iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c

532 lines
11 KiB
C
Raw Normal View History

drm/panel: add panel driver for Leadtek LTK500HD1829 The LTK500HD1829 is 5.5" DSI display. v5: - Fix some trivial checkpatch warnings while applying (sam) changes in v4: - drop error message if backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v3: - drop one more overlooked panel->drm access Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de
2019-12-24 12:26:41 +01:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 Theobroma Systems Design und Consulting GmbH
*
* base on panel-kingdisplay-kd097d04.c
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
struct ltk500hd1829 {
struct device *dev;
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct regulator *vcc;
struct regulator *iovcc;
bool prepared;
};
struct ltk500hd1829_cmd {
char cmd;
char data;
};
/*
* There is no description in the Reference Manual about these commands.
* We received them from the vendor, so just use them as is.
*/
static const struct ltk500hd1829_cmd init_code[] = {
{ 0xE0, 0x00 },
{ 0xE1, 0x93 },
{ 0xE2, 0x65 },
{ 0xE3, 0xF8 },
{ 0x80, 0x03 },
{ 0xE0, 0x04 },
{ 0x2D, 0x03 },
{ 0xE0, 0x01 },
{ 0x00, 0x00 },
{ 0x01, 0xB6 },
{ 0x03, 0x00 },
{ 0x04, 0xC5 },
{ 0x17, 0x00 },
{ 0x18, 0xBF },
{ 0x19, 0x01 },
{ 0x1A, 0x00 },
{ 0x1B, 0xBF },
{ 0x1C, 0x01 },
{ 0x1F, 0x7C },
{ 0x20, 0x26 },
{ 0x21, 0x26 },
{ 0x22, 0x4E },
{ 0x37, 0x09 },
{ 0x38, 0x04 },
{ 0x39, 0x08 },
{ 0x3A, 0x1F },
{ 0x3B, 0x1F },
{ 0x3C, 0x78 },
{ 0x3D, 0xFF },
{ 0x3E, 0xFF },
{ 0x3F, 0x00 },
{ 0x40, 0x04 },
{ 0x41, 0xA0 },
{ 0x43, 0x0F },
{ 0x44, 0x0A },
{ 0x45, 0x24 },
{ 0x55, 0x01 },
{ 0x56, 0x01 },
{ 0x57, 0xA5 },
{ 0x58, 0x0A },
{ 0x59, 0x4A },
{ 0x5A, 0x38 },
{ 0x5B, 0x10 },
{ 0x5C, 0x19 },
{ 0x5D, 0x7C },
{ 0x5E, 0x64 },
{ 0x5F, 0x54 },
{ 0x60, 0x48 },
{ 0x61, 0x44 },
{ 0x62, 0x35 },
{ 0x63, 0x3A },
{ 0x64, 0x24 },
{ 0x65, 0x3B },
{ 0x66, 0x39 },
{ 0x67, 0x37 },
{ 0x68, 0x56 },
{ 0x69, 0x41 },
{ 0x6A, 0x47 },
{ 0x6B, 0x2F },
{ 0x6C, 0x23 },
{ 0x6D, 0x13 },
{ 0x6E, 0x02 },
{ 0x6F, 0x08 },
{ 0x70, 0x7C },
{ 0x71, 0x64 },
{ 0x72, 0x54 },
{ 0x73, 0x48 },
{ 0x74, 0x44 },
{ 0x75, 0x35 },
{ 0x76, 0x3A },
{ 0x77, 0x22 },
{ 0x78, 0x3B },
{ 0x79, 0x39 },
{ 0x7A, 0x38 },
{ 0x7B, 0x52 },
{ 0x7C, 0x41 },
{ 0x7D, 0x47 },
{ 0x7E, 0x2F },
{ 0x7F, 0x23 },
{ 0x80, 0x13 },
{ 0x81, 0x02 },
{ 0x82, 0x08 },
{ 0xE0, 0x02 },
{ 0x00, 0x57 },
{ 0x01, 0x77 },
{ 0x02, 0x44 },
{ 0x03, 0x46 },
{ 0x04, 0x48 },
{ 0x05, 0x4A },
{ 0x06, 0x4C },
{ 0x07, 0x4E },
{ 0x08, 0x50 },
{ 0x09, 0x55 },
{ 0x0A, 0x52 },
{ 0x0B, 0x55 },
{ 0x0C, 0x55 },
{ 0x0D, 0x55 },
{ 0x0E, 0x55 },
{ 0x0F, 0x55 },
{ 0x10, 0x55 },
{ 0x11, 0x55 },
{ 0x12, 0x55 },
{ 0x13, 0x40 },
{ 0x14, 0x55 },
{ 0x15, 0x55 },
{ 0x16, 0x57 },
{ 0x17, 0x77 },
{ 0x18, 0x45 },
{ 0x19, 0x47 },
{ 0x1A, 0x49 },
{ 0x1B, 0x4B },
{ 0x1C, 0x4D },
{ 0x1D, 0x4F },
{ 0x1E, 0x51 },
{ 0x1F, 0x55 },
{ 0x20, 0x53 },
{ 0x21, 0x55 },
{ 0x22, 0x55 },
{ 0x23, 0x55 },
{ 0x24, 0x55 },
{ 0x25, 0x55 },
{ 0x26, 0x55 },
{ 0x27, 0x55 },
{ 0x28, 0x55 },
{ 0x29, 0x41 },
{ 0x2A, 0x55 },
{ 0x2B, 0x55 },
{ 0x2C, 0x57 },
{ 0x2D, 0x77 },
{ 0x2E, 0x4F },
{ 0x2F, 0x4D },
{ 0x30, 0x4B },
{ 0x31, 0x49 },
{ 0x32, 0x47 },
{ 0x33, 0x45 },
{ 0x34, 0x41 },
{ 0x35, 0x55 },
{ 0x36, 0x53 },
{ 0x37, 0x55 },
{ 0x38, 0x55 },
{ 0x39, 0x55 },
{ 0x3A, 0x55 },
{ 0x3B, 0x55 },
{ 0x3C, 0x55 },
{ 0x3D, 0x55 },
{ 0x3E, 0x55 },
{ 0x3F, 0x51 },
{ 0x40, 0x55 },
{ 0x41, 0x55 },
{ 0x42, 0x57 },
{ 0x43, 0x77 },
{ 0x44, 0x4E },
{ 0x45, 0x4C },
{ 0x46, 0x4A },
{ 0x47, 0x48 },
{ 0x48, 0x46 },
{ 0x49, 0x44 },
{ 0x4A, 0x40 },
{ 0x4B, 0x55 },
{ 0x4C, 0x52 },
{ 0x4D, 0x55 },
{ 0x4E, 0x55 },
{ 0x4F, 0x55 },
{ 0x50, 0x55 },
{ 0x51, 0x55 },
{ 0x52, 0x55 },
{ 0x53, 0x55 },
{ 0x54, 0x55 },
{ 0x55, 0x50 },
{ 0x56, 0x55 },
{ 0x57, 0x55 },
{ 0x58, 0x40 },
{ 0x59, 0x00 },
{ 0x5A, 0x00 },
{ 0x5B, 0x10 },
{ 0x5C, 0x09 },
{ 0x5D, 0x30 },
{ 0x5E, 0x01 },
{ 0x5F, 0x02 },
{ 0x60, 0x30 },
{ 0x61, 0x03 },
{ 0x62, 0x04 },
{ 0x63, 0x06 },
{ 0x64, 0x6A },
{ 0x65, 0x75 },
{ 0x66, 0x0F },
{ 0x67, 0xB3 },
{ 0x68, 0x0B },
{ 0x69, 0x06 },
{ 0x6A, 0x6A },
{ 0x6B, 0x10 },
{ 0x6C, 0x00 },
{ 0x6D, 0x04 },
{ 0x6E, 0x04 },
{ 0x6F, 0x88 },
{ 0x70, 0x00 },
{ 0x71, 0x00 },
{ 0x72, 0x06 },
{ 0x73, 0x7B },
{ 0x74, 0x00 },
{ 0x75, 0xBC },
{ 0x76, 0x00 },
{ 0x77, 0x05 },
{ 0x78, 0x2E },
{ 0x79, 0x00 },
{ 0x7A, 0x00 },
{ 0x7B, 0x00 },
{ 0x7C, 0x00 },
{ 0x7D, 0x03 },
{ 0x7E, 0x7B },
{ 0xE0, 0x04 },
{ 0x09, 0x10 },
{ 0x2B, 0x2B },
{ 0x2E, 0x44 },
{ 0xE0, 0x00 },
{ 0xE6, 0x02 },
{ 0xE7, 0x02 },
{ 0x35, 0x00 },
};
static inline
struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel)
{
return container_of(panel, struct ltk500hd1829, panel);
}
static int ltk500hd1829_unprepare(struct drm_panel *panel)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
if (!ctx->prepared)
return 0;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
ret);
}
/* 120ms to enter sleep mode */
msleep(120);
regulator_disable(ctx->iovcc);
regulator_disable(ctx->vcc);
ctx->prepared = false;
return 0;
}
static int ltk500hd1829_prepare(struct drm_panel *panel)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
unsigned int i;
int ret;
if (ctx->prepared)
return 0;
ret = regulator_enable(ctx->vcc);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev,
"Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev,
"Failed to enable iovcc supply: %d\n", ret);
goto disable_vcc;
}
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
/* tRW: 10us */
usleep_range(10, 20);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
/* tRT: >= 5ms */
usleep_range(5000, 6000);
for (i = 0; i < ARRAY_SIZE(init_code); i++) {
ret = mipi_dsi_generic_write(dsi, &init_code[i],
sizeof(struct ltk500hd1829_cmd));
if (ret < 0) {
DRM_DEV_ERROR(panel->dev,
"failed to write init cmds: %d\n", ret);
goto disable_iovcc;
}
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
ret);
goto disable_iovcc;
}
/* 120ms to exit sleep mode */
msleep(120);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
ret);
goto disable_iovcc;
}
ctx->prepared = true;
return 0;
disable_iovcc:
regulator_disable(ctx->iovcc);
disable_vcc:
regulator_disable(ctx->vcc);
return ret;
}
static const struct drm_display_mode default_mode = {
.hdisplay = 720,
.hsync_start = 720 + 50,
.hsync_end = 720 + 50 + 50,
.htotal = 720 + 50 + 50 + 50,
.vdisplay = 1280,
.vsync_start = 1280 + 30,
.vsync_end = 1280 + 30 + 4,
.vtotal = 1280 + 30 + 4 + 12,
.vrefresh = 60,
drm/panel-leadtek-ltk500hd1829: Fix dotclock The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2020-03-02 22:34:24 +02:00
.clock = 69217,
drm/panel: add panel driver for Leadtek LTK500HD1829 The LTK500HD1829 is 5.5" DSI display. v5: - Fix some trivial checkpatch warnings while applying (sam) changes in v4: - drop error message if backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v3: - drop one more overlooked panel->drm access Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de
2019-12-24 12:26:41 +01:00
.width_mm = 62,
.height_mm = 110,
};
static int ltk500hd1829_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
DRM_DEV_ERROR(ctx->dev, "failed to add mode %ux%ux@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
default_mode.vrefresh);
return -ENOMEM;
}
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs ltk500hd1829_funcs = {
.unprepare = ltk500hd1829_unprepare,
.prepare = ltk500hd1829_prepare,
.get_modes = ltk500hd1829_get_modes,
};
static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
{
struct ltk500hd1829 *ctx;
struct device *dev = &dsi->dev;
int ret;
ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(ctx->vcc)) {
ret = PTR_ERR(ctx->vcc);
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to request vcc regulator: %d\n",
ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to request iovcc regulator: %d\n",
ret);
return ret;
}
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
drm_panel_init(&ctx->panel, &dsi->dev, &ltk500hd1829_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void ltk500hd1829_shutdown(struct mipi_dsi_device *dsi)
{
struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
ret);
}
static int ltk500hd1829_remove(struct mipi_dsi_device *dsi)
{
struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ltk500hd1829_shutdown(dsi);
ret = mipi_dsi_detach(dsi);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
ret);
drm_panel_remove(&ctx->panel);
return 0;
}
static const struct of_device_id ltk500hd1829_of_match[] = {
{ .compatible = "leadtek,ltk500hd1829", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match);
static struct mipi_dsi_driver ltk500hd1829_driver = {
.driver = {
.name = "panel-leadtek-ltk500hd1829",
.of_match_table = ltk500hd1829_of_match,
},
.probe = ltk500hd1829_probe,
.remove = ltk500hd1829_remove,
.shutdown = ltk500hd1829_shutdown,
};
module_mipi_dsi_driver(ltk500hd1829_driver);
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
MODULE_DESCRIPTION("Leadtek LTK500HD1829 panel driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink