linux/drivers/remoteproc/remoteproc_virtio.c

602 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/*
* Remote processor messaging transport (OMAP platform-specific bits)
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2011 Google, Inc.
*
* Ohad Ben-Cohen <ohad@wizery.com>
* Brian Swetland <swetland@google.com>
*/
#include <linux/dma-direct.h>
#include <linux/dma-map-ops.h>
#include <linux/dma-mapping.h>
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
#include <linux/export.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
#include <linux/remoteproc.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_ring.h>
#include <linux/err.h>
#include <linux/kref.h>
#include <linux/slab.h>
#include "remoteproc_internal.h"
static int copy_dma_range_map(struct device *to, struct device *from)
{
const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
int num_ranges = 0;
if (!map)
return 0;
for (r = map; r->size; r++)
num_ranges++;
new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
GFP_KERNEL);
if (!new_map)
return -ENOMEM;
to->dma_range_map = new_map;
return 0;
}
static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
{
struct platform_device *pdev;
pdev = container_of(vdev->dev.parent, struct platform_device, dev);
return platform_get_drvdata(pdev);
}
static struct rproc *vdev_to_rproc(struct virtio_device *vdev)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
return rvdev->rproc;
}
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/* kick the remote processor, and let it know which virtqueue to poke at */
static bool rproc_virtio_notify(struct virtqueue *vq)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vring *rvring = vq->priv;
struct rproc *rproc = rvring->rvdev->rproc;
int notifyid = rvring->notifyid;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
remoteproc: maintain a generic child device for each rproc For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-05-30 23:01:25 +04:00
dev_dbg(&rproc->dev, "kicking vq index: %d\n", notifyid);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
rproc->ops->kick(rproc, notifyid);
return true;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
/**
* rproc_vq_interrupt() - tell remoteproc that a virtqueue is interrupted
* @rproc: handle to the remote processor
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
* @notifyid: index of the signalled virtqueue (unique per this @rproc)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*
* This function should be called by the platform-specific rproc driver,
* when the remote processor signals that a specific virtqueue has pending
* messages available.
*
* Return: IRQ_NONE if no message was found in the @notifyid virtqueue,
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
* and otherwise returns IRQ_HANDLED.
*/
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vring *rvring;
remoteproc: maintain a generic child device for each rproc For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-05-30 23:01:25 +04:00
dev_dbg(&rproc->dev, "vq index %d is interrupted\n", notifyid);
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
rvring = idr_find(&rproc->notifyids, notifyid);
if (!rvring || !rvring->vq)
return IRQ_NONE;
return vring_interrupt(0, rvring->vq);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
EXPORT_SYMBOL(rproc_vq_interrupt);
static struct virtqueue *rp_find_vq(struct virtio_device *vdev,
unsigned int id,
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
void (*callback)(struct virtqueue *vq),
const char *name, bool ctx)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
struct rproc *rproc = vdev_to_rproc(vdev);
remoteproc: maintain a generic child device for each rproc For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-05-30 23:01:25 +04:00
struct device *dev = &rproc->dev;
struct rproc_mem_entry *mem;
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vring *rvring;
struct fw_rsc_vdev *rsc;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
struct virtqueue *vq;
void *addr;
int num, size;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
/* we're temporarily limited to two virtqueues per rvdev */
if (id >= ARRAY_SIZE(rvdev->vring))
return ERR_PTR(-EINVAL);
if (!name)
return NULL;
/* Search allocated memory region by name */
mem = rproc_find_carveout_by_name(rproc, "vdev%dvring%d", rvdev->index,
id);
if (!mem || !mem->va)
return ERR_PTR(-ENOMEM);
rvring = &rvdev->vring[id];
addr = mem->va;
num = rvring->num;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
/* zero vring */
size = vring_size(num, rvring->align);
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
memset(addr, 0, size);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
dev_dbg(dev, "vring%d: va %pK qsz %d notifyid %d\n",
id, addr, num, rvring->notifyid);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/*
* Create the new vq, and tell virtio we're not interested in
* the 'weak' smp barriers, since we're talking with a real device.
*/
vq = vring_new_virtqueue(id, num, rvring->align, vdev, false, ctx,
addr, rproc_virtio_notify, callback, name);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
if (!vq) {
remoteproc: maintain a generic child device for each rproc For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-05-30 23:01:25 +04:00
dev_err(dev, "vring_new_virtqueue %s failed\n", name);
rproc_free_vring(rvring);
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
return ERR_PTR(-ENOMEM);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
vq->num_max = num;
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
rvring->vq = vq;
vq->priv = rvring;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/* Update vring in resource table */
rsc = (void *)rproc->table_ptr + rvdev->rsc_offset;
rsc->vring[id].da = mem->da;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
return vq;
}
static void __rproc_virtio_del_vqs(struct virtio_device *vdev)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
struct virtqueue *vq, *n;
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vring *rvring;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
rvring = vq->priv;
rvring->vq = NULL;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
vring_del_virtqueue(vq);
}
}
static void rproc_virtio_del_vqs(struct virtio_device *vdev)
{
__rproc_virtio_del_vqs(vdev);
}
static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned int nvqs,
struct virtqueue *vqs[],
vq_callback_t *callbacks[],
const char * const names[],
const bool * ctx,
struct irq_affinity *desc)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
int i, ret, queue_idx = 0;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
for (i = 0; i < nvqs; ++i) {
if (!names[i]) {
vqs[i] = NULL;
continue;
}
vqs[i] = rp_find_vq(vdev, queue_idx++, callbacks[i], names[i],
ctx ? ctx[i] : false);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
if (IS_ERR(vqs[i])) {
ret = PTR_ERR(vqs[i]);
goto error;
}
}
return 0;
error:
__rproc_virtio_del_vqs(vdev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
return ret;
}
static u8 rproc_virtio_get_status(struct virtio_device *vdev)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
return rsc->status;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
static void rproc_virtio_set_status(struct virtio_device *vdev, u8 status)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
rsc->status = status;
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
dev_dbg(&vdev->dev, "status: %d\n", status);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
static void rproc_virtio_reset(struct virtio_device *vdev)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
rsc->status = 0;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
dev_dbg(&vdev->dev, "reset !\n");
}
/* provide the vdev features as retrieved from the firmware */
static u64 rproc_virtio_get_features(struct virtio_device *vdev)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
return rsc->dfeatures;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
static void rproc_transport_features(struct virtio_device *vdev)
{
/*
* Packed ring isn't enabled on remoteproc for now,
* because remoteproc uses vring_new_virtqueue() which
* creates virtio rings on preallocated memory.
*/
__virtio_clear_bit(vdev, VIRTIO_F_RING_PACKED);
}
static int rproc_virtio_finalize_features(struct virtio_device *vdev)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/* Give virtio_ring a chance to accept features */
vring_transport_features(vdev);
/* Give virtio_rproc a chance to accept features. */
rproc_transport_features(vdev);
/* Make sure we don't have any features > 32 bits! */
BUG_ON((u32)vdev->features != vdev->features);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/*
* Remember the finalized features of our vdev, and provide it
* to the remote processor once it is powered on.
*/
rsc->gfeatures = vdev->features;
return 0;
}
static void rproc_virtio_get(struct virtio_device *vdev, unsigned int offset,
void *buf, unsigned int len)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
void *cfg;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
cfg = &rsc->vring[rsc->num_of_vrings];
if (offset + len > rsc->config_len || offset + len < len) {
dev_err(&vdev->dev, "rproc_virtio_get: access out of bounds\n");
return;
}
memcpy(buf, cfg + offset, len);
}
static void rproc_virtio_set(struct virtio_device *vdev, unsigned int offset,
const void *buf, unsigned int len)
{
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
struct fw_rsc_vdev *rsc;
void *cfg;
rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset;
cfg = &rsc->vring[rsc->num_of_vrings];
if (offset + len > rsc->config_len || offset + len < len) {
dev_err(&vdev->dev, "rproc_virtio_set: access out of bounds\n");
return;
}
memcpy(cfg + offset, buf, len);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
static const struct virtio_config_ops rproc_virtio_config_ops = {
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
.get_features = rproc_virtio_get_features,
.finalize_features = rproc_virtio_finalize_features,
.find_vqs = rproc_virtio_find_vqs,
.del_vqs = rproc_virtio_del_vqs,
.reset = rproc_virtio_reset,
.set_status = rproc_virtio_set_status,
.get_status = rproc_virtio_get_status,
.get = rproc_virtio_get,
.set = rproc_virtio_set,
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
};
/*
* This function is called whenever vdev is released, and is responsible
* to decrement the remote processor's refcount which was taken when vdev was
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
* added.
*
* Never call this function directly; it will be called by the driver
* core when needed.
*/
static void rproc_virtio_dev_release(struct device *dev)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
struct virtio_device *vdev = dev_to_virtio(dev);
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
kfree(vdev);
put_device(&rvdev->pdev->dev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
/**
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
* rproc_add_virtio_dev() - register an rproc-induced virtio device
* @rvdev: the remote vdev
* @id: the device type identification (used to match it with a driver).
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
* This function registers a virtio device. This vdev's partent is
* the rproc device.
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*
* Return: 0 on success or an appropriate error value otherwise
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*/
static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
struct rproc *rproc = rvdev->rproc;
struct device *dev = &rvdev->pdev->dev;
struct virtio_device *vdev;
struct rproc_mem_entry *mem;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
int ret;
remoteproc: Fix NULL pointer dereference in rproc_virtio_notify Undefined rproc_ops .kick method in remoteproc driver will result in "Unable to handle kernel NULL pointer dereference" in rproc_virtio_notify, after firmware loading if: 1) .kick method wasn't defined in driver 2) resource_table exists in firmware and has "Virtio device entry" defined Let's refuse to register an rproc-induced virtio device if no kick method was defined for rproc. [ 13.180049][ T415] 8<--- cut here --- [ 13.190558][ T415] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 13.212544][ T415] pgd = (ptrval) [ 13.217052][ T415] [00000000] *pgd=00000000 [ 13.224692][ T415] Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM [ 13.231318][ T415] Modules linked in: rpmsg_char imx_rproc virtio_rpmsg_bus rpmsg_core [last unloaded: imx_rproc] [ 13.241687][ T415] CPU: 0 PID: 415 Comm: unload-load.sh Not tainted 5.5.2-00002-g707df13bbbdd #6 [ 13.250561][ T415] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 13.257009][ T415] PC is at 0x0 [ 13.260249][ T415] LR is at rproc_virtio_notify+0x2c/0x54 [ 13.265738][ T415] pc : [<00000000>] lr : [<8050f6b0>] psr: 60010113 [ 13.272702][ T415] sp : b8d47c48 ip : 00000001 fp : bc04de00 [ 13.278625][ T415] r10: bc04c000 r9 : 00000cc0 r8 : b8d46000 [ 13.284548][ T415] r7 : 00000000 r6 : b898f200 r5 : 00000000 r4 : b8a29800 [ 13.291773][ T415] r3 : 00000000 r2 : 990a3ad4 r1 : 00000000 r0 : b8a29800 [ 13.299000][ T415] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 13.306833][ T415] Control: 10c5387d Table: b8b4806a DAC: 00000051 [ 13.313278][ T415] Process unload-load.sh (pid: 415, stack limit = 0x(ptrval)) [ 13.320591][ T415] Stack: (0xb8d47c48 to 0xb8d48000) [ 13.325651][ T415] 7c40: b895b680 00000001 b898f200 803c6430 b895bc80 7f00ae18 [ 13.334531][ T415] 7c60: 00000035 00000000 00000000 b9393200 80b3ed80 00004000 b9393268 bbf5a9a2 [ 13.343410][ T415] 7c80: 00000e00 00000200 00000000 7f00aff0 7f00a014 b895b680 b895b800 990a3ad4 [ 13.352290][ T415] 7ca0: 00000001 b898f210 b898f200 00000000 00000000 7f00e000 00000001 00000000 [ 13.361170][ T415] 7cc0: 00000000 803c62e0 80b2169c 802a0924 b898f210 00000000 00000000 b898f210 [ 13.370049][ T415] 7ce0: 80b9ba44 00000000 80b9ba48 00000000 7f00e000 00000008 80b2169c 80400114 [ 13.378929][ T415] 7d00: 80b2169c 8061fd64 b898f210 7f00e000 80400744 b8d46000 80b21634 80b21634 [ 13.387809][ T415] 7d20: 80b2169c 80400614 80b21634 80400718 7f00e000 00000000 b8d47d7c 80400744 [ 13.396689][ T415] 7d40: b8d46000 80b21634 80b21634 803fe338 b898f254 b80fe76c b8d32e38 990a3ad4 [ 13.405569][ T415] 7d60: fffffff3 b898f210 b8d46000 00000001 b898f254 803ffe7c 80857a90 b898f210 [ 13.414449][ T415] 7d80: 00000001 990a3ad4 b8d46000 b898f210 b898f210 80b17aec b8a29c20 803ff0a4 [ 13.423328][ T415] 7da0: b898f210 00000000 b8d46000 803fb8e0 b898f200 00000000 80b17aec b898f210 [ 13.432209][ T415] 7dc0: b8a29c20 990a3ad4 b895b900 b898f200 8050fb7c 80b17aec b898f210 b8a29c20 [ 13.441088][ T415] 7de0: b8a29800 b895b900 b8a29a04 803c5ec0 b8a29c00 b898f200 b8a29a20 00000007 [ 13.449968][ T415] 7e00: b8a29c20 8050fd78 b8a29800 00000000 b8a29a20 b8a29c04 b8a29820 b8a299d0 [ 13.458848][ T415] 7e20: b895b900 8050e5a4 b8a29800 b8a299d8 b8d46000 b8a299e0 b8a29820 b8a299d0 [ 13.467728][ T415] 7e40: b895b900 8050e008 000041ed 00000000 b8b8c440 b8a299d8 b8a299e0 b8a299d8 [ 13.476608][ T415] 7e60: b8b8c440 990a3ad4 00000000 b8a29820 b8b8c400 00000006 b8a29800 b895b880 [ 13.485487][ T415] 7e80: b8d47f78 00000000 00000000 8050f4b4 00000006 b895b890 b8b8c400 008fbea0 [ 13.494367][ T415] 7ea0: b895b880 8029f530 00000000 00000000 b8d46000 00000006 b8d46000 008fbea0 [ 13.503246][ T415] 7ec0: 8029f434 00000000 b8d46000 00000000 00000000 8021e2e4 0000000a 8061fd0c [ 13.512125][ T415] 7ee0: 0000000a b8af0c00 0000000a b8af0c40 00000001 b8af0c40 00000000 8061f910 [ 13.521005][ T415] 7f00: 0000000a 80240af4 00000002 b8d46000 00000000 8061fd0c 00000002 80232d7c [ 13.529884][ T415] 7f20: 00000000 b8d46000 00000000 990a3ad4 00000000 00000006 b8a62d80 008fbea0 [ 13.538764][ T415] 7f40: b8d47f78 00000000 b8d46000 00000000 00000000 802210c0 b88f2900 00000000 [ 13.547644][ T415] 7f60: b8a62d80 b8a62d80 b8d46000 00000006 008fbea0 80221320 00000000 00000000 [ 13.556524][ T415] 7f80: b8af0c00 990a3ad4 0000006c 008fbea0 76f1cda0 00000004 80101204 00000004 [ 13.565403][ T415] 7fa0: 00000000 80101000 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.574283][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.583162][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 600d0030 00000001 00000000 00000000 [ 13.592056][ T415] [<8050f6b0>] (rproc_virtio_notify) from [<803c6430>] (virtqueue_notify+0x1c/0x34) [ 13.601298][ T415] [<803c6430>] (virtqueue_notify) from [<7f00ae18>] (rpmsg_probe+0x280/0x380 [virtio_rpmsg_bus]) [ 13.611663][ T415] [<7f00ae18>] (rpmsg_probe [virtio_rpmsg_bus]) from [<803c62e0>] (virtio_dev_probe+0x1f8/0x2c4) [ 13.622022][ T415] [<803c62e0>] (virtio_dev_probe) from [<80400114>] (really_probe+0x200/0x450) [ 13.630817][ T415] [<80400114>] (really_probe) from [<80400614>] (driver_probe_device+0x16c/0x1ac) [ 13.639873][ T415] [<80400614>] (driver_probe_device) from [<803fe338>] (bus_for_each_drv+0x84/0xc8) [ 13.649102][ T415] [<803fe338>] (bus_for_each_drv) from [<803ffe7c>] (__device_attach+0xd4/0x164) [ 13.658069][ T415] [<803ffe7c>] (__device_attach) from [<803ff0a4>] (bus_probe_device+0x84/0x8c) [ 13.666950][ T415] [<803ff0a4>] (bus_probe_device) from [<803fb8e0>] (device_add+0x444/0x768) [ 13.675572][ T415] [<803fb8e0>] (device_add) from [<803c5ec0>] (register_virtio_device+0xa4/0xfc) [ 13.684541][ T415] [<803c5ec0>] (register_virtio_device) from [<8050fd78>] (rproc_add_virtio_dev+0xcc/0x1b8) [ 13.694466][ T415] [<8050fd78>] (rproc_add_virtio_dev) from [<8050e5a4>] (rproc_start+0x148/0x200) [ 13.703521][ T415] [<8050e5a4>] (rproc_start) from [<8050e008>] (rproc_boot+0x384/0x5c0) [ 13.711708][ T415] [<8050e008>] (rproc_boot) from [<8050f4b4>] (state_store+0x3c/0xc8) [ 13.719723][ T415] [<8050f4b4>] (state_store) from [<8029f530>] (kernfs_fop_write+0xfc/0x214) [ 13.728348][ T415] [<8029f530>] (kernfs_fop_write) from [<8021e2e4>] (__vfs_write+0x30/0x1cc) [ 13.736971][ T415] [<8021e2e4>] (__vfs_write) from [<802210c0>] (vfs_write+0xac/0x17c) [ 13.744985][ T415] [<802210c0>] (vfs_write) from [<80221320>] (ksys_write+0x64/0xe4) [ 13.752825][ T415] [<80221320>] (ksys_write) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 13.761178][ T415] Exception stack(0xb8d47fa8 to 0xb8d47ff0) [ 13.766932][ T415] 7fa0: 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.775811][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.784687][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 [ 13.790442][ T415] Code: bad PC value [ 13.839214][ T415] ---[ end trace 1fe21ecfc9f28852 ]--- Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Nikita Shubin <NShubin@topcon.com> Fixes: 7a186941626d ("remoteproc: remove the single rpmsg vdev limitation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306072452.24743-1-NShubin@topcon.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-06 10:24:53 +03:00
if (rproc->ops->kick == NULL) {
ret = -EINVAL;
dev_err(dev, ".kick method not defined for %s\n", rproc->name);
remoteproc: Fix NULL pointer dereference in rproc_virtio_notify Undefined rproc_ops .kick method in remoteproc driver will result in "Unable to handle kernel NULL pointer dereference" in rproc_virtio_notify, after firmware loading if: 1) .kick method wasn't defined in driver 2) resource_table exists in firmware and has "Virtio device entry" defined Let's refuse to register an rproc-induced virtio device if no kick method was defined for rproc. [ 13.180049][ T415] 8<--- cut here --- [ 13.190558][ T415] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 13.212544][ T415] pgd = (ptrval) [ 13.217052][ T415] [00000000] *pgd=00000000 [ 13.224692][ T415] Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM [ 13.231318][ T415] Modules linked in: rpmsg_char imx_rproc virtio_rpmsg_bus rpmsg_core [last unloaded: imx_rproc] [ 13.241687][ T415] CPU: 0 PID: 415 Comm: unload-load.sh Not tainted 5.5.2-00002-g707df13bbbdd #6 [ 13.250561][ T415] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 13.257009][ T415] PC is at 0x0 [ 13.260249][ T415] LR is at rproc_virtio_notify+0x2c/0x54 [ 13.265738][ T415] pc : [<00000000>] lr : [<8050f6b0>] psr: 60010113 [ 13.272702][ T415] sp : b8d47c48 ip : 00000001 fp : bc04de00 [ 13.278625][ T415] r10: bc04c000 r9 : 00000cc0 r8 : b8d46000 [ 13.284548][ T415] r7 : 00000000 r6 : b898f200 r5 : 00000000 r4 : b8a29800 [ 13.291773][ T415] r3 : 00000000 r2 : 990a3ad4 r1 : 00000000 r0 : b8a29800 [ 13.299000][ T415] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 13.306833][ T415] Control: 10c5387d Table: b8b4806a DAC: 00000051 [ 13.313278][ T415] Process unload-load.sh (pid: 415, stack limit = 0x(ptrval)) [ 13.320591][ T415] Stack: (0xb8d47c48 to 0xb8d48000) [ 13.325651][ T415] 7c40: b895b680 00000001 b898f200 803c6430 b895bc80 7f00ae18 [ 13.334531][ T415] 7c60: 00000035 00000000 00000000 b9393200 80b3ed80 00004000 b9393268 bbf5a9a2 [ 13.343410][ T415] 7c80: 00000e00 00000200 00000000 7f00aff0 7f00a014 b895b680 b895b800 990a3ad4 [ 13.352290][ T415] 7ca0: 00000001 b898f210 b898f200 00000000 00000000 7f00e000 00000001 00000000 [ 13.361170][ T415] 7cc0: 00000000 803c62e0 80b2169c 802a0924 b898f210 00000000 00000000 b898f210 [ 13.370049][ T415] 7ce0: 80b9ba44 00000000 80b9ba48 00000000 7f00e000 00000008 80b2169c 80400114 [ 13.378929][ T415] 7d00: 80b2169c 8061fd64 b898f210 7f00e000 80400744 b8d46000 80b21634 80b21634 [ 13.387809][ T415] 7d20: 80b2169c 80400614 80b21634 80400718 7f00e000 00000000 b8d47d7c 80400744 [ 13.396689][ T415] 7d40: b8d46000 80b21634 80b21634 803fe338 b898f254 b80fe76c b8d32e38 990a3ad4 [ 13.405569][ T415] 7d60: fffffff3 b898f210 b8d46000 00000001 b898f254 803ffe7c 80857a90 b898f210 [ 13.414449][ T415] 7d80: 00000001 990a3ad4 b8d46000 b898f210 b898f210 80b17aec b8a29c20 803ff0a4 [ 13.423328][ T415] 7da0: b898f210 00000000 b8d46000 803fb8e0 b898f200 00000000 80b17aec b898f210 [ 13.432209][ T415] 7dc0: b8a29c20 990a3ad4 b895b900 b898f200 8050fb7c 80b17aec b898f210 b8a29c20 [ 13.441088][ T415] 7de0: b8a29800 b895b900 b8a29a04 803c5ec0 b8a29c00 b898f200 b8a29a20 00000007 [ 13.449968][ T415] 7e00: b8a29c20 8050fd78 b8a29800 00000000 b8a29a20 b8a29c04 b8a29820 b8a299d0 [ 13.458848][ T415] 7e20: b895b900 8050e5a4 b8a29800 b8a299d8 b8d46000 b8a299e0 b8a29820 b8a299d0 [ 13.467728][ T415] 7e40: b895b900 8050e008 000041ed 00000000 b8b8c440 b8a299d8 b8a299e0 b8a299d8 [ 13.476608][ T415] 7e60: b8b8c440 990a3ad4 00000000 b8a29820 b8b8c400 00000006 b8a29800 b895b880 [ 13.485487][ T415] 7e80: b8d47f78 00000000 00000000 8050f4b4 00000006 b895b890 b8b8c400 008fbea0 [ 13.494367][ T415] 7ea0: b895b880 8029f530 00000000 00000000 b8d46000 00000006 b8d46000 008fbea0 [ 13.503246][ T415] 7ec0: 8029f434 00000000 b8d46000 00000000 00000000 8021e2e4 0000000a 8061fd0c [ 13.512125][ T415] 7ee0: 0000000a b8af0c00 0000000a b8af0c40 00000001 b8af0c40 00000000 8061f910 [ 13.521005][ T415] 7f00: 0000000a 80240af4 00000002 b8d46000 00000000 8061fd0c 00000002 80232d7c [ 13.529884][ T415] 7f20: 00000000 b8d46000 00000000 990a3ad4 00000000 00000006 b8a62d80 008fbea0 [ 13.538764][ T415] 7f40: b8d47f78 00000000 b8d46000 00000000 00000000 802210c0 b88f2900 00000000 [ 13.547644][ T415] 7f60: b8a62d80 b8a62d80 b8d46000 00000006 008fbea0 80221320 00000000 00000000 [ 13.556524][ T415] 7f80: b8af0c00 990a3ad4 0000006c 008fbea0 76f1cda0 00000004 80101204 00000004 [ 13.565403][ T415] 7fa0: 00000000 80101000 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.574283][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.583162][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 600d0030 00000001 00000000 00000000 [ 13.592056][ T415] [<8050f6b0>] (rproc_virtio_notify) from [<803c6430>] (virtqueue_notify+0x1c/0x34) [ 13.601298][ T415] [<803c6430>] (virtqueue_notify) from [<7f00ae18>] (rpmsg_probe+0x280/0x380 [virtio_rpmsg_bus]) [ 13.611663][ T415] [<7f00ae18>] (rpmsg_probe [virtio_rpmsg_bus]) from [<803c62e0>] (virtio_dev_probe+0x1f8/0x2c4) [ 13.622022][ T415] [<803c62e0>] (virtio_dev_probe) from [<80400114>] (really_probe+0x200/0x450) [ 13.630817][ T415] [<80400114>] (really_probe) from [<80400614>] (driver_probe_device+0x16c/0x1ac) [ 13.639873][ T415] [<80400614>] (driver_probe_device) from [<803fe338>] (bus_for_each_drv+0x84/0xc8) [ 13.649102][ T415] [<803fe338>] (bus_for_each_drv) from [<803ffe7c>] (__device_attach+0xd4/0x164) [ 13.658069][ T415] [<803ffe7c>] (__device_attach) from [<803ff0a4>] (bus_probe_device+0x84/0x8c) [ 13.666950][ T415] [<803ff0a4>] (bus_probe_device) from [<803fb8e0>] (device_add+0x444/0x768) [ 13.675572][ T415] [<803fb8e0>] (device_add) from [<803c5ec0>] (register_virtio_device+0xa4/0xfc) [ 13.684541][ T415] [<803c5ec0>] (register_virtio_device) from [<8050fd78>] (rproc_add_virtio_dev+0xcc/0x1b8) [ 13.694466][ T415] [<8050fd78>] (rproc_add_virtio_dev) from [<8050e5a4>] (rproc_start+0x148/0x200) [ 13.703521][ T415] [<8050e5a4>] (rproc_start) from [<8050e008>] (rproc_boot+0x384/0x5c0) [ 13.711708][ T415] [<8050e008>] (rproc_boot) from [<8050f4b4>] (state_store+0x3c/0xc8) [ 13.719723][ T415] [<8050f4b4>] (state_store) from [<8029f530>] (kernfs_fop_write+0xfc/0x214) [ 13.728348][ T415] [<8029f530>] (kernfs_fop_write) from [<8021e2e4>] (__vfs_write+0x30/0x1cc) [ 13.736971][ T415] [<8021e2e4>] (__vfs_write) from [<802210c0>] (vfs_write+0xac/0x17c) [ 13.744985][ T415] [<802210c0>] (vfs_write) from [<80221320>] (ksys_write+0x64/0xe4) [ 13.752825][ T415] [<80221320>] (ksys_write) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 13.761178][ T415] Exception stack(0xb8d47fa8 to 0xb8d47ff0) [ 13.766932][ T415] 7fa0: 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.775811][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.784687][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 [ 13.790442][ T415] Code: bad PC value [ 13.839214][ T415] ---[ end trace 1fe21ecfc9f28852 ]--- Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Nikita Shubin <NShubin@topcon.com> Fixes: 7a186941626d ("remoteproc: remove the single rpmsg vdev limitation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306072452.24743-1-NShubin@topcon.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-06 10:24:53 +03:00
goto out;
}
/* Try to find dedicated vdev buffer carveout */
mem = rproc_find_carveout_by_name(rproc, "vdev%dbuffer", rvdev->index);
if (mem) {
phys_addr_t pa;
if (mem->of_resm_idx != -1) {
struct device_node *np = rproc->dev.parent->of_node;
/* Associate reserved memory to vdev device */
ret = of_reserved_mem_device_init_by_idx(dev, np,
mem->of_resm_idx);
if (ret) {
dev_err(dev, "Can't associate reserved memory\n");
goto out;
}
} else {
if (mem->va) {
dev_warn(dev, "vdev %d buffer already mapped\n",
rvdev->index);
pa = rproc_va_to_pa(mem->va);
} else {
/* Use dma address as carveout no memmapped yet */
pa = (phys_addr_t)mem->dma;
}
/* Associate vdev buffer memory pool to vdev subdev */
ret = dma_declare_coherent_memory(dev, pa,
mem->da,
mem->len);
if (ret < 0) {
dev_err(dev, "Failed to associate buffer\n");
goto out;
}
}
} else {
struct device_node *np = rproc->dev.parent->of_node;
/*
* If we don't have dedicated buffer, just attempt to re-assign
* the reserved memory from our parent. A default memory-region
* at index 0 from the parent's memory-regions is assigned for
* the rvdev dev to allocate from. Failure is non-critical and
* the allocations will fall back to global pools, so don't
* check return value either.
*/
of_reserved_mem_device_init_by_idx(dev, np, 0);
}
/* Allocate virtio device */
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
ret = -ENOMEM;
goto out;
}
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
vdev->id.device = id,
vdev->config = &rproc_virtio_config_ops,
vdev->dev.parent = dev;
vdev->dev.release = rproc_virtio_dev_release;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
/* Reference the vdev and vring allocations */
get_device(dev);
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
ret = register_virtio_device(vdev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
if (ret) {
put_device(&vdev->dev);
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
dev_err(dev, "failed to register vdev: %d\n", ret);
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
goto out;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
dev_info(dev, "registered %s (type %d)\n", dev_name(&vdev->dev), id);
out:
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
return ret;
}
/**
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
* rproc_remove_virtio_dev() - remove an rproc-induced virtio device
* @dev: the virtio device
* @data: must be null
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*
remoteproc: remove the single rpmsg vdev limitation Now that the resource table supports publishing a virtio device in a single resource entry, firmware images can start supporting more than a single vdev. This patch removes the single vdev limitation of the remoteproc framework so multi-vdev firmwares can be leveraged: VDEV resource entries are parsed when the rproc is registered, and as a result their vrings are set up and the virtio devices are registered (and they go away when the rproc goes away). Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any virtio device type goes now. As a result, there's no more any rpmsg-specific APIs or code in remoteproc: it all becomes generic virtio handling. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Iliyan Malchev <malchev@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark Grosen <mgrosen@ti.com> Cc: John Williams <john.williams@petalogix.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Guzman Lugo Fernando <fernando.lugo@ti.com> Cc: Anna Suman <s-anna@ti.com> Cc: Clark Rob <rob@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Cc: Kieran Bingham <kieranbingham@gmail.com> Cc: Tony Lindgren <tony@atomide.com>
2012-02-14 01:30:39 +04:00
* This function unregisters an existing virtio device.
*
* Return: 0
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
*/
static int rproc_remove_virtio_dev(struct device *dev, void *data)
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
{
struct virtio_device *vdev = dev_to_virtio(dev);
unregister_virtio_device(vdev);
return 0;
remoteproc: create rpmsg virtio device Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, and that is useful for natural power management and DMA API behavior. - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 20:15:13 +04:00
}
static int rproc_vdev_do_start(struct rproc_subdev *subdev)
{
struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
return rproc_add_virtio_dev(rvdev, rvdev->id);
}
static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
{
struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
struct device *dev = &rvdev->pdev->dev;
int ret;
ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev);
if (ret)
dev_warn(dev, "can't remove vdev child device: %d\n", ret);
}
static int rproc_virtio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rproc_vdev_data *rvdev_data = dev->platform_data;
struct rproc_vdev *rvdev;
struct rproc *rproc = container_of(dev->parent, struct rproc, dev);
struct fw_rsc_vdev *rsc;
int i, ret;
if (!rvdev_data)
return -EINVAL;
rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL);
if (!rvdev)
return -ENOMEM;
rvdev->id = rvdev_data->id;
rvdev->rproc = rproc;
rvdev->index = rvdev_data->index;
ret = copy_dma_range_map(dev, rproc->dev.parent);
if (ret)
return ret;
/* Make device dma capable by inheriting from parent's capabilities */
set_dma_ops(dev, get_dma_ops(rproc->dev.parent));
ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent));
if (ret) {
dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
}
platform_set_drvdata(pdev, rvdev);
rvdev->pdev = pdev;
rsc = rvdev_data->rsc;
/* parse the vrings */
for (i = 0; i < rsc->num_of_vrings; i++) {
ret = rproc_parse_vring(rvdev, rsc, i);
if (ret)
return ret;
}
/* remember the resource offset*/
rvdev->rsc_offset = rvdev_data->rsc_offset;
/* allocate the vring resources */
for (i = 0; i < rsc->num_of_vrings; i++) {
ret = rproc_alloc_vring(rvdev, i);
if (ret)
goto unwind_vring_allocations;
}
rproc_add_rvdev(rproc, rvdev);
rvdev->subdev.start = rproc_vdev_do_start;
rvdev->subdev.stop = rproc_vdev_do_stop;
rproc_add_subdev(rproc, &rvdev->subdev);
/*
* We're indirectly making a non-temporary copy of the rproc pointer
* here, because the platform device or the vdev device will indirectly
* access the wrapping rproc.
*
* Therefore we must increment the rproc refcount here, and decrement
* it _only_ on platform remove.
*/
get_device(&rproc->dev);
return 0;
unwind_vring_allocations:
for (i--; i >= 0; i--)
rproc_free_vring(&rvdev->vring[i]);
return ret;
}
static void rproc_virtio_remove(struct platform_device *pdev)
{
struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev);
struct rproc *rproc = rvdev->rproc;
struct rproc_vring *rvring;
int id;
for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
rvring = &rvdev->vring[id];
rproc_free_vring(rvring);
}
rproc_remove_subdev(rproc, &rvdev->subdev);
rproc_remove_rvdev(rvdev);
of_reserved_mem_device_release(&pdev->dev);
dma_release_coherent_memory(&pdev->dev);
put_device(&rproc->dev);
}
/* Platform driver */
static struct platform_driver rproc_virtio_driver = {
.probe = rproc_virtio_probe,
.remove_new = rproc_virtio_remove,
.driver = {
.name = "rproc-virtio",
},
};
builtin_platform_driver(rproc_virtio_driver);