55:44 +04:00
const struct kernel_param * kparam ,
2010-12-16 01:00:19 +03:00
unsigned int name_skip )
{
struct module_kobject * mk ;
int err ;
mk = locate_module_kobject ( name ) ;
if ( ! mk )
return ;
/* We need to remove old parameters before adding more. */
if ( mk - > mp )
sysfs_remove_group ( & mk - > kobj , & mk - > mp - > grp ) ;
2008-10-22 19:00:22 +04:00
/* These should not fail at boot. */
err = add_sysfs_param ( mk , kparam , kparam - > name + name_skip ) ;
BUG_ON ( err ) ;
err = sysfs_create_group ( & mk - > kobj , & mk - > mp - > grp ) ;
BUG_ON ( err ) ;
2007-01-15 22:22:02 +03:00
kobject_uevent ( & mk - > kobj , KOBJ_ADD ) ;
2008-10-22 19:00:22 +04:00
kobject_put ( & mk - > kobj ) ;
2005-04-17 02:20:36 +04:00
}
/*
2013-07-02 10:05:11 +04:00
* param_sysfs_builtin - add sysfs parameters for built - in modules
2005-04-17 02:20:36 +04:00
*
* Add module_parameters to sysfs for " modules " built into the kernel .
*
* The " module " name ( KBUILD_MODNAME ) is stored before a dot , the
* " parameter " name is stored behind a dot in kernel_param - > name . So ,
* extract the " module " name for all built - in kernel_param - eters ,
2008-10-22 19:00:22 +04:00
* and for all who have the same , call kernel_add_sysfs_param .
2005-04-17 02:20:36 +04:00
*/
static void __init param_sysfs_builtin ( void )
{
2014-10-14 02:55:44 +04:00
const struct kernel_param * kp ;
2008-10-22 19:00:22 +04:00
unsigned int name_len ;
char modname [ MODULE_NAME_LEN ] ;
2005-04-17 02:20:36 +04:00
2008-10-22 19:00:22 +04:00
for ( kp = __start___param ; kp < __stop___param ; kp + + ) {
2005-04-17 02:20:36 +04:00
char * dot ;
2008-10-22 19:00:22 +04:00
if ( kp - > perm = = 0 )
continue ;
2005-04-17 02:20:36 +04:00
2008-10-22 19:00:22 +04:00
dot = strchr ( kp - > name , ' . ' ) ;
2005-04-17 02:20:36 +04:00
if ( ! dot ) {
2008-10-22 19:00:23 +04:00
/* This happens for core_param() */
strcpy ( modname , " kernel " ) ;
name_len = 0 ;
} else {
name_len = dot - kp - > name + 1 ;
strlcpy ( modname , kp - > name , name_len ) ;
2005-04-17 02:20:36 +04:00
}
2008-10-22 19:00:23 +04:00
kernel_add_sysfs_param ( modname , kp , name_len ) ;
2005-04-17 02:20:36 +04:00
}
}
2010-12-16 01:00:19 +03:00
ssize_t __modver_version_show ( struct module_attribute * mattr ,
2011-07-24 16:36:04 +04:00
struct module_kobject * mk , char * buf )
2010-12-16 01:00:19 +03:00
{
struct module_version_attribute * vattr =
container_of ( mattr , struct module_version_attribute , mattr ) ;
2013-08-20 10:05:04 +04:00
return scnprintf ( buf , PAGE_SIZE , " %s \n " , vattr - > version ) ;
2010-12-16 01:00:19 +03:00
}
2011-02-08 03:02:25 +03:00
extern const struct module_version_attribute * __start___modver [ ] ;
extern const struct module_version_attribute * __stop___modver [ ] ;
2010-12-16 01:00:19 +03:00
static void __init version_sysfs_builtin ( void )
{
2011-02-08 03:02:25 +03:00
const struct module_version_attribute * * p ;
2010-12-16 01:00:19 +03:00
struct module_kobject * mk ;
int err ;
2011-02-08 03:02:25 +03:00
for ( p = __start___modver ; p < __stop___modver ; p + + ) {
const struct module_version_attribute * vattr = * p ;
2010-12-16 01:00:19 +03:00
mk = locate_module_kobject ( vattr - > module_name ) ;
if ( mk ) {
err = sysfs_create_file ( & mk - > kobj , & vattr - > mattr . attr ) ;
2015-06-16 23:46:52 +03:00
WARN_ON_ONCE ( err ) ;
2010-12-16 01:00:19 +03:00
kobject_uevent ( & mk - > kobj , KOBJ_ADD ) ;
kobject_put ( & mk - > kobj ) ;
}
}
}
2005-04-17 02:20:36 +04:00
/* module-related sysfs stuff */
static ssize_t module_attr_show ( struct kobject * kobj ,
struct attribute * attr ,
char * buf )
{
struct module_attribute * attribute ;
struct module_kobject * mk ;
int ret ;
attribute = to_module_attr ( attr ) ;
mk = to_module_kobject ( kobj ) ;
if ( ! attribute - > show )
2005-04-29 10:27:34 +04:00
return - EIO ;
2005-04-17 02:20:36 +04:00
2011-07-24 16:36:04 +04:00
ret = attribute - > show ( attribute , mk , buf ) ;
2005-04-17 02:20:36 +04:00
return ret ;
}
static ssize_t module_attr_store ( struct kobject * kobj ,
struct attribute * attr ,
const char * buf , size_t len )
{
struct module_attribute * attribute ;
struct module_kobject * mk ;
int ret ;
attribute = to_module_attr ( attr ) ;
mk = to_module_kobject ( kobj ) ;
if ( ! attribute - > store )
2005-04-29 10:27:34 +04:00
return - EIO ;
2005-04-17 02:20:36 +04:00
2011-07-24 16:36:04 +04:00
ret = attribute - > store ( attribute , mk , buf , len ) ;
2005-04-17 02:20:36 +04:00
return ret ;
}
2010-01-19 04:58:23 +03:00
static const struct sysfs_ops module_sysfs_ops = {
2005-04-17 02:20:36 +04:00
. show = module_attr_show ,
. store = module_attr_store ,
} ;
2007-01-18 15:26:15 +03:00
static int uevent_filter ( struct kset * kset , struct kobject * kobj )
{
struct kobj_type * ktype = get_ktype ( kobj ) ;
if ( ktype = = & module_ktype )
return 1 ;
return 0 ;
}
2009-12-31 16:52:51 +03:00
static const struct kset_uevent_ops module_uevent_ops = {
2007-01-18 15:26:15 +03:00
. filter = uevent_filter ,
} ;
2007-11-01 20:39:50 +03:00
struct kset * module_kset ;
2007-04-14 00:15:19 +04:00
int module_sysfs_initialized ;
2005-04-17 02:20:36 +04:00
2013-09-03 11:03:57 +04:00
static void module_kobj_release ( struct kobject * kobj )
{
struct module_kobject * mk = to_module_kobject ( kobj ) ;
complete ( mk - > kobj_completion ) ;
}
2007-11-01 20:39:50 +03:00
struct kobj_type module_ktype = {
2013-09-03 11:03:57 +04:00
. release = module_kobj_release ,
2005-04-17 02:20:36 +04:00
. sysfs_ops = & module_sysfs_ops ,
} ;
/*
* param_sysfs_init - wrapper for built - in params support
*/
static int __init param_sysfs_init ( void )
{
2007-11-01 20:39:50 +03:00
module_kset = kset_create_and_add ( " module " , & module_uevent_ops , NULL ) ;
if ( ! module_kset ) {
printk ( KERN_WARNING " %s (%d): error creating kset \n " ,
__FILE__ , __LINE__ ) ;
return - ENOMEM ;
2006-09-29 12:58:55 +04:00
}
2007-04-14 00:15:19 +04:00
module_sysfs_initialized = 1 ;
2005-04-17 02:20:36 +04:00
2010-12-16 01:00:19 +03:00
version_sysfs_builtin ( ) ;
2005-04-17 02:20:36 +04:00
param_sysfs_builtin ( ) ;
return 0 ;
}
2006-09-29 12:59:34 +04:00
subsys_initcall ( param_sysfs_init ) ;
2005-04-17 02:20:36 +04:00
2007-11-01 20:39:50 +03:00
# endif /* CONFIG_SYSFS */
