iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
32aaeffbd4
linux/arch/powerpc/platforms/embedded6xx/Kconfig

122 lines
2.9 KiB
Plaintext
Raw Normal View History

[POWERPC] Move embedded6xx into multiplatform The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 03:11:24 +04:00
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based boards"
powerpc/kconfig: Kill PPC_MULTIPLATFORM CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-10 20:53:27 +03:00
depends on 6xx && BROKEN_ON_SMP
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 10:04:21 +04:00
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-02 00:53:48 +03:00
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
[POWERPC] Move embedded6xx into multiplatform The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 03:11:24 +04:00
depends on EMBEDDED6xx
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-02 00:53:48 +03:00
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
[POWERPC] PowerPC: select default image for Linkstation Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-23 01:52:02 +03:00
select DEFAULT_UIMAGE
[POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 21:42:50 +03:00
select MPC10X_OPENPIC
select MPC10X_BRIDGE
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-02 00:53:48 +03:00
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
KuroboxHG has been tested. In the future classical Kurobox,
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
[POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 21:42:50 +03:00
config STORCENTER
bool "IOMEGA StorCenter"
depends on EMBEDDED6xx
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select MPC10X_OPENPIC
select MPC10X_BRIDGE
help
Select STORCENTER if configuring for the iomega StorCenter
with an 8241 CPU in it.
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 11:07:15 +04:00
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
[POWERPC] Move embedded6xx into multiplatform The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 03:11:24 +04:00
depends on EMBEDDED6xx
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 11:07:15 +04:00
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
[POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 21:42:50 +03:00
select TSI108_BRIDGE
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 11:07:15 +04:00
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 01:28:38 +04:00
config PPC_HOLLY
bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
[POWERPC] Move embedded6xx into multiplatform The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 03:11:24 +04:00
depends on EMBEDDED6xx
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 01:28:38 +04:00
select TSI108_BRIDGE
select PPC_UDBG_16550
[POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 21:42:50 +03:00
select TSI108_BRIDGE
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 01:28:38 +04:00
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 04:58:43 +04:00
config PPC_PRPMC2800
bool "Motorola-PrPMC2800"
[POWERPC] Move embedded6xx into multiplatform The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 03:11:24 +04:00
depends on EMBEDDED6xx
[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 04:58:43 +04:00
select MV64X60
select NOT_COHERENT_CACHE
help
This option enables support for the Motorola PrPMC2800 board
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 10:04:21 +04:00
powerpc: Add C2K to configuration Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 5 of 5: add the Kconfig entry for the C2K board. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-16 04:26:02 +04:00
config PPC_C2K
bool "SBS/GEFanuc C2K board"
depends on EMBEDDED6xx
select MV64X60
select NOT_COHERENT_CACHE
select MTD_CFI_I4
help
This option enables support for the GE Fanuc C2K board (formerly
an SBS board).
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 11:07:15 +04:00
config TSI108_BRIDGE
bool
[POWERPC] disallow building powermac and tsi108 without PCI The TSI108 code and the 32 bit powermac and chrp platforms have dependency on PCI that is not easy or desirable to get rid of. The easiest fix is to always select CONFIG_PCI if one of those platforms is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-18 03:06:58 +04:00
select PCI
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 01:28:38 +04:00
select MPIC
select MPIC_WEIRD
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 11:07:15 +04:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 10:04:21 +04:00
config MPC10X_BRIDGE
bool
ppc: Use the indirect_pci.c from arch/powerpc/sysdev This defines a CONFIG_INDIRECT_PCI symbol to control whether it gets used or not, and fixes the Kconfig to select that symbol for platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 10:36:55 +04:00
select PPC_INDIRECT_PCI
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 10:04:21 +04:00
[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 04:55:53 +04:00
config MV64X60
bool
[POWERPC] Add Marvell mv64x60 PCI bridge support This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 04:57:12 +04:00
select PPC_INDIRECT_PCI
[POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-18 02:21:29 +04:00
select CHECK_CACHE_COHERENCY
[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 04:55:53 +04:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 10:04:21 +04:00
config MPC10X_OPENPIC
bool
powerpc: gamecube/wii: introduce GAMECUBE_COMMON Add a config option GAMECUBE_COMMON to be used as a dependency for all options common to the Nintendo GameCube and Wii video game consoles. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 09:31:37 +03:00
config GAMECUBE_COMMON
bool
powerpc: gamecube/wii: udbg support for usbgecko Add support for using the USB Gecko adapter via the udbg facility on the Nintendo GameCube and Wii video game consoles. The USB Gecko is a 3rd party memory card interface adapter that provides a EXI (External Interface) to USB serial converter. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 09:31:40 +03:00
config USBGECKO_UDBG
bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
depends on GAMECUBE_COMMON
help
If you say yes to this option, support will be included for the
USB Gecko adapter as an udbg console.
The USB Gecko is a EXI to USB Serial converter that can be plugged
into a memcard slot in the Nintendo GameCube/Wii.
This driver bypasses the EXI layer completely.
If in doubt, say N here.
powerpc: gamecube: platform support Add platform support for the Nintendo GameCube video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 09:31:42 +03:00
config GAMECUBE
bool "Nintendo-GameCube"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select GAMECUBE if configuring for the Nintendo GameCube.
More information at: <http://gc-linux.sourceforge.net/>
powerpc: wii: platform support Add platform support for the Nintendo Wii video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 09:31:48 +03:00
config WII
bool "Nintendo-Wii"
depends on EMBEDDED6xx
select GAMECUBE_COMMON
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>
Reference in New Issue Copy Permalink