2007-05-11 20:49:56 +01:00
/*
* arch / arm / mach - at91 / at91sam9rl . c
*
* Copyright ( C ) 2005 SAN People
* Copyright ( C ) 2007 Atmel Corporation
*
* This file is subject to the terms and conditions of the GNU General Public
* License . See the file COPYING in the main directory of this archive for
* more details .
*/
# include <linux/module.h>
2013-10-11 09:37:45 +02:00
# include <linux/clk/at91_pmc.h>
2007-05-11 20:49:56 +01:00
2011-08-02 10:21:36 -04:00
# include <asm/proc-fns.h>
[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c
arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB'
arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function)
arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function)
arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction'
arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function)
arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function)
...
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 10:01:47 +00:00
# include <asm/irq.h>
2007-05-11 20:49:56 +01:00
# include <asm/mach/arch.h>
# include <asm/mach/map.h>
2012-03-28 18:30:01 +01:00
# include <asm/system_misc.h>
2008-08-05 16:14:15 +01:00
# include <mach/cpu.h>
2011-04-23 22:12:57 +08:00
# include <mach/at91_dbgu.h>
2008-08-05 16:14:15 +01:00
# include <mach/at91sam9rl.h>
2013-11-14 10:49:19 +01:00
# include <mach/hardware.h>
2007-05-11 20:49:56 +01:00
2012-10-30 06:41:28 +08:00
# include "at91_aic.h"
2012-10-30 08:11:24 +08:00
# include "at91_rstc.h"
2011-04-23 15:28:34 +08:00
# include "soc.h"
2007-05-11 20:49:56 +01:00
# include "generic.h"
2011-10-14 01:37:09 +08:00
# include "sam9_smc.h"
2013-09-22 22:29:57 +02:00
# include "pm.h"
2007-05-11 20:49:56 +01:00
/* --------------------------------------------------------------------
* Clocks
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2014-03-12 10:43:42 +01:00
# if defined(CONFIG_OLD_CLK_AT91)
# include "clock.h"
2007-05-11 20:49:56 +01:00
/*
* The peripheral clocks .
*/
static struct clk pioA_clk = {
. name = " pioA_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_PIOA ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk pioB_clk = {
. name = " pioB_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_PIOB ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk pioC_clk = {
. name = " pioC_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_PIOC ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk pioD_clk = {
. name = " pioD_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_PIOD ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk usart0_clk = {
. name = " usart0_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_US0 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk usart1_clk = {
. name = " usart1_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_US1 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk usart2_clk = {
. name = " usart2_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_US2 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk usart3_clk = {
. name = " usart3_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_US3 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk mmc_clk = {
. name = " mci_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_MCI ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk twi0_clk = {
. name = " twi0_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TWI0 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk twi1_clk = {
. name = " twi1_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TWI1 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk spi_clk = {
. name = " spi_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_SPI ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk ssc0_clk = {
. name = " ssc0_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_SSC0 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk ssc1_clk = {
. name = " ssc1_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_SSC1 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk tc0_clk = {
. name = " tc0_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TC0 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk tc1_clk = {
. name = " tc1_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TC1 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk tc2_clk = {
. name = " tc2_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TC2 ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
2008-09-18 19:42:37 +01:00
static struct clk pwm_clk = {
. name = " pwm_clk " ,
2007-05-11 20:49:56 +01:00
. pmc_mask = 1 < < AT91SAM9RL_ID_PWMC ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk tsc_clk = {
. name = " tsc_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_TSC ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk dma_clk = {
. name = " dma_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_DMA ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk udphs_clk = {
. name = " udphs_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_UDPHS ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk lcdc_clk = {
. name = " lcdc_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_LCDC ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
static struct clk ac97_clk = {
. name = " ac97_clk " ,
. pmc_mask = 1 < < AT91SAM9RL_ID_AC97C ,
. type = CLK_TYPE_PERIPHERAL ,
} ;
2014-04-15 12:28:03 +02:00
static struct clk adc_op_clk = {
. name = " adc_op_clk " ,
. type = CLK_TYPE_PERIPHERAL ,
. rate_hz = 1000000 ,
} ;
2007-05-11 20:49:56 +01:00
static struct clk * periph_clocks [ ] __initdata = {
& pioA_clk ,
& pioB_clk ,
& pioC_clk ,
& pioD_clk ,
& usart0_clk ,
& usart1_clk ,
& usart2_clk ,
& usart3_clk ,
& mmc_clk ,
& twi0_clk ,
& twi1_clk ,
& spi_clk ,
& ssc0_clk ,
& ssc1_clk ,
& tc0_clk ,
& tc1_clk ,
& tc2_clk ,
2008-09-18 19:42:37 +01:00
& pwm_clk ,
2007-05-11 20:49:56 +01:00
& tsc_clk ,
& dma_clk ,
& udphs_clk ,
& lcdc_clk ,
& ac97_clk ,
2014-04-15 12:28:03 +02:00
& adc_op_clk ,
2007-05-11 20:49:56 +01:00
// irq0
} ;
2011-02-02 07:27:07 +01:00
static struct clk_lookup periph_clocks_lookups [ ] = {
2013-02-07 16:31:58 +01:00
CLKDEV_CON_DEV_ID ( " hclk " , " at91sam9rl-lcdfb.0 " , & lcdc_clk ) ,
2011-06-21 14:24:33 +08:00
CLKDEV_CON_DEV_ID ( " hclk " , " atmel_usba_udc " , & utmi_clk ) ,
CLKDEV_CON_DEV_ID ( " pclk " , " atmel_usba_udc " , & udphs_clk ) ,
2011-02-02 07:27:07 +01:00
CLKDEV_CON_DEV_ID ( " t0_clk " , " atmel_tcb.0 " , & tc0_clk ) ,
CLKDEV_CON_DEV_ID ( " t1_clk " , " atmel_tcb.0 " , & tc1_clk ) ,
CLKDEV_CON_DEV_ID ( " t2_clk " , " atmel_tcb.0 " , & tc2_clk ) ,
2012-11-06 13:57:51 +08:00
CLKDEV_CON_DEV_ID ( " pclk " , " at91rm9200_ssc.0 " , & ssc0_clk ) ,
CLKDEV_CON_DEV_ID ( " pclk " , " at91rm9200_ssc.1 " , & ssc1_clk ) ,
2012-11-07 11:41:41 +08:00
CLKDEV_CON_DEV_ID ( " pclk " , " fffc0000.ssc " , & ssc0_clk ) ,
CLKDEV_CON_DEV_ID ( " pclk " , " fffc4000.ssc " , & ssc1_clk ) ,
2011-11-08 11:49:46 +01:00
CLKDEV_CON_DEV_ID ( NULL , " i2c-at91sam9g20.0 " , & twi0_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " i2c-at91sam9g20.1 " , & twi1_clk ) ,
2014-05-29 01:20:08 +02:00
CLKDEV_CON_DEV_ID ( NULL , " at91sam9rl-pwm " , & pwm_clk ) ,
2011-11-13 13:00:58 +08:00
CLKDEV_CON_ID ( " pioA " , & pioA_clk ) ,
CLKDEV_CON_ID ( " pioB " , & pioB_clk ) ,
CLKDEV_CON_ID ( " pioC " , & pioC_clk ) ,
CLKDEV_CON_ID ( " pioD " , & pioD_clk ) ,
2014-03-12 10:43:37 +01:00
/* more lookup table for DT entries */
CLKDEV_CON_DEV_ID ( " usart " , " fffff200.serial " , & mck ) ,
CLKDEV_CON_DEV_ID ( " usart " , " fffb0000.serial " , & usart0_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " ffffb400.serial " , & usart1_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " ffffb800.serial " , & usart2_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " ffffbc00.serial " , & usart3_clk ) ,
CLKDEV_CON_DEV_ID ( " t0_clk " , " fffa0000.timer " , & tc0_clk ) ,
CLKDEV_CON_DEV_ID ( " t1_clk " , " fffa0000.timer " , & tc1_clk ) ,
CLKDEV_CON_DEV_ID ( " t2_clk " , " fffa0000.timer " , & tc2_clk ) ,
CLKDEV_CON_DEV_ID ( " mci_clk " , " fffa4000.mmc " , & mmc_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffa8000.i2c " , & twi0_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffac000.i2c " , & twi1_clk ) ,
2013-12-19 11:59:16 +08:00
CLKDEV_CON_DEV_ID ( NULL , " fffc8000.pwm " , & pwm_clk ) ,
2014-03-12 10:43:37 +01:00
CLKDEV_CON_DEV_ID ( NULL , " ffffc800.pwm " , & pwm_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffff400.gpio " , & pioA_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffff600.gpio " , & pioB_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffff800.gpio " , & pioC_clk ) ,
CLKDEV_CON_DEV_ID ( NULL , " fffffa00.gpio " , & pioD_clk ) ,
2014-04-15 12:28:03 +02:00
CLKDEV_CON_ID ( " adc_clk " , & tsc_clk ) ,
2011-02-02 07:27:07 +01:00
} ;
static struct clk_lookup usart_clocks_lookups [ ] = {
CLKDEV_CON_DEV_ID ( " usart " , " atmel_usart.0 " , & mck ) ,
CLKDEV_CON_DEV_ID ( " usart " , " atmel_usart.1 " , & usart0_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " atmel_usart.2 " , & usart1_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " atmel_usart.3 " , & usart2_clk ) ,
CLKDEV_CON_DEV_ID ( " usart " , " atmel_usart.4 " , & usart3_clk ) ,
} ;
2007-05-11 20:49:56 +01:00
/*
* The two programmable clocks .
* You must configure pin multiplexing to bring these signals out .
*/
static struct clk pck0 = {
. name = " pck0 " ,
. pmc_mask = AT91_PMC_PCK0 ,
. type = CLK_TYPE_PROGRAMMABLE ,
. id = 0 ,
} ;
static struct clk pck1 = {
. name = " pck1 " ,
. pmc_mask = AT91_PMC_PCK1 ,
. type = CLK_TYPE_PROGRAMMABLE ,
. id = 1 ,
} ;
static void __init at91sam9rl_register_clocks ( void )
{
int i ;
for ( i = 0 ; i < ARRAY_SIZE ( periph_clocks ) ; i + + )
clk_register ( periph_clocks [ i ] ) ;
2011-02-02 07:27:07 +01:00
clkdev_add_table ( periph_clocks_lookups ,
ARRAY_SIZE ( periph_clocks_lookups ) ) ;
clkdev_add_table ( usart_clocks_lookups ,
ARRAY_SIZE ( usart_clocks_lookups ) ) ;
2007-05-11 20:49:56 +01:00
clk_register ( & pck0 ) ;
clk_register ( & pck1 ) ;
}
2014-03-12 10:43:42 +01:00
# endif
2007-05-11 20:49:56 +01:00
/* --------------------------------------------------------------------
* GPIO
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2011-10-17 14:28:38 +08:00
static struct at91_gpio_bank at91sam9rl_gpio [ ] __initdata = {
2007-05-11 20:49:56 +01:00
{
. id = AT91SAM9RL_ID_PIOA ,
2011-09-16 23:37:50 +08:00
. regbase = AT91SAM9RL_BASE_PIOA ,
2007-05-11 20:49:56 +01:00
} , {
. id = AT91SAM9RL_ID_PIOB ,
2011-09-16 23:37:50 +08:00
. regbase = AT91SAM9RL_BASE_PIOB ,
2007-05-11 20:49:56 +01:00
} , {
. id = AT91SAM9RL_ID_PIOC ,
2011-09-16 23:37:50 +08:00
. regbase = AT91SAM9RL_BASE_PIOC ,
2007-05-11 20:49:56 +01:00
} , {
. id = AT91SAM9RL_ID_PIOD ,
2011-09-16 23:37:50 +08:00
. regbase = AT91SAM9RL_BASE_PIOD ,
2007-05-11 20:49:56 +01:00
}
} ;
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2011-04-23 15:28:34 +08:00
static void __init at91sam9rl_map_io ( void )
2007-05-11 20:49:56 +01:00
{
2011-04-23 22:12:57 +08:00
unsigned long sram_size ;
2007-05-11 20:49:56 +01:00
2011-04-23 22:12:57 +08:00
switch ( at91_soc_initdata . cidr & AT91_CIDR_SRAMSIZ ) {
2007-05-11 20:49:56 +01:00
case AT91_CIDR_SRAMSIZ_32K :
sram_size = 2 * SZ_16K ;
break ;
case AT91_CIDR_SRAMSIZ_16K :
default :
sram_size = SZ_16K ;
}
/* Map SRAM */
2011-05-10 03:20:09 +08:00
at91_init_sram ( 0 , AT91SAM9RL_SRAM_BASE , sram_size ) ;
2011-04-28 20:19:32 +08:00
}
2007-05-11 20:49:56 +01:00
2011-10-14 01:17:18 +08:00
static void __init at91sam9rl_ioremap_registers ( void )
{
2011-11-01 01:23:20 +08:00
at91_ioremap_shdwc ( AT91SAM9RL_BASE_SHDWC ) ;
2011-11-18 01:25:52 +08:00
at91_ioremap_rstc ( AT91SAM9RL_BASE_RSTC ) ;
2012-02-13 12:58:53 +08:00
at91_ioremap_ramc ( 0 , AT91SAM9RL_BASE_SDRAMC , 512 ) ;
2011-09-18 22:29:50 +08:00
at91sam926x_ioremap_pit ( AT91SAM9RL_BASE_PIT ) ;
2011-10-14 01:37:09 +08:00
at91sam9_ioremap_smc ( 0 , AT91SAM9RL_BASE_SMC ) ;
2011-11-27 23:15:50 +08:00
at91_ioremap_matrix ( AT91SAM9RL_BASE_MATRIX ) ;
2013-10-16 16:24:57 +02:00
at91_pm_set_standby ( at91sam9_sdram_standby ) ;
2011-10-14 01:17:18 +08:00
}
2011-04-24 18:20:28 +08:00
static void __init at91sam9rl_initialize ( void )
2011-04-28 20:19:32 +08:00
{
2012-02-05 20:25:32 +08:00
arm_pm_idle = at91sam9_idle ;
2011-11-03 09:53:29 +00:00
arm_pm_restart = at91sam9_alt_restart ;
2007-05-11 20:49:56 +01:00
ARM: at91: fix hanged boot due to early rtc-interrupt
Make sure the RTC-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for
example, after a reset during an RTC-update or if an RTC-alarm goes off
after shutdown (e.g. when using RTC wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
2013-10-16 11:56:14 +02:00
at91_sysirq_mask_rtc ( AT91SAM9RL_BASE_RTC ) ;
ARM: at91: fix hanged boot due to early rtt-interrupt
Make sure the RTT-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTT, for example, if an
RTT-alarm goes off after a non-clean shutdown (e.g. when using RTC
wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
2013-10-16 11:56:15 +02:00
at91_sysirq_mask_rtt ( AT91SAM9RL_BASE_RTT ) ;
ARM: at91: fix hanged boot due to early rtc-interrupt
Make sure the RTC-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for
example, after a reset during an RTC-update or if an RTC-alarm goes off
after shutdown (e.g. when using RTC wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
2013-10-16 11:56:14 +02:00
2007-05-11 20:49:56 +01:00
/* Register GPIO subsystem */
at91_gpio_init ( at91sam9rl_gpio , 4 ) ;
}
/* --------------------------------------------------------------------
* Interrupt initialization
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
/*
* The default interrupt priority levels ( 0 = lowest , 7 = highest ) .
*/
static unsigned int at91sam9rl_default_irq_priority [ NR_AIC_IRQS ] __initdata = {
7 , /* Advanced Interrupt Controller */
7 , /* System Peripherals */
1 , /* Parallel IO Controller A */
1 , /* Parallel IO Controller B */
1 , /* Parallel IO Controller C */
1 , /* Parallel IO Controller D */
5 , /* USART 0 */
5 , /* USART 1 */
5 , /* USART 2 */
5 , /* USART 3 */
0 , /* Multimedia Card Interface */
6 , /* Two-Wire Interface 0 */
6 , /* Two-Wire Interface 1 */
5 , /* Serial Peripheral Interface */
4 , /* Serial Synchronous Controller 0 */
4 , /* Serial Synchronous Controller 1 */
0 , /* Timer Counter 0 */
0 , /* Timer Counter 1 */
0 , /* Timer Counter 2 */
0 ,
0 , /* Touch Screen Controller */
0 , /* DMA Controller */
2 , /* USB Device High speed port */
2 , /* LCD Controller */
6 , /* AC97 Controller */
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 , /* Advanced Interrupt Controller */
} ;
2013-03-22 13:24:09 +00:00
AT91_SOC_START ( at91sam9rl )
2011-04-23 15:28:34 +08:00
. map_io = at91sam9rl_map_io ,
2011-04-23 15:28:34 +08:00
. default_irq_priority = at91sam9rl_default_irq_priority ,
2013-06-01 16:40:11 +02:00
. extern_irq = ( 1 < < AT91SAM9RL_ID_IRQ0 ) ,
2011-10-14 01:17:18 +08:00
. ioremap_registers = at91sam9rl_ioremap_registers ,
2014-03-12 10:43:42 +01:00
# if defined(CONFIG_OLD_CLK_AT91)
2011-04-24 18:15:34 +08:00
. register_clocks = at91sam9rl_register_clocks ,
2014-03-12 10:43:42 +01:00
# endif
2011-04-23 15:28:34 +08:00
. init = at91sam9rl_initialize ,
2012-08-16 17:36:55 +08:00
AT91_SOC_END