iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/sound/pci/hda/hda_jack.c

519 lines
14 KiB
C
Raw Normal View History

ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
/*
* Jack-detection handling for HD-audio
*
* Copyright (c) 2011 Takashi Iwai <tiwai@suse.de>
*
* This driver is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/slab.h>
ALSA: hda - Add missing inclusion of linux/export.h This is needed newly since 3.2... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 14:28:33 +01:00
#include <linux/export.h>
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
#include <sound/core.h>
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
#include <sound/control.h>
ALSA: hda - Merge input-jack helpers to hda_jack.c We can use the very same table in hda_jack.c for managing the list for input-jack elements, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:54:51 +01:00
#include <sound/jack.h>
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
#include "hda_codec.h"
#include "hda_local.h"
ALSA: hda - Move BIOS pin-parser code to hda_auto_parser.c Just code shuffles. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07 17:42:31 +02:00
#include "hda_auto_parser.h"
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
#include "hda_jack.h"
ALSA: hda - Make is_jack_detectable() as non-inlined It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:41:42 +01:00
bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
{
ALSA: hda - Add codec->no_jack_detect flag Add a new flag to indicate that the codec has no jack-detection cap. This flag should be set for hardwares that have no jack-detect implementation although the codec chip itself supports it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:55:02 +01:00
if (codec->no_jack_detect)
return false;
ALSA: hda - Make is_jack_detectable() as non-inlined It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:41:42 +01:00
if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
return false;
ALSA: hda - Remove ignore_misc_bit The purpose of this flag is unclear. If the problem is that some machines have broken misc/NO_PRESENCE bits, they should be fixed by pin fixups. In addition, this causes jack detection functionality to be flawed on the M31EI, where there are two jacks without jack detection (which is properly marked as NO_PRESENCE), but due to ignore_misc_bit, these jacks are instead being reported as being present but always unplugged. BugLink: https://bugs.launchpad.net/bugs/939161 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-07 07:25:44 +02:00
if (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
AC_DEFCFG_MISC_NO_PRESENCE)
ALSA: hda - Make is_jack_detectable() as non-inlined It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13 11:41:42 +01:00
return false;
if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
return false;
return true;
}
EXPORT_SYMBOL_HDA(is_jack_detectable);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
/* execute pin sense measurement */
static u32 read_pin_sense(struct hda_codec *codec, hda_nid_t nid)
{
u32 pincap;
if (!codec->no_trigger_sense) {
pincap = snd_hda_query_pin_caps(codec, nid);
if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
snd_hda_codec_read(codec, nid, 0,
AC_VERB_SET_PIN_SENSE, 0);
}
return snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
}
/**
* snd_hda_jack_tbl_get - query the jack-table entry for the given NID
*/
struct hda_jack_tbl *
snd_hda_jack_tbl_get(struct hda_codec *codec, hda_nid_t nid)
{
struct hda_jack_tbl *jack = codec->jacktbl.list;
int i;
if (!nid || !jack)
return NULL;
for (i = 0; i < codec->jacktbl.used; i++, jack++)
if (jack->nid == nid)
return jack;
return NULL;
}
EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_get);
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
/**
* snd_hda_jack_tbl_get_from_tag - query the jack-table entry for the given tag
*/
struct hda_jack_tbl *
snd_hda_jack_tbl_get_from_tag(struct hda_codec *codec, unsigned char tag)
{
struct hda_jack_tbl *jack = codec->jacktbl.list;
int i;
if (!tag || !jack)
return NULL;
for (i = 0; i < codec->jacktbl.used; i++, jack++)
if (jack->tag == tag)
return jack;
return NULL;
}
EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_get_from_tag);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
/**
* snd_hda_jack_tbl_new - create a jack-table entry for the given NID
*/
struct hda_jack_tbl *
snd_hda_jack_tbl_new(struct hda_codec *codec, hda_nid_t nid)
{
struct hda_jack_tbl *jack = snd_hda_jack_tbl_get(codec, nid);
if (jack)
return jack;
jack = snd_array_new(&codec->jacktbl);
if (!jack)
return NULL;
jack->nid = nid;
jack->jack_dirty = 1;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
jack->tag = codec->jacktbl.used;
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
return jack;
}
ALSA: HDA: Jack: Export required functions from hda_jack.c These two functions are being used by the codec-idt and codec-hdmi modules, so they need to be exported properly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-11 17:13:15 +01:00
EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_new);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
void snd_hda_jack_tbl_clear(struct hda_codec *codec)
{
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
#ifdef CONFIG_SND_HDA_INPUT_JACK
/* free jack instances manually when clearing/reconfiguring */
if (!codec->bus->shutdown && codec->jacktbl.list) {
struct hda_jack_tbl *jack = codec->jacktbl.list;
int i;
for (i = 0; i < codec->jacktbl.used; i++, jack++) {
if (jack->jack)
snd_device_free(codec->bus->card, jack->jack);
}
}
#endif
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
snd_array_free(&codec->jacktbl);
}
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
#define get_jack_plug_state(sense) !!(sense & AC_PINSENSE_PRESENCE)
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
/* update the cached value and notification flag if needed */
static void jack_detect_update(struct hda_codec *codec,
struct hda_jack_tbl *jack)
{
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
if (!jack->jack_dirty)
return;
if (jack->phantom_jack)
jack->pin_sense = AC_PINSENSE_PRESENCE;
else
ALSA: Introduce common helper functions for jack-detection control Now move the helper function for creating and reporting the jack-detection to the common place. The driver that needs this functionality should select CONFIG_SND_KCTL_JACK kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:36:06 +01:00
jack->pin_sense = read_pin_sense(codec, jack->nid);
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
/* A gating jack indicates the jack is invalid if gating is unplugged */
if (jack->gating_jack && !snd_hda_jack_detect(codec, jack->gating_jack))
jack->pin_sense &= ~AC_PINSENSE_PRESENCE;
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
jack->jack_dirty = 0;
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
/* If a jack is gated by this one update it. */
if (jack->gated_jack) {
struct hda_jack_tbl *gated =
snd_hda_jack_tbl_get(codec, jack->gated_jack);
if (gated) {
gated->jack_dirty = 1;
jack_detect_update(codec, gated);
}
}
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
}
/**
* snd_hda_set_dirty_all - Mark all the cached as dirty
*
* This function sets the dirty flag to all entries of jack table.
* It's called from the resume path in hda_codec.c.
*/
void snd_hda_jack_set_dirty_all(struct hda_codec *codec)
{
struct hda_jack_tbl *jack = codec->jacktbl.list;
int i;
for (i = 0; i < codec->jacktbl.used; i++, jack++)
if (jack->nid)
jack->jack_dirty = 1;
}
EXPORT_SYMBOL_HDA(snd_hda_jack_set_dirty_all);
/**
* snd_hda_pin_sense - execute pin sense measurement
* @codec: the CODEC to sense
* @nid: the pin NID to sense
*
* Execute necessary pin sense measurement and return its Presence Detect,
* Impedance, ELD Valid etc. status bits.
*/
u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
{
struct hda_jack_tbl *jack = snd_hda_jack_tbl_get(codec, nid);
if (jack) {
jack_detect_update(codec, jack);
return jack->pin_sense;
}
return read_pin_sense(codec, nid);
}
EXPORT_SYMBOL_HDA(snd_hda_pin_sense);
/**
* snd_hda_jack_detect - query pin Presence Detect status
* @codec: the CODEC to sense
* @nid: the pin NID to sense
*
* Query and return the pin's Presence Detect status.
*/
int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
{
u32 sense = snd_hda_pin_sense(codec, nid);
ALSA: Introduce common helper functions for jack-detection control Now move the helper function for creating and reporting the jack-detection to the common place. The driver that needs this functionality should select CONFIG_SND_KCTL_JACK kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:36:06 +01:00
return get_jack_plug_state(sense);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
}
EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
/**
* snd_hda_jack_detect_enable - enable the jack-detection
*/
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
int snd_hda_jack_detect_enable_callback(struct hda_codec *codec, hda_nid_t nid,
unsigned char action,
hda_jack_callback cb)
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
{
struct hda_jack_tbl *jack = snd_hda_jack_tbl_new(codec, nid);
if (!jack)
return -ENOMEM;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
if (jack->jack_detect)
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
return 0; /* already registered */
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
jack->jack_detect = 1;
if (action)
jack->action = action;
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
if (cb)
jack->callback = cb;
ALSA: hda - Don't enable unsol for jacks we're polling This will greatly reduce the frequency for detection errors in those cases where the hardware is "flaky", i e, rapidly changing between plugged and unplugged states even without user interaction. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-17 14:45:05 +02:00
if (codec->jackpoll_interval > 0)
return 0; /* No unsol if we're polling instead */
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
return snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
AC_USRSP_EN | jack->tag);
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
}
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
EXPORT_SYMBOL_HDA(snd_hda_jack_detect_enable_callback);
int snd_hda_jack_detect_enable(struct hda_codec *codec, hda_nid_t nid,
unsigned char action)
{
return snd_hda_jack_detect_enable_callback(codec, nid, action, NULL);
}
ALSA: hda - Cache the jack-detection value Introduce a table containing the pins and their jack-detection states for avoiding the unnecessary verbs to check the pin status at each time. When the unsol event is enabled via snd_hda_jack_detect_enable(), it automatically adds the given NID to the table. Then the driver supposes that the codec driver will set the dirty flag appropariately when an unsolicited event is invoked for that pin. The behavior for reading other pins that aren't registered in the table doesn't change. Only the pins assigned to the table are cached, so far. In near futre, this table can be extended to use the central place for the unsolicited events of all pins, etc, and eventually include the jack-detect kcontrols that replace the current input-jack stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27 22:12:46 +02:00
EXPORT_SYMBOL_HDA(snd_hda_jack_detect_enable);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
/**
* snd_hda_jack_set_gating_jack - Set gating jack.
*
* Indicates the gated jack is only valid when the gating jack is plugged.
*/
int snd_hda_jack_set_gating_jack(struct hda_codec *codec, hda_nid_t gated_nid,
hda_nid_t gating_nid)
{
struct hda_jack_tbl *gated = snd_hda_jack_tbl_get(codec, gated_nid);
struct hda_jack_tbl *gating = snd_hda_jack_tbl_get(codec, gating_nid);
if (!gated || !gating)
return -EINVAL;
gated->gating_jack = gating_nid;
gating->gated_jack = gated_nid;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_jack_set_gating_jack);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
/**
* snd_hda_jack_report_sync - sync the states of all jacks and report if changed
*/
void snd_hda_jack_report_sync(struct hda_codec *codec)
{
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
struct hda_jack_tbl *jack;
ALSA: Introduce common helper functions for jack-detection control Now move the helper function for creating and reporting the jack-detection to the common place. The driver that needs this functionality should select CONFIG_SND_KCTL_JACK kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:36:06 +01:00
int i, state;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
/* update all jacks at first */
jack = codec->jacktbl.list;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
for (i = 0; i < codec->jacktbl.used; i++, jack++)
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
if (jack->nid)
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
jack_detect_update(codec, jack);
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
/* report the updated jacks; it's done after updating all jacks
* to make sure that all gating jacks properly have been set
*/
jack = codec->jacktbl.list;
for (i = 0; i < codec->jacktbl.used; i++, jack++)
if (jack->nid) {
ALSA: hda/jack - Fix NULL-dereference at probing At probing time, the elements that aren't assigned to kctl or jack may be called. Need proper NULL-checks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-11 17:53:03 +01:00
if (!jack->kctl)
continue;
ALSA: Introduce common helper functions for jack-detection control Now move the helper function for creating and reporting the jack-detection to the common place. The driver that needs this functionality should select CONFIG_SND_KCTL_JACK kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:36:06 +01:00
state = get_jack_plug_state(jack->pin_sense);
ALSA: hda - Merge input-jack helpers to hda_jack.c We can use the very same table in hda_jack.c for managing the list for input-jack elements, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:54:51 +01:00
snd_kctl_jack_report(codec->bus->card, jack->kctl, state);
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
#ifdef CONFIG_SND_HDA_INPUT_JACK
if (jack->jack)
snd_jack_report(jack->jack,
state ? jack->type : 0);
#endif
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
}
}
EXPORT_SYMBOL_HDA(snd_hda_jack_report_sync);
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
#ifdef CONFIG_SND_HDA_INPUT_JACK
/* guess the jack type from the pin-config */
static int get_input_jack_type(struct hda_codec *codec, hda_nid_t nid)
{
unsigned int def_conf = snd_hda_codec_get_pincfg(codec, nid);
switch (get_defcfg_device(def_conf)) {
case AC_JACK_LINE_OUT:
case AC_JACK_SPEAKER:
return SND_JACK_LINEOUT;
case AC_JACK_HP_OUT:
return SND_JACK_HEADPHONE;
case AC_JACK_SPDIF_OUT:
case AC_JACK_DIG_OTHER_OUT:
return SND_JACK_AVOUT;
case AC_JACK_MIC_IN:
return SND_JACK_MICROPHONE;
default:
return SND_JACK_LINEIN;
}
}
static void hda_free_jack_priv(struct snd_jack *jack)
{
struct hda_jack_tbl *jacks = jack->private_data;
jacks->nid = 0;
jacks->jack = NULL;
}
#endif
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
/**
* snd_hda_jack_add_kctl - Add a kctl for the given pin
*
* This assigns a jack-detection kctl to the given pin. The kcontrol
* will have the given name and index.
*/
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
const char *name, int idx, bool phantom_jack)
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
{
struct hda_jack_tbl *jack;
struct snd_kcontrol *kctl;
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
int err, state;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
jack = snd_hda_jack_tbl_new(codec, nid);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (!jack)
return 0;
if (jack->kctl)
return 0; /* already created */
ALSA: Introduce common helper functions for jack-detection control Now move the helper function for creating and reporting the jack-detection to the common place. The driver that needs this functionality should select CONFIG_SND_KCTL_JACK kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02 08:36:06 +01:00
kctl = snd_kctl_jack_new(name, idx, codec);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (!kctl)
return -ENOMEM;
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
err = snd_hda_ctl_add(codec, nid, kctl);
if (err < 0)
return err;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
jack->kctl = kctl;
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
jack->phantom_jack = !!phantom_jack;
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
state = snd_hda_jack_detect(codec, nid);
snd_kctl_jack_report(codec->bus->card, kctl, state);
#ifdef CONFIG_SND_HDA_INPUT_JACK
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
if (!phantom_jack) {
jack->type = get_input_jack_type(codec, nid);
err = snd_jack_new(codec->bus->card, name, jack->type,
&jack->jack);
if (err < 0)
return err;
jack->jack->private_data = jack;
jack->jack->private_free = hda_free_jack_priv;
snd_jack_report(jack->jack, state ? jack->type : 0);
}
ALSA: hda - Integrate input-jack stuff into kctl-jack Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01 17:41:36 +01:00
#endif
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
return 0;
}
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
int snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
const char *name, int idx)
{
return __snd_hda_jack_add_kctl(codec, nid, name, idx, false);
}
ALSA: HDA: Jack: Export required functions from hda_jack.c These two functions are being used by the codec-idt and codec-hdmi modules, so they need to be exported properly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-11 17:13:15 +01:00
EXPORT_SYMBOL_HDA(snd_hda_jack_add_kctl);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
/* get the unique index number for the given kctl name */
static int get_unique_index(struct hda_codec *codec, const char *name, int idx)
{
struct hda_jack_tbl *jack;
int i, len = strlen(name);
again:
jack = codec->jacktbl.list;
for (i = 0; i < codec->jacktbl.used; i++, jack++) {
/* jack->kctl.id contains "XXX Jack" name string with index */
if (jack->kctl &&
!strncmp(name, jack->kctl->id.name, len) &&
!strcmp(" Jack", jack->kctl->id.name + len) &&
jack->kctl->id.index == idx) {
idx++;
goto again;
}
}
return idx;
}
ALSA: hda - Give more unique names by snd_hda_get_pin_label() The function now gives more unique names for the output pins by adding some prefix and suffix for the location and the channels. Otherwise, it can pass the index number. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 15:33:26 +01:00
static int add_jack_kctl(struct hda_codec *codec, hda_nid_t nid,
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
const struct auto_pin_cfg *cfg)
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
{
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
unsigned int def_conf, conn;
ALSA: hda - Give more unique names by snd_hda_get_pin_label() The function now gives more unique names for the output pins by adding some prefix and suffix for the location and the channels. Otherwise, it can pass the index number. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 15:33:26 +01:00
char name[44];
int idx, err;
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
bool phantom_jack;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (!nid)
return 0;
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
def_conf = snd_hda_codec_get_pincfg(codec, nid);
conn = get_defcfg_connect(def_conf);
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
if (conn == AC_JACK_PORT_NONE)
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
return 0;
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
phantom_jack = (conn != AC_JACK_PORT_COMPLEX) ||
!is_jack_detectable(codec, nid);
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
ALSA: hda - Give more unique names by snd_hda_get_pin_label() The function now gives more unique names for the output pins by adding some prefix and suffix for the location and the channels. Otherwise, it can pass the index number. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 15:33:26 +01:00
snd_hda_get_pin_label(codec, nid, cfg, name, sizeof(name), &idx);
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
if (phantom_jack)
/* Example final name: "Internal Mic Phantom Jack" */
strncat(name, " Phantom", sizeof(name) - strlen(name) - 1);
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
idx = get_unique_index(codec, name, idx);
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
err = __snd_hda_jack_add_kctl(codec, nid, name, idx, phantom_jack);
ALSA: hda - Manage unsol tags in hda_jack.c Manage the tags assigned for unsolicited events dynamically together with the jack-detection routines. Basically this is almost same as what we've done in patch_sigmatel.c. Assign the new tag number for each new unsol event, associate with the given NID and the action type, etc. With this change, now all pins looked over in snd_hda_jack_add_kctls() are actually enabled for detection now even if the pins aren't used for jack-retasking by the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 01:16:55 +02:00
if (err < 0)
return err;
ALSA: HDA: Create phantom jacks for fixed inputs and outputs PulseAudio sometimes have difficulties knowing that there is a "Speaker" or "Internal Mic", if they have no individual volume controls or selectors. As a result, only e g "Headphone" might be created for a laptop, but no "Speaker". To help out, create phantom jacks (that are always present, at least for now) for "Speaker", "Internal Mic" etc, in case we detect them. The naming convention is e g "Speaker Phantom Jack". In order not to pollute the /dev/input namespace with even more devices, these are added to the kcontrols only, not the input devices. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-04 09:33:51 +02:00
if (!phantom_jack)
return snd_hda_jack_detect_enable(codec, nid, 0);
return 0;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
}
/**
* snd_hda_jack_add_kctls - Add kctls for all pins included in the given pincfg
*/
int snd_hda_jack_add_kctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
const hda_nid_t *p;
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
int i, err;
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
for (i = 0, p = cfg->line_out_pins; i < cfg->line_outs; i++, p++) {
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, *p, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
}
for (i = 0, p = cfg->hp_pins; i < cfg->hp_outs; i++, p++) {
if (*p == *cfg->line_out_pins) /* might be duplicated */
break;
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, *p, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
}
for (i = 0, p = cfg->speaker_pins; i < cfg->speaker_outs; i++, p++) {
if (*p == *cfg->line_out_pins) /* might be duplicated */
break;
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, *p, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
}
for (i = 0; i < cfg->num_inputs; i++) {
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, cfg->inputs[i].pin, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
}
for (i = 0, p = cfg->dig_out_pins; i < cfg->dig_outs; i++, p++) {
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, *p, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
}
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, cfg->dig_in_pin, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
ALSA: hda - Fix index number conflicts of phantom jacks Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-17 16:48:27 +02:00
err = add_jack_kctl(codec, cfg->mono_out_pin, cfg);
ALSA: hda - Create jack-detection kcontrols Create kcontrols for pin jack-detections, which work similarly like jack-input layer. Each control will notify when the jack is plugged or unplugged, and also user can read the value at any time via the normal control API. The control elements are created with iface=CARD, so that they won't appear in the mixer apps. So far, only the pins that enabled the jack-detection are registered. For covering all pins, the transition of the common unsol-tag handling would be needed. Stay tuned. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28 00:03:22 +02:00
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_jack_add_kctls);
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
static void call_jack_callback(struct hda_codec *codec,
struct hda_jack_tbl *jack)
{
if (jack->callback)
jack->callback(codec, jack);
if (jack->gated_jack) {
struct hda_jack_tbl *gated =
snd_hda_jack_tbl_get(codec, jack->gated_jack);
if (gated && gated->callback)
gated->callback(codec, gated);
}
}
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
void snd_hda_jack_unsol_event(struct hda_codec *codec, unsigned int res)
{
struct hda_jack_tbl *event;
int tag = (res >> AC_UNSOL_RES_TAG_SHIFT) & 0x7f;
event = snd_hda_jack_tbl_get_from_tag(codec, tag);
if (!event)
return;
event->jack_dirty = 1;
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
call_jack_callback(codec, event);
ALSA: hda - make a generic unsol event handler Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-25 11:30:59 +02:00
snd_hda_jack_report_sync(codec);
}
EXPORT_SYMBOL_HDA(snd_hda_jack_unsol_event);
ALSA: hda - Implement a poll loop for jacks as a module parameter Now that we have a generic unsol mechanism, we can implement a generic poll loop, which can be used for debugging, or if a codec's unsol mechanism is broken. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-09 15:04:21 +02:00
void snd_hda_jack_poll_all(struct hda_codec *codec)
{
struct hda_jack_tbl *jack = codec->jacktbl.list;
int i, changes = 0;
for (i = 0; i < codec->jacktbl.used; i++, jack++) {
unsigned int old_sense;
if (!jack->nid || !jack->jack_dirty || jack->phantom_jack)
continue;
old_sense = get_jack_plug_state(jack->pin_sense);
jack_detect_update(codec, jack);
if (old_sense == get_jack_plug_state(jack->pin_sense))
continue;
changes = 1;
ALSA: hda - Allow jack state to depend on another jack Introduce the concept of a "gated" jack. The gated jack's pin sense is only valid when the "gating" jack is plugged. This requires checking the gating jack when the gated jack changes and re-checking the gated jack when the gating jack is plugged/unplugged. This allows handling of devices where the mic jack detect floats when the headphone jack is unplugged. [Rewritten for fixing the possible snd_array reallocation, covering the missing callback calls and jack sync operations, as well as some code cleanups -- tiwai] Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 19:48:07 +01:00
call_jack_callback(codec, jack);
ALSA: hda - Implement a poll loop for jacks as a module parameter Now that we have a generic unsol mechanism, we can implement a generic poll loop, which can be used for debugging, or if a codec's unsol mechanism is broken. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-09 15:04:21 +02:00
}
if (changes)
snd_hda_jack_report_sync(codec);
}
EXPORT_SYMBOL_HDA(snd_hda_jack_poll_all);
Reference in New Issue Copy Permalink