iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/multi_v7_defconfig

1242 lines
29 KiB
Plaintext
Raw Normal View History

ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_SYSVIPC=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: multi_v7_defconfig: Enable cgroups This allows booting the kernel with systemd-based root file systems. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-17 11:55:07 -08:00
CONFIG_CGROUPS=y
arm: multi_v7_defconfig: Enable initrd/initramfs support Add CONFIG_BLK_DEV_INITRD to the defconfig to support initramfs and initrd. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-19 10:53:04 -07:00
CONFIG_BLK_DEV_INITRD=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_EMBEDDED=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_VIRT=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_ARCH_ACTIONS=y
ARM: multi_v7_defconfig: enable alpine platform The generic PCI driver is required for SATA device probe on Alpine platform, so it cannot be modular. Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-26 20:34:33 +02:00
CONFIG_ARCH_ALPINE=y
ARM: multi_v7_defconfig: add MACH_ARTPEC6 Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-11 17:06:20 +01:00
CONFIG_ARCH_ARTPEC=y
CONFIG_MACH_ARTPEC6=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G6=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_ARCH_AT91=y
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC Add Atmel SAMA5D2 SoC family to multi_v7 image. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 15:04:49 +02:00
CONFIG_SOC_SAMA5D2=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
ARM: multi_v7_defconfig: add sama7g5 SoC Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig. Also add it's clock timer, the PIT64B. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
2021-06-28 15:04:52 +03:00
CONFIG_SOC_SAMA7G5=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_BCM=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_ARCH_BCM_CYGNUS=y
ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2 Turn on Broadcom Hurrican 2 SoC support by default to get access to its drivers. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-28 16:15:02 -07:00
CONFIG_ARCH_BCM_HR2=y
ARM: multi_v7_defconfig: Add NSP to defconfig Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig Signed-off-by: Jon Mason <jonmason@broadcom.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-08-26 18:35:29 -04:00
CONFIG_ARCH_BCM_NSP=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_ARCH_BCM_5301X=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_21664=y
ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573 Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-29 19:57:15 -07:00
CONFIG_ARCH_BCM_23550=y
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_ARCH_BCM2835=y
ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573 Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-29 19:57:15 -07:00
CONFIG_ARCH_BCM_53573=y
ARM: multi_v7_defconfig: Enable BCM63xx Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as the serial console driver for this platform. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:26 -07:00
CONFIG_ARCH_BCM_63XX=y
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes. This patch adds machine support for the ARM-based Broadcom SoCs. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-01-16 15:00:42 -08:00
CONFIG_ARCH_BRCMSTB=y
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be used to build a basic kernel for BCM47622 booting to console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-04-13 12:26:45 -07:00
CONFIG_ARCH_BCMBCA=y
ARM: add Marvell Berlin SoCs to multi_v7_defconfig This adds the Marvell Berlin SoC family, Marvell Armada 1500 (BG2), and Marvell Armada 1500-mini (BG2CD) to the multi_v7_defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-09-09 14:09:29 +02:00
CONFIG_ARCH_BERLIN=y
CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
ARM: multi_v7_defconfig: Select CONFIG_MACH_BERLIN_BG2Q Now that we support Berlin BG2Q, select CONFIG_MACH_BERLIN_BG2Q so that we can boot BG2Q based boards like the BG2Q DMP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-21 20:39:17 +01:00
CONFIG_MACH_BERLIN_BG2Q=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 13:59:44 +03:00
CONFIG_ARCH_DIGICOLOR=y
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC This enables basic bootup support for the Airoha EN7523 SoC. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220130145116.88406-5-nbd@nbd.name Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-01-30 15:51:07 +01:00
CONFIG_ARCH_AIROHA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ARCH_EXYNOS=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_ARCH_HIGHBANK=y
ARM: config: enable ARCH_HIX5HD2 Since both ARCH_HI3xxx and ARCH_HIX5HD2 are based on Cortex A9 & they're using similiar kernel features, make them share the hi3xxx_config. And add it into multi_v7_defconfig too. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: also turn on ARCH_HISI in multi_v7] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-12 09:25:21 +08:00
CONFIG_ARCH_HISI=y
ARM: config: enable hi3xxx in multi_v7_defconfig Enable ARCH_HI3xxx in multi_v7_defconfig. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-11 15:54:52 +08:00
CONFIG_ARCH_HI3xxx=y
ARM: multi_v7_defconfig: Enable Hip01 platform Enable Hip01 platform support for multi_v7_defconfig. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-14 07:02:04 +00:00
CONFIG_ARCH_HIP01=y
ARM: config: enable hisilicon hip04 Enable CONFIG_ARCH_HIP04 in both hi3xxx_defconfig & multi_v7_defconfig. Since CONFIG_ARM_LPAE is disabled by default, only 3GB memory could be support by this defconfig. User should enable CONFIG_ARM_LPAE locally to support 16GB memory on hip04 platform. Since hip04 doesn't belong to hi3xxx series, rename hi3xxx_defconfig to hisi_defconfig. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-08-01 20:30:12 +08:00
CONFIG_ARCH_HIP04=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ARCH_HIX5HD2=y
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH Enable HPE GXP Architecture and its watchdog for base support for HPE GXP SoCs. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-16 11:33:40 -05:00
CONFIG_ARCH_HPE=y
CONFIG_ARCH_HPE_GXP=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_MXC=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 14:35:49 -03:00
CONFIG_SOC_IMX50=y
ARM: imx5: drop option MACH_IMX51_DT Since i.MX51 becomes DT only now, we can drop option MACH_IMX51_DT and just use SOC_IMX51 instead. While at it, rename imx51-dt.c to mach-imx51.c to align with the name schema of other IMX DT only platforms. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-19 13:47:43 +08:00
CONFIG_SOC_IMX51=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC Enable i.MX6SLL SoC which is already supported by mainline kernel. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-28 16:01:32 +08:00
CONFIG_SOC_IMX6SLL=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 14:35:49 -03:00
CONFIG_SOC_IMX6SX=y
ARM: multi_v7_defconfig: Select MX6UL and MX7D Let MX6UL and MX7D SoCs be selected by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 11:10:44 -03:00
CONFIG_SOC_IMX6UL=y
ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-05 14:35:49 -03:00
CONFIG_SOC_LS1021A=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_SOC_IMX7D=y
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC Enable i.MX7ULP SoC which is already supported by mainline kernel. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-28 16:01:33 +08:00
CONFIG_SOC_IMX7ULP=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SOC_VF610=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V Add and enable the Milbeaut M10V architecture. These configs select those of the clock, timer and serial driver for M10V. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-27 13:54:00 +09:00
CONFIG_ARCH_MILBEAUT=y
CONFIG_ARCH_MILBEAUT_M10V=y
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_ARCH_MMP=y
CONFIG_MACH_MMP2_DT=y
CONFIG_MACH_MMP3_DT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_39X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12 20:00:20 -07:00
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SOC_OMAP5=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12 20:00:20 -07:00
CONFIG_SOC_AM33XX=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SOC_AM43XX=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_SOC_DRA7XX=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 14:34:05 -06:00
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_MSM8X60=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_ARCH_MSM8916=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 14:34:05 -06:00
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_ROCKCHIP=y
ARM: shmobile: Introduce ARCH_RENESAS The purpose of this patch is to start the process of replacing both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS. RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer) ARM64 based SoCs. This patches only addresses 32-bit ARM based SoCs. Proposed support for the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects ARCH_SHMOBILE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-10 09:06:41 +09:00
CONFIG_ARCH_RENESAS=y
ARM: socfpga: drop ARCH_SOCFPGA Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. After conversion of all drivers to use the new ARCH_INTEL_SOCFPGA, the remaining ARM option can be removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 16:27:44 +01:00
CONFIG_ARCH_INTEL_SOCFPGA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_STM32=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
ARM: multi_v7_defconfig: enable UniPhier SoC family Add UniPhier, a new citizen in the ARM multi platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-08 13:07:12 +09:00
CONFIG_ARCH_UNIPHIER=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_U8500=y
CONFIG_ARCH_VEXPRESS=y
ARM: add TC2 PM support to multi_v7_defconfig Without this, the multi_v7_defconfig kernel cannot boot all CPUs nor do deep cpuidle power saving on a TC2 board. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-14 22:46:25 -04:00
CONFIG_ARCH_VEXPRESS_TC2_PM=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SMP=y
ARM: multi_v7_defconfig: increase the number of maximum number of CPUs to 16 The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8() DT /cpu 9 nodes greater than max cores 8, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Hisilicon HiP04 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0) [] (setup_arch) from [] (start_kernel+0x8c/0x3b4) [] (start_kernel) from [<10208074>] (0x10208074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-10 19:52:27 -08:00
CONFIG_NR_CPUS=16
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_ARM_APPENDED_DTB=y
ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT Without this, legacy platforms that can boot with a multiplatform kernel but that need the DTB to be appended, won't have a way to pass firmware-set bootargs to the kernel. This is needed to boot multi_v7_defconfig on snowball, for instance. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-16 09:01:24 -07:00
CONFIG_ARM_ATAG_DTB_COMPAT=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_KEXEC=y
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 15:28:20 +01:00
CONFIG_EFI=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_CPU_FREQ=y
cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05 13:57:41 +05:30
CONFIG_CPU_FREQ_STAT=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: multi_v7_defconfig: Enable CPUFreq governors as modules Currently only the ondemand and performance CPUFreq policy governors are enabled in multi_v7 defconfig. But the other governors are also useful for some cases, enable them to allow users change the default if needed. The options are enabled as module to keep the kernel image size minimal. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-08 15:02:10 -04:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module The schedutil CPUFreq governor could be built as a module but the change "cpufreq / sched: Pass flags to cpufreq_update_util()" made it non-modular so attempting to enable as module leads to a warning: warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-08-19 11:43:13 -04:00
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_CPUFREQ_DT=y
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ The Wandboard Quad can make use of the cpufreq support provided by the driver. Enable it and its dependency, REGULATOR_ANATOP, by default. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 21:08:12 +03:00
CONFIG_ARM_IMX6Q_CPUFREQ=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
ARM: defconfig: enable cpufreq driver for RPi This enables on both multi_v7_defconfig and bcm2835_defconfig the new firmware based clock and cpufreq drivers for the Raspberry Pi platform. In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled, the conservative governor was selected as default since it better handles the high frequency transition latency. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-06-12 20:24:58 +02:00
CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_ARM_SCMI_CPUFREQ=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_QORIQ_CPUFREQ=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_CPU_IDLE=y
ARM: config: multi_v7: Update to enable cpuidle for QCOM SoCs Update defconfig to allow cpuidle for QCOM cpus. * Enable QCOM_PM * Enable ARM_CPUIDLE Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-04-09 13:20:43 -06:00
CONFIG_ARM_CPUIDLE=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_ARM_PSCI_CPUIDLE=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_ARM_ZYNQ_CPUIDLE=y
ARM: multi_v7_defconfig: Enable CPU idle for exynos SoCs Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and Exynos5250. Enable it in default configuration to reduce energy consumption. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:00:07 +09:00
CONFIG_ARM_EXYNOS_CPUIDLE=y
ARM: multi_v7_defconfig: Enable Tegra cpuidle driver The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and it is now a proper platform driver. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-02-25 01:40:56 +03:00
CONFIG_ARM_TEGRA_CPUIDLE=y
ARM: config: multi v7: Add renamed symbols These options were renamed in recent times. Add the new name so the driver is built again, and drop the old name. POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d62054 ("PM: AVS: smartreflex Move driver to soc specific drivers"). Add the new symbol. QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver"). SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba78f ("ASoC: mmp-sspa: Add Device Tree support"). Enable that instead. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
2021-06-15 10:44:32 +09:30
CONFIG_ARM_QCOM_SPM_CPUIDLE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_KERNEL_MODE_NEON=y
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers Enable the ARM SCMI protocol and the common clock, cpufreq and sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide support for CPU frequency scaling, clock configuration and temperature and current sensors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-08 20:42:27 -08:00
CONFIG_ARM_SCMI_PROTOCOL=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_RASPBERRYPI_FIRMWARE=y
ARM: Enable Trusted Foundations for multiplatform ARM v7 Some 32-bit Tegra devices supported by the multiplatform ARM v7 default configuration ship with the Trusted Foundations firmware. Enable support for it by default. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 11:16:21 +02:00
CONFIG_TRUSTED_FOUNDATIONS=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_CRYPTO_SHA2_ARM_CE=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_AES_ARM_CE=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
CONFIG_CRYPTO_CRC32_ARM_CE=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_NET=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_PACKET=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_UNIX=y
CONFIG_INET=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 10:12:58 +02:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:27 -07:00
CONFIG_NET_DSA=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 23:31:50 +02:00
CONFIG_CAN=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_CAN_AT91=m
ARM: multi_v7_defconfig: add NXP FlexCAN IP support Enable FlexCAN support as module by default. FlexCAN can be found on various NXP designs such as the i.MX and Vybrid SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:41 +01:00
CONFIG_CAN_FLEXCAN=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_CAN_SUN4I=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_CAN_XILINXCAN=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_CAN_RCAR=m
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 23:31:50 +02:00
CONFIG_CAN_MCP251X=y
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 16:40:15 +02:00
CONFIG_BT=m
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 13:28:40 +02:00
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCM=y
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 16:40:15 +02:00
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_BT_QCOMSMD=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
CONFIG_NFC_S3FWRN5_I2C=m
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
ARM: multi_v7_defconfig: Enable CONFIG_PCIE_RCAR_HOST config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the same driver. So this patch renames CONFIG_PCIE_RCAR to CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig file. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20200826093220.10266-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-08-26 10:32:19 +01:00
CONFIG_PCIE_RCAR_HOST=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 00:39:41 -07:00
CONFIG_OMAP_OCP2SCP=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MTD=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH Enable the config options needed to access the CFI NOR FLASH on the APE6EVM board. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-01 14:01:50 +02:00
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 16:47:44 +01:00
CONFIG_MTD_RAW_NAND=y
ARM: multi_v7_defconfig: enable Denali NAND controller This NAND controller device is used on UniPhier SoCs (and I know it is also used on SoC FPGA). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-14 16:54:24 +09:00
CONFIG_MTD_NAND_DENALI_DT=y
multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI A wide variety of TI platforms support NAND via the CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this. In addition, multi_v7_defconfig supports the dm8168-evm and that supports root being on a SATA drive, so build the DM816 AHCI driver into the resulting kernel as well. Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-21 07:42:39 -04:00
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_MTD_NAND_ATMEL=y
ARM: multi_v7_defconfig: Add Marvell NAND controller support Add Marvell NAND controller support used by some Marvell Armada based boards. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-28 17:13:57 +02:00
CONFIG_MTD_NAND_MARVELL=y
ARM: multi_v7_defconfig: Enable BRCMNAND driver The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and Cygnus/iProc under mach-bcm, this is enough critical mass to enable it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-27 09:25:44 -07:00
CONFIG_MTD_NAND_BRCMNAND=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_MTD_NAND_GPMI_NAND=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_MTD_NAND_VF610_NFC=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 10:51:29 -08:00
CONFIG_MTD_NAND_DAVINCI=y
ARM: multi_v7_defconfig: add FMC2 NAND controller support This patch adds FMC2 NAND controller support used by STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-06-21 16:49:50 +02:00
CONFIG_MTD_NAND_STM32_FMC2=y
ARM: configs: multi_v7: enable PL35x NAND controller After years, linux finally got a driver for the PL35x NAND controller found on the Xilinx Zynq-7000 SoC for example. Enable support for this driver. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210616155437.27378-2-michael@walle.cc Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-16 17:54:35 +02:00
CONFIG_MTD_NAND_PL35X=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_MTD_SPI_NOR=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_SPI_ASPEED_SMC=m
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_MTD_UBI=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_BLK_DEV_LOOP=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_BLK=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_ICS932S401=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_ATMEL_SSC=m
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 14:47:50 -08:00
CONFIG_QCOM_COINCELL=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_FASTRPC=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 15:01:33 +05:30
CONFIG_PCI_ENDPOINT_TEST=m
ARM: multi_v7: enable AT24C EEPROM driver This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-15 15:10:27 -06:00
CONFIG_EEPROM_AT24=y
arm: mvebu: SATA support: mvebu_defconfig update Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-10-26 14:30:48 +02:00
CONFIG_BLK_DEV_SD=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_BLK_DEV_SR=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_ATA=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_SATA_AHCI=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SATA_AHCI_PLATFORM=y
ARM: multi_v7_defconfig: Enable Broadcom AHCI Enable the Broadcom AHCI driver and its companion PHY driver to get functional SATA3 support. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:28 -07:00
CONFIG_AHCI_BRCM=y
multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI A wide variety of TI platforms support NAND via the CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this. In addition, multi_v7_defconfig supports the dm8168-evm and that supports root being on a SATA drive, so build the DM816 AHCI driver into the resulting kernel as well. Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-21 07:42:39 -04:00
CONFIG_AHCI_DM816=y
ARM: multi_v7_defconfig: Enable ST's (S)ATA driver Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-07-22 11:39:00 +02:00
CONFIG_AHCI_ST=y
ARM: multi_v7_defconfig: Enable AHCI_IMX The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by default to make it easy to have the root filesystem on it. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 21:08:11 +03:00
CONFIG_AHCI_IMX=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_AHCI_SUNXI=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_AHCI_TEGRA=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SATA_HIGHBANK=y
arm: mvebu: SATA support: mvebu_defconfig update Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-10-26 14:30:48 +02:00
CONFIG_SATA_MV=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SATA_RCAR=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_NETDEVICES=y
ARM: defconfig: Enable ax88796c driver for Exynos boards Enable ax88796c driver for the Ethernet chip on Exynos3250-based ARTIK5 boards in exynos and multi_v7 defconfigs. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103151536.26472-6-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-03 16:15:36 +01:00
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=m
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_NET=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_NET_DSA_BCM_SF2=m
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12 20:00:20 -07:00
CONFIG_SUN4I_EMAC=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:27 -07:00
CONFIG_BCMGENET=m
ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers Add a bunch of required drivers and subsystems: - BCMA is the on-chip discoverable bus which registers a bunch of peripherals - Enable the BCM47xx watchdog driver to get working system reboot - Enable the BCM47xx NVRAM/SPROM drivers to be able to fetch MAC addresses and other variables needed for system operation - Make BGMAC (built-in Ethernet adapter) a module Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-27 16:12:32 -07:00
CONFIG_BGMAC_BCMA=y
ARM: multi_v7_defconfig: Enable BRCMSTB networking Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:27 -07:00
CONFIG_SYSTEMPORT=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MACB=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_NET_CALXEDA_XGMAC=y
ARM: configs: multi_v7: ASPEED network, gpio, FSI Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:46:03 +10:30
CONFIG_FTGMAC100=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_GIANFAR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_HIX5HD2_GMAC=y
CONFIG_E1000E=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_IGB=y
ARM: add Marvell Dove and some drivers to multi_v7 defconfig With Marvell Dove now being part of the multi_v7 family, add some Dove specific drivers to multi_v7 defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-27 22:28:05 +01:00
CONFIG_MV643XX_ETH=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_MVNETA=y
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 16:02:50 +02:00
CONFIG_PXA168_ETH=m
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 00:39:41 -07:00
CONFIG_KS8851=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_R8169=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SH_ETH=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SMSC911X=y
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-03-27 21:21:09 +09:00
CONFIG_SNI_AVE=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_STMMAC_ETH=y
synopsys: remove dwc_eth_qos driver This driver is no longer necessary since it was merged into stmmac. Acked-by: Lars Persson <larper@axis.com> Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12 09:56:18 +00:00
CONFIG_DWMAC_DWC_QOS_ETH=y
ARM: multi_v7_defconfig: enable network for BeagleBone Black BeagleBone Black uses the TI CPSW ethernet controller, enable it in the multi_v7_defconfig for testing coverage purposes. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.12
2013-12-02 00:15:29 -08:00
CONFIG_TI_CPSW=y
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot Enable networking options required for NFS boot on TI platforms, which is widely for automated test systems. - enable new TI CPSW switch driver and related NET_SWITCHDEV config - enable TI DP83867 phy - explicitly enable PTP clock support to ensure dependent networking drivers will stay built-in. vmlinux size changes: - before: text data bss dec hex filename 14703736 8024602 444976 23173314 16198c2 ./omap-arm/vmlinux - after: text data bss dec hex filename 14727271 8029150 444528 23200949 16204b5 ./omap-arm/vmlinux diff: 27635 (dec) Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201030124650.20349-1-grygorii.strashko@ti.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30 14:46:50 +02:00
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_XILINX_EMACLITE=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_BROADCOM_PHY=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_ICPLUS_PHY=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MARVELL_PHY=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_AT803X_PHY=y
multi_v7_defconfig: Make rockchip PHY built-in Enable the rockchip PHY driver for multi_v7_defconfig builds. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 21:56:41 +08:00
CONFIG_ROCKCHIP_PHY=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_DP83867_PHY=y
ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-29 19:57:14 -07:00
CONFIG_USB_BRCMSTB=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_USB_PEGASUS=y
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over USB 3.0. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-11 17:36:00 +00:00
CONFIG_USB_RTL8152=m
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 13:28:40 +02:00
CONFIG_USB_LAN78XX=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_WCN36XX=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_BRCMFMAC=m
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 16:40:15 +02:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_RT2X00=m
CONFIG_RT2800USB=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_INPUT_JOYDEV=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_INPUT_EVDEV=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_KEYBOARD_QT1070=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_KEYBOARD_PXA27x=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_KEYBOARD_SAMSUNG=m
ARM: multi_v7_defconfig: add ST Keyscan driver This patch adds KEYBOARD_ST_KEYSCAN config Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-06-27 15:34:00 +02:00
CONFIG_KEYBOARD_ST_KEYSCAN=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_KEYBOARD_SPEAR=y
ARM: multi_v7_defconfig: Build ChromeOS EC drivers as modules Since the multi_v7_defconfig is used to build an image for different platforms, the options should be enabled as module whenever possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-17 12:58:44 -03:00
CONFIG_KEYBOARD_CROS_EC=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MOUSE_PS2_ELANTECH=y
ARM: multi_v7_defconfig: Enable Cypress APA I2C Trackpad support The Cypress All Points Addressable (APA) I2C Trackpad is used in the Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so the device is supported. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:12:33 +09:00
CONFIG_MOUSE_CYAPA=m
ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads Needed in several Chromebook models such as the Tegra-based ones. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 16:40:14 +02:00
CONFIG_MOUSE_ELAN_I2C=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: multi_v7_defconfig: add generic resistive touchscreen Add generic resistive touchscreen CONFIG_TOUCHSCREEN_ADC Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 17:17:44 +03:00
CONFIG_TOUCHSCREEN_ADC=m
ARM: multi_v7_defconfig: Build Atmel maXTouch driver as a module The driver is for a trackpad device so is not needed for booting and makes more sense to have it as module to reduce the kernel image size. It was probably enabled as built-in because module autoload was not working when the I2C device was registered by OF but this got fixed in commit b7d21058b40b ("Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload") so it's safe to enable as a module now. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-16 11:08:14 -04:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enable following drivers for merged devices: - Batteries with BQ27XXX chips for Minnie boards. - Elan eKTH I2C touchscreen for Minnie boards. - GPIO charger for all Veyron boards. - Rockchip SARADC driver for all rk3288 boards. - Rockchip eFUSE driver for all rk3288 boards. - TPM security chip for all Veyron boards. - ChromeOS EC userspace interface for all chromebooks boards. - ChromeOS EC light and proximity sensors for some chromebooks. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-07 16:20:31 +01:00
CONFIG_TOUCHSCREEN_ELAN=m
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:13 +02:00
CONFIG_TOUCHSCREEN_MMS114=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_TOUCHSCREEN_WM97XX=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_TOUCHSCREEN_ST1232=m
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_TOUCHSCREEN_STMPE=y
ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) on sunxi by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 10:35:27 +08:00
CONFIG_TOUCHSCREEN_SUN4I=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_INPUT_MISC=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_INPUT_PM8941_PWRKEY=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:08 +09:00
CONFIG_INPUT_MAX77693_HAPTIC=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_INPUT_MAX8997_HAPTIC=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_INPUT_CPCAP_PWRBUTTON=m
ARM: multi_v7_defconfig: Enable RSB and AXP20X related drivers as modules axp20x support has been split into 2 parts, I2C and RSB interface variants. Update the MFD_AXP20X symbol for I2C support. Also enable SUNXI_RSB MFD_AXP20X_RSB to support RSB variants. Build these drivers as modules. Keep MFD_AXP20X enabled for now, to ease migration for automated boot farms while the patches are being merged. This should be removed in the next release. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-17 00:38:28 +08:00
CONFIG_INPUT_AXP20X_PEK=m
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards, - Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards, - Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach audiocamera shield expansion board, - Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the Koelsch and Lager boards, - Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1 boards. All of the above are modular (CEC support is an optional feature of the modular ADV7604 driver). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
2020-06-30 19:12:37 +02:00
CONFIG_INPUT_DA9063_ONKEY=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_INPUT_ADXL34X=m
ARM: multi_v7_defconfig: Enable support for STPMIC1 STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-11 15:44:16 +02:00
CONFIG_INPUT_STPMIC1_ONKEY=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_SERIAL_8250_NR_UARTS=5
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
ARM: multi_v7_defconfig: Enable serial console on RPi 3 The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC as the primary serial console of the board, so enable it in the multiplatform defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-07 02:53:09 +02:00
CONFIG_SERIAL_8250_EXTENDED=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=m
ARM: multi_v7_defconfig: Enable serial console on RPi 3 The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC as the primary serial console of the board, so enable it in the multiplatform defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-07 02:53:09 +02:00
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SERIAL_8250_DW=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SERIAL_8250_EM=y
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default We've already moved omap2plus_defconfig over to use 8250-omap instead of omap-serial driver. Let's update multi_v7_defconfig too. By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the kernel serial console to point to 8250 driver and warns about it during the boot. Users with ttyO[0123] in their /etc/inittab should update inittab to to use ttyS[0123] instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 08:46:40 -08:00
CONFIG_SERIAL_8250_OMAP=y
ARM: Add mediatek SoC UART support in defconfig Add mediatek SoC UART support in multi_v7_defconfig Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-12-26 10:55:00 +01:00
CONFIG_SERIAL_8250_MT6577=y
ARM: multi_v7_defconfig: enable UniPhier UART driver The UniPhier on-chip UART driver was merged into the mainline by commit 1a8d2903cb6a ("serial: 8250_uniphier: add UniPhier serial driver"). Enable it from multi_v7_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-10 13:53:58 +09:00
CONFIG_SERIAL_8250_UNIPHIER=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_TTYAT=y
ARM: meson: update multi_v7_defconfig This patch updates the multi_v7_defconfig with the CONFIG_* needed by the just added Meson anch. It also adds a new defconfig specifically for the Meson SoCs. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-09 22:29:15 +02:00
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-28 00:14:10 +09:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SERIAL_TEGRA=y
arm: multi_v7_defconfig: Tweaks for omap and sunxi OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12 20:00:20 -07:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 14:34:05 -06:00
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 21:11:40 +13:00
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
arm: multi_v7_defconfig: Enable Zynq UART driver Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-19 10:53:03 -07:00
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 10:12:58 +02:00
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 13:59:44 +03:00
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
ARM: multi_v7_defconfig: Fix STi support This patch adds ST serial driver (st-asc) and ICPLUS ethernet PHY to multi_v7_defconfig. All STi based SOCs use ST-ASC as default serial console, and most of the STi SOC based boards have ICPLUS external ethernet PHY. These two options makes the system boot nfs root with console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04 13:10:13 +00:00
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
ARM: configs: multi_v7: add stm32 support This patch adds stm32 support to multi_v7_defconfig Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-26 17:45:12 +01:00
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_SERIAL_OWL=y
ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 13:28:40 +02:00
CONFIG_SERIAL_DEV_BUS=y
arm: multi_v7_defconfig: Add virtio drivers To make multi_v7_defconfig really "multi", let's add virtio drivers to allow booting a default kernel as a KVM/QEMU guest. MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET and VIRTIO_CONSOLE to actually make this kernel useful in a guest. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-04 14:50:33 +00:00
CONFIG_VIRTIO_CONSOLE=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_ASPEED_KCS_IPMI_BMC=m
CONFIG_ASPEED_BT_IPMI_BMC=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ST=y
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enable following drivers for merged devices: - Batteries with BQ27XXX chips for Minnie boards. - Elan eKTH I2C touchscreen for Minnie boards. - GPIO charger for all Veyron boards. - Rockchip SARADC driver for all rk3288 boards. - Rockchip eFUSE driver for all rk3288 boards. - TPM security chip for all Veyron boards. - ChromeOS EC userspace interface for all chromebooks boards. - ChromeOS EC light and proximity sensors for some chromebooks. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-07 16:20:31 +01:00
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS_I2C_INFINEON=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_I2C_CHARDEV=y
ARM: multi_v7_defconfig: Enable GPIO-based I2C arbitration support The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook to arbitrate the access to a I2C bus by the Application Processor or a EC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:11:49 +09:00
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
ARM: config: multi v7: Enable display drivers used by Tegra devices Enable display-related drivers used by various Tegra-based tablets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-12 00:14:12 +03:00
CONFIG_I2C_MUX_GPIO=y
ARM: update multi_v7_defconfig for Tegra This patch adds the same options to multi_v7_defconfig as were added to tegra_defconfig in commit d1c912c1001f "ARM: tegra: defconfig updates". (CONFIG_POWER_RESET_AS3722 is already enabled here.) Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21 14:56:58 -06:00
CONFIG_I2C_MUX_PCA954x=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_I2C_MUX_PINCTRL=y
ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom The Renesas Lager board shall be a reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-24 11:01:31 +01:00
CONFIG_I2C_DEMUX_PINCTRL=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_I2C_ASPEED=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_I2C_AT91=m
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_I2C_BCM2835=y
ARM: multi_v7_defconfig: Enable Zynq peripheral drivers A few drivers for Zynq peripherals made it into mainline recently. Enable them in the defconfig. The following devices are enabled: - Cadence Macb Ethernet controller - Cadence I2C controller - Arasan SDHCI Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 10:04:28 -07:00
CONFIG_I2C_CADENCE=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_I2C_DAVINCI=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 13:59:44 +03:00
CONFIG_I2C_DIGICOLOR=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_I2C_EMEV2=m
ARM: multi_v7_defconfig: configure I2C driver built-in PMIC often require the I2C bus, and the PMIC regulators might be necessary to power on eMMC/SD-card or other supplies required for successful boot. Make sure I2C driver for i.MX devices is built-in. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:38 +01:00
CONFIG_I2C_IMX=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_I2C_MESON=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_I2C_MV64XXX=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_I2C_OWL=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_I2C_QCOM_CCI=m
CONFIG_I2C_QUP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_I2C_RIIC=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:15 +02:00
CONFIG_I2C_RK3X=y
ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-11-18 11:10:53 -08:00
CONFIG_I2C_S3C2410=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_I2C_SH_MOBILE=y
ARM: multi_v7_defconfig: Enable ST's I2C driver Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-02 14:23:42 +01:00
CONFIG_I2C_ST=y
ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support This patch adds STM32F7 I2C support to multi_v7_defconfig and enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on STM32MP1 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-04 14:46:55 +02:00
CONFIG_I2C_STM32F7=y
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:42 +08:00
CONFIG_I2C_SUN6I_P2WI=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_I2C_TEGRA=y
ARM: multi_v7_defconfig: enable UniPhier I2C drivers These two drivers were merged into the I2C sub-system by commit dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") and commit 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver"). Enable them from arch/arm/configs/multi_v7_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-27 11:47:13 +09:00
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_I2C_XILINX=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_I2C_RCAR=y
ARM: multi_v7_defconfig: Enable support for missing ChromeOS EC drivers Enable the needed Kconfig options to have support for the ChromeOS EC I2C transport, I2C tunnel and chardev user-space interface. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:03:05 +09:00
CONFIG_I2C_CROS_EC_TUNNEL=m
ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom The Renesas Lager board shall be a reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-24 11:01:31 +01:00
CONFIG_I2C_SLAVE_EEPROM=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SPI=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_SPI_ATMEL=m
ARM: multi_v7_defconfig: Enable BCM283x Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-05 12:49:34 +00:00
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_SPI_CADENCE=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SPI_DAVINCI=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_SPI_FSL_QUADSPI=m
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_SPI_GPIO=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_SPI_FSL_DSPI=m
ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-15 00:39:41 -07:00
CONFIG_SPI_OMAP24XX=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_SPI_ORION=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_SPI_PL022=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:15 +02:00
CONFIG_SPI_ROCKCHIP=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SPI_RSPI=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_SPI_QUP=m
ARM: multi_v7_defconfig: Enable support for Samsung S3C64XX SPI Build the spi-s3c64xx driver as a module to have support for the SPI controller in several Samsung SoCs. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-18 15:30:16 +09:00
CONFIG_SPI_S3C64XX=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
ARM: multi_v7_defconfig: enable STM32 SPI Enable the STM32 SPI driver, implemented on STM32MP1 SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-08-22 12:49:00 +02:00
CONFIG_SPI_STM32=m
ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support SPI_STM32_QSPI must be set in buildin as rootfs can be located on QSPI memory device. Link: https://lore.kernel.org/r/20191004124025.17394-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-04 14:40:25 +02:00
CONFIG_SPI_STM32_QSPI=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SPI_TEGRA114=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_SPI_TEGRA20_SFLASH=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_SPI_TEGRA20_SLINK=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_SPI_XILINX=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_SPI_SPIDEV=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 00:15:57 -06:00
CONFIG_SPMI=y
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot Enable networking options required for NFS boot on TI platforms, which is widely for automated test systems. - enable new TI CPSW switch driver and related NET_SWITCHDEV config - enable TI DP83867 phy - explicitly enable PTP clock support to ensure dependent networking drivers will stay built-in. vmlinux size changes: - before: text data bss dec hex filename 14703736 8024602 444976 23173314 16198c2 ./omap-arm/vmlinux - after: text data bss dec hex filename 14727271 8029150 444528 23200949 16204b5 ./omap-arm/vmlinux diff: 27635 (dec) Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201030124650.20349-1-grygorii.strashko@ti.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30 14:46:50 +02:00
CONFIG_PTP_1588_CLOCK=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_PINCTRL_AS3722=y
ARM: multi_v7_defconfig: enable STMFX pinctrl support This patch enables support for STMFX pinctrl. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-21 16:44:32 +02:00
CONFIG_PINCTRL_STMFX=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_PINCTRL_PALMAS=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
ARM: config: multi v7: Enable dependancies Some drivers have not been built as they gained dependencies in kconfig but those dependencies were not added to the defconfig. The MSM pinctrl drivers fell out of the defconfig as of commit be117ca32261 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a selected config"). Add PINCTRL_MSM so these stay enabled. EDAC depends on RAS, so enable it to ensure the EDAC drivers stay enabled. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-15 10:44:33 +09:30
CONFIG_PINCTRL_MSM=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 10:12:22 +01:00
CONFIG_PINCTRL_APQ8064=y
ARM: multi_v7_defconfig: fix support for APQ8084 This patch enables configs required to boot IFC6540 board with atleast a serial console. Without this patch there is no serial console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-21 19:55:20 +01:00
CONFIG_PINCTRL_APQ8084=y
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 14:47:50 -08:00
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8916=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 00:15:57 -06:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_PINCTRL_RZA2=y
ARM: configs: multi_v7: ASPEED network, gpio, FSI Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:46:03 +10:30
CONFIG_GPIO_ASPEED_SGPIO=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 10:51:29 -08:00
CONFIG_GPIO_DAVINCI=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EM=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_GPIO_MXC=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_GPIO_RCAR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_GPIO_SYSCON=y
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30 19:00:37 +09:00
CONFIG_GPIO_UNIPHIER=y
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_GPIO_PCA953X=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_GPIO_PCA953X_IRQ=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_GPIO_PCF857X=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_GPIO_TWL4030=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_RESET_QCOM_PON=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_POWER_RESET_ST=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_RMOBILE=y
ARM: multi_v7_defconfig: add ACT8945A ACT8945A is the PMIC present on the sama5d2 Xplained. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01 22:24:55 +02:00
CONFIG_BATTERY_ACT8945A=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_BATTERY_CPCAP=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_BATTERY_SBS=y
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enable following drivers for merged devices: - Batteries with BQ27XXX chips for Minnie boards. - Elan eKTH I2C touchscreen for Minnie boards. - GPIO charger for all Veyron boards. - Rockchip SARADC driver for all rk3288 boards. - Rockchip eFUSE driver for all rk3288 boards. - TPM security chip for all Veyron boards. - ChromeOS EC userspace interface for all chromebooks boards. - ChromeOS EC light and proximity sensors for some chromebooks. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-07 16:20:31 +01:00
CONFIG_BATTERY_BQ27XXX=m
ARM: multi_v7_defconfig: Enable Acer A500 drivers Enable EC controller drivers of the Acer A500 tablet. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-14 05:51:26 +03:00
CONFIG_BATTERY_ACER_A500=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_AXP20X_POWER=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_CHARGER_CPCAP=m
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_CHARGER_GPIO=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_CHARGER_MAX8997=m
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_CHARGER_MAX8998=m
ARM: defconfig: add SMB347 charger driver for p4note The Summit SMB347 charger is part of the P4Note family of devices (e.g. Samsung Galaxy Note 10.1 (GT-N8010/N8013), enable the driver in exynos and multi_v7 defconfigs. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/4f1f6a4f8200855d07f3faed80ec5cc320e40941.1643919230.git.martin.juecker@gmail.com Link: https://lore.kernel.org/r/20220316154309.436028-3-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-16 16:43:09 +01:00
CONFIG_CHARGER_SMB347=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_CHARGER_TPS65090=y
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers Enable the ARM SCMI protocol and the common clock, cpufreq and sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide support for CPU frequency scaling, clock configuration and temperature and current sensors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-08 20:42:27 -08:00
CONFIG_SENSORS_ARM_SCMI=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_SENSORS_ASPEED=m
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_SENSORS_IIO_HWMON=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_SENSORS_LM90=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_SENSORS_LM95245=y
ARM: multi_v7_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable module support for its driver and also for the needed Exynos ADC driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-15 18:32:44 +02:00
CONFIG_SENSORS_NTC_THERMISTOR=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 19:37:17 +09:00
CONFIG_SENSORS_PWM_FAN=m
ARM: multi_v7_defconfig: Enable RPi voltage sensor The patch enables the hwmon driver for the Raspberry Pi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-05-25 21:24:38 +02:00
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 19:37:17 +09:00
CONFIG_SENSORS_INA2XX=m
ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) on sunxi by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 10:35:27 +08:00
CONFIG_CPU_THERMAL=y
ARM: multi_v7_defconfig: Enable devfreq thermal integration Panfrost driver provides a devfreq driver for the Mali GPU and allows to scale GPU core frequency. Enable support for devfreq thermal integration to enable cooling of GPU thermal zone by reducing GPU core frequency. This fixes following warning during boot on Exynos5422-based Odroid XU4: panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-17 13:34:48 +01:00
CONFIG_DEVFREQ_THERMAL=y
ARM: multi_v7_defconfig: enable thermal driver for i.MX devices Enable the i.MX thermal driver required for i.MX SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:37 +01:00
CONFIG_IMX_THERMAL=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:15 +02:00
CONFIG_ROCKCHIP_THERMAL=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_RCAR_THERMAL=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_ARMADA_THERMAL=y
ARM: configs: Build BCM2711 thermal as module This builds the BCM2711 thermal driver as module for the Raspberry Pi 4. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com
2020-01-13 19:56:18 +01:00
CONFIG_BCM2711_THERMAL=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_BCM2835_THERMAL=m
CONFIG_BRCMSTB_THERMAL=m
ARM: multi_v7_defconfig: Configure in ST's Thermal Controller Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-06-05 17:06:00 +02:00
CONFIG_ST_THERMAL_MEMMAP=y
ARM: config: Enable Tegra SoC Thermal driver Enable the Tegra SoC Thermal driver that is used by Tegra124 platforms to be built as a module by default for ARM tegra_defconfig and multi_v7_defconfig builds. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-12-02 09:00:12 +00:00
CONFIG_TEGRA_SOCTHERM=m
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR Enable NVIDIA Tegra30 SoC thermal sensor driver in multi_v7_defconfig. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-14 05:51:27 +03:00
CONFIG_TEGRA30_TSENSOR=m
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_GENERIC_ADC_THERMAL=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_TSENS=y
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-03-27 21:21:09 +09:00
CONFIG_UNIPHIER_THERMAL=y
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_DA9063_WATCHDOG=m
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_XILINX_WATCHDOG=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_ARM_SP805_WATCHDOG=y
ARM: multi_v7_defconfig: add Atmel watchdog timers Add both Atmel watchdog timers to the multi_v7_defconfig. They are added as part of the kernel because it's a core piece of the system. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 17:59:18 +02:00
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_S3C2410_WATCHDOG=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DW_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=m
ARM: mvebu: Enable watchdog support in defconfig Now that we have proper support for Armada 370/XP watchdog let's enable it in mvebu_defconfig and multi_v7_defconfig. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-10 20:00:36 -03:00
CONFIG_ORION_WATCHDOG=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:39 +01:00
CONFIG_RN5T618_WATCHDOG=y
ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig Now that the reset code are part of drivers of their own, we need those in the defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-06 21:44:24 -05:00
CONFIG_SUNXI_WATCHDOG=y
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_IMX2_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ST_LPC_WATCHDOG=y
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 16:17:52 +02:00
CONFIG_TEGRA_WATCHDOG=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_WDT=m
ARM: defconfig: update multi_v7_defconfig Update the multi_v7_defconfig enabling the watchdog driver for Meson SoCs. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-09-20 19:06:52 +02:00
CONFIG_MESON_WATCHDOG=y
ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-06 14:41:44 +03:00
CONFIG_DIGICOLOR_WATCHDOG=y
ARM: multi_v7_defconfig: Enable RENESAS_WDT R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable its driver by default. It is enabled as a module to avoid increasing the kernel image size. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-02 11:43:53 +02:00
CONFIG_RENESAS_WDT=m
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards, - Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards, - Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach audiocamera shield expansion board, - Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the Koelsch and Lager boards, - Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1 boards. All of the above are modular (CEC support is an optional feature of the modular ADV7604 driver). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
2020-06-30 19:12:37 +02:00
CONFIG_RENESAS_RZAWDT=m
ARM: multi_v7_defconfig: Enable support for STPMIC1 STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-11 15:44:16 +02:00
CONFIG_STPMIC1_WATCHDOG=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_PM8916_WATCHDOG=m
ARM: multi_v7_defconfig: set bcm47xx watchdog Correct the bcm47xx watchdog option. The convention of bcm watchdogs is the _WDT suffix. Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-02 10:42:49 +01:00
CONFIG_BCM47XX_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_BCM2835_WDT=y
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog In order to get rid of bcm_defconfig, enable this driver which is needed by some Broadcom SoCs based on the Kona architecture to reboot. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-20 12:07:31 -07:00
CONFIG_BCM_KONA_WDT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_BCM7038_WDT=m
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH Enable HPE GXP Architecture and its watchdog for base support for HPE GXP SoCs. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-16 11:33:40 -05:00
CONFIG_GXP_WATCHDOG=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
ARM: multi_v7_defconfig: Enable Acer A500 drivers Enable EC controller drivers of the Acer A500 tablet. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-14 05:51:26 +03:00
CONFIG_MFD_ACER_A500_EC=m
ARM: multi_v7_defconfig: add ACT8945A ACT8945A is the PMIC present on the sama5d2 Xplained. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01 22:24:55 +02:00
CONFIG_MFD_ACT8945A=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_MFD_AS3711=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MFD_AS3722=y
ARM: multi_v7_defconfig: Add Atmel Flexcom device The Flexcom device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 15:04:50 +02:00
CONFIG_MFD_ATMEL_FLEXCOM=y
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 16:19:37 +02:00
CONFIG_MFD_ATMEL_HLCDC=m
ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-26 23:10:55 -07:00
CONFIG_MFD_BCM590XX=y
ARM: multi_v7_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:08:45 +01:00
CONFIG_MFD_AC100=y
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in The AXP20X regulator support is currently built as a module, which means it's not available until the root fs has been mounted, but the boot loader might not have enabled the required regulators, so build their drivers into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:09:31 +01:00
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_MFD_DA9063=m
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_MFD_MAX14577=y
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 13:24:24 -08:00
CONFIG_MFD_MAX77686=y
ARM: multi_v7_defconfig: Switch max77693 to module The driver can be built as a module, so use this possibility. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:54:19 +09:00
CONFIG_MFD_MAX77693=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MFD_MAX8907=y
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_MFD_MAX8997=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_MFD_MAX8998=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_MFD_CPCAP=y
mfd: qcom-pm8xxx: Clean up PM8XXX namespace The Kconfig and file naming for the PM8xxx driver is totally confusing: - Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel users depending on or selecting either at random. - A driver file named pm8921-core.c even if it is indeed used by the whole PM8xxx family of chips. - An irqchip named pm8xxx since it was (I guess) realized that the driver was generic for all pm8xxx PMICs. As I may want to add support for PM8901 this is starting to get really messy. Fix this situation by: - Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX and convert all users, including LEDs Kconfig and ARM defconfigs for qcom and multi_v7 to use that single symbol. - Renaming the driver to qcom-pm8xxx.c to fit along the two other qcom* prefixed drivers. - Rename functions withing the driver from 8921 to 8xxx to indicate it is generic. - Just drop the =m config from the pxa_defconfig, I have no clue why it is even there, it is not a Qualcomm platform. (Possibly older Kconfig noise from saveconfig.) Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-19 16:15:18 +01:00
CONFIG_MFD_PM8XXX=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 10:12:22 +01:00
CONFIG_MFD_QCOM_RPM=y
ARM: multi_v7_defconfig: Enable required QCOM SPMI/PMIC drivers This patch enables the QCOM SPMI and PMIC related drivers that are now required to boot some supported devices. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-26 00:15:57 -06:00
CONFIG_MFD_SPMI_PMIC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MFD_RK808=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:39 +01:00
CONFIG_MFD_RN5T618=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-28 00:14:10 +09:00
CONFIG_MFD_SEC_CORE=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_MFD_STMPE=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
ARM: multi_v7_defconfig: enable TPS65217 regulator Enable TPS65217 regulator to have rootfs in MMC for Beagle Bone's. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-11-11 12:39:13 +05:30
CONFIG_MFD_TPS65217=y
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 Enable PMIC for AM437x platforms such as AM437x-sk similar to commit a186cf10da84 ("ARM: omap2plus_defconfig: enable TPS65218 configs"). This allows multi_v7_defconfig to boot up on AM437x-sk platform. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 12:42:59 -06:00
CONFIG_MFD_TPS65218=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:22:01 +01:00
CONFIG_MFD_STM32_LPTIMER=m
ARM: multi_v7_defconfig: Enable support for STPMIC1 STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-11 15:44:16 +02:00
CONFIG_MFD_STPMIC1=y
ARM: multi_v7_defconfig: Enable common regulators for rockchip boards Rockchip boards seem to have two common regulator setups. Various board used the Active Semi act8846 often in combination with Silergy syr82x regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc), while others use regulator part of the Rockchip RK808 chip (e.g. the various Veyron based chromebooks, Chipspark Popmetal etc) Enable all these regulators. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:16 +02:00
CONFIG_REGULATOR_ACT8865=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_REGULATOR_ACT8945A=y
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ The Wandboard Quad can make use of the cpufreq support provided by the driver. Enable it and its dependency, REGULATOR_ANATOP, by default. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-07-11 21:08:12 +03:00
CONFIG_REGULATOR_ANATOP=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_REGULATOR_AB8500=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_REGULATOR_AS3711=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_AS3722=y
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in The AXP20X regulator support is currently built as a module, which means it's not available until the root fs has been mounted, but the boot loader might not have enabled the required regulators, so build their drivers into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:09:31 +01:00
CONFIG_REGULATOR_AXP20X=y
ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-26 23:10:55 -07:00
CONFIG_REGULATOR_BCM590XX=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_REGULATOR_CPCAP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_REGULATOR_DA9210=y
ARM: multi_v7_defconfig: Enable common regulators for rockchip boards Rockchip boards seem to have two common regulator setups. Various board used the Active Semi act8846 often in combination with Silergy syr82x regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc), while others use regulator part of the Rockchip RK808 chip (e.g. the various Veyron based chromebooks, Chipspark Popmetal etc) Enable all these regulators. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:16 +02:00
CONFIG_REGULATOR_FAN53555=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_GPIO=y
ARM: multi_v7_defconfig: Enable LP872x regulator support The LP872x regulator is used in the LG Optimus Black codename sniper to supply the external mmc card. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-28 13:39:45 +01:00
CONFIG_REGULATOR_LP872X=y
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_REGULATOR_MAX14577=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_MAX8907=y
ARM: multi_v7_defconfig: Add MAX8952 regulator driver Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 11:09:51 +01:00
CONFIG_REGULATOR_MAX8952=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_REGULATOR_MAX8973=y
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_REGULATOR_MAX8997=m
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_REGULATOR_MAX8998=m
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 13:24:24 -08:00
CONFIG_REGULATOR_MAX77686=y
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_REGULATOR_MAX77693=m
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in Maxim 77802 PMIC is a main PMIC for the following Exynos5 based boards: Odroid XU, Chromebook Pit and Chromebook Pi. Driver for its voltage regulator is needed very early during boot to properly instantiate SD/MMC devices and mount rootfs, so change that driver to be compiled-in. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-30 15:04:16 +02:00
CONFIG_REGULATOR_MAX77802=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_PALMAS=y
ARM: multi_v7_defconfig: Enable PBIAS regulator PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4, OMAP5 and DRA7 SoCs. Enable it here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-09-04 17:43:15 +05:30
CONFIG_REGULATOR_PBIAS=y
ARM: multi_v7_defconfig: Enable support for PWM Regulators Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-06-11 09:39:21 +01:00
CONFIG_REGULATOR_PWM=y
ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs This patch adds few missing essential configs in the multi_v7_defconf, absense of some configs like PINCTRL_APQ8064 would prevent the board from getting access to serial. cc: Kevin Hilman <khilman@kernel.org> cc: Tyler Baker <tyler.baker@linaro.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-05 10:12:22 +01:00
CONFIG_REGULATOR_QCOM_RPM=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_REGULATOR_RK808=y
ARM: multi_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:39 +01:00
CONFIG_REGULATOR_RN5T618=y
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_REGULATOR_S2MPA01=m
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-28 00:14:10 +09:00
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
ARM: multi_v7_defconfig: enable STM32 booster regulator This enables the driver for STM32 booster regulator found on stm32mp1. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-01 10:14:24 +02:00
CONFIG_REGULATOR_STM32_BOOSTER=m
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:22:01 +01:00
CONFIG_REGULATOR_STM32_VREFBUF=m
ARM: multi_v7_defconfig: enable STM32 PWR regulator This enables the driver for STM32 PWR regulators found on stm32mp1. Link: https://lore.kernel.org/r/20200109125531.13610-1-alexandre.torgue@st.com Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-09 13:55:31 +01:00
CONFIG_REGULATOR_STM32_PWR=y
ARM: multi_v7_defconfig: Enable support for STPMIC1 STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-11 15:44:16 +02:00
CONFIG_REGULATOR_STPMIC1=y
ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators ABB and PBIAS are internal LDO control regulators that are needed for maintaining proper functionality of OMAP architecture SoCs. Enable the same. PBIAS is already enabled, so just enable ABB regulator as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 12:43:00 -06:00
CONFIG_REGULATOR_TI_ABB=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_TPS65090=y
ARM: multi_v7_defconfig: enable TPS65217 regulator Enable TPS65217 regulator to have rootfs in MMC for Beagle Bone's. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-11-11 12:39:13 +05:30
CONFIG_REGULATOR_TPS65217=y
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 Enable PMIC for AM437x platforms such as AM437x-sk similar to commit a186cf10da84 ("ARM: omap2plus_defconfig: enable TPS65218 configs"). This allows multi_v7_defconfig to boot up on AM437x-sk platform. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14 12:42:59 -06:00
CONFIG_REGULATOR_TPS65218=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:13 +02:00
CONFIG_REGULATOR_WM8994=m
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_CEC_SAMSUNG_S5P=m
CONFIG_CEC_STM32=m
ARM: multi_v7_defconfig: Make media support modular Make media support modular to reduce kernel size (-253 KiB): text data bss dec hex filename 12451039 1396476 339800 14187315 d87b33 vmlinux.before 12202692 1387244 338456 13928392 d487c8 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:39 +02:00
CONFIG_MEDIA_SUPPORT=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_MEDIA_USB_SUPPORT=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_USB_VIDEO_CLASS=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_VIDEO_MMP_CAMERA=m
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_VIDEO_ASPEED=m
STM32 defconfig updates for v4.19, round 1 Highlights: ---------- In multi_v7_defconfig, add support of: -STM32 RTC -STM32 DMA, DMAMUX and MDMA -STM32 DCMI media -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJbSKlMAAoJEH+ayWryHnCFvioQAI7dxJq7aQch9Is+xLULroR+ kSk5KkJqACcAXCZYQDsucmNtzPcz1HRu86t+u68Cb1W/lP99EczOz1d55o5XH4SL IHpRy/ouQB2kK+C1SXVVPhKI4/xafcNHwI+knvxFoaard/Q8t6x0UVwhm3osdP1T OF1lw7zP2i64DxJ3lDU5N93Lu6QPVHZwKJ7ayvxnx/S1FI4LpkhJV+qln2e6aSUg n94fltB/1dw5qSrGdFbSLU3QtaxAbLwUyAjxRB9GzrSUvtAMKdCQLTKF7QidgTY2 LaGPqd2K7R/i6djSLeFlU2QS+JYKpIiOVyTNwYl18gmuOCpd5o4IsRjmJqh0BARh 80cvB5klLFcItA2kMUnyV4IEc3fKEviIUgUEQJ0i09YCwC2G1rqiimsW9HUA1RB6 3nrHU3UWEJPQAR9EOYHcIzOm5EaDvIwXQnG3XHfQriaa5Shp2U+C9jjhKrAn08Kf zQlNTN2Z+g4wjG+izo/Fn60lCh9QGJUSJwqNVw286vhBAA/E5ebQyd6p4KHN71fs fDXjRC5hz5AMlOOnK+AzkspGcVrfojAPNgwfi8fRN88dxuoNApKjTRdT5u41evLr t2EniyKKQqC2K4ampAGOpoo0gunSnVO5gcgG3aBbvOip5YR9NT/epSbyznfOqZ0x SqQ5tmwCy82L2n3gMx+k =lU0N -----END PGP SIGNATURE----- Merge tag 'stm32-defconfig-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig STM32 defconfig updates for v4.19, round 1 Highlights: ---------- In multi_v7_defconfig, add support of: -STM32 RTC -STM32 DMA, DMAMUX and MDMA -STM32 DCMI media * tag 'stm32-defconfig-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: multi_v7_defconfig: enable STM32 DCMI media support ARM: multi_v7_defconfig: enable STM32 DMAv2, DMAMUX and MDMA ARM: multi_v7_defconfig: enable STM32 RTC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-14 14:38:11 -07:00
CONFIG_VIDEO_STM32_DCMI=m
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards, - Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards, - Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach audiocamera shield expansion board, - Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the Koelsch and Lager boards, - Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1 boards. All of the above are modular (CEC support is an optional feature of the modular ADV7604 driver). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
2020-06-30 19:12:37 +02:00
CONFIG_VIDEO_RENESAS_CEU=m
ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 09:29:40 -04:00
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_VIDEO_RCAR_VIN=m
ARM: multi_v7_defconfig: add atmel video pipeline modules Add drivers for the atmel video capture pipeline: atmel isc, xisc and microchip csi2dc. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220503095127.48710-6-eugen.hristev@microchip.com
2022-05-03 12:51:27 +03:00
CONFIG_VIDEO_ATMEL_ISC=m
CONFIG_VIDEO_ATMEL_XISC=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_VIDEO_ATMEL_ISI=m
ARM: multi_v7_defconfig: add atmel video pipeline modules Add drivers for the atmel video capture pipeline: atmel isc, xisc and microchip csi2dc. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220503095127.48710-6-eugen.hristev@microchip.com
2022-05-03 12:51:27 +03:00
CONFIG_VIDEO_MICROCHIP_CSI2DC=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 09:29:40 -04:00
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
ARM: multi_v7_defconfig: Enable Exynos MFC driver as module Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that can be used to {en,de}code video streams by hardware. Enable support for its driver as a module so the MFC can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-10 17:07:28 -04:00
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
ARM: multi_v7_defconfig: Enable exynos-gsc driver as module Exynos5 SoCs have a General SCALER (GSCALER) IP block that can be used to do video streams scaling and color space conversions by hardware. Enable support for its driver as a module so the GSCALER can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-10-05 11:24:29 -03:00
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-06-21 15:57:04 +02:00
CONFIG_VIDEO_STI_BDISP=m
ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver Enable HVA (Hardware Video Accelerator) video encoder driver for STMicroelectronics SoC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-11-23 09:25:23 +01:00
CONFIG_VIDEO_STI_HVA=m
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support Enables support of STMicroelectronics STiH4xx SoC series DELTA multi-format video decoder V4L2 driver. Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-02 12:59:46 -02:00
CONFIG_VIDEO_STI_DELTA=m
ARM: multi_v7_defconfig: Enable VIDEO_RENESAS_FDP1 R-Car Gen2 (and RZ/G1) SoCs have a Fine Display Processor, hence enable support for it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-31 11:16:18 +02:00
CONFIG_VIDEO_RENESAS_FDP1=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_VIDEO_RENESAS_JPU=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_VIDEO_RENESAS_VSP1=m
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver Enable NVIDIA Tegra V4L2 video decoder driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-20 23:46:23 +03:00
CONFIG_VIDEO_TEGRA_VDE=m
ARM: multi_v7_defconfig: Enable vivid driver as a module The Virtual Video Test Driver can be used to emulate video capture and output devices so it's very useful for testing. Since is not necessary to boot, can be enabled as module to avoid increasing the kernel size. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-24 09:10:13 -04:00
CONFIG_V4L_TEST_DRIVERS=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_VIDEO_VIVID=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_VIDEO_ADV7180=m
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards, - Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards, - Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach audiocamera shield expansion board, - Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the Koelsch and Lager boards, - Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1 boards. All of the above are modular (CEC support is an optional feature of the modular ADV7604 driver). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
2020-06-30 19:12:37 +02:00
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7604_CEC=y
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 13:14:21 +01:00
CONFIG_VIDEO_ML86V7667=m
ARM: multi_v7_defconfig: enable drm imx support It will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-24 09:43:49 +01:00
CONFIG_IMX_IPUV3_CORE=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_DRM=y
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 16:17:52 +02:00
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig The BeagleBone Black supports audio over HDMI, using a combination of the DaVinci McASP (used for audio by a very large proportion of DaVinci systems with audio support) and a TDA998x device driving the HDMI link (this is a very widely used driver). Build both drivers as modules in multi_v7_defconfig so they can be more easily included in testing. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06 23:26:46 +01:00
CONFIG_DRM_I2C_NXP_TDA998X=m
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 16:17:52 +02:00
CONFIG_DRM_NOUVEAU=m
ARM: multi_v7_defconfig: Enable options for Exynos display support Many Exynos devices have devices attached to their display ports. This patch enables the needed Kconfig options to support different configuration such as simple panel, embedded DisplayPort (eDP) to LVDS bridges and HDMI displays. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:10:05 +09:00
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_FIMD=y
ARM: multi_v7_defconfig: Enable Exynos DRM Mixer driver Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433 HDMI does not require Mixer and there are separate options to select Mixer and HDMI. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-29 15:25:06 +01:00
CONFIG_DRM_EXYNOS_MIXER=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_DRM_EXYNOS_DPI=y
CONFIG_DRM_EXYNOS_DSI=y
ARM: multi_v7_defconfig: Enable options for Exynos display support Many Exynos devices have devices attached to their display ports. This patch enables the needed Kconfig options to support different configuration such as simple panel, embedded DisplayPort (eDP) to LVDS bridges and HDMI displays. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:10:05 +09:00
CONFIG_DRM_EXYNOS_HDMI=y
ARM: multi_v7_defconfig: Enable Rockchip display support Enable options needed for HDMI out on rockchip: DRM driver, Rockchip DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM driver). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:17 +02:00
CONFIG_DRM_ROCKCHIP=m
multi_v7_defconfig: make Rockchip DRM drivers built-in These cause warnings in linux-next, as the symbols have become 'bool' there: arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-31 12:23:04 +02:00
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 16:19:37 +02:00
CONFIG_DRM_ATMEL_HLCDC=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_DRM_RCAR_DU=m
ARM: multi_v7_defconfig: enable HDMI output for Renesas RCar Actviate HDMI output of the RCar DU (and LVDS while we are here). Enable the HDMI encoder chip found on Lager/Koelsch boards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-12 08:12:22 +01:00
CONFIG_DRM_RCAR_LVDS=y
ARM: multi_v7: Enable sun4i DRM driver Enable the new DRM driver in the multi_v7 defconfig Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-11 22:32:41 +02:00
CONFIG_DRM_SUN4I=m
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all ARCH_QCOM enabled defconfigs to restore the previous expected build behavior. I split this off from the original patch to make this change unique to the multi_v7_defconfig Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-09-01 00:37:54 -05:00
CONFIG_DRM_MSM=m
ARM: multi_v7_defconfig: add NXP graphics drivers Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:42 +01:00
CONFIG_DRM_FSL_DCU=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_DRM_TEGRA=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_DRM_STM=m
CONFIG_DRM_STM_DSI=m
ARM: config: multi v7: Enable display drivers used by Tegra devices Enable display-related drivers used by various Tegra-based tablets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-12 00:14:12 +03:00
CONFIG_DRM_PANEL_LVDS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-09-14 13:21:52 -07:00
CONFIG_DRM_PANEL_EDP=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
ARM: config: multi v7: Enable display drivers used by Tegra devices Enable display-related drivers used by various Tegra-based tablets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-12 00:14:12 +03:00
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
ARM: multi_v7_config: enable S6E63J0X03 panel driver Add a module with Samsung S6E63J0X03 DSI panel driver to enable support for display panel on Exynos3250-based Samsung Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-16 12:35:37 +02:00
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-14 14:57:14 +02:00
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
ARM: config: multi v7: Enable display drivers used by Tegra devices Enable display-related drivers used by various Tegra-based tablets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-12 00:14:12 +03:00
CONFIG_DRM_LVDS_CODEC=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_DRM_DISPLAY_CONNECTOR=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
ARM: defconfig: Enable PL11x DRM driver on multi_v7 This switches the ARMv7 defconfig away from the old fbdev driver to the new DRM driver. All machines are now supported by the new driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-23 10:45:15 +01:00
CONFIG_DRM_SII902X=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 10:10:04 +01:00
CONFIG_DRM_SII9234=m
drm/bridge: dumb-vga-dac: Rename driver to simple-bridge The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:31 +02:00
CONFIG_DRM_SIMPLE_BRIDGE=m
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel for Samsung Exynos5250-based Arndale board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 11:09:52 +01:00
CONFIG_DRM_TOSHIBA_TC358764=m
ARM: config: multi v7: Enable display drivers used by Tegra devices Enable display-related drivers used by various Tegra-based tablets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-12 00:14:12 +03:00
CONFIG_DRM_TOSHIBA_TC358768=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-06-21 17:18:39 +02:00
CONFIG_DRM_STI=m
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_DRM_IMX=m
CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
CONFIG_DRM_IMX_TVE=m
CONFIG_DRM_IMX_LDB=m
CONFIG_DRM_IMX_HDMI=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DRM_VC4=m
ARM: multi_v7_defconfig: add NXP graphics drivers Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:42 +01:00
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_MXSFB=m
ARM: defconfig: Enable PL11x DRM driver on multi_v7 This switches the ARMv7 defconfig away from the old fbdev driver to the new DRM driver. All machines are now supported by the new driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-23 10:45:15 +01:00
CONFIG_DRM_PL111=m
ARM: multi_v7_defconfig: enable Lima driver A bunch of armv7 boards can now use the Lima driver, let's enable it in defconfig, it will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-06 10:56:45 +02:00
CONFIG_DRM_LIMA=m
ARM: multi_v7_defconfig: add Panfrost driver With the goal of making it easier for CI services such as KernelCI to run tests for it. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-04 13:20:01 +02:00
CONFIG_DRM_PANFROST=m
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_DRM_ASPEED_GFX=m
ARM: config: mutli v7: Reenable FB dependency DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM was enabled. In commit f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") the select was replaced with a depends on FB, disabling the drivers that depended on it. Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and VIDEO_VIVID. It must be set to y and not a module as the test driver VIDEO_VIVID requires it to be built in. Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-15 10:44:34 +09:30
CONFIG_FB=y
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 15:28:20 +01:00
CONFIG_FB_EFI=y
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 21:11:40 +13:00
CONFIG_FB_WM8505=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_FB_SH_MOBILE_LCDC=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_FB_SIMPLE=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_BACKLIGHT_PWM=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_BACKLIGHT_AS3711=y
ARM: multi_v7_defconfig: enable backlight gpio Enable generic GPIO based backlight driver. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-20 17:43:00 +02:00
CONFIG_BACKLIGHT_GPIO=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:38 +02:00
CONFIG_SOUND=m
CONFIG_SND=m
ARM: tegra: Update multi_v7_defconfig Add Tegra-specific configuration options to multi_v7_defconfig: * HDA controller and codec support * Watchdog support * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 16:17:52 +02:00
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_HDMI=m
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 For Odroid XU3-family enable the: - PWM fan (to control the CPU fan using thermal subsystem), - TI INA231 sensors (provide power measurements of big.LITTLE cores, DRAM and GPU), - Samsung sound (for Odroid XU3 and Snow as well). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23 19:37:17 +09:00
CONFIG_SND_USB_AUDIO=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:38 +02:00
CONFIG_SND_SOC=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_ATMEL_SOC_WM8904=m
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver as a module. It's used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 18:02:22 +02:00
CONFIG_SND_ATMEL_SOC_PDMIC=m
ARM: multi_v7_defconfig: add Atmel I2S driver Add atmel-i2s driver CONFIG_SND_ATMEL_SOC_I2S. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 19:47:55 +03:00
CONFIG_SND_ATMEL_SOC_I2S=m
ARM: multi_v7_defconfig: Add more BCM2835 support The WDT is required for reboot and I2S is used for audio devices on the P5 header (or BT audio on the Pi3). Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-28 18:52:27 -07:00
CONFIG_SND_BCM2835_SOC_I2S=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_SND_SOC_FSL_SAI=m
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_SND_PXA_SOC_SSP=m
ARM: config: multi v7: Add renamed symbols These options were renamed in recent times. Add the new name so the driver is built again, and drop the old name. POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d62054 ("PM: AVS: smartreflex Move driver to soc specific drivers"). Add the new symbol. QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver"). SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba78f ("ASoC: mmp-sspa: Add Device Tree support"). Enable that instead. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
2021-06-15 10:44:32 +09:30
CONFIG_SND_MMP_SOC_SSPA=m
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_SND_PXA910_SOC=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_SND_SOC_QCOM=m
CONFIG_SND_SOC_APQ8016_SBC=m
ARM: multi_v7_defconfig: Add rockchip audio support As the rockchip SPDIF driver landed for 4.4 and the required clock patches to make it work properly are scheduled for the 4.5 merge window it seems time to support for audio device found on rockchip boards in the defconfig as well. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-08 13:16:46 +01:00
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:13 +02:00
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
CONFIG_SND_SOC_SMDK_WM8994_PCM=m
CONFIG_SND_SOC_SNOW=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 10:10:04 +01:00
CONFIG_SND_SOC_ODROID=m
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_SND_SOC_ARNDALE=m
ARM: multi_v7_defconfig: enable sound driver for Midas platform Sound driver for Midas platform (Exnyos4412 SoC based) has been recently merged, so enable it for tests like other sound drivers for Exynos based boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201009134907.4578-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-10-09 15:49:07 +02:00
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SND_SOC_STI=m
ARM: multi_v7_defconfig: Enable audio support for stm32mp157 This commits enable (as module): - STM32 SAI and I2S configs used on stm32mp157. - Cirrus CS42L51 audio codec for stm32mp157a-dk1 board. - Audio graph card support for stm32mp157a-dk1 board. Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.com Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-25 14:56:32 +02:00
CONFIG_SND_SOC_STM32_SAI=m
CONFIG_SND_SOC_STM32_I2S=m
ARM: multi_v7_defconfig: enable STM32 spdifrx support Add STM32 SPDIFRX support by enabling CONFIG_SND_SOC_STM32_SPDIFRX as module. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2020-11-20 10:15:05 +01:00
CONFIG_SND_SOC_STM32_SPDIFRX=m
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support Add STM32 DFSDM audio support by enabling CONFIG_SND_SOC_STM32_DFSDM as module. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2020-11-20 10:15:06 +01:00
CONFIG_SND_SOC_STM32_DFSDM=m
ARM: multi_v7_defconfig: Enable A10 audio codec driver as module The A10 audio codec driver supports the on-chip audio codec found on Allwinner A10, A10s, A13, A20 SoCs. Build it as a module, since it is not critical. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:48 +08:00
CONFIG_SND_SUN4I_CODEC=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:38 +02:00
CONFIG_SND_SOC_TEGRA=m
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to multi_v7_defconfig, as modules. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-30 13:22:20 +02:00
CONFIG_SND_SOC_TEGRA20_I2S=m
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver Enable Tegra20 S/PDIF driver that is a part of HDMI audio subsystem. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-04 17:37:20 +03:00
CONFIG_SND_SOC_TEGRA20_SPDIF=m
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to multi_v7_defconfig, as modules. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-30 13:22:20 +02:00
CONFIG_SND_SOC_TEGRA30_I2S=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:38 +02:00
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
ARM: tegra: Update multi_v7_defconfig Enable some options that have recently been enabled on Tegra platforms: * TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri * SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-20 14:42:30 +02:00
CONFIG_SND_SOC_TEGRA_WM9712=m
ARM: multi_v7_defconfig: Make sound support modular Make sound support modular to reduce kernel size (-571 KiB): text data bss dec hex filename 12990441 1438820 342552 14771813 e16665 vmlinux.before 12451039 1396476 339800 14187315 d87b33 vmlinux.after Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29 11:21:38 +02:00
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig The BeagleBone Black supports audio over HDMI, using a combination of the DaVinci McASP (used for audio by a very large proportion of DaVinci systems with audio support) and a TDA998x device driving the HDMI link (this is a very widely used driver). Build both drivers as modules in multi_v7_defconfig so they can be more easily included in testing. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06 23:26:46 +01:00
CONFIG_SND_SOC_DAVINCI_MCASP=m
ARM: configs: Enable ASoC AC'97 glue AC'97 was quite commonly used on at least i.MX designs so enable the glue code that allows use of AC'97 with ASoC based designs to improve testing coverage. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13 13:06:32 +01:00
CONFIG_SND_SOC_AC97=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_SND_SOC_AK4642=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SND_SOC_CPCAP=m
ARM: multi_v7_defconfig: Enable audio support for stm32mp157 This commits enable (as module): - STM32 SAI and I2S configs used on stm32mp157. - Cirrus CS42L51 audio codec for stm32mp157a-dk1 board. - Audio graph card support for stm32mp157a-dk1 board. Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.com Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-25 14:56:32 +02:00
CONFIG_SND_SOC_CS42L51_I2C=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_SND_SOC_SGTL5000=m
ARM: multi_v7_defconfig: Enable STi and simple-card drivers. This patch enables the STi ALSA drivers found on STi platforms as well as the simple-card driver which is a dependency to have working sound. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Cc: arnaud.pouliquen@st.com Cc: broonie@kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 10:39:16 +01:00
CONFIG_SND_SOC_STI_SAS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SND_SOC_WM8978=m
ARM: multi_v7_defconfig: Enable audio support for stm32mp157 This commits enable (as module): - STM32 SAI and I2S configs used on stm32mp157. - Cirrus CS42L51 audio codec for stm32mp157a-dk1 board. - Audio graph card support for stm32mp157a-dk1 board. Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.com Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-25 14:56:32 +02:00
CONFIG_SND_AUDIO_GRAPH_CARD=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_USB=y
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules We can support USB OTG with MUSB driver on many ARM SoCs. Let's enable all the SoCs with MUSB as loadable modules. And let's enable their related DMA hardware. And as MUSB is an USB OTG controller, let's enable OTG support too. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 14:59:57 -08:00
CONFIG_USB_OTG=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_USB_XHCI_HCD=y
ARM: configs: enable XHCI mvebu support in multi_v7_defconfig The Marvell Armada 38x platform needs the xhci_mvebu driver enabled for the xHCI USB hosts, so this commit enables the corresponding Kconfig option in multi_v7_defconfig. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: arm@kernel.org Cc: Kevin Hilman <khilman@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-07 15:52:21 +02:00
CONFIG_USB_XHCI_MVEBU=y
ARM: multi_v7: Enable Tegra XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26 19:01:45 +02:00
CONFIG_USB_XHCI_TEGRA=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_USB_EHCI_HCD=y
ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers. Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 17:47:00 +01:00
CONFIG_USB_EHCI_HCD_STI=y
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module Exynos EHCI driver is compiled as kernel built-in, but it requires Samsung USB2 Generic PHY driver to operate properly, which is compiled as module. Make the Exynos EHCI driver also a module, because having it built-in makes no sense. Exynos OHCI, which also uses that PHY driver, is already compiled as a module. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201124083312.12356-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-24 09:33:12 +01:00
CONFIG_USB_EHCI_EXYNOS=m
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_USB_EHCI_MV=m
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_USB_OHCI_HCD=y
ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers. Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17 17:47:00 +01:00
CONFIG_USB_OHCI_HCD_STI=y
ARM: multi_v7_defconfig: Enable OHCI on exynos SoCs Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family, Exynos5250, Exynos5440 and Exynos542x/5800 family. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:09:41 +09:00
CONFIG_USB_OHCI_EXYNOS=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_USB_STORAGE=y
ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports UAS protocol. Enable support for it to make sure that all built-in storage devices are available. Enable it as module to keep in line with multi_v7 policy to enable drivers as build-in only if they are critical for boot process. On Odroid HC1 the kernel itself has to be still read from the SD-card, so assume that modules/initrd is also accessible there. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-03 12:13:32 +02:00
CONFIG_USB_UAS=m
ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed dual role controller for USB OTG. Now that the issue with MUSB and USB gadget registration order has been resolved, we can enable this driver in dual role mode. This patch only enables the driver core and Allwinner platform support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:49 +08:00
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules We can support USB OTG with MUSB driver on many ARM SoCs. Let's enable all the SoCs with MUSB as loadable modules. And let's enable their related DMA hardware. And as MUSB is an USB OTG controller, let's enable OTG support too. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 14:59:57 -08:00
CONFIG_USB_MUSB_TUSB6010=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_MUSB_UX500=m
CONFIG_USB_UX500_DMA=y
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_TUSB_OMAP_DMA=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 10:51:29 -08:00
CONFIG_USB_DWC3=y
ARM: multi_v7_defconfig: Build in DWC2 USB support This allows the Raspberry Pi 2 to be network booted from the defconfig. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-31 13:38:57 -07:00
CONFIG_USB_DWC2=y
ARM: multi_v7_defconfig: Select USB chipidea driver CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 14:02:06 -03:00
CONFIG_USB_CHIPIDEA=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_USB_CHIPIDEA_UDC=y
ARM: multi_v7_defconfig: Select USB chipidea driver CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 14:02:06 -03:00
CONFIG_USB_CHIPIDEA_HOST=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_AB8500_USB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_KEYSTONE_USB_PHY=m
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has been a "regression source" a lot of times. The last case is breakage of USB mass storage boot has been commit e590474768f1 ("driver core: Set fw_devlink=on by default") for multi_v7_defconfig. As long as NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing endlessly and prevent booting from USB mass storage device. So make the driver built-in as in bcm2835_defconfig and arm64/defconfig. Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default") Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-10 13:04:55 +02:00
CONFIG_NOP_USB_XCEIV=y
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants With MUSB USB OTG controller enabled, let's now enable the USB PHYs found on omap varian SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 08:39:09 -08:00
CONFIG_AM335X_PHY_USB=m
CONFIG_TWL6030_USB=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_USB_GADGET=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_USB_FSL_USB2=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_USB_RENESAS_USBHS_UDC=m
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_USB_ASPEED_VHUB=m
ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module With USB OTG now enabled, it makes sense to allow configuring the USB gadgets via configfs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01 15:06:19 -08:00
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-19 10:19:37 +02:00
CONFIG_USB_ETH=m
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support Enable support for the STMicroelectronics STUSB160X USB Type-C port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as modules. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-06 17:58:05 +01:00
CONFIG_TYPEC=m
CONFIG_TYPEC_STUSB160X=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_MMC=y
ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-03 10:21:49 -08:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
ARM: multi_v7_defconfig: re-enable SDHCI drivers Following 5d01b7684b7e "mmc: simplify SDHCI Kconfig dependencies", SDHCI drivers that use MMC_SDHCI_PLTFM no longer select it, but instead depend on it. This means that multi_v7_defconfig no longer selects it, and hence many SDHCI drivers are no longer enabled. Explicitly enable MMC_SDHCI_PLTFM to solve this. Fixes: 5d01b7684b7e ("mmc: simplify SDHCI Kconfig dependencies") Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-16 10:50:42 -06:00
CONFIG_MMC_SDHCI_PLTFM=y
ARM: multi_v7_defconfig: Enable Zynq peripheral drivers A few drivers for Zynq peripherals made it into mainline recently. Enable them in the defconfig. The following devices are enabled: - Cadence Macb Ethernet controller - Cadence I2C controller - Arasan SDHCI Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 10:04:28 -07:00
CONFIG_MMC_SDHCI_OF_ARASAN=y
ARM: multi_v7_defconfig: Add Atmel SDHCI device The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 15:04:51 +02:00
CONFIG_MMC_SDHCI_OF_AT91=y
ARM: multi_v7_defconfig: make eSDHC driver built-in Sometimes root file system is deployed on SD card. It's proper to build eSDHC driver into kernel. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-01 10:32:02 +08:00
CONFIG_MMC_SDHCI_OF_ESDHC=y
ARM: multi_v7_defconfig: add SDHCI for i.MX Turn on SDHCI for i.MX support so machines can boot with local rootfs on SD. Tested on a Wandboard Quad. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-29 17:34:45 -07:00
CONFIG_MMC_SDHCI_ESDHC_IMX=y
ARM: add Marvell Dove and some drivers to multi_v7 defconfig With Marvell Dove now being part of the multi_v7 family, add some Dove specific drivers to multi_v7 defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-27 22:28:05 +01:00
CONFIG_MMC_SDHCI_DOVE=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_MMC_SDHCI_TEGRA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MMC_SDHCI_S3C=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_MMC_SDHCI_PXAV3=y
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_MMC_SDHCI_PXAV2=m
ARM: spear: enable spear13xx in multi_v7_defconfig SPEAr13xx can now be part of the regular multiplatform defconfig, so let's enable it there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 17:32:16 +01:00
CONFIG_MMC_SDHCI_SPEAR=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-28 00:14:10 +09:00
CONFIG_MMC_SDHCI_S3C_DMA=y
ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-03 10:21:49 -08:00
CONFIG_MMC_SDHCI_BCM_KONA=y
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC Enable CONFIG_MMC_MESON_MX_SDHC so that SDHC host controller on Amlogic SoCs boards enable support for eMMC and MMC drivers. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210715092233.1084-1-linux.amoon@gmail.com
2021-07-15 09:22:25 +00:00
CONFIG_MMC_MESON_MX_SDHC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MMC_MESON_MX_SDIO=y
ARM: update multi_v7_defconfig for STI This patch enables SDHCI STI platform driver. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-07-09 17:07:00 +02:00
CONFIG_MMC_SDHCI_ST=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_MMC_ATMELMCI=y
ARM: defconfig: multi_v7: Enable Qualcomm options for Honami The Honami device does not boot due to the lack of pinctrl support compiled in with the multi_v7_defconfig. This patch correct this and enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found on a variety of Qualcomm boards. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-01 14:47:50 -08:00
CONFIG_MMC_SDHCI_MSM=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_MMC_MVSDIO=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_MMC_SDHI=y
ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER Enable the UniPhier SD controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-03 09:18:22 +09:00
CONFIG_MMC_UNIPHIER=y
ARM: multi_v7_defconfig: Enable Exynos platform Enable Exynos platform and its related IPs for multi_v7_defconfig. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-28 00:14:10 +09:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP Allows booting from SD/MMC on RK3288 and other platforms. Added here so I can enable the board in the boot farm. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-20 00:18:50 -07:00
CONFIG_MMC_DW_ROCKCHIP=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-08 10:19:07 +01:00
CONFIG_MMC_BCM2835=y
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's can use sdhci-omap for eMMC/SD/SDIO controller.. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 18:27:52 +05:30
CONFIG_MMC_SDHCI_OMAP=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_MMC_OWL=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:08 +09:00
CONFIG_LEDS_CLASS_FLASH=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_LEDS_CPCAP=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_LEDS_GPIO=y
ARM: multi_v7: enable igb, stmpe, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later three can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-10 00:49:50 +02:00
CONFIG_LEDS_PWM=y
ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:08 +09:00
CONFIG_LEDS_MAX77693=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_LEDS_MAX8997=m
ARM: multi_v7_defconfig: Enable Acer A500 drivers Enable EC controller drivers of the Acer A500 tablet. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-14 05:51:26 +03:00
CONFIG_LEDS_ACER_A500=m
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
ARM: multi_v7_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:08:45 +01:00
CONFIG_RTC_DRV_AC100=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_RTC_DRV_AS3722=y
ARM: add drivers for Colibri T30 to multi_v7_defconfig Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-14 23:31:50 +02:00
CONFIG_RTC_DRV_DS1307=y
ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards Similar to the power management situation on Rockchip boards, there are two common RTC setups. For boards using the RK808 chip as a PMIC that chip also serves as the RTC, while boards using the ACT8846 typically use the Haoyu Microelectronics HYM8563 chip as their RTC. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:19 +02:00
CONFIG_RTC_DRV_HYM8563=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_RTC_DRV_MAX8907=y
ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:14 +02:00
CONFIG_RTC_DRV_MAX8998=m
ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Function Device present on Trats and Origen boards by toggling on drivers: main MFD, charger, haptic motor, regulator, LED and RTC. This allows to test and usage of these boards with multi_v7 config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:07 +09:00
CONFIG_RTC_DRV_MAX8997=m
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 13:24:24 -08:00
CONFIG_RTC_DRV_MAX77686=y
ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards Similar to the power management situation on Rockchip boards, there are two common RTC setups. For boards using the RK808 chip as a PMIC that chip also serves as the RTC, while boards using the ACT8846 typically use the Haoyu Microelectronics HYM8563 chip as their RTC. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:19 +02:00
CONFIG_RTC_DRV_RK808=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_RTC_DRV_RS5C372=m
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase hardware support enable the driver in the multi_v7_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-10 14:05:12 +00:00
CONFIG_RTC_DRV_PCF85363=m
ARM: multi_v7_defconfig: Enable BQ32000 RTC driver The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the multi_v7_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-18 12:12:38 +01:00
CONFIG_RTC_DRV_BQ32K=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_RTC_DRV_TWL4030=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_RTC_DRV_PALMAS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_RTC_DRV_S35390A=m
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 13:14:21 +01:00
CONFIG_RTC_DRV_RX8581=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_RTC_DRV_EM3027=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_RTC_DRV_S5M=m
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_RTC_DRV_DA9063=m
ARM: multi_v7_defconfig: enable CONFIG_EFI This enables CONFIG_EFI for multi_v7_defconfig, which adds support for booting via EFI, and for the EFI framebuffer as builtin options. It also enables the EFI rtc, the EFI variable pseudo-filesystem and the EFI capsule loader as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 15:28:20 +01:00
CONFIG_RTC_DRV_EFI=m
ARM: multi_v7_defconfig: enable Conexant Digicolor platform This enables the digicolor drivers that are already merged as part of the multi_v7_defconfig file. [arnd: change rtc and i2c to loadable modules] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-04-28 13:59:44 +03:00
CONFIG_RTC_DRV_DIGICOLOR=m
ARM: multi_v7_defconfig: Enable Samsung S3C SoC RTC The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found on many Samsung SoCs. Build the driver as a module to support these RTC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:07:57 +09:00
CONFIG_RTC_DRV_S3C=m
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_RTC_DRV_SA1100=m
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards, - Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards, - Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach audiocamera shield expansion board, - Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the Koelsch and Lager boards, - Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1 boards. All of the above are modular (CEC support is an optional feature of the modular ADV7604 driver). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
2020-06-30 19:12:37 +02:00
CONFIG_RTC_DRV_SH=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_RTC_DRV_PL031=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
arm: vt8500: Add wm8850 config options to multi_v7_defconfig This patch finally adds the WM8850 SoC to the multi_v7_defconfig. We don't have a seperate defconfig for this SoC as it is only available as a multiplatform option. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-25 21:11:40 +13:00
CONFIG_RTC_DRV_VT8500=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_RTC_DRV_SUNXI=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_RTC_DRV_MV=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_RTC_DRV_PM8XXX=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_RTC_DRV_TEGRA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_RTC_DRV_ST_LPC=y
ARM: multi_v7_defconfig: enable STM32 RTC Enable the STM32 Real Time Clock (RTC) driver, implemented on STM32MP1 SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-05-17 14:07:00 +02:00
CONFIG_RTC_DRV_STM32=y
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_RTC_DRV_CPCAP=m
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_RTC_DRV_ASPEED=m
ARM: add v7 multi-platform defconfig Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-27 14:39:25 -05:00
CONFIG_DMADEVICES=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=y
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_FSL_EDMA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_IMX_DMA=y
CONFIG_IMX_SDMA=y
ARM: multi_v7_defconfig: add mvebu drivers Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:20:07 -08:00
CONFIG_MV_XOR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_MXS_DMA=y
ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21 11:44:47 +05:30
CONFIG_OWL_DMA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PL330_DMA=y
CONFIG_STE_DMA40=y
CONFIG_ST_FDMA=m
ARM: multi_v7_defconfig: enable STM32 DMAv2, DMAMUX and MDMA This enables drivers for STM32: - DMAv2 - DMMAUX - MDMA Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-05-28 11:08:00 +02:00
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver All Tegra20/30/114 serial and audio drivers depend on the Tegra20 APB DMA driver, enable this DMA driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-04 17:37:21 +03:00
CONFIG_TEGRA20_APB_DMA=y
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC Enable the UniPhier MIO DMAC driver. This is used as the DMA engine for accelerating the SD/eMMC controller drivers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-21 17:51:24 +09:00
CONFIG_UNIPHIER_MDMAC=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_XILINX_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_DW_DMAC=y
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_RCAR_DMAC=y
ARM: multi_v7_defconfig: Enable missing Renesas ARM support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:26 +01:00
CONFIG_RENESAS_USB_DMAC=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_MMIO=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_STAGING=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
ARM: multi_v7_defconfig: add missing Tegra options Add all HW-support options from tegra_defconfig that are missing from multi_v7_defconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25 11:38:24 -06:00
CONFIG_NVEC_PAZ00=y
ARM: multi_v7_defconfig: Enable frame buffer console for armadillo800eva Enabling the frame buffer device on r8a7740/armadillo800eva requires the board staging code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-11 11:45:27 +01:00
CONFIG_STAGING_BOARD=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=m
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04 13:24:24 -08:00
CONFIG_COMMON_CLK_MAX77686=y
ARM: multi_v7_defconfig: enable rk808 clkout module The rk808 supplies two clock outputs with one going back into the soc as 32kHz supply, supplying some core soc clocks with it. The system can boot without it being present, but it is needed for example as source clock for the thermal driver. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 22:22:28 +01:00
CONFIG_COMMON_CLK_RK808=m
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers Enable the ARM SCMI protocol and the common clock, cpufreq and sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide support for CPU frequency scaling, clock configuration and temperature and current sensors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-08 20:42:27 -08:00
CONFIG_COMMON_CLK_SCMI=y
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, fuel gauge (max17042), used on: Trats2, - s5m/s2mps: RTC, clock, used on: Arndale, Arndale Octa, Gear 1, Gear 2 This allows full usage of charging stack on these devices along with RTC and 32 kHz clocks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [kgene@kernel.org: savedefconfig] Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 15:06:10 +09:00
CONFIG_COMMON_CLK_S2MPS11=m
ARM: defconfig: enable cpufreq driver for RPi This enables on both multi_v7_defconfig and bcm2835_defconfig the new firmware based clock and cpufreq drivers for the Raspberry Pi platform. In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled, the conservative governor was selected as default since it better handles the high frequency transition latency. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-06-12 20:24:58 +02:00
CONFIG_CLK_RASPBERRYPI=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_COMMON_CLK_QCOM=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_QCOM_CLK_RPM=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_CLK_SMD_RPM=y
ARM: multi_v7_defconfig: fix support for APQ8084 This patch enables configs required to boot IFC6540 board with atleast a serial console. Without this patch there is no serial console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-21 19:55:20 +01:00
CONFIG_APQ_MMCC_8084=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 14:34:05 -06:00
CONFIG_MSM_GCC_8660=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_MSM_GCC_8916=y
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-25 14:34:05 -06:00
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
ARM: multi_v7_defconfig: add sama7g5 SoC Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig. Also add it's clock timer, the PIT64B. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
2021-06-28 15:04:52 +03:00
CONFIG_MICROCHIP_PIT64B=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_BCM2835_MBOX=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_APCS_IPC=y
CONFIG_QCOM_IPCC=y
ARM: multi_v7_defconfig: Enable Rockchip display support Enable options needed for HDMI out on rockchip: DRM driver, Rockchip DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM driver). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:17 +02:00
CONFIG_ROCKCHIP_IOMMU=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_EXYNOS_IOMMU=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_IOMMU=y
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Will Deacon <will@kernel.org> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-20 13:29:46 +05:30
CONFIG_REMOTEPROC=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_SYSMON=m
CONFIG_QCOM_WCNSS_PIL=m
ARM: multi_v7_defconfig: Enable st_remoteproc driver. The st231 remote coprocessors are found on all STi chipsets. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 10:39:14 +01:00
CONFIG_ST_REMOTEPROC=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_RPMSG_QCOM_SMD=y
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module The RPMSG_VIRTIO is now user selectable option so we explicitly select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was selected by ST_REMOTEPROC=m in multi_v7_defconfig. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-05 22:19:58 +05:30
CONFIG_RPMSG_VIRTIO=m
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_ASPEED_P2A_CTRL=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_RASPBERRYPI_POWER=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_CPR=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_QCOM_GSBI=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_RMTFS_MEM=m
CONFIG_QCOM_RPMPD=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_QCOM_SOCINFO=m
CONFIG_QCOM_STATS=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_QCOM_WCNSS_CTRL=m
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_ARCH_EMEV2=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7778=y
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7791=y
CONFIG_ARCH_R8A7792=y
CONFIG_ARCH_R8A7740=y
CONFIG_ARCH_R8A73A4=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_ARCH_R7S72100=y
CONFIG_ARCH_R7S9210=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_ARCH_R8A77470=y
CONFIG_ARCH_R8A7745=y
ARM: multi_v7_defconfig: Enable r8a7742 SoC Enable recently added r8a7742 (RZ/G1H) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1588197415-13747-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-29 22:56:40 +01:00
CONFIG_ARCH_R8A7742=y
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_ARCH_R8A7743=y
CONFIG_ARCH_R8A7744=y
CONFIG_ARCH_R9A06G032=y
CONFIG_ARCH_SH73A0=y
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_ROCKCHIP_IODOMAIN=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
ARM: multi_v7_defconfig: Enable Exynos bus and memory frequency scaling (devfreq) Enable devfreq events along with drivers for scaling frequency and voltages of Exynos buses and Dynamic Memory Controller (DMC). This usually brings energy saving benefits. So far devfreq was disabled because it was causing hangs during system reboot (voltage not matching reset frequency). This was already fixed. Occasionally, devfreq might negatively impact performance of certain SoC blocks, e.g. when a bus is scaled down but some block (like Mixer with two Full HD windows) wants to perform high-throughput DMA operations. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:02:34 +02:00
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
ARM: multi_v7_defconfig: Enable Tegra ACTMON support This brings the DevFreq framework in and builds the ACTMON driver that on Tegra124 will scale the external memory clock based on current load. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30 16:40:13 +02:00
CONFIG_ARM_TEGRA_DEVFREQ=m
ARM: multi_v7_defconfig: Enable Exynos bus and memory frequency scaling (devfreq) Enable devfreq events along with drivers for scaling frequency and voltages of Exynos buses and Dynamic Memory Controller (DMC). This usually brings energy saving benefits. So far devfreq was disabled because it was causing hangs during system reboot (voltage not matching reset frequency). This was already fixed. Occasionally, devfreq might negatively impact performance of certain SoC blocks, e.g. when a bus is scaled down but some block (like Mixer with two Full HD windows) wants to perform high-throughput DMA operations. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:02:34 +02:00
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX8997=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_EXTCON_USB_GPIO=y
ARM: config: multi_v7: Update it for Keystone defconfig Sync multi_v7_defconfig with the current keystone_defconfig with recent updates. CONFIG_PCI_KEYSTONE=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_I2C_DAVINCI=y CONFIG_SPI_DAVINCI=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_DAVINCI_WATCHDOG CONFIG_USB_DWC3=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_TI_AEMIF=y CONFIG_KEYSTONE_IRQ=y Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-29 10:51:29 -08:00
CONFIG_TI_AEMIF=y
ARM: multi_v7_defconfig: add FMC2 EBI controller support This patch adds FMC2 EBI controller support used by STM32MP SOCs. Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-24 12:13:42 +02:00
CONFIG_STM32_FMC2_EBI=y
ARM: multi_v7_defconfig: Enable Exynos bus and memory frequency scaling (devfreq) Enable devfreq events along with drivers for scaling frequency and voltages of Exynos buses and Dynamic Memory Controller (DMC). This usually brings energy saving benefits. So far devfreq was disabled because it was causing hangs during system reboot (voltage not matching reset frequency). This was already fixed. Occasionally, devfreq might negatively impact performance of certain SoC blocks, e.g. when a bus is scaled down but some block (like Mixer with two Full HD windows) wants to perform high-throughput DMA operations. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:02:34 +02:00
CONFIG_EXYNOS5422_DMC=m
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_IIO=y
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 13:05:28 +01:00
CONFIG_IIO_SW_TRIGGER=y
ARM: configs: multi_v7: Add ASPEED G6 This adds the ASPEED AST2600 system and associated ASPEED devices so we get build coverage. The changes to the UART configuration to ensure the default console (UART5) works. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21 15:25:29 +09:30
CONFIG_ASPEED_ADC=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_AT91_ADC=m
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver Add the new sama5d2-compatible ADC driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-26 18:04:36 +02:00
CONFIG_AT91_SAMA5D2_ADC=m
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 16:02:50 +02:00
CONFIG_BERLIN2_ADC=m
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
CONFIG_CPCAP_ADC=m
ARM: multi_v7_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable module support for its driver and also for the needed Exynos ADC driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-15 18:32:44 +02:00
CONFIG_EXYNOS_ADC=m
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers With the SAR ADC driver ADC measurements can be taken though the IIO framework. Additionally the SAR ADC has a channel which is connected to an internal temperature sensor. The calibration data for this internal temperature sensor is stored in the eFuse. Enable the SAR ADC driver and the eFuse driver for the 32-bit Amlogic Meson SoCs so we can expose the chip temperature to userspace through the IIO hwmon driver (whose config option is already enabled: CONFIG_SENSORS_IIO_HWMON=y). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-28 21:51:22 +01:00
CONFIG_MESON_SARADC=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_SPMI_VADC=m
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_ROCKCHIP_SARADC=m
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:22:01 +01:00
CONFIG_STM32_ADC_CORE=m
CONFIG_STM32_ADC=m
CONFIG_STM32_DFSDM_ADC=m
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_STMPE_ADC=m
ARM: multi_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-10 18:10:52 -08:00
CONFIG_VF610_ADC=m
ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers This is a squashed series from Soren: "I went through the defconfig and searched for Zynq drivers. The result is this series of patches. The first few are all for Zynq and pretty much straight forward. The second half is mostly soft-IP, I think. That soft-IP works with Zynq devices, but I'm not sure whether those should go into the multi_v7 defconfig." Soren Brinkmann (11): ARM: multi_v7_defconfig: Enable Zynq cpuidle driver ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver ARM: multi_v7_defconfig: Enable XADC driver ARM: multi_v7_defconfig: Enable Zynq SPI driver ARM: multi_v7_defconfig: Enable Zynq GPIO driver ARM: multi_v7_defconfig: Enable Xilinx I2C driver ARM: multi_v7_defconfig: Enable Xilinx SPI driver ARM: multi_v7_defconfig: Enable Xilinx GPIO driver ARM: multi_v7_defconfig: Enable Xilinx VDMA driver ARM: multi_v7_defconfig: Enable Xilinx emaclite driver ARM: multi_v7_defconfig: Enable Xilinx watchdog timer Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> [olof: Added commit message from series envelope email, squashed to one patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22 08:54:26 -07:00
CONFIG_XILINX_XADC=y
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enable following drivers for merged devices: - Batteries with BQ27XXX chips for Minnie boards. - Elan eKTH I2C touchscreen for Minnie boards. - GPIO charger for all Veyron boards. - Rockchip SARADC driver for all rk3288 boards. - Rockchip eFUSE driver for all rk3288 boards. - TPM security chip for all Veyron boards. - ChromeOS EC userspace interface for all chromebooks boards. - ChromeOS EC light and proximity sensors for some chromebooks. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-07 16:20:31 +01:00
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_STM32_DAC=m
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 13:05:28 +01:00
CONFIG_MPU3050_I2C=y
ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:13 +02:00
CONFIG_CM36651=m
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enable following drivers for merged devices: - Batteries with BQ27XXX chips for Minnie boards. - Elan eKTH I2C touchscreen for Minnie boards. - GPIO charger for all Veyron boards. - Rockchip SARADC driver for all rk3288 boards. - Rockchip eFUSE driver for all rk3288 boards. - TPM security chip for all Veyron boards. - ChromeOS EC userspace interface for all chromebooks boards. - ChromeOS EC light and proximity sensors for some chromebooks. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-07 16:20:31 +01:00
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_AK8975=y
ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 13:05:28 +01:00
CONFIG_IIO_HRTIMER_TRIGGER=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:22:01 +01:00
CONFIG_IIO_STM32_LPTIMER_TRIGGER=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_PWM=y
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_PWM_ATMEL=m
ARM: multi_v7_defconfig: add HLCDC drivers as modules Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-30 16:19:37 +02:00
CONFIG_PWM_ATMEL_HLCDC_PWM=m
ARM: multi_v7_defconfig: Add Atmel SAMA5 family Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig. Note that the console will be ttyAT0 instead of the usual ttyS0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-03 11:01:18 +02:00
CONFIG_PWM_ATMEL_TCB=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BRCMSTB=m
ARM: multi_v7_defconfig: Enable some drivers for LS1021A This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-09 16:41:39 +08:00
CONFIG_PWM_FSL_FTM=m
ARM: multi_v7_defconfig: enable the Meson PWM controller This enables the Amlogic Meson PWM controller. It is used for a dimmable LED on some devices. Additionally some devices use it to generate the 32.768 kHz (low power oscillator) clock. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-22 12:38:05 +02:00
CONFIG_PWM_MESON=m
ARM: multi_v7_defconfig: Select PWM_RCAR as module Enable PWM support for R-Car and friends by default. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-19 13:57:17 +00:00
CONFIG_PWM_RCAR=m
ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-24 15:14:45 +01:00
CONFIG_PWM_RENESAS_TPU=y
ARM: multi_v7_defconfig: Enable common Rockchip devices/busses Enable Rockchip I2C, SPI, PWM, thermal drivers. Builtin are I2C (as it often required to control the pmic) and Thermal drivers (to prevent thermal damage). SPI and PWM drivers configured as modules Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-24 13:39:15 +02:00
CONFIG_PWM_ROCKCHIP=m
ARM: multi_v7_defconfig: Enable Samsung PWM support Build the Generic PWM Samsung driver as a module to support PWM devices used in platforms with a Samsung SoC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-19 13:05:57 +09:00
CONFIG_PWM_SAMSUNG=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PWM_STI=y
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers This enables drivers for STM32 timer, low power timer and analog hardware that can be used on STM32MP1 SoC: - Timer & LP Timer MFD core, PWM, trigger & encoder drivers - IIO ADC/DAC/DFSDM - vrefbuf regu driver (voltage reference buffer). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:22:01 +01:00
CONFIG_PWM_STM32=m
CONFIG_PWM_STM32_LP=m
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:42 +08:00
CONFIG_PWM_SUN4I=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_PWM_TEGRA=y
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_PWM_VT8500=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_KEYSTONE_IRQ=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
ARM: multi_v7_defconfig: add driver support for hix5hd2 Tested on hix5hd2 platform with mmc, usb, network, reboot etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-25 15:37:26 +08:00
CONFIG_PHY_HIX5HD2_SATA=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PHY_BERLIN_SATA=y
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin Some drivers used on a Marvell Berlin kernel were missing from multi_v7_defconfig. This series add them: * The pxa168 Ethernet driver is added as a loadable module. * The Berlin ADC driver is added as a loadable module. * Both the Berlin USB PHY and SATA PHY drivers are added, built-in, as they are required for the already available USB and SATA functionalities in multi_v7_defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-14 16:02:50 +02:00
CONFIG_PHY_BERLIN_USB=y
ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-29 19:57:14 -07:00
CONFIG_PHY_BRCM_USB=m
ARM: multi_v7_defconfig: enable MMP platforms Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig for no good reasons. Enable the DT-based boards along with modules for their peripherals. Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17 16:57:05 +02:00
CONFIG_PHY_MMP3_USB=m
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants With MUSB USB OTG controller enabled, let's now enable the USB PHYs found on omap varian SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 08:39:09 -08:00
CONFIG_PHY_CPCAP_USB=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PHY_QCOM_APQ8064_SATA=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_PHY_QCOM_USB_HS=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PHY_RCAR_GEN2=m
ARM: multi_v7_defconfig: Enable Rockchip displayport phy The displayport phy controls the output of the Analogix displayport controller on Rockchip SoCs and is therefore one component to enable veyron devices to use their internal display. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12 03:18:39 +02:00
CONFIG_PHY_ROCKCHIP_DP=m
multi_v7_defconfig: make Rockchip usb2-phy built-in The phy is necessary for the dwc2 controllers driving the usb ports on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream drivers (mass-storage as well as usb networking) are already built-in, so only the phy is missing to allow booting from usb-devices without to much hassle. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-03 12:22:12 +02:00
CONFIG_PHY_ROCKCHIP_USB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PHY_SAMSUNG_USB2=m
ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC Sync with exynos_defconfig and enable following options for Samsung Exynos SoC based boards: 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller, used for example on Exynos5433 (if booted in 32-bit mode), 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs, 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on Exynos5260 RexNos REX-RED board, 4. SND_SOC_ARNDALE: sound support on Arndale boards, 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,, 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers for handling micro USB on mobile Samsung boards (Trats, Trats2, Rinato), 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and SMDK5250 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-08 18:03:56 +02:00
CONFIG_PHY_EXYNOS5250_SATA=m
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-14 10:54:00 +01:00
CONFIG_PHY_MIPHY28LP=y
ARM: multi_v7_defconfig: Enable stih407 usb picophy This patch enables the picoPHY usb phy which is used by the usb2 and usb3 host controllers when controlling usb2/1.1 devices. It is found in stih407 family SoC's from STMicroelectronics. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-07 16:04:00 +01:00
CONFIG_PHY_STIH407_USB=y
ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support This patch adds STM32F7 I2C support to multi_v7_defconfig and enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on STM32MP1 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-04 14:46:55 +02:00
CONFIG_PHY_STM32_USBPHYC=y
ARM: multi_v7: Enable Tegra XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26 19:01:45 +02:00
CONFIG_PHY_TEGRA_XUSB=y
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
ARM: config: multi v7: Enable dependancies Some drivers have not been built as they gained dependencies in kconfig but those dependencies were not added to the defconfig. The MSM pinctrl drivers fell out of the defconfig as of commit be117ca32261 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a selected config"). Add PINCTRL_MSM so these stay enabled. EDAC depends on RAS, so enable it to ensure the EDAC drivers stay enabled. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-15 10:44:33 +09:30
CONFIG_RAS=y
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:36 +01:00
CONFIG_NVMEM_IMX_OCOTP=y
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_QCOM_QFPROM=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_ROCKCHIP_EFUSE=m
ARM: sunxi: Re-enable SID driver in multi_v7_defconfig Commit 3d0b16a66c8a ("nvmem: sunxi: Move the SID driver to the nvmem framework") moved the the sunxi SID driver to a new framework, but left multi_v7_defconfig with the deprecated config symbol EEPROM_SUNXI_SID instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver in multi_v7_defconfig. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-19 22:33:43 +01:00
CONFIG_NVMEM_SUNXI_SID=y
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-18 21:34:36 +01:00
CONFIG_NVMEM_VF610_OCOTP=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_MESON_MX_EFUSE=m
ARM: multi_v7_defconfig: Enable nvmem's rmem driver It'll be used by the RPi4 family of boards to access its bootloader configuration. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210112142342.7290-1-nsaenzjulienne@suse.de
2021-01-12 15:23:42 +01:00
CONFIG_NVMEM_RMEM=m
ARM: configs: multi_v7: ASPEED network, gpio, FSI Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 10:46:03 +10:30
CONFIG_FSI=m
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_MSM8916=y
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers This enables the counter subsystem and drivers for the stm32 timer and LP timer. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-10-16 10:00:29 +02:00
CONFIG_COUNTER=m
CONFIG_STM32_TIMER_CNT=m
CONFIG_STM32_LPTIMER_CNT=m
ARM: Make multi_v7_defconfig usable on hardware This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes. Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 18:36:05 -07:00
CONFIG_EXT4_FS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_VFAT_FS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_NTFS_FS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
ARM: multi_v7: copy most options from tegra_defconfig multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20 13:41:32 -07:00
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
ARM: multi_v7_defconfig: enable pstore configs It's useful to get testing on these features on various boards (e.g., on KernelCI), and (when they're working) the ramoops feature is extremely helpful for debugging live systems. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-09 12:52:50 -08:00
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 10:12:58 +02:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2 NFS is widely used in debugging and Continuous Integration systems, so enable the newest versions of protocol: v4.1 and v4.2. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-16 12:44:07 +01:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
arm: multi_v7_defconfig: add i.MX options and NFS root - Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-03 10:12:58 +02:00
CONFIG_ROOT_NFS=y
ARM: multi_v7_defconfig: Enable Broadcom Cygnus Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-12 13:03:17 -08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 19:26:54 +03:00
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_CRYPTO_DEV_SUN4I_SS=m
ARM: multi_v7_defconfig: enable caam crypto module caam crypto module is included in several ARMv7-based SoCs from i.MX, Layerscape, Vybrid families. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-27 19:14:28 +03:00
CONFIG_CRYPTO_DEV_FSL_CAAM=m
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 19:26:54 +03:00
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
ARM: multi_v7_defconfig: Enable s5p-secss driver The Exynos SoC provides a Security SubSystem block for accelerating some cryptographic operations. Enable the driver for it - s5p-secss to utilize the hardware acceleration. Currently the s5p-secss driver supports AES in CBC and ECB modes. However its usefulness could be doubted. Excerpt of tests on Odroid XU3 (Exynos5422), for 256 bit key, encryption, performance CPU freq governor: algorithm | block size [b] | average speed [MB/s] | cbc-aes-s5p | 16 | 11.5 | cbc-aes-s5p | 64 | 25.4 | cbc-aes-s5p | 256 | 41.0 | cbc-aes-s5p | 1024 | 47.4 | cbc-aes-s5p | 8192 | 49.0 | cbc(aes-generic) | 16 | 0.4 | cbc(aes-generic) | 64 | 1.8 | cbc(aes-generic) | 256 | 6.6 | cbc(aes-generic) | 1024 | 25.2 | cbc(aes-generic) | 8192 | 83.1 | Anyway enable the driver so it will get some testing coverage by community. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:15 +02:00
CONFIG_CRYPTO_DEV_S5P=m
ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 10:24:23 -07:00
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
ARM: config: multi v7: Regenerate defconifg These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-06-15 10:44:35 +09:30
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c The DragonBoard 410c is mainly supported by the ARM64 architecture and defconfig, but it can also run well on the ARM32 architecture. Add the necessary options to the multi_v7_defconfig to simplify building an ARM32 kernel for DragonBoard 410c. This is also a possible opportunity to slightly increase CI coverage for older Qualcomm-based ARM32 platforms that are currently not represented well in automated CI setups. The APQ8016 SoC used in DB410c is still quite similar to those. DB410c is already used in some CI systems so the same hardware could be re-used to get some basic ARM32 boot testing. When deciding between built-in (y) and module (m), I usually used the same that is already being used (and functional) in the ARM64 defconfig. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
2021-12-13 12:32:50 +01:00
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCOM_RNG=m
ARM: multi_v7_defconfig: enable rockchip crypto module This enables the newly added hardware crypto module found for example on the rk3288. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 22:21:55 +01:00
CONFIG_CRYPTO_DEV_ROCKCHIP=m
ARM: multi_v7_defconfig: add STM32 crypto support Enable crypto controllers enabling following flags as module: CONFIG_CRYPTO_DEV_STM32_CRC CONFIG_CRYPTO_DEV_STM32_HASH CONFIG_CRYPTO_DEV_STM32_CRYP Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-05 10:47:30 +01:00
CONFIG_CRYPTO_DEV_STM32_CRC=m
CONFIG_CRYPTO_DEV_STM32_HASH=m
CONFIG_CRYPTO_DEV_STM32_CRYP=m
ARM: multi_v7_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-16 07:05:07 -07:00
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
ARM: multi_v7_defconfig: Restore debugfs support Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent additions") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which were enabled by CONFIG_PERF_EVENTS. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06 13:51:12 +01:00
CONFIG_DEBUG_FS=y
Reference in New Issue Copy Permalink