linux/mm/mremap.c

1113 lines
30 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* mm/mremap.c
*
* (C) Copyright 1996 Linus Torvalds
*
* Address space accounting code <alan@lxorguk.ukuu.org.uk>
* (C) Copyright 2002 Red Hat Inc, All Rights Reserved
*/
#include <linux/mm.h>
#include <linux/mm_inline.h>
#include <linux/hugetlb.h>
#include <linux/shm.h>
ksm: prevent mremap move poisoning KSM's scan allows for user pages to be COWed or unmapped at any time, without requiring any notification. But its stable tree does assume that when it finds a KSM page where it placed a KSM page, then it is the same KSM page that it placed there. mremap move could break that assumption: if an area containing a KSM page was unmapped, then an area containing a different KSM page was moved with mremap into the place of the original, before KSM's scan came around to notice. That could then poison a node of the stable tree, so that memcmps would "lie" and upset the ordering of the tree. Probably noone will ever need mremap move on a VM_MERGEABLE area; except that prohibiting it would make trouble for schemes in which we try making everything VM_MERGEABLE e.g. for testing: an mremap which normally works would then fail mysteriously. There's no need to go to any trouble, such as re-sorting KSM's list of rmap_items to match the new layout: simply unmerge the area to COW all its KSM pages before moving, but leave VM_MERGEABLE on so that they're remerged later. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 04:02:05 +04:00
#include <linux/ksm.h>
#include <linux/mman.h>
#include <linux/swap.h>
#include <linux/capability.h>
#include <linux/fs.h>
#include <linux/swapops.h>
#include <linux/highmem.h>
#include <linux/security.h>
#include <linux/syscalls.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 02:46:29 +04:00
#include <linux/mmu_notifier.h>
#include <linux/uaccess.h>
#include <linux/userfaultfd_k.h>
#include <linux/mempolicy.h>
#include <asm/cacheflush.h>
#include <asm/tlb.h>
#include <asm/pgalloc.h>
#include "internal.h"
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
static pud_t *get_old_pud(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pgd = pgd_offset(mm, addr);
if (pgd_none_or_clear_bad(pgd))
return NULL;
p4d = p4d_offset(pgd, addr);
if (p4d_none_or_clear_bad(p4d))
return NULL;
pud = pud_offset(p4d, addr);
if (pud_none_or_clear_bad(pud))
return NULL;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
return pud;
}
static pmd_t *get_old_pmd(struct mm_struct *mm, unsigned long addr)
{
pud_t *pud;
pmd_t *pmd;
pud = get_old_pud(mm, addr);
if (!pud)
return NULL;
pmd = pmd_offset(pud, addr);
thp: mremap support and TLB optimization This adds THP support to mremap (decreases the number of split_huge_page() calls). Here are also some benchmarks with a proggy like this: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <sys/time.h> #define SIZE (5UL*1024*1024*1024) int main() { static struct timeval oldstamp, newstamp; long diffsec; char *p, *p2, *p3, *p4; if (posix_memalign((void **)&p, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p2, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p3, 2*1024*1024, 4096)) perror("memalign"), exit(1); memset(p, 0xff, SIZE); memset(p2, 0xff, SIZE); memset(p3, 0x77, 4096); gettimeofday(&oldstamp, NULL); p4 = mremap(p, SIZE, SIZE, MREMAP_FIXED|MREMAP_MAYMOVE, p3); gettimeofday(&newstamp, NULL); diffsec = newstamp.tv_sec - oldstamp.tv_sec; diffsec = newstamp.tv_usec - oldstamp.tv_usec + 1000000 * diffsec; printf("usec %ld\n", diffsec); if (p == MAP_FAILED || p4 != p3) //if (p == MAP_FAILED) perror("mremap"), exit(1); if (memcmp(p4, p2, SIZE)) printf("mremap bug\n"), exit(1); printf("ok\n"); return 0; } === THP on Performance counter stats for './largepage13' (3 runs): 69195836 dTLB-loads ( +- 3.546% ) (scaled from 50.30%) 60708 dTLB-load-misses ( +- 11.776% ) (scaled from 52.62%) 676266476 dTLB-stores ( +- 5.654% ) (scaled from 69.54%) 29856 dTLB-store-misses ( +- 4.081% ) (scaled from 89.22%) 1055848782 iTLB-loads ( +- 4.526% ) (scaled from 80.18%) 8689 iTLB-load-misses ( +- 2.987% ) (scaled from 58.20%) 7.314454164 seconds time elapsed ( +- 0.023% ) THP off Performance counter stats for './largepage13' (3 runs): 1967379311 dTLB-loads ( +- 0.506% ) (scaled from 60.59%) 9238687 dTLB-load-misses ( +- 22.547% ) (scaled from 61.87%) 2014239444 dTLB-stores ( +- 0.692% ) (scaled from 60.40%) 3312335 dTLB-store-misses ( +- 7.304% ) (scaled from 67.60%) 6764372065 iTLB-loads ( +- 0.925% ) (scaled from 79.00%) 8202 iTLB-load-misses ( +- 0.475% ) (scaled from 70.55%) 9.693655243 seconds time elapsed ( +- 0.069% ) grep thp /proc/vmstat thp_fault_alloc 35849 thp_fault_fallback 0 thp_collapse_alloc 3 thp_collapse_alloc_failed 0 thp_split 0 thp_split 0 confirms no thp split despite plenty of hugepages allocated. The measurement of only the mremap time (so excluding the 3 long memset and final long 10GB memory accessing memcmp): THP on usec 14824 usec 14862 usec 14859 THP off usec 256416 usec 255981 usec 255847 With an older kernel without the mremap optimizations (the below patch optimizes the non THP version too). THP on usec 392107 usec 390237 usec 404124 THP off usec 444294 usec 445237 usec 445820 I guess with a threaded program that sends more IPI on large SMP it'd create an even larger difference. All debug options are off except DEBUG_VM to avoid skewing the results. The only problem for native 2M mremap like it happens above both the source and destination address must be 2M aligned or the hugepmd can't be moved without a split but that is an hardware limitation. [akpm@linux-foundation.org: coding-style nitpicking] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 04:08:30 +04:00
if (pmd_none(*pmd))
return NULL;
return pmd;
}
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
static pud_t *alloc_new_pud(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr)
{
pgd_t *pgd;
p4d_t *p4d;
pgd = pgd_offset(mm, addr);
p4d = p4d_alloc(mm, pgd, addr);
if (!p4d)
return NULL;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
return pud_alloc(mm, p4d, addr);
}
static pmd_t *alloc_new_pmd(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr)
{
pud_t *pud;
pmd_t *pmd;
pud = alloc_new_pud(mm, vma, addr);
if (!pud)
return NULL;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
return NULL;
VM_BUG_ON(pmd_trans_huge(*pmd));
return pmd;
}
static void take_rmap_locks(struct vm_area_struct *vma)
{
if (vma->vm_file)
i_mmap_lock_write(vma->vm_file->f_mapping);
if (vma->anon_vma)
anon_vma_lock_write(vma->anon_vma);
}
static void drop_rmap_locks(struct vm_area_struct *vma)
{
if (vma->anon_vma)
anon_vma_unlock_write(vma->anon_vma);
if (vma->vm_file)
i_mmap_unlock_write(vma->vm_file->f_mapping);
}
static pte_t move_soft_dirty_pte(pte_t pte)
{
/*
* Set soft dirty bit so we can notice
* in userspace the ptes were moved.
*/
#ifdef CONFIG_MEM_SOFT_DIRTY
if (pte_present(pte))
pte = pte_mksoft_dirty(pte);
else if (is_swap_pte(pte))
pte = pte_swp_mksoft_dirty(pte);
#endif
return pte;
}
static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
unsigned long old_addr, unsigned long old_end,
struct vm_area_struct *new_vma, pmd_t *new_pmd,
unsigned long new_addr, bool need_rmap_locks)
{
struct mm_struct *mm = vma->vm_mm;
pte_t *old_pte, *new_pte, pte;
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
spinlock_t *old_ptl, *new_ptl;
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
bool force_flush = false;
unsigned long len = old_end - old_addr;
/*
* When need_rmap_locks is true, we take the i_mmap_rwsem and anon_vma
* locks to ensure that rmap will always observe either the old or the
* new ptes. This is the easiest way to avoid races with
* truncate_pagecache(), page migration, etc...
*
* When need_rmap_locks is false, we use other ways to avoid
* such races:
*
* - During exec() shift_arg_pages(), we use a specially tagged vma
* which rmap call sites look for using vma_is_temporary_stack().
*
* - During mremap(), new_vma is often known to be placed after vma
* in rmap traversal order. This ensures rmap will always observe
* either the old pte, or the new pte, or both (the page table locks
* serialize access to individual ptes, but only rmap traversal
* order guarantees that we won't miss both the old and new ptes).
*/
if (need_rmap_locks)
take_rmap_locks(vma);
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
/*
* We don't have to worry about the ordering of src and dst
* pte locks because exclusive mmap_lock prevents deadlock.
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
*/
old_pte = pte_offset_map_lock(mm, old_pmd, old_addr, &old_ptl);
new_pte = pte_offset_map(new_pmd, new_addr);
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
new_ptl = pte_lockptr(mm, new_pmd);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 23:31:52 +03:00
flush_tlb_batched_pending(vma->vm_mm);
arch_enter_lazy_mmu_mode();
for (; old_addr < old_end; old_pte++, old_addr += PAGE_SIZE,
new_pte++, new_addr += PAGE_SIZE) {
if (pte_none(*old_pte))
continue;
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
pte = ptep_get_and_clear(mm, old_addr, old_pte);
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
/*
* If we are remapping a valid PTE, make sure
* to flush TLB before we drop the PTL for the
* PTE.
*
* NOTE! Both old and new PTL matter: the old one
* for racing with page_mkclean(), the new one to
* make sure the physical page stays valid until
* the TLB entry for the old mapping has been
* flushed.
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
*/
if (pte_present(pte))
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
force_flush = true;
pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr);
pte = move_soft_dirty_pte(pte);
set_pte_at(mm, new_addr, new_pte, pte);
}
arch_leave_lazy_mmu_mode();
if (force_flush)
flush_tlb_range(vma, old_end - len, old_end);
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
pte_unmap(new_pte - 1);
pte_unmap_unlock(old_pte - 1, old_ptl);
if (need_rmap_locks)
drop_rmap_locks(vma);
}
#ifndef arch_supports_page_table_move
#define arch_supports_page_table_move arch_supports_page_table_move
static inline bool arch_supports_page_table_move(void)
{
return IS_ENABLED(CONFIG_HAVE_MOVE_PMD) ||
IS_ENABLED(CONFIG_HAVE_MOVE_PUD);
}
#endif
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
#ifdef CONFIG_HAVE_MOVE_PMD
static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr,
mm/mremap: it is sure to have enough space when extent meets requirement Patch series "mm/mremap: cleanup move_page_tables() a little", v5. move_page_tables() tries to move page table by PMD or PTE. The root reason is if it tries to move PMD, both old and new range should be PMD aligned. But current code calculate old range and new range separately. This leads to some redundant check and calculation. This cleanup tries to consolidate the range check in one place to reduce some extra range handling. This patch (of 3): old_end is passed to these two functions to check whether there is enough space to do the move, while this check is done before invoking these functions. These two functions only would be invoked when extent meets the requirement and there is one check before invoking these functions: if (extent > old_end - old_addr) extent = old_end - old_addr; This implies (old_end - old_addr) won't fail the check in these two functions. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Thomas Hellstrom (VMware) <thomas_os@shipmail.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Peter Xu <peterx@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: http://lkml.kernel.org/r/20200710092835.56368-1-richard.weiyang@linux.alibaba.com Link: http://lkml.kernel.org/r/20200710092835.56368-2-richard.weiyang@linux.alibaba.com Link: http://lkml.kernel.org/r/20200708095028.41706-1-richard.weiyang@linux.alibaba.com Link: http://lkml.kernel.org/r/20200708095028.41706-2-richard.weiyang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:23:40 +03:00
unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd)
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
{
spinlock_t *old_ptl, *new_ptl;
struct mm_struct *mm = vma->vm_mm;
pmd_t pmd;
if (!arch_supports_page_table_move())
return false;
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
/*
* The destination pmd shouldn't be established, free_pgtables()
mm: document warning in move_normal_pmd() and make it warn only once Naresh Kamboju reported that the LTP tests can cause warnings on i386 going back all the way to v5.0, and bisected it to commit 2c91bd4a4e2e ("mm: speed up mremap by 20x on large regions"). The warning in move_normal_pmd() is actually mostly correct, but we have a very unusual special case at process creation time, when we may move the stack down with an overlapping mode (kind of like a "memmove()" except using the page tables). And when you have just the right condition of "move a large initial stack by the right alignment in the end, but with the early part of the move being only page-aligned", we'll be in a situation where we're trying to move a normal PMD entry on top of an already existing - but now empty - PMD entry. The warning is still worth having, in case it ever triggers other cases, and perhaps as a reminder that we could do the stack move case more efficiently (although it's clearly rare enough that it probably doesn't matter). But make it do WARN_ON_ONCE(), so that you can't flood the logs with it. And add a *big* comment above it to explain and remind us what's going on, because it took some figuring out to see how this could trigger. Kudos to Joel Fernandes for debugging this. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Debugged-and-acked-by: Joel Fernandes <joel@joelfernandes.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-13 21:37:39 +03:00
* should have released it.
*
* However, there's a case during execve() where we use mremap
* to move the initial stack, and in that case the target area
* may overlap the source area (always moving down).
*
* If everything is PMD-aligned, that works fine, as moving
* each pmd down will clear the source pmd. But if we first
* have a few 4kB-only pages that get moved down, and then
* hit the "now the rest is PMD-aligned, let's do everything
* one pmd at a time", we will still have the old (now empty
* of any 4kB pages, but still there) PMD in the page table
* tree.
*
* Warn on it once - because we really should try to figure
* out how to do this better - but then say "I won't move
* this pmd".
*
* One alternative might be to just unmap the target pmd at
* this point, and verify that it really is empty. We'll see.
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
*/
mm: document warning in move_normal_pmd() and make it warn only once Naresh Kamboju reported that the LTP tests can cause warnings on i386 going back all the way to v5.0, and bisected it to commit 2c91bd4a4e2e ("mm: speed up mremap by 20x on large regions"). The warning in move_normal_pmd() is actually mostly correct, but we have a very unusual special case at process creation time, when we may move the stack down with an overlapping mode (kind of like a "memmove()" except using the page tables). And when you have just the right condition of "move a large initial stack by the right alignment in the end, but with the early part of the move being only page-aligned", we'll be in a situation where we're trying to move a normal PMD entry on top of an already existing - but now empty - PMD entry. The warning is still worth having, in case it ever triggers other cases, and perhaps as a reminder that we could do the stack move case more efficiently (although it's clearly rare enough that it probably doesn't matter). But make it do WARN_ON_ONCE(), so that you can't flood the logs with it. And add a *big* comment above it to explain and remind us what's going on, because it took some figuring out to see how this could trigger. Kudos to Joel Fernandes for debugging this. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Debugged-and-acked-by: Joel Fernandes <joel@joelfernandes.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-13 21:37:39 +03:00
if (WARN_ON_ONCE(!pmd_none(*new_pmd)))
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
return false;
/*
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
*/
old_ptl = pmd_lock(vma->vm_mm, old_pmd);
new_ptl = pmd_lockptr(mm, new_pmd);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
/* Clear the pmd */
pmd = *old_pmd;
pmd_clear(old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
pmd_populate(mm, new_pmd, pmd_pgtable(pmd));
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
return true;
}
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
#else
static inline bool move_normal_pmd(struct vm_area_struct *vma,
unsigned long old_addr, unsigned long new_addr, pmd_t *old_pmd,
pmd_t *new_pmd)
{
return false;
}
#endif
#if CONFIG_PGTABLE_LEVELS > 2 && defined(CONFIG_HAVE_MOVE_PUD)
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pud_t *old_pud, pud_t *new_pud)
{
spinlock_t *old_ptl, *new_ptl;
struct mm_struct *mm = vma->vm_mm;
pud_t pud;
if (!arch_supports_page_table_move())
return false;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
/*
* The destination pud shouldn't be established, free_pgtables()
* should have released it.
*/
if (WARN_ON_ONCE(!pud_none(*new_pud)))
return false;
/*
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
old_ptl = pud_lock(vma->vm_mm, old_pud);
new_ptl = pud_lockptr(mm, new_pud);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
/* Clear the pud */
pud = *old_pud;
pud_clear(old_pud);
VM_BUG_ON(!pud_none(*new_pud));
pud_populate(mm, new_pud, pud_pgtable(pud));
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
flush_tlb_range(vma, old_addr, old_addr + PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
return true;
}
#else
static inline bool move_normal_pud(struct vm_area_struct *vma,
unsigned long old_addr, unsigned long new_addr, pud_t *old_pud,
pud_t *new_pud)
{
return false;
}
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
#endif
#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
static bool move_huge_pud(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pud_t *old_pud, pud_t *new_pud)
{
spinlock_t *old_ptl, *new_ptl;
struct mm_struct *mm = vma->vm_mm;
pud_t pud;
/*
* The destination pud shouldn't be established, free_pgtables()
* should have released it.
*/
if (WARN_ON_ONCE(!pud_none(*new_pud)))
return false;
/*
* We don't have to worry about the ordering of src and dst
* ptlocks because exclusive mmap_lock prevents deadlock.
*/
old_ptl = pud_lock(vma->vm_mm, old_pud);
new_ptl = pud_lockptr(mm, new_pud);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
/* Clear the pud */
pud = *old_pud;
pud_clear(old_pud);
VM_BUG_ON(!pud_none(*new_pud));
/* Set the new pud */
/* mark soft_ditry when we add pud level soft dirty support */
set_pud_at(mm, new_addr, new_pud, pud);
flush_pud_tlb_range(vma, old_addr, old_addr + HPAGE_PUD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
return true;
}
#else
static bool move_huge_pud(struct vm_area_struct *vma, unsigned long old_addr,
unsigned long new_addr, pud_t *old_pud, pud_t *new_pud)
{
WARN_ON_ONCE(1);
return false;
}
#endif
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
enum pgt_entry {
NORMAL_PMD,
HPAGE_PMD,
NORMAL_PUD,
HPAGE_PUD,
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
};
/*
* Returns an extent of the corresponding size for the pgt_entry specified if
* valid. Else returns a smaller extent bounded by the end of the source and
* destination pgt_entry.
*/
static __always_inline unsigned long get_extent(enum pgt_entry entry,
unsigned long old_addr, unsigned long old_end,
unsigned long new_addr)
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
{
unsigned long next, extent, mask, size;
switch (entry) {
case HPAGE_PMD:
case NORMAL_PMD:
mask = PMD_MASK;
size = PMD_SIZE;
break;
case HPAGE_PUD:
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
case NORMAL_PUD:
mask = PUD_MASK;
size = PUD_SIZE;
break;
default:
BUILD_BUG();
break;
}
next = (old_addr + size) & mask;
/* even if next overflowed, extent below will be ok */
extent = next - old_addr;
if (extent > old_end - old_addr)
extent = old_end - old_addr;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
next = (new_addr + size) & mask;
if (extent > next - new_addr)
extent = next - new_addr;
return extent;
}
/*
* Attempts to speedup the move by moving entry at the level corresponding to
* pgt_entry. Returns true if the move was successful, else false.
*/
static bool move_pgt_entry(enum pgt_entry entry, struct vm_area_struct *vma,
unsigned long old_addr, unsigned long new_addr,
void *old_entry, void *new_entry, bool need_rmap_locks)
{
bool moved = false;
/* See comment in move_ptes() */
if (need_rmap_locks)
take_rmap_locks(vma);
switch (entry) {
case NORMAL_PMD:
moved = move_normal_pmd(vma, old_addr, new_addr, old_entry,
new_entry);
break;
case NORMAL_PUD:
moved = move_normal_pud(vma, old_addr, new_addr, old_entry,
new_entry);
break;
case HPAGE_PMD:
moved = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
move_huge_pmd(vma, old_addr, new_addr, old_entry,
new_entry);
break;
case HPAGE_PUD:
moved = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
move_huge_pud(vma, old_addr, new_addr, old_entry,
new_entry);
break;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
default:
WARN_ON_ONCE(1);
break;
}
if (need_rmap_locks)
drop_rmap_locks(vma);
return moved;
}
unsigned long move_page_tables(struct vm_area_struct *vma,
unsigned long old_addr, struct vm_area_struct *new_vma,
unsigned long new_addr, unsigned long len,
bool need_rmap_locks)
{
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
unsigned long extent, old_end;
struct mmu_notifier_range range;
pmd_t *old_pmd, *new_pmd;
pud_t *old_pud, *new_pud;
if (!len)
return 0;
old_end = old_addr + len;
if (is_vm_hugetlb_page(vma))
return move_hugetlb_page_tables(vma, new_vma, old_addr,
new_addr, len);
mm: hugetlb: considering PMD sharing when flushing cache/TLBs This patchset fixes some cache flushing issues if PMD sharing is possible for hugetlb pages, which were found by code inspection. Meanwhile Mike found the flush_cache_page() can not cover the whole size of a hugetlb page on some architectures [1], so I added a new patch 3 to fix this issue, since I found only try_to_unmap_one() and try_to_migrate_one() need to fix after some investigation. [1] https://lore.kernel.org/linux-mm/064da3bb-5b4b-7332-a722-c5a541128705@oracle.com/ This patch (of 3): When moving hugetlb page tables, the cache flushing is called in move_page_tables() without considering the shared PMDs, which may be cause cache issues on some architectures. Thus we should move the hugetlb cache flushing into move_hugetlb_page_tables() with considering the shared PMDs ranges, calculated by adjust_range_if_pmd_sharing_possible(). Meanwhile also expanding the TLBs flushing range in case of shared PMDs. Note this is discovered via code inspection, and did not meet a real problem in practice so far. Link: https://lkml.kernel.org/r/cover.1651056365.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/0443c8cf20db554d3ff4b439b30e0ff26c0181dd.1651056365.git.baolin.wang@linux.alibaba.com Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Mina Almasry <almasrymina@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:52 +03:00
flush_cache_range(vma, old_addr, old_end);
mmu_notifier_range_init(&range, MMU_NOTIFY_UNMAP, 0, vma->vm_mm,
mm/mmu_notifier: contextual information for event triggering invalidation CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 03:20:49 +03:00
old_addr, old_end);
mmu_notifier_invalidate_range_start(&range);
2011-11-01 04:08:26 +04:00
for (; old_addr < old_end; old_addr += extent, new_addr += extent) {
cond_resched();
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
/*
* If extent is PUD-sized try to speed up the move by moving at the
* PUD level if possible.
*/
extent = get_extent(NORMAL_PUD, old_addr, old_end, new_addr);
old_pud = get_old_pud(vma->vm_mm, old_addr);
if (!old_pud)
continue;
new_pud = alloc_new_pud(vma->vm_mm, vma, new_addr);
if (!new_pud)
break;
if (pud_trans_huge(*old_pud) || pud_devmap(*old_pud)) {
if (extent == HPAGE_PUD_SIZE) {
move_pgt_entry(HPAGE_PUD, vma, old_addr, new_addr,
old_pud, new_pud, need_rmap_locks);
/* We ignore and continue on error? */
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
continue;
}
} else if (IS_ENABLED(CONFIG_HAVE_MOVE_PUD) && extent == PUD_SIZE) {
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
if (move_pgt_entry(NORMAL_PUD, vma, old_addr, new_addr,
mm/mremap: hold the rmap lock in write mode when moving page table entries. To avoid a race between rmap walk and mremap, mremap does take_rmap_locks(). The lock was taken to ensure that rmap walk don't miss a page table entry due to PTE moves via move_pagetables(). The kernel does further optimization of this lock such that if we are going to find the newly added vma after the old vma, the rmap lock is not taken. This is because rmap walk would find the vmas in the same order and if we don't find the page table attached to older vma we would find it with the new vma which we would iterate later. As explained in commit eb66ae030829 ("mremap: properly flush TLB before releasing the page") mremap is special in that it doesn't take ownership of the page. The optimized version for PUD/PMD aligned mremap also doesn't hold the ptl lock. This can result in stale TLB entries as show below. This patch updates the rmap locking requirement in mremap to handle the race condition explained below with optimized mremap:: Optmized PMD move CPU 1 CPU 2 CPU 3 mremap(old_addr, new_addr) page_shrinker/try_to_unmap_one mmap_write_lock_killable() addr = old_addr lock(pte_ptl) lock(pmd_ptl) pmd = *old_pmd pmd_clear(old_pmd) flush_tlb_range(old_addr) *new_pmd = pmd *new_addr = 10; and fills TLB with new addr and old pfn unlock(pmd_ptl) ptep_clear_flush() old pfn is free. Stale TLB entry Optimized PUD move also suffers from a similar race. Both the above race condition can be fixed if we force mremap path to take rmap lock. Link: https://lkml.kernel.org/r/20210616045239.370802-7-aneesh.kumar@linux.ibm.com Fixes: 2c91bd4a4e2e ("mm: speed up mremap by 20x on large regions") Fixes: c49dd3401802 ("mm: speedup mremap on 1GB or larger regions") Link: https://lore.kernel.org/linux-mm/CAHk-=wgXVR04eBNtxQfevontWnP6FDm+oj5vauQXP3S-huwbPw@mail.gmail.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 04:10:15 +03:00
old_pud, new_pud, true))
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
continue;
}
extent = get_extent(NORMAL_PMD, old_addr, old_end, new_addr);
old_pmd = get_old_pmd(vma->vm_mm, old_addr);
if (!old_pmd)
continue;
new_pmd = alloc_new_pmd(vma->vm_mm, vma, new_addr);
if (!new_pmd)
break;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd) ||
pmd_devmap(*old_pmd)) {
if (extent == HPAGE_PMD_SIZE &&
move_pgt_entry(HPAGE_PMD, vma, old_addr, new_addr,
old_pmd, new_pmd, need_rmap_locks))
continue;
split_huge_pmd(vma, old_pmd, old_addr);
if (pmd_trans_unstable(old_pmd))
continue;
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
} else if (IS_ENABLED(CONFIG_HAVE_MOVE_PMD) &&
extent == PMD_SIZE) {
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
/*
* If the extent is PMD-sized, try to speed the move by
* moving at the PMD level if possible.
*/
mm: speedup mremap on 1GB or larger regions Android needs to move large memory regions for garbage collection. The GC requires moving physical pages of multi-gigabyte heap using mremap. During this move, the application threads have to be paused for correctness. It is critical to keep this pause as short as possible to avoid jitters during user interaction. Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if the source and destination addresses are PUD-aligned. For CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD entries, since the PUD entry is “folded back” onto the PGD entry. Add HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't supported/tested can turn this off by not selecting the config. Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:07:30 +03:00
if (move_pgt_entry(NORMAL_PMD, vma, old_addr, new_addr,
mm/mremap: hold the rmap lock in write mode when moving page table entries. To avoid a race between rmap walk and mremap, mremap does take_rmap_locks(). The lock was taken to ensure that rmap walk don't miss a page table entry due to PTE moves via move_pagetables(). The kernel does further optimization of this lock such that if we are going to find the newly added vma after the old vma, the rmap lock is not taken. This is because rmap walk would find the vmas in the same order and if we don't find the page table attached to older vma we would find it with the new vma which we would iterate later. As explained in commit eb66ae030829 ("mremap: properly flush TLB before releasing the page") mremap is special in that it doesn't take ownership of the page. The optimized version for PUD/PMD aligned mremap also doesn't hold the ptl lock. This can result in stale TLB entries as show below. This patch updates the rmap locking requirement in mremap to handle the race condition explained below with optimized mremap:: Optmized PMD move CPU 1 CPU 2 CPU 3 mremap(old_addr, new_addr) page_shrinker/try_to_unmap_one mmap_write_lock_killable() addr = old_addr lock(pte_ptl) lock(pmd_ptl) pmd = *old_pmd pmd_clear(old_pmd) flush_tlb_range(old_addr) *new_pmd = pmd *new_addr = 10; and fills TLB with new addr and old pfn unlock(pmd_ptl) ptep_clear_flush() old pfn is free. Stale TLB entry Optimized PUD move also suffers from a similar race. Both the above race condition can be fixed if we force mremap path to take rmap lock. Link: https://lkml.kernel.org/r/20210616045239.370802-7-aneesh.kumar@linux.ibm.com Fixes: 2c91bd4a4e2e ("mm: speed up mremap by 20x on large regions") Fixes: c49dd3401802 ("mm: speedup mremap on 1GB or larger regions") Link: https://lore.kernel.org/linux-mm/CAHk-=wgXVR04eBNtxQfevontWnP6FDm+oj5vauQXP3S-huwbPw@mail.gmail.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 04:10:15 +03:00
old_pmd, new_pmd, true))
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
continue;
thp: mremap support and TLB optimization This adds THP support to mremap (decreases the number of split_huge_page() calls). Here are also some benchmarks with a proggy like this: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <sys/time.h> #define SIZE (5UL*1024*1024*1024) int main() { static struct timeval oldstamp, newstamp; long diffsec; char *p, *p2, *p3, *p4; if (posix_memalign((void **)&p, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p2, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p3, 2*1024*1024, 4096)) perror("memalign"), exit(1); memset(p, 0xff, SIZE); memset(p2, 0xff, SIZE); memset(p3, 0x77, 4096); gettimeofday(&oldstamp, NULL); p4 = mremap(p, SIZE, SIZE, MREMAP_FIXED|MREMAP_MAYMOVE, p3); gettimeofday(&newstamp, NULL); diffsec = newstamp.tv_sec - oldstamp.tv_sec; diffsec = newstamp.tv_usec - oldstamp.tv_usec + 1000000 * diffsec; printf("usec %ld\n", diffsec); if (p == MAP_FAILED || p4 != p3) //if (p == MAP_FAILED) perror("mremap"), exit(1); if (memcmp(p4, p2, SIZE)) printf("mremap bug\n"), exit(1); printf("ok\n"); return 0; } === THP on Performance counter stats for './largepage13' (3 runs): 69195836 dTLB-loads ( +- 3.546% ) (scaled from 50.30%) 60708 dTLB-load-misses ( +- 11.776% ) (scaled from 52.62%) 676266476 dTLB-stores ( +- 5.654% ) (scaled from 69.54%) 29856 dTLB-store-misses ( +- 4.081% ) (scaled from 89.22%) 1055848782 iTLB-loads ( +- 4.526% ) (scaled from 80.18%) 8689 iTLB-load-misses ( +- 2.987% ) (scaled from 58.20%) 7.314454164 seconds time elapsed ( +- 0.023% ) THP off Performance counter stats for './largepage13' (3 runs): 1967379311 dTLB-loads ( +- 0.506% ) (scaled from 60.59%) 9238687 dTLB-load-misses ( +- 22.547% ) (scaled from 61.87%) 2014239444 dTLB-stores ( +- 0.692% ) (scaled from 60.40%) 3312335 dTLB-store-misses ( +- 7.304% ) (scaled from 67.60%) 6764372065 iTLB-loads ( +- 0.925% ) (scaled from 79.00%) 8202 iTLB-load-misses ( +- 0.475% ) (scaled from 70.55%) 9.693655243 seconds time elapsed ( +- 0.069% ) grep thp /proc/vmstat thp_fault_alloc 35849 thp_fault_fallback 0 thp_collapse_alloc 3 thp_collapse_alloc_failed 0 thp_split 0 thp_split 0 confirms no thp split despite plenty of hugepages allocated. The measurement of only the mremap time (so excluding the 3 long memset and final long 10GB memory accessing memcmp): THP on usec 14824 usec 14862 usec 14859 THP off usec 256416 usec 255981 usec 255847 With an older kernel without the mremap optimizations (the below patch optimizes the non THP version too). THP on usec 392107 usec 390237 usec 404124 THP off usec 444294 usec 445237 usec 445820 I guess with a threaded program that sends more IPI on large SMP it'd create an even larger difference. All debug options are off except DEBUG_VM to avoid skewing the results. The only problem for native 2M mremap like it happens above both the source and destination address must be 2M aligned or the hugepmd can't be moved without a split but that is an hardware limitation. [akpm@linux-foundation.org: coding-style nitpicking] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 04:08:30 +04:00
}
mm: speed up mremap by 20x on large regions Android needs to mremap large regions of memory during memory management related operations. The mremap system call can be really slow if THP is not enabled. The bottleneck is move_page_tables, which is copying each pte at a time, and can be really slow across a large map. Turning on THP may not be a viable option, and is not for us. This patch speeds up the performance for non-THP system by copying at the PMD level when possible. The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap, the mremap completion times drops from 3.4-3.6 milliseconds to 144-160 microseconds. Before: Total mremap time for 1GB data: 3521942 nanoseconds. Total mremap time for 1GB data: 3449229 nanoseconds. Total mremap time for 1GB data: 3488230 nanoseconds. After: Total mremap time for 1GB data: 150279 nanoseconds. Total mremap time for 1GB data: 144665 nanoseconds. Total mremap time for 1GB data: 158708 nanoseconds. If THP is enabled the optimization is mostly skipped except in certain situations. [joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning] Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Michal Hocko <mhocko@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:38 +03:00
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:28:34 +03:00
if (pte_alloc(new_vma->vm_mm, new_pmd))
thp: mremap support and TLB optimization This adds THP support to mremap (decreases the number of split_huge_page() calls). Here are also some benchmarks with a proggy like this: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <sys/time.h> #define SIZE (5UL*1024*1024*1024) int main() { static struct timeval oldstamp, newstamp; long diffsec; char *p, *p2, *p3, *p4; if (posix_memalign((void **)&p, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p2, 2*1024*1024, SIZE)) perror("memalign"), exit(1); if (posix_memalign((void **)&p3, 2*1024*1024, 4096)) perror("memalign"), exit(1); memset(p, 0xff, SIZE); memset(p2, 0xff, SIZE); memset(p3, 0x77, 4096); gettimeofday(&oldstamp, NULL); p4 = mremap(p, SIZE, SIZE, MREMAP_FIXED|MREMAP_MAYMOVE, p3); gettimeofday(&newstamp, NULL); diffsec = newstamp.tv_sec - oldstamp.tv_sec; diffsec = newstamp.tv_usec - oldstamp.tv_usec + 1000000 * diffsec; printf("usec %ld\n", diffsec); if (p == MAP_FAILED || p4 != p3) //if (p == MAP_FAILED) perror("mremap"), exit(1); if (memcmp(p4, p2, SIZE)) printf("mremap bug\n"), exit(1); printf("ok\n"); return 0; } === THP on Performance counter stats for './largepage13' (3 runs): 69195836 dTLB-loads ( +- 3.546% ) (scaled from 50.30%) 60708 dTLB-load-misses ( +- 11.776% ) (scaled from 52.62%) 676266476 dTLB-stores ( +- 5.654% ) (scaled from 69.54%) 29856 dTLB-store-misses ( +- 4.081% ) (scaled from 89.22%) 1055848782 iTLB-loads ( +- 4.526% ) (scaled from 80.18%) 8689 iTLB-load-misses ( +- 2.987% ) (scaled from 58.20%) 7.314454164 seconds time elapsed ( +- 0.023% ) THP off Performance counter stats for './largepage13' (3 runs): 1967379311 dTLB-loads ( +- 0.506% ) (scaled from 60.59%) 9238687 dTLB-load-misses ( +- 22.547% ) (scaled from 61.87%) 2014239444 dTLB-stores ( +- 0.692% ) (scaled from 60.40%) 3312335 dTLB-store-misses ( +- 7.304% ) (scaled from 67.60%) 6764372065 iTLB-loads ( +- 0.925% ) (scaled from 79.00%) 8202 iTLB-load-misses ( +- 0.475% ) (scaled from 70.55%) 9.693655243 seconds time elapsed ( +- 0.069% ) grep thp /proc/vmstat thp_fault_alloc 35849 thp_fault_fallback 0 thp_collapse_alloc 3 thp_collapse_alloc_failed 0 thp_split 0 thp_split 0 confirms no thp split despite plenty of hugepages allocated. The measurement of only the mremap time (so excluding the 3 long memset and final long 10GB memory accessing memcmp): THP on usec 14824 usec 14862 usec 14859 THP off usec 256416 usec 255981 usec 255847 With an older kernel without the mremap optimizations (the below patch optimizes the non THP version too). THP on usec 392107 usec 390237 usec 404124 THP off usec 444294 usec 445237 usec 445820 I guess with a threaded program that sends more IPI on large SMP it'd create an even larger difference. All debug options are off except DEBUG_VM to avoid skewing the results. The only problem for native 2M mremap like it happens above both the source and destination address must be 2M aligned or the hugepmd can't be moved without a split but that is an hardware limitation. [akpm@linux-foundation.org: coding-style nitpicking] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 04:08:30 +04:00
break;
mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10 12:16:33 +03:00
move_ptes(vma, old_pmd, old_addr, old_addr + extent, new_vma,
new_pmd, new_addr, need_rmap_locks);
}
2011-11-01 04:08:26 +04:00
mmu_notifier_invalidate_range_end(&range);
return len + old_addr - old_end; /* how much done */
}
static unsigned long move_vma(struct vm_area_struct *vma,
unsigned long old_addr, unsigned long old_len,
unsigned long new_len, unsigned long new_addr,
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
bool *locked, unsigned long flags,
struct vm_userfaultfd_ctx *uf, struct list_head *uf_unmap)
{
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
long to_account = new_len - old_len;
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *new_vma;
unsigned long vm_flags = vma->vm_flags;
unsigned long new_pgoff;
unsigned long moved_len;
unsigned long account_start = 0;
unsigned long account_end = 0;
[PATCH] mm: update_hiwaters just in time update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:18 +03:00
unsigned long hiwater_vm;
mremap: check if it's possible to split original vma If original VMA can't be split at the desired address, do_munmap() will fail and leave both new-copied VMA and old VMA. De-facto it's MREMAP_DONTUNMAP behaviour, which is unexpected. Currently, it may fail such way for hugetlbfs and dax device mappings. Minimize such unpleasant situations to OOM by checking .may_split() before attempting to create a VMA copy. Link: https://lkml.kernel.org/r/20201013013416.390574-6-dima@arista.com Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:21 +03:00
int err = 0;
bool need_rmap_locks;
struct vma_iterator vmi;
/*
* We'd prefer to avoid failure later on in do_munmap:
* which may split one vma into three before unmapping.
*/
if (mm->map_count >= sysctl_max_map_count - 3)
return -ENOMEM;
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
if (unlikely(flags & MREMAP_DONTUNMAP))
to_account = new_len;
mremap: check if it's possible to split original vma If original VMA can't be split at the desired address, do_munmap() will fail and leave both new-copied VMA and old VMA. De-facto it's MREMAP_DONTUNMAP behaviour, which is unexpected. Currently, it may fail such way for hugetlbfs and dax device mappings. Minimize such unpleasant situations to OOM by checking .may_split() before attempting to create a VMA copy. Link: https://lkml.kernel.org/r/20201013013416.390574-6-dima@arista.com Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:21 +03:00
if (vma->vm_ops && vma->vm_ops->may_split) {
if (vma->vm_start != old_addr)
err = vma->vm_ops->may_split(vma, old_addr);
if (!err && vma->vm_end != old_addr + old_len)
err = vma->vm_ops->may_split(vma, old_addr + old_len);
if (err)
return err;
}
ksm: prevent mremap move poisoning KSM's scan allows for user pages to be COWed or unmapped at any time, without requiring any notification. But its stable tree does assume that when it finds a KSM page where it placed a KSM page, then it is the same KSM page that it placed there. mremap move could break that assumption: if an area containing a KSM page was unmapped, then an area containing a different KSM page was moved with mremap into the place of the original, before KSM's scan came around to notice. That could then poison a node of the stable tree, so that memcmps would "lie" and upset the ordering of the tree. Probably noone will ever need mremap move on a VM_MERGEABLE area; except that prohibiting it would make trouble for schemes in which we try making everything VM_MERGEABLE e.g. for testing: an mremap which normally works would then fail mysteriously. There's no need to go to any trouble, such as re-sorting KSM's list of rmap_items to match the new layout: simply unmerge the area to COW all its KSM pages before moving, but leave VM_MERGEABLE on so that they're remerged later. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 04:02:05 +04:00
/*
* Advise KSM to break any KSM pages in the area to be moved:
* it would be confusing if they were to turn up at the new
* location, where they happen to coincide with different KSM
* pages recently unmapped. But leave vma->vm_flags as it was,
* so KSM can come around to merge on vma and new_vma afterwards.
*/
err = ksm_madvise(vma, old_addr, old_addr + old_len,
MADV_UNMERGEABLE, &vm_flags);
if (err)
return err;
ksm: prevent mremap move poisoning KSM's scan allows for user pages to be COWed or unmapped at any time, without requiring any notification. But its stable tree does assume that when it finds a KSM page where it placed a KSM page, then it is the same KSM page that it placed there. mremap move could break that assumption: if an area containing a KSM page was unmapped, then an area containing a different KSM page was moved with mremap into the place of the original, before KSM's scan came around to notice. That could then poison a node of the stable tree, so that memcmps would "lie" and upset the ordering of the tree. Probably noone will ever need mremap move on a VM_MERGEABLE area; except that prohibiting it would make trouble for schemes in which we try making everything VM_MERGEABLE e.g. for testing: an mremap which normally works would then fail mysteriously. There's no need to go to any trouble, such as re-sorting KSM's list of rmap_items to match the new layout: simply unmerge the area to COW all its KSM pages before moving, but leave VM_MERGEABLE on so that they're remerged later. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 04:02:05 +04:00
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
if (vm_flags & VM_ACCOUNT) {
if (security_vm_enough_memory_mm(mm, to_account >> PAGE_SHIFT))
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
return -ENOMEM;
}
new_pgoff = vma->vm_pgoff + ((old_addr - vma->vm_start) >> PAGE_SHIFT);
new_vma = copy_vma(&vma, new_addr, new_len, new_pgoff,
&need_rmap_locks);
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
if (!new_vma) {
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
if (vm_flags & VM_ACCOUNT)
vm_unacct_memory(to_account >> PAGE_SHIFT);
return -ENOMEM;
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
}
moved_len = move_page_tables(vma, old_addr, new_vma, new_addr, old_len,
need_rmap_locks);
if (moved_len < old_len) {
err = -ENOMEM;
} else if (vma->vm_ops && vma->vm_ops->mremap) {
2021-04-30 08:57:48 +03:00
err = vma->vm_ops->mremap(new_vma);
}
if (unlikely(err)) {
/*
* On error, move entries back from new area to old,
* which will succeed since page tables still there,
* and then proceed to unmap new area instead of old.
*/
move_page_tables(new_vma, new_addr, vma, old_addr, moved_len,
true);
vma = new_vma;
old_len = new_len;
old_addr = new_addr;
new_addr = err;
} else {
mremap_userfaultfd_prep(new_vma, uf);
}
if (is_vm_hugetlb_page(vma)) {
clear_vma_resv_huge_pages(vma);
}
/* Conceal VM_ACCOUNT so old reservation is not undone */
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
if (vm_flags & VM_ACCOUNT && !(flags & MREMAP_DONTUNMAP)) {
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 22:37:49 +03:00
vm_flags_clear(vma, VM_ACCOUNT);
if (vma->vm_start < old_addr)
account_start = vma->vm_start;
if (vma->vm_end > old_addr + old_len)
account_end = vma->vm_end;
}
/*
[PATCH] mm: update_hiwaters just in time update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:18 +03:00
* If we failed to move page tables we still do total_vm increment
* since do_munmap() will decrement it by old_len == new_len.
*
* Since total_vm is about to be raised artificially high for a
* moment, we need to restore high watermark afterwards: if stats
* are taken meanwhile, total_vm and hiwater_vm appear too high.
* If this were a serious issue, we'd add a flag to do_munmap().
*/
[PATCH] mm: update_hiwaters just in time update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:18 +03:00
hiwater_vm = mm->hiwater_vm;
mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 02:22:07 +03:00
vm_stat_account(mm, vma->vm_flags, new_len >> PAGE_SHIFT);
x86/mm/pat: Add untrack_pfn_moved for mremap mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-23 03:54:23 +03:00
/* Tell pfnmap has moved from this vma */
if (unlikely(vma->vm_flags & VM_PFNMAP))
untrack_pfn_moved(vma);
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
if (unlikely(!err && (flags & MREMAP_DONTUNMAP))) {
/* We always clear VM_LOCKED[ONFAULT] on the old vma */
mm: replace VM_LOCKED_CLEAR_MASK with VM_LOCKED_MASK To simplify the usage of VM_LOCKED_CLEAR_MASK in vm_flags_clear(), replace it with VM_LOCKED_MASK bitmask and convert all users. Link: https://lkml.kernel.org/r/20230126193752.297968-4-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 22:37:48 +03:00
vm_flags_clear(vma, VM_LOCKED_MASK);
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
/*
* anon_vma links of the old vma is no longer needed after its page
* table has been moved.
*/
if (new_vma != vma && vma->vm_start == old_addr &&
vma->vm_end == (old_addr + old_len))
unlink_anon_vmas(vma);
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
/* Because we won't unmap we don't need to touch locked_vm */
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
return new_addr;
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
}
vma_iter_init(&vmi, mm, old_addr);
if (do_vmi_munmap(&vmi, mm, old_addr, old_len, uf_unmap, false) < 0) {
/* OOM: unable to split vma, just get accounts right */
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
if (vm_flags & VM_ACCOUNT && !(flags & MREMAP_DONTUNMAP))
vm_acct_memory(old_len >> PAGE_SHIFT);
account_start = account_end = 0;
}
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
if (vm_flags & VM_LOCKED) {
mm->locked_vm += new_len >> PAGE_SHIFT;
*locked = true;
}
mm/mremap: for MREMAP_DONTUNMAP check security_vm_enough_memory_mm() Currently memory is accounted post-mremap() with MREMAP_DONTUNMAP, which may break overcommit policy. So, check if there's enough memory before doing actual VMA copy. Don't unset VM_ACCOUNT on MREMAP_DONTUNMAP. By semantics, such mremap() is actually a memory allocation. That also simplifies the error-path a little. Also, as it's memory allocation on success don't reset hiwater_vm value. Link: https://lkml.kernel.org/r/20201013013416.390574-3-dima@arista.com Fixes: commit e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:08:09 +03:00
[PATCH] mm: update_hiwaters just in time update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:18 +03:00
mm->hiwater_vm = hiwater_vm;
/* Restore VM_ACCOUNT if one or two pieces of vma left */
if (account_start) {
vma = vma_prev(&vmi);
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 22:37:49 +03:00
vm_flags_set(vma, VM_ACCOUNT);
}
if (account_end) {
vma = vma_next(&vmi);
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 22:37:49 +03:00
vm_flags_set(vma, VM_ACCOUNT);
}
return new_addr;
}
static struct vm_area_struct *vma_to_resize(unsigned long addr,
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
unsigned long old_len, unsigned long new_len, unsigned long flags)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long pgoff;
vma = vma_lookup(mm, addr);
if (!vma)
return ERR_PTR(-EFAULT);
/*
* !old_len is a special case where an attempt is made to 'duplicate'
* a mapping. This makes no sense for private mappings as it will
* instead create a fresh/new mapping unrelated to the original. This
* is contrary to the basic idea of mremap which creates new mappings
* based on the original. There are no known use cases for this
* behavior. As a result, fail such attempts.
*/
if (!old_len && !(vma->vm_flags & (VM_SHARED | VM_MAYSHARE))) {
pr_warn_once("%s (%d): attempted to duplicate a private mapping with mremap. This is not supported.\n", current->comm, current->pid);
return ERR_PTR(-EINVAL);
}
mm: extend MREMAP_DONTUNMAP to non-anonymous mappings Patch series "mm: Extend MREMAP_DONTUNMAP to non-anonymous mappings", v5. This patch (of 3): Currently MREMAP_DONTUNMAP only accepts private anonymous mappings. This restriction was placed initially for simplicity and not because there exists a technical reason to do so. This change will widen the support to include any mappings which are not VM_DONTEXPAND or VM_PFNMAP. The primary use case is to support MREMAP_DONTUNMAP on mappings which may have been created from a memfd. This change will result in mremap(MREMAP_DONTUNMAP) returning -EINVAL if VM_DONTEXPAND or VM_PFNMAP mappings are specified. Lokesh Gidra who works on the Android JVM, provided an explanation of how such a feature will improve Android JVM garbage collection: "Android is developing a new garbage collector (GC), based on userfaultfd. The garbage collector will use userfaultfd (uffd) on the java heap during compaction. On accessing any uncompacted page, the application threads will find it missing, at which point the thread will create the compacted page and then use UFFDIO_COPY ioctl to get it mapped and then resume execution. Before starting this compaction, in a stop-the-world pause the heap will be mremap(MREMAP_DONTUNMAP) so that the java heap is ready to receive UFFD_EVENT_PAGEFAULT events after resuming execution. To speedup mremap operations, pagetable movement was optimized by moving PUD entries instead of PTE entries [1]. It was necessary as mremap of even modest sized memory ranges also took several milliseconds, and stopping the application for that long isn't acceptable in response-time sensitive cases. With UFFDIO_CONTINUE feature [2], it will be even more efficient to implement this GC, particularly the 'non-moveable' portions of the heap. It will also help in reducing the need to copy (UFFDIO_COPY) the pages. However, for this to work, the java heap has to be on a 'shared' vma. Currently MREMAP_DONTUNMAP only supports private anonymous mappings, this patch will enable using UFFDIO_CONTINUE for the new userfaultfd-based heap compaction." [1] https://lore.kernel.org/linux-mm/20201215030730.NC3CU98e4%25akpm@linux-foundation.org/ [2] https://lore.kernel.org/linux-mm/20210302000133.272579-1-axelrasmussen@google.com/ Link: https://lkml.kernel.org/r/20210323182520.2712101-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Alejandro Colomar <alx.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 08:57:45 +03:00
if ((flags & MREMAP_DONTUNMAP) &&
(vma->vm_flags & (VM_DONTEXPAND | VM_PFNMAP)))
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
return ERR_PTR(-EINVAL);
/* We can't remap across vm area boundaries */
if (old_len > vma->vm_end - addr)
return ERR_PTR(-EFAULT);
if (new_len == old_len)
return vma;
/* Need to be careful about a growing mapping */
pgoff = (addr - vma->vm_start) >> PAGE_SHIFT;
pgoff += vma->vm_pgoff;
if (pgoff + (new_len >> PAGE_SHIFT) < pgoff)
return ERR_PTR(-EINVAL);
if (vma->vm_flags & (VM_DONTEXPAND | VM_PFNMAP))
return ERR_PTR(-EFAULT);
if (mlock_future_check(mm, vma->vm_flags, new_len - old_len))
return ERR_PTR(-EAGAIN);
mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 02:22:07 +03:00
if (!may_expand_vm(mm, vma->vm_flags,
(new_len - old_len) >> PAGE_SHIFT))
return ERR_PTR(-ENOMEM);
return vma;
}
static unsigned long mremap_to(unsigned long addr, unsigned long old_len,
unsigned long new_addr, unsigned long new_len, bool *locked,
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
unsigned long flags, struct vm_userfaultfd_ctx *uf,
struct list_head *uf_unmap_early,
struct list_head *uf_unmap)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
unsigned long map_flags = 0;
if (offset_in_page(new_addr))
goto out;
if (new_len > TASK_SIZE || new_addr > TASK_SIZE - new_len)
goto out;
/* Ensure the old/new locations do not overlap */
if (addr + old_len > new_addr && new_addr + new_len > addr)
goto out;
mm,mremap: bail out earlier in mremap_to under map pressure When using mremap() syscall in addition to MREMAP_FIXED flag, mremap() calls mremap_to() which does the following: 1) unmaps the destination region where we are going to move the map 2) If the new region is going to be smaller, we unmap the last part of the old region Then, we will eventually call move_vma() to do the actual move. move_vma() checks whether we are at least 4 maps below max_map_count before going further, otherwise it bails out with -ENOMEM. The problem is that we might have already unmapped the vma's in steps 1) and 2), so it is not possible for userspace to figure out the state of the vmas after it gets -ENOMEM, and it gets tricky for userspace to clean up properly on error path. While it is true that we can return -ENOMEM for more reasons (e.g: see may_expand_vm() or move_page_tables()), I think that we can avoid this scenario if we check early in mremap_to() if the operation has high chances to succeed map-wise. Should that not be the case, we can bail out before we even try to unmap anything, so we make sure the vma's are left untouched in case we are likely to be short of maps. The thumb-rule now is to rely on the worst-scenario case we can have. That is when both vma's (old region and new region) are going to be split in 3, so we get two more maps to the ones we already hold (one per each). If current map count + 2 maps still leads us to 4 maps below the threshold, we are going to pass the check in move_vma(). Of course, this is not free, as it might generate false positives when it is true that we are tight map-wise, but the unmap operation can release several vma's leading us to a good state. Another approach was also investigated [1], but it may be too much hassle for what it brings. [1] https://lore.kernel.org/lkml/20190219155320.tkfkwvqk53tfdojt@d104.suse.de/ Link: http://lkml.kernel.org/r/20190226091314.18446-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Cyril Hrubis <chrubis@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 02:50:14 +03:00
/*
* move_vma() need us to stay 4 maps below the threshold, otherwise
* it will bail out at the very beginning.
* That is a problem if we have already unmaped the regions here
* (new_addr, and old_addr), because userspace will not know the
* state of the vma's after it gets -ENOMEM.
* So, to avoid such scenario we can pre-compute if the whole
* operation has high chances to success map-wise.
* Worst-scenario case is when both vma's (new_addr and old_addr) get
* split in 3 before unmapping it.
mm,mremap: bail out earlier in mremap_to under map pressure When using mremap() syscall in addition to MREMAP_FIXED flag, mremap() calls mremap_to() which does the following: 1) unmaps the destination region where we are going to move the map 2) If the new region is going to be smaller, we unmap the last part of the old region Then, we will eventually call move_vma() to do the actual move. move_vma() checks whether we are at least 4 maps below max_map_count before going further, otherwise it bails out with -ENOMEM. The problem is that we might have already unmapped the vma's in steps 1) and 2), so it is not possible for userspace to figure out the state of the vmas after it gets -ENOMEM, and it gets tricky for userspace to clean up properly on error path. While it is true that we can return -ENOMEM for more reasons (e.g: see may_expand_vm() or move_page_tables()), I think that we can avoid this scenario if we check early in mremap_to() if the operation has high chances to succeed map-wise. Should that not be the case, we can bail out before we even try to unmap anything, so we make sure the vma's are left untouched in case we are likely to be short of maps. The thumb-rule now is to rely on the worst-scenario case we can have. That is when both vma's (old region and new region) are going to be split in 3, so we get two more maps to the ones we already hold (one per each). If current map count + 2 maps still leads us to 4 maps below the threshold, we are going to pass the check in move_vma(). Of course, this is not free, as it might generate false positives when it is true that we are tight map-wise, but the unmap operation can release several vma's leading us to a good state. Another approach was also investigated [1], but it may be too much hassle for what it brings. [1] https://lore.kernel.org/lkml/20190219155320.tkfkwvqk53tfdojt@d104.suse.de/ Link: http://lkml.kernel.org/r/20190226091314.18446-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Cyril Hrubis <chrubis@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 02:50:14 +03:00
* That means 2 more maps (1 for each) to the ones we already hold.
* Check whether current map count plus 2 still leads us to 4 maps below
* the threshold, otherwise return -ENOMEM here to be more safe.
*/
if ((mm->map_count + 2) >= sysctl_max_map_count - 3)
return -ENOMEM;
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
if (flags & MREMAP_FIXED) {
ret = do_munmap(mm, new_addr, new_len, uf_unmap_early);
if (ret)
goto out;
}
if (old_len > new_len) {
ret = do_munmap(mm, addr+new_len, old_len - new_len, uf_unmap);
if (ret)
goto out;
old_len = new_len;
}
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
vma = vma_to_resize(addr, old_len, new_len, flags);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out;
}
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
/* MREMAP_DONTUNMAP expands by old_len since old_len == new_len */
if (flags & MREMAP_DONTUNMAP &&
!may_expand_vm(mm, vma->vm_flags, old_len >> PAGE_SHIFT)) {
ret = -ENOMEM;
goto out;
}
if (flags & MREMAP_FIXED)
map_flags |= MAP_FIXED;
if (vma->vm_flags & VM_MAYSHARE)
map_flags |= MAP_SHARED;
ret = get_unmapped_area(vma->vm_file, new_addr, new_len, vma->vm_pgoff +
((addr - vma->vm_start) >> PAGE_SHIFT),
map_flags);
if (IS_ERR_VALUE(ret))
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
goto out;
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
/* We got a new mapping */
if (!(flags & MREMAP_FIXED))
new_addr = ret;
ret = move_vma(vma, addr, old_len, new_len, new_addr, locked, flags, uf,
uf_unmap);
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
out:
return ret;
}
static int vma_expandable(struct vm_area_struct *vma, unsigned long delta)
{
unsigned long end = vma->vm_end + delta;
if (end < vma->vm_end) /* overflow */
return 0;
if (find_vma_intersection(vma->vm_mm, vma->vm_end, end))
return 0;
if (get_unmapped_area(NULL, vma->vm_start, end - vma->vm_start,
0, MAP_FIXED) & ~PAGE_MASK)
return 0;
return 1;
}
/*
* Expand (or shrink) an existing mapping, potentially moving it at the
* same time (controlled by the MREMAP_MAYMOVE flag and available VM space)
*
* MREMAP_FIXED option added 5-Dec-1999 by Benjamin LaHaise
* This option implies MREMAP_MAYMOVE.
*/
SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
unsigned long, new_len, unsigned long, flags,
unsigned long, new_addr)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
bool locked = false;
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
bool downgraded = false;
struct vm_userfaultfd_ctx uf = NULL_VM_UFFD_CTX;
LIST_HEAD(uf_unmap_early);
LIST_HEAD(uf_unmap);
/*
* There is a deliberate asymmetry here: we strip the pointer tag
* from the old address but leave the new address alone. This is
* for consistency with mmap(), where we prevent the creation of
* aliasing mappings in userspace by leaving the tag bits of the
* mapping address intact. A non-zero tag will cause the subsequent
* range checks to reject the address as invalid.
*
* See Documentation/arm64/tagged-address-abi.rst for more information.
*/
addr = untagged_addr(addr);
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
if (flags & ~(MREMAP_FIXED | MREMAP_MAYMOVE | MREMAP_DONTUNMAP))
return ret;
if (flags & MREMAP_FIXED && !(flags & MREMAP_MAYMOVE))
return ret;
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
/*
* MREMAP_DONTUNMAP is always a move and it does not allow resizing
* in the process.
*/
if (flags & MREMAP_DONTUNMAP &&
(!(flags & MREMAP_MAYMOVE) || old_len != new_len))
return ret;
if (offset_in_page(addr))
return ret;
old_len = PAGE_ALIGN(old_len);
new_len = PAGE_ALIGN(new_len);
/*
* We allow a zero old-len as a special case
* for DOS-emu "duplicate shm area" thing. But
* a zero new-len is nonsensical.
*/
if (!new_len)
return ret;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
if (mmap_write_lock_killable(current->mm))
mm: make mmap_sem for write waits killable for mm syscalls This is a follow up work for oom_reaper [1]. As the async OOM killing depends on oom_sem for read we would really appreciate if a holder for write didn't stood in the way. This patchset is changing many of down_write calls to be killable to help those cases when the writer is blocked and waiting for readers to release the lock and so help __oom_reap_task to process the oom victim. Most of the patches are really trivial because the lock is help from a shallow syscall paths where we can return EINTR trivially and allow the current task to die (note that EINTR will never get to the userspace as the task has fatal signal pending). Others seem to be easy as well as the callers are already handling fatal errors and bail and return to userspace which should be sufficient to handle the failure gracefully. I am not familiar with all those code paths so a deeper review is really appreciated. As this work is touching more areas which are not directly connected I have tried to keep the CC list as small as possible and people who I believed would be familiar are CCed only to the specific patches (all should have received the cover though). This patchset is based on linux-next and it depends on down_write_killable for rw_semaphores which got merged into tip locking/rwsem branch and it is merged into this next tree. I guess it would be easiest to route these patches via mmotm because of the dependency on the tip tree but if respective maintainers prefer other way I have no objections. I haven't covered all the mmap_write(mm->mmap_sem) instances here $ git grep "down_write(.*\<mmap_sem\>)" next/master | wc -l 98 $ git grep "down_write(.*\<mmap_sem\>)" | wc -l 62 I have tried to cover those which should be relatively easy to review in this series because this alone should be a nice improvement. Other places can be changed on top. [0] http://lkml.kernel.org/r/1456752417-9626-1-git-send-email-mhocko@kernel.org [1] http://lkml.kernel.org/r/1452094975-551-1-git-send-email-mhocko@kernel.org [2] http://lkml.kernel.org/r/1456750705-7141-1-git-send-email-mhocko@kernel.org This patch (of 18): This is the first step in making mmap_sem write waiters killable. It focuses on the trivial ones which are taking the lock early after entering the syscall and they are not changing state before. Therefore it is very easy to change them to use down_write_killable and immediately return with -EINTR. This will allow the waiter to pass away without blocking the mmap_sem which might be required to make a forward progress. E.g. the oom reaper will need the lock for reading to dismantle the OOM victim address space. The only tricky function in this patch is vm_mmap_pgoff which has many call sites via vm_mmap. To reduce the risk keep vm_mmap with the original non-killable semantic for now. vm_munmap callers do not bother checking the return value so open code it into the munmap syscall path for now for simplicity. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-24 02:25:27 +03:00
return -EINTR;
vma = vma_lookup(mm, addr);
if (!vma) {
ret = -EFAULT;
goto out;
}
if (is_vm_hugetlb_page(vma)) {
struct hstate *h __maybe_unused = hstate_vma(vma);
old_len = ALIGN(old_len, huge_page_size(h));
new_len = ALIGN(new_len, huge_page_size(h));
/* addrs must be huge page aligned */
if (addr & ~huge_page_mask(h))
goto out;
if (new_addr & ~huge_page_mask(h))
goto out;
/*
* Don't allow remap expansion, because the underlying hugetlb
* reservation is not yet capable to handle split reservation.
*/
if (new_len > old_len)
goto out;
}
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
if (flags & (MREMAP_FIXED | MREMAP_DONTUNMAP)) {
ret = mremap_to(addr, old_len, new_addr, new_len,
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
&locked, flags, &uf, &uf_unmap_early,
&uf_unmap);
goto out;
}
/*
* Always allow a shrinking remap: that just unmaps
* the unnecessary pages..
* do_vmi_munmap does all the needed commit accounting, and
* downgrades mmap_lock to read if so directed.
*/
if (old_len >= new_len) {
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
int retval;
VMA_ITERATOR(vmi, mm, addr + new_len);
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
retval = do_vmi_munmap(&vmi, mm, addr + new_len,
mm/mmap: reorganize munmap to use maple states Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and do_mas_align_munmap(). do_munmap() is a wrapper to create a maple state for any callers that have not been converted to the maple tree. do_mas_munmap() takes a maple state to mumap a range. This is just a small function which checks for error conditions and aligns the end of the range. do_mas_align_munmap() uses the aligned range to mumap a range. do_mas_align_munmap() starts with the first VMA in the range, then finds the last VMA in the range. Both start and end are split if necessary. Then the VMAs are removed from the linked list and the mm mlock count is updated at the same time. Followed by a single tree operation of overwriting the area in with a NULL. Finally, the detached list is unmapped and freed. By reorganizing the munmap calls as outlined, it is now possible to avoid extra work of aligning pre-aligned callers which are known to be safe, avoid extra VMA lookups or tree walks for modifications. detach_vmas_to_be_unmapped() is no longer used, so drop this code. vm_brk_flags() can just call the do_mas_munmap() as it checks for intersecting VMAs directly. Link: https://lkml.kernel.org/r/20220906194824.2110408-29-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 22:48:52 +03:00
old_len - new_len, &uf_unmap, true);
/* Returning 1 indicates mmap_lock is downgraded to read. */
mm/mmap: reorganize munmap to use maple states Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and do_mas_align_munmap(). do_munmap() is a wrapper to create a maple state for any callers that have not been converted to the maple tree. do_mas_munmap() takes a maple state to mumap a range. This is just a small function which checks for error conditions and aligns the end of the range. do_mas_align_munmap() uses the aligned range to mumap a range. do_mas_align_munmap() starts with the first VMA in the range, then finds the last VMA in the range. Both start and end are split if necessary. Then the VMAs are removed from the linked list and the mm mlock count is updated at the same time. Followed by a single tree operation of overwriting the area in with a NULL. Finally, the detached list is unmapped and freed. By reorganizing the munmap calls as outlined, it is now possible to avoid extra work of aligning pre-aligned callers which are known to be safe, avoid extra VMA lookups or tree walks for modifications. detach_vmas_to_be_unmapped() is no longer used, so drop this code. vm_brk_flags() can just call the do_mas_munmap() as it checks for intersecting VMAs directly. Link: https://lkml.kernel.org/r/20220906194824.2110408-29-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 22:48:52 +03:00
if (retval == 1) {
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
downgraded = true;
mm/mmap: reorganize munmap to use maple states Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and do_mas_align_munmap(). do_munmap() is a wrapper to create a maple state for any callers that have not been converted to the maple tree. do_mas_munmap() takes a maple state to mumap a range. This is just a small function which checks for error conditions and aligns the end of the range. do_mas_align_munmap() uses the aligned range to mumap a range. do_mas_align_munmap() starts with the first VMA in the range, then finds the last VMA in the range. Both start and end are split if necessary. Then the VMAs are removed from the linked list and the mm mlock count is updated at the same time. Followed by a single tree operation of overwriting the area in with a NULL. Finally, the detached list is unmapped and freed. By reorganizing the munmap calls as outlined, it is now possible to avoid extra work of aligning pre-aligned callers which are known to be safe, avoid extra VMA lookups or tree walks for modifications. detach_vmas_to_be_unmapped() is no longer used, so drop this code. vm_brk_flags() can just call the do_mas_munmap() as it checks for intersecting VMAs directly. Link: https://lkml.kernel.org/r/20220906194824.2110408-29-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 22:48:52 +03:00
} else if (retval < 0 && old_len != new_len) {
ret = retval;
goto out;
}
ret = addr;
goto out;
}
/*
* Ok, we need to grow..
*/
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
vma = vma_to_resize(addr, old_len, new_len, flags);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out;
}
/* old_len exactly to the end of the area..
*/
if (old_len == vma->vm_end - addr) {
/* can we just expand the current mapping? */
if (vma_expandable(vma, new_len - old_len)) {
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
long pages = (new_len - old_len) >> PAGE_SHIFT;
unsigned long extension_start = addr + old_len;
unsigned long extension_end = addr + new_len;
pgoff_t extension_pgoff = vma->vm_pgoff +
((extension_start - vma->vm_start) >> PAGE_SHIFT);
VMA_ITERATOR(vmi, mm, extension_start);
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
if (vma->vm_flags & VM_ACCOUNT) {
if (security_vm_enough_memory_mm(mm, pages)) {
ret = -ENOMEM;
goto out;
}
}
/*
* Function vma_merge() is called on the extension we
* are adding to the already existing vma, vma_merge()
* will merge this extension with the already existing
* vma (expand operation itself) and possibly also with
* the next vma if it becomes adjacent to the expanded
* vma and otherwise compatible.
*
* However, vma_merge() can currently fail due to
* is_mergeable_vma() check for vm_ops->close (see the
* comment there). Yet this should not prevent vma
* expanding, so perform a simple expand for such vma.
* Ideally the check for close op should be only done
* when a vma would be actually removed due to a merge.
*/
if (!vma->vm_ops || !vma->vm_ops->close) {
vma = vma_merge(&vmi, mm, vma, extension_start,
extension_end, vma->vm_flags, vma->anon_vma,
vma->vm_file, extension_pgoff, vma_policy(vma),
vma->vm_userfaultfd_ctx, anon_vma_name(vma));
} else if (vma_expand(&vmi, vma, vma->vm_start,
addr + new_len, vma->vm_pgoff, NULL)) {
vma = NULL;
}
if (!vma) {
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
vm_unacct_memory(pages);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 00:42:07 +03:00
ret = -ENOMEM;
goto out;
}
mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 02:22:07 +03:00
vm_stat_account(mm, vma->vm_flags, pages);
if (vma->vm_flags & VM_LOCKED) {
mm->locked_vm += pages;
locked = true;
new_addr = addr;
}
ret = addr;
goto out;
}
}
/*
* We weren't able to just expand or shrink the area,
* we need to create a new one and move it..
*/
ret = -ENOMEM;
if (flags & MREMAP_MAYMOVE) {
unsigned long map_flags = 0;
if (vma->vm_flags & VM_MAYSHARE)
map_flags |= MAP_SHARED;
new_addr = get_unmapped_area(vma->vm_file, 0, new_len,
vma->vm_pgoff +
((addr - vma->vm_start) >> PAGE_SHIFT),
map_flags);
if (IS_ERR_VALUE(new_addr)) {
ret = new_addr;
goto out;
}
ret = move_vma(vma, addr, old_len, new_len, new_addr,
mm/mremap: add MREMAP_DONTUNMAP to mremap() When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set, the source mapping will not be removed. The remap operation will be performed as it would have been normally by moving over the page tables to the new mapping. The old vma will have any locked flags cleared, have no pagetables, and any userfaultfds that were watching that range will continue watching it. For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause the mremap() call to fail. Because MREMAP_DONTUNMAP always results in moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must always be equal to the new_len otherwise it will return -EINVAL. We hope to use this in Chrome OS where with userfaultfd we could write an anonymous mapping to disk without having to STOP the process or worry about VMA permission changes. This feature also has a use case in Android, Lokesh Gidra has said that "As part of using userfaultfd for GC, We'll have to move the physical pages of the java heap to a separate location. For this purpose mremap will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java heap, its virtual mapping will be removed as well. Therefore, we'll require performing mmap immediately after. This is not only time consuming but also opens a time window where a native thread may call mmap and reserve the java heap's address range for its own usage. This flag solves the problem." [bgeffon@google.com: v6] Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com [bgeffon@google.com: v7] Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Florian Weimer <fweimer@redhat.com> Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:17 +03:00
&locked, flags, &uf, &uf_unmap);
}
out:
mm/mremap: don't account pages in vma_to_resize() All this vm_unacct_memory(charged) dance seems to complicate the life without a good reason. Furthermore, it seems not always done right on error-pathes in mremap_to(). And worse than that: this `charged' difference is sometimes double-accounted for growing MREMAP_DONTUNMAP mremap()s in move_vma(): if (security_vm_enough_memory_mm(mm, new_len >> PAGE_SHIFT)) Let's not do this. Account memory in mremap() fast-path for growing VMAs or in move_vma() for actually moving things. The same simpler way as it's done by vm_stat_account(), but with a difference to call security_vm_enough_memory_mm() before copying/adjusting VMA. Originally noticed by Chen Wandun: https://lkml.kernel.org/r/20210717101942.120607-1-chenwandun@huawei.com Link: https://lkml.kernel.org/r/20210721131320.522061-1-dima@arista.com Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 23:39:06 +03:00
if (offset_in_page(ret))
locked = false;
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
if (downgraded)
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_read_unlock(current->mm);
mm: mremap: downgrade mmap_sem to read when shrinking Other than munmap, mremap might be used to shrink memory mapping too. So, it may hold write mmap_sem for long time when shrinking large mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in munmap") described. The mremap() will not manipulate vmas anymore after __do_munmap() call for the mapping shrink use case, so it is safe to downgrade to read mmap_sem. So, the same optimization, which downgrades mmap_sem to read for zapping pages, is also feasible and reasonable to this case. The period of holding exclusive mmap_sem for shrinking large mapping would be reduced significantly with this optimization. MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this optimization since they need manipulate vmas after do_munmap(), downgrading mmap_sem may create race window. Simple mapping shrink is the low hanging fruit, and it may cover the most cases of unmap with munmap together. [akpm@linux-foundation.org: tweak comment] [yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue] Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 01:08:50 +03:00
else
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_unlock(current->mm);
if (locked && new_len > old_len)
mm_populate(new_addr + old_len, new_len - old_len);
userfaultfd_unmap_complete(mm, &uf_unmap_early);
mremap_userfaultfd_complete(&uf, addr, ret, old_len);
userfaultfd_unmap_complete(mm, &uf_unmap);
return ret;
}