linux/mm/memcontrol.c

5567 lines
144 KiB
C
Raw Normal View History

/* memcontrol.c - Memory Controller
*
* Copyright IBM Corporation, 2007
* Author Balbir Singh <balbir@linux.vnet.ibm.com>
*
* Copyright 2007 OpenVZ SWsoft Inc
* Author: Pavel Emelianov <xemul@openvz.org>
*
* Memory thresholds
* Copyright (C) 2009 Nokia Corporation
* Author: Kirill A. Shutemov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/res_counter.h>
#include <linux/memcontrol.h>
#include <linux/cgroup.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
#include <linux/pagemap.h>
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
#include <linux/smp.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
#include <linux/page-flags.h>
#include <linux/backing-dev.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
#include <linux/bit_spinlock.h>
#include <linux/rcupdate.h>
#include <linux/limits.h>
#include <linux/export.h>
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
#include <linux/mutex.h>
#include <linux/rbtree.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/spinlock.h>
#include <linux/eventfd.h>
#include <linux/sort.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
#include <linux/mm_inline.h>
#include <linux/page_cgroup.h>
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
#include <linux/cpu.h>
#include <linux/oom.h>
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
#include "internal.h"
#include <net/sock.h>
#include <net/tcp_memcontrol.h>
#include <asm/uaccess.h>
#include <trace/events/vmscan.h>
struct cgroup_subsys mem_cgroup_subsys __read_mostly;
#define MEM_CGROUP_RECLAIM_RETRIES 5
struct mem_cgroup *root_mem_cgroup __read_mostly;
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
int do_swap_account __read_mostly;
/* for remember boot option*/
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
static int really_do_swap_account __initdata = 1;
#else
static int really_do_swap_account __initdata = 0;
#endif
#else
#define do_swap_account (0)
#endif
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
/*
* Statistics for memory cgroup.
*/
enum mem_cgroup_stat_index {
/*
* For MEM_CONTAINER_TYPE_ALL, usage = pagecache + rss.
*/
MEM_CGROUP_STAT_CACHE, /* # of pages charged as cache */
MEM_CGROUP_STAT_RSS, /* # of pages charged as anon rss */
MEM_CGROUP_STAT_FILE_MAPPED, /* # of pages charged as file rss */
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
MEM_CGROUP_STAT_SWAPOUT, /* # of pages, swapped out */
MEM_CGROUP_STAT_DATA, /* end of data requires synchronization */
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
MEM_CGROUP_STAT_NSTATS,
};
enum mem_cgroup_events_index {
MEM_CGROUP_EVENTS_PGPGIN, /* # of pages paged in */
MEM_CGROUP_EVENTS_PGPGOUT, /* # of pages paged out */
MEM_CGROUP_EVENTS_COUNT, /* # of pages paged in/out */
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
MEM_CGROUP_EVENTS_PGFAULT, /* # of page-faults */
MEM_CGROUP_EVENTS_PGMAJFAULT, /* # of major page-faults */
MEM_CGROUP_EVENTS_NSTATS,
};
/*
* Per memcg event counter is incremented at every pagein/pageout. With THP,
* it will be incremated by the number of pages. This counter is used for
* for trigger some periodic events. This is straightforward and better
* than using jiffies etc. to handle periodic memcg event.
*/
enum mem_cgroup_events_target {
MEM_CGROUP_TARGET_THRESH,
MEM_CGROUP_TARGET_SOFTLIMIT,
MEM_CGROUP_TARGET_NUMAINFO,
MEM_CGROUP_NTARGETS,
};
#define THRESHOLDS_EVENTS_TARGET (128)
#define SOFTLIMIT_EVENTS_TARGET (1024)
#define NUMAINFO_EVENTS_TARGET (1024)
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
struct mem_cgroup_stat_cpu {
long count[MEM_CGROUP_STAT_NSTATS];
unsigned long events[MEM_CGROUP_EVENTS_NSTATS];
unsigned long targets[MEM_CGROUP_NTARGETS];
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
};
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
struct mem_cgroup_reclaim_iter {
/* css_id of the last scanned hierarchy member */
int position;
/* scan generation, increased every round-trip */
unsigned int generation;
};
/*
* per-zone information in memory controller.
*/
struct mem_cgroup_per_zone {
struct lruvec lruvec;
unsigned long lru_size[NR_LRU_LISTS];
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
struct mem_cgroup_reclaim_iter reclaim_iter[DEF_PRIORITY + 1];
struct zone_reclaim_stat reclaim_stat;
struct rb_node tree_node; /* RB tree node */
unsigned long long usage_in_excess;/* Set to the value by which */
/* the soft limit is exceeded*/
bool on_tree;
struct mem_cgroup *memcg; /* Back pointer, we cannot */
2009-09-24 02:56:39 +04:00
/* use container_of */
};
struct mem_cgroup_per_node {
struct mem_cgroup_per_zone zoneinfo[MAX_NR_ZONES];
};
struct mem_cgroup_lru_info {
struct mem_cgroup_per_node *nodeinfo[MAX_NUMNODES];
};
/*
* Cgroups above their limits are maintained in a RB-Tree, independent of
* their hierarchy representation
*/
struct mem_cgroup_tree_per_zone {
struct rb_root rb_root;
spinlock_t lock;
};
struct mem_cgroup_tree_per_node {
struct mem_cgroup_tree_per_zone rb_tree_per_zone[MAX_NR_ZONES];
};
struct mem_cgroup_tree {
struct mem_cgroup_tree_per_node *rb_tree_per_node[MAX_NUMNODES];
};
static struct mem_cgroup_tree soft_limit_tree __read_mostly;
struct mem_cgroup_threshold {
struct eventfd_ctx *eventfd;
u64 threshold;
};
/* For threshold */
struct mem_cgroup_threshold_ary {
/* An array index points to threshold just below usage. */
int current_threshold;
/* Size of entries[] */
unsigned int size;
/* Array of thresholds */
struct mem_cgroup_threshold entries[0];
};
struct mem_cgroup_thresholds {
/* Primary thresholds array */
struct mem_cgroup_threshold_ary *primary;
/*
* Spare threshold array.
* This is needed to make mem_cgroup_unregister_event() "never fail".
* It must be able to store at least primary->size - 1 entries.
*/
struct mem_cgroup_threshold_ary *spare;
};
/* for OOM */
struct mem_cgroup_eventfd_list {
struct list_head list;
struct eventfd_ctx *eventfd;
};
static void mem_cgroup_threshold(struct mem_cgroup *memcg);
static void mem_cgroup_oom_notify(struct mem_cgroup *memcg);
/*
* The memory controller data structure. The memory controller controls both
* page cache and RSS per cgroup. We would eventually like to provide
* statistics based on the statistics developed by Rik Van Riel for clock-pro,
* to help the administrator determine what knobs to tune.
*
* TODO: Add a water mark for the memory controller. Reclaim will begin when
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
* we hit the water mark. May be even add a low water mark, such that
* no reclaim occurs from a cgroup at it's low water mark, this is
* a feature that will be implemented much later in the future.
*/
struct mem_cgroup {
struct cgroup_subsys_state css;
/*
* the counter to account for memory usage
*/
struct res_counter res;
memcg: free mem_cgroup by RCU to fix oops After fixing the GPF in mem_cgroup_lru_del_list(), three times one machine running a similar load (moving and removing memcgs while swapping) has oopsed in mem_cgroup_zone_nr_lru_pages(), when retrieving memcg zone numbers for get_scan_count() for shrink_mem_cgroup_zone(): this is where a struct mem_cgroup is first accessed after being chosen by mem_cgroup_iter(). Just what protects a struct mem_cgroup from being freed, in between mem_cgroup_iter()'s css_get_next() and its css_tryget()? css_tryget() fails once css->refcnt is zero with CSS_REMOVED set in flags, yes: but what if that memory is freed and reused for something else, which sets "refcnt" non-zero? Hmm, and scope for an indefinite freeze if refcnt is left at zero but flags are cleared. It's tempting to move the css_tryget() into css_get_next(), to make it really "get" the css, but I don't think that actually solves anything: the same difficulty in moving from css_id found to stable css remains. But we already have rcu_read_lock() around the two, so it's easily fixed if __mem_cgroup_free() just uses kfree_rcu() to free mem_cgroup. However, a big struct mem_cgroup is allocated with vzalloc() instead of kzalloc(), and we're not allowed to vfree() at interrupt time: there doesn't appear to be a general vfree_rcu() to help with this, so roll our own using schedule_work(). The compiler decently removes vfree_work() and vfree_rcu() when the config doesn't need them. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16 02:17:07 +04:00
union {
/*
* the counter to account for mem+swap usage.
*/
struct res_counter memsw;
/*
* rcu_freeing is used only when freeing struct mem_cgroup,
* so put it into a union to avoid wasting more memory.
* It must be disjoint from the css field. It could be
* in a union with the res field, but res plays a much
* larger part in mem_cgroup life than memsw, and might
* be of interest, even at time of free, when debugging.
* So share rcu_head with the less interesting memsw.
*/
struct rcu_head rcu_freeing;
/*
* But when using vfree(), that cannot be done at
* interrupt time, so we must then queue the work.
*/
struct work_struct work_freeing;
};
/*
* Per cgroup active and inactive list, similar to the
* per zone LRU lists.
*/
struct mem_cgroup_lru_info info;
int last_scanned_node;
#if MAX_NUMNODES > 1
nodemask_t scan_nodes;
atomic_t numainfo_events;
atomic_t numainfo_updating;
#endif
/*
* Should the accounting and control be hierarchical, per subtree?
*/
bool use_hierarchy;
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
bool oom_lock;
atomic_t under_oom;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
atomic_t refcnt;
int swappiness;
/* OOM-Killer disable */
int oom_kill_disable;
/* set when res.limit == memsw.limit */
bool memsw_is_minimum;
/* protect arrays of thresholds */
struct mutex thresholds_lock;
/* thresholds for memory usage. RCU-protected */
struct mem_cgroup_thresholds thresholds;
/* thresholds for mem+swap usage. RCU-protected */
struct mem_cgroup_thresholds memsw_thresholds;
/* For oom notifier event fd */
struct list_head oom_notify;
/*
* Should we move charges of a task when a task is moved into this
* mem_cgroup ? And what type of charges should we move ?
*/
unsigned long move_charge_at_immigrate;
/*
* set > 0 if pages under this cgroup are moving to other cgroup.
*/
atomic_t moving_account;
/* taken only while moving_account > 0 */
spinlock_t move_lock;
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
/*
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
* percpu counter.
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
*/
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
struct mem_cgroup_stat_cpu *stat;
/*
* used when a cpu is offlined or other synchronizations
* See mem_cgroup_read_stat().
*/
struct mem_cgroup_stat_cpu nocpu_base;
spinlock_t pcp_counter_lock;
#ifdef CONFIG_INET
struct tcp_memcontrol tcp_mem;
#endif
};
/* Stuffs for move charges at task migration. */
/*
* Types of charges to be moved. "move_charge_at_immitgrate" is treated as a
* left-shifted bitmap of these types.
*/
enum move_type {
MOVE_CHARGE_TYPE_ANON, /* private anonymous page and swap of it */
MOVE_CHARGE_TYPE_FILE, /* file page(including tmpfs) and swap of it */
NR_MOVE_TYPE,
};
/* "mc" and its members are protected by cgroup_mutex */
static struct move_charge_struct {
memcg: avoid deadlock between move charge and try_charge() __mem_cgroup_try_charge() can be called under down_write(&mmap_sem)(e.g. mlock does it). This means it can cause deadlock if it races with move charge: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() To avoid this deadlock, we do all the move charge works (both can_attach() and attach()) under one mmap_sem section. And after this patch, we set/clear mc.moving_task outside mc.lock, because we use the lock only to check mc.from/to. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-24 23:57:06 +03:00
spinlock_t lock; /* for from, to */
struct mem_cgroup *from;
struct mem_cgroup *to;
unsigned long precharge;
unsigned long moved_charge;
unsigned long moved_swap;
struct task_struct *moving_task; /* a task moving charges */
wait_queue_head_t waitq; /* a waitq for other context */
} mc = {
.lock = __SPIN_LOCK_UNLOCKED(mc.lock),
.waitq = __WAIT_QUEUE_HEAD_INITIALIZER(mc.waitq),
};
static bool move_anon(void)
{
return test_bit(MOVE_CHARGE_TYPE_ANON,
&mc.to->move_charge_at_immigrate);
}
static bool move_file(void)
{
return test_bit(MOVE_CHARGE_TYPE_FILE,
&mc.to->move_charge_at_immigrate);
}
2009-09-24 02:56:39 +04:00
/*
* Maximum loops in mem_cgroup_hierarchical_reclaim(), used for soft
* limit reclaim to prevent infinite loops, if they ever occur.
*/
#define MEM_CGROUP_MAX_RECLAIM_LOOPS (100)
#define MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS (2)
enum charge_type {
MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
MEM_CGROUP_CHARGE_TYPE_MAPPED,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
MEM_CGROUP_CHARGE_TYPE_SHMEM, /* used by page migration of shmem */
MEM_CGROUP_CHARGE_TYPE_FORCE, /* used by force_empty */
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
MEM_CGROUP_CHARGE_TYPE_SWAPOUT, /* for accounting swapcache */
MEM_CGROUP_CHARGE_TYPE_DROP, /* a page was unused swap cache */
NR_CHARGE_TYPE,
};
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/* for encoding cft->private value on file */
#define _MEM (0)
#define _MEMSWAP (1)
#define _OOM_TYPE (2)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
#define MEMFILE_PRIVATE(x, val) (((x) << 16) | (val))
#define MEMFILE_TYPE(val) (((val) >> 16) & 0xffff)
#define MEMFILE_ATTR(val) ((val) & 0xffff)
/* Used for OOM nofiier */
#define OOM_CONTROL (0)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/*
* Reclaim flags for mem_cgroup_hierarchical_reclaim
*/
#define MEM_CGROUP_RECLAIM_NOSWAP_BIT 0x0
#define MEM_CGROUP_RECLAIM_NOSWAP (1 << MEM_CGROUP_RECLAIM_NOSWAP_BIT)
#define MEM_CGROUP_RECLAIM_SHRINK_BIT 0x1
#define MEM_CGROUP_RECLAIM_SHRINK (1 << MEM_CGROUP_RECLAIM_SHRINK_BIT)
static void mem_cgroup_get(struct mem_cgroup *memcg);
static void mem_cgroup_put(struct mem_cgroup *memcg);
/* Writing them here to avoid exposing memcg's inner layout */
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
#include <net/sock.h>
#include <net/ip.h>
static bool mem_cgroup_is_root(struct mem_cgroup *memcg);
void sock_update_memcg(struct sock *sk)
{
if (mem_cgroup_sockets_enabled) {
struct mem_cgroup *memcg;
BUG_ON(!sk->sk_prot->proto_cgroup);
/* Socket cloning can throw us here with sk_cgrp already
* filled. It won't however, necessarily happen from
* process context. So the test for root memcg given
* the current task's memcg won't help us in this case.
*
* Respecting the original socket's memcg is a better
* decision in this case.
*/
if (sk->sk_cgrp) {
BUG_ON(mem_cgroup_is_root(sk->sk_cgrp->memcg));
mem_cgroup_get(sk->sk_cgrp->memcg);
return;
}
rcu_read_lock();
memcg = mem_cgroup_from_task(current);
if (!mem_cgroup_is_root(memcg)) {
mem_cgroup_get(memcg);
sk->sk_cgrp = sk->sk_prot->proto_cgroup(memcg);
}
rcu_read_unlock();
}
}
EXPORT_SYMBOL(sock_update_memcg);
void sock_release_memcg(struct sock *sk)
{
if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
struct mem_cgroup *memcg;
WARN_ON(!sk->sk_cgrp->memcg);
memcg = sk->sk_cgrp->memcg;
mem_cgroup_put(memcg);
}
}
#ifdef CONFIG_INET
struct cg_proto *tcp_proto_cgroup(struct mem_cgroup *memcg)
{
if (!memcg || mem_cgroup_is_root(memcg))
return NULL;
return &memcg->tcp_mem.cg_proto;
}
EXPORT_SYMBOL(tcp_proto_cgroup);
#endif /* CONFIG_INET */
#endif /* CONFIG_CGROUP_MEM_RES_CTLR_KMEM */
static void drain_all_stock_async(struct mem_cgroup *memcg);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *memcg, int nid, int zid)
{
return &memcg->info.nodeinfo[nid]->zoneinfo[zid];
}
struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg)
{
return &memcg->css;
}
static struct mem_cgroup_per_zone *
page_cgroup_zoneinfo(struct mem_cgroup *memcg, struct page *page)
{
int nid = page_to_nid(page);
int zid = page_zonenum(page);
return mem_cgroup_zoneinfo(memcg, nid, zid);
}
static struct mem_cgroup_tree_per_zone *
soft_limit_tree_node_zone(int nid, int zid)
{
return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
}
static struct mem_cgroup_tree_per_zone *
soft_limit_tree_from_page(struct page *page)
{
int nid = page_to_nid(page);
int zid = page_zonenum(page);
return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
}
static void
__mem_cgroup_insert_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz,
unsigned long long new_usage_in_excess)
{
struct rb_node **p = &mctz->rb_root.rb_node;
struct rb_node *parent = NULL;
struct mem_cgroup_per_zone *mz_node;
if (mz->on_tree)
return;
mz->usage_in_excess = new_usage_in_excess;
if (!mz->usage_in_excess)
return;
while (*p) {
parent = *p;
mz_node = rb_entry(parent, struct mem_cgroup_per_zone,
tree_node);
if (mz->usage_in_excess < mz_node->usage_in_excess)
p = &(*p)->rb_left;
/*
* We can't avoid mem cgroups that are over their soft
* limit by the same amount
*/
else if (mz->usage_in_excess >= mz_node->usage_in_excess)
p = &(*p)->rb_right;
}
rb_link_node(&mz->tree_node, parent, p);
rb_insert_color(&mz->tree_node, &mctz->rb_root);
mz->on_tree = true;
2009-09-24 02:56:39 +04:00
}
static void
__mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
2009-09-24 02:56:39 +04:00
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
if (!mz->on_tree)
return;
rb_erase(&mz->tree_node, &mctz->rb_root);
mz->on_tree = false;
}
static void
mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
spin_lock(&mctz->lock);
__mem_cgroup_remove_exceeded(memcg, mz, mctz);
spin_unlock(&mctz->lock);
}
static void mem_cgroup_update_tree(struct mem_cgroup *memcg, struct page *page)
{
unsigned long long excess;
struct mem_cgroup_per_zone *mz;
struct mem_cgroup_tree_per_zone *mctz;
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
int nid = page_to_nid(page);
int zid = page_zonenum(page);
mctz = soft_limit_tree_from_page(page);
/*
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
* Necessary to update all ancestors when hierarchy is used.
* because their event counter is not touched.
*/
for (; memcg; memcg = parent_mem_cgroup(memcg)) {
mz = mem_cgroup_zoneinfo(memcg, nid, zid);
excess = res_counter_soft_limit_excess(&memcg->res);
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
/*
* We have to update the tree if mz is on RB-tree or
* mem is over its softlimit.
*/
if (excess || mz->on_tree) {
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
spin_lock(&mctz->lock);
/* if on-tree, remove it */
if (mz->on_tree)
__mem_cgroup_remove_exceeded(memcg, mz, mctz);
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
/*
* Insert again. mz->usage_in_excess will be updated.
* If excess is 0, no tree ops.
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
*/
__mem_cgroup_insert_exceeded(memcg, mz, mctz, excess);
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
spin_unlock(&mctz->lock);
}
}
}
static void mem_cgroup_remove_from_trees(struct mem_cgroup *memcg)
{
int node, zone;
struct mem_cgroup_per_zone *mz;
struct mem_cgroup_tree_per_zone *mctz;
for_each_node(node) {
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = mem_cgroup_zoneinfo(memcg, node, zone);
mctz = soft_limit_tree_node_zone(node, zone);
mem_cgroup_remove_exceeded(memcg, mz, mctz);
}
}
}
2009-09-24 02:56:39 +04:00
static struct mem_cgroup_per_zone *
__mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
{
struct rb_node *rightmost = NULL;
memcg: fix refcnt going negative __mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz" with incremnted mz->mem->css's refcnt. Then, the caller of this function has to call css_put(mz->mem->css). But, mz can be !NULL even if "not found" i.e. without css_get(). By this, css->refcnt will go down to minus. This may cause various things...one of results will be initite-loop in css_tryget() as this. INFO: RCU detected CPU 0 stall (t=10000 jiffies) sending NMI to all CPUs: NMI backtrace for cpu 0 CPU 0: <snip> <<EOE>> <IRQ> [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10 [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0 [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70 [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0 [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370 [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130 [<ffffffff81063a26>] update_process_times+0x46/0x70 [<ffffffff81085930>] tick_sched_timer+0x60/0x160 [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160 [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150 [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0 [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180 [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180 [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180 [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110 [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330 [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60 Above shows CPU0 caught in css_tryget()'s inifinite loop because of bad refcnt. This is a fix to set mz=NULL at the top of retry path. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:08 +04:00
struct mem_cgroup_per_zone *mz;
2009-09-24 02:56:39 +04:00
retry:
memcg: fix refcnt going negative __mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz" with incremnted mz->mem->css's refcnt. Then, the caller of this function has to call css_put(mz->mem->css). But, mz can be !NULL even if "not found" i.e. without css_get(). By this, css->refcnt will go down to minus. This may cause various things...one of results will be initite-loop in css_tryget() as this. INFO: RCU detected CPU 0 stall (t=10000 jiffies) sending NMI to all CPUs: NMI backtrace for cpu 0 CPU 0: <snip> <<EOE>> <IRQ> [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10 [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0 [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70 [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0 [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370 [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130 [<ffffffff81063a26>] update_process_times+0x46/0x70 [<ffffffff81085930>] tick_sched_timer+0x60/0x160 [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160 [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150 [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0 [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180 [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180 [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180 [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110 [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330 [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60 Above shows CPU0 caught in css_tryget()'s inifinite loop because of bad refcnt. This is a fix to set mz=NULL at the top of retry path. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:08 +04:00
mz = NULL;
2009-09-24 02:56:39 +04:00
rightmost = rb_last(&mctz->rb_root);
if (!rightmost)
goto done; /* Nothing to reclaim from */
mz = rb_entry(rightmost, struct mem_cgroup_per_zone, tree_node);
/*
* Remove the node now but someone else can add it back,
* we will to add it back at the end of reclaim to its correct
* position in the tree.
*/
__mem_cgroup_remove_exceeded(mz->memcg, mz, mctz);
if (!res_counter_soft_limit_excess(&mz->memcg->res) ||
!css_tryget(&mz->memcg->css))
2009-09-24 02:56:39 +04:00
goto retry;
done:
return mz;
}
static struct mem_cgroup_per_zone *
mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
{
struct mem_cgroup_per_zone *mz;
spin_lock(&mctz->lock);
mz = __mem_cgroup_largest_soft_limit_node(mctz);
spin_unlock(&mctz->lock);
return mz;
}
/*
* Implementation Note: reading percpu statistics for memcg.
*
* Both of vmstat[] and percpu_counter has threshold and do periodic
* synchronization to implement "quick" read. There are trade-off between
* reading cost and precision of value. Then, we may have a chance to implement
* a periodic synchronizion of counter in memcg's counter.
*
* But this _read() function is used for user interface now. The user accounts
* memory usage by memory cgroup and he _always_ requires exact value because
* he accounts memory. Even if we provide quick-and-fuzzy read, we always
* have to visit all online cpus and make sum. So, for now, unnecessary
* synchronization is not implemented. (just implemented for cpu hotplug)
*
* If there are kernel internal actions which can make use of some not-exact
* value, and reading all cpu value can be performance bottleneck in some
* common workload, threashold and synchonization as vmstat[] should be
* implemented.
*/
static long mem_cgroup_read_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
{
long val = 0;
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
int cpu;
get_online_cpus();
for_each_online_cpu(cpu)
val += per_cpu(memcg->stat->count[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
spin_lock(&memcg->pcp_counter_lock);
val += memcg->nocpu_base.count[idx];
spin_unlock(&memcg->pcp_counter_lock);
#endif
put_online_cpus();
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
return val;
}
static void mem_cgroup_swap_statistics(struct mem_cgroup *memcg,
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
bool charge)
{
int val = (charge) ? 1 : -1;
this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
}
static unsigned long mem_cgroup_read_events(struct mem_cgroup *memcg,
enum mem_cgroup_events_index idx)
{
unsigned long val = 0;
int cpu;
for_each_online_cpu(cpu)
val += per_cpu(memcg->stat->events[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
spin_lock(&memcg->pcp_counter_lock);
val += memcg->nocpu_base.events[idx];
spin_unlock(&memcg->pcp_counter_lock);
#endif
return val;
}
static void mem_cgroup_charge_statistics(struct mem_cgroup *memcg,
bool anon, int nr_pages)
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
{
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
preempt_disable();
/*
* Here, RSS means 'mapped anon' and anon's SwapCache. Shmem/tmpfs is
* counted as CACHE even if it's on ANON LRU.
*/
if (anon)
__this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_RSS],
nr_pages);
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
else
__this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_CACHE],
nr_pages);
/* pagein of a big page is an event. So, ignore page size */
if (nr_pages > 0)
__this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGIN]);
else {
__this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGOUT]);
nr_pages = -nr_pages; /* for event */
}
__this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT], nr_pages);
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
preempt_enable();
}
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
unsigned long
mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, int nid, int zid,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
unsigned int lru_mask)
{
struct mem_cgroup_per_zone *mz;
enum lru_list lru;
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
unsigned long ret = 0;
mz = mem_cgroup_zoneinfo(memcg, nid, zid);
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
for_each_lru(lru) {
if (BIT(lru) & lru_mask)
ret += mz->lru_size[lru];
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
}
return ret;
}
static unsigned long
mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
int nid, unsigned int lru_mask)
{
u64 total = 0;
int zid;
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
for (zid = 0; zid < MAX_NR_ZONES; zid++)
total += mem_cgroup_zone_nr_lru_pages(memcg,
nid, zid, lru_mask);
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
return total;
}
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *memcg,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
unsigned int lru_mask)
{
int nid;
u64 total = 0;
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
for_each_node_state(nid, N_HIGH_MEMORY)
total += mem_cgroup_node_nr_lru_pages(memcg, nid, lru_mask);
return total;
memory cgroup enhancements: add status accounting function for memory cgroup Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:24 +03:00
}
static bool mem_cgroup_event_ratelimit(struct mem_cgroup *memcg,
enum mem_cgroup_events_target target)
{
unsigned long val, next;
val = __this_cpu_read(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT]);
next = __this_cpu_read(memcg->stat->targets[target]);
/* from time_after() in jiffies.h */
if ((long)next - (long)val < 0) {
switch (target) {
case MEM_CGROUP_TARGET_THRESH:
next = val + THRESHOLDS_EVENTS_TARGET;
break;
case MEM_CGROUP_TARGET_SOFTLIMIT:
next = val + SOFTLIMIT_EVENTS_TARGET;
break;
case MEM_CGROUP_TARGET_NUMAINFO:
next = val + NUMAINFO_EVENTS_TARGET;
break;
default:
break;
}
__this_cpu_write(memcg->stat->targets[target], next);
return true;
}
return false;
}
/*
* Check events in order.
*
*/
static void memcg_check_events(struct mem_cgroup *memcg, struct page *page)
{
preempt_disable();
/* threshold event is triggered in finer grain than soft limit */
if (unlikely(mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_THRESH))) {
bool do_softlimit;
bool do_numainfo __maybe_unused;
do_softlimit = mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT);
#if MAX_NUMNODES > 1
do_numainfo = mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_NUMAINFO);
#endif
preempt_enable();
mem_cgroup_threshold(memcg);
if (unlikely(do_softlimit))
mem_cgroup_update_tree(memcg, page);
#if MAX_NUMNODES > 1
if (unlikely(do_numainfo))
atomic_inc(&memcg->numainfo_events);
#endif
} else
preempt_enable();
}
struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
{
return container_of(cgroup_subsys_state(cont,
mem_cgroup_subsys_id), struct mem_cgroup,
css);
}
cgroups: add an owner to the mm_struct Remove the mem_cgroup member from mm_struct and instead adds an owner. This approach was suggested by Paul Menage. The advantage of this approach is that, once the mm->owner is known, using the subsystem id, the cgroup can be determined. It also allows several control groups that are virtually grouped by mm_struct, to exist independent of the memory controller i.e., without adding mem_cgroup's for each controller, to mm_struct. A new config option CONFIG_MM_OWNER is added and the memory resource controller selects this config option. This patch also adds cgroup callbacks to notify subsystems when mm->owner changes. The mm_cgroup_changed callback is called with the task_lock() of the new task held and is called just prior to changing the mm->owner. I am indebted to Paul Menage for the several reviews of this patchset and helping me make it lighter and simpler. This patch was tested on a powerpc box, it was compiled with both the MM_OWNER config turned on and off. After the thread group leader exits, it's moved to init_css_state by cgroup_exit(), thus all future charges from runnings threads would be redirected to the init_css_set's subsystem. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: David Rientjes <rientjes@google.com>, Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Reviewed-by: Paul Menage <menage@google.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 12:00:16 +04:00
struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
{
mm owner: fix race between swapoff and exit There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats> or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 02:09:31 +04:00
/*
* mm_update_next_owner() may clear mm->owner to NULL
* if it races with swapoff, page migration, etc.
* So this can be called with p == NULL.
*/
if (unlikely(!p))
return NULL;
return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
struct mem_cgroup, css);
}
struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
struct mem_cgroup *memcg = NULL;
if (!mm)
return NULL;
/*
* Because we have no locks, mm->owner's may be being moved to other
* cgroup. We use css_tryget() here even if this looks
* pessimistic (rather than adding locks here).
*/
rcu_read_lock();
do {
memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
if (unlikely(!memcg))
break;
} while (!css_tryget(&memcg->css));
rcu_read_unlock();
return memcg;
}
/**
* mem_cgroup_iter - iterate over memory cgroup hierarchy
* @root: hierarchy root
* @prev: previously returned memcg, NULL on first invocation
* @reclaim: cookie for shared reclaim walks, NULL for full walks
*
* Returns references to children of the hierarchy below @root, or
* @root itself, or %NULL after a full round-trip.
*
* Caller must pass the return value in @prev on subsequent
* invocations for reference counting, or use mem_cgroup_iter_break()
* to cancel a hierarchy walk before the round-trip is complete.
*
* Reclaimers can specify a zone and a priority level in @reclaim to
* divide up the memcgs in the hierarchy among all concurrent
* reclaimers operating on the same zone and priority.
*/
struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root,
struct mem_cgroup *prev,
struct mem_cgroup_reclaim_cookie *reclaim)
{
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
struct mem_cgroup *memcg = NULL;
int id = 0;
if (mem_cgroup_disabled())
return NULL;
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (!root)
root = root_mem_cgroup;
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (prev && !reclaim)
id = css_id(&prev->css);
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (prev && prev != root)
css_put(&prev->css);
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (!root->use_hierarchy && root != root_mem_cgroup) {
if (prev)
return NULL;
return root;
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
while (!memcg) {
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
struct mem_cgroup_reclaim_iter *uninitialized_var(iter);
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
struct cgroup_subsys_state *css;
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
if (reclaim) {
int nid = zone_to_nid(reclaim->zone);
int zid = zone_idx(reclaim->zone);
struct mem_cgroup_per_zone *mz;
mz = mem_cgroup_zoneinfo(root, nid, zid);
iter = &mz->reclaim_iter[reclaim->priority];
if (prev && reclaim->generation != iter->generation)
return NULL;
id = iter->position;
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
rcu_read_lock();
css = css_get_next(&mem_cgroup_subsys, id + 1, &root->css, &id);
if (css) {
if (css == &root->css || css_tryget(css))
memcg = container_of(css,
struct mem_cgroup, css);
} else
id = 0;
rcu_read_unlock();
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
if (reclaim) {
iter->position = id;
if (!css)
iter->generation++;
else if (!prev && memcg)
reclaim->generation = iter->generation;
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (prev && !css)
return NULL;
}
return memcg;
}
/**
* mem_cgroup_iter_break - abort a hierarchy walk prematurely
* @root: hierarchy root
* @prev: last visited hierarchy member as returned by mem_cgroup_iter()
*/
void mem_cgroup_iter_break(struct mem_cgroup *root,
struct mem_cgroup *prev)
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
{
if (!root)
root = root_mem_cgroup;
if (prev && prev != root)
css_put(&prev->css);
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
/*
* Iteration constructs for visiting all cgroups (under a tree). If
* loops are exited prematurely (break), mem_cgroup_iter_break() must
* be used for reference counting.
*/
#define for_each_mem_cgroup_tree(iter, root) \
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
for (iter = mem_cgroup_iter(root, NULL, NULL); \
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
iter != NULL; \
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
iter = mem_cgroup_iter(root, iter, NULL))
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
#define for_each_mem_cgroup(iter) \
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
for (iter = mem_cgroup_iter(NULL, NULL, NULL); \
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
iter != NULL; \
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
iter = mem_cgroup_iter(NULL, iter, NULL))
static inline bool mem_cgroup_is_root(struct mem_cgroup *memcg)
{
return (memcg == root_mem_cgroup);
}
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx)
{
struct mem_cgroup *memcg;
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
if (!mm)
return;
rcu_read_lock();
memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
if (unlikely(!memcg))
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
goto out;
switch (idx) {
case PGFAULT:
this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGFAULT]);
break;
case PGMAJFAULT:
this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGMAJFAULT]);
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
break;
default:
BUG();
}
out:
rcu_read_unlock();
}
EXPORT_SYMBOL(mem_cgroup_count_vm_event);
/**
* mem_cgroup_zone_lruvec - get the lru list vector for a zone and memcg
* @zone: zone of the wanted lruvec
* @mem: memcg of the wanted lruvec
*
* Returns the lru list vector holding pages for the given @zone and
* @mem. This can be the global zone lruvec, if the memory controller
* is disabled.
*/
struct lruvec *mem_cgroup_zone_lruvec(struct zone *zone,
struct mem_cgroup *memcg)
{
struct mem_cgroup_per_zone *mz;
if (mem_cgroup_disabled())
return &zone->lruvec;
mz = mem_cgroup_zoneinfo(memcg, zone_to_nid(zone), zone_idx(zone));
return &mz->lruvec;
}
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
/*
* Following LRU functions are allowed to be used without PCG_LOCK.
* Operations are called by routine of global LRU independently from memcg.
* What we have to take care of here is validness of pc->mem_cgroup.
*
* Changes to pc->mem_cgroup happens when
* 1. charge
* 2. moving account
* In typical case, "charge" is done before add-to-lru. Exception is SwapCache.
* It is added to LRU before charge.
* If PCG_USED bit is not set, page_cgroup is not added to this private LRU.
* When moving account, the page is not on LRU. It's isolated.
*/
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
/**
* mem_cgroup_lru_add_list - account for adding an lru page and return lruvec
* @zone: zone of the page
* @page: the page
* @lru: current lru
*
* This function accounts for @page being added to @lru, and returns
* the lruvec for the given @zone and the memcg @page is charged to.
*
* The callsite is then responsible for physically linking the page to
* the returned lruvec->lists[@lru].
*/
struct lruvec *mem_cgroup_lru_add_list(struct zone *zone, struct page *page,
enum lru_list lru)
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
{
struct mem_cgroup_per_zone *mz;
struct mem_cgroup *memcg;
struct page_cgroup *pc;
if (mem_cgroup_disabled())
return &zone->lruvec;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
pc = lookup_page_cgroup(page);
memcg = pc->mem_cgroup;
memcg: fix GPF when cgroup removal races with last exit When moving tasks from old memcg (with move_charge_at_immigrate on new memcg), followed by removal of old memcg, hit General Protection Fault in mem_cgroup_lru_del_list() (called from release_pages called from free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from exit_mmap from mmput from exit_mm from do_exit). Somewhat reproducible, takes a few hours: the old struct mem_cgroup has been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is still trying to update its stats, and take page off lru before freeing. A task, or a charge, or a page on lru: each secures a memcg against removal. In this case, the last task has been moved out of the old memcg, and it is exiting: anonymous pages are uncharged one by one from the memcg, as they are zapped from its pagetables, so the charge gets down to 0; but the pages themselves are queued in an mmu_gather for freeing. Most of those pages will be on lru (and force_empty is careful to lru_add_drain_all, to add pages from pagevec to lru first), but not necessarily all: perhaps some have been isolated for page reclaim, perhaps some isolated for other reasons. So, force_empty may find no task, no charge and no page on lru, and let the removal proceed. There would still be no problem if these pages were immediately freed; but typically (and the put_page_testzero protocol demands it) they have to be added back to lru before they are found freeable, then removed from lru and freed. We don't see the issue when adding, because the mem_cgroup_iter() loops keep their own reference to the memcg being scanned; but when it comes to mem_cgroup_lru_del_list(). I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and PageCgroupUsed flags were used (like a trick with mirrors) to deflect view of pc->mem_cgroup to the stable root_mem_cgroup when neither set. 38c5d72f3ebe ("memcg: simplify LRU handling by new rule") mercifully removed those convolutions, but left this General Protection Fault. But it's surprisingly easy to restore the old behaviour: just check PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec to add), and reset pc to root_mem_cgroup if page is uncharged. A risky change? just going back to how it worked before; testing, and an audit of uses of pc->mem_cgroup, show no problem. And there's a nice bonus: with mem_cgroup_lru_add_list() itself making sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no longer has any purpose, and we can safely revert 4e5f01c2b9b9 ("memcg: clear pc->mem_cgroup if necessary"). Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c is not strictly necessary: the lru_lock there, with RCU before memcg structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe without that; but it seems cleaner to rely on one dependency less. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-06 02:59:18 +04:00
/*
* Surreptitiously switch any uncharged page to root:
* an uncharged page off lru does nothing to secure
* its former mem_cgroup from sudden removal.
*
* Our caller holds lru_lock, and PageCgroupUsed is updated
* under page_cgroup lock: between them, they make all uses
* of pc->mem_cgroup safe.
*/
if (!PageCgroupUsed(pc) && memcg != root_mem_cgroup)
pc->mem_cgroup = memcg = root_mem_cgroup;
mz = page_cgroup_zoneinfo(memcg, page);
/* compound_order() is stabilized through lru_lock */
mz->lru_size[lru] += 1 << compound_order(page);
return &mz->lruvec;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
}
/**
* mem_cgroup_lru_del_list - account for removing an lru page
* @page: the page
* @lru: target lru
*
* This function accounts for @page being removed from @lru.
*
* The callsite is then responsible for physically unlinking
* @page->lru.
*/
void mem_cgroup_lru_del_list(struct page *page, enum lru_list lru)
{
struct mem_cgroup_per_zone *mz;
struct mem_cgroup *memcg;
struct page_cgroup *pc;
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
memcg = pc->mem_cgroup;
VM_BUG_ON(!memcg);
mz = page_cgroup_zoneinfo(memcg, page);
/* huge page split is done under lru_lock. so, we have no races. */
VM_BUG_ON(mz->lru_size[lru] < (1 << compound_order(page)));
mz->lru_size[lru] -= 1 << compound_order(page);
}
void mem_cgroup_lru_del(struct page *page)
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
{
mem_cgroup_lru_del_list(page, page_lru(page));
}
/**
* mem_cgroup_lru_move_lists - account for moving a page between lrus
* @zone: zone of the page
* @page: the page
* @from: current lru
* @to: target lru
*
* This function accounts for @page being moved between the lrus @from
* and @to, and returns the lruvec for the given @zone and the memcg
* @page is charged to.
*
* The callsite is then responsible for physically relinking
* @page->lru to the returned lruvec->lists[@to].
*/
struct lruvec *mem_cgroup_lru_move_lists(struct zone *zone,
struct page *page,
enum lru_list from,
enum lru_list to)
{
/* XXX: Optimize this, especially for @from == @to */
mem_cgroup_lru_del_list(page, from);
return mem_cgroup_lru_add_list(zone, page, to);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
}
/*
* Checks whether given mem is same or in the root_mem_cgroup's
* hierarchy subtree
*/
static bool mem_cgroup_same_or_subtree(const struct mem_cgroup *root_memcg,
struct mem_cgroup *memcg)
{
if (root_memcg != memcg) {
return (root_memcg->use_hierarchy &&
css_is_ancestor(&memcg->css, &root_memcg->css));
}
return true;
}
int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg)
{
int ret;
struct mem_cgroup *curr = NULL;
struct task_struct *p;
p = find_lock_task_mm(task);
oom, memcg: fix exclusion of memcg threads after they have detached their mm The oom killer relies on logic that identifies threads that have already been oom killed when scanning the tasklist and, if found, deferring until such threads have exited. This is done by checking for any candidate threads that have the TIF_MEMDIE bit set. For memcg ooms, candidate threads are first found by calling task_in_mem_cgroup() since the oom killer should not defer if there's an oom killed thread in another memcg. Unfortunately, task_in_mem_cgroup() excludes threads if they have detached their mm in the process of exiting so TIF_MEMDIE is never detected for such conditions. This is different for global, mempolicy, and cpuset oom conditions where a detached mm is only excluded after checking for TIF_MEMDIE and deferring, if necessary, in select_bad_process(). The fix is to return true if a task has a detached mm but is still in the memcg or its hierarchy that is currently oom. This will allow the oom killer to appropriately defer rather than kill unnecessarily or, in the worst case, panic the machine if nothing else is available to kill. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:18:52 +04:00
if (p) {
curr = try_get_mem_cgroup_from_mm(p->mm);
task_unlock(p);
} else {
/*
* All threads may have already detached their mm's, but the oom
* killer still needs to detect if they have already been oom
* killed to prevent needlessly killing additional tasks.
*/
task_lock(task);
curr = mem_cgroup_from_task(task);
if (curr)
css_get(&curr->css);
task_unlock(task);
}
if (!curr)
return 0;
/*
* We should check use_hierarchy of "memcg" not "curr". Because checking
* use_hierarchy of "curr" here make this function true if hierarchy is
* enabled in "curr" and "curr" is a child of "memcg" in *cgroup*
* hierarchy(even if use_hierarchy is disabled in "memcg").
*/
ret = mem_cgroup_same_or_subtree(memcg, curr);
css_put(&curr->css);
return ret;
}
int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
unsigned long inactive_ratio;
int nid = zone_to_nid(zone);
int zid = zone_idx(zone);
unsigned long inactive;
unsigned long active;
unsigned long gb;
inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
BIT(LRU_INACTIVE_ANON));
active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
BIT(LRU_ACTIVE_ANON));
gb = (inactive + active) >> (30 - PAGE_SHIFT);
if (gb)
inactive_ratio = int_sqrt(10 * gb);
else
inactive_ratio = 1;
return inactive * inactive_ratio < active;
}
int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
unsigned long active;
unsigned long inactive;
int zid = zone_idx(zone);
int nid = zone_to_nid(zone);
inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
BIT(LRU_INACTIVE_FILE));
active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
BIT(LRU_ACTIVE_FILE));
return (active > inactive);
}
struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg,
struct zone *zone)
{
int nid = zone_to_nid(zone);
int zid = zone_idx(zone);
struct mem_cgroup_per_zone *mz = mem_cgroup_zoneinfo(memcg, nid, zid);
return &mz->reclaim_stat;
}
struct zone_reclaim_stat *
mem_cgroup_get_reclaim_stat_from_page(struct page *page)
{
struct page_cgroup *pc;
struct mem_cgroup_per_zone *mz;
if (mem_cgroup_disabled())
return NULL;
pc = lookup_page_cgroup(page);
memcg: fix mem_cgroup_get_reclaim_stat_from_page In case of swapin, a new page is added to lru before it is charged, so page->pc->mem_cgroup points to NULL or last mem_cgroup the page was charged before. In the latter case, if the mem_cgroup has already freed by rmdir, the area pointed to by page->pc->mem_cgroup may have invalid data. Actually, I saw general protection fault. general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map CPU 4 Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode] Pid: 26038, comm: page01 Tainted: G W 2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1 RIP: 0010:[<ffffffff8028e710>] [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42 RSP: 0000:ffff8801ee457da8 EFLAGS: 00010002 RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8 RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28 RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001 R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000 R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2 FS: 00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960) Stack: ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17 ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000 ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8 Call Trace: [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89 [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98 [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741 [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff804d860f>] ? page_fault+0x1f/0x30 Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54 RIP [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42 RSP <ffff8801ee457da8> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16 00:51:11 +03:00
if (!PageCgroupUsed(pc))
return NULL;
/* Ensure pc->mem_cgroup is visible after reading PCG_USED. */
smp_rmb();
mz = page_cgroup_zoneinfo(pc->mem_cgroup, page);
return &mz->reclaim_stat;
}
#define mem_cgroup_from_res_counter(counter, member) \
container_of(counter, struct mem_cgroup, member)
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
* @mem: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
*/
static unsigned long mem_cgroup_margin(struct mem_cgroup *memcg)
{
unsigned long long margin;
margin = res_counter_margin(&memcg->res);
if (do_swap_account)
margin = min(margin, res_counter_margin(&memcg->memsw));
return margin >> PAGE_SHIFT;
}
int mem_cgroup_swappiness(struct mem_cgroup *memcg)
{
struct cgroup *cgrp = memcg->css.cgroup;
/* root ? */
if (cgrp->parent == NULL)
return vm_swappiness;
return memcg->swappiness;
}
/*
* memcg->moving_account is used for checking possibility that some thread is
* calling move_account(). When a thread on CPU-A starts moving pages under
* a memcg, other threads should check memcg->moving_account under
* rcu_read_lock(), like this:
*
* CPU-A CPU-B
* rcu_read_lock()
* memcg->moving_account+1 if (memcg->mocing_account)
* take heavy locks.
* synchronize_rcu() update something.
* rcu_read_unlock()
* start move here.
*/
static void mem_cgroup_start_move(struct mem_cgroup *memcg)
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
{
atomic_inc(&memcg->moving_account);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
synchronize_rcu();
}
static void mem_cgroup_end_move(struct mem_cgroup *memcg)
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
{
/*
* Now, mem_cgroup_clear_mc() may call this function with NULL.
* We check NULL in callee rather than caller.
*/
if (memcg)
atomic_dec(&memcg->moving_account);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
}
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
/*
* 2 routines for checking "mem" is under move_account() or not.
*
* mem_cgroup_stealed() - checking a cgroup is mc.from or not. This is used
* for avoiding race in accounting. If true,
* pc->mem_cgroup may be overwritten.
*
* mem_cgroup_under_move() - checking a cgroup is mc.from or mc.to or
* under hierarchy of moving cgroups. This is for
* waiting at hith-memory prressure caused by "move".
*/
static bool mem_cgroup_stealed(struct mem_cgroup *memcg)
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
{
VM_BUG_ON(!rcu_read_lock_held());
return atomic_read(&memcg->moving_account) > 0;
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
}
static bool mem_cgroup_under_move(struct mem_cgroup *memcg)
{
struct mem_cgroup *from;
struct mem_cgroup *to;
bool ret = false;
/*
* Unlike task_move routines, we access mc.to, mc.from not under
* mutual exclusion by cgroup_mutex. Here, we take spinlock instead.
*/
spin_lock(&mc.lock);
from = mc.from;
to = mc.to;
if (!from)
goto unlock;
ret = mem_cgroup_same_or_subtree(memcg, from)
|| mem_cgroup_same_or_subtree(memcg, to);
unlock:
spin_unlock(&mc.lock);
return ret;
}
static bool mem_cgroup_wait_acct_move(struct mem_cgroup *memcg)
{
if (mc.moving_task && current != mc.moving_task) {
if (mem_cgroup_under_move(memcg)) {
DEFINE_WAIT(wait);
prepare_to_wait(&mc.waitq, &wait, TASK_INTERRUPTIBLE);
/* moving charge context might have finished. */
if (mc.moving_task)
schedule();
finish_wait(&mc.waitq, &wait);
return true;
}
}
return false;
}
/*
* Take this lock when
* - a code tries to modify page's memcg while it's USED.
* - a code tries to modify page state accounting in a memcg.
* see mem_cgroup_stealed(), too.
*/
static void move_lock_mem_cgroup(struct mem_cgroup *memcg,
unsigned long *flags)
{
spin_lock_irqsave(&memcg->move_lock, *flags);
}
static void move_unlock_mem_cgroup(struct mem_cgroup *memcg,
unsigned long *flags)
{
spin_unlock_irqrestore(&memcg->move_lock, *flags);
}
/**
* mem_cgroup_print_oom_info: Called from OOM with tasklist_lock held in read mode.
* @memcg: The memory cgroup that went over limit
* @p: Task that is going to be killed
*
* NOTE: @memcg and @p's mem_cgroup can be different when hierarchy is
* enabled
*/
void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
{
struct cgroup *task_cgrp;
struct cgroup *mem_cgrp;
/*
* Need a buffer in BSS, can't rely on allocations. The code relies
* on the assumption that OOM is serialized for memory controller.
* If this assumption is broken, revisit this code.
*/
static char memcg_name[PATH_MAX];
int ret;
if (!memcg || !p)
return;
rcu_read_lock();
mem_cgrp = memcg->css.cgroup;
task_cgrp = task_cgroup(p, mem_cgroup_subsys_id);
ret = cgroup_path(task_cgrp, memcg_name, PATH_MAX);
if (ret < 0) {
/*
* Unfortunately, we are unable to convert to a useful name
* But we'll still print out the usage information
*/
rcu_read_unlock();
goto done;
}
rcu_read_unlock();
printk(KERN_INFO "Task in %s killed", memcg_name);
rcu_read_lock();
ret = cgroup_path(mem_cgrp, memcg_name, PATH_MAX);
if (ret < 0) {
rcu_read_unlock();
goto done;
}
rcu_read_unlock();
/*
* Continues from above, so we don't need an KERN_ level
*/
printk(KERN_CONT " as a result of limit of %s\n", memcg_name);
done:
printk(KERN_INFO "memory: usage %llukB, limit %llukB, failcnt %llu\n",
res_counter_read_u64(&memcg->res, RES_USAGE) >> 10,
res_counter_read_u64(&memcg->res, RES_LIMIT) >> 10,
res_counter_read_u64(&memcg->res, RES_FAILCNT));
printk(KERN_INFO "memory+swap: usage %llukB, limit %llukB, "
"failcnt %llu\n",
res_counter_read_u64(&memcg->memsw, RES_USAGE) >> 10,
res_counter_read_u64(&memcg->memsw, RES_LIMIT) >> 10,
res_counter_read_u64(&memcg->memsw, RES_FAILCNT));
}
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
/*
* This function returns the number of memcg under hierarchy tree. Returns
* 1(self count) if no children.
*/
static int mem_cgroup_count_children(struct mem_cgroup *memcg)
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
{
int num = 0;
struct mem_cgroup *iter;
for_each_mem_cgroup_tree(iter, memcg)
num++;
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
return num;
}
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 04:19:46 +04:00
/*
* Return the memory (and swap, if configured) limit for a memcg.
*/
u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
{
u64 limit;
u64 memsw;
limit = res_counter_read_u64(&memcg->res, RES_LIMIT);
limit += total_swap_pages << PAGE_SHIFT;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 04:19:46 +04:00
memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
/*
* If memsw is finite and limits the amount of swap space available
* to this memcg, return that limit.
*/
return min(limit, memsw);
}
static unsigned long mem_cgroup_reclaim(struct mem_cgroup *memcg,
gfp_t gfp_mask,
unsigned long flags)
{
unsigned long total = 0;
bool noswap = false;
int loop;
if (flags & MEM_CGROUP_RECLAIM_NOSWAP)
noswap = true;
if (!(flags & MEM_CGROUP_RECLAIM_SHRINK) && memcg->memsw_is_minimum)
noswap = true;
for (loop = 0; loop < MEM_CGROUP_MAX_RECLAIM_LOOPS; loop++) {
if (loop)
drain_all_stock_async(memcg);
total += try_to_free_mem_cgroup_pages(memcg, gfp_mask, noswap);
/*
* Allow limit shrinkers, which are triggered directly
* by userspace, to catch signals and stop reclaim
* after minimal progress, regardless of the margin.
*/
if (total && (flags & MEM_CGROUP_RECLAIM_SHRINK))
break;
if (mem_cgroup_margin(memcg))
break;
/*
* If nothing was reclaimed after two attempts, there
* may be no reclaimable pages in this hierarchy.
*/
if (loop && !total)
break;
}
return total;
}
/**
* test_mem_cgroup_node_reclaimable
* @mem: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
* This function returns whether the specified memcg contains any
* reclaimable pages on a node. Returns true if there are any reclaimable
* pages in the node.
*/
static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *memcg,
int nid, bool noswap)
{
if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_FILE))
return true;
if (noswap || !total_swap_pages)
return false;
if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_ANON))
return true;
return false;
}
#if MAX_NUMNODES > 1
/*
* Always updating the nodemask is not very good - even if we have an empty
* list or the wrong list here, we can start from some node and traverse all
* nodes based on the zonelist. So update the list loosely once per 10 secs.
*
*/
static void mem_cgroup_may_update_nodemask(struct mem_cgroup *memcg)
{
int nid;
/*
* numainfo_events > 0 means there was at least NUMAINFO_EVENTS_TARGET
* pagein/pageout changes since the last update.
*/
if (!atomic_read(&memcg->numainfo_events))
return;
if (atomic_inc_return(&memcg->numainfo_updating) > 1)
return;
/* make a nodemask where this memcg uses memory from */
memcg->scan_nodes = node_states[N_HIGH_MEMORY];
for_each_node_mask(nid, node_states[N_HIGH_MEMORY]) {
if (!test_mem_cgroup_node_reclaimable(memcg, nid, false))
node_clear(nid, memcg->scan_nodes);
}
atomic_set(&memcg->numainfo_events, 0);
atomic_set(&memcg->numainfo_updating, 0);
}
/*
* Selecting a node where we start reclaim from. Because what we need is just
* reducing usage counter, start from anywhere is O,K. Considering
* memory reclaim from current node, there are pros. and cons.
*
* Freeing memory from current node means freeing memory from a node which
* we'll use or we've used. So, it may make LRU bad. And if several threads
* hit limits, it will see a contention on a node. But freeing from remote
* node means more costs for memory reclaim because of memory latency.
*
* Now, we use round-robin. Better algorithm is welcomed.
*/
int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
int node;
mem_cgroup_may_update_nodemask(memcg);
node = memcg->last_scanned_node;
node = next_node(node, memcg->scan_nodes);
if (node == MAX_NUMNODES)
node = first_node(memcg->scan_nodes);
/*
* We call this when we hit limit, not when pages are added to LRU.
* No LRU may hold pages because all pages are UNEVICTABLE or
* memcg is too small and all pages are not on LRU. In that case,
* we use curret node.
*/
if (unlikely(node == MAX_NUMNODES))
node = numa_node_id();
memcg->last_scanned_node = node;
return node;
}
/*
* Check all nodes whether it contains reclaimable pages or not.
* For quick scan, we make use of scan_nodes. This will allow us to skip
* unused nodes. But scan_nodes is lazily updated and may not cotain
* enough new information. We need to do double check.
*/
bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
int nid;
/*
* quick check...making use of scan_node.
* We can skip unused nodes.
*/
if (!nodes_empty(memcg->scan_nodes)) {
for (nid = first_node(memcg->scan_nodes);
nid < MAX_NUMNODES;
nid = next_node(nid, memcg->scan_nodes)) {
if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
}
/*
* Check rest of nodes.
*/
for_each_node_state(nid, N_HIGH_MEMORY) {
if (node_isset(nid, memcg->scan_nodes))
continue;
if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
return false;
}
#else
int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
return 0;
}
bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
return test_mem_cgroup_node_reclaimable(memcg, 0, noswap);
}
#endif
static int mem_cgroup_soft_reclaim(struct mem_cgroup *root_memcg,
struct zone *zone,
gfp_t gfp_mask,
unsigned long *total_scanned)
{
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
struct mem_cgroup *victim = NULL;
int total = 0;
int loop = 0;
unsigned long excess;
unsigned long nr_scanned;
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
struct mem_cgroup_reclaim_cookie reclaim = {
.zone = zone,
.priority = 0,
};
excess = res_counter_soft_limit_excess(&root_memcg->res) >> PAGE_SHIFT;
2009-09-24 02:56:39 +04:00
while (1) {
mm: memcg: per-priority per-zone hierarchy scan generations Memory cgroup limit reclaim currently picks one memory cgroup out of the target hierarchy, remembers it as the last scanned child, and reclaims all zones in it with decreasing priority levels. The new hierarchy reclaim code will pick memory cgroups from the same hierarchy concurrently from different zones and priority levels, it becomes necessary that hierarchy roots not only remember the last scanned child, but do so for each zone and priority level. Until now, we reclaimed memcgs like this: mem = mem_cgroup_iter(root) for each priority level: for each zone in zonelist: reclaim(mem, zone) But subsequent patches will move the memcg iteration inside the loop over the zones: for each priority level: for each zone in zonelist: mem = mem_cgroup_iter(root) reclaim(mem, zone) And to keep with the original scan order - memcg -> priority -> zone - the last scanned memcg has to be remembered per zone and per priority level. Furthermore, global reclaim will be switched to the hierarchy walk as well. Different from limit reclaim, which can just recheck the limit after some reclaim progress, its target is to scan all memcgs for the desired zone pages, proportional to the memcg size, and so reliably detecting a full hierarchy round-trip will become crucial. Currently, the code relies on one reclaimer encountering the same memcg twice, but that is error-prone with concurrent reclaimers. Instead, use a generation counter that is increased every time the child with the highest ID has been visited, so that reclaimers can stop when the generation changes. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:55 +04:00
victim = mem_cgroup_iter(root_memcg, victim, &reclaim);
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
if (!victim) {
loop++;
2009-09-24 02:56:39 +04:00
if (loop >= 2) {
/*
* If we have not been able to reclaim
* anything, it might because there are
* no reclaimable pages under this hierarchy
*/
if (!total)
2009-09-24 02:56:39 +04:00
break;
/*
* We want to do more targeted reclaim.
2009-09-24 02:56:39 +04:00
* excess >> 2 is not to excessive so as to
* reclaim too much, nor too less that we keep
* coming back to reclaim from this cgroup
*/
if (total >= (excess >> 2) ||
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
(loop > MEM_CGROUP_MAX_RECLAIM_LOOPS))
2009-09-24 02:56:39 +04:00
break;
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
continue;
2009-09-24 02:56:39 +04:00
}
if (!mem_cgroup_reclaimable(victim, false))
continue;
total += mem_cgroup_shrink_node_zone(victim, gfp_mask, false,
zone, &nr_scanned);
*total_scanned += nr_scanned;
if (!res_counter_soft_limit_excess(&root_memcg->res))
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
break;
}
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
mem_cgroup_iter_break(root_memcg, victim);
return total;
}
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
/*
* Check OOM-Killer is already running under our hierarchy.
* If someone is running, return false.
* Has to be called with memcg_oom_lock
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
*/
static bool mem_cgroup_oom_lock(struct mem_cgroup *memcg)
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
{
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
struct mem_cgroup *iter, *failed = NULL;
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
for_each_mem_cgroup_tree(iter, memcg) {
if (iter->oom_lock) {
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
/*
* this subtree of our hierarchy is already locked
* so we cannot give a lock.
*/
failed = iter;
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
mem_cgroup_iter_break(memcg, iter);
break;
} else
iter->oom_lock = true;
}
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
if (!failed)
return true;
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
/*
* OK, we failed to lock the whole subtree so we have to clean up
* what we set up to the failing subtree
*/
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
for_each_mem_cgroup_tree(iter, memcg) {
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
if (iter == failed) {
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
mem_cgroup_iter_break(memcg, iter);
break;
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
}
iter->oom_lock = false;
}
return false;
}
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
/*
* Has to be called with memcg_oom_lock
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
*/
static int mem_cgroup_oom_unlock(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
for_each_mem_cgroup_tree(iter, memcg)
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
iter->oom_lock = false;
return 0;
}
static void mem_cgroup_mark_under_oom(struct mem_cgroup *memcg)
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
{
struct mem_cgroup *iter;
for_each_mem_cgroup_tree(iter, memcg)
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
atomic_inc(&iter->under_oom);
}
static void mem_cgroup_unmark_under_oom(struct mem_cgroup *memcg)
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
{
struct mem_cgroup *iter;
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
/*
* When a new child is created while the hierarchy is under oom,
* mem_cgroup_oom_lock() may not be called. We have to use
* atomic_add_unless() here.
*/
for_each_mem_cgroup_tree(iter, memcg)
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
atomic_add_unless(&iter->under_oom, -1, 0);
}
static DEFINE_SPINLOCK(memcg_oom_lock);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
static DECLARE_WAIT_QUEUE_HEAD(memcg_oom_waitq);
struct oom_wait_info {
struct mem_cgroup *memcg;
wait_queue_t wait;
};
static int memcg_oom_wake_function(wait_queue_t *wait,
unsigned mode, int sync, void *arg)
{
struct mem_cgroup *wake_memcg = (struct mem_cgroup *)arg;
struct mem_cgroup *oom_wait_memcg;
struct oom_wait_info *oom_wait_info;
oom_wait_info = container_of(wait, struct oom_wait_info, wait);
oom_wait_memcg = oom_wait_info->memcg;
/*
* Both of oom_wait_info->memcg and wake_memcg are stable under us.
* Then we can use css_is_ancestor without taking care of RCU.
*/
if (!mem_cgroup_same_or_subtree(oom_wait_memcg, wake_memcg)
&& !mem_cgroup_same_or_subtree(wake_memcg, oom_wait_memcg))
return 0;
return autoremove_wake_function(wait, mode, sync, arg);
}
static void memcg_wakeup_oom(struct mem_cgroup *memcg)
{
/* for filtering, pass "memcg" as argument. */
__wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, memcg);
}
static void memcg_oom_recover(struct mem_cgroup *memcg)
{
if (memcg && atomic_read(&memcg->under_oom))
memcg_wakeup_oom(memcg);
}
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
/*
* try to call OOM killer. returns false if we should exit memory-reclaim loop.
*/
bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
{
struct oom_wait_info owait;
bool locked, need_to_kill;
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
owait.memcg = memcg;
owait.wait.flags = 0;
owait.wait.func = memcg_oom_wake_function;
owait.wait.private = current;
INIT_LIST_HEAD(&owait.wait.task_list);
need_to_kill = true;
mem_cgroup_mark_under_oom(memcg);
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
/* At first, try to OOM lock hierarchy under memcg.*/
spin_lock(&memcg_oom_lock);
locked = mem_cgroup_oom_lock(memcg);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
/*
* Even if signal_pending(), we can't quit charge() loop without
* accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
* under OOM is always welcomed, use TASK_KILLABLE here.
*/
prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
if (!locked || memcg->oom_kill_disable)
need_to_kill = false;
if (locked)
mem_cgroup_oom_notify(memcg);
spin_unlock(&memcg_oom_lock);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
if (need_to_kill) {
finish_wait(&memcg_oom_waitq, &owait.wait);
mem_cgroup_out_of_memory(memcg, mask, order);
} else {
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
schedule();
finish_wait(&memcg_oom_waitq, &owait.wait);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
}
spin_lock(&memcg_oom_lock);
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
if (locked)
mem_cgroup_oom_unlock(memcg);
memcg_wakeup_oom(memcg);
spin_unlock(&memcg_oom_lock);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
mem_cgroup_unmark_under_oom(memcg);
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
return false;
/* Give chance to dying process */
schedule_timeout_uninterruptible(1);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
return true;
}
/*
* Currently used to update mapped file statistics, but the routine can be
* generalized to update other statistics as well.
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
*
* Notes: Race condition
*
* We usually use page_cgroup_lock() for accessing page_cgroup member but
* it tends to be costly. But considering some conditions, we doesn't need
* to do so _always_.
*
* Considering "charge", lock_page_cgroup() is not required because all
* file-stat operations happen after a page is attached to radix-tree. There
* are no race with "charge".
*
* Considering "uncharge", we know that memcg doesn't clear pc->mem_cgroup
* at "uncharge" intentionally. So, we always see valid pc->mem_cgroup even
* if there are race with "uncharge". Statistics itself is properly handled
* by flags.
*
* Considering "move", this is an only case we see a race. To make the race
* small, we check mm->moving_account and detect there are possibility of race
* If there is, we take a lock.
*/
void mem_cgroup_update_page_stat(struct page *page,
enum mem_cgroup_page_stat_item idx, int val)
{
struct mem_cgroup *memcg;
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
struct page_cgroup *pc = lookup_page_cgroup(page);
bool need_unlock = false;
memcg: add lock to synchronize page accounting and migration Introduce a new bit spin lock, PCG_MOVE_LOCK, to synchronize the page accounting and migration code. This reworks the locking scheme of _update_stat() and _move_account() by adding new lock bit PCG_MOVE_LOCK, which is always taken under IRQ disable. 1. If pages are being migrated from a memcg, then updates to that memcg page statistics are protected by grabbing PCG_MOVE_LOCK using move_lock_page_cgroup(). In an upcoming commit, memcg dirty page accounting will be updating memcg page accounting (specifically: num writeback pages) from IRQ context (softirq). Avoid a deadlocking nested spin lock attempt by disabling irq on the local processor when grabbing the PCG_MOVE_LOCK. 2. lock for update_page_stat is used only for avoiding race with move_account(). So, IRQ awareness of lock_page_cgroup() itself is not a problem. The problem is between mem_cgroup_update_page_stat() and mem_cgroup_move_account_page(). Trade-off: * Changing lock_page_cgroup() to always disable IRQ (or local_bh) has some impacts on performance and I think it's bad to disable IRQ when it's not necessary. * adding a new lock makes move_account() slower. Score is here. Performance Impact: moving a 8G anon process. Before: real 0m0.792s user 0m0.000s sys 0m0.780s After: real 0m0.854s user 0m0.000s sys 0m0.842s This score is bad but planned patches for optimization can reduce this impact. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Greg Thelen <gthelen@google.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Andrea Righi <arighi@develer.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:38 +03:00
unsigned long uninitialized_var(flags);
if (mem_cgroup_disabled())
return;
again:
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
rcu_read_lock();
memcg = pc->mem_cgroup;
if (unlikely(!memcg || !PageCgroupUsed(pc)))
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
goto out;
/* pc->mem_cgroup is unstable ? */
if (unlikely(mem_cgroup_stealed(memcg))) {
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
/* take a lock against to access pc->mem_cgroup */
move_lock_mem_cgroup(memcg, &flags);
if (memcg != pc->mem_cgroup || !PageCgroupUsed(pc)) {
move_unlock_mem_cgroup(memcg, &flags);
rcu_read_unlock();
goto again;
}
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
need_unlock = true;
}
switch (idx) {
case MEMCG_NR_FILE_MAPPED:
if (val > 0)
SetPageCgroupFileMapped(pc);
else if (!page_mapped(page))
ClearPageCgroupFileMapped(pc);
idx = MEM_CGROUP_STAT_FILE_MAPPED;
break;
default:
BUG();
}
this_cpu_add(memcg->stat->count[idx], val);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
out:
if (unlikely(need_unlock))
move_unlock_mem_cgroup(memcg, &flags);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
rcu_read_unlock();
}
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
/*
* size of first charge trial. "32" comes from vmscan.c's magic value.
* TODO: maybe necessary to use big numbers in big irons.
*/
#define CHARGE_BATCH 32U
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
struct memcg_stock_pcp {
struct mem_cgroup *cached; /* this never be root cgroup */
unsigned int nr_pages;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
struct work_struct work;
memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-16 02:08:45 +04:00
unsigned long flags;
#define FLUSHING_CACHED_CHARGE (0)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
};
static DEFINE_PER_CPU(struct memcg_stock_pcp, memcg_stock);
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
static DEFINE_MUTEX(percpu_charge_mutex);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
/*
* Try to consume stocked charge on this cpu. If success, one page is consumed
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
* from local stock and true is returned. If the stock is 0 or charges from a
* cgroup which is not current target, returns false. This stock will be
* refilled.
*/
static bool consume_stock(struct mem_cgroup *memcg)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
{
struct memcg_stock_pcp *stock;
bool ret = true;
stock = &get_cpu_var(memcg_stock);
if (memcg == stock->cached && stock->nr_pages)
stock->nr_pages--;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
else /* need to call res_counter_charge */
ret = false;
put_cpu_var(memcg_stock);
return ret;
}
/*
* Returns stocks cached in percpu to res_counter and reset cached information.
*/
static void drain_stock(struct memcg_stock_pcp *stock)
{
struct mem_cgroup *old = stock->cached;
if (stock->nr_pages) {
unsigned long bytes = stock->nr_pages * PAGE_SIZE;
res_counter_uncharge(&old->res, bytes);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
if (do_swap_account)
res_counter_uncharge(&old->memsw, bytes);
stock->nr_pages = 0;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
stock->cached = NULL;
}
/*
* This must be called under preempt disabled or must be called by
* a thread which is pinned to local cpu.
*/
static void drain_local_stock(struct work_struct *dummy)
{
struct memcg_stock_pcp *stock = &__get_cpu_var(memcg_stock);
drain_stock(stock);
memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-16 02:08:45 +04:00
clear_bit(FLUSHING_CACHED_CHARGE, &stock->flags);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
/*
* Cache charges(val) which is from res_counter, to local per_cpu area.
* This will be consumed by consume_stock() function, later.
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
*/
static void refill_stock(struct mem_cgroup *memcg, unsigned int nr_pages)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
{
struct memcg_stock_pcp *stock = &get_cpu_var(memcg_stock);
if (stock->cached != memcg) { /* reset if necessary */
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
drain_stock(stock);
stock->cached = memcg;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
stock->nr_pages += nr_pages;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
put_cpu_var(memcg_stock);
}
/*
* Drains all per-CPU charge caches for given root_memcg resp. subtree
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
* of the hierarchy under it. sync flag says whether we should block
* until the work is done.
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
*/
static void drain_all_stock(struct mem_cgroup *root_memcg, bool sync)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
{
memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-16 02:08:45 +04:00
int cpu, curcpu;
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
/* Notify other cpus that system-wide "drain" is running */
get_online_cpus();
curcpu = get_cpu();
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
struct mem_cgroup *memcg;
memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-16 02:08:45 +04:00
memcg = stock->cached;
if (!memcg || !stock->nr_pages)
memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-16 02:08:45 +04:00
continue;
if (!mem_cgroup_same_or_subtree(root_memcg, memcg))
continue;
if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags)) {
if (cpu == curcpu)
drain_local_stock(&stock->work);
else
schedule_work_on(cpu, &stock->work);
}
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
put_cpu();
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
if (!sync)
goto out;
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
if (test_bit(FLUSHING_CACHED_CHARGE, &stock->flags))
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
flush_work(&stock->work);
}
out:
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
put_online_cpus();
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
}
/*
* Tries to drain stocked charges in other cpus. This function is asynchronous
* and just put a work per cpu for draining localy on each cpu. Caller can
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
static void drain_all_stock_async(struct mem_cgroup *root_memcg)
memcg: unify sync and async per-cpu charge cache draining Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:28 +04:00
{
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
/*
* If someone calls draining, avoid adding more kworker runs.
*/
if (!mutex_trylock(&percpu_charge_mutex))
return;
drain_all_stock(root_memcg, false);
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
mutex_unlock(&percpu_charge_mutex);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
/* This is a synchronous drain interface. */
static void drain_all_stock_sync(struct mem_cgroup *root_memcg)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
{
/* called when force_empty is called */
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
mutex_lock(&percpu_charge_mutex);
drain_all_stock(root_memcg, true);
Revert "memcg: get rid of percpu_charge_mutex lock" This reverts commit 8521fc50d433507a7cdc96bec280f9e5888a54cc. The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE bit operations is sufficient but that is not true. Johannes Weiner has reported a crash during parallel memory cgroup removal: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70 Oops: 0000 [#1] PREEMPT SMP Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3 RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70 RSP: 0018:ffff880077b09c88 EFLAGS: 00010202 Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310) Call Trace: [<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40 [<ffffffff810feccf>] drain_all_stock+0x11f/0x170 [<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0 [<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20 [<ffffffff81080559>] cgroup_rmdir+0xb9/0x500 [<ffffffff81114d26>] vfs_rmdir+0x86/0xe0 [<ffffffff81114e7b>] do_rmdir+0xfb/0x110 [<ffffffff81114ea6>] sys_rmdir+0x16/0x20 [<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b We are crashing because we try to dereference cached memcg when we are checking whether we should wait for draining on the cache. The cache is already cleaned up, though. There is also a theoretical chance that the cached memcg gets freed between we test for the FLUSHING_CACHED_CHARGE and dereference it in mem_cgroup_same_or_subtree: CPU0 CPU1 CPU2 mem=stock->cached stock->cached=NULL clear_bit test_and_set_bit test_bit() ... <preempted> mem_cgroup_destroy use after free The percpu_charge_mutex protected from this race because sync draining is exclusive. It is safer to revert now and come up with a more parallel implementation later. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 13:56:26 +04:00
mutex_unlock(&percpu_charge_mutex);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
/*
* This function drains percpu counter value from DEAD cpu and
* move it to local cpu. Note that this function can be preempted.
*/
static void mem_cgroup_drain_pcp_counter(struct mem_cgroup *memcg, int cpu)
{
int i;
spin_lock(&memcg->pcp_counter_lock);
for (i = 0; i < MEM_CGROUP_STAT_DATA; i++) {
long x = per_cpu(memcg->stat->count[i], cpu);
per_cpu(memcg->stat->count[i], cpu) = 0;
memcg->nocpu_base.count[i] += x;
}
for (i = 0; i < MEM_CGROUP_EVENTS_NSTATS; i++) {
unsigned long x = per_cpu(memcg->stat->events[i], cpu);
per_cpu(memcg->stat->events[i], cpu) = 0;
memcg->nocpu_base.events[i] += x;
}
spin_unlock(&memcg->pcp_counter_lock);
}
static int __cpuinit memcg_cpu_hotplug_callback(struct notifier_block *nb,
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
unsigned long action,
void *hcpu)
{
int cpu = (unsigned long)hcpu;
struct memcg_stock_pcp *stock;
struct mem_cgroup *iter;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
if (action == CPU_ONLINE)
return NOTIFY_OK;
if ((action != CPU_DEAD) || action != CPU_DEAD_FROZEN)
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
return NOTIFY_OK;
mm: memcg: consolidate hierarchy iteration primitives The memcg naturalization series: Memory control groups are currently bolted onto the side of traditional memory management in places where better integration would be preferrable. To reclaim memory, for example, memory control groups maintain their own LRU list and reclaim strategy aside from the global per-zone LRU list reclaim. But an extra list head for each existing page frame is expensive and maintaining it requires additional code. This patchset disables the global per-zone LRU lists on memory cgroup configurations and converts all its users to operate on the per-memory cgroup lists instead. As LRU pages are then exclusively on one list, this saves two list pointers for each page frame in the system: page_cgroup array size with 4G physical memory vanilla: allocated 31457280 bytes of page_cgroup patched: allocated 15728640 bytes of page_cgroup At the same time, system performance for various workloads is unaffected: 100G sparse file cat, 4G physical memory, 10 runs, to test for code bloat in the traditional LRU handling and kswapd & direct reclaim paths, without/with the memory controller configured in vanilla: 71.603(0.207) seconds patched: 71.640(0.156) seconds vanilla: 79.558(0.288) seconds patched: 77.233(0.147) seconds 100G sparse file cat in 1G memory cgroup, 10 runs, to test for code bloat in the traditional memory cgroup LRU handling and reclaim path vanilla: 96.844(0.281) seconds patched: 94.454(0.311) seconds 4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M swap on SSD, 10 runs, to test for regressions in kswapd & direct reclaim using per-memcg LRU lists with multiple memcgs and multiple allocators within each memcg vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ] patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ] 16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M swap on SSD, 10 runs, to test for regressions in hierarchical memcg setups vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ] patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ] This patch: There are currently two different implementations of iterating over a memory cgroup hierarchy tree. Consolidate them into one worker function and base the convenience looping-macros on top of it. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:48 +04:00
for_each_mem_cgroup(iter)
mem_cgroup_drain_pcp_counter(iter, cpu);
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
stock = &per_cpu(memcg_stock, cpu);
drain_stock(stock);
return NOTIFY_OK;
}
/* See __mem_cgroup_try_charge() for details */
enum {
CHARGE_OK, /* success */
CHARGE_RETRY, /* need to retry but retry is not bad */
CHARGE_NOMEM, /* we can't do more. return -ENOMEM */
CHARGE_WOULDBLOCK, /* GFP_WAIT wasn't set and no enough res. */
CHARGE_OOM_DIE, /* the current is killed because of OOM */
};
static int mem_cgroup_do_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages, bool oom_check)
{
unsigned long csize = nr_pages * PAGE_SIZE;
struct mem_cgroup *mem_over_limit;
struct res_counter *fail_res;
unsigned long flags = 0;
int ret;
ret = res_counter_charge(&memcg->res, csize, &fail_res);
if (likely(!ret)) {
if (!do_swap_account)
return CHARGE_OK;
ret = res_counter_charge(&memcg->memsw, csize, &fail_res);
if (likely(!ret))
return CHARGE_OK;
res_counter_uncharge(&memcg->res, csize);
mem_over_limit = mem_cgroup_from_res_counter(fail_res, memsw);
flags |= MEM_CGROUP_RECLAIM_NOSWAP;
} else
mem_over_limit = mem_cgroup_from_res_counter(fail_res, res);
/*
* nr_pages can be either a huge page (HPAGE_PMD_NR), a batch
* of regular pages (CHARGE_BATCH), or a single regular page (1).
*
* Never reclaim on behalf of optional batching, retry with a
* single page instead.
*/
if (nr_pages == CHARGE_BATCH)
return CHARGE_RETRY;
if (!(gfp_mask & __GFP_WAIT))
return CHARGE_WOULDBLOCK;
ret = mem_cgroup_reclaim(mem_over_limit, gfp_mask, flags);
if (mem_cgroup_margin(mem_over_limit) >= nr_pages)
return CHARGE_RETRY;
/*
* Even though the limit is exceeded at this point, reclaim
* may have been able to free some pages. Retry the charge
* before killing the task.
*
* Only for regular pages, though: huge pages are rather
* unlikely to succeed so close to the limit, and we fall back
* to regular pages anyway in case of failure.
*/
if (nr_pages == 1 && ret)
return CHARGE_RETRY;
/*
* At task move, charge accounts can be doubly counted. So, it's
* better to wait until the end of task_move if something is going on.
*/
if (mem_cgroup_wait_acct_move(mem_over_limit))
return CHARGE_RETRY;
/* If we don't need to call oom-killer at el, return immediately */
if (!oom_check)
return CHARGE_NOMEM;
/* check OOM */
if (!mem_cgroup_handle_oom(mem_over_limit, gfp_mask, get_order(csize)))
return CHARGE_OOM_DIE;
return CHARGE_RETRY;
}
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/*
* __mem_cgroup_try_charge() does
* 1. detect memcg to be charged against from passed *mm and *ptr,
* 2. update res_counter
* 3. call memory reclaim if necessary.
*
* In some special case, if the task is fatal, fatal_signal_pending() or
* has TIF_MEMDIE, this function returns -EINTR while writing root_mem_cgroup
* to *ptr. There are two reasons for this. 1: fatal threads should quit as soon
* as possible without any hazards. 2: all pages should have a valid
* pc->mem_cgroup. If mm is NULL and the caller doesn't pass a valid memcg
* pointer, that is treated as a charge to root_mem_cgroup.
*
* So __mem_cgroup_try_charge() will return
* 0 ... on success, filling *ptr with a valid memcg pointer.
* -ENOMEM ... charge failure because of resource limits.
* -EINTR ... if thread is fatal. *ptr is filled with root_mem_cgroup.
*
* Unlike the exported interface, an "oom" parameter is added. if oom==true,
* the oom-killer can be invoked.
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
*/
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
static int __mem_cgroup_try_charge(struct mm_struct *mm,
gfp_t gfp_mask,
unsigned int nr_pages,
struct mem_cgroup **ptr,
bool oom)
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
{
unsigned int batch = max(CHARGE_BATCH, nr_pages);
int nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
struct mem_cgroup *memcg = NULL;
int ret;
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
/*
* Unlike gloval-vm's OOM-kill, we're not in memory shortage
* in system level. So, allow to go ahead dying process in addition to
* MEMDIE process.
*/
if (unlikely(test_thread_flag(TIF_MEMDIE)
|| fatal_signal_pending(current)))
goto bypass;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
/*
* We always charge the cgroup the mm_struct belongs to.
* The mm_struct's mem_cgroup changes on task migration if the
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
* thread group leader migrates. It's possible that mm is not
* set, if so charge the init_mm (happens for pagecache usage).
*/
if (!*ptr && !mm)
*ptr = root_mem_cgroup;
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
again:
if (*ptr) { /* css should be a valid one */
memcg = *ptr;
VM_BUG_ON(css_is_removed(&memcg->css));
if (mem_cgroup_is_root(memcg))
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
goto done;
if (nr_pages == 1 && consume_stock(memcg))
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
goto done;
css_get(&memcg->css);
} else {
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
struct task_struct *p;
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
rcu_read_lock();
p = rcu_dereference(mm->owner);
/*
* Because we don't have task_lock(), "p" can exit.
* In that case, "memcg" can point to root or p can be NULL with
* race with swapoff. Then, we have small risk of mis-accouning.
* But such kind of mis-account by race always happens because
* we don't have cgroup_mutex(). It's overkill and we allo that
* small race, here.
* (*) swapoff at el will charge against mm-struct not against
* task-struct. So, mm->owner can be NULL.
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
*/
memcg = mem_cgroup_from_task(p);
if (!memcg)
memcg = root_mem_cgroup;
if (mem_cgroup_is_root(memcg)) {
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
rcu_read_unlock();
goto done;
}
if (nr_pages == 1 && consume_stock(memcg)) {
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
/*
* It seems dagerous to access memcg without css_get().
* But considering how consume_stok works, it's not
* necessary. If consume_stock success, some charges
* from this memcg are cached on this cpu. So, we
* don't need to call css_get()/css_tryget() before
* calling consume_stock().
*/
rcu_read_unlock();
goto done;
}
/* after here, we may be blocked. we need to get refcnt */
if (!css_tryget(&memcg->css)) {
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
rcu_read_unlock();
goto again;
}
rcu_read_unlock();
}
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
do {
bool oom_check;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
/* If killed, bypass charge */
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
if (fatal_signal_pending(current)) {
css_put(&memcg->css);
goto bypass;
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
}
oom_check = false;
if (oom && !nr_oom_retries) {
oom_check = true;
nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
}
ret = mem_cgroup_do_charge(memcg, gfp_mask, batch, oom_check);
switch (ret) {
case CHARGE_OK:
break;
case CHARGE_RETRY: /* not in OOM situation but retry */
batch = nr_pages;
css_put(&memcg->css);
memcg = NULL;
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
goto again;
case CHARGE_WOULDBLOCK: /* !__GFP_WAIT */
css_put(&memcg->css);
goto nomem;
case CHARGE_NOMEM: /* OOM routine works */
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
if (!oom) {
css_put(&memcg->css);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
goto nomem;
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
}
/* If oom, we never return -ENOMEM */
nr_oom_retries--;
break;
case CHARGE_OOM_DIE: /* Killed by OOM Killer */
css_put(&memcg->css);
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
goto bypass;
}
} while (ret != CHARGE_OK);
if (batch > nr_pages)
refill_stock(memcg, batch - nr_pages);
css_put(&memcg->css);
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
done:
*ptr = memcg;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return 0;
nomem:
*ptr = NULL;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return -ENOMEM;
memcg: fix oom kill behavior In current page-fault code, handle_mm_fault() -> ... -> mem_cgroup_charge() -> map page or handle error. -> check return code. If page fault's return code is VM_FAULT_OOM, page_fault_out_of_memory() is called. But if it's caused by memcg, OOM should have been already invoked. Then, I added a patch: a636b327f731143ccc544b966cfd8de6cb6d72c6. That patch records last_oom_jiffies for memcg's sub-hierarchy and prevents page_fault_out_of_memory from being invoked in near future. But Nishimura-san reported that check by jiffies is not enough when the system is terribly heavy. This patch changes memcg's oom logic as. * If memcg causes OOM-kill, continue to retry. * remove jiffies check which is used now. * add memcg-oom-lock which works like perzone oom lock. * If current is killed(as a process), bypass charge. Something more sophisticated can be added but this pactch does fundamental things. TODO: - add oom notifier - add permemcg disable-oom-kill flag and freezer at oom. - more chances for wake up oom waiter (when changing memory limit etc..) Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:39 +03:00
bypass:
*ptr = root_mem_cgroup;
return -EINTR;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
}
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
/*
* Somemtimes we have to undo a charge we got by try_charge().
* This function is for that and do uncharge, put css's refcnt.
* gotten by try_charge().
*/
static void __mem_cgroup_cancel_charge(struct mem_cgroup *memcg,
unsigned int nr_pages)
{
if (!mem_cgroup_is_root(memcg)) {
unsigned long bytes = nr_pages * PAGE_SIZE;
res_counter_uncharge(&memcg->res, bytes);
if (do_swap_account)
res_counter_uncharge(&memcg->memsw, bytes);
}
}
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
/*
* A helper function to get mem_cgroup from ID. must be called under
* rcu_read_lock(). The caller must check css_is_removed() or some if
* it's concern. (dropping refcnt from swap can be called against removed
* memcg.)
*/
static struct mem_cgroup *mem_cgroup_lookup(unsigned short id)
{
struct cgroup_subsys_state *css;
/* ID 0 is unused ID */
if (!id)
return NULL;
css = css_lookup(&mem_cgroup_subsys, id);
if (!css)
return NULL;
return container_of(css, struct mem_cgroup, css);
}
struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page)
{
struct mem_cgroup *memcg = NULL;
memcg: charge swapcache to proper memcg memcg_test.txt says at 4.1: This swap-in is one of the most complicated work. In do_swap_page(), following events occur when pte is unchanged. (1) the page (SwapCache) is looked up. (2) lock_page() (3) try_charge_swapin() (4) reuse_swap_page() (may call delete_swap_cache()) (5) commit_charge_swapin() (6) swap_free(). Considering following situation for example. (A) The page has not been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (B) The page has not been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). (C) The page has been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (D) The page has been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). memory.usage/memsw.usage changes to this page/swp_entry will be Case (A) (B) (C) (D) Event Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 =========================================== (3) +1/+1 +1/+1 +1/+1 +1/+1 (4) - 0/ 0 - -1/ 0 (5) 0/-1 0/ 0 -1/-1 0/ 0 (6) - 0/-1 - 0/-1 =========================================== Result 1/ 1 1/ 1 1/ 1 1/ 1 In any cases, charges to this page should be 1/ 1. In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL (because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means charges to the memcg("foo") to which the "current" belongs. OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa") to which the page has been charged. So, if the "foo" and "baa" is different(for example because of task move), this charge will be moved from "baa" to "foo". I think this is an unexpected behavior. This patch fixes this by modifying mem_cgroup_try_get_from_swapcache() to return the memcg to which the swapcache has been charged if PCG_USED bit is set. IIUC, checking PCG_USED bit of swapcache is safe under page lock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:43 +04:00
struct page_cgroup *pc;
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
unsigned short id;
swp_entry_t ent;
memcg: charge swapcache to proper memcg memcg_test.txt says at 4.1: This swap-in is one of the most complicated work. In do_swap_page(), following events occur when pte is unchanged. (1) the page (SwapCache) is looked up. (2) lock_page() (3) try_charge_swapin() (4) reuse_swap_page() (may call delete_swap_cache()) (5) commit_charge_swapin() (6) swap_free(). Considering following situation for example. (A) The page has not been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (B) The page has not been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). (C) The page has been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (D) The page has been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). memory.usage/memsw.usage changes to this page/swp_entry will be Case (A) (B) (C) (D) Event Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 =========================================== (3) +1/+1 +1/+1 +1/+1 +1/+1 (4) - 0/ 0 - -1/ 0 (5) 0/-1 0/ 0 -1/-1 0/ 0 (6) - 0/-1 - 0/-1 =========================================== Result 1/ 1 1/ 1 1/ 1 1/ 1 In any cases, charges to this page should be 1/ 1. In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL (because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means charges to the memcg("foo") to which the "current" belongs. OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa") to which the page has been charged. So, if the "foo" and "baa" is different(for example because of task move), this charge will be moved from "baa" to "foo". I think this is an unexpected behavior. This patch fixes this by modifying mem_cgroup_try_get_from_swapcache() to return the memcg to which the swapcache has been charged if PCG_USED bit is set. IIUC, checking PCG_USED bit of swapcache is safe under page lock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:43 +04:00
VM_BUG_ON(!PageLocked(page));
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
if (PageCgroupUsed(pc)) {
memcg = pc->mem_cgroup;
if (memcg && !css_tryget(&memcg->css))
memcg = NULL;
} else if (PageSwapCache(page)) {
memcg: charge swapcache to proper memcg memcg_test.txt says at 4.1: This swap-in is one of the most complicated work. In do_swap_page(), following events occur when pte is unchanged. (1) the page (SwapCache) is looked up. (2) lock_page() (3) try_charge_swapin() (4) reuse_swap_page() (may call delete_swap_cache()) (5) commit_charge_swapin() (6) swap_free(). Considering following situation for example. (A) The page has not been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (B) The page has not been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). (C) The page has been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (D) The page has been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). memory.usage/memsw.usage changes to this page/swp_entry will be Case (A) (B) (C) (D) Event Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 =========================================== (3) +1/+1 +1/+1 +1/+1 +1/+1 (4) - 0/ 0 - -1/ 0 (5) 0/-1 0/ 0 -1/-1 0/ 0 (6) - 0/-1 - 0/-1 =========================================== Result 1/ 1 1/ 1 1/ 1 1/ 1 In any cases, charges to this page should be 1/ 1. In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL (because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means charges to the memcg("foo") to which the "current" belongs. OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa") to which the page has been charged. So, if the "foo" and "baa" is different(for example because of task move), this charge will be moved from "baa" to "foo". I think this is an unexpected behavior. This patch fixes this by modifying mem_cgroup_try_get_from_swapcache() to return the memcg to which the swapcache has been charged if PCG_USED bit is set. IIUC, checking PCG_USED bit of swapcache is safe under page lock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:43 +04:00
ent.val = page_private(page);
id = lookup_swap_cgroup_id(ent);
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
rcu_read_lock();
memcg = mem_cgroup_lookup(id);
if (memcg && !css_tryget(&memcg->css))
memcg = NULL;
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
rcu_read_unlock();
memcg: charge swapcache to proper memcg memcg_test.txt says at 4.1: This swap-in is one of the most complicated work. In do_swap_page(), following events occur when pte is unchanged. (1) the page (SwapCache) is looked up. (2) lock_page() (3) try_charge_swapin() (4) reuse_swap_page() (may call delete_swap_cache()) (5) commit_charge_swapin() (6) swap_free(). Considering following situation for example. (A) The page has not been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (B) The page has not been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). (C) The page has been charged before (2) and reuse_swap_page() doesn't call delete_from_swap_cache(). (D) The page has been charged before (2) and reuse_swap_page() calls delete_from_swap_cache(). memory.usage/memsw.usage changes to this page/swp_entry will be Case (A) (B) (C) (D) Event Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 =========================================== (3) +1/+1 +1/+1 +1/+1 +1/+1 (4) - 0/ 0 - -1/ 0 (5) 0/-1 0/ 0 -1/-1 0/ 0 (6) - 0/-1 - 0/-1 =========================================== Result 1/ 1 1/ 1 1/ 1 1/ 1 In any cases, charges to this page should be 1/ 1. In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL (because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means charges to the memcg("foo") to which the "current" belongs. OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa") to which the page has been charged. So, if the "foo" and "baa" is different(for example because of task move), this charge will be moved from "baa" to "foo". I think this is an unexpected behavior. This patch fixes this by modifying mem_cgroup_try_get_from_swapcache() to return the memcg to which the swapcache has been charged if PCG_USED bit is set. IIUC, checking PCG_USED bit of swapcache is safe under page lock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:43 +04:00
}
unlock_page_cgroup(pc);
return memcg;
}
static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg,
struct page *page,
unsigned int nr_pages,
struct page_cgroup *pc,
enum charge_type ctype,
bool lrucare)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
{
struct zone *uninitialized_var(zone);
bool was_on_lru = false;
bool anon;
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
__mem_cgroup_cancel_charge(memcg, nr_pages);
return;
}
/*
* we don't need page_cgroup_lock about tail pages, becase they are not
* accessed by any other context at this point.
*/
/*
* In some cases, SwapCache and FUSE(splice_buf->radixtree), the page
* may already be on some other mem_cgroup's LRU. Take care of it.
*/
if (lrucare) {
zone = page_zone(page);
spin_lock_irq(&zone->lru_lock);
if (PageLRU(page)) {
ClearPageLRU(page);
del_page_from_lru_list(zone, page, page_lru(page));
was_on_lru = true;
}
}
pc->mem_cgroup = memcg;
/*
* We access a page_cgroup asynchronously without lock_page_cgroup().
* Especially when a page_cgroup is taken from a page, pc->mem_cgroup
* is accessed after testing USED bit. To make pc->mem_cgroup visible
* before USED bit, we need memory barrier here.
* See mem_cgroup_add_lru_list(), etc.
*/
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
smp_wmb();
SetPageCgroupUsed(pc);
if (lrucare) {
if (was_on_lru) {
VM_BUG_ON(PageLRU(page));
SetPageLRU(page);
add_page_to_lru_list(zone, page, page_lru(page));
}
spin_unlock_irq(&zone->lru_lock);
}
if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
anon = true;
else
anon = false;
mem_cgroup_charge_statistics(memcg, anon, nr_pages);
unlock_page_cgroup(pc);
/*
* "charge_statistics" updated event counter. Then, check it.
* Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
* if they exceeds softlimit.
*/
memcg_check_events(memcg, page);
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define PCGF_NOCOPY_AT_SPLIT ((1 << PCG_LOCK) | (1 << PCG_MIGRATION))
/*
* Because tail pages are not marked as "used", set it. We're under
* zone->lru_lock, 'splitting on pmd' and compound_lock.
* charge/uncharge will be never happen and move_account() is done under
* compound_lock(), so we don't have to take care of races.
*/
void mem_cgroup_split_huge_fixup(struct page *head)
{
struct page_cgroup *head_pc = lookup_page_cgroup(head);
struct page_cgroup *pc;
int i;
if (mem_cgroup_disabled())
return;
for (i = 1; i < HPAGE_PMD_NR; i++) {
pc = head_pc + i;
pc->mem_cgroup = head_pc->mem_cgroup;
smp_wmb();/* see __commit_charge() */
pc->flags = head_pc->flags & ~PCGF_NOCOPY_AT_SPLIT;
}
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/**
* mem_cgroup_move_account - move account of the page
* @page: the page
* @nr_pages: number of regular pages (>1 for huge pages)
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
* @pc: page_cgroup of the page.
* @from: mem_cgroup which the page is moved from.
* @to: mem_cgroup which the page is moved to. @from != @to.
* @uncharge: whether we should call uncharge and css_put against @from.
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
*
* The caller must confirm following.
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
* - page is not on LRU (isolate_page() is useful.)
* - compound_lock is held when nr_pages > 1
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
*
* This function doesn't do "charge" nor css_get to new cgroup. It should be
* done by a caller(__mem_cgroup_try_charge would be useful). If @uncharge is
* true, this function does "uncharge" from old cgroup, but it doesn't if
* @uncharge is false, so a caller should do "uncharge".
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
*/
static int mem_cgroup_move_account(struct page *page,
unsigned int nr_pages,
struct page_cgroup *pc,
struct mem_cgroup *from,
struct mem_cgroup *to,
bool uncharge)
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
{
unsigned long flags;
int ret;
bool anon = PageAnon(page);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
VM_BUG_ON(from == to);
VM_BUG_ON(PageLRU(page));
/*
* The page is isolated from LRU. So, collapse function
* will not handle this page. But page splitting can happen.
* Do this check under compound_page_lock(). The caller should
* hold it.
*/
ret = -EBUSY;
if (nr_pages > 1 && !PageTransHuge(page))
goto out;
lock_page_cgroup(pc);
ret = -EINVAL;
if (!PageCgroupUsed(pc) || pc->mem_cgroup != from)
goto unlock;
move_lock_mem_cgroup(from, &flags);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (PageCgroupFileMapped(pc)) {
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
/* Update mapped_file data for mem_cgroup */
preempt_disable();
__this_cpu_dec(from->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
__this_cpu_inc(to->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
preempt_enable();
}
mem_cgroup_charge_statistics(from, anon, -nr_pages);
if (uncharge)
/* This is not "cancel", but cancel_charge does all we need. */
__mem_cgroup_cancel_charge(from, nr_pages);
/* caller should have done css_get */
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
pc->mem_cgroup = to;
mem_cgroup_charge_statistics(to, anon, nr_pages);
/*
* We charges against "to" which may not have any tasks. Then, "to"
* can be under rmdir(). But in current implementation, caller of
* this function is just force_empty() and move charge, so it's
* guaranteed that "to" is never removed. So, we don't check rmdir
* status here.
*/
move_unlock_mem_cgroup(from, &flags);
ret = 0;
unlock:
unlock_page_cgroup(pc);
/*
* check events
*/
memcg_check_events(to, page);
memcg_check_events(from, page);
out:
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
return ret;
}
/*
* move charges to its parent.
*/
static int mem_cgroup_move_parent(struct page *page,
struct page_cgroup *pc,
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
struct mem_cgroup *child,
gfp_t gfp_mask)
{
struct cgroup *cg = child->css.cgroup;
struct cgroup *pcg = cg->parent;
struct mem_cgroup *parent;
unsigned int nr_pages;
unsigned long uninitialized_var(flags);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
int ret;
/* Is ROOT ? */
if (!pcg)
return -EINVAL;
ret = -EBUSY;
if (!get_page_unless_zero(page))
goto out;
if (isolate_lru_page(page))
goto put;
nr_pages = hpage_nr_pages(page);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
parent = mem_cgroup_from_cont(pcg);
ret = __mem_cgroup_try_charge(NULL, gfp_mask, nr_pages, &parent, false);
if (ret)
goto put_back;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (nr_pages > 1)
flags = compound_lock_irqsave(page);
ret = mem_cgroup_move_account(page, nr_pages, pc, child, parent, true);
if (ret)
__mem_cgroup_cancel_charge(parent, nr_pages);
if (nr_pages > 1)
compound_unlock_irqrestore(page, flags);
put_back:
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
putback_lru_page(page);
put:
put_page(page);
out:
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
return ret;
}
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
/*
* Charge the memory controller for page usage.
* Return
* 0 if the charge was successful
* < 0 if the cgroup is over its limit
*/
static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask, enum charge_type ctype)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
{
struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
struct page_cgroup *pc;
bool oom = true;
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
int ret;
if (PageTransHuge(page)) {
nr_pages <<= compound_order(page);
VM_BUG_ON(!PageTransHuge(page));
/*
* Never OOM-kill a process for a huge page. The
* fault handler will fall back to regular pages.
*/
oom = false;
}
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
pc = lookup_page_cgroup(page);
ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom);
if (ret == -ENOMEM)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return ret;
__mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false);
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
return 0;
}
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
int mem_cgroup_newpage_charge(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
if (mem_cgroup_disabled())
return 0;
VM_BUG_ON(page_mapped(page));
VM_BUG_ON(page->mapping && !PageAnon(page));
VM_BUG_ON(!mm);
return mem_cgroup_charge_common(page, mm, gfp_mask,
MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
static void
__mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
enum charge_type ctype);
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
struct mem_cgroup *memcg = NULL;
enum charge_type type = MEM_CGROUP_CHARGE_TYPE_CACHE;
int ret;
if (mem_cgroup_disabled())
return 0;
if (PageCompound(page))
return 0;
if (unlikely(!mm))
mm = &init_mm;
if (!page_is_file_cache(page))
type = MEM_CGROUP_CHARGE_TYPE_SHMEM;
if (!PageSwapCache(page))
ret = mem_cgroup_charge_common(page, mm, gfp_mask, type);
else { /* page is swapcache/shmem */
ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &memcg);
if (!ret)
__mem_cgroup_commit_charge_swapin(page, memcg, type);
}
return ret;
}
/*
* While swap-in, try_charge -> commit or cancel, the page is locked.
* And when try_charge() successfully returns, one refcnt to memcg without
* struct page_cgroup is acquired. This refcnt will be consumed by
* "commit()" or removed by "cancel()"
*/
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
struct page *page,
gfp_t mask, struct mem_cgroup **memcgp)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
{
struct mem_cgroup *memcg;
int ret;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
*memcgp = NULL;
if (mem_cgroup_disabled())
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return 0;
if (!do_swap_account)
goto charge_cur_mm;
/*
* A racing thread's fault, or swapoff, may have already updated
* the pte, and even removed page from swap cache: in those cases
* do_swap_page()'s pte_same() test will fail; but there's also a
* KSM case which does need to charge the page.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
*/
if (!PageSwapCache(page))
goto charge_cur_mm;
memcg = try_get_mem_cgroup_from_page(page);
if (!memcg)
goto charge_cur_mm;
*memcgp = memcg;
ret = __mem_cgroup_try_charge(NULL, mask, 1, memcgp, true);
css_put(&memcg->css);
if (ret == -EINTR)
ret = 0;
return ret;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
charge_cur_mm:
if (unlikely(!mm))
mm = &init_mm;
ret = __mem_cgroup_try_charge(mm, mask, 1, memcgp, true);
if (ret == -EINTR)
ret = 0;
return ret;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
static void
__mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg,
enum charge_type ctype)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
{
struct page_cgroup *pc;
if (mem_cgroup_disabled())
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return;
if (!memcg)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return;
cgroup_exclude_rmdir(&memcg->css);
pc = lookup_page_cgroup(page);
__mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/*
* Now swap is on-memory. This means this page may be
* counted both as mem and swap....double count.
memcg: fix swap accounting leak Fix swapin charge operation of memcg. Now, memcg has hooks to swap-out operation and checks SwapCache is really unused or not. That check depends on contents of struct page. I.e. If PageAnon(page) && page_mapped(page), the page is recoginized as still-in-use. Now, reuse_swap_page() calles delete_from_swap_cache() before establishment of any rmap. Then, in followinig sequence (Page fault with WRITE) try_charge() (charge += PAGESIZE) commit_charge() (Check page_cgroup is used or not..) reuse_swap_page() -> delete_from_swapcache() -> mem_cgroup_uncharge_swapcache() (charge -= PAGESIZE) ...... New charge is uncharged soon.... To avoid this, move commit_charge() after page_mapcount() goes up to 1. By this, try_charge() (usage += PAGESIZE) reuse_swap_page() (may usage -= PAGESIZE if PCG_USED is set) commit_charge() (If page_cgroup is not marked as PCG_USED, add new charge.) Accounting will be correct. Changelog (v2) -> (v3) - fixed invalid charge to swp_entry==0. - updated documentation. Changelog (v1) -> (v2) - fixed comment. [nishimura@mxp.nes.nec.co.jp: swap accounting leak doc fix] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:31 +03:00
* Fix it by uncharging from memsw. Basically, this SwapCache is stable
* under lock_page(). But in do_swap_page()::memory.c, reuse_swap_page()
* may call delete_from_swap_cache() before reach here.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
*/
memcg: fix swap accounting leak Fix swapin charge operation of memcg. Now, memcg has hooks to swap-out operation and checks SwapCache is really unused or not. That check depends on contents of struct page. I.e. If PageAnon(page) && page_mapped(page), the page is recoginized as still-in-use. Now, reuse_swap_page() calles delete_from_swap_cache() before establishment of any rmap. Then, in followinig sequence (Page fault with WRITE) try_charge() (charge += PAGESIZE) commit_charge() (Check page_cgroup is used or not..) reuse_swap_page() -> delete_from_swapcache() -> mem_cgroup_uncharge_swapcache() (charge -= PAGESIZE) ...... New charge is uncharged soon.... To avoid this, move commit_charge() after page_mapcount() goes up to 1. By this, try_charge() (usage += PAGESIZE) reuse_swap_page() (may usage -= PAGESIZE if PCG_USED is set) commit_charge() (If page_cgroup is not marked as PCG_USED, add new charge.) Accounting will be correct. Changelog (v2) -> (v3) - fixed invalid charge to swp_entry==0. - updated documentation. Changelog (v1) -> (v2) - fixed comment. [nishimura@mxp.nes.nec.co.jp: swap accounting leak doc fix] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:31 +03:00
if (do_swap_account && PageSwapCache(page)) {
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
swp_entry_t ent = {.val = page_private(page)};
struct mem_cgroup *swap_memcg;
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
unsigned short id;
id = swap_cgroup_record(ent, 0);
rcu_read_lock();
swap_memcg = mem_cgroup_lookup(id);
if (swap_memcg) {
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
/*
* This recorded memcg can be obsolete one. So, avoid
* calling css_tryget
*/
if (!mem_cgroup_is_root(swap_memcg))
res_counter_uncharge(&swap_memcg->memsw,
PAGE_SIZE);
mem_cgroup_swap_statistics(swap_memcg, false);
mem_cgroup_put(swap_memcg);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
rcu_read_unlock();
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
/*
* At swapin, we may charge account against cgroup which has no tasks.
* So, rmdir()->pre_destroy() can be called while we do this charge.
* In that case, we need to call pre_destroy() again. check it here.
*/
cgroup_release_and_wakeup_rmdir(&memcg->css);
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
}
void mem_cgroup_commit_charge_swapin(struct page *page,
struct mem_cgroup *memcg)
{
__mem_cgroup_commit_charge_swapin(page, memcg,
MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
{
if (mem_cgroup_disabled())
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return;
if (!memcg)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
return;
__mem_cgroup_cancel_charge(memcg, 1);
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
}
static void mem_cgroup_do_uncharge(struct mem_cgroup *memcg,
unsigned int nr_pages,
const enum charge_type ctype)
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
{
struct memcg_batch_info *batch = NULL;
bool uncharge_memsw = true;
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
/* If swapout, usage of swap doesn't decrease */
if (!do_swap_account || ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
uncharge_memsw = false;
batch = &current->memcg_batch;
/*
* In usual, we do css_get() when we remember memcg pointer.
* But in this case, we keep res->usage until end of a series of
* uncharges. Then, it's ok to ignore memcg's refcnt.
*/
if (!batch->memcg)
batch->memcg = memcg;
/*
* do_batch > 0 when unmapping pages or inode invalidate/truncate.
* In those cases, all pages freed continuously can be expected to be in
* the same cgroup and we have chance to coalesce uncharges.
* But we do uncharge one by one if this is killed by OOM(TIF_MEMDIE)
* because we want to do uncharge as soon as possible.
*/
if (!batch->do_batch || test_thread_flag(TIF_MEMDIE))
goto direct_uncharge;
if (nr_pages > 1)
goto direct_uncharge;
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
/*
* In typical case, batch->memcg == mem. This means we can
* merge a series of uncharges to an uncharge of res_counter.
* If not, we uncharge res_counter ony by one.
*/
if (batch->memcg != memcg)
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
goto direct_uncharge;
/* remember freed charge and uncharge it later */
batch->nr_pages++;
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
if (uncharge_memsw)
batch->memsw_nr_pages++;
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
return;
direct_uncharge:
res_counter_uncharge(&memcg->res, nr_pages * PAGE_SIZE);
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
if (uncharge_memsw)
res_counter_uncharge(&memcg->memsw, nr_pages * PAGE_SIZE);
if (unlikely(batch->memcg != memcg))
memcg_oom_recover(memcg);
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
}
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:48 +03:00
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
/*
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
* uncharge if !page_mapped(page)
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
*/
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
static struct mem_cgroup *
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
__mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
{
struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
struct page_cgroup *pc;
bool anon;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:13:53 +03:00
if (mem_cgroup_disabled())
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return NULL;
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
if (PageSwapCache(page))
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return NULL;
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
if (PageTransHuge(page)) {
nr_pages <<= compound_order(page);
VM_BUG_ON(!PageTransHuge(page));
}
/*
* Check if our page_cgroup is valid
*/
pc = lookup_page_cgroup(page);
if (unlikely(!PageCgroupUsed(pc)))
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return NULL;
lock_page_cgroup(pc);
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
memcg = pc->mem_cgroup;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
if (!PageCgroupUsed(pc))
goto unlock_out;
anon = PageAnon(page);
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
switch (ctype) {
case MEM_CGROUP_CHARGE_TYPE_MAPPED:
anon = true;
/* fallthrough */
case MEM_CGROUP_CHARGE_TYPE_DROP:
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/* See mem_cgroup_prepare_migration() */
if (page_mapped(page) || PageCgroupMigration(pc))
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
goto unlock_out;
break;
case MEM_CGROUP_CHARGE_TYPE_SWAPOUT:
if (!PageAnon(page)) { /* Shared memory */
if (page->mapping && !page_is_file_cache(page))
goto unlock_out;
} else if (page_mapped(page)) /* Anon */
goto unlock_out;
break;
default:
break;
}
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
mem_cgroup_charge_statistics(memcg, anon, -nr_pages);
ClearPageCgroupUsed(pc);
/*
* pc->mem_cgroup is not cleared here. It will be accessed when it's
* freed from LRU. This is safe because uncharged page is expected not
* to be reused (freed soon). Exception is SwapCache, it's handled by
* special functions.
*/
unlock_page_cgroup(pc);
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
/*
* even after unlock, we have memcg->res.usage here and this memcg
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
* will never be freed.
*/
memcg_check_events(memcg, page);
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
if (do_swap_account && ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT) {
mem_cgroup_swap_statistics(memcg, true);
mem_cgroup_get(memcg);
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
}
if (!mem_cgroup_is_root(memcg))
mem_cgroup_do_uncharge(memcg, nr_pages, ctype);
return memcg;
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
unlock_out:
unlock_page_cgroup(pc);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return NULL;
}
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
void mem_cgroup_uncharge_page(struct page *page)
{
/* early check. */
if (page_mapped(page))
return;
VM_BUG_ON(page->mapping && !PageAnon(page));
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
void mem_cgroup_uncharge_cache_page(struct page *page)
{
VM_BUG_ON(page_mapped(page));
VM_BUG_ON(page->mapping);
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
}
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
/*
* Batch_start/batch_end is called in unmap_page_range/invlidate/trucate.
* In that cases, pages are freed continuously and we can expect pages
* are in the same memcg. All these calls itself limits the number of
* pages freed at once, then uncharge_start/end() is called properly.
* This may be called prural(2) times in a context,
*/
void mem_cgroup_uncharge_start(void)
{
current->memcg_batch.do_batch++;
/* We can do nest. */
if (current->memcg_batch.do_batch == 1) {
current->memcg_batch.memcg = NULL;
current->memcg_batch.nr_pages = 0;
current->memcg_batch.memsw_nr_pages = 0;
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
}
}
void mem_cgroup_uncharge_end(void)
{
struct memcg_batch_info *batch = &current->memcg_batch;
if (!batch->do_batch)
return;
batch->do_batch--;
if (batch->do_batch) /* If stacked, do nothing. */
return;
if (!batch->memcg)
return;
/*
* This "batch->memcg" is valid without any css_get/put etc...
* bacause we hide charges behind us.
*/
if (batch->nr_pages)
res_counter_uncharge(&batch->memcg->res,
batch->nr_pages * PAGE_SIZE);
if (batch->memsw_nr_pages)
res_counter_uncharge(&batch->memcg->memsw,
batch->memsw_nr_pages * PAGE_SIZE);
memcg_oom_recover(batch->memcg);
memcg: coalesce uncharge during unmap/truncate In massive parallel enviroment, res_counter can be a performance bottleneck. One strong techinque to reduce lock contention is reducing calls by coalescing some amount of calls into one. Considering charge/uncharge chatacteristic, - charge is done one by one via demand-paging. - uncharge is done by - in chunk at munmap, truncate, exit, execve... - one by one via vmscan/paging. It seems we have a chance to coalesce uncharges for improving scalability at unmap/truncation. This patch is a for coalescing uncharge. For avoiding scattering memcg's structure to functions under /mm, this patch adds memcg batch uncharge information to the task. A reason for per-task batching is for making use of caller's context information. We do batched uncharge (deleyed uncharge) when truncation/unmap occurs but do direct uncharge when uncharge is called by memory reclaim (vmscan.c). The degree of coalescing depends on callers - at invalidate/trucate... pagevec size - at unmap ....ZAP_BLOCK_SIZE (memory itself will be freed in this degree.) Then, we'll not coalescing too much. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 miss/faults [child with this patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 miss/faults We can see some amounts of improvement. (root cgroup doesn't affected by this patch) Another patch for "charge" will follow this and above will be improved more. Changelog(since 2009/10/02): - renamed filed of memcg_batch (as pages to bytes, memsw to memsw_bytes) - some clean up and commentary/description updates. - added initialize code to copy_process(). (possible bug fix) Changelog(old): - fixed !CONFIG_MEM_CGROUP case. - rebased onto the latest mmotm + softlimit fix patches. - unified patch for callers - added commetns. - make ->do_batch as bool. - removed css_get() at el. We don't need it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:03 +03:00
/* forget this pointer (for sanity check) */
batch->memcg = NULL;
}
#ifdef CONFIG_SWAP
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/*
* called after __delete_from_swap_cache() and drop "page" account.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
* memcg information is recorded to swap_cgroup of "ent"
*/
void
mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
{
struct mem_cgroup *memcg;
int ctype = MEM_CGROUP_CHARGE_TYPE_SWAPOUT;
if (!swapout) /* this was a swap cache but the swap is unused ! */
ctype = MEM_CGROUP_CHARGE_TYPE_DROP;
memcg = __mem_cgroup_uncharge_common(page, ctype);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
memcg: avoid css_get() Now, memory cgroup increments css(cgroup subsys state)'s reference count per a charged page. And the reference count is kept until the page is uncharged. But this has 2 bad effect. 1. Because css_get/put calls atomic_inc()/dec, heavy call of them on large smp will not scale well. 2. Because css's refcnt cannot be in a state as "ready-to-release", cgroup's notify_on_release handler can't work with memcg. 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small. This has been a problem since the 1st merge of memcg. This is a trial to remove css's refcnt per a page. Even if we remove refcnt, pre_destroy() does enough synchronization as - check res->usage == 0. - check no pages on LRU. This patch removes css's refcnt per page. Even after this patch, at the 1st look, it seems css_get() is still called in try_charge(). But the logic is. - If a memcg of mm->owner is cached one, consume_stock() will work. At success, return immediately. - If consume_stock returns false, css_get() is called and go to slow path which may be blocked. At the end of slow path, css_put() is called and restart from the start if necessary. So, in the fast path, we don't call css_get() and can avoid access to shared counter. This patch can make the most possible case fast. Here is a result of multi-threaded page fault benchmark. [Before] 25.32% multi-fault-all [kernel.kallsyms] [k] clear_page_c 9.30% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 8.02% multi-fault-all [kernel.kallsyms] [k] try_get_mem_cgroup_from_mm <=====(*) 7.83% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 5.38% multi-fault-all [kernel.kallsyms] [k] __css_put 5.29% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 4.92% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 4.24% multi-fault-all [kernel.kallsyms] [k] up_read 3.53% multi-fault-all [kernel.kallsyms] [k] css_put 2.11% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 1.76% multi-fault-all [kernel.kallsyms] [k] __rmqueue 1.64% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge [After] 28.41% multi-fault-all [kernel.kallsyms] [k] clear_page_c 10.08% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irq 9.58% multi-fault-all [kernel.kallsyms] [k] down_read_trylock 9.38% multi-fault-all [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.86% multi-fault-all [kernel.kallsyms] [k] __alloc_pages_nodemask 5.65% multi-fault-all [kernel.kallsyms] [k] up_read 2.82% multi-fault-all [kernel.kallsyms] [k] handle_mm_fault 2.64% multi-fault-all [kernel.kallsyms] [k] mem_cgroup_add_lru_list 2.48% multi-fault-all [kernel.kallsyms] [k] __mem_cgroup_commit_charge Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch removes css_tryget() in it. (But yes, this is an extreme case.) Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 05:03:02 +04:00
/*
* record memcg information, if swapout && memcg != NULL,
* mem_cgroup_get() was called in uncharge().
*/
if (do_swap_account && swapout && memcg)
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
swap_cgroup_record(ent, css_id(&memcg->css));
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
#endif
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/*
* called from swap_entry_free(). remove record in swap_cgroup and
* uncharge "memsw" account.
*/
void mem_cgroup_uncharge_swap(swp_entry_t ent)
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
{
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
struct mem_cgroup *memcg;
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
unsigned short id;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (!do_swap_account)
return;
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
id = swap_cgroup_record(ent, 0);
rcu_read_lock();
memcg = mem_cgroup_lookup(id);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (memcg) {
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
/*
* We uncharge this because swap is freed.
* This memcg can be obsolete one. We avoid calling css_tryget
*/
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
if (!mem_cgroup_is_root(memcg))
memcg: some modification to softlimit under hierarchical memory reclaim. This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-02 02:44:11 +04:00
res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
mem_cgroup_swap_statistics(memcg, false);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
mem_cgroup_put(memcg);
}
cgroups: use css id in swap cgroup for saving memory v5 Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine, size of swap_cgroup goes down to 2 bytes from 8bytes. This means, when 2GB of swap is equipped, (assume the page size is 4096bytes) From size of swap_cgroup = 2G/4k * 8 = 4Mbytes. To size of swap_cgroup = 2G/4k * 2 = 1Mbytes. Reduction is large. Of course, there are trade-offs. This CSS ID will add overhead to swap-in/swap-out/swap-free. But in general, - swap is a resource which the user tend to avoid use. - If swap is never used, swap_cgroup area is not used. - Reading traditional manuals, size of swap should be proportional to size of memory. Memory size of machine is increasing now. I think reducing size of swap_cgroup makes sense. Note: - ID->CSS lookup routine has no locks, it's under RCU-Read-Side. - memcg can be obsolete at rmdir() but not freed while refcnt from swap_cgroup is available. Changelog v4->v5: - reworked on to memcg-charge-swapcache-to-proper-memcg.patch Changlog ->v4: - fixed not configured case. - deleted unnecessary comments. - fixed NULL pointer bug. - fixed message in dmesg. [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:45 +04:00
rcu_read_unlock();
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
}
/**
* mem_cgroup_move_swap_account - move swap charge and swap_cgroup's record.
* @entry: swap entry to be moved
* @from: mem_cgroup which the entry is moved from
* @to: mem_cgroup which the entry is moved to
* @need_fixup: whether we should fixup res_counters and refcounts.
*
* It succeeds only when the swap_cgroup's record for this entry is the same
* as the mem_cgroup's id of @from.
*
* Returns 0 on success, -EINVAL on failure.
*
* The caller must have charged to @to, IOW, called res_counter_charge() about
* both res and memsw, and called css_get().
*/
static int mem_cgroup_move_swap_account(swp_entry_t entry,
struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
{
unsigned short old_id, new_id;
old_id = css_id(&from->css);
new_id = css_id(&to->css);
if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
mem_cgroup_swap_statistics(from, false);
mem_cgroup_swap_statistics(to, true);
/*
* This function is only called from task migration context now.
* It postpones res_counter and refcount handling till the end
* of task migration(mem_cgroup_clear_mc()) for performance
* improvement. But we cannot postpone mem_cgroup_get(to)
* because if the process that has been moved to @to does
* swap-in, the refcount of @to might be decreased to 0.
*/
mem_cgroup_get(to);
if (need_fixup) {
if (!mem_cgroup_is_root(from))
res_counter_uncharge(&from->memsw, PAGE_SIZE);
mem_cgroup_put(from);
/*
* we charged both to->res and to->memsw, so we should
* uncharge to->res.
*/
if (!mem_cgroup_is_root(to))
res_counter_uncharge(&to->res, PAGE_SIZE);
}
return 0;
}
return -EINVAL;
}
#else
static inline int mem_cgroup_move_swap_account(swp_entry_t entry,
struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
{
return -EINVAL;
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
#endif
memcg: handle swap caches SwapCache support for memory resource controller (memcg) Before mem+swap controller, memcg itself should handle SwapCache in proper way. This is cut-out from it. In current memcg, SwapCache is just leaked and the user can create tons of SwapCache. This is a leak of account and should be handled. SwapCache accounting is done as following. charge (anon) - charged when it's mapped. (because of readahead, charge at add_to_swap_cache() is not sane) uncharge (anon) - uncharged when it's dropped from swapcache and fully unmapped. means it's not uncharged at unmap. Note: delete from swap cache at swap-in is done after rmap information is established. charge (shmem) - charged at swap-in. this prevents charge at add_to_page_cache(). uncharge (shmem) - uncharged when it's dropped from swapcache and not on shmem's radix-tree. at migration, check against 'old page' is modified to handle shmem. Comparing to the old version discussed (and caused troubles), we have advantages of - PCG_USED bit. - simple migrating handling. So, situation is much easier than several months ago, maybe. [hugh@veritas.com: memcg: handle swap caches build fix] Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:56 +03:00
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
/*
* Before starting migration, account PAGE_SIZE to mem_cgroup that the old
* page belongs to.
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
*/
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
int mem_cgroup_prepare_migration(struct page *page,
struct page *newpage, struct mem_cgroup **memcgp, gfp_t gfp_mask)
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
{
struct mem_cgroup *memcg = NULL;
struct page_cgroup *pc;
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
enum charge_type ctype;
int ret = 0;
*memcgp = NULL;
VM_BUG_ON(PageTransHuge(page));
if (mem_cgroup_disabled())
return 0;
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
memcg = pc->mem_cgroup;
css_get(&memcg->css);
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/*
* At migrating an anonymous page, its mapcount goes down
* to 0 and uncharge() will be called. But, even if it's fully
* unmapped, migration may fail and this page has to be
* charged again. We set MIGRATION flag here and delay uncharge
* until end_migration() is called
*
* Corner Case Thinking
* A)
* When the old page was mapped as Anon and it's unmap-and-freed
* while migration was ongoing.
* If unmap finds the old page, uncharge() of it will be delayed
* until end_migration(). If unmap finds a new page, it's
* uncharged when it make mapcount to be 1->0. If unmap code
* finds swap_migration_entry, the new page will not be mapped
* and end_migration() will find it(mapcount==0).
*
* B)
* When the old page was mapped but migraion fails, the kernel
* remaps it. A charge for it is kept by MIGRATION flag even
* if mapcount goes down to 0. We can do remap successfully
* without charging it again.
*
* C)
* The "old" page is under lock_page() until the end of
* migration, so, the old page itself will not be swapped-out.
* If the new page is swapped out before end_migraton, our
* hook to usual swap-out path will catch the event.
*/
if (PageAnon(page))
SetPageCgroupMigration(pc);
}
unlock_page_cgroup(pc);
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/*
* If the page is not charged at this point,
* we return here.
*/
if (!memcg)
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
return 0;
*memcgp = memcg;
ret = __mem_cgroup_try_charge(NULL, gfp_mask, 1, memcgp, false);
css_put(&memcg->css);/* drop extra refcnt */
if (ret) {
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
if (PageAnon(page)) {
lock_page_cgroup(pc);
ClearPageCgroupMigration(pc);
unlock_page_cgroup(pc);
/*
* The old page may be fully unmapped while we kept it.
*/
mem_cgroup_uncharge_page(page);
}
/* we'll need to revisit this error code (we have -EINTR) */
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
return -ENOMEM;
}
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/*
* We charge new page before it's used/mapped. So, even if unlock_page()
* is called before end_migration, we can catch all events on this new
* page. In the case new page is migrated but not remapped, new page's
* mapcount will be finally 0 and we call uncharge in end_migration().
*/
pc = lookup_page_cgroup(newpage);
if (PageAnon(page))
ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED;
else if (page_is_file_cache(page))
ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
else
ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
__mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false);
return ret;
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
}
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
/* remove redundant charge if migration failed*/
void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok)
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
{
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
struct page *used, *unused;
struct page_cgroup *pc;
bool anon;
if (!memcg)
return;
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/* blocks rmdir() */
cgroup_exclude_rmdir(&memcg->css);
if (!migration_ok) {
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
used = oldpage;
unused = newpage;
} else {
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
used = newpage;
unused = oldpage;
}
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
/*
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
* We disallowed uncharge of pages under migration because mapcount
* of the page goes down to zero, temporarly.
* Clear the flag and check the page should be charged.
*/
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
pc = lookup_page_cgroup(oldpage);
lock_page_cgroup(pc);
ClearPageCgroupMigration(pc);
unlock_page_cgroup(pc);
anon = PageAnon(used);
__mem_cgroup_uncharge_common(unused,
anon ? MEM_CGROUP_CHARGE_TYPE_MAPPED
: MEM_CGROUP_CHARGE_TYPE_CACHE);
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
/*
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
* If a page is a file cache, radix-tree replacement is very atomic
* and we can skip this check. When it was an Anon page, its mapcount
* goes down to 0. But because we added MIGRATION flage, it's not
* uncharged yet. There are several case but page->mapcount check
* and USED bit check in mem_cgroup_uncharge_page() will do enough
* check. (see prepare_charge() also)
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:47:14 +04:00
*/
if (anon)
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
mem_cgroup_uncharge_page(used);
/*
memcg: fix mis-accounting of file mapped racy with migration FILE_MAPPED per memcg of migrated file cache is not properly updated, because our hook in page_add_file_rmap() can't know to which memcg FILE_MAPPED should be counted. Basically, this patch is for fixing the bug but includes some big changes to fix up other messes. Now, at migrating mapped file, events happen in following sequence. 1. allocate a new page. 2. get memcg of an old page. 3. charge ageinst a new page before migration. But at this point, no changes to new page's page_cgroup, no commit for the charge. (IOW, PCG_USED bit is not set.) 4. page migration replaces radix-tree, old-page and new-page. 5. page migration remaps the new page if the old page was mapped. 6. Here, the new page is unlocked. 7. memcg commits the charge for newpage, Mark the new page's page_cgroup as PCG_USED. Because "commit" happens after page-remap, we can count FILE_MAPPED at "5", because we should avoid to trust page_cgroup->mem_cgroup. if PCG_USED bit is unset. (Note: memcg's LRU removal code does that but LRU-isolation logic is used for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is not on LRU or page_cgroup->mem_cgroup is NULL.) We can lose file_mapped accounting information at 5 because FILE_MAPPED is updated only when mapcount changes 0->1. So we should catch it. BTW, historically, above implemntation comes from migration-failure of anonymous page. Because we charge both of old page and new page with mapcount=0, we can't catch - the page is really freed before remap. - migration fails but it's freed before remap or .....corner cases. New migration sequence with memcg is: 1. allocate a new page. 2. mark PageCgroupMigration to the old page. 3. charge against a new page onto the old page's memcg. (here, new page's pc is marked as PageCgroupUsed.) 4. page migration replaces radix-tree, page table, etc... 5. At remapping, new page's page_cgroup is now makrked as "USED" We can catch 0->1 event and FILE_MAPPED will be properly updated. And we can catch SWAPOUT event after unlock this and freeing this page by unmap() can be caught. 7. Clear PageCgroupMigration of the old page. So, FILE_MAPPED will be correctly updated. Then, for what MIGRATION flag is ? Without it, at migration failure, we may have to charge old page again because it may be fully unmapped. "charge" means that we have to dive into memory reclaim or something complated. So, it's better to avoid charge it again. Before this patch, __commit_charge() was working for both of the old/new page and fixed up all. But this technique has some racy condtion around FILE_MAPPED and SWAPOUT etc... Now, the kernel use MIGRATION flag and don't uncharge old page until the end of migration. I hope this change will make memcg's page migration much simpler. This page migration has caused several troubles. Worth to add a flag for simplification. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 01:42:46 +04:00
* At migration, we may charge account against cgroup which has no
* tasks.
* So, rmdir()->pre_destroy() can be called while we do this charge.
* In that case, we need to call pre_destroy() again. check it here.
*/
cgroup_release_and_wakeup_rmdir(&memcg->css);
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:10 +03:00
}
memcg: add mem_cgroup_replace_page_cache() to fix LRU issue Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a function replace_page_cache_page(). This function replaces a page in the radix-tree with a new page. WHen doing this, memory cgroup needs to fix up the accounting information. memcg need to check PCG_USED bit etc. In some(many?) cases, 'newpage' is on LRU before calling replace_page_cache(). So, memcg's LRU accounting information should be fixed, too. This patch adds mem_cgroup_replace_page_cache() and removes the old hooks. In that function, old pages will be unaccounted without touching res_counter and new page will be accounted to the memcg (of old page). WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid races with LRU handling. Background: replace_page_cache_page() is called by FUSE code in its splice() handling. Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated page and may be on LRU. LRU mis-accounting will be critical for memory cgroup because rmdir() checks the whole LRU is empty and there is no account leak. If a page is on the other LRU than it should be, rmdir() will fail. This bug was added in March 2011, but no bug report yet. I guess there are not many people who use memcg and FUSE at the same time with upstream kernels. The result of this bug is that admin cannot destroy a memcg because of account leak. So, no panic, no deadlock. And, even if an active cgroup exist, umount can succseed. So no problem at shutdown. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:44 +04:00
/*
* At replace page cache, newpage is not under any memcg but it's on
* LRU. So, this function doesn't touch res_counter but handles LRU
* in correct way. Both pages are locked so we cannot race with uncharge.
*/
void mem_cgroup_replace_page_cache(struct page *oldpage,
struct page *newpage)
{
struct mem_cgroup *memcg;
struct page_cgroup *pc;
enum charge_type type = MEM_CGROUP_CHARGE_TYPE_CACHE;
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(oldpage);
/* fix accounting on old pages */
lock_page_cgroup(pc);
memcg = pc->mem_cgroup;
mem_cgroup_charge_statistics(memcg, false, -1);
memcg: add mem_cgroup_replace_page_cache() to fix LRU issue Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a function replace_page_cache_page(). This function replaces a page in the radix-tree with a new page. WHen doing this, memory cgroup needs to fix up the accounting information. memcg need to check PCG_USED bit etc. In some(many?) cases, 'newpage' is on LRU before calling replace_page_cache(). So, memcg's LRU accounting information should be fixed, too. This patch adds mem_cgroup_replace_page_cache() and removes the old hooks. In that function, old pages will be unaccounted without touching res_counter and new page will be accounted to the memcg (of old page). WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid races with LRU handling. Background: replace_page_cache_page() is called by FUSE code in its splice() handling. Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated page and may be on LRU. LRU mis-accounting will be critical for memory cgroup because rmdir() checks the whole LRU is empty and there is no account leak. If a page is on the other LRU than it should be, rmdir() will fail. This bug was added in March 2011, but no bug report yet. I guess there are not many people who use memcg and FUSE at the same time with upstream kernels. The result of this bug is that admin cannot destroy a memcg because of account leak. So, no panic, no deadlock. And, even if an active cgroup exist, umount can succseed. So no problem at shutdown. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:44 +04:00
ClearPageCgroupUsed(pc);
unlock_page_cgroup(pc);
if (PageSwapBacked(oldpage))
type = MEM_CGROUP_CHARGE_TYPE_SHMEM;
/*
* Even if newpage->mapping was NULL before starting replacement,
* the newpage may be on LRU(or pagevec for LRU) already. We lock
* LRU while we overwrite pc->mem_cgroup.
*/
__mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true);
memcg: add mem_cgroup_replace_page_cache() to fix LRU issue Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a function replace_page_cache_page(). This function replaces a page in the radix-tree with a new page. WHen doing this, memory cgroup needs to fix up the accounting information. memcg need to check PCG_USED bit etc. In some(many?) cases, 'newpage' is on LRU before calling replace_page_cache(). So, memcg's LRU accounting information should be fixed, too. This patch adds mem_cgroup_replace_page_cache() and removes the old hooks. In that function, old pages will be unaccounted without touching res_counter and new page will be accounted to the memcg (of old page). WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid races with LRU handling. Background: replace_page_cache_page() is called by FUSE code in its splice() handling. Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated page and may be on LRU. LRU mis-accounting will be critical for memory cgroup because rmdir() checks the whole LRU is empty and there is no account leak. If a page is on the other LRU than it should be, rmdir() will fail. This bug was added in March 2011, but no bug report yet. I guess there are not many people who use memcg and FUSE at the same time with upstream kernels. The result of this bug is that admin cannot destroy a memcg because of account leak. So, no panic, no deadlock. And, even if an active cgroup exist, umount can succseed. So no problem at shutdown. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 05:17:44 +04:00
}
#ifdef CONFIG_DEBUG_VM
static struct page_cgroup *lookup_page_cgroup_used(struct page *page)
{
struct page_cgroup *pc;
pc = lookup_page_cgroup(page);
/*
* Can be NULL while feeding pages into the page allocator for
* the first time, i.e. during boot or memory hotplug;
* or when mem_cgroup_disabled().
*/
if (likely(pc) && PageCgroupUsed(pc))
return pc;
return NULL;
}
bool mem_cgroup_bad_page_check(struct page *page)
{
if (mem_cgroup_disabled())
return false;
return lookup_page_cgroup_used(page) != NULL;
}
void mem_cgroup_print_bad_page(struct page *page)
{
struct page_cgroup *pc;
pc = lookup_page_cgroup_used(page);
if (pc) {
printk(KERN_ALERT "pc:%p pc->flags:%lx pc->mem_cgroup:%p\n",
pc, pc->flags, pc->mem_cgroup);
}
}
#endif
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
static DEFINE_MUTEX(set_limit_mutex);
static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
unsigned long long val)
{
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
int retry_count;
u64 memswlimit, memlimit;
int ret = 0;
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
int children = mem_cgroup_count_children(memcg);
u64 curusage, oldusage;
int enlarge;
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
/*
* For keeping hierarchical_reclaim simple, how long we should retry
* is depends on callers. We set our retry-count to be function
* of # of children which we should visit in this loop.
*/
retry_count = MEM_CGROUP_RECLAIM_RETRIES * children;
oldusage = res_counter_read_u64(&memcg->res, RES_USAGE);
enlarge = 0;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
while (retry_count) {
if (signal_pending(current)) {
ret = -EINTR;
break;
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
* We have to guarantee memcg->res.limit < memcg->memsw.limit.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
*/
mutex_lock(&set_limit_mutex);
memswlimit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
if (memswlimit < val) {
ret = -EINVAL;
mutex_unlock(&set_limit_mutex);
break;
}
memlimit = res_counter_read_u64(&memcg->res, RES_LIMIT);
if (memlimit < val)
enlarge = 1;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
ret = res_counter_set_limit(&memcg->res, val);
if (!ret) {
if (memswlimit == val)
memcg->memsw_is_minimum = true;
else
memcg->memsw_is_minimum = false;
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
mutex_unlock(&set_limit_mutex);
if (!ret)
break;
mem_cgroup_reclaim(memcg, GFP_KERNEL,
MEM_CGROUP_RECLAIM_SHRINK);
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
curusage = res_counter_read_u64(&memcg->res, RES_USAGE);
/* Usage is reduced ? */
if (curusage >= oldusage)
retry_count--;
else
oldusage = curusage;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
if (!ret && enlarge)
memcg_oom_recover(memcg);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return ret;
}
static int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
unsigned long long val)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
{
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
int retry_count;
u64 memlimit, memswlimit, oldusage, curusage;
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
int children = mem_cgroup_count_children(memcg);
int ret = -EBUSY;
int enlarge = 0;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
/* see mem_cgroup_resize_res_limit */
retry_count = children * MEM_CGROUP_RECLAIM_RETRIES;
oldusage = res_counter_read_u64(&memcg->memsw, RES_USAGE);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
while (retry_count) {
if (signal_pending(current)) {
ret = -EINTR;
break;
}
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
* We have to guarantee memcg->res.limit < memcg->memsw.limit.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
*/
mutex_lock(&set_limit_mutex);
memlimit = res_counter_read_u64(&memcg->res, RES_LIMIT);
if (memlimit > val) {
ret = -EINVAL;
mutex_unlock(&set_limit_mutex);
break;
}
memswlimit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
if (memswlimit < val)
enlarge = 1;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
ret = res_counter_set_limit(&memcg->memsw, val);
if (!ret) {
if (memlimit == val)
memcg->memsw_is_minimum = true;
else
memcg->memsw_is_minimum = false;
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
mutex_unlock(&set_limit_mutex);
if (!ret)
break;
mem_cgroup_reclaim(memcg, GFP_KERNEL,
MEM_CGROUP_RECLAIM_NOSWAP |
MEM_CGROUP_RECLAIM_SHRINK);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
curusage = res_counter_read_u64(&memcg->memsw, RES_USAGE);
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
/* Usage is reduced ? */
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (curusage >= oldusage)
retry_count--;
memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm As pointed out, shrinking memcg's limit should return -EBUSY after reasonable retries. This patch tries to fix the current behavior of shrink_usage. Before looking into "shrink should return -EBUSY" problem, we should fix hierarchical reclaim code. It compares current usage and current limit, but it only makes sense when the kernel reclaims memory because hit limits. This is also a problem. What this patch does are. 1. add new argument "shrink" to hierarchical reclaim. If "shrink==true", hierarchical reclaim returns immediately and the caller checks the kernel should shrink more or not. (At shrinking memory, usage is always smaller than limit. So check for usage < limit is useless.) 2. For adjusting to above change, 2 changes in "shrink"'s retry path. 2-a. retry_count depends on # of children because the kernel visits the children under hierarchy one by one. 2-b. rather than checking return value of hierarchical_reclaim's progress, compares usage-before-shrink and usage-after-shrink. If usage-before-shrink <= usage-after-shrink, retry_count is decremented. Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 03:57:36 +04:00
else
oldusage = curusage;
}
if (!ret && enlarge)
memcg_oom_recover(memcg);
return ret;
}
2009-09-24 02:56:39 +04:00
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:25 +04:00
gfp_t gfp_mask,
unsigned long *total_scanned)
2009-09-24 02:56:39 +04:00
{
unsigned long nr_reclaimed = 0;
struct mem_cgroup_per_zone *mz, *next_mz = NULL;
unsigned long reclaimed;
int loop = 0;
struct mem_cgroup_tree_per_zone *mctz;
unsigned long long excess;
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:25 +04:00
unsigned long nr_scanned;
2009-09-24 02:56:39 +04:00
if (order > 0)
return 0;
mctz = soft_limit_tree_node_zone(zone_to_nid(zone), zone_idx(zone));
2009-09-24 02:56:39 +04:00
/*
* This loop can run a while, specially if mem_cgroup's continuously
* keep exceeding their soft limit and putting the system under
* pressure
*/
do {
if (next_mz)
mz = next_mz;
else
mz = mem_cgroup_largest_soft_limit_node(mctz);
if (!mz)
break;
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:25 +04:00
nr_scanned = 0;
reclaimed = mem_cgroup_soft_reclaim(mz->memcg, zone,
gfp_mask, &nr_scanned);
2009-09-24 02:56:39 +04:00
nr_reclaimed += reclaimed;
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:25 +04:00
*total_scanned += nr_scanned;
2009-09-24 02:56:39 +04:00
spin_lock(&mctz->lock);
/*
* If we failed to reclaim anything from this memory cgroup
* it is time to move on to the next cgroup
*/
next_mz = NULL;
if (!reclaimed) {
do {
/*
* Loop until we find yet another one.
*
* By the time we get the soft_limit lock
* again, someone might have aded the
* group back on the RB tree. Iterate to
* make sure we get a different mem.
* mem_cgroup_largest_soft_limit_node returns
* NULL if no other cgroup is present on
* the tree
*/
next_mz =
__mem_cgroup_largest_soft_limit_node(mctz);
if (next_mz == mz)
css_put(&next_mz->memcg->css);
else /* next_mz == NULL or other memcg */
2009-09-24 02:56:39 +04:00
break;
} while (1);
}
__mem_cgroup_remove_exceeded(mz->memcg, mz, mctz);
excess = res_counter_soft_limit_excess(&mz->memcg->res);
2009-09-24 02:56:39 +04:00
/*
* One school of thought says that we should not add
* back the node to the tree if reclaim returns 0.
* But our reclaim could return 0, simply because due
* to priority we are exposing a smaller subset of
* memory to reclaim from. Consider this as a longer
* term TODO.
*/
/* If excess == 0, no tree ops */
__mem_cgroup_insert_exceeded(mz->memcg, mz, mctz, excess);
2009-09-24 02:56:39 +04:00
spin_unlock(&mctz->lock);
css_put(&mz->memcg->css);
2009-09-24 02:56:39 +04:00
loop++;
/*
* Could not reclaim anything and there are no more
* mem cgroups to try or we seem to be looping without
* reclaiming anything.
*/
if (!nr_reclaimed &&
(next_mz == NULL ||
loop > MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS))
break;
} while (!nr_reclaimed);
if (next_mz)
css_put(&next_mz->memcg->css);
2009-09-24 02:56:39 +04:00
return nr_reclaimed;
}
/*
* This routine traverse page_cgroup in given list and drop them all.
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
*/
static int mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
int node, int zid, enum lru_list lru)
{
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
struct mem_cgroup_per_zone *mz;
unsigned long flags, loop;
struct list_head *list;
struct page *busy;
struct zone *zone;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
int ret = 0;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
zone = &NODE_DATA(node)->node_zones[zid];
mz = mem_cgroup_zoneinfo(memcg, node, zid);
list = &mz->lruvec.lists[lru];
loop = mz->lru_size[lru];
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/* give some margin against EBUSY etc...*/
loop += 256;
busy = NULL;
while (loop--) {
struct page_cgroup *pc;
struct page *page;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
ret = 0;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
spin_lock_irqsave(&zone->lru_lock, flags);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (list_empty(list)) {
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
spin_unlock_irqrestore(&zone->lru_lock, flags);
break;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
}
page = list_entry(list->prev, struct page, lru);
if (busy == page) {
list_move(&page->lru, list);
busy = NULL;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
spin_unlock_irqrestore(&zone->lru_lock, flags);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
continue;
}
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
spin_unlock_irqrestore(&zone->lru_lock, flags);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
pc = lookup_page_cgroup(page);
ret = mem_cgroup_move_parent(page, pc, memcg, GFP_KERNEL);
if (ret == -ENOMEM || ret == -EINTR)
break;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (ret == -EBUSY || ret == -EINVAL) {
/* found lock contention or "pc" is obsolete. */
busy = page;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
cond_resched();
} else
busy = NULL;
}
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (!ret && !list_empty(list))
return -EBUSY;
return ret;
}
/*
* make mem_cgroup's charge to be 0 if there is no task.
* This enables deleting this mem_cgroup.
*/
static int mem_cgroup_force_empty(struct mem_cgroup *memcg, bool free_all)
{
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
int ret;
int node, zid, shrink;
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
struct cgroup *cgrp = memcg->css.cgroup;
css_get(&memcg->css);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
shrink = 0;
/* should free all ? */
if (free_all)
goto try_to_free;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
move_account:
memcg: ensure list is empty at rmdir Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[<ffffffff810fbc11>] [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [<ffffffff810c739a>] release_pages+0x142/0x1e7 [1530745.950651] [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112 [1530745.950651] [<ffffffff810c78a9>] lru_add_drain+0x76/0x94 [1530745.950651] [<ffffffff810dba0c>] exit_mmap+0x6e/0x145 [1530745.950651] [<ffffffff8103f52d>] mmput+0x5e/0xcf [1530745.950651] [<ffffffff81043ea8>] exit_mm+0x11c/0x129 [1530745.950651] [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9 [1530745.950651] [<ffffffff81045353>] do_exit+0x1f5/0x6b7 [1530745.950651] [<ffffffff8106133f>] ? up_read+0x2b/0x2f [1530745.950651] [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [<ffffffff81045898>] do_group_exit+0x83/0xb0 [1530745.950651] [<ffffffff810458dc>] sys_exit_group+0x17/0x1b [1530745.950651] [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP <ffff8803863ddcb8> [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 04:01:30 +03:00
do {
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
ret = -EBUSY;
if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children))
goto out;
ret = -EINTR;
if (signal_pending(current))
goto out;
/* This is for making all *used* pages to be on LRU. */
lru_add_drain_all();
drain_all_stock_sync(memcg);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
ret = 0;
mem_cgroup_start_move(memcg);
for_each_node_state(node, N_HIGH_MEMORY) {
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) {
enum lru_list lru;
for_each_lru(lru) {
ret = mem_cgroup_force_empty_list(memcg,
node, zid, lru);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (ret)
break;
}
}
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
if (ret)
break;
}
mem_cgroup_end_move(memcg);
memcg_oom_recover(memcg);
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/* it seems parent cgroup doesn't have enough mem */
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
memcg: ensure list is empty at rmdir Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[<ffffffff810fbc11>] [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [<ffffffff810c739a>] release_pages+0x142/0x1e7 [1530745.950651] [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112 [1530745.950651] [<ffffffff810c78a9>] lru_add_drain+0x76/0x94 [1530745.950651] [<ffffffff810dba0c>] exit_mmap+0x6e/0x145 [1530745.950651] [<ffffffff8103f52d>] mmput+0x5e/0xcf [1530745.950651] [<ffffffff81043ea8>] exit_mm+0x11c/0x129 [1530745.950651] [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9 [1530745.950651] [<ffffffff81045353>] do_exit+0x1f5/0x6b7 [1530745.950651] [<ffffffff8106133f>] ? up_read+0x2b/0x2f [1530745.950651] [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [<ffffffff81045898>] do_group_exit+0x83/0xb0 [1530745.950651] [<ffffffff810458dc>] sys_exit_group+0x17/0x1b [1530745.950651] [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP <ffff8803863ddcb8> [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 04:01:30 +03:00
/* "ret" should also be checked to ensure all lists are empty. */
} while (memcg->res.usage > 0 || ret);
out:
css_put(&memcg->css);
return ret;
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
try_to_free:
/* returns EBUSY if there is a task or if we come here twice. */
if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children) || shrink) {
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
ret = -EBUSY;
goto out;
}
/* we call try-to-free pages for make this cgroup empty */
lru_add_drain_all();
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/* try to free all pages in this cgroup */
shrink = 1;
while (nr_retries && memcg->res.usage > 0) {
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
int progress;
if (signal_pending(current)) {
ret = -EINTR;
goto out;
}
progress = try_to_free_mem_cgroup_pages(memcg, GFP_KERNEL,
false);
if (!progress) {
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
nr_retries--;
/* maybe some writeback is necessary */
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
}
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
lru_add_drain();
memcg: move all acccounting to parent at rmdir() This patch provides a function to move account information of a page between mem_cgroups and rewrite force_empty to make use of this. This moving of page_cgroup is done under - lru_lock of source/destination mem_cgroup is held. - lock_page_cgroup() is held. Then, a routine which touches pc->mem_cgroup without lock_page_cgroup() should confirm pc->mem_cgroup is still valid or not. Typical code can be following. (while page is not under lock_page()) mem = pc->mem_cgroup; mz = page_cgroup_zoneinfo(pc) spin_lock_irqsave(&mz->lru_lock); if (pc->mem_cgroup == mem) ...../* some list handling */ spin_unlock_irqrestore(&mz->lru_lock); Of course, better way is lock_page_cgroup(pc); .... unlock_page_cgroup(pc); But you should confirm the nest of lock and avoid deadlock. If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock, you don't have to worry about what pc->mem_cgroup points to. moved pages are added to head of lru, not to tail. Expected users of this routine is: - force_empty (rmdir) - moving tasks between cgroup (for moving account information.) - hierarchy (maybe useful.) force_empty(rmdir) uses this move_account and move pages to its parent. This "move" will not cause OOM (I added "oom" parameter to try_charge().) If the parent is busy (not enough memory), force_empty calls try_to_free_page() and reduce usage. Purpose of this behavior is - Fix "forget all" behavior of force_empty and avoid leak of accounting. - By "moving first, free if necessary", keep pages on memory as much as possible. Adding a switch to change behavior of force_empty to - free first, move if necessary - free all, if there is mlocked/busy pages, return -EBUSY. is under consideration. (I'll add if someone requtests.) This patch also removes memory.force_empty file, a brutal debug-only interface. Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:07:53 +03:00
/* try move_account...there may be some *locked* pages. */
memcg: ensure list is empty at rmdir Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[<ffffffff810fbc11>] [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [<ffffffff810c739a>] release_pages+0x142/0x1e7 [1530745.950651] [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112 [1530745.950651] [<ffffffff810c78a9>] lru_add_drain+0x76/0x94 [1530745.950651] [<ffffffff810dba0c>] exit_mmap+0x6e/0x145 [1530745.950651] [<ffffffff8103f52d>] mmput+0x5e/0xcf [1530745.950651] [<ffffffff81043ea8>] exit_mm+0x11c/0x129 [1530745.950651] [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9 [1530745.950651] [<ffffffff81045353>] do_exit+0x1f5/0x6b7 [1530745.950651] [<ffffffff8106133f>] ? up_read+0x2b/0x2f [1530745.950651] [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [<ffffffff81045898>] do_group_exit+0x83/0xb0 [1530745.950651] [<ffffffff810458dc>] sys_exit_group+0x17/0x1b [1530745.950651] [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP <ffff8803863ddcb8> [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 04:01:30 +03:00
goto move_account;
}
int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event)
{
return mem_cgroup_force_empty(mem_cgroup_from_cont(cont), true);
}
static u64 mem_cgroup_hierarchy_read(struct cgroup *cont, struct cftype *cft)
{
return mem_cgroup_from_cont(cont)->use_hierarchy;
}
static int mem_cgroup_hierarchy_write(struct cgroup *cont, struct cftype *cft,
u64 val)
{
int retval = 0;
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
struct cgroup *parent = cont->parent;
struct mem_cgroup *parent_memcg = NULL;
if (parent)
parent_memcg = mem_cgroup_from_cont(parent);
cgroup_lock();
/*
* If parent's use_hierarchy is set, we can't make any modifications
* in the child subtrees. If it is unset, then the change can
* occur, provided the current cgroup has no children.
*
* For the root cgroup, parent_mem is NULL, we allow value to be
* set if there are no children.
*/
if ((!parent_memcg || !parent_memcg->use_hierarchy) &&
(val == 1 || val == 0)) {
if (list_empty(&cont->children))
memcg->use_hierarchy = val;
else
retval = -EBUSY;
} else
retval = -EINVAL;
cgroup_unlock();
return retval;
}
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
static unsigned long mem_cgroup_recursive_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
{
struct mem_cgroup *iter;
long val = 0;
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
/* Per-cpu values can be negative, use a signed accumulator */
for_each_mem_cgroup_tree(iter, memcg)
val += mem_cgroup_read_stat(iter, idx);
if (val < 0) /* race ? */
val = 0;
return val;
memcg: improve resource counter scalability Reduce the resource counter overhead (mostly spinlock) associated with the root cgroup. This is a part of the several patches to reduce mem cgroup overhead. I had posted other approaches earlier (including using percpu counters). Those patches will be a natural addition and will be added iteratively on top of these. The patch stops resource counter accounting for the root cgroup. The data for display is derived from the statisitcs we maintain via mem_cgroup_charge_statistics (which is more scalable). What happens today is that, we do double accounting, once using res_counter_charge() and once using memory_cgroup_charge_statistics(). For the root, since we don't implement limits any more, we don't need to track every charge via res_counter_charge() and check for limit being exceeded and reclaim. The main mem->res usage_in_bytes can be derived by summing the cache and rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need additional data about swapped out memory. This patch adds a MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed recursively when hierarchy is enabled. The tests results I see on a 24 way show that 1. The lock contention disappears from /proc/lock_stats 2. The results of the test are comparable to running with cgroup_disable=memory. Here is a sample of my program runs Without Patch Performance counter stats for '/home/balbir/parallel_pagefault': 7192804.124144 task-clock-msecs # 23.937 CPUs 424691 context-switches # 0.000 M/sec 267 CPU-migrations # 0.000 M/sec 28498113 page-faults # 0.004 M/sec 5826093739340 cycles # 809.989 M/sec 408883496292 instructions # 0.070 IPC 7057079452 cache-references # 0.981 M/sec 3036086243 cache-misses # 0.422 M/sec 300.485365680 seconds time elapsed With cgroup_disable=memory Performance counter stats for '/home/balbir/parallel_pagefault': 7182183.546587 task-clock-msecs # 23.915 CPUs 425458 context-switches # 0.000 M/sec 203 CPU-migrations # 0.000 M/sec 92545093 page-faults # 0.013 M/sec 6034363609986 cycles # 840.185 M/sec 437204346785 instructions # 0.072 IPC 6636073192 cache-references # 0.924 M/sec 2358117732 cache-misses # 0.328 M/sec 300.320905827 seconds time elapsed With this patch applied Performance counter stats for '/home/balbir/parallel_pagefault': 7191619.223977 task-clock-msecs # 23.955 CPUs 422579 context-switches # 0.000 M/sec 88 CPU-migrations # 0.000 M/sec 91946060 page-faults # 0.013 M/sec 5957054385619 cycles # 828.333 M/sec 1058117350365 instructions # 0.178 IPC 9161776218 cache-references # 1.274 M/sec 1920494280 cache-misses # 0.267 M/sec 300.218764862 seconds time elapsed Data from Prarit (kernel compile with make -j64 on a 64 CPU/32G machine) For a single run Without patch real 27m8.988s user 87m24.916s sys 382m6.037s With patch real 4m18.607s user 84m58.943s sys 50m52.682s With config turned off real 4m54.972s user 90m13.456s sys 50m19.711s NOTE: The data looks counterintuitive due to the increased performance with the patch, even over the config being turned off. We probably need more runs, but so far all testing has shown that the patches definitely help. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 02:56:42 +04:00
}
static inline u64 mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
{
u64 val;
if (!mem_cgroup_is_root(memcg)) {
if (!swap)
return res_counter_read_u64(&memcg->res, RES_USAGE);
else
return res_counter_read_u64(&memcg->memsw, RES_USAGE);
}
val = mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_CACHE);
val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_RSS);
if (swap)
val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
return val << PAGE_SHIFT;
}
static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
u64 val;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
int type, name;
type = MEMFILE_TYPE(cft->private);
name = MEMFILE_ATTR(cft->private);
switch (type) {
case _MEM:
if (name == RES_USAGE)
val = mem_cgroup_usage(memcg, false);
else
val = res_counter_read_u64(&memcg->res, name);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
break;
case _MEMSWAP:
if (name == RES_USAGE)
val = mem_cgroup_usage(memcg, true);
else
val = res_counter_read_u64(&memcg->memsw, name);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
break;
default:
BUG();
break;
}
return val;
}
/*
* The user of this function is...
* RES_LIMIT.
*/
static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
const char *buffer)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
int type, name;
unsigned long long val;
int ret;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
type = MEMFILE_TYPE(cft->private);
name = MEMFILE_ATTR(cft->private);
switch (name) {
case RES_LIMIT:
if (mem_cgroup_is_root(memcg)) { /* Can't set limit on root */
ret = -EINVAL;
break;
}
/* This function does all necessary parse...reuse it */
ret = res_counter_memparse_write_strategy(buffer, &val);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (ret)
break;
if (type == _MEM)
ret = mem_cgroup_resize_limit(memcg, val);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
else
ret = mem_cgroup_resize_memsw_limit(memcg, val);
break;
case RES_SOFT_LIMIT:
ret = res_counter_memparse_write_strategy(buffer, &val);
if (ret)
break;
/*
* For memsw, soft limits are hard to implement in terms
* of semantics, for now, we support soft limits for
* control without swap
*/
if (type == _MEM)
ret = res_counter_set_soft_limit(&memcg->res, val);
else
ret = -EINVAL;
break;
default:
ret = -EINVAL; /* should be BUG() ? */
break;
}
return ret;
}
static void memcg_get_hierarchical_limit(struct mem_cgroup *memcg,
unsigned long long *mem_limit, unsigned long long *memsw_limit)
{
struct cgroup *cgroup;
unsigned long long min_limit, min_memsw_limit, tmp;
min_limit = res_counter_read_u64(&memcg->res, RES_LIMIT);
min_memsw_limit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
cgroup = memcg->css.cgroup;
if (!memcg->use_hierarchy)
goto out;
while (cgroup->parent) {
cgroup = cgroup->parent;
memcg = mem_cgroup_from_cont(cgroup);
if (!memcg->use_hierarchy)
break;
tmp = res_counter_read_u64(&memcg->res, RES_LIMIT);
min_limit = min(min_limit, tmp);
tmp = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
min_memsw_limit = min(min_memsw_limit, tmp);
}
out:
*mem_limit = min_limit;
*memsw_limit = min_memsw_limit;
}
static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
{
struct mem_cgroup *memcg;
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
int type, name;
memcg = mem_cgroup_from_cont(cont);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
type = MEMFILE_TYPE(event);
name = MEMFILE_ATTR(event);
switch (name) {
case RES_MAX_USAGE:
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (type == _MEM)
res_counter_reset_max(&memcg->res);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
else
res_counter_reset_max(&memcg->memsw);
break;
case RES_FAILCNT:
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
if (type == _MEM)
res_counter_reset_failcnt(&memcg->res);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
else
res_counter_reset_failcnt(&memcg->memsw);
break;
}
return 0;
}
static u64 mem_cgroup_move_charge_read(struct cgroup *cgrp,
struct cftype *cft)
{
return mem_cgroup_from_cont(cgrp)->move_charge_at_immigrate;
}
#ifdef CONFIG_MMU
static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
if (val >= (1 << NR_MOVE_TYPE))
return -EINVAL;
/*
* We check this value several times in both in can_attach() and
* attach(), so we need cgroup lock to prevent this value from being
* inconsistent.
*/
cgroup_lock();
memcg->move_charge_at_immigrate = val;
cgroup_unlock();
return 0;
}
#else
static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
return -ENOSYS;
}
#endif
/* For read statistics */
enum {
MCS_CACHE,
MCS_RSS,
MCS_FILE_MAPPED,
MCS_PGPGIN,
MCS_PGPGOUT,
MCS_SWAP,
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
MCS_PGFAULT,
MCS_PGMAJFAULT,
MCS_INACTIVE_ANON,
MCS_ACTIVE_ANON,
MCS_INACTIVE_FILE,
MCS_ACTIVE_FILE,
MCS_UNEVICTABLE,
NR_MCS_STAT,
};
struct mcs_total_stat {
s64 stat[NR_MCS_STAT];
};
struct {
char *local_name;
char *total_name;
} memcg_stat_strings[NR_MCS_STAT] = {
{"cache", "total_cache"},
{"rss", "total_rss"},
{"mapped_file", "total_mapped_file"},
{"pgpgin", "total_pgpgin"},
{"pgpgout", "total_pgpgout"},
{"swap", "total_swap"},
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
{"pgfault", "total_pgfault"},
{"pgmajfault", "total_pgmajfault"},
{"inactive_anon", "total_inactive_anon"},
{"active_anon", "total_active_anon"},
{"inactive_file", "total_inactive_file"},
{"active_file", "total_active_file"},
{"unevictable", "total_unevictable"}
};
static void
mem_cgroup_get_local_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
s64 val;
/* per cpu stat */
val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_CACHE);
s->stat[MCS_CACHE] += val * PAGE_SIZE;
val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_RSS);
s->stat[MCS_RSS] += val * PAGE_SIZE;
val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
s->stat[MCS_FILE_MAPPED] += val * PAGE_SIZE;
val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGIN);
s->stat[MCS_PGPGIN] += val;
val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGOUT);
s->stat[MCS_PGPGOUT] += val;
if (do_swap_account) {
val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
s->stat[MCS_SWAP] += val * PAGE_SIZE;
}
val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGFAULT);
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
s->stat[MCS_PGFAULT] += val;
val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGMAJFAULT);
memcg: add the pagefault count into memcg stats Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [akpm@linux-foundation.org: fix build] [hughd@google.com: shmem fix] Signed-off-by: Ying Han <yinghan@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 03:25:38 +04:00
s->stat[MCS_PGMAJFAULT] += val;
/* per zone stat */
val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_ANON));
s->stat[MCS_INACTIVE_ANON] += val * PAGE_SIZE;
val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_ANON));
s->stat[MCS_ACTIVE_ANON] += val * PAGE_SIZE;
val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_FILE));
s->stat[MCS_INACTIVE_FILE] += val * PAGE_SIZE;
val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_FILE));
s->stat[MCS_ACTIVE_FILE] += val * PAGE_SIZE;
val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_UNEVICTABLE));
s->stat[MCS_UNEVICTABLE] += val * PAGE_SIZE;
}
static void
mem_cgroup_get_total_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
struct mem_cgroup *iter;
for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_get_local_stat(iter, s);
}
#ifdef CONFIG_NUMA
static int mem_control_numa_stat_show(struct seq_file *m, void *arg)
{
int nid;
unsigned long total_nr, file_nr, anon_nr, unevictable_nr;
unsigned long node_nr;
struct cgroup *cont = m->private;
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
total_nr = mem_cgroup_nr_lru_pages(memcg, LRU_ALL);
seq_printf(m, "total=%lu", total_nr);
for_each_node_state(nid, N_HIGH_MEMORY) {
node_nr = mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL);
seq_printf(m, " N%d=%lu", nid, node_nr);
}
seq_putc(m, '\n');
file_nr = mem_cgroup_nr_lru_pages(memcg, LRU_ALL_FILE);
seq_printf(m, "file=%lu", file_nr);
for_each_node_state(nid, N_HIGH_MEMORY) {
node_nr = mem_cgroup_node_nr_lru_pages(memcg, nid,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
LRU_ALL_FILE);
seq_printf(m, " N%d=%lu", nid, node_nr);
}
seq_putc(m, '\n');
anon_nr = mem_cgroup_nr_lru_pages(memcg, LRU_ALL_ANON);
seq_printf(m, "anon=%lu", anon_nr);
for_each_node_state(nid, N_HIGH_MEMORY) {
node_nr = mem_cgroup_node_nr_lru_pages(memcg, nid,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
LRU_ALL_ANON);
seq_printf(m, " N%d=%lu", nid, node_nr);
}
seq_putc(m, '\n');
unevictable_nr = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_UNEVICTABLE));
seq_printf(m, "unevictable=%lu", unevictable_nr);
for_each_node_state(nid, N_HIGH_MEMORY) {
node_nr = mem_cgroup_node_nr_lru_pages(memcg, nid,
memcg: consolidate memory cgroup lru stat functions In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:22 +04:00
BIT(LRU_UNEVICTABLE));
seq_printf(m, " N%d=%lu", nid, node_nr);
}
seq_putc(m, '\n');
return 0;
}
#endif /* CONFIG_NUMA */
static int mem_control_stat_show(struct cgroup *cont, struct cftype *cft,
struct cgroup_map_cb *cb)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
struct mcs_total_stat mystat;
int i;
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_local_stat(memcg, &mystat);
for (i = 0; i < NR_MCS_STAT; i++) {
if (i == MCS_SWAP && !do_swap_account)
continue;
cb->fill(cb, memcg_stat_strings[i].local_name, mystat.stat[i]);
}
/* Hierarchical information */
{
unsigned long long limit, memsw_limit;
memcg_get_hierarchical_limit(memcg, &limit, &memsw_limit);
cb->fill(cb, "hierarchical_memory_limit", limit);
if (do_swap_account)
cb->fill(cb, "hierarchical_memsw_limit", memsw_limit);
}
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_total_stat(memcg, &mystat);
for (i = 0; i < NR_MCS_STAT; i++) {
if (i == MCS_SWAP && !do_swap_account)
continue;
cb->fill(cb, memcg_stat_strings[i].total_name, mystat.stat[i]);
}
#ifdef CONFIG_DEBUG_VM
{
int nid, zid;
struct mem_cgroup_per_zone *mz;
unsigned long recent_rotated[2] = {0, 0};
unsigned long recent_scanned[2] = {0, 0};
for_each_online_node(nid)
for (zid = 0; zid < MAX_NR_ZONES; zid++) {
mz = mem_cgroup_zoneinfo(memcg, nid, zid);
recent_rotated[0] +=
mz->reclaim_stat.recent_rotated[0];
recent_rotated[1] +=
mz->reclaim_stat.recent_rotated[1];
recent_scanned[0] +=
mz->reclaim_stat.recent_scanned[0];
recent_scanned[1] +=
mz->reclaim_stat.recent_scanned[1];
}
cb->fill(cb, "recent_rotated_anon", recent_rotated[0]);
cb->fill(cb, "recent_rotated_file", recent_rotated[1]);
cb->fill(cb, "recent_scanned_anon", recent_scanned[0]);
cb->fill(cb, "recent_scanned_file", recent_scanned[1]);
}
#endif
return 0;
}
static u64 mem_cgroup_swappiness_read(struct cgroup *cgrp, struct cftype *cft)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
return mem_cgroup_swappiness(memcg);
}
static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
u64 val)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup *parent;
if (val > 100)
return -EINVAL;
if (cgrp->parent == NULL)
return -EINVAL;
parent = mem_cgroup_from_cont(cgrp->parent);
cgroup_lock();
/* If under hierarchy, only empty-root can set this value */
if ((parent->use_hierarchy) ||
(memcg->use_hierarchy && !list_empty(&cgrp->children))) {
cgroup_unlock();
return -EINVAL;
}
memcg->swappiness = val;
cgroup_unlock();
return 0;
}
static void __mem_cgroup_threshold(struct mem_cgroup *memcg, bool swap)
{
struct mem_cgroup_threshold_ary *t;
u64 usage;
int i;
rcu_read_lock();
if (!swap)
t = rcu_dereference(memcg->thresholds.primary);
else
t = rcu_dereference(memcg->memsw_thresholds.primary);
if (!t)
goto unlock;
usage = mem_cgroup_usage(memcg, swap);
/*
* current_threshold points to threshold just below usage.
* If it's not true, a threshold was crossed after last
* call of __mem_cgroup_threshold().
*/
i = t->current_threshold;
/*
* Iterate backward over array of thresholds starting from
* current_threshold and check if a threshold is crossed.
* If none of thresholds below usage is crossed, we read
* only one element of the array here.
*/
for (; i >= 0 && unlikely(t->entries[i].threshold > usage); i--)
eventfd_signal(t->entries[i].eventfd, 1);
/* i = current_threshold + 1 */
i++;
/*
* Iterate forward over array of thresholds starting from
* current_threshold+1 and check if a threshold is crossed.
* If none of thresholds above usage is crossed, we read
* only one element of the array here.
*/
for (; i < t->size && unlikely(t->entries[i].threshold <= usage); i++)
eventfd_signal(t->entries[i].eventfd, 1);
/* Update current_threshold */
t->current_threshold = i - 1;
unlock:
rcu_read_unlock();
}
static void mem_cgroup_threshold(struct mem_cgroup *memcg)
{
while (memcg) {
__mem_cgroup_threshold(memcg, false);
if (do_swap_account)
__mem_cgroup_threshold(memcg, true);
memcg = parent_mem_cgroup(memcg);
}
}
static int compare_thresholds(const void *a, const void *b)
{
const struct mem_cgroup_threshold *_a = a;
const struct mem_cgroup_threshold *_b = b;
return _a->threshold - _b->threshold;
}
static int mem_cgroup_oom_notify_cb(struct mem_cgroup *memcg)
{
struct mem_cgroup_eventfd_list *ev;
list_for_each_entry(ev, &memcg->oom_notify, list)
eventfd_signal(ev->eventfd, 1);
return 0;
}
static void mem_cgroup_oom_notify(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_oom_notify_cb(iter);
}
static int mem_cgroup_usage_register_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd, const char *args)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_thresholds *thresholds;
struct mem_cgroup_threshold_ary *new;
int type = MEMFILE_TYPE(cft->private);
u64 threshold, usage;
int i, size, ret;
ret = res_counter_memparse_write_strategy(args, &threshold);
if (ret)
return ret;
mutex_lock(&memcg->thresholds_lock);
if (type == _MEM)
thresholds = &memcg->thresholds;
else if (type == _MEMSWAP)
thresholds = &memcg->memsw_thresholds;
else
BUG();
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before adding a new one */
if (thresholds->primary)
__mem_cgroup_threshold(memcg, type == _MEMSWAP);
size = thresholds->primary ? thresholds->primary->size + 1 : 1;
/* Allocate memory for new array of thresholds */
new = kmalloc(sizeof(*new) + size * sizeof(struct mem_cgroup_threshold),
GFP_KERNEL);
if (!new) {
ret = -ENOMEM;
goto unlock;
}
new->size = size;
/* Copy thresholds (if any) to new array */
if (thresholds->primary) {
memcpy(new->entries, thresholds->primary->entries, (size - 1) *
sizeof(struct mem_cgroup_threshold));
}
/* Add new threshold */
new->entries[size - 1].eventfd = eventfd;
new->entries[size - 1].threshold = threshold;
/* Sort thresholds. Registering of new threshold isn't time-critical */
sort(new->entries, size, sizeof(struct mem_cgroup_threshold),
compare_thresholds, NULL);
/* Find current threshold */
new->current_threshold = -1;
for (i = 0; i < size; i++) {
if (new->entries[i].threshold < usage) {
/*
* new->current_threshold will not be used until
* rcu_assign_pointer(), so it's safe to increment
* it here.
*/
++new->current_threshold;
}
}
/* Free old spare buffer and save old primary buffer as spare */
kfree(thresholds->spare);
thresholds->spare = thresholds->primary;
rcu_assign_pointer(thresholds->primary, new);
/* To be sure that nobody uses thresholds */
synchronize_rcu();
unlock:
mutex_unlock(&memcg->thresholds_lock);
return ret;
}
static void mem_cgroup_usage_unregister_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_thresholds *thresholds;
struct mem_cgroup_threshold_ary *new;
int type = MEMFILE_TYPE(cft->private);
u64 usage;
int i, j, size;
mutex_lock(&memcg->thresholds_lock);
if (type == _MEM)
thresholds = &memcg->thresholds;
else if (type == _MEMSWAP)
thresholds = &memcg->memsw_thresholds;
else
BUG();
/*
* Something went wrong if we trying to unregister a threshold
* if we don't have thresholds
*/
BUG_ON(!thresholds);
mm: memcg: Correct unregistring of events attached to the same eventfd There is an issue when memcg unregisters events that were attached to the same eventfd: - On the first call mem_cgroup_usage_unregister_event() removes all events attached to a given eventfd, and if there were no events left, thresholds->primary would become NULL; - Since there were several events registered, cgroups core will call mem_cgroup_usage_unregister_event() again, but now kernel will oops, as the function doesn't expect that threshold->primary may be NULL. That's a good question whether mem_cgroup_usage_unregister_event() should actually remove all events in one go, but nowadays it can't do any better as cftype->unregister_event callback doesn't pass any private event-associated cookie. So, let's fix the issue by simply checking for threshold->primary. FWIW, w/o the patch the following oops may be observed: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs RIP: 0010:[<ffffffff810be32c>] [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 RSP: 0018:ffff88001d0b9d60 EFLAGS: 00010246 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0) Call Trace: [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60 [<ffffffff8103db94>] process_one_work+0x174/0x450 [<ffffffff8103e413>] worker_thread+0x123/0x2d0 Cc: stable <stable@vger.kernel.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24 05:14:46 +04:00
if (!thresholds->primary)
goto unlock;
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before removing */
__mem_cgroup_threshold(memcg, type == _MEMSWAP);
/* Calculate new number of threshold */
size = 0;
for (i = 0; i < thresholds->primary->size; i++) {
if (thresholds->primary->entries[i].eventfd != eventfd)
size++;
}
new = thresholds->spare;
/* Set thresholds array to NULL if we don't have thresholds */
if (!size) {
kfree(new);
new = NULL;
goto swap_buffers;
}
new->size = size;
/* Copy thresholds and find current threshold */
new->current_threshold = -1;
for (i = 0, j = 0; i < thresholds->primary->size; i++) {
if (thresholds->primary->entries[i].eventfd == eventfd)
continue;
new->entries[j] = thresholds->primary->entries[i];
if (new->entries[j].threshold < usage) {
/*
* new->current_threshold will not be used
* until rcu_assign_pointer(), so it's safe to increment
* it here.
*/
++new->current_threshold;
}
j++;
}
swap_buffers:
/* Swap primary and spare array */
thresholds->spare = thresholds->primary;
rcu_assign_pointer(thresholds->primary, new);
/* To be sure that nobody uses thresholds */
synchronize_rcu();
mm: memcg: Correct unregistring of events attached to the same eventfd There is an issue when memcg unregisters events that were attached to the same eventfd: - On the first call mem_cgroup_usage_unregister_event() removes all events attached to a given eventfd, and if there were no events left, thresholds->primary would become NULL; - Since there were several events registered, cgroups core will call mem_cgroup_usage_unregister_event() again, but now kernel will oops, as the function doesn't expect that threshold->primary may be NULL. That's a good question whether mem_cgroup_usage_unregister_event() should actually remove all events in one go, but nowadays it can't do any better as cftype->unregister_event callback doesn't pass any private event-associated cookie. So, let's fix the issue by simply checking for threshold->primary. FWIW, w/o the patch the following oops may be observed: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs RIP: 0010:[<ffffffff810be32c>] [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 RSP: 0018:ffff88001d0b9d60 EFLAGS: 00010246 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0) Call Trace: [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60 [<ffffffff8103db94>] process_one_work+0x174/0x450 [<ffffffff8103e413>] worker_thread+0x123/0x2d0 Cc: stable <stable@vger.kernel.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24 05:14:46 +04:00
unlock:
mutex_unlock(&memcg->thresholds_lock);
}
static int mem_cgroup_oom_register_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd, const char *args)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_eventfd_list *event;
int type = MEMFILE_TYPE(cft->private);
BUG_ON(type != _OOM_TYPE);
event = kmalloc(sizeof(*event), GFP_KERNEL);
if (!event)
return -ENOMEM;
spin_lock(&memcg_oom_lock);
event->eventfd = eventfd;
list_add(&event->list, &memcg->oom_notify);
/* already in OOM ? */
memcg: make oom_lock 0 and 1 based rather than counter Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 03:08:23 +04:00
if (atomic_read(&memcg->under_oom))
eventfd_signal(eventfd, 1);
spin_unlock(&memcg_oom_lock);
return 0;
}
static void mem_cgroup_oom_unregister_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_eventfd_list *ev, *tmp;
int type = MEMFILE_TYPE(cft->private);
BUG_ON(type != _OOM_TYPE);
spin_lock(&memcg_oom_lock);
list_for_each_entry_safe(ev, tmp, &memcg->oom_notify, list) {
if (ev->eventfd == eventfd) {
list_del(&ev->list);
kfree(ev);
}
}
spin_unlock(&memcg_oom_lock);
}
static int mem_cgroup_oom_control_read(struct cgroup *cgrp,
struct cftype *cft, struct cgroup_map_cb *cb)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
cb->fill(cb, "oom_kill_disable", memcg->oom_kill_disable);
if (atomic_read(&memcg->under_oom))
cb->fill(cb, "under_oom", 1);
else
cb->fill(cb, "under_oom", 0);
return 0;
}
static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup *parent;
/* cannot set to root cgroup and only 0 and 1 are allowed */
if (!cgrp->parent || !((val == 0) || (val == 1)))
return -EINVAL;
parent = mem_cgroup_from_cont(cgrp->parent);
cgroup_lock();
/* oom-kill-disable is a flag for subhierarchy. */
if ((parent->use_hierarchy) ||
(memcg->use_hierarchy && !list_empty(&cgrp->children))) {
cgroup_unlock();
return -EINVAL;
}
memcg->oom_kill_disable = val;
if (!val)
memcg_oom_recover(memcg);
cgroup_unlock();
return 0;
}
#ifdef CONFIG_NUMA
static const struct file_operations mem_control_numa_stat_file_operations = {
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int mem_control_numa_stat_open(struct inode *unused, struct file *file)
{
struct cgroup *cont = file->f_dentry->d_parent->d_fsdata;
file->f_op = &mem_control_numa_stat_file_operations;
return single_open(file, mem_control_numa_stat_show, cont);
}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
static int register_kmem_files(struct cgroup *cont, struct cgroup_subsys *ss)
{
/*
* Part of this would be better living in a separate allocation
* function, leaving us with just the cgroup tree population work.
* We, however, depend on state such as network's proto_list that
* is only initialized after cgroup creation. I found the less
* cumbersome way to deal with it to defer it all to populate time
*/
return mem_cgroup_sockets_init(cont, ss);
};
static void kmem_cgroup_destroy(struct cgroup *cont)
{
mem_cgroup_sockets_destroy(cont);
}
#else
static int register_kmem_files(struct cgroup *cont, struct cgroup_subsys *ss)
{
return 0;
}
static void kmem_cgroup_destroy(struct cgroup *cont)
{
}
#endif
static struct cftype mem_cgroup_files[] = {
{
.name = "usage_in_bytes",
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
.private = MEMFILE_PRIVATE(_MEM, RES_USAGE),
.read_u64 = mem_cgroup_read,
.register_event = mem_cgroup_usage_register_event,
.unregister_event = mem_cgroup_usage_unregister_event,
},
{
.name = "max_usage_in_bytes",
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
.private = MEMFILE_PRIVATE(_MEM, RES_MAX_USAGE),
.trigger = mem_cgroup_reset,
.read_u64 = mem_cgroup_read,
},
{
.name = "limit_in_bytes",
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
.private = MEMFILE_PRIVATE(_MEM, RES_LIMIT),
.write_string = mem_cgroup_write,
.read_u64 = mem_cgroup_read,
},
{
.name = "soft_limit_in_bytes",
.private = MEMFILE_PRIVATE(_MEM, RES_SOFT_LIMIT),
.write_string = mem_cgroup_write,
.read_u64 = mem_cgroup_read,
},
{
.name = "failcnt",
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
.private = MEMFILE_PRIVATE(_MEM, RES_FAILCNT),
.trigger = mem_cgroup_reset,
.read_u64 = mem_cgroup_read,
},
{
.name = "stat",
.read_map = mem_control_stat_show,
},
{
.name = "force_empty",
.trigger = mem_cgroup_force_empty_write,
},
{
.name = "use_hierarchy",
.write_u64 = mem_cgroup_hierarchy_write,
.read_u64 = mem_cgroup_hierarchy_read,
},
{
.name = "swappiness",
.read_u64 = mem_cgroup_swappiness_read,
.write_u64 = mem_cgroup_swappiness_write,
},
{
.name = "move_charge_at_immigrate",
.read_u64 = mem_cgroup_move_charge_read,
.write_u64 = mem_cgroup_move_charge_write,
},
{
.name = "oom_control",
.read_map = mem_cgroup_oom_control_read,
.write_u64 = mem_cgroup_oom_control_write,
.register_event = mem_cgroup_oom_register_event,
.unregister_event = mem_cgroup_oom_unregister_event,
.private = MEMFILE_PRIVATE(_OOM_TYPE, OOM_CONTROL),
},
#ifdef CONFIG_NUMA
{
.name = "numa_stat",
.open = mem_control_numa_stat_open,
.mode = S_IRUGO,
},
#endif
};
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
static struct cftype memsw_cgroup_files[] = {
{
.name = "memsw.usage_in_bytes",
.private = MEMFILE_PRIVATE(_MEMSWAP, RES_USAGE),
.read_u64 = mem_cgroup_read,
.register_event = mem_cgroup_usage_register_event,
.unregister_event = mem_cgroup_usage_unregister_event,
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
},
{
.name = "memsw.max_usage_in_bytes",
.private = MEMFILE_PRIVATE(_MEMSWAP, RES_MAX_USAGE),
.trigger = mem_cgroup_reset,
.read_u64 = mem_cgroup_read,
},
{
.name = "memsw.limit_in_bytes",
.private = MEMFILE_PRIVATE(_MEMSWAP, RES_LIMIT),
.write_string = mem_cgroup_write,
.read_u64 = mem_cgroup_read,
},
{
.name = "memsw.failcnt",
.private = MEMFILE_PRIVATE(_MEMSWAP, RES_FAILCNT),
.trigger = mem_cgroup_reset,
.read_u64 = mem_cgroup_read,
},
};
static int register_memsw_files(struct cgroup *cont, struct cgroup_subsys *ss)
{
if (!do_swap_account)
return 0;
return cgroup_add_files(cont, ss, memsw_cgroup_files,
ARRAY_SIZE(memsw_cgroup_files));
};
#else
static int register_memsw_files(struct cgroup *cont, struct cgroup_subsys *ss)
{
return 0;
}
#endif
static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
struct mem_cgroup_per_node *pn;
struct mem_cgroup_per_zone *mz;
enum lru_list lru;
int zone, tmp = node;
/*
* This routine is called against possible nodes.
* But it's BUG to call kmalloc() against offline node.
*
* TODO: this routine can waste much memory for nodes which will
* never be onlined. It's better to use memory hotplug callback
* function.
*/
if (!node_state(node, N_NORMAL_MEMORY))
tmp = -1;
pn = kzalloc_node(sizeof(*pn), GFP_KERNEL, tmp);
if (!pn)
return 1;
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = &pn->zoneinfo[zone];
for_each_lru(lru)
INIT_LIST_HEAD(&mz->lruvec.lists[lru]);
mz->usage_in_excess = 0;
2009-09-24 02:56:39 +04:00
mz->on_tree = false;
mz->memcg = memcg;
}
memcg->info.nodeinfo[node] = pn;
return 0;
}
static void free_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
kfree(memcg->info.nodeinfo[node]);
}
static struct mem_cgroup *mem_cgroup_alloc(void)
{
struct mem_cgroup *memcg;
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
int size = sizeof(struct mem_cgroup);
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
/* Can be very big if MAX_NUMNODES is very big */
if (size < PAGE_SIZE)
memcg = kzalloc(size, GFP_KERNEL);
else
memcg = vzalloc(size);
if (!memcg)
return NULL;
memcg->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
if (!memcg->stat)
goto out_free;
spin_lock_init(&memcg->pcp_counter_lock);
return memcg;
out_free:
if (size < PAGE_SIZE)
kfree(memcg);
else
vfree(memcg);
return NULL;
}
memcg: free mem_cgroup by RCU to fix oops After fixing the GPF in mem_cgroup_lru_del_list(), three times one machine running a similar load (moving and removing memcgs while swapping) has oopsed in mem_cgroup_zone_nr_lru_pages(), when retrieving memcg zone numbers for get_scan_count() for shrink_mem_cgroup_zone(): this is where a struct mem_cgroup is first accessed after being chosen by mem_cgroup_iter(). Just what protects a struct mem_cgroup from being freed, in between mem_cgroup_iter()'s css_get_next() and its css_tryget()? css_tryget() fails once css->refcnt is zero with CSS_REMOVED set in flags, yes: but what if that memory is freed and reused for something else, which sets "refcnt" non-zero? Hmm, and scope for an indefinite freeze if refcnt is left at zero but flags are cleared. It's tempting to move the css_tryget() into css_get_next(), to make it really "get" the css, but I don't think that actually solves anything: the same difficulty in moving from css_id found to stable css remains. But we already have rcu_read_lock() around the two, so it's easily fixed if __mem_cgroup_free() just uses kfree_rcu() to free mem_cgroup. However, a big struct mem_cgroup is allocated with vzalloc() instead of kzalloc(), and we're not allowed to vfree() at interrupt time: there doesn't appear to be a general vfree_rcu() to help with this, so roll our own using schedule_work(). The compiler decently removes vfree_work() and vfree_rcu() when the config doesn't need them. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16 02:17:07 +04:00
/*
* Helpers for freeing a vzalloc()ed mem_cgroup by RCU,
* but in process context. The work_freeing structure is overlaid
* on the rcu_freeing structure, which itself is overlaid on memsw.
*/
static void vfree_work(struct work_struct *work)
{
struct mem_cgroup *memcg;
memcg = container_of(work, struct mem_cgroup, work_freeing);
vfree(memcg);
}
static void vfree_rcu(struct rcu_head *rcu_head)
{
struct mem_cgroup *memcg;
memcg = container_of(rcu_head, struct mem_cgroup, rcu_freeing);
INIT_WORK(&memcg->work_freeing, vfree_work);
schedule_work(&memcg->work_freeing);
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
/*
* At destroying mem_cgroup, references from swap_cgroup can remain.
* (scanning all at force_empty is too costly...)
*
* Instead of clearing all references at force_empty, we remember
* the number of reference from swap_cgroup and free mem_cgroup when
* it goes down to 0.
*
* Removal of cgroup itself succeeds regardless of refs from swap.
*/
static void __mem_cgroup_free(struct mem_cgroup *memcg)
{
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
int node;
mem_cgroup_remove_from_trees(memcg);
free_css_id(&mem_cgroup_subsys, &memcg->css);
for_each_node(node)
free_mem_cgroup_per_zone_info(memcg, node);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
free_percpu(memcg->stat);
memcg: use generic percpu instead of private implementation When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 02:22:29 +03:00
if (sizeof(struct mem_cgroup) < PAGE_SIZE)
memcg: free mem_cgroup by RCU to fix oops After fixing the GPF in mem_cgroup_lru_del_list(), three times one machine running a similar load (moving and removing memcgs while swapping) has oopsed in mem_cgroup_zone_nr_lru_pages(), when retrieving memcg zone numbers for get_scan_count() for shrink_mem_cgroup_zone(): this is where a struct mem_cgroup is first accessed after being chosen by mem_cgroup_iter(). Just what protects a struct mem_cgroup from being freed, in between mem_cgroup_iter()'s css_get_next() and its css_tryget()? css_tryget() fails once css->refcnt is zero with CSS_REMOVED set in flags, yes: but what if that memory is freed and reused for something else, which sets "refcnt" non-zero? Hmm, and scope for an indefinite freeze if refcnt is left at zero but flags are cleared. It's tempting to move the css_tryget() into css_get_next(), to make it really "get" the css, but I don't think that actually solves anything: the same difficulty in moving from css_id found to stable css remains. But we already have rcu_read_lock() around the two, so it's easily fixed if __mem_cgroup_free() just uses kfree_rcu() to free mem_cgroup. However, a big struct mem_cgroup is allocated with vzalloc() instead of kzalloc(), and we're not allowed to vfree() at interrupt time: there doesn't appear to be a general vfree_rcu() to help with this, so roll our own using schedule_work(). The compiler decently removes vfree_work() and vfree_rcu() when the config doesn't need them. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16 02:17:07 +04:00
kfree_rcu(memcg, rcu_freeing);
else
memcg: free mem_cgroup by RCU to fix oops After fixing the GPF in mem_cgroup_lru_del_list(), three times one machine running a similar load (moving and removing memcgs while swapping) has oopsed in mem_cgroup_zone_nr_lru_pages(), when retrieving memcg zone numbers for get_scan_count() for shrink_mem_cgroup_zone(): this is where a struct mem_cgroup is first accessed after being chosen by mem_cgroup_iter(). Just what protects a struct mem_cgroup from being freed, in between mem_cgroup_iter()'s css_get_next() and its css_tryget()? css_tryget() fails once css->refcnt is zero with CSS_REMOVED set in flags, yes: but what if that memory is freed and reused for something else, which sets "refcnt" non-zero? Hmm, and scope for an indefinite freeze if refcnt is left at zero but flags are cleared. It's tempting to move the css_tryget() into css_get_next(), to make it really "get" the css, but I don't think that actually solves anything: the same difficulty in moving from css_id found to stable css remains. But we already have rcu_read_lock() around the two, so it's easily fixed if __mem_cgroup_free() just uses kfree_rcu() to free mem_cgroup. However, a big struct mem_cgroup is allocated with vzalloc() instead of kzalloc(), and we're not allowed to vfree() at interrupt time: there doesn't appear to be a general vfree_rcu() to help with this, so roll our own using schedule_work(). The compiler decently removes vfree_work() and vfree_rcu() when the config doesn't need them. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16 02:17:07 +04:00
call_rcu(&memcg->rcu_freeing, vfree_rcu);
}
static void mem_cgroup_get(struct mem_cgroup *memcg)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
{
atomic_inc(&memcg->refcnt);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
static void __mem_cgroup_put(struct mem_cgroup *memcg, int count)
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
{
if (atomic_sub_and_test(count, &memcg->refcnt)) {
struct mem_cgroup *parent = parent_mem_cgroup(memcg);
__mem_cgroup_free(memcg);
if (parent)
mem_cgroup_put(parent);
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
}
static void mem_cgroup_put(struct mem_cgroup *memcg)
{
__mem_cgroup_put(memcg, 1);
}
/*
* Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
*/
struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg)
{
if (!memcg->res.parent)
return NULL;
return mem_cgroup_from_res_counter(memcg->res.parent, res);
}
EXPORT_SYMBOL(parent_mem_cgroup);
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
static void __init enable_swap_cgroup(void)
{
if (!mem_cgroup_disabled() && really_do_swap_account)
do_swap_account = 1;
}
#else
static void __init enable_swap_cgroup(void)
{
}
#endif
static int mem_cgroup_soft_limit_tree_init(void)
{
struct mem_cgroup_tree_per_node *rtpn;
struct mem_cgroup_tree_per_zone *rtpz;
int tmp, node, zone;
for_each_node(node) {
tmp = node;
if (!node_state(node, N_NORMAL_MEMORY))
tmp = -1;
rtpn = kzalloc_node(sizeof(*rtpn), GFP_KERNEL, tmp);
if (!rtpn)
goto err_cleanup;
soft_limit_tree.rb_tree_per_node[node] = rtpn;
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
rtpz = &rtpn->rb_tree_per_zone[zone];
rtpz->rb_root = RB_ROOT;
spin_lock_init(&rtpz->lock);
}
}
return 0;
err_cleanup:
for_each_node(node) {
if (!soft_limit_tree.rb_tree_per_node[node])
break;
kfree(soft_limit_tree.rb_tree_per_node[node]);
soft_limit_tree.rb_tree_per_node[node] = NULL;
}
return 1;
}
static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup *cont)
{
struct mem_cgroup *memcg, *parent;
long error = -ENOMEM;
int node;
memcg = mem_cgroup_alloc();
if (!memcg)
return ERR_PTR(error);
for_each_node(node)
if (alloc_mem_cgroup_per_zone_info(memcg, node))
goto free_out;
/* root ? */
if (cont->parent == NULL) {
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
int cpu;
enable_swap_cgroup();
parent = NULL;
if (mem_cgroup_soft_limit_tree_init())
goto free_out;
root_mem_cgroup = memcg;
memcg: coalesce charging via percpu storage This is a patch for coalescing access to res_counter at charging by percpu caching. At charge, memcg charges 64pages and remember it in percpu cache. Because it's cache, drain/flush if necessary. This version uses public percpu area. 2 benefits for using public percpu area. 1. Sum of stocked charge in the system is limited to # of cpus not to the number of memcg. This shows better synchonization. 2. drain code for flush/cpuhotplug is very easy (and quick) The most important point of this patch is that we never touch res_counter in fast path. The res_counter is system-wide shared counter which is modified very frequently. We shouldn't touch it as far as we can for avoiding false sharing. On x86-64 8cpu server, I tested overheads of memcg at page fault by running a program which does map/fault/unmap in a loop. Running a task per a cpu by taskset and see sum of the number of page faults in 60secs. [without memcg config] 40156968 page-faults # 0.085 M/sec ( +- 0.046% ) 27.67 cache-miss/faults [root cgroup] 36659599 page-faults # 0.077 M/sec ( +- 0.247% ) 31.58 cache miss/faults [in a child cgroup] 18444157 page-faults # 0.039 M/sec ( +- 0.133% ) 69.96 cache miss/faults [ + coalescing uncharge patch] 27133719 page-faults # 0.057 M/sec ( +- 0.155% ) 47.16 cache miss/faults [ + coalescing uncharge patch + this patch ] 34224709 page-faults # 0.072 M/sec ( +- 0.173% ) 34.69 cache miss/faults Changelog (since Oct/2): - updated comments - replaced get_cpu_var() with __get_cpu_var() if possible. - removed mutex for system-wide drain. adds a counter instead of it. - removed CONFIG_HOTPLUG_CPU Changelog (old): - rebased onto the latest mmotm - moved charge size check before __GFP_WAIT check for avoiding unnecesary - added asynchronous flush routine. - fixed bugs pointed out by Nishimura-san. [akpm@linux-foundation.org: tweak comments] [nishimura@mxp.nes.nec.co.jp: don't do INIT_WORK() repeatedly against the same work_struct] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 03:47:08 +03:00
for_each_possible_cpu(cpu) {
struct memcg_stock_pcp *stock =
&per_cpu(memcg_stock, cpu);
INIT_WORK(&stock->work, drain_local_stock);
}
hotcpu_notifier(memcg_cpu_hotplug_callback, 0);
} else {
parent = mem_cgroup_from_cont(cont->parent);
memcg->use_hierarchy = parent->use_hierarchy;
memcg->oom_kill_disable = parent->oom_kill_disable;
}
if (parent && parent->use_hierarchy) {
res_counter_init(&memcg->res, &parent->res);
res_counter_init(&memcg->memsw, &parent->memsw);
/*
* We increment refcnt of the parent to ensure that we can
* safely access it on res_counter_charge/uncharge.
* This refcnt will be decremented when freeing this
* mem_cgroup(see mem_cgroup_put).
*/
mem_cgroup_get(parent);
} else {
res_counter_init(&memcg->res, NULL);
res_counter_init(&memcg->memsw, NULL);
}
memcg->last_scanned_node = MAX_NUMNODES;
INIT_LIST_HEAD(&memcg->oom_notify);
if (parent)
memcg->swappiness = mem_cgroup_swappiness(parent);
atomic_set(&memcg->refcnt, 1);
memcg->move_charge_at_immigrate = 0;
mutex_init(&memcg->thresholds_lock);
spin_lock_init(&memcg->move_lock);
return &memcg->css;
free_out:
__mem_cgroup_free(memcg);
return ERR_PTR(error);
}
static int mem_cgroup_pre_destroy(struct cgroup *cont)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
return mem_cgroup_force_empty(memcg, false);
}
static void mem_cgroup_destroy(struct cgroup *cont)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
kmem_cgroup_destroy(cont);
mem_cgroup_put(memcg);
}
static int mem_cgroup_populate(struct cgroup_subsys *ss,
struct cgroup *cont)
{
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
int ret;
ret = cgroup_add_files(cont, ss, mem_cgroup_files,
ARRAY_SIZE(mem_cgroup_files));
if (!ret)
ret = register_memsw_files(cont, ss);
if (!ret)
ret = register_kmem_files(cont, ss);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:00 +03:00
return ret;
}
#ifdef CONFIG_MMU
/* Handlers for move charge at task migration. */
#define PRECHARGE_COUNT_AT_ONCE 256
static int mem_cgroup_do_precharge(unsigned long count)
{
int ret = 0;
int batch_count = PRECHARGE_COUNT_AT_ONCE;
struct mem_cgroup *memcg = mc.to;
if (mem_cgroup_is_root(memcg)) {
mc.precharge += count;
/* we don't need css_get for root */
return ret;
}
/* try to charge at once */
if (count > 1) {
struct res_counter *dummy;
/*
* "memcg" cannot be under rmdir() because we've already checked
* by cgroup_lock_live_cgroup() that it is not removed and we
* are still under the same cgroup_mutex. So we can postpone
* css_get().
*/
if (res_counter_charge(&memcg->res, PAGE_SIZE * count, &dummy))
goto one_by_one;
if (do_swap_account && res_counter_charge(&memcg->memsw,
PAGE_SIZE * count, &dummy)) {
res_counter_uncharge(&memcg->res, PAGE_SIZE * count);
goto one_by_one;
}
mc.precharge += count;
return ret;
}
one_by_one:
/* fall back to one by one charge */
while (count--) {
if (signal_pending(current)) {
ret = -EINTR;
break;
}
if (!batch_count--) {
batch_count = PRECHARGE_COUNT_AT_ONCE;
cond_resched();
}
ret = __mem_cgroup_try_charge(NULL,
GFP_KERNEL, 1, &memcg, false);
if (ret)
/* mem_cgroup_clear_mc() will do uncharge later */
return ret;
mc.precharge++;
}
return ret;
}
/**
* is_target_pte_for_mc - check a pte whether it is valid for move charge
* @vma: the vma the pte to be checked belongs
* @addr: the address corresponding to the pte to be checked
* @ptent: the pte to be checked
* @target: the pointer the target page or swap ent will be stored(can be NULL)
*
* Returns
* 0(MC_TARGET_NONE): if the pte is not a target for move charge.
* 1(MC_TARGET_PAGE): if the page corresponding to this pte is a target for
* move charge. if @target is not NULL, the page is stored in target->page
* with extra refcnt got(Callers should handle it).
* 2(MC_TARGET_SWAP): if the swap entry corresponding to this pte is a
* target for charge migration. if @target is not NULL, the entry is stored
* in target->ent.
*
* Called with pte lock held.
*/
union mc_target {
struct page *page;
swp_entry_t ent;
};
enum mc_target_type {
MC_TARGET_NONE, /* not used */
MC_TARGET_PAGE,
MC_TARGET_SWAP,
};
static struct page *mc_handle_present_pte(struct vm_area_struct *vma,
unsigned long addr, pte_t ptent)
{
struct page *page = vm_normal_page(vma, addr, ptent);
if (!page || !page_mapped(page))
return NULL;
if (PageAnon(page)) {
/* we don't move shared anon */
if (!move_anon() || page_mapcount(page) > 2)
return NULL;
} else if (!move_file())
/* we ignore mapcount for file pages */
return NULL;
if (!get_page_unless_zero(page))
return NULL;
return page;
}
static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
unsigned long addr, pte_t ptent, swp_entry_t *entry)
{
int usage_count;
struct page *page = NULL;
swp_entry_t ent = pte_to_swp_entry(ptent);
if (!move_anon() || non_swap_entry(ent))
return NULL;
usage_count = mem_cgroup_count_swap_user(ent, &page);
if (usage_count > 1) { /* we don't move shared anon */
if (page)
put_page(page);
return NULL;
}
if (do_swap_account)
entry->val = ent.val;
return page;
}
static struct page *mc_handle_file_pte(struct vm_area_struct *vma,
unsigned long addr, pte_t ptent, swp_entry_t *entry)
{
struct page *page = NULL;
struct inode *inode;
struct address_space *mapping;
pgoff_t pgoff;
if (!vma->vm_file) /* anonymous vma */
return NULL;
if (!move_file())
return NULL;
inode = vma->vm_file->f_path.dentry->d_inode;
mapping = vma->vm_file->f_mapping;
if (pte_none(ptent))
pgoff = linear_page_index(vma, addr);
else /* pte_file(ptent) is true */
pgoff = pte_to_pgoff(ptent);
/* page is moved even if it's not RSS of this task(page-faulted). */
page = find_get_page(mapping, pgoff);
#ifdef CONFIG_SWAP
/* shmem/tmpfs may report page out on swap: account for that too. */
if (radix_tree_exceptional_entry(page)) {
swp_entry_t swap = radix_to_swp_entry(page);
if (do_swap_account)
*entry = swap;
page = find_get_page(&swapper_space, swap.val);
}
#endif
return page;
}
static int is_target_pte_for_mc(struct vm_area_struct *vma,
unsigned long addr, pte_t ptent, union mc_target *target)
{
struct page *page = NULL;
struct page_cgroup *pc;
int ret = 0;
swp_entry_t ent = { .val = 0 };
if (pte_present(ptent))
page = mc_handle_present_pte(vma, addr, ptent);
else if (is_swap_pte(ptent))
page = mc_handle_swap_pte(vma, addr, ptent, &ent);
else if (pte_none(ptent) || pte_file(ptent))
page = mc_handle_file_pte(vma, addr, ptent, &ent);
if (!page && !ent.val)
return 0;
if (page) {
pc = lookup_page_cgroup(page);
/*
* Do only loose check w/o page_cgroup lock.
* mem_cgroup_move_account() checks the pc is valid or not under
* the lock.
*/
if (PageCgroupUsed(pc) && pc->mem_cgroup == mc.from) {
ret = MC_TARGET_PAGE;
if (target)
target->page = page;
}
if (!ret || !target)
put_page(page);
}
/* There is a swap entry and a page doesn't exist or isn't charged */
if (ent.val && !ret &&
css_id(&mc.from->css) == lookup_swap_cgroup_id(ent)) {
ret = MC_TARGET_SWAP;
if (target)
target->ent = ent;
}
return ret;
}
static int mem_cgroup_count_precharge_pte_range(pmd_t *pmd,
unsigned long addr, unsigned long end,
struct mm_walk *walk)
{
struct vm_area_struct *vma = walk->private;
pte_t *pte;
spinlock_t *ptl;
split_huge_page_pmd(walk->mm, pmd);
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 03:33:42 +04:00
if (pmd_trans_unstable(pmd))
return 0;
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; pte++, addr += PAGE_SIZE)
if (is_target_pte_for_mc(vma, addr, *pte, NULL))
mc.precharge++; /* increment precharge temporarily */
pte_unmap_unlock(pte - 1, ptl);
cond_resched();
return 0;
}
static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
{
unsigned long precharge;
struct vm_area_struct *vma;
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
down_read(&mm->mmap_sem);
for (vma = mm->mmap; vma; vma = vma->vm_next) {
struct mm_walk mem_cgroup_count_precharge_walk = {
.pmd_entry = mem_cgroup_count_precharge_pte_range,
.mm = mm,
.private = vma,
};
if (is_vm_hugetlb_page(vma))
continue;
walk_page_range(vma->vm_start, vma->vm_end,
&mem_cgroup_count_precharge_walk);
}
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
up_read(&mm->mmap_sem);
precharge = mc.precharge;
mc.precharge = 0;
return precharge;
}
static int mem_cgroup_precharge_mc(struct mm_struct *mm)
{
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
unsigned long precharge = mem_cgroup_count_precharge(mm);
VM_BUG_ON(mc.moving_task);
mc.moving_task = current;
return mem_cgroup_do_precharge(precharge);
}
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
/* cancels all extra charges on mc.from and mc.to, and wakes up all waiters. */
static void __mem_cgroup_clear_mc(void)
{
struct mem_cgroup *from = mc.from;
struct mem_cgroup *to = mc.to;
/* we must uncharge all the leftover precharges from mc.to */
if (mc.precharge) {
__mem_cgroup_cancel_charge(mc.to, mc.precharge);
mc.precharge = 0;
}
/*
* we didn't uncharge from mc.from at mem_cgroup_move_account(), so
* we must uncharge here.
*/
if (mc.moved_charge) {
__mem_cgroup_cancel_charge(mc.from, mc.moved_charge);
mc.moved_charge = 0;
}
/* we must fixup refcnts and charges */
if (mc.moved_swap) {
/* uncharge swap account from the old cgroup */
if (!mem_cgroup_is_root(mc.from))
res_counter_uncharge(&mc.from->memsw,
PAGE_SIZE * mc.moved_swap);
__mem_cgroup_put(mc.from, mc.moved_swap);
if (!mem_cgroup_is_root(mc.to)) {
/*
* we charged both to->res and to->memsw, so we should
* uncharge to->res.
*/
res_counter_uncharge(&mc.to->res,
PAGE_SIZE * mc.moved_swap);
}
/* we've already done mem_cgroup_get(mc.to) */
mc.moved_swap = 0;
}
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
memcg_oom_recover(from);
memcg_oom_recover(to);
wake_up_all(&mc.waitq);
}
static void mem_cgroup_clear_mc(void)
{
struct mem_cgroup *from = mc.from;
/*
* we must clear moving_task before waking up waiters at the end of
* task migration.
*/
mc.moving_task = NULL;
__mem_cgroup_clear_mc();
spin_lock(&mc.lock);
mc.from = NULL;
mc.to = NULL;
spin_unlock(&mc.lock);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
mem_cgroup_end_move(from);
}
static int mem_cgroup_can_attach(struct cgroup *cgroup,
struct cgroup_taskset *tset)
{
struct task_struct *p = cgroup_taskset_first(tset);
int ret = 0;
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgroup);
if (memcg->move_charge_at_immigrate) {
struct mm_struct *mm;
struct mem_cgroup *from = mem_cgroup_from_task(p);
VM_BUG_ON(from == memcg);
mm = get_task_mm(p);
if (!mm)
return 0;
/* We move charges only when we move a owner of the mm */
if (mm->owner == p) {
VM_BUG_ON(mc.from);
VM_BUG_ON(mc.to);
VM_BUG_ON(mc.precharge);
VM_BUG_ON(mc.moved_charge);
VM_BUG_ON(mc.moved_swap);
memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management At accounting file events per memory cgroup, we need to find memory cgroup via page_cgroup->mem_cgroup. Now, we use lock_page_cgroup() for guarantee pc->mem_cgroup is not overwritten while we make use of it. But, considering the context which page-cgroup for files are accessed, we can use alternative light-weight mutual execusion in the most case. At handling file-caches, the only race we have to take care of is "moving" account, IOW, overwriting page_cgroup->mem_cgroup. (See comment in the patch) Unlike charge/uncharge, "move" happens not so frequently. It happens only when rmdir() and task-moving (with a special settings.) This patch adds a race-checker for file-cache-status accounting v.s. account moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added. The routine for account move 1. Increment it before start moving 2. Call synchronize_rcu() 3. Decrement it after the end of moving. By this, file-status-counting routine can check it needs to call lock_page_cgroup(). In most case, I doesn't need to call it. Following is a perf data of a process which mmap()/munmap 32MB of file cache in a minute. Before patch: 28.25% mmap mmap [.] main 22.64% mmap [kernel.kallsyms] [k] page_fault 9.96% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.67% mmap [kernel.kallsyms] [k] filemap_fault 3.50% mmap [kernel.kallsyms] [k] unmap_vmas 2.99% mmap [kernel.kallsyms] [k] __do_fault 2.76% mmap [kernel.kallsyms] [k] find_get_page After patch: 30.00% mmap mmap [.] main 23.78% mmap [kernel.kallsyms] [k] page_fault 5.52% mmap [kernel.kallsyms] [k] mem_cgroup_update_file_mapped 3.81% mmap [kernel.kallsyms] [k] unmap_vmas 3.26% mmap [kernel.kallsyms] [k] find_get_page 3.18% mmap [kernel.kallsyms] [k] __do_fault 3.03% mmap [kernel.kallsyms] [k] filemap_fault 2.40% mmap [kernel.kallsyms] [k] handle_mm_fault 2.40% mmap [kernel.kallsyms] [k] do_page_fault This patch reduces memcg's cost to some extent. (mem_cgroup_update_file_mapped is called by both of map/unmap) Note: It seems some more improvements are required..but no idea. maybe removing set/unset flag is required. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 02:33:40 +04:00
mem_cgroup_start_move(from);
spin_lock(&mc.lock);
mc.from = from;
mc.to = memcg;
spin_unlock(&mc.lock);
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
/* We set mc.moving_task later */
ret = mem_cgroup_precharge_mc(mm);
if (ret)
mem_cgroup_clear_mc();
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
}
mmput(mm);
}
return ret;
}
static void mem_cgroup_cancel_attach(struct cgroup *cgroup,
struct cgroup_taskset *tset)
{
mem_cgroup_clear_mc();
}
static int mem_cgroup_move_charge_pte_range(pmd_t *pmd,
unsigned long addr, unsigned long end,
struct mm_walk *walk)
{
int ret = 0;
struct vm_area_struct *vma = walk->private;
pte_t *pte;
spinlock_t *ptl;
split_huge_page_pmd(walk->mm, pmd);
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 03:33:42 +04:00
if (pmd_trans_unstable(pmd))
return 0;
retry:
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
for (; addr != end; addr += PAGE_SIZE) {
pte_t ptent = *(pte++);
union mc_target target;
int type;
struct page *page;
struct page_cgroup *pc;
swp_entry_t ent;
if (!mc.precharge)
break;
type = is_target_pte_for_mc(vma, addr, ptent, &target);
switch (type) {
case MC_TARGET_PAGE:
page = target.page;
if (isolate_lru_page(page))
goto put;
pc = lookup_page_cgroup(page);
if (!mem_cgroup_move_account(page, 1, pc,
mc.from, mc.to, false)) {
mc.precharge--;
/* we uncharge from mc.from later. */
mc.moved_charge++;
}
putback_lru_page(page);
put: /* is_target_pte_for_mc() gets the page */
put_page(page);
break;
case MC_TARGET_SWAP:
ent = target.ent;
if (!mem_cgroup_move_swap_account(ent,
mc.from, mc.to, false)) {
mc.precharge--;
/* we fixup refcnts and charges later. */
mc.moved_swap++;
}
break;
default:
break;
}
}
pte_unmap_unlock(pte - 1, ptl);
cond_resched();
if (addr != end) {
/*
* We have consumed all precharges we got in can_attach().
* We try charge one by one, but don't do any additional
* charges to mc.to if we have failed in charge once in attach()
* phase.
*/
ret = mem_cgroup_do_precharge(1);
if (!ret)
goto retry;
}
return ret;
}
static void mem_cgroup_move_charge(struct mm_struct *mm)
{
struct vm_area_struct *vma;
lru_add_drain_all();
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
retry:
if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
/*
* Someone who are holding the mmap_sem might be waiting in
* waitq. So we cancel all extra charges, wake up all waiters,
* and retry. Because we cancel precharges, we might not be able
* to move enough charges, but moving charge is a best-effort
* feature anyway, so it wouldn't be a big problem.
*/
__mem_cgroup_clear_mc();
cond_resched();
goto retry;
}
for (vma = mm->mmap; vma; vma = vma->vm_next) {
int ret;
struct mm_walk mem_cgroup_move_charge_walk = {
.pmd_entry = mem_cgroup_move_charge_pte_range,
.mm = mm,
.private = vma,
};
if (is_vm_hugetlb_page(vma))
continue;
ret = walk_page_range(vma->vm_start, vma->vm_end,
&mem_cgroup_move_charge_walk);
if (ret)
/*
* means we have consumed all precharges and failed in
* doing additional charge. Just abandon here.
*/
break;
}
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
up_read(&mm->mmap_sem);
}
static void mem_cgroup_move_task(struct cgroup *cont,
struct cgroup_taskset *tset)
{
struct task_struct *p = cgroup_taskset_first(tset);
struct mm_struct *mm = get_task_mm(p);
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
if (mm) {
if (mc.to)
mem_cgroup_move_charge(mm);
put_swap_token(mm);
memcg: fix deadlock between cpuset and memcg Commit b1dd693e ("memcg: avoid deadlock between move charge and try_charge()") can cause another deadlock about mmap_sem on task migration if cpuset and memcg are mounted onto the same mount point. After the commit, cgroup_attach_task() has sequence like: cgroup_attach_task() ss->can_attach() cpuset_can_attach() mem_cgroup_can_attach() down_read(&mmap_sem) (1) ss->attach() cpuset_attach() mpol_rebind_mm() down_write(&mmap_sem) (2) up_write(&mmap_sem) cpuset_migrate_mm() do_migrate_pages() down_read(&mmap_sem) up_read(&mmap_sem) mem_cgroup_move_task() mem_cgroup_clear_mc() up_read(&mmap_sem) We can cause deadlock at (2) because we've already aquire the mmap_sem at (1). But the commit itself is necessary to fix deadlocks which have existed before the commit like: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() | -> move charge should wake it up Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() | -> move charge should wake it up This patch fixes all of these problems by: 1. revert the commit. 2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge() has released the mmap_sem. 3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel all extra charges, wake up all waiters, and retry trylock. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:47:41 +03:00
mmput(mm);
}
if (mc.to)
mem_cgroup_clear_mc();
}
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup *cgroup,
struct cgroup_taskset *tset)
{
return 0;
}
static void mem_cgroup_cancel_attach(struct cgroup *cgroup,
struct cgroup_taskset *tset)
{
}
static void mem_cgroup_move_task(struct cgroup *cont,
struct cgroup_taskset *tset)
{
}
#endif
struct cgroup_subsys mem_cgroup_subsys = {
.name = "memory",
.subsys_id = mem_cgroup_subsys_id,
.create = mem_cgroup_create,
.pre_destroy = mem_cgroup_pre_destroy,
.destroy = mem_cgroup_destroy,
.populate = mem_cgroup_populate,
.can_attach = mem_cgroup_can_attach,
.cancel_attach = mem_cgroup_cancel_attach,
.attach = mem_cgroup_move_task,
.early_init = 0,
.use_id = 1,
};
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
static int __init enable_swap_account(char *s)
{
/* consider enabled if no parameter or 1 is given */
if (!strcmp(s, "1"))
really_do_swap_account = 1;
else if (!strcmp(s, "0"))
really_do_swap_account = 0;
return 1;
}
__setup("swapaccount=", enable_swap_account);
#endif