2005-04-17 02:20:36 +04:00
/**
* @ file cpu_buffer . h
*
2008-12-25 19:26:07 +03:00
* @ remark Copyright 2002 - 2009 OProfile authors
2005-04-17 02:20:36 +04:00
* @ remark Read the file COPYING
*
* @ author John Levon < levon @ movementarian . org >
2008-12-25 19:26:07 +03:00
* @ author Robert Richter < robert . richter @ amd . com >
2005-04-17 02:20:36 +04:00
*/
# ifndef OPROFILE_CPU_BUFFER_H
# define OPROFILE_CPU_BUFFER_H
# include <linux/types.h>
# include <linux/spinlock.h>
# include <linux/workqueue.h>
# include <linux/cache.h>
2008-04-28 13:14:15 +04:00
# include <linux/sched.h>
oprofile: port to the new ring_buffer
This patch replaces the current oprofile cpu buffer implementation
with the ring buffer provided by the tracing framework. The motivation
here is to leave the pain of implementing ring buffers to others. Oh,
no, there are more advantages. Main reason is the support of different
sample sizes that could be stored in the buffer. Use cases for this
are IBS and Cell spu profiling. Using the new ring buffer ensures
valid and complete samples and allows copying the cpu buffer stateless
without knowing its content. Second it will use generic kernel API and
also reduce code size. And hopefully, there are less bugs.
Since the new tracing ring buffer implementation uses spin locks to
protect the buffer during read/write access, it is difficult to use
the buffer in an NMI handler. In this case, writing to the buffer by
the NMI handler (x86) could occur also during critical sections when
reading the buffer. To avoid this, there are 2 buffers for independent
read and write access. Read access is in process context only, write
access only in the NMI handler. If the read buffer runs empty, both
buffers are swapped atomically. There is potentially a small window
during swapping where the buffers are disabled and samples could be
lost.
Using 2 buffers is a little bit overhead, but the solution is clear
and does not require changes in the ring buffer implementation. It can
be changed to a single buffer solution when the ring buffer access is
implemented as non-locking atomic code.
The new buffer requires more size to store the same amount of samples
because each sample includes an u32 header. Also, there is more code
to execute for buffer access. Nonetheless, the buffer implementation
is proven in the ftrace environment and worth to use also in oprofile.
Patches that changes the internal IBS buffer usage will follow.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-09 03:21:32 +03:00
# include <linux/ring_buffer.h>
2008-10-16 17:01:40 +04:00
2005-04-17 02:20:36 +04:00
struct task_struct ;
2008-10-16 17:01:40 +04:00
2005-04-17 02:20:36 +04:00
int alloc_cpu_buffers ( void ) ;
void free_cpu_buffers ( void ) ;
void start_cpu_work ( void ) ;
void end_cpu_work ( void ) ;
/* CPU buffer is composed of such entries (which are
* also used for context switch notes )
*/
struct op_sample {
unsigned long eip ;
unsigned long event ;
2008-12-25 19:26:07 +03:00
unsigned long data [ 0 ] ;
2005-04-17 02:20:36 +04:00
} ;
2008-10-16 17:01:40 +04:00
oprofile: port to the new ring_buffer
This patch replaces the current oprofile cpu buffer implementation
with the ring buffer provided by the tracing framework. The motivation
here is to leave the pain of implementing ring buffers to others. Oh,
no, there are more advantages. Main reason is the support of different
sample sizes that could be stored in the buffer. Use cases for this
are IBS and Cell spu profiling. Using the new ring buffer ensures
valid and complete samples and allows copying the cpu buffer stateless
without knowing its content. Second it will use generic kernel API and
also reduce code size. And hopefully, there are less bugs.
Since the new tracing ring buffer implementation uses spin locks to
protect the buffer during read/write access, it is difficult to use
the buffer in an NMI handler. In this case, writing to the buffer by
the NMI handler (x86) could occur also during critical sections when
reading the buffer. To avoid this, there are 2 buffers for independent
read and write access. Read access is in process context only, write
access only in the NMI handler. If the read buffer runs empty, both
buffers are swapped atomically. There is potentially a small window
during swapping where the buffers are disabled and samples could be
lost.
Using 2 buffers is a little bit overhead, but the solution is clear
and does not require changes in the ring buffer implementation. It can
be changed to a single buffer solution when the ring buffer access is
implemented as non-locking atomic code.
The new buffer requires more size to store the same amount of samples
because each sample includes an u32 header. Also, there is more code
to execute for buffer access. Nonetheless, the buffer implementation
is proven in the ftrace environment and worth to use also in oprofile.
Patches that changes the internal IBS buffer usage will follow.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-09 03:21:32 +03:00
struct op_entry {
struct ring_buffer_event * event ;
struct op_sample * sample ;
unsigned long irq_flags ;
2008-12-25 19:26:07 +03:00
unsigned long size ;
unsigned long * data ;
oprofile: port to the new ring_buffer
This patch replaces the current oprofile cpu buffer implementation
with the ring buffer provided by the tracing framework. The motivation
here is to leave the pain of implementing ring buffers to others. Oh,
no, there are more advantages. Main reason is the support of different
sample sizes that could be stored in the buffer. Use cases for this
are IBS and Cell spu profiling. Using the new ring buffer ensures
valid and complete samples and allows copying the cpu buffer stateless
without knowing its content. Second it will use generic kernel API and
also reduce code size. And hopefully, there are less bugs.
Since the new tracing ring buffer implementation uses spin locks to
protect the buffer during read/write access, it is difficult to use
the buffer in an NMI handler. In this case, writing to the buffer by
the NMI handler (x86) could occur also during critical sections when
reading the buffer. To avoid this, there are 2 buffers for independent
read and write access. Read access is in process context only, write
access only in the NMI handler. If the read buffer runs empty, both
buffers are swapped atomically. There is potentially a small window
during swapping where the buffers are disabled and samples could be
lost.
Using 2 buffers is a little bit overhead, but the solution is clear
and does not require changes in the ring buffer implementation. It can
be changed to a single buffer solution when the ring buffer access is
implemented as non-locking atomic code.
The new buffer requires more size to store the same amount of samples
because each sample includes an u32 header. Also, there is more code
to execute for buffer access. Nonetheless, the buffer implementation
is proven in the ftrace environment and worth to use also in oprofile.
Patches that changes the internal IBS buffer usage will follow.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-09 03:21:32 +03:00
} ;
2005-04-17 02:20:36 +04:00
struct oprofile_cpu_buffer {
unsigned long buffer_size ;
2008-09-05 19:12:36 +04:00
struct task_struct * last_task ;
2005-04-17 02:20:36 +04:00
int last_is_kernel ;
int tracing ;
unsigned long sample_received ;
unsigned long sample_lost_overflow ;
unsigned long backtrace_aborted ;
2007-11-15 03:58:48 +03:00
unsigned long sample_invalid_eip ;
2005-04-17 02:20:36 +04:00
int cpu ;
2006-11-22 17:57:56 +03:00
struct delayed_work work ;
2008-05-15 03:05:31 +04:00
} ;
2005-04-17 02:20:36 +04:00
2008-04-28 13:14:15 +04:00
DECLARE_PER_CPU ( struct oprofile_cpu_buffer , cpu_buffer ) ;
2005-04-17 02:20:36 +04:00
2008-12-04 18:27:00 +03:00
/*
* Resets the cpu buffer to a sane state .
*
* reset these to invalid values ; the next sample collected will
* populate the buffer with proper values to initialize the buffer
*/
2008-12-24 18:53:53 +03:00
static inline void op_cpu_buffer_reset ( int cpu )
2008-12-04 18:27:00 +03:00
{
struct oprofile_cpu_buffer * cpu_buf = & per_cpu ( cpu_buffer , cpu ) ;
cpu_buf - > last_is_kernel = - 1 ;
cpu_buf - > last_task = NULL ;
}
2005-04-17 02:20:36 +04:00
2008-12-25 19:26:07 +03:00
struct op_sample
* op_cpu_buffer_write_reserve ( struct op_entry * entry , unsigned long size ) ;
2008-12-16 18:19:54 +03:00
int op_cpu_buffer_write_commit ( struct op_entry * entry ) ;
struct op_sample * op_cpu_buffer_read_entry ( int cpu ) ;
unsigned long op_cpu_buffer_entries ( int cpu ) ;
2008-11-28 00:33:37 +03:00
2005-04-17 02:20:36 +04:00
/* transient events for the CPU buffer -> event buffer */
# define CPU_IS_KERNEL 1
# define CPU_TRACE_BEGIN 2
2008-07-22 23:08:54 +04:00
# define IBS_FETCH_BEGIN 3
# define IBS_OP_BEGIN 4
2005-04-17 02:20:36 +04:00
# endif /* OPROFILE_CPU_BUFFER_H */