iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/clk/pxa/clk-pxa27x.c

508 lines
14 KiB
C
Raw Normal View History

clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
/*
* Marvell PXA27x family clocks
*
* Copyright (C) 2014 Robert Jarzmik
*
* Heavily inspired from former arch/arm/mach-pxa/clock.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
*/
#include <linux/clk-provider.h>
#include <mach/pxa2xx-regs.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/of.h>
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
#include <mach/smemc.h>
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
#define KHz 1000
#define MHz (1000 * 1000)
enum {
PXA_CORE_13Mhz = 0,
PXA_CORE_RUN,
PXA_CORE_TURBO,
};
enum {
PXA_BUS_13Mhz = 0,
PXA_BUS_RUN,
};
enum {
PXA_LCD_13Mhz = 0,
PXA_LCD_RUN,
};
enum {
PXA_MEM_13Mhz = 0,
PXA_MEM_SYSTEM_BUS,
PXA_MEM_RUN,
};
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
#define PXA27x_CLKCFG(B, HT, T) \
(CLKCFG_FCS | \
((B) ? CLKCFG_FASTBUS : 0) | \
((HT) ? CLKCFG_HALFTURBO : 0) | \
((T) ? CLKCFG_TURBO : 0))
#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
/* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
static const char * const get_freq_khz[] = {
"core", "run", "cpll", "memory",
"system_bus"
};
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
static int get_sdram_rows(void)
{
static int sdram_rows;
unsigned int drac2 = 0, drac0 = 0;
u32 mdcnfg;
if (sdram_rows)
return sdram_rows;
mdcnfg = readl_relaxed(MDCNFG);
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
drac2 = MDCNFG_DRAC2(mdcnfg);
if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
drac0 = MDCNFG_DRAC0(mdcnfg);
sdram_rows = 1 << (11 + max(drac0, drac2));
return sdram_rows;
}
static u32 mdrefr_dri(unsigned int freq_khz)
{
u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
return (interval - 31) / 32;
}
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
/*
* Get the clock frequency as reflected by CCSR and the turbo flag.
* We assume these values have been applied via a fcs.
* If info is not 0 we also display the current settings.
*/
unsigned int pxa27x_get_clk_frequency_khz(int info)
{
struct clk *clk;
unsigned long clks[5];
int i;
for (i = 0; i < 5; i++) {
clk = clk_get(NULL, get_freq_khz[i]);
if (IS_ERR(clk)) {
clks[i] = 0;
} else {
clks[i] = clk_get_rate(clk);
clk_put(clk);
}
}
if (info) {
pr_info("Run Mode clock: %ld.%02ldMHz\n",
clks[1] / 1000000, (clks[1] % 1000000) / 10000);
pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
clks[2] / 1000000, (clks[2] % 1000000) / 10000);
pr_info("Memory clock: %ld.%02ldMHz\n",
clks[3] / 1000000, (clks[3] % 1000000) / 10000);
pr_info("System bus clock: %ld.%02ldMHz\n",
clks[4] / 1000000, (clks[4] % 1000000) / 10000);
}
clk: pxa: fix core frequency reporting unit Legacy drivers which are not yet ported, such as cpufreq-pxa[23]xx, rely on pxaXXx_get_clk_frequency_khz() to find the CPU core frequency. This reporting was broken because the expected unit is kHz and not Hz. Fix the reporting for pxa25x, pxa27x and pxa3xx. Fixes: fe7710fae477 ("clk: add pxa25x clock drivers") Fixes: d40670dc6169 ("clk: add pxa27x clock drivers") Fixes: 9bbb8a338fb2 ("clk: pxa: add pxa3xx clock driver") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-12 22:49:53 +02:00
return (unsigned int)clks[0] / KHz;
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
}
bool pxa27x_is_ppll_disabled(void)
{
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
return ccsr & (1 << CCCR_PPDIS_BIT);
}
#define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp, \
bit, is_lp, flags) \
PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp, \
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
is_lp, CKEN, CKEN_ ## bit, flags)
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
#define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \
PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp, \
div_hp, bit, pxa27x_is_ppll_disabled, 0)
PARENTS(pxa27x_pbus) = { "osc_13mhz", "ppll_312mhz" };
PARENTS(pxa27x_sbus) = { "system_bus", "system_bus" };
PARENTS(pxa27x_32Mhz_bus) = { "osc_32_768khz", "osc_32_768khz" };
PARENTS(pxa27x_lcd_bus) = { "lcd_base", "lcd_base" };
PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" };
#define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \
PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
CKEN, CKEN_ ## bit, 0)
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
#define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \
PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
clk: pxa: declare init function and data __init As the clock descriptions are constant and only usefull at init time, mark them as such by : - spliting clock description (desc) and clock private data (dynamic) - mark __initdata clock descriptions This makes all the register and descriptions of the clocks to go after kernel init phase. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-07 01:07:58 +02:00
static struct desc_clk_cken pxa27x_clocks[] __initdata = {
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1),
PXA27X_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 2, 42, 1),
PXA27X_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 2, 42, 1),
PXA27X_PBUS_CKEN("pxa2xx-i2s", NULL, I2S, 2, 51, 0),
PXA27X_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 19, 0),
PXA27X_PBUS_CKEN("pxa27x-udc", NULL, USB, 2, 13, 5),
PXA27X_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC, 2, 32, 0),
PXA27X_PBUS_CKEN("pxa2xx-ir", "FICPCLK", FICP, 2, 13, 0),
PXA27X_PBUS_CKEN("pxa27x-ohci", NULL, USBHOST, 2, 13, 0),
PXA27X_PBUS_CKEN("pxa2xx-i2c.1", NULL, PWRI2C, 1, 24, 0),
PXA27X_PBUS_CKEN("pxa27x-ssp.0", NULL, SSP1, 1, 24, 0),
PXA27X_PBUS_CKEN("pxa27x-ssp.1", NULL, SSP2, 1, 24, 0),
PXA27X_PBUS_CKEN("pxa27x-ssp.2", NULL, SSP3, 1, 24, 0),
PXA27X_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 24, 0),
PXA27X_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 24, 0),
PXA27X_PBUS_CKEN(NULL, "MSLCLK", MSL, 2, 13, 0),
PXA27X_PBUS_CKEN(NULL, "USIMCLK", USIM, 2, 13, 0),
PXA27X_PBUS_CKEN(NULL, "MSTKCLK", MEMSTK, 2, 32, 0),
PXA27X_PBUS_CKEN(NULL, "AC97CLK", AC97, 1, 1, 0),
PXA27X_PBUS_CKEN(NULL, "AC97CONFCLK", AC97CONF, 1, 1, 0),
PXA27X_PBUS_CKEN(NULL, "OSTIMER0", OSTIMER, 1, 96, 0),
PXA27X_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD,
pxa27x_32Mhz_bus_parents, 0),
PXA27X_CKEN_1RATE(NULL, "IMCLK", IM, pxa27x_sbus_parents, 0),
PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0),
PXA27X_CKEN_1RATE("pxa27x-camera.0", NULL, CAMERA,
pxa27x_lcd_bus_parents, 0),
PXA27X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC,
pxa27x_membus_parents, 0),
};
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
/*
* PXA270 definitions
*
* For the PXA27x:
* Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
*
* A = 0 => memory controller clock from table 3-7,
* A = 1 => memory controller clock = system bus clock
* Run mode frequency = 13 MHz * L
* Turbo mode frequency = 13 MHz * L * N
* System bus frequency = 13 MHz * L / (B + 1)
*
* In CCCR:
* A = 1
* L = 16 oscillator to run mode ratio
* 2N = 6 2 * (turbo mode to run mode ratio)
*
* In CCLKCFG:
* B = 1 Fast bus mode
* HT = 0 Half-Turbo mode
* T = 1 Turbo mode
*
* For now, just support some of the combinations in table 3-7 of
* PXA27x Processor Family Developer's Manual to simplify frequency
* change sequences.
*/
static struct pxa2xx_freq pxa27x_freqs[] = {
{104000000, 104000, PXA27x_CCCR(1, 8, 2), 0, PXA27x_CLKCFG(1, 0, 1) },
{156000000, 104000, PXA27x_CCCR(1, 8, 3), 0, PXA27x_CLKCFG(1, 0, 1) },
{208000000, 208000, PXA27x_CCCR(0, 16, 2), 1, PXA27x_CLKCFG(0, 0, 1) },
{312000000, 208000, PXA27x_CCCR(1, 16, 3), 1, PXA27x_CLKCFG(1, 0, 1) },
{416000000, 208000, PXA27x_CCCR(1, 16, 4), 1, PXA27x_CLKCFG(1, 0, 1) },
{520000000, 208000, PXA27x_CCCR(1, 16, 5), 1, PXA27x_CLKCFG(1, 0, 1) },
{624000000, 208000, PXA27x_CCCR(1, 16, 6), 1, PXA27x_CLKCFG(1, 0, 1) },
};
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned long clkcfg;
unsigned int t, ht;
unsigned int l, L, n2, N;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
t = clkcfg & (1 << 0);
ht = clkcfg & (1 << 2);
l = ccsr & CCSR_L_MASK;
n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
L = l * parent_rate;
N = (L * n2) / 2;
clk: pxa: core pll is not affected by t bit The t bit of clkfcfg doesn't affect the core pll clock, but it makes core clock select between core pll clock and core run clock. As such remove it from the core pll rate reporting function, while it remains in clk_pxa27x_core_get_parent(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-23 14:19:27 +02:00
return N;
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
}
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
static int clk_pxa27x_cpll_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
return pxa2xx_determine_rate(req, pxa27x_freqs,
ARRAY_SIZE(pxa27x_freqs));
}
static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
int i;
pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
for (i = 0; i < ARRAY_SIZE(pxa27x_freqs); i++)
if (pxa27x_freqs[i].cpll == rate)
break;
if (i >= ARRAY_SIZE(pxa27x_freqs))
return -EINVAL;
pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, MDREFR, CCCR);
return 0;
}
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" };
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
RATE_OPS(clk_pxa27x_cpll, "cpll");
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned int l, osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
unsigned long cccr = readl(CCCR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
l = ccsr & CCSR_L_MASK;
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced) {
if (cccr & (1 << CCCR_LCD_26_BIT))
return parent_rate * 2;
else
return parent_rate;
}
if (l <= 7)
return parent_rate;
if (l <= 16)
return parent_rate / 2;
return parent_rate / 4;
}
static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
return PXA_LCD_13Mhz;
else
return PXA_LCD_RUN;
}
PARENTS(clk_pxa27x_lcd_base) = { "osc_13mhz", "run" };
MUX_RO_RATE_RO_OPS(clk_pxa27x_lcd_base, "lcd_base");
static void __init pxa27x_register_plls(void)
{
clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
clk: pxa: Remove CLK_IS_ROOT This flag is a no-op now. Remove usage of the flag. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-01 10:59:56 -08:00
CLK_GET_RATE_NOCACHE,
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
13 * MHz);
clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
clk: pxa: Remove CLK_IS_ROOT This flag is a no-op now. Remove usage of the flag. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-01 10:59:56 -08:00
CLK_GET_RATE_NOCACHE,
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
32768 * KHz);
clk: pxa: Remove CLK_IS_ROOT This flag is a no-op now. Remove usage of the flag. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-01 10:59:56 -08:00
clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1);
}
static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
{
unsigned long clkcfg;
clk: pxa: remove unused variables This is a cleanup patch to remove unused values not used in their respective functions. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-23 14:19:26 +02:00
unsigned int t, ht, osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
return PXA_CORE_13Mhz;
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
t = clkcfg & (1 << 0);
ht = clkcfg & (1 << 2);
if (ht || t)
return PXA_CORE_TURBO;
return PXA_CORE_RUN;
}
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
static int clk_pxa27x_core_set_parent(struct clk_hw *hw, u8 index)
{
if (index > PXA_CORE_TURBO)
return -EINVAL;
pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
return 0;
}
static int clk_pxa27x_core_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
return __clk_mux_determine_rate(hw, req);
}
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" };
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 22:33:06 +01:00
MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
return (parent_rate / n2) * 2;
}
PARENTS(clk_pxa27x_run) = { "cpll" };
RATE_RO_OPS(clk_pxa27x_run, "run");
static void __init pxa27x_register_core(void)
{
clk: pxa: export core clocks pxaxxx_get_clk_frequency_khz() needs several clocks to be available through clk_get(), ie. the cpu clocks, system bus clock and memory clocks. Add the missing clkdev so that their rate can be acquired. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-23 14:19:29 +02:00
clkdev_pxa_register(CLK_NONE, "cpll", NULL,
clk_register_clk_pxa27x_cpll());
clkdev_pxa_register(CLK_NONE, "run", NULL,
clk_register_clk_pxa27x_run());
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
clkdev_pxa_register(CLK_CORE, "core", NULL,
clk_register_clk_pxa27x_core());
}
static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned long clkcfg;
unsigned int b, osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
b = clkcfg & (1 << 3);
if (osc_forced)
return parent_rate;
if (b)
return parent_rate;
clk: pxa: b bit of clkcfg means fast bus The meaning of this bit was inverted : - when set to 0, system bus clock is half of the CPU run clock - when set to 1, system bus clock is the CPU run clock Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-23 14:19:28 +02:00
else
return parent_rate / 2;
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
}
static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
if (osc_forced)
return PXA_BUS_13Mhz;
else
return PXA_BUS_RUN;
}
PARENTS(clk_pxa27x_system_bus) = { "osc_13mhz", "run" };
MUX_RO_RATE_RO_OPS(clk_pxa27x_system_bus, "system_bus");
static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned int a, l, osc_forced;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long cccr = readl(CCCR);
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
clk: pxa: fix pxa27x CCCR bit usage Trivial fix to check the A bit of CCCR for memory frequency calculations, where the shift of the bit index was missing, triggering a wrong calculation of memory frequency. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-07 01:07:57 +02:00
a = cccr & (1 << CCCR_A_BIT);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
l = ccsr & CCSR_L_MASK;
if (osc_forced || a)
return parent_rate;
if (l <= 10)
return parent_rate;
if (l <= 20)
return parent_rate / 2;
return parent_rate / 4;
}
static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw)
{
unsigned int osc_forced, a;
ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-01-29 15:06:25 +01:00
unsigned long cccr = readl(CCCR);
unsigned long ccsr = readl(CCSR);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
clk: pxa: fix pxa27x CCCR bit usage Trivial fix to check the A bit of CCCR for memory frequency calculations, where the shift of the bit index was missing, triggering a wrong calculation of memory frequency. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-07 01:07:57 +02:00
a = cccr & (1 << CCCR_A_BIT);
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
if (osc_forced)
return PXA_MEM_13Mhz;
if (a)
return PXA_MEM_SYSTEM_BUS;
else
return PXA_MEM_RUN;
}
PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" };
MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory");
clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc Add 2 clocks which were erronously forgotten by the clock framework port, namely : - sa1100-rtc - irda for pxa2xx-ir:UARTCLK Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Michael Turquette <mturquette@linaro.org>
2014-12-27 14:55:28 +01:00
#define DUMMY_CLK(_con_id, _dev_id, _parent) \
{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
struct dummy_clk {
const char *con_id;
const char *dev_id;
const char *parent;
};
static struct dummy_clk dummy_clks[] __initdata = {
DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
};
static void __init pxa27x_dummy_clocks_init(void)
{
struct clk *clk;
struct dummy_clk *d;
const char *name;
int i;
for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
d = &dummy_clks[i];
name = d->dev_id ? d->dev_id : d->con_id;
clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
clk_register_clkdev(clk, d->con_id, d->dev_id);
}
}
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
static void __init pxa27x_base_clocks_init(void)
{
pxa27x_register_plls();
pxa27x_register_core();
clk: pxa: export core clocks pxaxxx_get_clk_frequency_khz() needs several clocks to be available through clk_get(), ie. the cpu clocks, system bus clock and memory clocks. Add the missing clkdev so that their rate can be acquired. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-23 14:19:29 +02:00
clkdev_pxa_register(CLK_NONE, "system_bus", NULL,
clk_register_clk_pxa27x_system_bus());
clkdev_pxa_register(CLK_NONE, "memory", NULL,
clk_register_clk_pxa27x_memory());
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
clk_register_clk_pxa27x_lcd_base();
}
ARM: pxa: change clocks init sequence Since pxa clocks were ported to the clock framework, an ordering issue appears between clocks and clocksource initialization. As a consequence, the pxa timer clock cannot be acquired in pxa_timer, and is disabled by clock framework because it is "unused". The ordering issue is that in the kernel boot sequence : start_kernel() ... time_init() -> pxa_timer() -> here the clocksource is initialized ... rest_init() kernel_init() initcalls -> here the clocks are initialized In the current sequence, the clocks are initialized way after pxa_timer, which cannot acquire the OSTIMER0 clock. To solve this issue, the clocks initialization is moved to pxa_timer(), so that clocks are initialized before clocksource for non device-tree. For device-tree, the standard arm time_init() will take care of the ordering. Reviewed-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2014-12-27 14:55:25 +01:00
int __init pxa27x_clocks_init(void)
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
{
pxa27x_base_clocks_init();
clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc Add 2 clocks which were erronously forgotten by the clock framework port, namely : - sa1100-rtc - irda for pxa2xx-ir:UARTCLK Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Michael Turquette <mturquette@linaro.org>
2014-12-27 14:55:28 +01:00
pxa27x_dummy_clocks_init();
clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-30 22:51:02 +02:00
return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks));
}
clk: pxa: keep clocks initialization separated per variant Have each pxa variant (pxa25x, pxa27x, pxa3xx) have its own device-tree clock initializing function, to be able to register its own specific core clocks. Apply that change specifically to pxa27x. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-07 01:07:59 +02:00
static void __init pxa27x_dt_clocks_init(struct device_node *np)
{
pxa27x_clocks_init();
clk_pxa_dt_common_init(np);
}
CLK_OF_DECLARE(pxa_clks, "marvell,pxa270-clocks", pxa27x_dt_clocks_init);
Reference in New Issue Copy Permalink