iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/multi_v5_defconfig

302 lines
6.6 KiB
Plaintext
Raw Normal View History

ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_SYSVIPC=y
ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y According to https://www.kernel.org/doc/html/latest/timers/no_hz.html, CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer kernels, so let's reflect that in the 32-bit ARM defconfigs. Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-25 18:20:35 +02:00
CONFIG_NO_HZ_IDLE=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_HIGH_RES_TIMERS=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_PREEMPT=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_LOG_BUF_SHIFT=19
ARM: multi_v5_defconfig: Enable recommended options for systemd Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by systemd (which also matches the multi_v7 defconfig). Also enable IPV6, which defaults to 'y' by now. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:26 +01:00
CONFIG_CGROUPS=y
ARM: multi_v5_defconfig: Enable initramfs support This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-24 16:03:19 +01:00
CONFIG_BLK_DEV_INITRD=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_PROFILING=y
# CONFIG_ARCH_MULTI_V7 is not set
arm/configs/multi_v5: Add Aspeed ast2400 This adds the Aspeed ast2400 BMC SoC to the build. The SoC has six UARTs so we need to enable the appropriate options for SERIAL_8250 Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:08:05 +09:30
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
ARM: config: multi_v5: Refresh configuration This is the result of a make mutli_v5_defconfig && make savedefconfig. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:01 +09:30
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91SAM9=y
ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build Add all DaVinci boards to multi_v5_defconfig. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-25 15:12:57 +02:00
CONFIG_ARCH_DAVINCI=y
CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_ARCH_MXC=y
ARM: config: Regenerate multi_v5_defconfig Dues the Kconfig changes, multi_v5_defconfig needs regenerating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02 00:33:28 +01:00
CONFIG_SOC_IMX25=y
ARM: imx: Remove i.MX27 board files i.MX27 has basic device tree support. To achieve the goal of converting all i.MX SoCs to a devicetree-only platform, remove imx27 board files. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-02 09:49:49 -03:00
CONFIG_SOC_IMX27=y
ARM: config: multi_v5: Refresh configuration This is the result of a make mutli_v5_defconfig && make savedefconfig. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:01 +09:30
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
ARM: config: Add WPCM to multi v5 This is a newly added ARM926 platform that is not covered by any other defconfigs. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210409054511.1534181-1-joel@jms.id.au
2021-04-09 15:15:11 +09:30
CONFIG_ARCH_NPCM=y
CONFIG_ARCH_WPCM450=y
ARM: config: Add orion5x to multi_v5_defconfig Now that Orion5x is part of the v5 multiarch kernel enable it in the multi_v5_defconfig. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02 00:33:30 +01:00
CONFIG_ARCH_ORION5X=y
CONFIG_MACH_RD88F5182_DT=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
CONFIG_MACH_D2NET_DT=y
CONFIG_MACH_NET2BIG=y
CONFIG_MACH_MSS2_DT=y
ARM: configs: multi_v5: Enable Allwinner F1C100 The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:43 +00:00
CONFIG_ARCH_SUNXI=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_ARCH_VERSATILE=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CPU_FREQ=y
cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05 13:57:41 +05:30
CONFIG_CPU_FREQ_STAT=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_KIRKWOOD_CPUIDLE=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
ARM: defconfig: Add IOSCHED_BFQ to the default configs ARM systems are often memory constrained and more often than not use slow single-channel storage such as flash memory or MMC/SD-cards. For any interactive systems (such as mobile phones, tablets, chromebooks...) the BFQ I/O scheduler will be desireable. Make sure the BFQ I/O scheduler is available on these systems. Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in their defconfigs, cf commit b495dfed706c4c5873c0dab8930ad6eb1d276a6c "um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that it replaces the former CFQ scheduler. Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230203140404.1125850-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-03 15:04:04 +01:00
CONFIG_IOSCHED_BFQ=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
ARM: config: Reenable DSA in multi_v5_defconfig DSA now depends on switchdev. Enable it, and re-enable DSA and its drivers, which were removed when multi_v5_defconfig was regenerated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02 00:33:29 +01:00
CONFIG_NET_DSA=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_NET_PKTGEN=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_PCI_MVEBU=y
arm: multi_v5: enable configs for versatile Make it possible to boot a versatile machine in qemu. Boot command: /usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \ -nographic -nic none -m 256M -monitor none -no-reboot \ -kernel zImage -dtb versatile-pb.dtb \ -append "console=ttyAMA0,115200 rootwait root=/dev/vda" \ -drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \ -device virtio-blk-pci,drive=hd0 When doing build and boot testing, it makes more sense to enable arch vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to multi_v5_defconfig to make that boot out of the box, with a modern virtio (mmio|blk|pci) driver. Using the above commandline. Another way to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses podman to do the build/tests inside. This makes both project a good tool to use when finding a regression that you would like someone else to reproduce with the exact same setup. tuxmake --runtime podman --target-arch arm \ --toolchain gcc-11 --kconfig multi_v5_defconfig tuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5 [1] https://tuxmake.org/ [2] https://tuxrun.org/ Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20220308121933.3967868-1-anders.roxell@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08 13:19:33 +01:00
CONFIG_PCI_VERSATILE=y
ARM: multi_v5_defconfig: Enable recommended options for systemd Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by systemd (which also matches the multi_v7 defconfig). Also enable IPV6, which defaults to 'y' by now. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:26 +01:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_IMX_WEIM=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 16:47:44 +01:00
CONFIG_MTD_RAW_NAND=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MTD_NAND_ATMEL=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MTD_NAND_ORION=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_MTD_SPI_NOR=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MTD_UBI=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_BLK_DEV_LOOP=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_VIRTIO_BLK=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_ATMEL_SSC=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
ARM: config: Reenable DSA in multi_v5_defconfig DSA now depends on switchdev. Enable it, and re-enable DSA and its drivers, which were removed when multi_v5_defconfig was regenerated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02 00:33:29 +01:00
CONFIG_NET_DSA_MV88E6060=y
net: dsa: mv88e6xxx: factorize the switch driver Now that all drivers support the same set of functions and the same setup code, drop every model-specific DSA switch driver and replace them with a common mv88e6xxx driver. This merges the info tables into one, removes the function exports, the model-specific files, and update the defconfigs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09 13:22:58 -04:00
CONFIG_NET_DSA_MV88E6XXX=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MACB=y
CONFIG_DM9000=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_FTGMAC100=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_DAVICOM_PHY=y
ARM: config: multi_v5: Refresh configuration This is the result of a make mutli_v5_defconfig && make savedefconfig. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:01 +09:30
CONFIG_MARVELL_PHY=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MICREL_PHY=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig Regenerate multi_v5_defconfig by running: make multi_v5_defconfig make savedefconfig mv defconfig arch/arm/configs/multi_v5_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-24 16:03:18 +01:00
CONFIG_MWL8K=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_INPUT_EVDEV=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_KEYBOARD_QT1070=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm/configs/multi_v5: Add Aspeed ast2400 This adds the Aspeed ast2400 BMC SoC to the build. The SoC has six UARTs so we need to enable the appropriate options for SERIAL_8250 Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:08:05 +09:30
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_SERIAL_8250_ASPEED_VUART=m
ARM: configs: multi_v5: Enable Allwinner F1C100 The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:43 +00:00
CONFIG_SERIAL_8250_DW=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_SERIAL_OF_PLATFORM=y
arm: multi_v5: enable configs for versatile Make it possible to boot a versatile machine in qemu. Boot command: /usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \ -nographic -nic none -m 256M -monitor none -no-reboot \ -kernel zImage -dtb versatile-pb.dtb \ -append "console=ttyAMA0,115200 rootwait root=/dev/vda" \ -drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \ -device virtio-blk-pci,drive=hd0 When doing build and boot testing, it makes more sense to enable arch vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to multi_v5_defconfig to make that boot out of the box, with a modern virtio (mmio|blk|pci) driver. Using the above commandline. Another way to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses podman to do the build/tests inside. This makes both project a good tool to use when finding a regression that you would like someone else to reproduce with the exact same setup. tuxmake --runtime podman --target-arch arm \ --toolchain gcc-11 --kconfig multi_v5_defconfig tuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5 [1] https://tuxmake.org/ [2] https://tuxrun.org/ Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20220308121933.3967868-1-anders.roxell@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08 13:19:33 +01:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_TTYAT=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_ASPEED_KCS_IPMI_BMC=m
CONFIG_ASPEED_BT_IPMI_BMC=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_HW_RANDOM=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_HW_RANDOM_TIMERIOMEM=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_I2C_ASPEED=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_I2C_AT91=y
ARM: multi_v5_defconfig: Enable I2C_GPIO A GPIO based I2C bus is used by at least some Atmel reference boards, including the AT91SAM9G20-EK which is in CI, enable the driver as a module to improve test coverage and help users of systems that happen to use it. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230109-arm-multi-v5-i2c-gpio-v1-1-78e191358548@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09 23:46:53 +00:00
CONFIG_I2C_GPIO=m
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_I2C_IMX=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_I2C_MV64XXX=y
CONFIG_SPI=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_SPI_ASPEED_SMC=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_SPI_ATMEL=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_SPI_IMX=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_SPI_ORION=y
ARM: configs: multi_v5: Enable Allwinner F1C100 The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:43 +00:00
CONFIG_SPI_SUN6I=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_GPIO_ASPEED=m
ARM: config: multi_v5: ASPEED SDHCI, SGPIO Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 11:09:07 +10:30
CONFIG_GPIO_ASPEED_SGPIO=y
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the CONFIG_GPIO_MXC option needs to be explicitly selected. Select it to avoid boot issues on imx25/imx27 due to the lack of the GPIO driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26 11:20:40 -03:00
CONFIG_GPIO_MXC=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_QNAP=y
CONFIG_SENSORS_ADT7475=y
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_SENSORS_ASPEED=y
ARM: multi_v5: Enable LaCie 2Big and 5Big Network v2 Enable building LaCie 2Big and 5Big Network v2 in the multi v5 kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1401132591-26305-5-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-26 21:29:51 +02:00
CONFIG_SENSORS_G762=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM85=y
CONFIG_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_AT91SAM9X_WATCHDOG=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_ORION_WATCHDOG=y
ARM: configs: multi_v5: Enable Allwinner F1C100 The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:43 +00:00
CONFIG_SUNXI_WATCHDOG=y
ARM: config: Add WPCM to multi v5 This is a newly added ARM926 platform that is not covered by any other defconfigs. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210409054511.1534181-1-joel@jms.id.au
2021-04-09 15:15:11 +09:30
CONFIG_NPCM7XX_WATCHDOG=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_IMX2_WDT=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MFD_ATMEL_HLCDC=y
ARM: config: Regenerate multi_v5_defconfig Dues the Kconfig changes, multi_v5_defconfig needs regenerating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-02 00:33:28 +01:00
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow more fine grained control over the inclusion of certain Kconfig files. multi_v5_defconfig was selecting some drivers described in drivers/media/platform/Kconfig, which now wasn't included anymore. Explicitly set the new symbol in multi_v5_defconfig to bring those drivers back. This enables some new V4L2 and VIDEOBUF2 features, but as modules only. Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-3-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:40 +00:00
CONFIG_MEDIA_PLATFORM_SUPPORT=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: configs: multi_v5: Add more ASPEED devices Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:36:12 +09:30
CONFIG_VIDEO_ASPEED=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_VIDEO_ATMEL_ISI=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_PANEL_SIMPLE=y
ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-09-14 13:21:52 -07:00
CONFIG_DRM_PANEL_EDP=y
ARM: configs: multi_v5: Add more ASPEED devices Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:36:12 +09:30
CONFIG_DRM_ASPEED_GFX=m
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx Commit 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option") led to de-selection of CONFIG_FB, which was a prerequisite for BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on. Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP, FB_IMX and FB_ATMEL back into the generated .config. This also adds some new FB related features like fonts and the framebuffer console. See also commit 8c1768967e27 ("ARM: config: mutli v7: Reenable FB dependency"), which solved the same problem for multi_v7_defconfig. This relies on [1], to fix a broken Kconfig dependency. [1] https://lore.kernel.org/dri-devel/20220315084559.23510-1-tzimmermann@suse.de/raw Fixes: 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-4-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:41 +00:00
CONFIG_FB=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_FB_IMX=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig The HP T5325 has a PCI based VGA controller. Add the frame buffer driver, and frame buffer support to the defconfig's. Additionally add the soc audio framework and the necessary codec. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25 18:34:03 +01:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=m
CONFIG_SND_ATMEL_SOC_WM8904=m
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig The HP T5325 has a PCI based VGA controller. Add the frame buffer driver, and frame buffer support to the defconfig's. Additionally add the soc audio framework and the necessary codec. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25 18:34:03 +01:00
CONFIG_SND_KIRKWOOD_SOC=y
ARM: multi_v5_defconfig: Enable sound modules needed for t5325 Enable simple-card and the CODEC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-10-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-03 20:30:19 +02:00
CONFIG_SND_SOC_ALC5623=y
ARM: configs: Update multi_v5_defconfig for WM8731 bus refactoring The WM8731 driver has been refactored so the I2C and SPI bus code is separate modules. Refresh multi_v5_defconfig to reflect this. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: soc@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-25 15:31:21 +00:00
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8731_SPI=y
ARM: multi_v5_defconfig: Enable sound modules needed for t5325 Enable simple-card and the CODEC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-10-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-03 20:30:19 +02:00
CONFIG_SND_SIMPLE_CARD=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_USB_OHCI_HCD=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
ARM: multi_v5_defconfig: Enable support for MX21/MX27 Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-26 12:28:25 +01:00
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_USB_GADGET=y
CONFIG_USB_AT91=m
CONFIG_USB_ATMEL_USBA=m
ARM: configs: multi_v5: Add more ASPEED devices Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:36:12 +09:30
CONFIG_USB_ASPEED_VHUB=m
CONFIG_USB_CONFIGFS=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MMC=y
CONFIG_SDIO_UART=y
ARM: config: multi_v5: ASPEED SDHCI, SGPIO Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-12 11:09:07 +10:30
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_OF_ASPEED=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_MMC_ATMELMCI=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MMC_MVSDIO=y
ARM: configs: multi_v5: Enable Allwinner F1C100 The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:43 +00:00
CONFIG_MMC_SUNXI=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_S35390A=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_RTC_DRV_MV=y
ARM: configs: multi_v5: Add more ASPEED devices Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:36:12 +09:30
CONFIG_RTC_DRV_ASPEED=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_DMADEVICES=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_AT_HDMAC=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MV_XOR=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_MMIO=y
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig The HP T5325 has a PCI based VGA controller. Add the frame buffer driver, and frame buffer support to the defconfig's. Additionally add the soc audio framework and the necessary codec. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25 18:34:03 +01:00
CONFIG_STAGING=y
ARM: configs: multi_v5: Add more ASPEED devices Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 17:36:12 +09:30
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_ASPEED_P2A_CTRL=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_IIO=m
ARM: config: multi_v5: Enable ASPEED drivers This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-18 23:23:02 +09:30
CONFIG_ASPEED_ADC=m
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_AT91_ADC=m
CONFIG_PWM=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_ATMEL_TCB=m
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
ARM: multi_v5_defconfig: enable Atmel platforms Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-08 18:52:53 +02:00
CONFIG_UBIFS_FS=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_UTF8=y
ARM: defconfig: re-run savedefconfig on multi_v* configs This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05 13:14:37 -08:00
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_DEBUG_KERNEL=y
ARM: defconfig: reorder defconfig files The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-11 15:56:36 +02:00
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
CONFIG_MAGIC_SYSRQ=y
ARM: configs: clean up multi_v5_defconfig Clean up some cruft accumulated over time: - The default definition of CONFIG_ZBOOT_ROM_* got fixed in commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so we don't need the explicit setting anymore. - CONFIG_ABX500_CORE now explicitly depends on the ARMv7 ARCH_U8500, so we don't need to disable that symbol explicitly anymore. - CONFIG_DEBUG_FS was just moved around in the generated defconfig. No change to the generated .config or savedefconfig. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-5-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-17 18:30:42 +00:00
CONFIG_DEBUG_FS=y
ARM: config: Add a multi_v5_defconfig To allow regression build testing of multi v5 systems, add a multi_v5_defconfig, similar to the multi_v7_defconfig. This is based on kirkwood_defconfig, but with a few other boards added which claim to be MULTI_v5. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 20:15:02 +01:00
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
Reference in New Issue Copy Permalink