2018-04-03 20:16:55 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
2011-06-13 21:52:59 +04:00
/*
* Copyright ( C ) 2011 STRATO . All rights reserved .
*/
2018-04-03 20:16:55 +03:00
# ifndef BTRFS_BACKREF_H
# define BTRFS_BACKREF_H
2011-06-13 21:52:59 +04:00
2013-01-29 10:04:50 +04:00
# include <linux/btrfs.h>
2022-10-19 17:50:49 +03:00
# include "messages.h"
2011-11-23 21:55:04 +04:00
# include "ulist.h"
2020-03-03 08:26:12 +03:00
# include "disk-io.h"
2012-06-03 16:23:23 +04:00
# include "extent_io.h"
2011-06-13 21:52:59 +04:00
btrfs: send: skip unnecessary backref iterations
When looking for a clone source for an extent, we are iterating over all
the backreferences for an extent. This is often a waste of time, because
once we find a good clone source we could stop immediately instead of
continuing backref walking, which is expensive.
Basically what happens currently is this:
1) Call iterate_extent_inodes() to iterate over all the backreferences;
2) It calls btrfs_find_all_leafs() which in turn calls the main function
to walk over backrefs and collect them - find_parent_nodes();
3) Then we collect all the references for our target data extent from the
extent tree (and delayed refs if any), add them to the rb trees,
resolve all the indirect backreferences and search for all the file
extent items in fs trees, building a list of inodes for each one of
them (struct extent_inode_elem);
4) Then back at iterate_extent_inodes() we find all the roots associated
to each found leaf, and call the callback __iterate_backrefs defined
at send.c for each inode in the inode list associated to each leaf.
Some times one the first backreferences we find in a fs tree is optimal
to satisfy the clone operation that send wants to perform, and in that
case we could stop immediately and avoid resolving all the remaining
indirect backreferences (search fs trees for the respective file extent
items, etc). This possibly if when we find a fs tree leaf with a file
extent item we are able to know what are all the roots that can lead to
the leaf - this is now possible after the previous patch in the series
that adds a cache that maps leaves to a list of roots. So we can now
shortcircuit backref walking during send, by having the callback we
pass to iterate_extent_inodes() to be called when we find a file extent
item for an indirect backreference, and have it return a special value
when it found a suitable backreference and it does not need to look for
more backreferences. This change does that.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:51 +03:00
/*
* Used by implementations of iterate_extent_inodes_t ( see definition below ) to
* signal that backref iteration can stop immediately and no error happened .
* The value must be non - negative and must not be 0 , 1 ( which is a common return
* value from things like btrfs_search_slot ( ) and used internally in the backref
* walking code ) and different from BACKREF_FOUND_SHARED and
* BACKREF_FOUND_NOT_SHARED
*/
# define BTRFS_ITERATE_EXTENT_INODES_STOP 5
/*
* Should return 0 if no errors happened and iteration of backrefs should
* continue . Can return BTRFS_ITERATE_EXTENT_INODES_STOP or any other non - zero
* value to immediately stop iteration and possibly signal an error back to
* the caller .
*/
typedef int ( iterate_extent_inodes_t ) ( u64 inum , u64 offset , u64 num_bytes ,
u64 root , void * ctx ) ;
btrfs: use a single argument for extent offset in backref walking functions
The interface for find_parent_nodes() has two extent offset related
arguments:
1) One u64 pointer argument for the extent offset;
2) One boolean argument to tell if the extent offset should be ignored or
not.
These are confusing, becase the extent offset pointer can be NULL and in
some cases callers pass a NULL value as a way to tell the backref walking
code to ignore offsets in file extent items (and simply consider all file
extent items that point to the target data extent).
The boolean argument was added in commit c995ab3cda3f ("btrfs: add a flag
to iterate_inodes_from_logical to find all extent refs for uncompressed
extents"), but it was never really necessary, it was enough if it could
find a way to get a NULL value passed to the "extent_item_pos" argument of
find_parent_nodes(). The arguments are also passed to functions called
by find_parent_nodes() and respective helper functions, which further
makes everything more complicated than needed.
Then we have several backref walking related functions that end up calling
find_parent_nodes(), either directly or through some other function that
they call, and for many we have to use an "extent_item_pos" (u64) argument
and a boolean "ignore_offset" argument too.
This is confusing and not really necessary. So use a single argument to
specify the extent offset, as a simple u64 and not as a pointer, but
using a special value of (u64)-1, defined as a documented constant, to
indicate when the extent offset should be ignored.
This is also preparation work for the upcoming patches in the series that
add other arguments to find_parent_nodes() and other related functions
that use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:46 +03:00
/*
2022-11-01 19:15:47 +03:00
* Context and arguments for backref walking functions . Some of the fields are
* to be filled by the caller of such functions while other are filled by the
* functions themselves , as described below .
btrfs: use a single argument for extent offset in backref walking functions
The interface for find_parent_nodes() has two extent offset related
arguments:
1) One u64 pointer argument for the extent offset;
2) One boolean argument to tell if the extent offset should be ignored or
not.
These are confusing, becase the extent offset pointer can be NULL and in
some cases callers pass a NULL value as a way to tell the backref walking
code to ignore offsets in file extent items (and simply consider all file
extent items that point to the target data extent).
The boolean argument was added in commit c995ab3cda3f ("btrfs: add a flag
to iterate_inodes_from_logical to find all extent refs for uncompressed
extents"), but it was never really necessary, it was enough if it could
find a way to get a NULL value passed to the "extent_item_pos" argument of
find_parent_nodes(). The arguments are also passed to functions called
by find_parent_nodes() and respective helper functions, which further
makes everything more complicated than needed.
Then we have several backref walking related functions that end up calling
find_parent_nodes(), either directly or through some other function that
they call, and for many we have to use an "extent_item_pos" (u64) argument
and a boolean "ignore_offset" argument too.
This is confusing and not really necessary. So use a single argument to
specify the extent offset, as a simple u64 and not as a pointer, but
using a special value of (u64)-1, defined as a documented constant, to
indicate when the extent offset should be ignored.
This is also preparation work for the upcoming patches in the series that
add other arguments to find_parent_nodes() and other related functions
that use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:46 +03:00
*/
2022-11-01 19:15:47 +03:00
struct btrfs_backref_walk_ctx {
/*
* The address of the extent for which we are doing backref walking .
* Can be either a data extent or a metadata extent .
*
* Must always be set by the top level caller .
*/
u64 bytenr ;
/*
* Offset relative to the target extent . This is only used for data
* extents , and it ' s meaningful because we can have file extent items
* that point only to a section of a data extent ( " bookend " extents ) ,
* and we want to filter out any that don ' t point to a section of the
* data extent containing the given offset .
*
* Must always be set by the top level caller .
*/
u64 extent_item_pos ;
/*
* If true and bytenr corresponds to a data extent , then references from
* all file extent items that point to the data extent are considered ,
* @ extent_item_pos is ignored .
*/
bool ignore_extent_item_pos ;
btrfs: fix backref walking not returning all inode refs
When using the logical to ino ioctl v2, if the flag to ignore offsets of
file extent items (BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET) is given, the
backref walking code ends up not returning references for all file offsets
of an inode that point to the given logical bytenr. This happens since
kernel 6.2, commit 6ce6ba534418 ("btrfs: use a single argument for extent
offset in backref walking functions") because:
1) It mistakenly skipped the search for file extent items in a leaf that
point to the target extent if that flag is given. Instead it should
only skip the filtering done by check_extent_in_eb() - that is, it
should not avoid the calls to that function (or find_extent_in_eb(),
which uses it).
2) It was also not building a list of inode extent elements (struct
extent_inode_elem) if we have multiple inode references for an extent
when the ignore offset flag is given to the logical to ino ioctl - it
would leave a single element, only the last one that was found.
These stem from the confusing old interface for backref walking functions
where we had an extent item offset argument that was a pointer to a u64
and another boolean argument that indicated if the offset should be
ignored, but the pointer could be NULL. That NULL case is used by
relocation, qgroup extent accounting and fiemap, simply to avoid building
the inode extent list for each reference, as it's not necessary for those
use cases and therefore avoids memory allocations and some computations.
Fix this by adding a boolean argument to the backref walk context
structure to indicate that the inode extent list should not be built,
make relocation set that argument to true and fix the backref walking
logic to skip the calls to check_extent_in_eb() and find_extent_in_eb()
only if this new argument is true, instead of 'ignore_extent_item_pos'
being true.
A test case for fstests will be added soon, to provide cover not only
for these cases but to the logical to ino ioctl in general as well, as
currently we do not have a test case for it.
Reported-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Link: https://lore.kernel.org/linux-btrfs/CAHhfkvwo=nmzrJSqZ2qMfF-rZB-ab6ahHnCD_sq9h4o8v+M7QQ@mail.gmail.com/
Fixes: 6ce6ba534418 ("btrfs: use a single argument for extent offset in backref walking functions")
CC: stable@vger.kernel.org # 6.2+
Tested-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-05-09 14:50:02 +03:00
/*
* If true and bytenr corresponds to a data extent , then the inode list
* ( each member describing inode number , file offset and root ) is not
* added to each reference added to the @ refs ulist .
*/
bool skip_inode_ref_list ;
2022-11-01 19:15:47 +03:00
/* A valid transaction handle or NULL. */
struct btrfs_trans_handle * trans ;
/*
* The file system ' s info object , can not be NULL .
*
* Must always be set by the top level caller .
*/
struct btrfs_fs_info * fs_info ;
/*
* Time sequence acquired from btrfs_get_tree_mod_seq ( ) , in case the
* caller joined the tree mod log to get a consistent view of b + trees
* while we do backref walking , or BTRFS_SEQ_LAST .
* When using BTRFS_SEQ_LAST , delayed refs are not checked and it uses
* commit roots when searching b + trees - this is a special case for
* qgroups used during a transaction commit .
*/
u64 time_seq ;
/*
* Used to collect the bytenr of metadata extents that point to the
* target extent .
*/
struct ulist * refs ;
/*
* List used to collect the IDs of the roots from which the target
* extent is accessible . Can be NULL in case the caller does not care
* about collecting root IDs .
*/
struct ulist * roots ;
btrfs: send: cache leaf to roots mapping during backref walking
During a send operation, when doing backref walking to determine which
inodes/offsets/roots we can clone from, the most repetitive and expensive
step is to map each leaf that has file extent items pointing to the target
data extent to the IDs of the roots from which the leaves are accessible,
which happens at iterate_extent_inodes(). That step requires finding every
parent node of a leaf, then the parent of each parent, and so on until we
reach a root node. So it's a naturally expensive operation, and repetitive
because each leaf can have hundreds of file extent items (for a nodesize
of 16K, that can be slightly over 200 file extent items). There's also
temporal locality, as we process all file extent items from a leave before
moving the next leaf.
This change caches the mapping of leaves to root IDs, to avoid repeating
those computations over and over again. The cache is limited to a maximum
of 128 entries, with each entry being a struct with a size of 128 bytes,
so the maximum cache size is 16K plus any nodes internally allocated by
the maple tree that is used to index pointers to those structs. The cache
is invalidated whenever we detect relocation happened since we started
filling the cache, because if relocation happened then extent buffers for
leaves and nodes of the trees used by a send operation may have been
reallocated.
This cache also allows for another important optimization that is
introduced in the next patch in the series.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:50 +03:00
/*
btrfs: send: skip unnecessary backref iterations
When looking for a clone source for an extent, we are iterating over all
the backreferences for an extent. This is often a waste of time, because
once we find a good clone source we could stop immediately instead of
continuing backref walking, which is expensive.
Basically what happens currently is this:
1) Call iterate_extent_inodes() to iterate over all the backreferences;
2) It calls btrfs_find_all_leafs() which in turn calls the main function
to walk over backrefs and collect them - find_parent_nodes();
3) Then we collect all the references for our target data extent from the
extent tree (and delayed refs if any), add them to the rb trees,
resolve all the indirect backreferences and search for all the file
extent items in fs trees, building a list of inodes for each one of
them (struct extent_inode_elem);
4) Then back at iterate_extent_inodes() we find all the roots associated
to each found leaf, and call the callback __iterate_backrefs defined
at send.c for each inode in the inode list associated to each leaf.
Some times one the first backreferences we find in a fs tree is optimal
to satisfy the clone operation that send wants to perform, and in that
case we could stop immediately and avoid resolving all the remaining
indirect backreferences (search fs trees for the respective file extent
items, etc). This possibly if when we find a fs tree leaf with a file
extent item we are able to know what are all the roots that can lead to
the leaf - this is now possible after the previous patch in the series
that adds a cache that maps leaves to a list of roots. So we can now
shortcircuit backref walking during send, by having the callback we
pass to iterate_extent_inodes() to be called when we find a file extent
item for an indirect backreference, and have it return a special value
when it found a suitable backreference and it does not need to look for
more backreferences. This change does that.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:51 +03:00
* Used by iterate_extent_inodes ( ) and the main backref walk code
* ( find_parent_nodes ( ) ) . Lookup and store functions for an optional
* cache which maps the logical address ( bytenr ) of leaves to an array
* of root IDs .
btrfs: send: cache leaf to roots mapping during backref walking
During a send operation, when doing backref walking to determine which
inodes/offsets/roots we can clone from, the most repetitive and expensive
step is to map each leaf that has file extent items pointing to the target
data extent to the IDs of the roots from which the leaves are accessible,
which happens at iterate_extent_inodes(). That step requires finding every
parent node of a leaf, then the parent of each parent, and so on until we
reach a root node. So it's a naturally expensive operation, and repetitive
because each leaf can have hundreds of file extent items (for a nodesize
of 16K, that can be slightly over 200 file extent items). There's also
temporal locality, as we process all file extent items from a leave before
moving the next leaf.
This change caches the mapping of leaves to root IDs, to avoid repeating
those computations over and over again. The cache is limited to a maximum
of 128 entries, with each entry being a struct with a size of 128 bytes,
so the maximum cache size is 16K plus any nodes internally allocated by
the maple tree that is used to index pointers to those structs. The cache
is invalidated whenever we detect relocation happened since we started
filling the cache, because if relocation happened then extent buffers for
leaves and nodes of the trees used by a send operation may have been
reallocated.
This cache also allows for another important optimization that is
introduced in the next patch in the series.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:50 +03:00
*/
bool ( * cache_lookup ) ( u64 leaf_bytenr , void * user_ctx ,
const u64 * * root_ids_ret , int * root_count_ret ) ;
void ( * cache_store ) ( u64 leaf_bytenr , const struct ulist * root_ids ,
void * user_ctx ) ;
btrfs: send: skip unnecessary backref iterations
When looking for a clone source for an extent, we are iterating over all
the backreferences for an extent. This is often a waste of time, because
once we find a good clone source we could stop immediately instead of
continuing backref walking, which is expensive.
Basically what happens currently is this:
1) Call iterate_extent_inodes() to iterate over all the backreferences;
2) It calls btrfs_find_all_leafs() which in turn calls the main function
to walk over backrefs and collect them - find_parent_nodes();
3) Then we collect all the references for our target data extent from the
extent tree (and delayed refs if any), add them to the rb trees,
resolve all the indirect backreferences and search for all the file
extent items in fs trees, building a list of inodes for each one of
them (struct extent_inode_elem);
4) Then back at iterate_extent_inodes() we find all the roots associated
to each found leaf, and call the callback __iterate_backrefs defined
at send.c for each inode in the inode list associated to each leaf.
Some times one the first backreferences we find in a fs tree is optimal
to satisfy the clone operation that send wants to perform, and in that
case we could stop immediately and avoid resolving all the remaining
indirect backreferences (search fs trees for the respective file extent
items, etc). This possibly if when we find a fs tree leaf with a file
extent item we are able to know what are all the roots that can lead to
the leaf - this is now possible after the previous patch in the series
that adds a cache that maps leaves to a list of roots. So we can now
shortcircuit backref walking during send, by having the callback we
pass to iterate_extent_inodes() to be called when we find a file extent
item for an indirect backreference, and have it return a special value
when it found a suitable backreference and it does not need to look for
more backreferences. This change does that.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:51 +03:00
/*
* If this is not NULL , then the backref walking code will call this
* for each indirect data extent reference as soon as it finds one ,
* before collecting all the remaining backrefs and before resolving
* indirect backrefs . This allows for the caller to terminate backref
* walking as soon as it finds one backref that matches some specific
* criteria . The @ cache_lookup and @ cache_store callbacks should not
* be NULL in order to use this callback .
*/
iterate_extent_inodes_t * indirect_ref_iterator ;
/*
btrfs: send: avoid double extent tree search when finding clone source
At find_extent_clone() we search twice for the extent item corresponding
to the data extent that the current file extent items points to:
1) Once with a call to extent_from_logical();
2) Once again during backref walking, through iterate_extent_inodes()
which eventually leads to find_parent_nodes() where we will search
again the extent tree for the same extent item.
The extent tree can be huge, so doing this one extra search for every
extent we want to send adds up and it's expensive.
The first call is there since the send code was introduced and it
accomplishes two things:
1) Check that the extent is flagged as a data extent in the extent tree.
But it can not be anything else, otherwise we wouldn't have a file
extent item in the send root pointing to it.
This was probably added to catch bugs in the early days where send was
yet too young and the interaction with everything else was far from
perfect;
2) Check how many direct references there are on the extent, and if
there's too many (more than SEND_MAX_EXTENT_REFS), avoid doing the
backred walking as it may take too long and slowdown send.
So improve on this by having a callback in the backref walking code that
is called when it finds the extent item in the extent tree, and have those
checks done in the callback. When the callback returns anything different
from 0, it stops the backref walking code. This way we do a single search
on the extent tree for the extent item of our data extent.
Also, before this change we were only checking the number of references on
the data extent against SEND_MAX_EXTENT_REFS, but after starting backref
walking we will end up resolving backrefs for extent buffers in the path
from a leaf having a file extent item pointing to our data extent, up to
roots of trees from which the extent buffer is accessible from, due to
shared subtrees resulting from snapshoting. We were therefore allowing for
the possibility for send taking too long due to some node in the path from
the leaf to a root node being shared too many times. After this change we
check for reference counts being greater than SEND_MAX_EXTENT_REFS for
both data extents and metadata extents.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:52 +03:00
* If this is not NULL , then the backref walking code will call this for
* each extent item it ' s meant to process before it actually starts
* processing it . If this returns anything other than 0 , then it stops
* the backref walking code immediately .
btrfs: send: skip unnecessary backref iterations
When looking for a clone source for an extent, we are iterating over all
the backreferences for an extent. This is often a waste of time, because
once we find a good clone source we could stop immediately instead of
continuing backref walking, which is expensive.
Basically what happens currently is this:
1) Call iterate_extent_inodes() to iterate over all the backreferences;
2) It calls btrfs_find_all_leafs() which in turn calls the main function
to walk over backrefs and collect them - find_parent_nodes();
3) Then we collect all the references for our target data extent from the
extent tree (and delayed refs if any), add them to the rb trees,
resolve all the indirect backreferences and search for all the file
extent items in fs trees, building a list of inodes for each one of
them (struct extent_inode_elem);
4) Then back at iterate_extent_inodes() we find all the roots associated
to each found leaf, and call the callback __iterate_backrefs defined
at send.c for each inode in the inode list associated to each leaf.
Some times one the first backreferences we find in a fs tree is optimal
to satisfy the clone operation that send wants to perform, and in that
case we could stop immediately and avoid resolving all the remaining
indirect backreferences (search fs trees for the respective file extent
items, etc). This possibly if when we find a fs tree leaf with a file
extent item we are able to know what are all the roots that can lead to
the leaf - this is now possible after the previous patch in the series
that adds a cache that maps leaves to a list of roots. So we can now
shortcircuit backref walking during send, by having the callback we
pass to iterate_extent_inodes() to be called when we find a file extent
item for an indirect backreference, and have it return a special value
when it found a suitable backreference and it does not need to look for
more backreferences. This change does that.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:51 +03:00
*/
btrfs: send: avoid double extent tree search when finding clone source
At find_extent_clone() we search twice for the extent item corresponding
to the data extent that the current file extent items points to:
1) Once with a call to extent_from_logical();
2) Once again during backref walking, through iterate_extent_inodes()
which eventually leads to find_parent_nodes() where we will search
again the extent tree for the same extent item.
The extent tree can be huge, so doing this one extra search for every
extent we want to send adds up and it's expensive.
The first call is there since the send code was introduced and it
accomplishes two things:
1) Check that the extent is flagged as a data extent in the extent tree.
But it can not be anything else, otherwise we wouldn't have a file
extent item in the send root pointing to it.
This was probably added to catch bugs in the early days where send was
yet too young and the interaction with everything else was far from
perfect;
2) Check how many direct references there are on the extent, and if
there's too many (more than SEND_MAX_EXTENT_REFS), avoid doing the
backred walking as it may take too long and slowdown send.
So improve on this by having a callback in the backref walking code that
is called when it finds the extent item in the extent tree, and have those
checks done in the callback. When the callback returns anything different
from 0, it stops the backref walking code. This way we do a single search
on the extent tree for the extent item of our data extent.
Also, before this change we were only checking the number of references on
the data extent against SEND_MAX_EXTENT_REFS, but after starting backref
walking we will end up resolving backrefs for extent buffers in the path
from a leaf having a file extent item pointing to our data extent, up to
roots of trees from which the extent buffer is accessible from, due to
shared subtrees resulting from snapshoting. We were therefore allowing for
the possibility for send taking too long due to some node in the path from
the leaf to a root node being shared too many times. After this change we
check for reference counts being greater than SEND_MAX_EXTENT_REFS for
both data extents and metadata extents.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:52 +03:00
int ( * check_extent_item ) ( u64 bytenr , const struct btrfs_extent_item * ei ,
const struct extent_buffer * leaf , void * user_ctx ) ;
2022-11-01 19:15:53 +03:00
/*
* If this is not NULL , then the backref walking code will call this for
* each extent data ref it finds ( BTRFS_EXTENT_DATA_REF_KEY keys ) before
* processing that data ref . If this callback return false , then it will
* ignore this data ref and it will never resolve the indirect data ref ,
* saving time searching for leaves in a fs tree with file extent items
* matching the data ref .
*/
bool ( * skip_data_ref ) ( u64 root , u64 ino , u64 offset , void * user_ctx ) ;
btrfs: send: avoid double extent tree search when finding clone source
At find_extent_clone() we search twice for the extent item corresponding
to the data extent that the current file extent items points to:
1) Once with a call to extent_from_logical();
2) Once again during backref walking, through iterate_extent_inodes()
which eventually leads to find_parent_nodes() where we will search
again the extent tree for the same extent item.
The extent tree can be huge, so doing this one extra search for every
extent we want to send adds up and it's expensive.
The first call is there since the send code was introduced and it
accomplishes two things:
1) Check that the extent is flagged as a data extent in the extent tree.
But it can not be anything else, otherwise we wouldn't have a file
extent item in the send root pointing to it.
This was probably added to catch bugs in the early days where send was
yet too young and the interaction with everything else was far from
perfect;
2) Check how many direct references there are on the extent, and if
there's too many (more than SEND_MAX_EXTENT_REFS), avoid doing the
backred walking as it may take too long and slowdown send.
So improve on this by having a callback in the backref walking code that
is called when it finds the extent item in the extent tree, and have those
checks done in the callback. When the callback returns anything different
from 0, it stops the backref walking code. This way we do a single search
on the extent tree for the extent item of our data extent.
Also, before this change we were only checking the number of references on
the data extent against SEND_MAX_EXTENT_REFS, but after starting backref
walking we will end up resolving backrefs for extent buffers in the path
from a leaf having a file extent item pointing to our data extent, up to
roots of trees from which the extent buffer is accessible from, due to
shared subtrees resulting from snapshoting. We were therefore allowing for
the possibility for send taking too long due to some node in the path from
the leaf to a root node being shared too many times. After this change we
check for reference counts being greater than SEND_MAX_EXTENT_REFS for
both data extents and metadata extents.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:52 +03:00
/* Context object to pass to the callbacks defined above. */
btrfs: send: cache leaf to roots mapping during backref walking
During a send operation, when doing backref walking to determine which
inodes/offsets/roots we can clone from, the most repetitive and expensive
step is to map each leaf that has file extent items pointing to the target
data extent to the IDs of the roots from which the leaves are accessible,
which happens at iterate_extent_inodes(). That step requires finding every
parent node of a leaf, then the parent of each parent, and so on until we
reach a root node. So it's a naturally expensive operation, and repetitive
because each leaf can have hundreds of file extent items (for a nodesize
of 16K, that can be slightly over 200 file extent items). There's also
temporal locality, as we process all file extent items from a leave before
moving the next leaf.
This change caches the mapping of leaves to root IDs, to avoid repeating
those computations over and over again. The cache is limited to a maximum
of 128 entries, with each entry being a struct with a size of 128 bytes,
so the maximum cache size is 16K plus any nodes internally allocated by
the maple tree that is used to index pointers to those structs. The cache
is invalidated whenever we detect relocation happened since we started
filling the cache, because if relocation happened then extent buffers for
leaves and nodes of the trees used by a send operation may have been
reallocated.
This cache also allows for another important optimization that is
introduced in the next patch in the series.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:50 +03:00
void * user_ctx ;
2022-11-01 19:15:47 +03:00
} ;
btrfs: use a single argument for extent offset in backref walking functions
The interface for find_parent_nodes() has two extent offset related
arguments:
1) One u64 pointer argument for the extent offset;
2) One boolean argument to tell if the extent offset should be ignored or
not.
These are confusing, becase the extent offset pointer can be NULL and in
some cases callers pass a NULL value as a way to tell the backref walking
code to ignore offsets in file extent items (and simply consider all file
extent items that point to the target data extent).
The boolean argument was added in commit c995ab3cda3f ("btrfs: add a flag
to iterate_inodes_from_logical to find all extent refs for uncompressed
extents"), but it was never really necessary, it was enough if it could
find a way to get a NULL value passed to the "extent_item_pos" argument of
find_parent_nodes(). The arguments are also passed to functions called
by find_parent_nodes() and respective helper functions, which further
makes everything more complicated than needed.
Then we have several backref walking related functions that end up calling
find_parent_nodes(), either directly or through some other function that
they call, and for many we have to use an "extent_item_pos" (u64) argument
and a boolean "ignore_offset" argument too.
This is confusing and not really necessary. So use a single argument to
specify the extent offset, as a simple u64 and not as a pointer, but
using a special value of (u64)-1, defined as a documented constant, to
indicate when the extent offset should be ignored.
This is also preparation work for the upcoming patches in the series that
add other arguments to find_parent_nodes() and other related functions
that use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 19:15:46 +03:00
2011-06-13 21:52:59 +04:00
struct inode_fs_paths {
struct btrfs_path * btrfs_path ;
struct btrfs_root * fs_root ;
struct btrfs_data_container * fspath ;
} ;
btrfs: speedup checking for extent sharedness during fiemap
One of the most expensive tasks performed during fiemap is to check if
an extent is shared. This task has two major steps:
1) Check if the data extent is shared. This implies checking the extent
item in the extent tree, checking delayed references, etc. If we
find the data extent is directly shared, we terminate immediately;
2) If the data extent is not directly shared (its extent item has a
refcount of 1), then it may be shared if we have snapshots that share
subtrees of the inode's subvolume b+tree. So we check if the leaf
containing the file extent item is shared, then its parent node, then
the parent node of the parent node, etc, until we reach the root node
or we find one of them is shared - in which case we stop immediately.
During fiemap we process the extents of a file from left to right, from
file offset 0 to EOF. This means that we iterate b+tree leaves from left
to right, and has the implication that we keep repeating that second step
above several times for the same b+tree path of the inode's subvolume
b+tree.
For example, if we have two file extent items in leaf X, and the path to
leaf X is A -> B -> C -> X, then when we try to determine if the data
extent referenced by the first extent item is shared, we check if the data
extent is shared - if it's not, then we check if leaf X is shared, if not,
then we check if node C is shared, if not, then check if node B is shared,
if not than check if node A is shared. When we move to the next file
extent item, after determining the data extent is not shared, we repeat
the checks for X, C, B and A - doing all the expensive searches in the
extent tree, delayed refs, etc. If we have thousands of tile extents, then
we keep repeating the sharedness checks for the same paths over and over.
On a file that has no shared extents or only a small portion, it's easy
to see that this scales terribly with the number of extents in the file
and the sizes of the extent and subvolume b+trees.
This change eliminates the repeated sharedness check on extent buffers
by caching the results of the last path used. The results can be used as
long as no snapshots were created since they were cached (for not shared
extent buffers) or no roots were dropped since they were cached (for
shared extent buffers). This greatly reduces the time spent by fiemap for
files with thousands of extents and/or large extent and subvolume b+trees.
Example performance test:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1646 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 698 milliseconds (metadata cached)
That's about 2.2x faster when no metadata is cached, and about 3x faster
when all metadata is cached. On a real filesystem with many other files,
data, directories, etc, the b+trees will be 2 or 3 levels higher,
therefore this optimization will have a higher impact.
Several reports of a slow fiemap show up often, the two Link tags below
refer to two recent reports of such slowness. This patch, together with
the next ones in the series, is meant to address that.
Link: https://lore.kernel.org/linux-btrfs/21dd32c6-f1f9-f44a-466a-e18fdc6788a7@virtuozzo.com/
Link: https://lore.kernel.org/linux-btrfs/Ysace25wh5BbLd5f@atmark-techno.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-01 16:18:28 +03:00
struct btrfs_backref_shared_cache_entry {
u64 bytenr ;
u64 gen ;
bool is_shared ;
} ;
btrfs: cache sharedness of the last few data extents during fiemap
During fiemap we process all the file extent items of an inode, by their
file offset order (left to right b+tree order), and then check if the data
extent they point at is shared or not. Until now we didn't cache those
results, we only did it for b+tree nodes/leaves since for each unique
b+tree path we have access to hundreds of file extent items. However, it
is also common to repeat checking the sharedness of a particular data
extent in a very short time window, and the cases that lead to that are
the following:
1) COW writes.
If have a file extent item like this:
[ bytenr X, offset = 0, num_bytes = 512K ]
file offset 0 512K
Then a 4K write into file offset 64K happens, we end up with the
following file extent item layout:
[ bytenr X, offset = 0, num_bytes = 64K ]
file offset 0 64K
[ bytenr Y, offset = 0, num_bytes = 4K ]
file offset 64K 68K
[ bytenr X, offset = 68K, num_bytes = 444K ]
file offset 68K 512K
So during fiemap we well check for the sharedness of the data extent
with bytenr X twice. Typically for COW writes and for at least
moderately updated files, we end up with many file extent items that
point to different sections of the same data extent.
2) Writing into a NOCOW file after a snapshot is taken.
This happens if the target extent was created in a generation older
than the generation where the last snapshot for the root (the tree the
inode belongs to) was made.
This leads to a scenario like the previous one.
3) Writing into sections of a preallocated extent.
For example if a file has the following layout:
[ bytenr X, offset = 0, num_bytes = 1M, type = prealloc ]
0 1M
After doing a 4K write into file offset 0 and another 4K write into
offset 512K, we get the following layout:
[ bytenr X, offset = 0, num_bytes = 4K, type = regular ]
0 4K
[ bytenr X, offset = 4K, num_bytes = 508K, type = prealloc ]
4K 512K
[ bytenr X, offset = 512K, num_bytes = 4K, type = regular ]
512K 516K
[ bytenr X, offset = 516K, num_bytes = 508K, type = prealloc ]
516K 1M
So we end up with 4 consecutive file extent items pointing to the data
extent at bytenr X.
4) Hole punching in the middle of an extent.
For example if a file has the following file extent item:
[ bytenr X, offset = 0, num_bytes = 8M ]
0 8M
And then hole is punched for the file range [4M, 6M[, we our file
extent item split into two:
[ bytenr X, offset = 0, num_bytes = 4M ]
0 4M
[ 2M hole, implicit or explicit depending on NO_HOLES feature ]
4M 6M
[ bytenr X, offset = 6M, num_bytes = 2M ]
6M 8M
Again, we end up with two file extent items pointing to the same
data extent.
5) When reflinking (clone and deduplication) within the same file.
This is probably the least common case of all.
In cases 1, 2, 4 and 4, when we have multiple file extent items that point
to the same data extent, their distance is usually short, typically
separated by a few slots in a b+tree leaf (or across sibling leaves). For
case 5, the distance can vary a lot, but it's typically the less common
case.
This change caches the result of the sharedness checks for data extents,
but only for the last 8 extents that we notice that our inode refers to
with multiple file extent items. Whenever we want to check if a data
extent is shared, we lookup the cache which consists of doing a linear
scan of an 8 elements array, and if we find the data extent there, we
return the result and don't check the extent tree and delayed refs.
The array/cache is small so that doing the search has no noticeable
negative impact on the performance in case we don't have file extent items
within a distance of 8 slots that point to the same data extent.
Slots in the cache/array are overwritten in a simple round robin fashion,
as that approach fits very well.
Using this simple approach with only the last 8 data extents seen is
effective as usually when multiple file extents items point to the same
data extent, their distance is within 8 slots. It also uses very little
memory and the time to cache a result or lookup the cache is negligible.
The following test was run on non-debug kernel (Debian's default kernel
config) to measure the impact in the case of COW writes (first example
given above), where we run fiemap after overwriting 33% of the blocks of
a file:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
FILE_SIZE=$((1 * 1024 * 1024 * 1024))
# Create the file full of 1M extents.
xfs_io -f -s -c "pwrite -b 1M -S 0xab 0 $FILE_SIZE" $MNT/foobar
block_count=$((FILE_SIZE / 4096))
# Overwrite about 33% of the file blocks.
overwrite_count=$((block_count / 3))
echo -e "\nOverwriting $overwrite_count 4K blocks (out of $block_count)..."
RANDOM=123
for ((i = 1; i <= $overwrite_count; i++)); do
off=$(((RANDOM % block_count) * 4096))
xfs_io -c "pwrite -S 0xcd $off 4K" $MNT/foobar > /dev/null
echo -ne "\r$i blocks overwritten..."
done
echo -e "\n"
# Unmount and mount to clear all cached metadata.
umount $MNT
mount $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds"
umount $MNT
Result before applying this patch:
fiemap took 128 milliseconds
Result after applying this patch:
fiemap took 92 milliseconds (-28.1%)
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-10-11 15:17:06 +03:00
# define BTRFS_BACKREF_CTX_PREV_EXTENTS_SIZE 8
2022-10-11 15:17:02 +03:00
struct btrfs_backref_share_check_ctx {
2022-10-11 15:17:03 +03:00
/* Ulists used during backref walking. */
struct ulist refs ;
btrfs: avoid duplicated resolution of indirect backrefs during fiemap
During fiemap, when determining if a data extent is shared or not, if we
don't find the extent is directly shared, then we need to determine if
it's shared through subtrees. For that we need to resolve the indirect
reference we found in order to figure out the path in the inode's fs tree,
which is a path starting at the fs tree's root node and going down to the
leaf that contains the file extent item that points to the data extent.
We then proceed to determine if any extent buffer in that path is shared
with other trees or not.
Currently whenever we find the data extent that a file extent item points
to is not directly shared, we always resolve the path in the fs tree, and
then check if any extent buffer in the path is shared. This is a lot of
work and when we have file extent items that belong to the same leaf, we
have the same path, so we only need to calculate it once.
This change does that, it keeps track of the current and previous leaf,
and when we find that a data extent is not directly shared, we try to
compute the fs tree path only once and then use it for every other file
extent item in the same leaf, using the existing cached path result for
the leaf as long as the cache results are valid.
This saves us from doing expensive b+tree searches in the fs tree of our
target inode, as well as other minor work.
The following test was run on a non-debug kernel (Debian's default kernel
config):
$ cat test-with-snapshots.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
# Use compression to quickly create files with a lot of extents
# (each with a size of 128K).
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 extents, each with a size of 128K.
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
# Add some more files to increase the size of the fs and extent
# trees (in the real world there's a lot of files and extents
# from other files).
xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1
xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2
xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3
# Create a snapshot so all the extents become indirectly shared
# through subtrees, with a generation less than or equals to the
# generation used to create the snapshot.
btrfs subvolume snapshot -r $MNT $MNT/snap1
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
echo
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Result before applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1204 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 729 milliseconds (metadata cached)
Result after applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 732 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 421 milliseconds (metadata cached)
That's a -46.1% total reduction for the metadata not cached case, and
a -42.2% reduction for the cached metadata case.
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-10-11 15:17:08 +03:00
/*
* The current leaf the caller of btrfs_is_data_extent_shared ( ) is at .
* Typically the caller ( at the moment only fiemap ) tries to determine
* the sharedness of data extents point by file extent items from entire
* leaves .
*/
u64 curr_leaf_bytenr ;
/*
* The previous leaf the caller was at in the previous call to
* btrfs_is_data_extent_shared ( ) . This may be the same as the current
* leaf . On the first call it must be 0.
*/
u64 prev_leaf_bytenr ;
btrfs: speedup checking for extent sharedness during fiemap
One of the most expensive tasks performed during fiemap is to check if
an extent is shared. This task has two major steps:
1) Check if the data extent is shared. This implies checking the extent
item in the extent tree, checking delayed references, etc. If we
find the data extent is directly shared, we terminate immediately;
2) If the data extent is not directly shared (its extent item has a
refcount of 1), then it may be shared if we have snapshots that share
subtrees of the inode's subvolume b+tree. So we check if the leaf
containing the file extent item is shared, then its parent node, then
the parent node of the parent node, etc, until we reach the root node
or we find one of them is shared - in which case we stop immediately.
During fiemap we process the extents of a file from left to right, from
file offset 0 to EOF. This means that we iterate b+tree leaves from left
to right, and has the implication that we keep repeating that second step
above several times for the same b+tree path of the inode's subvolume
b+tree.
For example, if we have two file extent items in leaf X, and the path to
leaf X is A -> B -> C -> X, then when we try to determine if the data
extent referenced by the first extent item is shared, we check if the data
extent is shared - if it's not, then we check if leaf X is shared, if not,
then we check if node C is shared, if not, then check if node B is shared,
if not than check if node A is shared. When we move to the next file
extent item, after determining the data extent is not shared, we repeat
the checks for X, C, B and A - doing all the expensive searches in the
extent tree, delayed refs, etc. If we have thousands of tile extents, then
we keep repeating the sharedness checks for the same paths over and over.
On a file that has no shared extents or only a small portion, it's easy
to see that this scales terribly with the number of extents in the file
and the sizes of the extent and subvolume b+trees.
This change eliminates the repeated sharedness check on extent buffers
by caching the results of the last path used. The results can be used as
long as no snapshots were created since they were cached (for not shared
extent buffers) or no roots were dropped since they were cached (for
shared extent buffers). This greatly reduces the time spent by fiemap for
files with thousands of extents and/or large extent and subvolume b+trees.
Example performance test:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1646 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 698 milliseconds (metadata cached)
That's about 2.2x faster when no metadata is cached, and about 3x faster
when all metadata is cached. On a real filesystem with many other files,
data, directories, etc, the b+trees will be 2 or 3 levels higher,
therefore this optimization will have a higher impact.
Several reports of a slow fiemap show up often, the two Link tags below
refer to two recent reports of such slowness. This patch, together with
the next ones in the series, is meant to address that.
Link: https://lore.kernel.org/linux-btrfs/21dd32c6-f1f9-f44a-466a-e18fdc6788a7@virtuozzo.com/
Link: https://lore.kernel.org/linux-btrfs/Ysace25wh5BbLd5f@atmark-techno.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-01 16:18:28 +03:00
/*
* A path from a root to a leaf that has a file extent item pointing to
* a given data extent should never exceed the maximum b + tree height .
*/
2022-10-11 15:17:02 +03:00
struct btrfs_backref_shared_cache_entry path_cache_entries [ BTRFS_MAX_LEVEL ] ;
bool use_path_cache ;
btrfs: cache sharedness of the last few data extents during fiemap
During fiemap we process all the file extent items of an inode, by their
file offset order (left to right b+tree order), and then check if the data
extent they point at is shared or not. Until now we didn't cache those
results, we only did it for b+tree nodes/leaves since for each unique
b+tree path we have access to hundreds of file extent items. However, it
is also common to repeat checking the sharedness of a particular data
extent in a very short time window, and the cases that lead to that are
the following:
1) COW writes.
If have a file extent item like this:
[ bytenr X, offset = 0, num_bytes = 512K ]
file offset 0 512K
Then a 4K write into file offset 64K happens, we end up with the
following file extent item layout:
[ bytenr X, offset = 0, num_bytes = 64K ]
file offset 0 64K
[ bytenr Y, offset = 0, num_bytes = 4K ]
file offset 64K 68K
[ bytenr X, offset = 68K, num_bytes = 444K ]
file offset 68K 512K
So during fiemap we well check for the sharedness of the data extent
with bytenr X twice. Typically for COW writes and for at least
moderately updated files, we end up with many file extent items that
point to different sections of the same data extent.
2) Writing into a NOCOW file after a snapshot is taken.
This happens if the target extent was created in a generation older
than the generation where the last snapshot for the root (the tree the
inode belongs to) was made.
This leads to a scenario like the previous one.
3) Writing into sections of a preallocated extent.
For example if a file has the following layout:
[ bytenr X, offset = 0, num_bytes = 1M, type = prealloc ]
0 1M
After doing a 4K write into file offset 0 and another 4K write into
offset 512K, we get the following layout:
[ bytenr X, offset = 0, num_bytes = 4K, type = regular ]
0 4K
[ bytenr X, offset = 4K, num_bytes = 508K, type = prealloc ]
4K 512K
[ bytenr X, offset = 512K, num_bytes = 4K, type = regular ]
512K 516K
[ bytenr X, offset = 516K, num_bytes = 508K, type = prealloc ]
516K 1M
So we end up with 4 consecutive file extent items pointing to the data
extent at bytenr X.
4) Hole punching in the middle of an extent.
For example if a file has the following file extent item:
[ bytenr X, offset = 0, num_bytes = 8M ]
0 8M
And then hole is punched for the file range [4M, 6M[, we our file
extent item split into two:
[ bytenr X, offset = 0, num_bytes = 4M ]
0 4M
[ 2M hole, implicit or explicit depending on NO_HOLES feature ]
4M 6M
[ bytenr X, offset = 6M, num_bytes = 2M ]
6M 8M
Again, we end up with two file extent items pointing to the same
data extent.
5) When reflinking (clone and deduplication) within the same file.
This is probably the least common case of all.
In cases 1, 2, 4 and 4, when we have multiple file extent items that point
to the same data extent, their distance is usually short, typically
separated by a few slots in a b+tree leaf (or across sibling leaves). For
case 5, the distance can vary a lot, but it's typically the less common
case.
This change caches the result of the sharedness checks for data extents,
but only for the last 8 extents that we notice that our inode refers to
with multiple file extent items. Whenever we want to check if a data
extent is shared, we lookup the cache which consists of doing a linear
scan of an 8 elements array, and if we find the data extent there, we
return the result and don't check the extent tree and delayed refs.
The array/cache is small so that doing the search has no noticeable
negative impact on the performance in case we don't have file extent items
within a distance of 8 slots that point to the same data extent.
Slots in the cache/array are overwritten in a simple round robin fashion,
as that approach fits very well.
Using this simple approach with only the last 8 data extents seen is
effective as usually when multiple file extents items point to the same
data extent, their distance is within 8 slots. It also uses very little
memory and the time to cache a result or lookup the cache is negligible.
The following test was run on non-debug kernel (Debian's default kernel
config) to measure the impact in the case of COW writes (first example
given above), where we run fiemap after overwriting 33% of the blocks of
a file:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
FILE_SIZE=$((1 * 1024 * 1024 * 1024))
# Create the file full of 1M extents.
xfs_io -f -s -c "pwrite -b 1M -S 0xab 0 $FILE_SIZE" $MNT/foobar
block_count=$((FILE_SIZE / 4096))
# Overwrite about 33% of the file blocks.
overwrite_count=$((block_count / 3))
echo -e "\nOverwriting $overwrite_count 4K blocks (out of $block_count)..."
RANDOM=123
for ((i = 1; i <= $overwrite_count; i++)); do
off=$(((RANDOM % block_count) * 4096))
xfs_io -c "pwrite -S 0xcd $off 4K" $MNT/foobar > /dev/null
echo -ne "\r$i blocks overwritten..."
done
echo -e "\n"
# Unmount and mount to clear all cached metadata.
umount $MNT
mount $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds"
umount $MNT
Result before applying this patch:
fiemap took 128 milliseconds
Result after applying this patch:
fiemap took 92 milliseconds (-28.1%)
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-10-11 15:17:06 +03:00
/*
* Cache the sharedness result for the last few extents we have found ,
* but only for extents for which we have multiple file extent items
* that point to them .
* It ' s very common to have several file extent items that point to the
* same extent ( bytenr ) but with different offsets and lengths . This
* typically happens for COW writes , partial writes into prealloc
* extents , NOCOW writes after snapshoting a root , hole punching or
* reflinking within the same file ( less common perhaps ) .
* So keep a small cache with the lookup results for the extent pointed
* by the last few file extent items . This cache is checked , with a
* linear scan , whenever btrfs_is_data_extent_shared ( ) is called , so
* it must be small so that it does not negatively affect performance in
* case we don ' t have multiple file extent items that point to the same
* data extent .
*/
struct {
u64 bytenr ;
bool is_shared ;
} prev_extents_cache [ BTRFS_BACKREF_CTX_PREV_EXTENTS_SIZE ] ;
/*
* The slot in the prev_extents_cache array that will be used for
* storing the sharedness result of a new data extent .
*/
int prev_extents_cache_slot ;
btrfs: speedup checking for extent sharedness during fiemap
One of the most expensive tasks performed during fiemap is to check if
an extent is shared. This task has two major steps:
1) Check if the data extent is shared. This implies checking the extent
item in the extent tree, checking delayed references, etc. If we
find the data extent is directly shared, we terminate immediately;
2) If the data extent is not directly shared (its extent item has a
refcount of 1), then it may be shared if we have snapshots that share
subtrees of the inode's subvolume b+tree. So we check if the leaf
containing the file extent item is shared, then its parent node, then
the parent node of the parent node, etc, until we reach the root node
or we find one of them is shared - in which case we stop immediately.
During fiemap we process the extents of a file from left to right, from
file offset 0 to EOF. This means that we iterate b+tree leaves from left
to right, and has the implication that we keep repeating that second step
above several times for the same b+tree path of the inode's subvolume
b+tree.
For example, if we have two file extent items in leaf X, and the path to
leaf X is A -> B -> C -> X, then when we try to determine if the data
extent referenced by the first extent item is shared, we check if the data
extent is shared - if it's not, then we check if leaf X is shared, if not,
then we check if node C is shared, if not, then check if node B is shared,
if not than check if node A is shared. When we move to the next file
extent item, after determining the data extent is not shared, we repeat
the checks for X, C, B and A - doing all the expensive searches in the
extent tree, delayed refs, etc. If we have thousands of tile extents, then
we keep repeating the sharedness checks for the same paths over and over.
On a file that has no shared extents or only a small portion, it's easy
to see that this scales terribly with the number of extents in the file
and the sizes of the extent and subvolume b+trees.
This change eliminates the repeated sharedness check on extent buffers
by caching the results of the last path used. The results can be used as
long as no snapshots were created since they were cached (for not shared
extent buffers) or no roots were dropped since they were cached (for
shared extent buffers). This greatly reduces the time spent by fiemap for
files with thousands of extents and/or large extent and subvolume b+trees.
Example performance test:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1646 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 698 milliseconds (metadata cached)
That's about 2.2x faster when no metadata is cached, and about 3x faster
when all metadata is cached. On a real filesystem with many other files,
data, directories, etc, the b+trees will be 2 or 3 levels higher,
therefore this optimization will have a higher impact.
Several reports of a slow fiemap show up often, the two Link tags below
refer to two recent reports of such slowness. This patch, together with
the next ones in the series, is meant to address that.
Link: https://lore.kernel.org/linux-btrfs/21dd32c6-f1f9-f44a-466a-e18fdc6788a7@virtuozzo.com/
Link: https://lore.kernel.org/linux-btrfs/Ysace25wh5BbLd5f@atmark-techno.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-01 16:18:28 +03:00
} ;
2022-10-11 15:17:03 +03:00
struct btrfs_backref_share_check_ctx * btrfs_alloc_backref_share_check_ctx ( void ) ;
void btrfs_free_backref_share_ctx ( struct btrfs_backref_share_check_ctx * ctx ) ;
2011-06-13 21:52:59 +04:00
int extent_from_logical ( struct btrfs_fs_info * fs_info , u64 logical ,
2012-09-08 06:01:28 +04:00
struct btrfs_path * path , struct btrfs_key * found_key ,
u64 * flags ) ;
2011-06-13 21:52:59 +04:00
int tree_backref_for_extent ( unsigned long * ptr , struct extent_buffer * eb ,
2014-06-09 06:54:07 +04:00
struct btrfs_key * key , struct btrfs_extent_item * ei ,
u32 item_size , u64 * out_root , u8 * out_level ) ;
2011-06-13 21:52:59 +04:00
2022-11-01 19:15:47 +03:00
int iterate_extent_inodes ( struct btrfs_backref_walk_ctx * ctx ,
bool search_commit_root ,
iterate_extent_inodes_t * iterate , void * user_ctx ) ;
2011-06-13 21:52:59 +04:00
int iterate_inodes_from_logical ( u64 logical , struct btrfs_fs_info * fs_info ,
2022-06-06 20:32:59 +03:00
struct btrfs_path * path , void * ctx ,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address). These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).
When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset. This prevents LOGICAL_INO from returning
references to more than a single block.
To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:
for (i = a; i < b; ++i)
extent_ref_set += LOGICAL_INO(i);
At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.
When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent. This removes
the need for the loop, since we get all the extent refs in one call.
Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.
There is no functional change in this patch. The new flag is always
false.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-22 20:58:45 +03:00
bool ignore_offset ) ;
2011-06-13 21:52:59 +04:00
int paths_from_inode ( u64 inum , struct inode_fs_paths * ipath ) ;
2022-11-01 19:15:47 +03:00
int btrfs_find_all_leafs ( struct btrfs_backref_walk_ctx * ctx ) ;
int btrfs_find_all_roots ( struct btrfs_backref_walk_ctx * ctx ,
btrfs: fix lock inversion problem when doing qgroup extent tracing
At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a
NULL value as the transaction handle argument, which makes that function
take the commit_root_sem semaphore, which is necessary when we don't hold
a transaction handle or any other mechanism to prevent a transaction
commit from wiping out commit roots.
However btrfs_qgroup_trace_extent_post() can be called in a context where
we are holding a write lock on an extent buffer from a subvolume tree,
namely from btrfs_truncate_inode_items(), called either during truncate
or unlink operations. In this case we end up with a lock inversion problem
because the commit_root_sem is a higher level lock, always supposed to be
acquired before locking any extent buffer.
Lockdep detects this lock inversion problem since we switched the extent
buffer locks from custom locks to semaphores, and when running btrfs/158
from fstests, it reported the following trace:
[ 9057.626435] ======================================================
[ 9057.627541] WARNING: possible circular locking dependency detected
[ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted
[ 9057.628961] ------------------------------------------------------
[ 9057.629867] kworker/u16:4/30781 is trying to acquire lock:
[ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.632542]
but task is already holding lock:
[ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs]
[ 9057.635255]
which lock already depends on the new lock.
[ 9057.636292]
the existing dependency chain (in reverse order) is:
[ 9057.637240]
-> #1 (&fs_info->commit_root_sem){++++}-{3:3}:
[ 9057.638138] down_read+0x46/0x140
[ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs]
[ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
[ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs]
[ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs]
[ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs]
[ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs]
[ 9057.643418] evict+0xcf/0x1d0
[ 9057.643895] do_unlinkat+0x1e9/0x300
[ 9057.644525] do_syscall_64+0x3b/0xc0
[ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 9057.645835]
-> #0 (btrfs-tree-00){++++}-{3:3}:
[ 9057.646600] __lock_acquire+0x130e/0x2210
[ 9057.647248] lock_acquire+0xd7/0x310
[ 9057.647773] down_read_nested+0x4b/0x140
[ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs]
[ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs]
[ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs]
[ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs]
[ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs]
[ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs]
[ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs]
[ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs]
[ 9057.655831] process_one_work+0x247/0x5a0
[ 9057.656425] worker_thread+0x55/0x3c0
[ 9057.656993] kthread+0x155/0x180
[ 9057.657494] ret_from_fork+0x22/0x30
[ 9057.658030]
other info that might help us debug this:
[ 9057.659064] Possible unsafe locking scenario:
[ 9057.659824] CPU0 CPU1
[ 9057.660402] ---- ----
[ 9057.660988] lock(&fs_info->commit_root_sem);
[ 9057.661581] lock(btrfs-tree-00);
[ 9057.662348] lock(&fs_info->commit_root_sem);
[ 9057.663254] lock(btrfs-tree-00);
[ 9057.663690]
*** DEADLOCK ***
[ 9057.664437] 4 locks held by kworker/u16:4/30781:
[ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0
[ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0
[ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs]
[ 9057.669017] #3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs]
[ 9057.670408]
stack backtrace:
[ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1
[ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs]
[ 9057.674258] Call Trace:
[ 9057.674588] dump_stack_lvl+0x57/0x72
[ 9057.675083] check_noncircular+0xf3/0x110
[ 9057.675611] __lock_acquire+0x130e/0x2210
[ 9057.676132] lock_acquire+0xd7/0x310
[ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.677313] ? lock_is_held_type+0xe8/0x140
[ 9057.677849] down_read_nested+0x4b/0x140
[ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs]
[ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs]
[ 9057.681083] ? _raw_spin_unlock+0x29/0x40
[ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs]
[ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs]
[ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs]
[ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs]
[ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs]
[ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs]
[ 9057.685977] ? ___ratelimit+0xa4/0x110
[ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs]
[ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs]
[ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs]
[ 9057.688649] ? lock_is_held_type+0xe8/0x140
[ 9057.689180] process_one_work+0x247/0x5a0
[ 9057.689696] worker_thread+0x55/0x3c0
[ 9057.690175] ? process_one_work+0x5a0/0x5a0
[ 9057.690731] kthread+0x155/0x180
[ 9057.691158] ? set_kthread_struct+0x40/0x40
[ 9057.691697] ret_from_fork+0x22/0x30
Fix this by making btrfs_find_all_roots() never attempt to lock the
commit_root_sem when it is called from btrfs_qgroup_trace_extent_post().
We can't just pass a non-NULL transaction handle to btrfs_find_all_roots()
from btrfs_qgroup_trace_extent_post(), because that would make backref
lookup not use commit roots and acquire read locks on extent buffers, and
therefore could deadlock when btrfs_qgroup_trace_extent_post() is called
from the btrfs_truncate_inode_items() code path which has acquired a write
lock on an extent buffer of the subvolume btree.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-21 19:31:48 +03:00
bool skip_commit_root_sem ) ;
2012-10-15 12:30:45 +04:00
char * btrfs_ref_to_path ( struct btrfs_root * fs_root , struct btrfs_path * path ,
u32 name_len , unsigned long name_off ,
struct extent_buffer * eb_in , u64 parent ,
char * dest , u32 size ) ;
2011-11-23 21:55:04 +04:00
2011-06-13 21:52:59 +04:00
struct btrfs_data_container * init_data_container ( u32 total_bytes ) ;
struct inode_fs_paths * init_ipath ( s32 total_bytes , struct btrfs_root * fs_root ,
struct btrfs_path * path ) ;
void free_ipath ( struct inode_fs_paths * ipath ) ;
2012-08-08 22:32:27 +04:00
int btrfs_find_one_extref ( struct btrfs_root * root , u64 inode_objectid ,
u64 start_off , struct btrfs_path * path ,
struct btrfs_inode_extref * * ret_extref ,
u64 * found_off ) ;
2022-10-11 15:17:01 +03:00
int btrfs_is_data_extent_shared ( struct btrfs_inode * inode , u64 bytenr ,
btrfs: skip unnecessary extent buffer sharedness checks during fiemap
During fiemap, for each file extent we find, we must check if it's shared
or not. The sharedness check starts by verifying if the extent is directly
shared (its refcount in the extent tree is > 1), and if it is not directly
shared, then we will check if every node in the subvolume b+tree leading
from the root to the leaf that has the file extent item (in reverse order),
is shared (through snapshots).
However this second step is not needed if our extent was created in a
transaction more recent than the last transaction where a snapshot of the
inode's root happened, because it can't be shared indirectly (through
shared subtrees) without a snapshot created in a more recent transaction.
So grab the generation of the extent from the extent map and pass it to
btrfs_is_data_extent_shared(), which will skip this second phase when the
generation is more recent than the root's last snapshot value. Note that
we skip this optimization if the extent map is the result of merging 2
or more extent maps, because in this case its generation is the maximum
of the generations of all merged extent maps.
The fact the we use extent maps and they can be merged despite the
underlying extents being distinct (different file extent items in the
subvolume b+tree and different extent items in the extent b+tree), can
result in some bugs when reporting shared extents. But this is a problem
of the current implementation of fiemap relying on extent maps.
One example where we get incorrect results is:
$ cat fiemap-bug.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with two 256K extents.
# Since there is no other write activity, they will be contiguous,
# and their extent maps merged, despite having two distinct extents.
xfs_io -f -c "pwrite -S 0xab 0 256K" \
-c "fsync" \
-c "pwrite -S 0xcd 256K 256K" \
-c "fsync" \
$MNT/foo
# Now clone only the second extent into another file.
xfs_io -f -c "reflink $MNT/foo 256K 0 256K" $MNT/bar
# Filefrag will report a single 512K extent, and say it's not shared.
echo
filefrag -v $MNT/foo
umount $MNT
Running the reproducer:
$ ./fiemap-bug.sh
wrote 262144/262144 bytes at offset 0
256 KiB, 64 ops; 0.0038 sec (65.479 MiB/sec and 16762.7030 ops/sec)
wrote 262144/262144 bytes at offset 262144
256 KiB, 64 ops; 0.0040 sec (61.125 MiB/sec and 15647.9218 ops/sec)
linked 262144/262144 bytes at offset 0
256 KiB, 1 ops; 0.0002 sec (1.034 GiB/sec and 4237.2881 ops/sec)
Filesystem type is: 9123683e
File size of /mnt/sdj/foo is 524288 (128 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 3328.. 3455: 128: last,eof
/mnt/sdj/foo: 1 extent found
We end up reporting that we have a single 512K that is not shared, however
we have two 256K extents, and the second one is shared. Changing the
reproducer to clone instead the first extent into file 'bar', makes us
report a single 512K extent that is shared, which is algo incorrect since
we have two 256K extents and only the first one is shared.
This is z problem that existed before this change, and remains after this
change, as it can't be easily fixed. The next patch in the series reworks
fiemap to primarily use file extent items instead of extent maps (except
for checking for delalloc ranges), with the goal of improving its
scalability and performance, but it also ends up fixing this particular
bug caused by extent map merging.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-01 16:18:29 +03:00
u64 extent_gen ,
2022-10-11 15:17:02 +03:00
struct btrfs_backref_share_check_ctx * ctx ) ;
2012-08-08 22:32:27 +04:00
2013-08-09 09:25:36 +04:00
int __init btrfs_prelim_ref_init ( void ) ;
2018-02-19 19:24:18 +03:00
void __cold btrfs_prelim_ref_exit ( void ) ;
2017-07-13 01:20:08 +03:00
struct prelim_ref {
struct rb_node rbnode ;
u64 root_id ;
struct btrfs_key key_for_search ;
int level ;
int count ;
struct extent_inode_elem * inode_list ;
u64 parent ;
u64 wanted_disk_byte ;
} ;
2020-02-13 09:11:04 +03:00
/*
* Iterate backrefs of one extent .
*
* Now it only supports iteration of tree block in commit root .
*/
struct btrfs_backref_iter {
u64 bytenr ;
struct btrfs_path * path ;
struct btrfs_fs_info * fs_info ;
struct btrfs_key cur_key ;
u32 item_ptr ;
u32 cur_ptr ;
u32 end_ptr ;
} ;
2022-10-14 16:45:37 +03:00
struct btrfs_backref_iter * btrfs_backref_iter_alloc ( struct btrfs_fs_info * fs_info ) ;
2020-02-13 09:11:04 +03:00
static inline void btrfs_backref_iter_free ( struct btrfs_backref_iter * iter )
{
if ( ! iter )
return ;
btrfs_free_path ( iter - > path ) ;
kfree ( iter ) ;
}
2020-02-13 10:04:04 +03:00
static inline struct extent_buffer * btrfs_backref_get_eb (
struct btrfs_backref_iter * iter )
{
if ( ! iter )
return NULL ;
return iter - > path - > nodes [ 0 ] ;
}
/*
* For metadata with EXTENT_ITEM key ( non - skinny ) case , the first inline data
* is btrfs_tree_block_info , without a btrfs_extent_inline_ref header .
*
* This helper determines if that ' s the case .
*/
static inline bool btrfs_backref_has_tree_block_info (
struct btrfs_backref_iter * iter )
{
if ( iter - > cur_key . type = = BTRFS_EXTENT_ITEM_KEY & &
iter - > cur_ptr - iter - > item_ptr = = sizeof ( struct btrfs_extent_item ) )
return true ;
return false ;
}
2020-02-13 09:11:04 +03:00
int btrfs_backref_iter_start ( struct btrfs_backref_iter * iter , u64 bytenr ) ;
2020-02-13 10:04:04 +03:00
int btrfs_backref_iter_next ( struct btrfs_backref_iter * iter ) ;
static inline bool btrfs_backref_iter_is_inline_ref (
struct btrfs_backref_iter * iter )
{
if ( iter - > cur_key . type = = BTRFS_EXTENT_ITEM_KEY | |
iter - > cur_key . type = = BTRFS_METADATA_ITEM_KEY )
return true ;
return false ;
}
2020-02-13 09:11:04 +03:00
static inline void btrfs_backref_iter_release ( struct btrfs_backref_iter * iter )
{
iter - > bytenr = 0 ;
iter - > item_ptr = 0 ;
iter - > cur_ptr = 0 ;
iter - > end_ptr = 0 ;
btrfs_release_path ( iter - > path ) ;
memset ( & iter - > cur_key , 0 , sizeof ( iter - > cur_key ) ) ;
}
2020-03-23 10:03:56 +03:00
/*
* Backref cache related structures
*
* The whole objective of backref_cache is to build a bi - directional map
* of tree blocks ( represented by backref_node ) and all their parents .
*/
/*
* Represent a tree block in the backref cache
*/
struct btrfs_backref_node {
2020-03-26 09:11:09 +03:00
struct {
struct rb_node rb_node ;
u64 bytenr ;
} ; /* Use rb_simple_node for search/insert */
2020-03-23 10:03:56 +03:00
u64 new_bytenr ;
/* Objectid of tree block owner, can be not uptodate */
u64 owner ;
/* Link to pending, changed or detached list */
struct list_head list ;
/* List of upper level edges, which link this node to its parents */
struct list_head upper ;
/* List of lower level edges, which link this node to its children */
struct list_head lower ;
/* NULL if this node is not tree root */
struct btrfs_root * root ;
/* Extent buffer got by COWing the block */
struct extent_buffer * eb ;
/* Level of the tree block */
unsigned int level : 8 ;
2020-05-15 09:01:40 +03:00
/* Is the block in a non-shareable tree */
2020-03-23 10:03:56 +03:00
unsigned int cowonly : 1 ;
/* 1 if no child node is in the cache */
unsigned int lowest : 1 ;
/* Is the extent buffer locked */
unsigned int locked : 1 ;
/* Has the block been processed */
unsigned int processed : 1 ;
/* Have backrefs of this block been checked */
unsigned int checked : 1 ;
/*
* 1 if corresponding block has been COWed but some upper level block
* pointers may not point to the new location
*/
unsigned int pending : 1 ;
/* 1 if the backref node isn't connected to any other backref node */
unsigned int detached : 1 ;
/*
* For generic purpose backref cache , where we only care if it ' s a reloc
* root , doesn ' t care the source subvolid .
*/
unsigned int is_reloc_root : 1 ;
} ;
# define LOWER 0
# define UPPER 1
/*
* Represent an edge connecting upper and lower backref nodes .
*/
struct btrfs_backref_edge {
/*
* list [ LOWER ] is linked to btrfs_backref_node : : upper of lower level
* node , and list [ UPPER ] is linked to btrfs_backref_node : : lower of
* upper level node .
*
* Also , build_backref_tree ( ) uses list [ UPPER ] for pending edges , before
* linking list [ UPPER ] to its upper level nodes .
*/
struct list_head list [ 2 ] ;
/* Two related nodes */
struct btrfs_backref_node * node [ 2 ] ;
} ;
struct btrfs_backref_cache {
/* Red black tree of all backref nodes in the cache */
struct rb_root rb_root ;
/* For passing backref nodes to btrfs_reloc_cow_block */
struct btrfs_backref_node * path [ BTRFS_MAX_LEVEL ] ;
/*
* List of blocks that have been COWed but some block pointers in upper
* level blocks may not reflect the new location
*/
struct list_head pending [ BTRFS_MAX_LEVEL ] ;
/* List of backref nodes with no child node */
struct list_head leaves ;
/* List of blocks that have been COWed in current transaction */
struct list_head changed ;
/* List of detached backref node. */
struct list_head detached ;
u64 last_trans ;
int nr_nodes ;
int nr_edges ;
/* List of unchecked backref edges during backref cache build */
struct list_head pending_edge ;
/* List of useless backref nodes during backref cache build */
struct list_head useless_node ;
struct btrfs_fs_info * fs_info ;
/*
* Whether this cache is for relocation
*
* Reloction backref cache require more info for reloc root compared
* to generic backref cache .
*/
unsigned int is_reloc ;
} ;
2020-03-03 08:14:41 +03:00
void btrfs_backref_init_cache ( struct btrfs_fs_info * fs_info ,
struct btrfs_backref_cache * cache , int is_reloc ) ;
2020-03-03 08:21:30 +03:00
struct btrfs_backref_node * btrfs_backref_alloc_node (
struct btrfs_backref_cache * cache , u64 bytenr , int level ) ;
2020-03-03 08:22:57 +03:00
struct btrfs_backref_edge * btrfs_backref_alloc_edge (
struct btrfs_backref_cache * cache ) ;
2020-03-03 08:14:41 +03:00
2020-03-03 08:24:06 +03:00
# define LINK_LOWER (1 << 0)
# define LINK_UPPER (1 << 1)
static inline void btrfs_backref_link_edge ( struct btrfs_backref_edge * edge ,
struct btrfs_backref_node * lower ,
struct btrfs_backref_node * upper ,
int link_which )
{
ASSERT ( upper & & lower & & upper - > level = = lower - > level + 1 ) ;
edge - > node [ LOWER ] = lower ;
edge - > node [ UPPER ] = upper ;
if ( link_which & LINK_LOWER )
list_add_tail ( & edge - > list [ LOWER ] , & lower - > upper ) ;
if ( link_which & LINK_UPPER )
list_add_tail ( & edge - > list [ UPPER ] , & upper - > lower ) ;
}
2020-03-03 08:26:12 +03:00
static inline void btrfs_backref_free_node ( struct btrfs_backref_cache * cache ,
struct btrfs_backref_node * node )
{
if ( node ) {
2021-01-14 22:02:45 +03:00
ASSERT ( list_empty ( & node - > list ) ) ;
ASSERT ( list_empty ( & node - > lower ) ) ;
ASSERT ( node - > eb = = NULL ) ;
2020-03-03 08:26:12 +03:00
cache - > nr_nodes - - ;
btrfs_put_root ( node - > root ) ;
kfree ( node ) ;
}
}
static inline void btrfs_backref_free_edge ( struct btrfs_backref_cache * cache ,
struct btrfs_backref_edge * edge )
{
if ( edge ) {
cache - > nr_edges - - ;
kfree ( edge ) ;
}
}
2020-03-03 08:35:27 +03:00
static inline void btrfs_backref_unlock_node_buffer (
struct btrfs_backref_node * node )
{
if ( node - > locked ) {
btrfs_tree_unlock ( node - > eb ) ;
node - > locked = 0 ;
}
}
static inline void btrfs_backref_drop_node_buffer (
struct btrfs_backref_node * node )
{
if ( node - > eb ) {
btrfs_backref_unlock_node_buffer ( node ) ;
free_extent_buffer ( node - > eb ) ;
node - > eb = NULL ;
}
}
/*
* Drop the backref node from cache without cleaning up its children
* edges .
*
* This can only be called on node without parent edges .
* The children edges are still kept as is .
*/
static inline void btrfs_backref_drop_node ( struct btrfs_backref_cache * tree ,
struct btrfs_backref_node * node )
{
2021-01-14 22:02:45 +03:00
ASSERT ( list_empty ( & node - > upper ) ) ;
2020-03-03 08:35:27 +03:00
btrfs_backref_drop_node_buffer ( node ) ;
2021-01-14 22:02:45 +03:00
list_del_init ( & node - > list ) ;
list_del_init ( & node - > lower ) ;
2020-03-03 08:35:27 +03:00
if ( ! RB_EMPTY_NODE ( & node - > rb_node ) )
rb_erase ( & node - > rb_node , & tree - > rb_root ) ;
btrfs_backref_free_node ( tree , node ) ;
}
2020-03-23 10:42:25 +03:00
void btrfs_backref_cleanup_node ( struct btrfs_backref_cache * cache ,
struct btrfs_backref_node * node ) ;
2020-03-03 08:55:12 +03:00
void btrfs_backref_release_cache ( struct btrfs_backref_cache * cache ) ;
2020-03-26 09:21:36 +03:00
static inline void btrfs_backref_panic ( struct btrfs_fs_info * fs_info ,
u64 bytenr , int errno )
{
btrfs_panic ( fs_info , errno ,
" Inconsistency in backref cache found at offset %llu " ,
bytenr ) ;
}
2020-03-23 11:08:34 +03:00
int btrfs_backref_add_tree_node ( struct btrfs_backref_cache * cache ,
struct btrfs_path * path ,
struct btrfs_backref_iter * iter ,
struct btrfs_key * node_key ,
struct btrfs_backref_node * cur ) ;
2020-03-23 11:14:08 +03:00
int btrfs_backref_finish_upper_links ( struct btrfs_backref_cache * cache ,
struct btrfs_backref_node * start ) ;
2020-03-23 11:57:15 +03:00
void btrfs_backref_error_cleanup ( struct btrfs_backref_cache * cache ,
struct btrfs_backref_node * node ) ;
2011-06-13 21:52:59 +04:00
# endif