2009-07-29 00:45:54 +04:00
/*
* acpi / internal . h
* For use by Linux / ACPI infrastructure , not drivers
*
* Copyright ( c ) 2009 , Intel Corporation .
*
* This program is free software ; you can redistribute it and / or modify it
* under the terms and conditions of the GNU General Public License ,
* version 2 , as published by the Free Software Foundation .
*
* This program is distributed in the hope it will be useful , but WITHOUT
* ANY WARRANTY ; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE . See the GNU General Public License for
* more details .
*
* You should have received a copy of the GNU General Public License along with
* this program ; if not , write to the Free Software Foundation , Inc . ,
* 51 Franklin St - Fifth Floor , Boston , MA 02110 - 1301 USA .
*/
2010-07-16 15:11:31 +04:00
# ifndef _ACPI_INTERNAL_H_
# define _ACPI_INTERNAL_H_
2009-07-29 00:45:54 +04:00
# define PREFIX "ACPI: "
2009-03-13 21:08:26 +03:00
2013-07-23 12:11:55 +04:00
acpi_status acpi_os_initialize1 ( void ) ;
2009-03-25 01:50:09 +03:00
int init_acpi_device_notify ( void ) ;
2009-03-25 01:49:43 +03:00
int acpi_scan_init ( void ) ;
2013-01-30 17:27:33 +04:00
void acpi_pci_root_init ( void ) ;
2013-01-30 17:27:37 +04:00
void acpi_pci_link_init ( void ) ;
ACPI / processor: Use common hotplug infrastructure
Split the ACPI processor driver into two parts, one that is
non-modular, resides in the ACPI core and handles the enumeration
and hotplug of processors and one that implements the rest of the
existing processor driver functionality.
The non-modular part uses an ACPI scan handler object to enumerate
processors on the basis of information provided by the ACPI namespace
and to hook up with the common ACPI hotplug infrastructure. It also
populates the ACPI handle of each processor device having a
corresponding object in the ACPI namespace, which allows the driver
proper to bind to those devices, and makes the driver bind to them
if it is readily available (i.e. loaded) when the scan handler's
.attach() routine is running.
There are a few reasons to make this change.
First, switching the ACPI processor driver to using the common ACPI
hotplug infrastructure reduces code duplication and size considerably,
even though a new file is created along with a header comment etc.
Second, since the common hotplug code attempts to offline devices
before starting the (non-reversible) removal procedure, it will abort
(and possibly roll back) hot-remove operations involving processors
if cpu_down() returns an error code for one of them instead of
continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove
is unset). That is a more desirable behavior than what the current
code does.
Finally, the separation of the scan/hotplug part from the driver
proper makes it possible to simplify the driver's .remove() routine,
because it doesn't need to worry about the possible cleanup related
to processor removal any more (the scan/hotplug part is responsible
for that now) and can handle device removal and driver removal
symmetricaly (i.e. as appropriate).
Some user-visible changes in sysfs are made (for example, the
'sysdev' link from the ACPI device node to the processor device's
directory is gone and a 'physical_node' link is present instead
and a corresponding 'firmware_node' is present in the processor
device's directory, the processor driver is now visible under
/sys/bus/cpu/drivers/ and bound to the processor device), but
that shouldn't affect the functionality that users care about
(frequency scaling, C-states and thermal management).
Tested on my venerable Toshiba Portege R500.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
void acpi_processor_init ( void ) ;
2013-01-30 17:27:40 +04:00
void acpi_platform_init ( void ) ;
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently. Namely, if an ACPI device
object
1. Has a _CRS method,
2. Has an identification of
"three capital characters followed by four hex digits",
3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it). This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.
However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them). As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices. That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.
To address that problem it is better to enumerate _HID devices
as platform devices by default. To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.
The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers. Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 06:23:01 +04:00
void acpi_pnp_init ( void ) ;
2014-03-13 20:34:05 +04:00
void acpi_int340x_thermal_init ( void ) ;
2010-07-15 06:46:30 +04:00
int acpi_sysfs_init ( void ) ;
2013-02-09 02:52:39 +04:00
void acpi_container_init ( void ) ;
2014-05-30 06:29:14 +04:00
void acpi_memory_hotplug_init ( void ) ;
2015-02-05 08:44:49 +03:00
# ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
int acpi_ioapic_add ( struct acpi_pci_root * root ) ;
int acpi_ioapic_remove ( struct acpi_pci_root * root ) ;
# else
static inline int acpi_ioapic_add ( struct acpi_pci_root * root ) { return 0 ; }
static inline int acpi_ioapic_remove ( struct acpi_pci_root * root ) { return 0 ; }
# endif
2013-06-23 02:59:55 +04:00
# ifdef CONFIG_ACPI_DOCK
ACPI / dock: Dispatch dock notifications from the global notify handler
The ACPI dock station code carries out an extra namespace scan
before the main one in order to find and register all of the dock
device objects. Then, it registers a notify handler for each of
them for handling dock events.
However, dock device objects need not be scanned for upfront. They
very well can be enumerated and registered during the first phase
of the main namespace scan, before attaching scan handlers and ACPI
drivers to ACPI device objects. Then, the dependent devices can be
added to the in the second phase. That makes it possible to drop
the extra namespace scan, so do it.
Moreover, it is not necessary to register notify handlers for all
of the dock stations' namespace nodes, becuase notifications may
be dispatched from the global notify handler for them. Do that and
drop two functions used for dock notify handling, acpi_dock_deferred_cb()
and dock_notify_handler(), that aren't necessary any more.
Finally, some dock station objects have _HID objects matching the
ACPI container scan handler which causes it to claim those objects
and try to handle their hotplug, but that is not a good idea,
because those objects have their own special hotplug handling anyway.
For this reason, the hotplug_notify flag should not be set for ACPI
device objects representing dock stations and the container scan
handler should be made ignore those objects, so make that happen.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 04:51:01 +04:00
void register_dock_dependent_device ( struct acpi_device * adev ,
acpi_handle dshandle ) ;
int dock_notify ( struct acpi_device * adev , u32 event ) ;
void acpi_dock_add ( struct acpi_device * adev ) ;
2013-06-23 02:59:55 +04:00
# else
ACPI / dock: Dispatch dock notifications from the global notify handler
The ACPI dock station code carries out an extra namespace scan
before the main one in order to find and register all of the dock
device objects. Then, it registers a notify handler for each of
them for handling dock events.
However, dock device objects need not be scanned for upfront. They
very well can be enumerated and registered during the first phase
of the main namespace scan, before attaching scan handlers and ACPI
drivers to ACPI device objects. Then, the dependent devices can be
added to the in the second phase. That makes it possible to drop
the extra namespace scan, so do it.
Moreover, it is not necessary to register notify handlers for all
of the dock stations' namespace nodes, becuase notifications may
be dispatched from the global notify handler for them. Do that and
drop two functions used for dock notify handling, acpi_dock_deferred_cb()
and dock_notify_handler(), that aren't necessary any more.
Finally, some dock station objects have _HID objects matching the
ACPI container scan handler which causes it to claim those objects
and try to handle their hotplug, but that is not a good idea,
because those objects have their own special hotplug handling anyway.
For this reason, the hotplug_notify flag should not be set for ACPI
device objects representing dock stations and the container scan
handler should be made ignore those objects, so make that happen.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 04:51:01 +04:00
static inline void register_dock_dependent_device ( struct acpi_device * adev ,
acpi_handle dshandle ) { }
static inline int dock_notify ( struct acpi_device * adev , u32 event ) { return - ENODEV ; }
static inline void acpi_dock_add ( struct acpi_device * adev ) { }
2013-06-23 02:59:55 +04:00
# endif
2013-06-05 06:27:50 +04:00
# ifdef CONFIG_X86
void acpi_cmos_rtc_init ( void ) ;
# else
static inline void acpi_cmos_rtc_init ( void ) { }
# endif
2009-03-25 01:49:43 +03:00
2013-05-03 02:26:16 +04:00
extern bool acpi_force_hot_remove ;
2013-03-04 02:08:16 +04:00
void acpi_sysfs_add_hotplug_profile ( struct acpi_hotplug_profile * hotplug ,
const char * name ) ;
int acpi_scan_add_handler_with_hotplug ( struct acpi_scan_handler * handler ,
const char * hotplug_profile_name ) ;
void acpi_scan_hotplug_enabled ( struct acpi_hotplug_profile * hotplug , bool val ) ;
2010-07-15 06:46:15 +04:00
# ifdef CONFIG_DEBUG_FS
2011-05-26 14:26:23 +04:00
extern struct dentry * acpi_debugfs_dir ;
2010-07-15 06:46:15 +04:00
int acpi_debugfs_init ( void ) ;
# else
2011-05-26 14:26:23 +04:00
static inline void acpi_debugfs_init ( void ) { return ; }
2010-07-15 06:46:15 +04:00
# endif
2013-03-07 02:46:20 +04:00
void acpi_lpss_init ( void ) ;
2010-07-15 06:46:15 +04:00
2015-02-06 03:27:51 +03:00
void acpi_apd_init ( void ) ;
2014-03-03 03:40:38 +04:00
acpi_status acpi_hotplug_schedule ( struct acpi_device * adev , u32 src ) ;
2013-11-23 00:52:12 +04:00
bool acpi_queue_hotplug_work ( struct work_struct * work ) ;
2014-03-03 03:40:38 +04:00
void acpi_device_hotplug ( struct acpi_device * adev , u32 src ) ;
ACPI / hotplug / driver core: Handle containers in a special way
ACPI container devices require special hotplug handling, at least
on some systems, since generally user space needs to carry out
system-specific cleanup before it makes sense to offline devices in
the container. However, the current ACPI hotplug code for containers
first attempts to offline devices in the container and only then it
notifies user space of the container offline.
Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device
objects for all device nodes in the namespace), ACPI device objects
representing containers are present as long as the ACPI namespace
nodes corresponding to them are present, which may be forever, even
if the container devices are physically detached from the system (the
return values of the corresponding _STA methods change in those
cases, but generally the namespace nodes themselves are still there).
Thus it is useful to introduce entities representing containers that
will go away during container hot-unplug.
The goal of this change is to address both the above issues.
The idea is to create a "companion" container system device for each
of the ACPI container device objects during the initial namespace
scan or on a hotplug event making the container present. That system
device will be unregistered on container removal. A new bus type
for container devices is added for this purpose, because device
offline and online operations need to be defined for them. The
online operation is a trivial function that is always successful
and the offline uses a callback pointed to by the container device's
offline member.
For ACPI containers that callback simply walks the list of ACPI
device objects right below the container object (its children) and
checks if all of their physical companion devices are offline. If
that's not the case, it returns -EBUSY and the container system
devivce cannot be put offline. Consequently, to put the container
system device offline, it is necessary to put all of the physical
devices depending on its ACPI companion object offline beforehand.
Container system devices created for ACPI container objects are
initially online. They are created by the container ACPI scan
handler whose hotplug.demand_offline flag is set. That causes
acpi_scan_hot_remove() to check if the companion container system
device is offline before attempting to remove an ACPI container or
any devices below it. If the check fails, a KOBJ_CHANGE uevent is
emitted for the container system device in question and user space
is expected to offline all devices below the container and the
container itself in response to it. Then, user space can finalize
the removal of the container with the help of its ACPI device
object's eject attribute in sysfs.
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29 18:25:48 +04:00
bool acpi_scan_is_offline ( struct acpi_device * adev , bool uevent ) ;
2013-11-23 00:52:12 +04:00
2013-01-17 17:11:05 +04:00
/* --------------------------------------------------------------------------
Device Node Initialization / Removal
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
# define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING )
2013-01-24 15:49:49 +04:00
int acpi_device_add ( struct acpi_device * device ,
void ( * release ) ( struct device * ) ) ;
2013-01-17 17:11:05 +04:00
void acpi_init_device_object ( struct acpi_device * device , acpi_handle handle ,
int type , unsigned long long sta ) ;
2013-01-24 15:49:49 +04:00
void acpi_device_add_finalize ( struct acpi_device * device ) ;
2013-03-05 01:30:42 +04:00
void acpi_free_pnp_ids ( struct acpi_device_pnp * pnp ) ;
ACPI / scan: Add acpi_device objects for all device nodes in the namespace
Modify the ACPI namespace scanning code to register a struct
acpi_device object for every namespace node representing a device,
processor and so on, even if the device represented by that namespace
node is reported to be not present and not functional by _STA.
There are multiple reasons to do that. First of all, it avoids
quite a lot of overhead when struct acpi_device objects are
deleted every time acpi_bus_trim() is run and then added again
by a subsequent acpi_bus_scan() for the same scope, although the
namespace objects they correspond to stay in memory all the time
(which always is the case on a vast majority of systems).
Second, it will allow user space to see that there are namespace
nodes representing devices that are not present at the moment and may
be added to the system. It will also allow user space to evaluate
_SUN for those nodes to check what physical slots the "missing"
devices may be put into and it will make sense to add a sysfs
attribute for _STA evaluation after this change (that will be
useful for thermal management on some systems).
Next, it will help to consolidate the ACPI hotplug handling among
subsystems by making it possible to store hotplug-related information
in struct acpi_device objects in a standard common way.
Finally, it will help to avoid a race condition related to the
deletion of ACPI namespace nodes. Namely, namespace nodes may be
deleted as a result of a table unload triggered by _EJ0 or _DCK.
If a hotplug notification for one of those nodes is triggered
right before the deletion and it executes a hotplug callback
via acpi_hotplug_execute(), the ACPI handle passed to that
callback may be stale when the callback actually runs. One way
to work around that is to always pass struct acpi_device pointers
to hotplug callbacks after doing a get_device() on the objects in
question which eliminates the use-after-free possibility (the ACPI
handles in those objects are invalidated by acpi_scan_drop_device(),
so they will trigger ACPICA errors on attempts to use them).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-23 00:54:37 +04:00
bool acpi_device_is_present ( struct acpi_device * adev ) ;
2014-02-16 03:09:34 +04:00
bool acpi_device_is_battery ( struct acpi_device * adev ) ;
2013-01-17 17:11:05 +04:00
2009-03-13 21:08:26 +03:00
/* --------------------------------------------------------------------------
Power Resource
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2009-03-25 01:49:53 +03:00
int acpi_power_init ( void ) ;
2013-01-17 17:11:06 +04:00
void acpi_power_resources_list_free ( struct list_head * list ) ;
2013-01-17 17:11:07 +04:00
int acpi_extract_power_resources ( union acpi_object * package , unsigned int start ,
struct list_head * list ) ;
int acpi_add_power_resource ( acpi_handle handle ) ;
ACPI / PM: Rework the handling of devices depending on power resources
Commit 0090def6 (ACPI: Add interface to register/unregister device
to/from power resources) made it possible to indicate to the ACPI
core that if the given device depends on any power resources, then
it should be resumed as soon as all of the power resources required
by it to transition to the D0 power state have been turned on.
Unfortunately, however, this was a mistake, because all devices
depending on power resources should be treated this way (i.e. they
should be resumed when all power resources required by their D0
state have been turned on) and for the majority of those devices
the ACPI core can figure out by itself which (physical) devices
depend on what power resources.
For this reason, replace the code added by commit 0090def6 with a
new, much more straightforward, mechanism that will be used
internally by the ACPI core and remove all references to that code
from kernel subsystems using ACPI.
For the cases when there are (physical) devices that should be
resumed whenever a not directly related ACPI device node goes into
D0 as a result of power resources configuration changes, like in
the SATA case, add two new routines, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), allowing subsystems to manage
such dependencies. Convert the SATA subsystem to use the new
functions accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 17:11:05 +04:00
void acpi_power_add_remove_device ( struct acpi_device * adev , bool add ) ;
ACPI / PM: Take unusual configurations of power resources into account
Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device
wakeup) moved the initial disabling of system wakeup for PCI devices
into a place where it can actually work and that exposed a hidden old
issue with crap^Wunusual system designs where the same power
resources are used for both wakeup power and device power control at
run time.
Namely, say there is one power resource such that the ACPI power
state D0 of a PCI device depends on that power resource (i.e. the
device is in D0 when that power resource is "on") and it is used
as a wakeup power resource for the same device. Then, calling
acpi_pci_sleep_wake(pci_dev, false) for the device in question will
cause the reference counter of that power resource to drop to 0,
which in turn will cause it to be turned off. As a result, the
device will go into D3cold at that point, although it should have
stayed in D0.
As it turns out, that happens to USB controllers on some laptops
and USB becomes unusable on those machines as a result, which is
a major regression from v3.8.
To fix this problem, (1) increment the reference counters of wakup
power resources during their initialization if they are "on"
initially, (2) prevent acpi_disable_wakeup_device_power() from
decrementing the reference counters of wakeup power resources that
were not enabled for wakeup power previously, and (3) prevent
acpi_enable_wakeup_device_power() from incrementing the reference
counters of wakeup power resources that already are enabled for
wakeup power.
In addition to that, if it is impossible to determine the initial
states of wakeup power resources, avoid enabling wakeup for devices
whose wakeup power depends on those power resources.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-24 02:15:21 +04:00
int acpi_power_wakeup_list_init ( struct list_head * list , int * system_level ) ;
2009-03-13 21:08:26 +03:00
int acpi_device_sleep_wake ( struct acpi_device * dev ,
int enable , int sleep_state , int dev_state ) ;
2010-11-25 02:05:17 +03:00
int acpi_power_get_inferred_state ( struct acpi_device * device , int * state ) ;
2010-11-25 02:06:55 +03:00
int acpi_power_on_resources ( struct acpi_device * device , int state ) ;
2009-03-13 21:08:26 +03:00
int acpi_power_transition ( struct acpi_device * device , int state ) ;
2009-03-25 01:50:19 +03:00
int acpi_wakeup_device_init ( void ) ;
2014-07-18 14:02:54 +04:00
# ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC
2009-12-20 22:19:09 +03:00
void acpi_early_processor_set_pdc ( void ) ;
2014-07-18 14:02:54 +04:00
# else
static inline void acpi_early_processor_set_pdc ( void ) { }
# endif
2009-03-25 01:50:19 +03:00
2009-03-13 21:08:26 +03:00
/* --------------------------------------------------------------------------
Embedded Controller
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2010-07-16 15:11:31 +04:00
struct acpi_ec {
acpi_handle handle ;
unsigned long gpe ;
unsigned long command_addr ;
unsigned long data_addr ;
unsigned long global_lock ;
unsigned long flags ;
2015-02-06 03:57:59 +03:00
unsigned long reference_count ;
2012-10-23 03:29:27 +04:00
struct mutex mutex ;
2010-07-16 15:11:31 +04:00
wait_queue_head_t wait ;
struct list_head list ;
struct transaction * curr ;
2012-10-23 03:29:27 +04:00
spinlock_t lock ;
ACPI / EC: Fix issues related to the SCI_EVT handling
This patch fixes 2 issues related to the draining behavior. But it doesn't
implement the draining support, it only cleans up code so that further
draining support is possible.
The draining behavior is expected by some platforms (for example, Samsung)
where SCI_EVT is set only once for a set of events and might be cleared for
the very first QR_EC command issued after SCI_EVT is set. EC firmware on
such platforms will return 0x00 to indicate "no outstanding event". Thus
after seeing an SCI_EVT indication, EC driver need to fetch events until
0x00 returned (see acpi_ec_clear()).
Issue 1 - acpi_ec_submit_query():
It's reported on Samsung laptops that SCI_EVT isn't checked when the
transactions are advanced in ec_poll(), which leads to SCI_EVT triggering
source lost:
If no EC GPE IRQs are arrived after that, EC driver cannot detect this
event and handle it.
See comment 244/247 for kernel bugzilla 44161.
This patch fixes this issue by moving SCI_EVT checks into
advance_transaction(). So that SCI_EVT is checked each time we are going to
handle the EC firmware indications. And this check will happen for both IRQ
context and task context.
Since after doing that, SCI_EVT is also checked after completing a
transaction, ec_check_sci() and ec_check_sci_sync() can be removed.
Issue 2 - acpi_ec_complete_query():
We expect to clear EC_FLAGS_QUERY_PENDING to allow queuing another draining
QR_EC after writing a QR_EC command and before reading the event. After
reading the event, SCI_EVT might be cleared by the firmware, thus it may
not be possible to queue such a draining QR_EC at that time.
But putting the EC_FLAGS_QUERY_PENDING clearing code after
start_transaction() is wrong as there are chances that after
start_transaction(), QR_EC can fail to be sent. If this happens,
EC_FLAG_QUERY_PENDING will be cleared earlier. As a consequence, the
draining QR_EC will also be queued earlier than expected.
This patch also moves this code into advance_transaction() where QR_EC is
just sent (ACPI_EC_COMMAND_POLL flagged) to fix this issue.
Notes:
1. After introducing the 2 SCI_EVT related handlings into
advance_transaction(), a next QR_EC can be queued right after writing
the current QR_EC command and before reading the event. But this still
hasn't implemented the draining behavior as the draining support
requires:
If a previous returned event value isn't 0x00, a draining QR_EC need
to be issued even when SCI_EVT isn't set.
2. In this patch, acpi_os_execute() is also converted into a seperate work
item to avoid invoking kmalloc() in the atomic context. We can do this
because of the previous global lock fix.
3. Originally, EC_FLAGS_EVENT_PENDING is also used to avoid queuing up
multiple work items (created by acpi_os_execute()), this can be covered
by only using a single work item. But this patch still keeps this flag
as there are different usages in the driver initialization steps relying
on this flag.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-by: Kieran Clancy <clancy.kieran@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-14 14:28:47 +03:00
struct work_struct work ;
2010-07-16 15:11:31 +04:00
} ;
extern struct acpi_ec * first_ec ;
2013-12-17 13:32:14 +04:00
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
/* External interfaces use first EC only, so remember */
typedef int ( * acpi_ec_query_func ) ( void * data ) ;
2009-03-25 01:49:48 +03:00
int acpi_ec_init ( void ) ;
2009-03-13 21:08:26 +03:00
int acpi_ec_ecdt_probe ( void ) ;
int acpi_boot_ec_enable ( void ) ;
2010-04-09 03:40:38 +04:00
void acpi_ec_block_transactions ( void ) ;
void acpi_ec_unblock_transactions ( void ) ;
void acpi_ec_unblock_transactions_early ( void ) ;
2013-12-17 13:32:14 +04:00
int acpi_ec_add_query_handler ( struct acpi_ec * ec , u8 query_bit ,
acpi_handle handle , acpi_ec_query_func func ,
void * data ) ;
void acpi_ec_remove_query_handler ( struct acpi_ec * ec , u8 query_bit ) ;
2009-03-13 21:08:26 +03:00
/*--------------------------------------------------------------------------
Suspend / Resume
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2015-03-24 17:02:39 +03:00
# ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT
2009-03-13 21:08:26 +03:00
extern int acpi_sleep_init ( void ) ;
2015-03-24 17:02:39 +03:00
# else
static inline int acpi_sleep_init ( void ) { return - ENXIO ; }
# endif
2009-03-25 01:50:14 +03:00
# ifdef CONFIG_ACPI_SLEEP
int acpi_sleep_proc_init ( void ) ;
2011-01-07 03:43:44 +03:00
int suspend_nvs_alloc ( void ) ;
void suspend_nvs_free ( void ) ;
int suspend_nvs_save ( void ) ;
void suspend_nvs_restore ( void ) ;
2009-03-25 01:50:14 +03:00
# else
static inline int acpi_sleep_proc_init ( void ) { return 0 ; }
2011-01-07 03:43:44 +03:00
static inline int suspend_nvs_alloc ( void ) { return 0 ; }
static inline void suspend_nvs_free ( void ) { }
2011-01-13 00:03:20 +03:00
static inline int suspend_nvs_save ( void ) { return 0 ; }
2011-01-07 03:43:44 +03:00
static inline void suspend_nvs_restore ( void ) { }
2009-03-25 01:50:14 +03:00
# endif
2010-07-16 15:11:31 +04:00
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
According to Matthew Garrett, "Windows 8 leaves backlight control up
to individual graphics drivers rather than making ACPI calls itself.
There's plenty of evidence to suggest that the Intel driver for
Windows [8] doesn't use the ACPI interface, including the fact that
it's broken on a bunch of machines when the OS claims to support
Windows 8. The simplest thing to do appears to be to disable the
ACPI backlight interface on these systems".
There's a problem with that approach, however, because simply
avoiding to register the ACPI backlight interface if the firmware
calls _OSI for Windows 8 may not work in the following situations:
(1) The ACPI backlight interface actually works on the given system
and the i915 driver is not loaded (e.g. another graphics driver
is used).
(2) The ACPI backlight interface doesn't work on the given system,
but there is a vendor platform driver that will register its
own, equally broken, backlight interface if not prevented from
doing so by the ACPI subsystem.
Therefore we need to allow the ACPI backlight interface to be
registered until the i915 driver is loaded which then will unregister
it if the firmware has called _OSI for Windows 8 (or will register
the ACPI video driver without backlight support if not already
present).
For this reason, introduce an alternative function for registering
ACPI video, acpi_video_register_with_quirks(), that will check
whether or not the ACPI video driver has already been registered
and whether or not the backlight Windows 8 quirk has to be applied.
If the quirk has to be applied, it will block the ACPI backlight
support and either unregister the backlight interface if the ACPI
video driver has already been registered, or register the ACPI
video driver without the backlight interface otherwise. Make
the i915 driver use acpi_video_register_with_quirks() instead of
acpi_video_register() in i915_driver_load().
This change is based on earlier patches from Matthew Garrett,
Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's.
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Tested-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-18 04:08:06 +04:00
/*--------------------------------------------------------------------------
Video
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
# if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE)
2013-10-11 17:27:45 +04:00
bool acpi_osi_is_win8 ( void ) ;
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
According to Matthew Garrett, "Windows 8 leaves backlight control up
to individual graphics drivers rather than making ACPI calls itself.
There's plenty of evidence to suggest that the Intel driver for
Windows [8] doesn't use the ACPI interface, including the fact that
it's broken on a bunch of machines when the OS claims to support
Windows 8. The simplest thing to do appears to be to disable the
ACPI backlight interface on these systems".
There's a problem with that approach, however, because simply
avoiding to register the ACPI backlight interface if the firmware
calls _OSI for Windows 8 may not work in the following situations:
(1) The ACPI backlight interface actually works on the given system
and the i915 driver is not loaded (e.g. another graphics driver
is used).
(2) The ACPI backlight interface doesn't work on the given system,
but there is a vendor platform driver that will register its
own, equally broken, backlight interface if not prevented from
doing so by the ACPI subsystem.
Therefore we need to allow the ACPI backlight interface to be
registered until the i915 driver is loaded which then will unregister
it if the firmware has called _OSI for Windows 8 (or will register
the ACPI video driver without backlight support if not already
present).
For this reason, introduce an alternative function for registering
ACPI video, acpi_video_register_with_quirks(), that will check
whether or not the ACPI video driver has already been registered
and whether or not the backlight Windows 8 quirk has to be applied.
If the quirk has to be applied, it will block the ACPI backlight
support and either unregister the backlight interface if the ACPI
video driver has already been registered, or register the ACPI
video driver without the backlight interface otherwise. Make
the i915 driver use acpi_video_register_with_quirks() instead of
acpi_video_register() in i915_driver_load().
This change is based on earlier patches from Matthew Garrett,
Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's.
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Tested-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-18 04:08:06 +04:00
# endif
ACPI: Add support for device specific properties
Device Tree is used in many embedded systems to describe the system
configuration to the OS. It supports attaching properties or name-value
pairs to the devices it describe. With these properties one can pass
additional information to the drivers that would not be available
otherwise.
ACPI is another configuration mechanism (among other things) typically
seen, but not limited to, x86 machines. ACPI allows passing arbitrary
data from methods but there has not been mechanism equivalent to Device
Tree until the introduction of _DSD in the recent publication of the
ACPI 5.1 specification.
In order to facilitate ACPI usage in systems where Device Tree is
typically used, it would be beneficial to standardize a way to retrieve
Device Tree style properties from ACPI devices, which is what we do in
this patch.
If a given device described in ACPI namespace wants to export properties it
must implement _DSD method (Device Specific Data, introduced with ACPI 5.1)
that returns the properties in a package of packages. For example:
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"name1", <VALUE1>},
Package () {"name2", <VALUE2>},
...
}
})
The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301
and is documented in the ACPI 5.1 companion document called "_DSD
Implementation Guide" [1], [2].
We add several helper functions that can be used to extract these
properties and convert them to different Linux data types.
The ultimate goal is that we only have one device property API that
retrieves the requested properties from Device Tree or from ACPI
transparent to the caller.
[1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
[2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 15:33:55 +04:00
/*--------------------------------------------------------------------------
Device properties
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
void acpi_init_properties ( struct acpi_device * adev ) ;
void acpi_free_properties ( struct acpi_device * adev ) ;
2010-07-16 15:11:31 +04:00
# endif /* _ACPI_INTERNAL_H_ */
