linux/drivers/hid/hid-logitech-dj.c

1136 lines
36 KiB
C
Raw Normal View History

/*
* HID driver for Logitech Unifying receivers
*
* Copyright (c) 2011 Logitech
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/kfifo.h>
#include <asm/unaligned.h>
#include "hid-ids.h"
#define DJ_MAX_PAIRED_DEVICES 6
#define DJ_MAX_NUMBER_NOTIFICATIONS 8
#define DJ_RECEIVER_INDEX 0
#define DJ_DEVICE_INDEX_MIN 1
#define DJ_DEVICE_INDEX_MAX 6
#define DJREPORT_SHORT_LENGTH 15
#define DJREPORT_LONG_LENGTH 32
#define REPORT_ID_DJ_SHORT 0x20
#define REPORT_ID_DJ_LONG 0x21
#define REPORT_ID_HIDPP_SHORT 0x10
#define REPORT_ID_HIDPP_LONG 0x11
#define HIDPP_REPORT_SHORT_LENGTH 7
#define HIDPP_REPORT_LONG_LENGTH 20
#define HIDPP_RECEIVER_INDEX 0xff
#define REPORT_TYPE_RFREPORT_FIRST 0x01
#define REPORT_TYPE_RFREPORT_LAST 0x1F
/* Command Switch to DJ mode */
#define REPORT_TYPE_CMD_SWITCH 0x80
#define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01
#define TIMEOUT_NO_KEEPALIVE 0x00
/* Command to Get the list of Paired devices */
#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81
/* Device Paired Notification */
#define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41
#define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01
#define SPFUNCTION_DEVICE_LIST_EMPTY 0x02
#define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01
#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02
#define DEVICE_PAIRED_RF_REPORT_TYPE 0x03
/* Device Un-Paired Notification */
#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40
/* Connection Status Notification */
#define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42
#define CONNECTION_STATUS_PARAM_STATUS 0x00
#define STATUS_LINKLOSS 0x01
/* Error Notification */
#define REPORT_TYPE_NOTIF_ERROR 0x7F
#define NOTIF_ERROR_PARAM_ETYPE 0x00
#define ETYPE_KEEPALIVE_TIMEOUT 0x01
/* supported DJ HID && RF report types */
#define REPORT_TYPE_KEYBOARD 0x01
#define REPORT_TYPE_MOUSE 0x02
#define REPORT_TYPE_CONSUMER_CONTROL 0x03
#define REPORT_TYPE_SYSTEM_CONTROL 0x04
#define REPORT_TYPE_MEDIA_CENTER 0x08
#define REPORT_TYPE_LEDS 0x0E
/* RF Report types bitfield */
#define STD_KEYBOARD 0x00000002
#define STD_MOUSE 0x00000004
#define MULTIMEDIA 0x00000008
#define POWER_KEYS 0x00000010
#define MEDIA_CENTER 0x00000100
#define KBD_LEDS 0x00004000
struct dj_report {
u8 report_id;
u8 device_index;
u8 report_type;
u8 report_params[DJREPORT_SHORT_LENGTH - 3];
};
struct dj_receiver_dev {
struct hid_device *hdev;
struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES +
DJ_DEVICE_INDEX_MIN];
struct work_struct work;
struct kfifo notif_fifo;
spinlock_t lock;
bool querying_devices;
};
struct dj_device {
struct hid_device *hdev;
struct dj_receiver_dev *dj_receiver_dev;
u32 reports_supported;
u8 device_index;
};
/* Keyboard descriptor (1) */
static const char kbd_descriptor[] = {
0x05, 0x01, /* USAGE_PAGE (generic Desktop) */
0x09, 0x06, /* USAGE (Keyboard) */
0xA1, 0x01, /* COLLECTION (Application) */
0x85, 0x01, /* REPORT_ID (1) */
0x95, 0x08, /* REPORT_COUNT (8) */
0x75, 0x01, /* REPORT_SIZE (1) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x05, 0x07, /* USAGE_PAGE (Keyboard) */
0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */
0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */
0x81, 0x02, /* INPUT (Data,Var,Abs) */
0x95, 0x06, /* REPORT_COUNT (6) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */
0x05, 0x07, /* USAGE_PAGE (Keyboard) */
0x19, 0x00, /* USAGE_MINIMUM (no event) */
0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */
0x81, 0x00, /* INPUT (Data,Ary,Abs) */
0x85, 0x0e, /* REPORT_ID (14) */
0x05, 0x08, /* USAGE PAGE (LED page) */
0x95, 0x05, /* REPORT COUNT (5) */
0x75, 0x01, /* REPORT SIZE (1) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x19, 0x01, /* USAGE MINIMUM (1) */
0x29, 0x05, /* USAGE MAXIMUM (5) */
0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
0x95, 0x01, /* REPORT COUNT (1) */
0x75, 0x03, /* REPORT SIZE (3) */
0x91, 0x01, /* OUTPUT (Constant) */
0xC0
};
/* Mouse descriptor (2) */
static const char mse_descriptor[] = {
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
0x09, 0x02, /* USAGE (Mouse) */
0xA1, 0x01, /* COLLECTION (Application) */
0x85, 0x02, /* REPORT_ID = 2 */
0x09, 0x01, /* USAGE (pointer) */
0xA1, 0x00, /* COLLECTION (physical) */
0x05, 0x09, /* USAGE_PAGE (buttons) */
0x19, 0x01, /* USAGE_MIN (1) */
0x29, 0x10, /* USAGE_MAX (16) */
0x15, 0x00, /* LOGICAL_MIN (0) */
0x25, 0x01, /* LOGICAL_MAX (1) */
0x95, 0x10, /* REPORT_COUNT (16) */
0x75, 0x01, /* REPORT_SIZE (1) */
0x81, 0x02, /* INPUT (data var abs) */
0x05, 0x01, /* USAGE_PAGE (generic desktop) */
0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
0x75, 0x0C, /* REPORT_SIZE (12) */
0x95, 0x02, /* REPORT_COUNT (2) */
0x09, 0x30, /* USAGE (X) */
0x09, 0x31, /* USAGE (Y) */
0x81, 0x06, /* INPUT */
0x15, 0x81, /* LOGICAL_MIN (-127) */
0x25, 0x7F, /* LOGICAL_MAX (127) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, 0x01, /* REPORT_COUNT (1) */
0x09, 0x38, /* USAGE (wheel) */
0x81, 0x06, /* INPUT */
0x05, 0x0C, /* USAGE_PAGE(consumer) */
0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
0x95, 0x01, /* REPORT_COUNT (1) */
0x81, 0x06, /* INPUT */
0xC0, /* END_COLLECTION */
0xC0, /* END_COLLECTION */
};
/* Consumer Control descriptor (3) */
static const char consumer_descriptor[] = {
0x05, 0x0C, /* USAGE_PAGE (Consumer Devices) */
0x09, 0x01, /* USAGE (Consumer Control) */
0xA1, 0x01, /* COLLECTION (Application) */
0x85, 0x03, /* REPORT_ID = 3 */
0x75, 0x10, /* REPORT_SIZE (16) */
0x95, 0x02, /* REPORT_COUNT (2) */
0x15, 0x01, /* LOGICAL_MIN (1) */
0x26, 0x8C, 0x02, /* LOGICAL_MAX (652) */
0x19, 0x01, /* USAGE_MIN (1) */
0x2A, 0x8C, 0x02, /* USAGE_MAX (652) */
0x81, 0x00, /* INPUT (Data Ary Abs) */
0xC0, /* END_COLLECTION */
}; /* */
/* System control descriptor (4) */
static const char syscontrol_descriptor[] = {
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
0x09, 0x80, /* USAGE (System Control) */
0xA1, 0x01, /* COLLECTION (Application) */
0x85, 0x04, /* REPORT_ID = 4 */
0x75, 0x02, /* REPORT_SIZE (2) */
0x95, 0x01, /* REPORT_COUNT (1) */
0x15, 0x01, /* LOGICAL_MIN (1) */
0x25, 0x03, /* LOGICAL_MAX (3) */
0x09, 0x82, /* USAGE (System Sleep) */
0x09, 0x81, /* USAGE (System Power Down) */
0x09, 0x83, /* USAGE (System Wake Up) */
0x81, 0x60, /* INPUT (Data Ary Abs NPrf Null) */
0x75, 0x06, /* REPORT_SIZE (6) */
0x81, 0x03, /* INPUT (Cnst Var Abs) */
0xC0, /* END_COLLECTION */
};
/* Media descriptor (8) */
static const char media_descriptor[] = {
0x06, 0xbc, 0xff, /* Usage Page 0xffbc */
0x09, 0x88, /* Usage 0x0088 */
0xa1, 0x01, /* BeginCollection */
0x85, 0x08, /* Report ID 8 */
0x19, 0x01, /* Usage Min 0x0001 */
0x29, 0xff, /* Usage Max 0x00ff */
0x15, 0x01, /* Logical Min 1 */
0x26, 0xff, 0x00, /* Logical Max 255 */
0x75, 0x08, /* Report Size 8 */
0x95, 0x01, /* Report Count 1 */
0x81, 0x00, /* Input */
0xc0, /* EndCollection */
}; /* */
/* HIDPP descriptor */
static const char hidpp_descriptor[] = {
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
0x09, 0x01, /* Usage (Vendor Usage 1) */
0xa1, 0x01, /* Collection (Application) */
0x85, 0x10, /* Report ID (16) */
0x75, 0x08, /* Report Size (8) */
0x95, 0x06, /* Report Count (6) */
0x15, 0x00, /* Logical Minimum (0) */
0x26, 0xff, 0x00, /* Logical Maximum (255) */
0x09, 0x01, /* Usage (Vendor Usage 1) */
0x81, 0x00, /* Input (Data,Arr,Abs) */
0x09, 0x01, /* Usage (Vendor Usage 1) */
0x91, 0x00, /* Output (Data,Arr,Abs) */
0xc0, /* End Collection */
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
0x09, 0x02, /* Usage (Vendor Usage 2) */
0xa1, 0x01, /* Collection (Application) */
0x85, 0x11, /* Report ID (17) */
0x75, 0x08, /* Report Size (8) */
0x95, 0x13, /* Report Count (19) */
0x15, 0x00, /* Logical Minimum (0) */
0x26, 0xff, 0x00, /* Logical Maximum (255) */
0x09, 0x02, /* Usage (Vendor Usage 2) */
0x81, 0x00, /* Input (Data,Arr,Abs) */
0x09, 0x02, /* Usage (Vendor Usage 2) */
0x91, 0x00, /* Output (Data,Arr,Abs) */
0xc0, /* End Collection */
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
0x09, 0x04, /* Usage (Vendor Usage 0x04) */
0xa1, 0x01, /* Collection (Application) */
0x85, 0x20, /* Report ID (32) */
0x75, 0x08, /* Report Size (8) */
0x95, 0x0e, /* Report Count (14) */
0x15, 0x00, /* Logical Minimum (0) */
0x26, 0xff, 0x00, /* Logical Maximum (255) */
0x09, 0x41, /* Usage (Vendor Usage 0x41) */
0x81, 0x00, /* Input (Data,Arr,Abs) */
0x09, 0x41, /* Usage (Vendor Usage 0x41) */
0x91, 0x00, /* Output (Data,Arr,Abs) */
0x85, 0x21, /* Report ID (33) */
0x95, 0x1f, /* Report Count (31) */
0x15, 0x00, /* Logical Minimum (0) */
0x26, 0xff, 0x00, /* Logical Maximum (255) */
0x09, 0x42, /* Usage (Vendor Usage 0x42) */
0x81, 0x00, /* Input (Data,Arr,Abs) */
0x09, 0x42, /* Usage (Vendor Usage 0x42) */
0x91, 0x00, /* Output (Data,Arr,Abs) */
0xc0, /* End Collection */
};
/* Maximum size of all defined hid reports in bytes (including report id) */
#define MAX_REPORT_SIZE 8
/* Make sure all descriptors are present here */
#define MAX_RDESC_SIZE \
(sizeof(kbd_descriptor) + \
sizeof(mse_descriptor) + \
sizeof(consumer_descriptor) + \
sizeof(syscontrol_descriptor) + \
sizeof(media_descriptor) + \
sizeof(hidpp_descriptor))
/* Number of possible hid report types that can be created by this driver.
*
* Right now, RF report types have the same report types (or report id's)
* than the hid report created from those RF reports. In the future
* this doesnt have to be true.
*
* For instance, RF report type 0x01 which has a size of 8 bytes, corresponds
* to hid report id 0x01, this is standard keyboard. Same thing applies to mice
* reports and consumer control, etc. If a new RF report is created, it doesn't
* has to have the same report id as its corresponding hid report, so an
* translation may have to take place for future report types.
*/
#define NUMBER_OF_HID_REPORTS 32
static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {
[1] = 8, /* Standard keyboard */
[2] = 8, /* Standard mouse */
[3] = 5, /* Consumer control */
[4] = 2, /* System control */
[8] = 2, /* Media Center */
};
#define LOGITECH_DJ_INTERFACE_NUMBER 0x02
static struct hid_ll_driver logi_dj_ll_driver;
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
/* Called in delayed work context */
struct dj_device *dj_dev;
unsigned long flags;
spin_lock_irqsave(&djrcv_dev->lock, flags);
dj_dev = djrcv_dev->paired_dj_devices[dj_report->device_index];
djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL;
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
if (dj_dev != NULL) {
hid_destroy_device(dj_dev->hdev);
kfree(dj_dev);
} else {
dev_err(&djrcv_dev->hdev->dev, "%s: can't destroy a NULL device\n",
__func__);
}
}
static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
/* Called in delayed work context */
struct hid_device *djrcv_hdev = djrcv_dev->hdev;
struct usb_interface *intf = to_usb_interface(djrcv_hdev->dev.parent);
struct usb_device *usbdev = interface_to_usbdev(intf);
struct hid_device *dj_hiddev;
struct dj_device *dj_dev;
/* Device index goes from 1 to 6, we need 3 bytes to store the
* semicolon, the index, and a null terminator
*/
unsigned char tmpstr[3];
if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] &
SPFUNCTION_DEVICE_LIST_EMPTY) {
dbg_hid("%s: device list is empty\n", __func__);
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
djrcv_dev->querying_devices = false;
return;
}
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
if (djrcv_dev->paired_dj_devices[dj_report->device_index]) {
/* The device is already known. No need to reallocate it. */
dbg_hid("%s: device is already known\n", __func__);
return;
}
dj_hiddev = hid_allocate_device();
if (IS_ERR(dj_hiddev)) {
dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n",
__func__);
return;
}
dj_hiddev->ll_driver = &logi_dj_ll_driver;
dj_hiddev->dev.parent = &djrcv_hdev->dev;
dj_hiddev->bus = BUS_USB;
dj_hiddev->vendor = le16_to_cpu(usbdev->descriptor.idVendor);
dj_hiddev->product =
(dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB]
<< 8) |
dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB];
snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
"Logitech Unifying Device. Wireless PID:%04x",
dj_hiddev->product);
dj_hiddev->group = HID_GROUP_LOGITECH_DJ_DEVICE;
usb_make_path(usbdev, dj_hiddev->phys, sizeof(dj_hiddev->phys));
snprintf(tmpstr, sizeof(tmpstr), ":%d", dj_report->device_index);
strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys));
dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL);
if (!dj_dev) {
dev_err(&djrcv_hdev->dev, "%s: failed allocating dj_device\n",
__func__);
goto dj_device_allocate_fail;
}
dj_dev->reports_supported = get_unaligned_le32(
dj_report->report_params + DEVICE_PAIRED_RF_REPORT_TYPE);
dj_dev->hdev = dj_hiddev;
dj_dev->dj_receiver_dev = djrcv_dev;
dj_dev->device_index = dj_report->device_index;
dj_hiddev->driver_data = dj_dev;
djrcv_dev->paired_dj_devices[dj_report->device_index] = dj_dev;
if (hid_add_device(dj_hiddev)) {
dev_err(&djrcv_hdev->dev, "%s: failed adding dj_device\n",
__func__);
goto hid_add_device_fail;
}
return;
hid_add_device_fail:
djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL;
kfree(dj_dev);
dj_device_allocate_fail:
hid_destroy_device(dj_hiddev);
}
static void delayedwork_callback(struct work_struct *work)
{
struct dj_receiver_dev *djrcv_dev =
container_of(work, struct dj_receiver_dev, work);
struct dj_report dj_report;
unsigned long flags;
int count;
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
int retval;
dbg_hid("%s\n", __func__);
spin_lock_irqsave(&djrcv_dev->lock, flags);
count = kfifo_out(&djrcv_dev->notif_fifo, &dj_report,
sizeof(struct dj_report));
if (count != sizeof(struct dj_report)) {
dev_err(&djrcv_dev->hdev->dev, "%s: workitem triggered without "
"notifications available\n", __func__);
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
return;
}
if (!kfifo_is_empty(&djrcv_dev->notif_fifo)) {
if (schedule_work(&djrcv_dev->work) == 0) {
dbg_hid("%s: did not schedule the work item, was "
"already queued\n", __func__);
}
}
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
switch (dj_report.report_type) {
case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
logi_dj_recv_add_djhid_device(djrcv_dev, &dj_report);
break;
case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report);
break;
default:
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
/* A normal report (i. e. not belonging to a pair/unpair notification)
* arriving here, means that the report arrived but we did not have a
* paired dj_device associated to the report's device_index, this
* means that the original "device paired" notification corresponding
* to this dj_device never arrived to this driver. The reason is that
* hid-core discards all packets coming from a device while probe() is
* executing. */
if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) {
/* ok, we don't know the device, just re-ask the
* receiver for the list of connected devices. */
retval = logi_dj_recv_query_paired_devices(djrcv_dev);
if (!retval) {
/* everything went fine, so just leave */
break;
}
dev_err(&djrcv_dev->hdev->dev,
"%s:logi_dj_recv_query_paired_devices "
"error:%d\n", __func__, retval);
}
dbg_hid("%s: unexpected report type\n", __func__);
}
}
static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
/* We are called from atomic context (tasklet && djrcv->lock held) */
kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
if (schedule_work(&djrcv_dev->work) == 0) {
dbg_hid("%s: did not schedule the work item, was already "
"queued\n", __func__);
}
}
static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
/* We are called from atomic context (tasklet && djrcv->lock held) */
unsigned int i;
u8 reportbuffer[MAX_REPORT_SIZE];
struct dj_device *djdev;
djdev = djrcv_dev->paired_dj_devices[dj_report->device_index];
memset(reportbuffer, 0, sizeof(reportbuffer));
for (i = 0; i < NUMBER_OF_HID_REPORTS; i++) {
if (djdev->reports_supported & (1 << i)) {
reportbuffer[0] = i;
if (hid_input_report(djdev->hdev,
HID_INPUT_REPORT,
reportbuffer,
hid_reportid_size_map[i], 1)) {
dbg_hid("hid_input_report error sending null "
"report\n");
}
}
}
}
static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
/* We are called from atomic context (tasklet && djrcv->lock held) */
struct dj_device *dj_device;
dj_device = djrcv_dev->paired_dj_devices[dj_report->device_index];
if ((dj_report->report_type > ARRAY_SIZE(hid_reportid_size_map) - 1) ||
(hid_reportid_size_map[dj_report->report_type] == 0)) {
dbg_hid("invalid report type:%x\n", dj_report->report_type);
return;
}
if (hid_input_report(dj_device->hdev,
HID_INPUT_REPORT, &dj_report->report_type,
hid_reportid_size_map[dj_report->report_type], 1)) {
dbg_hid("hid_input_report error\n");
}
}
static void logi_dj_recv_forward_hidpp(struct dj_device *dj_dev, u8 *data,
int size)
{
/* We are called from atomic context (tasklet && djrcv->lock held) */
if (hid_input_report(dj_dev->hdev, HID_INPUT_REPORT, data, size, 1))
dbg_hid("hid_input_report error\n");
}
static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
{
struct hid_device *hdev = djrcv_dev->hdev;
struct hid_report *report;
struct hid_report_enum *output_report_enum;
u8 *data = (u8 *)(&dj_report->device_index);
unsigned int i;
output_report_enum = &hdev->report_enum[HID_OUTPUT_REPORT];
report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
if (!report) {
dev_err(&hdev->dev, "%s: unable to find dj report\n", __func__);
return -ENODEV;
}
for (i = 0; i < DJREPORT_SHORT_LENGTH - 1; i++)
report->field[0]->value[i] = data[i];
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
return 0;
}
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
struct dj_report *dj_report;
int retval;
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
/* no need to protect djrcv_dev->querying_devices */
if (djrcv_dev->querying_devices)
return 0;
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
dj_report->device_index = 0xFF;
dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
kfree(dj_report);
return retval;
}
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887. This patch re-adds the workaround introduced by 596264082f10dd4 which was reverted by 8af6c08830b1ae114. The original patch 596264 was needed to overcome a situation where the hid-core would drop incoming reports while probe() was being executed. This issue was solved by c849a6143bec520af which added hid_device_io_start() and hid_device_io_stop() that enable a specific hid driver to opt-in for input reports while its probe() is being executed. Commit a9dd22b730857347 modified hid-logitech-dj so as to use the functionality added to hid-core. Having done that, workaround 596264 was no longer necessary and was reverted by 8af6c08. We now encounter a different problem that ends up 'again' thwarting the Unifying receiver enumeration. The problem is time and usb controller dependent. Ocasionally the reports sent to the usb receiver to start the paired devices enumeration fail with -EPIPE and the receiver never gets to enumerate the paired devices. With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb driver became asynchronous and none was catching the error from the failing URB. As the root cause for this failing SET_REPORT is not understood yet, -possibly a race on the usb controller drivers or a problem with the Unifying receiver- reintroducing this workaround solves the problem. Overall what this workaround does is: If an input report from an unknown device is received, then a (re)enumeration is performed. related bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649 Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-18 17:21:30 +04:00
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
struct dj_report *dj_report;
int retval;
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
dj_report->device_index = 0xFF;
dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
kfree(dj_report);
HID: logitech-dj: Fix USB 3.0 issue This fix (not very clean though) should fix the long time USB3 issue that was spotted last year. The rational has been given by Hans de Goede: ---- I think the most likely cause for this is a firmware bug in the unifying receiver, likely a race condition. The most prominent difference between having a USB-2 device plugged into an EHCI (so USB-2 only) port versus an XHCI port will be inter packet timing. Specifically if you send packets (ie hid reports) one at a time, then with the EHCI controller their will be a significant pause between them, where with XHCI they will be very close together in time. The reason for this is the difference in EHCI / XHCI controller OS <-> driver interfaces. For non periodic endpoints (control, bulk) the EHCI uses a circular linked-list of commands in dma-memory, which it follows to execute commands, if the list is empty, it will go into an idle state and re-check periodically. The XHCI uses a ring of commands per endpoint, and if the OS places anything new on the ring it will do an ioport write, waking up the XHCI making it send the new packet immediately. For periodic transfers (isoc, interrupt) the delay between packets when sending one at a time (rather then queuing them up) will be even larger, because they need to be inserted into the EHCI schedule 2 ms in the future so the OS driver can be sure that the EHCI driver does not try to start executing the time slot in question before the insertion has completed. So a possible fix may be to insert a delay between packets being send to the receiver. ---- I tested this on a buggy Haswell USB 3.0 motherboard, and I always get the notification after adding the msleep. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-09 02:18:45 +04:00
/*
* Ugly sleep to work around a USB 3.0 bug when the receiver is still
* processing the "switch-to-dj" command while we send an other command.
* 50 msec should gives enough time to the receiver to be ready.
*/
msleep(50);
return retval;
}
static int logi_dj_ll_open(struct hid_device *hid)
{
dbg_hid("%s:%s\n", __func__, hid->phys);
return 0;
}
static void logi_dj_ll_close(struct hid_device *hid)
{
dbg_hid("%s:%s\n", __func__, hid->phys);
}
static u8 unifying_name_query[] = {0x10, 0xff, 0x83, 0xb5, 0x40, 0x00, 0x00};
static u8 unifying_name_answer[] = {0x11, 0xff, 0x83, 0xb5};
static int logi_dj_ll_raw_request(struct hid_device *hid,
unsigned char reportnum, __u8 *buf,
size_t count, unsigned char report_type,
int reqtype)
{
struct dj_device *djdev = hid->driver_data;
struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
u8 *out_buf;
int ret;
if ((buf[0] == REPORT_ID_HIDPP_SHORT) ||
(buf[0] == REPORT_ID_HIDPP_LONG)) {
if (count < 2)
return -EINVAL;
/* special case where we should not overwrite
* the device_index */
if (count == 7 && !memcmp(buf, unifying_name_query,
sizeof(unifying_name_query)))
buf[4] |= djdev->device_index - 1;
else
buf[1] = djdev->device_index;
return hid_hw_raw_request(djrcv_dev->hdev, reportnum, buf,
count, report_type, reqtype);
}
if (buf[0] != REPORT_TYPE_LEDS)
return -EINVAL;
out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
if (!out_buf)
return -ENOMEM;
if (count > DJREPORT_SHORT_LENGTH - 2)
count = DJREPORT_SHORT_LENGTH - 2;
out_buf[0] = REPORT_ID_DJ_SHORT;
out_buf[1] = djdev->device_index;
memcpy(out_buf + 2, buf, count);
ret = hid_hw_raw_request(djrcv_dev->hdev, out_buf[0], out_buf,
DJREPORT_SHORT_LENGTH, report_type, reqtype);
kfree(out_buf);
return ret;
}
static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
{
memcpy(rdesc + *rsize, data, size);
*rsize += size;
}
static int logi_dj_ll_parse(struct hid_device *hid)
{
struct dj_device *djdev = hid->driver_data;
unsigned int rsize = 0;
char *rdesc;
int retval;
dbg_hid("%s\n", __func__);
djdev->hdev->version = 0x0111;
djdev->hdev->country = 0x00;
rdesc = kmalloc(MAX_RDESC_SIZE, GFP_KERNEL);
if (!rdesc)
return -ENOMEM;
if (djdev->reports_supported & STD_KEYBOARD) {
dbg_hid("%s: sending a kbd descriptor, reports_supported: %x\n",
__func__, djdev->reports_supported);
rdcat(rdesc, &rsize, kbd_descriptor, sizeof(kbd_descriptor));
}
if (djdev->reports_supported & STD_MOUSE) {
dbg_hid("%s: sending a mouse descriptor, reports_supported: "
"%x\n", __func__, djdev->reports_supported);
rdcat(rdesc, &rsize, mse_descriptor, sizeof(mse_descriptor));
}
if (djdev->reports_supported & MULTIMEDIA) {
dbg_hid("%s: sending a multimedia report descriptor: %x\n",
__func__, djdev->reports_supported);
rdcat(rdesc, &rsize, consumer_descriptor, sizeof(consumer_descriptor));
}
if (djdev->reports_supported & POWER_KEYS) {
dbg_hid("%s: sending a power keys report descriptor: %x\n",
__func__, djdev->reports_supported);
rdcat(rdesc, &rsize, syscontrol_descriptor, sizeof(syscontrol_descriptor));
}
if (djdev->reports_supported & MEDIA_CENTER) {
dbg_hid("%s: sending a media center report descriptor: %x\n",
__func__, djdev->reports_supported);
rdcat(rdesc, &rsize, media_descriptor, sizeof(media_descriptor));
}
if (djdev->reports_supported & KBD_LEDS) {
dbg_hid("%s: need to send kbd leds report descriptor: %x\n",
__func__, djdev->reports_supported);
}
rdcat(rdesc, &rsize, hidpp_descriptor, sizeof(hidpp_descriptor));
retval = hid_parse_report(hid, rdesc, rsize);
kfree(rdesc);
return retval;
}
static int logi_dj_ll_start(struct hid_device *hid)
{
dbg_hid("%s\n", __func__);
return 0;
}
static void logi_dj_ll_stop(struct hid_device *hid)
{
dbg_hid("%s\n", __func__);
}
static struct hid_ll_driver logi_dj_ll_driver = {
.parse = logi_dj_ll_parse,
.start = logi_dj_ll_start,
.stop = logi_dj_ll_stop,
.open = logi_dj_ll_open,
.close = logi_dj_ll_close,
.raw_request = logi_dj_ll_raw_request,
};
static int logi_dj_dj_event(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
{
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
struct dj_report *dj_report = (struct dj_report *) data;
unsigned long flags;
/*
* Here we receive all data coming from iface 2, there are 3 cases:
*
* 1) Data is intended for this driver i. e. data contains arrival,
* departure, etc notifications, in which case we queue them for delayed
* processing by the work queue. We return 1 to hid-core as no further
* processing is required from it.
*
* 2) Data informs a connection change, if the change means rf link
* loss, then we must send a null report to the upper layer to discard
* potentially pressed keys that may be repeated forever by the input
* layer. Return 1 to hid-core as no further processing is required.
*
* 3) Data is an actual input event from a paired DJ device in which
* case we forward it to the correct hid device (via hid_input_report()
* ) and return 1 so hid-core does not anything else with it.
*/
if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
(dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
/*
* Device index is wrong, bail out.
* This driver can ignore safely the receiver notifications,
* so ignore those reports too.
*/
if (dj_report->device_index != DJ_RECEIVER_INDEX)
dev_err(&hdev->dev, "%s: invalid device index:%d\n",
__func__, dj_report->device_index);
return false;
}
spin_lock_irqsave(&djrcv_dev->lock, flags);
if (!djrcv_dev->paired_dj_devices[dj_report->device_index]) {
/* received an event for an unknown device, bail out */
logi_dj_recv_queue_notification(djrcv_dev, dj_report);
goto out;
}
switch (dj_report->report_type) {
case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
/* pairing notifications are handled above the switch */
break;
case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
logi_dj_recv_queue_notification(djrcv_dev, dj_report);
break;
case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
STATUS_LINKLOSS) {
logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
}
break;
default:
logi_dj_recv_forward_report(djrcv_dev, dj_report);
}
out:
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
return true;
}
static int logi_dj_hidpp_event(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
{
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
struct dj_report *dj_report = (struct dj_report *) data;
unsigned long flags;
u8 device_index = dj_report->device_index;
if (device_index == HIDPP_RECEIVER_INDEX) {
/* special case were the device wants to know its unifying
* name */
if (size == HIDPP_REPORT_LONG_LENGTH &&
!memcmp(data, unifying_name_answer,
sizeof(unifying_name_answer)) &&
((data[4] & 0xF0) == 0x40))
device_index = (data[4] & 0x0F) + 1;
else
return false;
}
/*
* Data is from the HID++ collection, in this case, we forward the
* data to the corresponding child dj device and return 0 to hid-core
* so he data also goes to the hidraw device of the receiver. This
* allows a user space application to implement the full HID++ routing
* via the receiver.
*/
if ((device_index < DJ_DEVICE_INDEX_MIN) ||
(device_index > DJ_DEVICE_INDEX_MAX)) {
/*
* Device index is wrong, bail out.
* This driver can ignore safely the receiver notifications,
* so ignore those reports too.
*/
dev_err(&hdev->dev, "%s: invalid device index:%d\n",
__func__, dj_report->device_index);
return false;
}
spin_lock_irqsave(&djrcv_dev->lock, flags);
if (!djrcv_dev->paired_dj_devices[device_index])
/* received an event for an unknown device, bail out */
goto out;
logi_dj_recv_forward_hidpp(djrcv_dev->paired_dj_devices[device_index],
data, size);
out:
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
return false;
}
static int logi_dj_raw_event(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
{
dbg_hid("%s, size:%d\n", __func__, size);
switch (data[0]) {
case REPORT_ID_DJ_SHORT:
return logi_dj_dj_event(hdev, report, data, size);
case REPORT_ID_HIDPP_SHORT:
/* intentional fallthrough */
case REPORT_ID_HIDPP_LONG:
return logi_dj_hidpp_event(hdev, report, data, size);
}
return false;
}
static int logi_dj_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct dj_receiver_dev *djrcv_dev;
int retval;
dbg_hid("%s called for ifnum %d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
/* Ignore interfaces 0 and 1, they will not carry any data, dont create
* any hid_device for them */
if (intf->cur_altsetting->desc.bInterfaceNumber !=
LOGITECH_DJ_INTERFACE_NUMBER) {
dbg_hid("%s: ignoring ifnum %d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
return -ENODEV;
}
/* Treat interface 2 */
djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL);
if (!djrcv_dev) {
dev_err(&hdev->dev,
"%s:failed allocating dj_receiver_dev\n", __func__);
return -ENOMEM;
}
djrcv_dev->hdev = hdev;
INIT_WORK(&djrcv_dev->work, delayedwork_callback);
spin_lock_init(&djrcv_dev->lock);
if (kfifo_alloc(&djrcv_dev->notif_fifo,
DJ_MAX_NUMBER_NOTIFICATIONS * sizeof(struct dj_report),
GFP_KERNEL)) {
dev_err(&hdev->dev,
"%s:failed allocating notif_fifo\n", __func__);
kfree(djrcv_dev);
return -ENOMEM;
}
hid_set_drvdata(hdev, djrcv_dev);
/* Call to usbhid to fetch the HID descriptors of interface 2 and
* subsequently call to the hid/hid-core to parse the fetched
* descriptors, this will in turn create the hidraw and hiddev nodes
* for interface 2 of the receiver */
retval = hid_parse(hdev);
if (retval) {
dev_err(&hdev->dev,
"%s:parse of interface 2 failed\n", __func__);
goto hid_parse_fail;
}
if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, REPORT_ID_DJ_SHORT,
0, DJREPORT_SHORT_LENGTH - 1)) {
retval = -ENODEV;
goto hid_parse_fail;
}
/* Starts the usb device and connects to upper interfaces hiddev and
* hidraw */
retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (retval) {
dev_err(&hdev->dev,
"%s:hid_hw_start returned error\n", __func__);
goto hid_hw_start_fail;
}
retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
if (retval < 0) {
dev_err(&hdev->dev,
"%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n",
__func__, retval);
goto switch_to_dj_mode_fail;
}
/* This is enabling the polling urb on the IN endpoint */
retval = hid_hw_open(hdev);
if (retval < 0) {
dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
__func__, retval);
goto llopen_failed;
}
/* Allow incoming packets to arrive: */
hid_device_io_start(hdev);
retval = logi_dj_recv_query_paired_devices(djrcv_dev);
if (retval < 0) {
dev_err(&hdev->dev, "%s:logi_dj_recv_query_paired_devices "
"error:%d\n", __func__, retval);
goto logi_dj_recv_query_paired_devices_failed;
}
return retval;
logi_dj_recv_query_paired_devices_failed:
hid_hw_close(hdev);
llopen_failed:
switch_to_dj_mode_fail:
hid_hw_stop(hdev);
hid_hw_start_fail:
hid_parse_fail:
kfifo_free(&djrcv_dev->notif_fifo);
kfree(djrcv_dev);
hid_set_drvdata(hdev, NULL);
return retval;
}
#ifdef CONFIG_PM
static int logi_dj_reset_resume(struct hid_device *hdev)
{
int retval;
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
if (retval < 0) {
dev_err(&hdev->dev,
"%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n",
__func__, retval);
}
return 0;
}
#endif
static void logi_dj_remove(struct hid_device *hdev)
{
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
struct dj_device *dj_dev;
int i;
dbg_hid("%s\n", __func__);
cancel_work_sync(&djrcv_dev->work);
hid_hw_close(hdev);
hid_hw_stop(hdev);
/* I suppose that at this point the only context that can access
* the djrecv_data is this thread as the work item is guaranteed to
* have finished and no more raw_event callbacks should arrive after
* the remove callback was triggered so no locks are put around the
* code below */
for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) {
dj_dev = djrcv_dev->paired_dj_devices[i];
if (dj_dev != NULL) {
hid_destroy_device(dj_dev->hdev);
kfree(dj_dev);
djrcv_dev->paired_dj_devices[i] = NULL;
}
}
kfifo_free(&djrcv_dev->notif_fifo);
kfree(djrcv_dev);
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id logi_dj_receivers[] = {
{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)},
{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)},
{}
};
MODULE_DEVICE_TABLE(hid, logi_dj_receivers);
static struct hid_driver logi_djreceiver_driver = {
.name = "logitech-djreceiver",
.id_table = logi_dj_receivers,
.probe = logi_dj_probe,
.remove = logi_dj_remove,
.raw_event = logi_dj_raw_event,
#ifdef CONFIG_PM
.reset_resume = logi_dj_reset_resume,
#endif
};
module_hid_driver(logi_djreceiver_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Logitech");
MODULE_AUTHOR("Nestor Lopez Casado");
MODULE_AUTHOR("nlopezcasad@logitech.com");