iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
37e14e4f37
linux/drivers/pinctrl/actions/pinctrl-s900.c

1831 lines
55 KiB
C
Raw Normal View History

pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
// SPDX-License-Identifier: GPL-2.0+
/*
* OWL S900 Pinctrl driver
*
* Copyright (c) 2014 Actions Semi Inc.
* Author: David Liu <liuwei@actions-semi.com>
*
* Copyright (c) 2018 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
pinctrl: actions: define pad control configurtion to SoC specific pad control for s900 and s700 are differs in number of pull control configuraions s900 has 4 pull controls - high impedence, pull up, pull down, repeater s700, s500 has 2 pull controls - pull up and pull down so pad control configuration has to SoC specific, moved out from pinctrl common to s900 specific. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-15 15:47:45 +03:00
#include <linux/pinctrl/pinconf-generic.h>
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
#include "pinctrl-owl.h"
/* Pinctrl registers offset */
#define MFCTL0 (0x0040)
#define MFCTL1 (0x0044)
#define MFCTL2 (0x0048)
#define MFCTL3 (0x004C)
#define PAD_PULLCTL0 (0x0060)
#define PAD_PULLCTL1 (0x0064)
#define PAD_PULLCTL2 (0x0068)
#define PAD_ST0 (0x006C)
#define PAD_ST1 (0x0070)
#define PAD_CTL (0x0074)
#define PAD_DRV0 (0x0080)
#define PAD_DRV1 (0x0084)
#define PAD_DRV2 (0x0088)
#define PAD_SR0 (0x0270)
#define PAD_SR1 (0x0274)
#define PAD_SR2 (0x0278)
#define _GPIOA(offset) (offset)
#define _GPIOB(offset) (32 + (offset))
#define _GPIOC(offset) (64 + (offset))
#define _GPIOD(offset) (76 + (offset))
#define _GPIOE(offset) (106 + (offset))
#define _GPIOF(offset) (138 + (offset))
#define NUM_GPIOS (_GPIOF(7) + 1)
#define _PIN(offset) (NUM_GPIOS + (offset))
#define ETH_TXD0 _GPIOA(0)
#define ETH_TXD1 _GPIOA(1)
#define ETH_TXEN _GPIOA(2)
#define ETH_RXER _GPIOA(3)
#define ETH_CRS_DV _GPIOA(4)
#define ETH_RXD1 _GPIOA(5)
#define ETH_RXD0 _GPIOA(6)
#define ETH_REF_CLK _GPIOA(7)
#define ETH_MDC _GPIOA(8)
#define ETH_MDIO _GPIOA(9)
#define SIRQ0 _GPIOA(10)
#define SIRQ1 _GPIOA(11)
#define SIRQ2 _GPIOA(12)
#define I2S_D0 _GPIOA(13)
#define I2S_BCLK0 _GPIOA(14)
#define I2S_LRCLK0 _GPIOA(15)
#define I2S_MCLK0 _GPIOA(16)
#define I2S_D1 _GPIOA(17)
#define I2S_BCLK1 _GPIOA(18)
#define I2S_LRCLK1 _GPIOA(19)
#define I2S_MCLK1 _GPIOA(20)
#define ERAM_A5 _GPIOA(21)
#define ERAM_A6 _GPIOA(22)
#define ERAM_A7 _GPIOA(23)
#define ERAM_A8 _GPIOA(24)
#define ERAM_A9 _GPIOA(25)
#define ERAM_A10 _GPIOA(26)
#define ERAM_A11 _GPIOA(27)
#define SD0_D0 _GPIOA(28)
#define SD0_D1 _GPIOA(29)
#define SD0_D2 _GPIOA(30)
#define SD0_D3 _GPIOA(31)
#define SD1_D0 _GPIOB(0)
#define SD1_D1 _GPIOB(1)
#define SD1_D2 _GPIOB(2)
#define SD1_D3 _GPIOB(3)
#define SD0_CMD _GPIOB(4)
#define SD0_CLK _GPIOB(5)
#define SD1_CMD _GPIOB(6)
#define SD1_CLK _GPIOB(7)
#define SPI0_SCLK _GPIOB(8)
#define SPI0_SS _GPIOB(9)
#define SPI0_MISO _GPIOB(10)
#define SPI0_MOSI _GPIOB(11)
#define UART0_RX _GPIOB(12)
#define UART0_TX _GPIOB(13)
#define UART2_RX _GPIOB(14)
#define UART2_TX _GPIOB(15)
#define UART2_RTSB _GPIOB(16)
#define UART2_CTSB _GPIOB(17)
#define UART4_RX _GPIOB(18)
#define UART4_TX _GPIOB(19)
#define I2C0_SCLK _GPIOB(20)
#define I2C0_SDATA _GPIOB(21)
#define I2C1_SCLK _GPIOB(22)
#define I2C1_SDATA _GPIOB(23)
#define I2C2_SCLK _GPIOB(24)
#define I2C2_SDATA _GPIOB(25)
#define CSI0_DN0 _GPIOB(26)
#define CSI0_DP0 _GPIOB(27)
#define CSI0_DN1 _GPIOB(28)
#define CSI0_DP1 _GPIOB(29)
#define CSI0_CN _GPIOB(30)
#define CSI0_CP _GPIOB(31)
#define CSI0_DN2 _GPIOC(0)
#define CSI0_DP2 _GPIOC(1)
#define CSI0_DN3 _GPIOC(2)
#define CSI0_DP3 _GPIOC(3)
#define SENSOR0_PCLK _GPIOC(4)
#define CSI1_DN0 _GPIOC(5)
#define CSI1_DP0 _GPIOC(6)
#define CSI1_DN1 _GPIOC(7)
#define CSI1_DP1 _GPIOC(8)
#define CSI1_CN _GPIOC(9)
#define CSI1_CP _GPIOC(10)
#define SENSOR0_CKOUT _GPIOC(11)
#define LVDS_OEP _GPIOD(0)
#define LVDS_OEN _GPIOD(1)
#define LVDS_ODP _GPIOD(2)
#define LVDS_ODN _GPIOD(3)
#define LVDS_OCP _GPIOD(4)
#define LVDS_OCN _GPIOD(5)
#define LVDS_OBP _GPIOD(6)
#define LVDS_OBN _GPIOD(7)
#define LVDS_OAP _GPIOD(8)
#define LVDS_OAN _GPIOD(9)
#define LVDS_EEP _GPIOD(10)
#define LVDS_EEN _GPIOD(11)
#define LVDS_EDP _GPIOD(12)
#define LVDS_EDN _GPIOD(13)
#define LVDS_ECP _GPIOD(14)
#define LVDS_ECN _GPIOD(15)
#define LVDS_EBP _GPIOD(16)
#define LVDS_EBN _GPIOD(17)
#define LVDS_EAP _GPIOD(18)
#define LVDS_EAN _GPIOD(19)
#define DSI_DP3 _GPIOD(20)
#define DSI_DN3 _GPIOD(21)
#define DSI_DP1 _GPIOD(22)
#define DSI_DN1 _GPIOD(23)
#define DSI_CP _GPIOD(24)
#define DSI_CN _GPIOD(25)
#define DSI_DP0 _GPIOD(26)
#define DSI_DN0 _GPIOD(27)
#define DSI_DP2 _GPIOD(28)
#define DSI_DN2 _GPIOD(29)
#define NAND0_D0 _GPIOE(0)
#define NAND0_D1 _GPIOE(1)
#define NAND0_D2 _GPIOE(2)
#define NAND0_D3 _GPIOE(3)
#define NAND0_D4 _GPIOE(4)
#define NAND0_D5 _GPIOE(5)
#define NAND0_D6 _GPIOE(6)
#define NAND0_D7 _GPIOE(7)
#define NAND0_DQS _GPIOE(8)
#define NAND0_DQSN _GPIOE(9)
#define NAND0_ALE _GPIOE(10)
#define NAND0_CLE _GPIOE(11)
#define NAND0_CEB0 _GPIOE(12)
#define NAND0_CEB1 _GPIOE(13)
#define NAND0_CEB2 _GPIOE(14)
#define NAND0_CEB3 _GPIOE(15)
#define NAND1_D0 _GPIOE(16)
#define NAND1_D1 _GPIOE(17)
#define NAND1_D2 _GPIOE(18)
#define NAND1_D3 _GPIOE(19)
#define NAND1_D4 _GPIOE(20)
#define NAND1_D5 _GPIOE(21)
#define NAND1_D6 _GPIOE(22)
#define NAND1_D7 _GPIOE(23)
#define NAND1_DQS _GPIOE(24)
#define NAND1_DQSN _GPIOE(25)
#define NAND1_ALE _GPIOE(26)
#define NAND1_CLE _GPIOE(27)
#define NAND1_CEB0 _GPIOE(28)
#define NAND1_CEB1 _GPIOE(29)
#define NAND1_CEB2 _GPIOE(30)
#define NAND1_CEB3 _GPIOE(31)
#define PCM1_IN _GPIOF(0)
#define PCM1_CLK _GPIOF(1)
#define PCM1_SYNC _GPIOF(2)
#define PCM1_OUT _GPIOF(3)
#define UART3_RX _GPIOF(4)
#define UART3_TX _GPIOF(5)
#define UART3_RTSB _GPIOF(6)
#define UART3_CTSB _GPIOF(7)
/* System */
#define SGPIO0 _PIN(0)
#define SGPIO1 _PIN(1)
#define SGPIO2 _PIN(2)
#define SGPIO3 _PIN(3)
#define NUM_PADS (_PIN(3) + 1)
/* Pad names as specified in datasheet */
pinctrl: actions: make s900_functions, s900_padinfo and s900_pads static s900_functions, s900_padinfo and s900_pads are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: drivers/pinctrl/actions/pinctrl-s900.c:1445:30: warning: symbol 's900_functions' was not declared. Should it be static? drivers/pinctrl/actions/pinctrl-s900.c:1664:20: warning: symbol 's900_padinfo' was not declared. Should it be static? drivers/pinctrl/actions/pinctrl-s900.c:207:31: warning: symbol 's900_pads' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-30 16:04:34 +03:00
static const struct pinctrl_pin_desc s900_pads[] = {
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
PINCTRL_PIN(ETH_TXD0, "eth_txd0"),
PINCTRL_PIN(ETH_TXD1, "eth_txd1"),
PINCTRL_PIN(ETH_TXEN, "eth_txen"),
PINCTRL_PIN(ETH_RXER, "eth_rxer"),
PINCTRL_PIN(ETH_CRS_DV, "eth_crs_dv"),
PINCTRL_PIN(ETH_RXD1, "eth_rxd1"),
PINCTRL_PIN(ETH_RXD0, "eth_rxd0"),
PINCTRL_PIN(ETH_REF_CLK, "eth_ref_clk"),
PINCTRL_PIN(ETH_MDC, "eth_mdc"),
PINCTRL_PIN(ETH_MDIO, "eth_mdio"),
PINCTRL_PIN(SIRQ0, "sirq0"),
PINCTRL_PIN(SIRQ1, "sirq1"),
PINCTRL_PIN(SIRQ2, "sirq2"),
PINCTRL_PIN(I2S_D0, "i2s_d0"),
PINCTRL_PIN(I2S_BCLK0, "i2s_bclk0"),
PINCTRL_PIN(I2S_LRCLK0, "i2s_lrclk0"),
PINCTRL_PIN(I2S_MCLK0, "i2s_mclk0"),
PINCTRL_PIN(I2S_D1, "i2s_d1"),
PINCTRL_PIN(I2S_BCLK1, "i2s_bclk1"),
PINCTRL_PIN(I2S_LRCLK1, "i2s_lrclk1"),
PINCTRL_PIN(I2S_MCLK1, "i2s_mclk1"),
PINCTRL_PIN(PCM1_IN, "pcm1_in"),
PINCTRL_PIN(PCM1_CLK, "pcm1_clk"),
PINCTRL_PIN(PCM1_SYNC, "pcm1_sync"),
PINCTRL_PIN(PCM1_OUT, "pcm1_out"),
PINCTRL_PIN(ERAM_A5, "eram_a5"),
PINCTRL_PIN(ERAM_A6, "eram_a6"),
PINCTRL_PIN(ERAM_A7, "eram_a7"),
PINCTRL_PIN(ERAM_A8, "eram_a8"),
PINCTRL_PIN(ERAM_A9, "eram_a9"),
PINCTRL_PIN(ERAM_A10, "eram_a10"),
PINCTRL_PIN(ERAM_A11, "eram_a11"),
PINCTRL_PIN(LVDS_OEP, "lvds_oep"),
PINCTRL_PIN(LVDS_OEN, "lvds_oen"),
PINCTRL_PIN(LVDS_ODP, "lvds_odp"),
PINCTRL_PIN(LVDS_ODN, "lvds_odn"),
PINCTRL_PIN(LVDS_OCP, "lvds_ocp"),
PINCTRL_PIN(LVDS_OCN, "lvds_ocn"),
PINCTRL_PIN(LVDS_OBP, "lvds_obp"),
PINCTRL_PIN(LVDS_OBN, "lvds_obn"),
PINCTRL_PIN(LVDS_OAP, "lvds_oap"),
PINCTRL_PIN(LVDS_OAN, "lvds_oan"),
PINCTRL_PIN(LVDS_EEP, "lvds_eep"),
PINCTRL_PIN(LVDS_EEN, "lvds_een"),
PINCTRL_PIN(LVDS_EDP, "lvds_edp"),
PINCTRL_PIN(LVDS_EDN, "lvds_edn"),
PINCTRL_PIN(LVDS_ECP, "lvds_ecp"),
PINCTRL_PIN(LVDS_ECN, "lvds_ecn"),
PINCTRL_PIN(LVDS_EBP, "lvds_ebp"),
PINCTRL_PIN(LVDS_EBN, "lvds_ebn"),
PINCTRL_PIN(LVDS_EAP, "lvds_eap"),
PINCTRL_PIN(LVDS_EAN, "lvds_ean"),
PINCTRL_PIN(SD0_D0, "sd0_d0"),
PINCTRL_PIN(SD0_D1, "sd0_d1"),
PINCTRL_PIN(SD0_D2, "sd0_d2"),
PINCTRL_PIN(SD0_D3, "sd0_d3"),
PINCTRL_PIN(SD1_D0, "sd1_d0"),
PINCTRL_PIN(SD1_D1, "sd1_d1"),
PINCTRL_PIN(SD1_D2, "sd1_d2"),
PINCTRL_PIN(SD1_D3, "sd1_d3"),
PINCTRL_PIN(SD0_CMD, "sd0_cmd"),
PINCTRL_PIN(SD0_CLK, "sd0_clk"),
PINCTRL_PIN(SD1_CMD, "sd1_cmd"),
PINCTRL_PIN(SD1_CLK, "sd1_clk"),
PINCTRL_PIN(SPI0_SCLK, "spi0_sclk"),
PINCTRL_PIN(SPI0_SS, "spi0_ss"),
PINCTRL_PIN(SPI0_MISO, "spi0_miso"),
PINCTRL_PIN(SPI0_MOSI, "spi0_mosi"),
PINCTRL_PIN(UART0_RX, "uart0_rx"),
PINCTRL_PIN(UART0_TX, "uart0_tx"),
PINCTRL_PIN(UART2_RX, "uart2_rx"),
PINCTRL_PIN(UART2_TX, "uart2_tx"),
PINCTRL_PIN(UART2_RTSB, "uart2_rtsb"),
PINCTRL_PIN(UART2_CTSB, "uart2_ctsb"),
PINCTRL_PIN(UART3_RX, "uart3_rx"),
PINCTRL_PIN(UART3_TX, "uart3_tx"),
PINCTRL_PIN(UART3_RTSB, "uart3_rtsb"),
PINCTRL_PIN(UART3_CTSB, "uart3_ctsb"),
PINCTRL_PIN(UART4_RX, "uart4_rx"),
PINCTRL_PIN(UART4_TX, "uart4_tx"),
PINCTRL_PIN(I2C0_SCLK, "i2c0_sclk"),
PINCTRL_PIN(I2C0_SDATA, "i2c0_sdata"),
PINCTRL_PIN(I2C1_SCLK, "i2c1_sclk"),
PINCTRL_PIN(I2C1_SDATA, "i2c1_sdata"),
PINCTRL_PIN(I2C2_SCLK, "i2c2_sclk"),
PINCTRL_PIN(I2C2_SDATA, "i2c2_sdata"),
PINCTRL_PIN(CSI0_DN0, "csi0_dn0"),
PINCTRL_PIN(CSI0_DP0, "csi0_dp0"),
PINCTRL_PIN(CSI0_DN1, "csi0_dn1"),
PINCTRL_PIN(CSI0_DP1, "csi0_dp1"),
PINCTRL_PIN(CSI0_CN, "csi0_cn"),
PINCTRL_PIN(CSI0_CP, "csi0_cp"),
PINCTRL_PIN(CSI0_DN2, "csi0_dn2"),
PINCTRL_PIN(CSI0_DP2, "csi0_dp2"),
PINCTRL_PIN(CSI0_DN3, "csi0_dn3"),
PINCTRL_PIN(CSI0_DP3, "csi0_dp3"),
PINCTRL_PIN(DSI_DP3, "dsi_dp3"),
PINCTRL_PIN(DSI_DN3, "dsi_dn3"),
PINCTRL_PIN(DSI_DP1, "dsi_dp1"),
PINCTRL_PIN(DSI_DN1, "dsi_dn1"),
PINCTRL_PIN(DSI_CP, "dsi_cp"),
PINCTRL_PIN(DSI_CN, "dsi_cn"),
PINCTRL_PIN(DSI_DP0, "dsi_dp0"),
PINCTRL_PIN(DSI_DN0, "dsi_dn0"),
PINCTRL_PIN(DSI_DP2, "dsi_dp2"),
PINCTRL_PIN(DSI_DN2, "dsi_dn2"),
PINCTRL_PIN(SENSOR0_PCLK, "sensor0_pclk"),
PINCTRL_PIN(CSI1_DN0, "csi1_dn0"),
PINCTRL_PIN(CSI1_DP0, "csi1_dp0"),
PINCTRL_PIN(CSI1_DN1, "csi1_dn1"),
PINCTRL_PIN(CSI1_DP1, "csi1_dp1"),
PINCTRL_PIN(CSI1_CN, "csi1_cn"),
PINCTRL_PIN(CSI1_CP, "csi1_cp"),
PINCTRL_PIN(SENSOR0_CKOUT, "sensor0_ckout"),
PINCTRL_PIN(NAND0_D0, "nand0_d0"),
PINCTRL_PIN(NAND0_D1, "nand0_d1"),
PINCTRL_PIN(NAND0_D2, "nand0_d2"),
PINCTRL_PIN(NAND0_D3, "nand0_d3"),
PINCTRL_PIN(NAND0_D4, "nand0_d4"),
PINCTRL_PIN(NAND0_D5, "nand0_d5"),
PINCTRL_PIN(NAND0_D6, "nand0_d6"),
PINCTRL_PIN(NAND0_D7, "nand0_d7"),
PINCTRL_PIN(NAND0_DQS, "nand0_dqs"),
PINCTRL_PIN(NAND0_DQSN, "nand0_dqsn"),
PINCTRL_PIN(NAND0_ALE, "nand0_ale"),
PINCTRL_PIN(NAND0_CLE, "nand0_cle"),
PINCTRL_PIN(NAND0_CEB0, "nand0_ceb0"),
PINCTRL_PIN(NAND0_CEB1, "nand0_ceb1"),
PINCTRL_PIN(NAND0_CEB2, "nand0_ceb2"),
PINCTRL_PIN(NAND0_CEB3, "nand0_ceb3"),
PINCTRL_PIN(NAND1_D0, "nand1_d0"),
PINCTRL_PIN(NAND1_D1, "nand1_d1"),
PINCTRL_PIN(NAND1_D2, "nand1_d2"),
PINCTRL_PIN(NAND1_D3, "nand1_d3"),
PINCTRL_PIN(NAND1_D4, "nand1_d4"),
PINCTRL_PIN(NAND1_D5, "nand1_d5"),
PINCTRL_PIN(NAND1_D6, "nand1_d6"),
PINCTRL_PIN(NAND1_D7, "nand1_d7"),
PINCTRL_PIN(NAND1_DQS, "nand1_dqs"),
PINCTRL_PIN(NAND1_DQSN, "nand1_dqsn"),
PINCTRL_PIN(NAND1_ALE, "nand1_ale"),
PINCTRL_PIN(NAND1_CLE, "nand1_cle"),
PINCTRL_PIN(NAND1_CEB0, "nand1_ceb0"),
PINCTRL_PIN(NAND1_CEB1, "nand1_ceb1"),
PINCTRL_PIN(NAND1_CEB2, "nand1_ceb2"),
PINCTRL_PIN(NAND1_CEB3, "nand1_ceb3"),
PINCTRL_PIN(SGPIO0, "sgpio0"),
PINCTRL_PIN(SGPIO1, "sgpio1"),
PINCTRL_PIN(SGPIO2, "sgpio2"),
PINCTRL_PIN(SGPIO3, "sgpio3")
};
enum s900_pinmux_functions {
S900_MUX_ERAM,
S900_MUX_ETH_RMII,
S900_MUX_ETH_SMII,
S900_MUX_SPI0,
S900_MUX_SPI1,
S900_MUX_SPI2,
S900_MUX_SPI3,
S900_MUX_SENS0,
S900_MUX_UART0,
S900_MUX_UART1,
S900_MUX_UART2,
S900_MUX_UART3,
S900_MUX_UART4,
S900_MUX_UART5,
S900_MUX_UART6,
S900_MUX_I2S0,
S900_MUX_I2S1,
S900_MUX_PCM0,
S900_MUX_PCM1,
S900_MUX_JTAG,
S900_MUX_PWM0,
S900_MUX_PWM1,
S900_MUX_PWM2,
S900_MUX_PWM3,
S900_MUX_PWM4,
S900_MUX_PWM5,
S900_MUX_SD0,
S900_MUX_SD1,
S900_MUX_SD2,
S900_MUX_SD3,
S900_MUX_I2C0,
S900_MUX_I2C1,
S900_MUX_I2C2,
S900_MUX_I2C3,
S900_MUX_I2C4,
S900_MUX_I2C5,
S900_MUX_LVDS,
S900_MUX_USB20,
S900_MUX_USB30,
S900_MUX_GPU,
S900_MUX_MIPI_CSI0,
S900_MUX_MIPI_CSI1,
S900_MUX_MIPI_DSI,
S900_MUX_NAND0,
S900_MUX_NAND1,
S900_MUX_SPDIF,
S900_MUX_SIRQ0,
S900_MUX_SIRQ1,
S900_MUX_SIRQ2,
S900_MUX_AUX_START,
S900_MUX_MAX,
S900_MUX_RESERVED
};
/* mfp0_22 */
static unsigned int lvds_oxx_uart4_mfp_pads[] = { LVDS_OAP, LVDS_OAN };
static unsigned int lvds_oxx_uart4_mfp_funcs[] = { S900_MUX_ERAM,
S900_MUX_UART4 };
/* mfp0_21_20 */
static unsigned int rmii_mdc_mfp_pads[] = { ETH_MDC };
static unsigned int rmii_mdc_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_PWM2,
S900_MUX_UART2,
S900_MUX_RESERVED };
static unsigned int rmii_mdio_mfp_pads[] = { ETH_MDIO };
static unsigned int rmii_mdio_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_PWM3,
S900_MUX_UART2,
S900_MUX_RESERVED };
/* mfp0_19 */
static unsigned int sirq0_mfp_pads[] = { SIRQ0 };
static unsigned int sirq0_mfp_funcs[] = { S900_MUX_SIRQ0,
S900_MUX_PWM0 };
static unsigned int sirq1_mfp_pads[] = { SIRQ1 };
static unsigned int sirq1_mfp_funcs[] = { S900_MUX_SIRQ1,
S900_MUX_PWM1 };
/* mfp0_18_16 */
static unsigned int rmii_txd0_mfp_pads[] = { ETH_TXD0 };
static unsigned int rmii_txd0_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_ETH_SMII,
S900_MUX_SPI2,
S900_MUX_UART6,
S900_MUX_SENS0,
S900_MUX_PWM0 };
static unsigned int rmii_txd1_mfp_pads[] = { ETH_TXD1 };
static unsigned int rmii_txd1_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_ETH_SMII,
S900_MUX_SPI2,
S900_MUX_UART6,
S900_MUX_SENS0,
S900_MUX_PWM1 };
/* mfp0_15_13 */
static unsigned int rmii_txen_mfp_pads[] = { ETH_TXEN };
static unsigned int rmii_txen_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_UART2,
S900_MUX_SPI3,
S900_MUX_RESERVED,
S900_MUX_RESERVED,
S900_MUX_PWM2,
S900_MUX_SENS0 };
static unsigned int rmii_rxer_mfp_pads[] = { ETH_RXER };
static unsigned int rmii_rxer_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_UART2,
S900_MUX_SPI3,
S900_MUX_RESERVED,
S900_MUX_RESERVED,
S900_MUX_PWM3,
S900_MUX_SENS0 };
/* mfp0_12_11 */
static unsigned int rmii_crs_dv_mfp_pads[] = { ETH_CRS_DV };
static unsigned int rmii_crs_dv_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_ETH_SMII,
S900_MUX_SPI2,
S900_MUX_UART4 };
/* mfp0_10_8 */
static unsigned int rmii_rxd1_mfp_pads[] = { ETH_RXD1 };
static unsigned int rmii_rxd1_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_UART2,
S900_MUX_SPI3,
S900_MUX_RESERVED,
S900_MUX_UART5,
S900_MUX_PWM0,
S900_MUX_SENS0 };
static unsigned int rmii_rxd0_mfp_pads[] = { ETH_RXD0 };
static unsigned int rmii_rxd0_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_UART2,
S900_MUX_SPI3,
S900_MUX_RESERVED,
S900_MUX_UART5,
S900_MUX_PWM1,
S900_MUX_SENS0 };
/* mfp0_7_6 */
static unsigned int rmii_ref_clk_mfp_pads[] = { ETH_REF_CLK };
static unsigned int rmii_ref_clk_mfp_funcs[] = { S900_MUX_ETH_RMII,
S900_MUX_UART4,
S900_MUX_SPI2,
S900_MUX_RESERVED };
/* mfp0_5 */
static unsigned int i2s_d0_mfp_pads[] = { I2S_D0 };
static unsigned int i2s_d0_mfp_funcs[] = { S900_MUX_I2S0,
S900_MUX_PCM0 };
static unsigned int i2s_d1_mfp_pads[] = { I2S_D1 };
static unsigned int i2s_d1_mfp_funcs[] = { S900_MUX_I2S1,
S900_MUX_PCM0 };
/* mfp0_4_3 */
static unsigned int i2s_lr_m_clk0_mfp_pads[] = { I2S_LRCLK0,
I2S_MCLK0 };
static unsigned int i2s_lr_m_clk0_mfp_funcs[] = { S900_MUX_I2S0,
S900_MUX_PCM0,
S900_MUX_PCM1,
S900_MUX_RESERVED };
/* mfp0_2 */
static unsigned int i2s_bclk0_mfp_pads[] = { I2S_BCLK0 };
static unsigned int i2s_bclk0_mfp_funcs[] = { S900_MUX_I2S0,
S900_MUX_PCM0 };
static unsigned int i2s_bclk1_mclk1_mfp_pads[] = { I2S_BCLK1,
I2S_LRCLK1,
I2S_MCLK1 };
static unsigned int i2s_bclk1_mclk1_mfp_funcs[] = { S900_MUX_I2S1,
S900_MUX_PCM0 };
/* mfp0_1_0 */
static unsigned int pcm1_in_out_mfp_pads[] = { PCM1_IN,
PCM1_OUT };
static unsigned int pcm1_in_out_mfp_funcs[] = { S900_MUX_PCM1,
S900_MUX_SPI1,
S900_MUX_I2C3,
S900_MUX_UART4 };
static unsigned int pcm1_clk_mfp_pads[] = { PCM1_CLK };
static unsigned int pcm1_clk_mfp_funcs[] = { S900_MUX_PCM1,
S900_MUX_SPI1,
S900_MUX_PWM4,
S900_MUX_UART4 };
static unsigned int pcm1_sync_mfp_pads[] = { PCM1_SYNC };
static unsigned int pcm1_sync_mfp_funcs[] = { S900_MUX_PCM1,
S900_MUX_SPI1,
S900_MUX_PWM5,
S900_MUX_UART4 };
/* mfp1_31_29 */
static unsigned int eram_a5_mfp_pads[] = { ERAM_A5 };
static unsigned int eram_a5_mfp_funcs[] = { S900_MUX_UART4,
S900_MUX_JTAG,
S900_MUX_ERAM,
S900_MUX_PWM0,
S900_MUX_RESERVED,
S900_MUX_SENS0 };
static unsigned int eram_a6_mfp_pads[] = { ERAM_A6 };
static unsigned int eram_a6_mfp_funcs[] = { S900_MUX_UART4,
S900_MUX_JTAG,
S900_MUX_ERAM,
S900_MUX_PWM1,
S900_MUX_RESERVED,
S900_MUX_SENS0,
};
static unsigned int eram_a7_mfp_pads[] = { ERAM_A7 };
static unsigned int eram_a7_mfp_funcs[] = { S900_MUX_RESERVED,
S900_MUX_JTAG,
S900_MUX_ERAM,
S900_MUX_RESERVED,
S900_MUX_RESERVED,
S900_MUX_SENS0 };
/* mfp1_28_26 */
static unsigned int eram_a8_mfp_pads[] = { ERAM_A8 };
static unsigned int eram_a8_mfp_funcs[] = { S900_MUX_RESERVED,
S900_MUX_JTAG,
S900_MUX_ERAM,
S900_MUX_PWM1,
S900_MUX_RESERVED,
S900_MUX_SENS0 };
static unsigned int eram_a9_mfp_pads[] = { ERAM_A9 };
static unsigned int eram_a9_mfp_funcs[] = { S900_MUX_USB20,
S900_MUX_UART5,
S900_MUX_ERAM,
S900_MUX_PWM2,
S900_MUX_RESERVED,
S900_MUX_SENS0 };
static unsigned int eram_a10_mfp_pads[] = { ERAM_A10 };
static unsigned int eram_a10_mfp_funcs[] = { S900_MUX_USB30,
S900_MUX_JTAG,
S900_MUX_ERAM,
S900_MUX_PWM3,
S900_MUX_RESERVED,
S900_MUX_SENS0,
S900_MUX_RESERVED,
S900_MUX_RESERVED };
/* mfp1_25_23 */
static unsigned int eram_a11_mfp_pads[] = { ERAM_A11 };
static unsigned int eram_a11_mfp_funcs[] = { S900_MUX_RESERVED,
S900_MUX_RESERVED,
S900_MUX_ERAM,
S900_MUX_PWM2,
S900_MUX_UART5,
S900_MUX_RESERVED,
S900_MUX_SENS0,
S900_MUX_RESERVED };
/* mfp1_22 */
static unsigned int lvds_oep_odn_mfp_pads[] = { LVDS_OEP,
LVDS_OEN,
LVDS_ODP,
LVDS_ODN };
static unsigned int lvds_oep_odn_mfp_funcs[] = { S900_MUX_LVDS,
S900_MUX_UART2 };
static unsigned int lvds_ocp_obn_mfp_pads[] = { LVDS_OCP,
LVDS_OCN,
LVDS_OBP,
LVDS_OBN };
static unsigned int lvds_ocp_obn_mfp_funcs[] = { S900_MUX_LVDS,
S900_MUX_PCM1 };
static unsigned int lvds_oap_oan_mfp_pads[] = { LVDS_OAP,
LVDS_OAN };
static unsigned int lvds_oap_oan_mfp_funcs[] = { S900_MUX_LVDS,
S900_MUX_ERAM };
/* mfp1_21 */
static unsigned int lvds_e_mfp_pads[] = { LVDS_EEP,
LVDS_EEN,
LVDS_EDP,
LVDS_EDN,
LVDS_ECP,
LVDS_ECN,
LVDS_EBP,
LVDS_EBN,
LVDS_EAP,
LVDS_EAN };
static unsigned int lvds_e_mfp_funcs[] = { S900_MUX_LVDS,
S900_MUX_ERAM };
/* mfp1_5_4 */
static unsigned int spi0_sclk_mosi_mfp_pads[] = { SPI0_SCLK,
SPI0_MOSI };
static unsigned int spi0_sclk_mosi_mfp_funcs[] = { S900_MUX_SPI0,
S900_MUX_ERAM,
S900_MUX_I2C3,
S900_MUX_PCM0 };
/* mfp1_3_1 */
static unsigned int spi0_ss_mfp_pads[] = { SPI0_SS };
static unsigned int spi0_ss_mfp_funcs[] = { S900_MUX_SPI0,
S900_MUX_ERAM,
S900_MUX_I2S1,
S900_MUX_PCM1,
S900_MUX_PCM0,
S900_MUX_PWM4 };
static unsigned int spi0_miso_mfp_pads[] = { SPI0_MISO };
static unsigned int spi0_miso_mfp_funcs[] = { S900_MUX_SPI0,
S900_MUX_ERAM,
S900_MUX_I2S1,
S900_MUX_PCM1,
S900_MUX_PCM0,
S900_MUX_PWM5 };
/* mfp2_23 */
static unsigned int uart2_rtsb_mfp_pads[] = { UART2_RTSB };
static unsigned int uart2_rtsb_mfp_funcs[] = { S900_MUX_UART2,
S900_MUX_UART0 };
/* mfp2_22 */
static unsigned int uart2_ctsb_mfp_pads[] = { UART2_CTSB };
static unsigned int uart2_ctsb_mfp_funcs[] = { S900_MUX_UART2,
S900_MUX_UART0 };
/* mfp2_21 */
static unsigned int uart3_rtsb_mfp_pads[] = { UART3_RTSB };
static unsigned int uart3_rtsb_mfp_funcs[] = { S900_MUX_UART3,
S900_MUX_UART5 };
/* mfp2_20 */
static unsigned int uart3_ctsb_mfp_pads[] = { UART3_CTSB };
static unsigned int uart3_ctsb_mfp_funcs[] = { S900_MUX_UART3,
S900_MUX_UART5 };
/* mfp2_19_17 */
static unsigned int sd0_d0_mfp_pads[] = { SD0_D0 };
static unsigned int sd0_d0_mfp_funcs[] = { S900_MUX_SD0,
S900_MUX_ERAM,
S900_MUX_RESERVED,
S900_MUX_JTAG,
S900_MUX_UART2,
S900_MUX_UART5,
S900_MUX_GPU };
/* mfp2_16_14 */
static unsigned int sd0_d1_mfp_pads[] = { SD0_D1 };
static unsigned int sd0_d1_mfp_funcs[] = { S900_MUX_SD0,
S900_MUX_ERAM,
S900_MUX_GPU,
S900_MUX_RESERVED,
S900_MUX_UART2,
S900_MUX_UART5 };
/* mfp_13_11 */
static unsigned int sd0_d2_d3_mfp_pads[] = { SD0_D2,
SD0_D3 };
static unsigned int sd0_d2_d3_mfp_funcs[] = { S900_MUX_SD0,
S900_MUX_ERAM,
S900_MUX_RESERVED,
S900_MUX_JTAG,
S900_MUX_UART2,
S900_MUX_UART1,
S900_MUX_GPU };
/* mfp2_10_9 */
static unsigned int sd1_d0_d3_mfp_pads[] = { SD1_D0, SD1_D1,
SD1_D2, SD1_D3 };
static unsigned int sd1_d0_d3_mfp_funcs[] = { S900_MUX_SD1,
S900_MUX_ERAM };
/* mfp2_8_7 */
static unsigned int sd0_cmd_mfp_pads[] = { SD0_CMD };
static unsigned int sd0_cmd_mfp_funcs[] = { S900_MUX_SD0,
S900_MUX_ERAM,
S900_MUX_GPU,
S900_MUX_JTAG };
/* mfp2_6_5 */
static unsigned int sd0_clk_mfp_pads[] = { SD0_CLK };
static unsigned int sd0_clk_mfp_funcs[] = { S900_MUX_SD0,
S900_MUX_ERAM,
S900_MUX_JTAG,
S900_MUX_GPU };
/* mfp2_4_3 */
static unsigned int sd1_cmd_clk_mfp_pads[] = { SD1_CMD, SD1_CLK };
static unsigned int sd1_cmd_clk_mfp_funcs[] = { S900_MUX_SD1,
S900_MUX_ERAM };
/* mfp2_2_0 */
static unsigned int uart0_rx_mfp_pads[] = { UART0_RX };
static unsigned int uart0_rx_mfp_funcs[] = { S900_MUX_UART0,
S900_MUX_UART2,
S900_MUX_SPI1,
S900_MUX_I2C5,
S900_MUX_PCM1,
S900_MUX_I2S1 };
/* mfp3_27 */
static unsigned int nand0_d0_ceb3_mfp_pads[] = { NAND0_D0, NAND0_D1,
NAND0_D2, NAND0_D3,
NAND0_D4, NAND0_D5,
NAND0_D6, NAND0_D7,
NAND0_DQSN, NAND0_CEB3 };
static unsigned int nand0_d0_ceb3_mfp_funcs[] = { S900_MUX_NAND0,
S900_MUX_SD2 };
/* mfp3_21_19 */
static unsigned int uart0_tx_mfp_pads[] = { UART0_TX };
static unsigned int uart0_tx_mfp_funcs[] = { S900_MUX_UART0,
S900_MUX_UART2,
S900_MUX_SPI1,
S900_MUX_I2C5,
S900_MUX_SPDIF,
S900_MUX_PCM1,
S900_MUX_I2S1 };
/* mfp3_18_16 */
static unsigned int i2c0_mfp_pads[] = { I2C0_SCLK, I2C0_SDATA };
static unsigned int i2c0_mfp_funcs[] = { S900_MUX_I2C0,
S900_MUX_UART2,
S900_MUX_I2C1,
S900_MUX_UART1,
S900_MUX_SPI1 };
/* mfp3_15 */
static unsigned int csi0_cn_cp_mfp_pads[] = { CSI0_CN, CSI0_CP };
static unsigned int csi0_cn_cp_mfp_funcs[] = { S900_MUX_SENS0,
S900_MUX_SENS0 };
/* mfp3_14 */
static unsigned int csi0_dn0_dp3_mfp_pads[] = { CSI0_DN0, CSI0_DP0,
CSI0_DN1, CSI0_DP1,
CSI0_CN, CSI0_CP,
CSI0_DP2, CSI0_DN2,
CSI0_DN3, CSI0_DP3 };
static unsigned int csi0_dn0_dp3_mfp_funcs[] = { S900_MUX_MIPI_CSI0,
S900_MUX_SENS0 };
/* mfp3_13 */
static unsigned int csi1_dn0_cp_mfp_pads[] = { CSI1_DN0, CSI1_DP0,
CSI1_DN1, CSI1_DP1,
CSI1_CN, CSI1_CP };
static unsigned int csi1_dn0_cp_mfp_funcs[] = { S900_MUX_MIPI_CSI1,
S900_MUX_SENS0 };
/* mfp3_12_dsi */
static unsigned int dsi_dp3_dn1_mfp_pads[] = { DSI_DP3, DSI_DN2,
DSI_DP1, DSI_DN1 };
static unsigned int dsi_dp3_dn1_mfp_funcs[] = { S900_MUX_MIPI_DSI,
S900_MUX_UART2 };
static unsigned int dsi_cp_dn0_mfp_pads[] = { DSI_CP, DSI_CN,
DSI_DP0, DSI_DN0 };
static unsigned int dsi_cp_dn0_mfp_funcs[] = { S900_MUX_MIPI_DSI,
S900_MUX_PCM1 };
static unsigned int dsi_dp2_dn2_mfp_pads[] = { DSI_DP2, DSI_DN2 };
static unsigned int dsi_dp2_dn2_mfp_funcs[] = { S900_MUX_MIPI_DSI,
S900_MUX_UART4 };
/* mfp3_11 */
static unsigned int nand1_d0_ceb1_mfp_pads[] = { NAND1_D0, NAND1_D1,
NAND1_D2, NAND1_D3,
NAND1_D4, NAND1_D5,
NAND1_D6, NAND1_D7,
NAND1_DQSN, NAND1_CEB1 };
static unsigned int nand1_d0_ceb1_mfp_funcs[] = { S900_MUX_NAND1,
S900_MUX_SD3 };
/* mfp3_10 */
static unsigned int nand1_ceb3_mfp_pads[] = { NAND1_CEB3 };
static unsigned int nand1_ceb3_mfp_funcs[] = { S900_MUX_NAND1,
S900_MUX_PWM0 };
static unsigned int nand1_ceb0_mfp_pads[] = { NAND1_CEB0 };
static unsigned int nand1_ceb0_mfp_funcs[] = { S900_MUX_NAND1,
S900_MUX_PWM1 };
/* mfp3_9 */
static unsigned int csi1_dn0_dp0_mfp_pads[] = { CSI1_DN0, CSI1_DP0 };
static unsigned int csi1_dn0_dp0_mfp_funcs[] = { S900_MUX_SENS0,
S900_MUX_SENS0 };
/* mfp3_8 */
static unsigned int uart4_rx_tx_mfp_pads[] = { UART4_RX, UART4_TX };
static unsigned int uart4_rx_tx_mfp_funcs[] = { S900_MUX_UART4,
S900_MUX_I2C4 };
/* PADDRV group data */
/* drv0 */
static unsigned int sgpio3_drv_pads[] = { SGPIO3 };
static unsigned int sgpio2_drv_pads[] = { SGPIO2 };
static unsigned int sgpio1_drv_pads[] = { SGPIO1 };
static unsigned int sgpio0_drv_pads[] = { SGPIO0 };
static unsigned int rmii_tx_d0_d1_drv_pads[] = { ETH_TXD0, ETH_TXD1 };
static unsigned int rmii_txen_rxer_drv_pads[] = { ETH_TXEN, ETH_RXER };
static unsigned int rmii_crs_dv_drv_pads[] = { ETH_CRS_DV };
static unsigned int rmii_rx_d1_d0_drv_pads[] = { ETH_RXD1, ETH_RXD0 };
static unsigned int rmii_ref_clk_drv_pads[] = { ETH_REF_CLK };
static unsigned int rmii_mdc_mdio_drv_pads[] = { ETH_MDC, ETH_MDIO };
static unsigned int sirq_0_1_drv_pads[] = { SIRQ0, SIRQ1 };
static unsigned int sirq2_drv_pads[] = { SIRQ2 };
static unsigned int i2s_d0_d1_drv_pads[] = { I2S_D0, I2S_D1 };
static unsigned int i2s_lr_m_clk0_drv_pads[] = { I2S_LRCLK0, I2S_MCLK0 };
static unsigned int i2s_blk1_mclk1_drv_pads[] = { I2S_BCLK0, I2S_BCLK1,
I2S_LRCLK1, I2S_MCLK1 };
static unsigned int pcm1_in_out_drv_pads[] = { PCM1_IN, PCM1_CLK,
PCM1_SYNC, PCM1_OUT };
/* drv1 */
static unsigned int lvds_oap_oan_drv_pads[] = { LVDS_OAP, LVDS_OAN };
static unsigned int lvds_oep_odn_drv_pads[] = { LVDS_OEP, LVDS_OEN,
LVDS_ODP, LVDS_ODN };
static unsigned int lvds_ocp_obn_drv_pads[] = { LVDS_OCP, LVDS_OCN,
LVDS_OBP, LVDS_OBN };
static unsigned int lvds_e_drv_pads[] = { LVDS_EEP, LVDS_EEN,
LVDS_EDP, LVDS_EDN,
LVDS_ECP, LVDS_ECN,
LVDS_EBP, LVDS_EBN };
static unsigned int sd0_d3_d0_drv_pads[] = { SD0_D3, SD0_D2,
SD0_D1, SD0_D0 };
static unsigned int sd1_d3_d0_drv_pads[] = { SD1_D3, SD1_D2,
SD1_D1, SD1_D0 };
static unsigned int sd0_sd1_cmd_clk_drv_pads[] = { SD0_CLK, SD0_CMD,
SD1_CLK, SD1_CMD };
static unsigned int spi0_sclk_mosi_drv_pads[] = { SPI0_SCLK, SPI0_MOSI };
static unsigned int spi0_ss_miso_drv_pads[] = { SPI0_SS, SPI0_MISO };
static unsigned int uart0_rx_tx_drv_pads[] = { UART0_RX, UART0_TX };
static unsigned int uart4_rx_tx_drv_pads[] = { UART4_RX, UART4_TX };
static unsigned int uart2_drv_pads[] = { UART2_RX, UART2_TX,
UART2_RTSB, UART2_CTSB };
static unsigned int uart3_drv_pads[] = { UART3_RX, UART3_TX,
UART3_RTSB, UART3_CTSB };
/* drv2 */
static unsigned int i2c0_drv_pads[] = { I2C0_SCLK, I2C0_SDATA };
static unsigned int i2c1_drv_pads[] = { I2C1_SCLK, I2C1_SDATA };
static unsigned int i2c2_drv_pads[] = { I2C2_SCLK, I2C2_SDATA };
static unsigned int sensor0_drv_pads[] = { SENSOR0_PCLK,
SENSOR0_CKOUT };
/* SR group data */
/* sr0 */
static unsigned int sgpio3_sr_pads[] = { SGPIO3 };
static unsigned int sgpio2_sr_pads[] = { SGPIO2 };
static unsigned int sgpio1_sr_pads[] = { SGPIO1 };
static unsigned int sgpio0_sr_pads[] = { SGPIO0 };
static unsigned int rmii_tx_d0_d1_sr_pads[] = { ETH_TXD0, ETH_TXD1 };
static unsigned int rmii_txen_rxer_sr_pads[] = { ETH_TXEN, ETH_RXER };
static unsigned int rmii_crs_dv_sr_pads[] = { ETH_CRS_DV };
static unsigned int rmii_rx_d1_d0_sr_pads[] = { ETH_RXD1, ETH_RXD0 };
static unsigned int rmii_ref_clk_sr_pads[] = { ETH_REF_CLK };
static unsigned int rmii_mdc_mdio_sr_pads[] = { ETH_MDC, ETH_MDIO };
static unsigned int sirq_0_1_sr_pads[] = { SIRQ0, SIRQ1 };
static unsigned int sirq2_sr_pads[] = { SIRQ2 };
static unsigned int i2s_do_d1_sr_pads[] = { I2S_D0, I2S_D1 };
static unsigned int i2s_lr_m_clk0_sr_pads[] = { I2S_LRCLK0, I2S_MCLK0 };
static unsigned int i2s_bclk0_mclk1_sr_pads[] = { I2S_BCLK0, I2S_BCLK1,
I2S_LRCLK1, I2S_MCLK1 };
static unsigned int pcm1_in_out_sr_pads[] = { PCM1_IN, PCM1_CLK,
PCM1_SYNC, PCM1_OUT };
/* sr1 */
static unsigned int sd1_d3_d0_sr_pads[] = { SD1_D3, SD1_D2,
SD1_D1, SD1_D0 };
static unsigned int sd0_sd1_clk_cmd_sr_pads[] = { SD0_CLK, SD0_CMD,
SD1_CLK, SD1_CMD };
static unsigned int spi0_sclk_mosi_sr_pads[] = { SPI0_SCLK, SPI0_MOSI };
static unsigned int spi0_ss_miso_sr_pads[] = { SPI0_SS, SPI0_MISO };
static unsigned int uart0_rx_tx_sr_pads[] = { UART0_RX, UART0_TX };
static unsigned int uart4_rx_tx_sr_pads[] = { UART4_RX, UART4_TX };
static unsigned int uart2_sr_pads[] = { UART2_RX, UART2_TX,
UART2_RTSB, UART2_CTSB };
static unsigned int uart3_sr_pads[] = { UART3_RX, UART3_TX,
UART3_RTSB, UART3_CTSB };
/* sr2 */
static unsigned int i2c0_sr_pads[] = { I2C0_SCLK, I2C0_SDATA };
static unsigned int i2c1_sr_pads[] = { I2C1_SCLK, I2C1_SDATA };
static unsigned int i2c2_sr_pads[] = { I2C2_SCLK, I2C2_SDATA };
static unsigned int sensor0_sr_pads[] = { SENSOR0_PCLK,
SENSOR0_CKOUT };
/* Pinctrl groups */
static const struct owl_pingroup s900_groups[] = {
MUX_PG(lvds_oxx_uart4_mfp, 0, 22, 1),
MUX_PG(rmii_mdc_mfp, 0, 20, 2),
MUX_PG(rmii_mdio_mfp, 0, 20, 2),
MUX_PG(sirq0_mfp, 0, 19, 1),
MUX_PG(sirq1_mfp, 0, 19, 1),
MUX_PG(rmii_txd0_mfp, 0, 16, 3),
MUX_PG(rmii_txd1_mfp, 0, 16, 3),
MUX_PG(rmii_txen_mfp, 0, 13, 3),
MUX_PG(rmii_rxer_mfp, 0, 13, 3),
MUX_PG(rmii_crs_dv_mfp, 0, 11, 2),
MUX_PG(rmii_rxd1_mfp, 0, 8, 3),
MUX_PG(rmii_rxd0_mfp, 0, 8, 3),
MUX_PG(rmii_ref_clk_mfp, 0, 6, 2),
MUX_PG(i2s_d0_mfp, 0, 5, 1),
MUX_PG(i2s_d1_mfp, 0, 5, 1),
MUX_PG(i2s_lr_m_clk0_mfp, 0, 3, 2),
MUX_PG(i2s_bclk0_mfp, 0, 2, 1),
MUX_PG(i2s_bclk1_mclk1_mfp, 0, 2, 1),
MUX_PG(pcm1_in_out_mfp, 0, 0, 2),
MUX_PG(pcm1_clk_mfp, 0, 0, 2),
MUX_PG(pcm1_sync_mfp, 0, 0, 2),
MUX_PG(eram_a5_mfp, 1, 29, 3),
MUX_PG(eram_a6_mfp, 1, 29, 3),
MUX_PG(eram_a7_mfp, 1, 29, 3),
MUX_PG(eram_a8_mfp, 1, 26, 3),
MUX_PG(eram_a9_mfp, 1, 26, 3),
MUX_PG(eram_a10_mfp, 1, 26, 3),
MUX_PG(eram_a11_mfp, 1, 23, 3),
MUX_PG(lvds_oep_odn_mfp, 1, 22, 1),
MUX_PG(lvds_ocp_obn_mfp, 1, 22, 1),
MUX_PG(lvds_oap_oan_mfp, 1, 22, 1),
MUX_PG(lvds_e_mfp, 1, 21, 1),
MUX_PG(spi0_sclk_mosi_mfp, 1, 4, 2),
MUX_PG(spi0_ss_mfp, 1, 1, 3),
MUX_PG(spi0_miso_mfp, 1, 1, 3),
MUX_PG(uart2_rtsb_mfp, 2, 23, 1),
MUX_PG(uart2_ctsb_mfp, 2, 22, 1),
MUX_PG(uart3_rtsb_mfp, 2, 21, 1),
MUX_PG(uart3_ctsb_mfp, 2, 20, 1),
MUX_PG(sd0_d0_mfp, 2, 17, 3),
MUX_PG(sd0_d1_mfp, 2, 14, 3),
MUX_PG(sd0_d2_d3_mfp, 2, 11, 3),
MUX_PG(sd1_d0_d3_mfp, 2, 9, 2),
MUX_PG(sd0_cmd_mfp, 2, 7, 2),
MUX_PG(sd0_clk_mfp, 2, 5, 2),
MUX_PG(sd1_cmd_clk_mfp, 2, 3, 2),
MUX_PG(uart0_rx_mfp, 2, 0, 3),
MUX_PG(nand0_d0_ceb3_mfp, 3, 27, 1),
MUX_PG(uart0_tx_mfp, 3, 19, 3),
MUX_PG(i2c0_mfp, 3, 16, 3),
MUX_PG(csi0_cn_cp_mfp, 3, 15, 1),
MUX_PG(csi0_dn0_dp3_mfp, 3, 14, 1),
MUX_PG(csi1_dn0_cp_mfp, 3, 13, 1),
MUX_PG(dsi_dp3_dn1_mfp, 3, 12, 1),
MUX_PG(dsi_cp_dn0_mfp, 3, 12, 1),
MUX_PG(dsi_dp2_dn2_mfp, 3, 12, 1),
MUX_PG(nand1_d0_ceb1_mfp, 3, 11, 1),
MUX_PG(nand1_ceb3_mfp, 3, 10, 1),
MUX_PG(nand1_ceb0_mfp, 3, 10, 1),
MUX_PG(csi1_dn0_dp0_mfp, 3, 9, 1),
MUX_PG(uart4_rx_tx_mfp, 3, 8, 1),
DRV_PG(sgpio3_drv, 0, 30, 2),
DRV_PG(sgpio2_drv, 0, 28, 2),
DRV_PG(sgpio1_drv, 0, 26, 2),
DRV_PG(sgpio0_drv, 0, 24, 2),
DRV_PG(rmii_tx_d0_d1_drv, 0, 22, 2),
DRV_PG(rmii_txen_rxer_drv, 0, 20, 2),
DRV_PG(rmii_crs_dv_drv, 0, 18, 2),
DRV_PG(rmii_rx_d1_d0_drv, 0, 16, 2),
DRV_PG(rmii_ref_clk_drv, 0, 14, 2),
DRV_PG(rmii_mdc_mdio_drv, 0, 12, 2),
DRV_PG(sirq_0_1_drv, 0, 10, 2),
DRV_PG(sirq2_drv, 0, 8, 2),
DRV_PG(i2s_d0_d1_drv, 0, 6, 2),
DRV_PG(i2s_lr_m_clk0_drv, 0, 4, 2),
DRV_PG(i2s_blk1_mclk1_drv, 0, 2, 2),
DRV_PG(pcm1_in_out_drv, 0, 0, 2),
DRV_PG(lvds_oap_oan_drv, 1, 28, 2),
DRV_PG(lvds_oep_odn_drv, 1, 26, 2),
DRV_PG(lvds_ocp_obn_drv, 1, 24, 2),
DRV_PG(lvds_e_drv, 1, 22, 2),
DRV_PG(sd0_d3_d0_drv, 1, 20, 2),
DRV_PG(sd1_d3_d0_drv, 1, 18, 2),
DRV_PG(sd0_sd1_cmd_clk_drv, 1, 16, 2),
DRV_PG(spi0_sclk_mosi_drv, 1, 14, 2),
DRV_PG(spi0_ss_miso_drv, 1, 12, 2),
DRV_PG(uart0_rx_tx_drv, 1, 10, 2),
DRV_PG(uart4_rx_tx_drv, 1, 8, 2),
DRV_PG(uart2_drv, 1, 6, 2),
DRV_PG(uart3_drv, 1, 4, 2),
DRV_PG(i2c0_drv, 2, 30, 2),
DRV_PG(i2c1_drv, 2, 28, 2),
DRV_PG(i2c2_drv, 2, 26, 2),
DRV_PG(sensor0_drv, 2, 20, 2),
SR_PG(sgpio3_sr, 0, 15, 1),
SR_PG(sgpio2_sr, 0, 14, 1),
SR_PG(sgpio1_sr, 0, 13, 1),
SR_PG(sgpio0_sr, 0, 12, 1),
SR_PG(rmii_tx_d0_d1_sr, 0, 11, 1),
SR_PG(rmii_txen_rxer_sr, 0, 10, 1),
SR_PG(rmii_crs_dv_sr, 0, 9, 1),
SR_PG(rmii_rx_d1_d0_sr, 0, 8, 1),
SR_PG(rmii_ref_clk_sr, 0, 7, 1),
SR_PG(rmii_mdc_mdio_sr, 0, 6, 1),
SR_PG(sirq_0_1_sr, 0, 5, 1),
SR_PG(sirq2_sr, 0, 4, 1),
SR_PG(i2s_do_d1_sr, 0, 3, 1),
SR_PG(i2s_lr_m_clk0_sr, 0, 2, 1),
SR_PG(i2s_bclk0_mclk1_sr, 0, 1, 1),
SR_PG(pcm1_in_out_sr, 0, 0, 1),
SR_PG(sd1_d3_d0_sr, 1, 25, 1),
SR_PG(sd0_sd1_clk_cmd_sr, 1, 24, 1),
SR_PG(spi0_sclk_mosi_sr, 1, 23, 1),
SR_PG(spi0_ss_miso_sr, 1, 22, 1),
SR_PG(uart0_rx_tx_sr, 1, 21, 1),
SR_PG(uart4_rx_tx_sr, 1, 20, 1),
SR_PG(uart2_sr, 1, 19, 1),
SR_PG(uart3_sr, 1, 18, 1),
SR_PG(i2c0_sr, 2, 31, 1),
SR_PG(i2c1_sr, 2, 30, 1),
SR_PG(i2c2_sr, 2, 29, 1),
SR_PG(sensor0_sr, 2, 25, 1)
};
static const char * const eram_groups[] = {
"lvds_oxx_uart4_mfp",
"eram_a5_mfp",
"eram_a6_mfp",
"eram_a7_mfp",
"eram_a8_mfp",
"eram_a9_mfp",
"eram_a10_mfp",
"eram_a11_mfp",
"lvds_oap_oan_mfp",
"lvds_e_mfp",
"spi0_sclk_mosi_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
"sd0_d0_mfp",
"sd0_d1_mfp",
"sd0_d2_d3_mfp",
"sd1_d0_d3_mfp",
"sd0_cmd_mfp",
"sd0_clk_mfp",
"sd1_cmd_clk_mfp",
};
static const char * const eth_rmii_groups[] = {
"rmii_mdc_mfp",
"rmii_mdio_mfp",
"rmii_txd0_mfp",
"rmii_txd1_mfp",
"rmii_txen_mfp",
"rmii_rxer_mfp",
"rmii_crs_dv_mfp",
"rmii_rxd1_mfp",
"rmii_rxd0_mfp",
"rmii_ref_clk_mfp",
"eth_smi_dummy",
};
static const char * const eth_smii_groups[] = {
"rmii_txd0_mfp",
"rmii_txd1_mfp",
"rmii_crs_dv_mfp",
"eth_smi_dummy",
};
static const char * const spi0_groups[] = {
"spi0_sclk_mosi_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
"spi0_sclk_mosi_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
};
static const char * const spi1_groups[] = {
"pcm1_in_out_mfp",
"pcm1_clk_mfp",
"pcm1_sync_mfp",
"uart0_rx_mfp",
"uart0_tx_mfp",
"i2c0_mfp",
};
static const char * const spi2_groups[] = {
"rmii_txd0_mfp",
"rmii_txd1_mfp",
"rmii_crs_dv_mfp",
"rmii_ref_clk_mfp",
};
static const char * const spi3_groups[] = {
"rmii_txen_mfp",
"rmii_rxer_mfp",
};
static const char * const sens0_groups[] = {
"rmii_txd0_mfp",
"rmii_txd1_mfp",
"rmii_txen_mfp",
"rmii_rxer_mfp",
"rmii_rxd1_mfp",
"rmii_rxd0_mfp",
"eram_a5_mfp",
"eram_a6_mfp",
"eram_a7_mfp",
"eram_a8_mfp",
"eram_a9_mfp",
"csi0_cn_cp_mfp",
"csi0_dn0_dp3_mfp",
"csi1_dn0_cp_mfp",
"csi1_dn0_dp0_mfp",
};
static const char * const uart0_groups[] = {
"uart2_rtsb_mfp",
"uart2_ctsb_mfp",
"uart0_rx_mfp",
"uart0_tx_mfp",
};
static const char * const uart1_groups[] = {
"sd0_d2_d3_mfp",
"i2c0_mfp",
};
static const char * const uart2_groups[] = {
"rmii_mdc_mfp",
"rmii_mdio_mfp",
"rmii_txen_mfp",
"rmii_rxer_mfp",
"rmii_rxd1_mfp",
"rmii_rxd0_mfp",
"lvds_oep_odn_mfp",
"uart2_rtsb_mfp",
"uart2_ctsb_mfp",
"sd0_d0_mfp",
"sd0_d1_mfp",
"sd0_d2_d3_mfp",
"uart0_rx_mfp",
"uart0_tx_mfp_pads",
"i2c0_mfp_pads",
"dsi_dp3_dn1_mfp",
"uart2_dummy"
};
static const char * const uart3_groups[] = {
"uart3_rtsb_mfp",
"uart3_ctsb_mfp",
"uart3_dummy"
};
static const char * const uart4_groups[] = {
"lvds_oxx_uart4_mfp",
"rmii_crs_dv_mfp",
"rmii_ref_clk_mfp",
"pcm1_in_out_mfp",
"pcm1_clk_mfp",
"pcm1_sync_mfp",
"eram_a5_mfp",
"eram_a6_mfp",
"dsi_dp2_dn2_mfp",
"uart4_rx_tx_mfp_pads",
"uart4_dummy"
};
static const char * const uart5_groups[] = {
"rmii_rxd1_mfp",
"rmii_rxd0_mfp",
"eram_a9_mfp",
"eram_a11_mfp",
"uart3_rtsb_mfp",
"uart3_ctsb_mfp",
"sd0_d0_mfp",
"sd0_d1_mfp",
};
static const char * const uart6_groups[] = {
"rmii_txd0_mfp",
"rmii_txd1_mfp",
};
static const char * const i2s0_groups[] = {
"i2s_d0_mfp",
"i2s_lr_m_clk0_mfp",
"i2s_bclk0_mfp",
"i2s0_dummy",
};
static const char * const i2s1_groups[] = {
"i2s_d1_mfp",
"i2s_bclk1_mclk1_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
"uart0_rx_mfp",
"uart0_tx_mfp",
"i2s1_dummy",
};
static const char * const pcm0_groups[] = {
"i2s_d0_mfp",
"i2s_d1_mfp",
"i2s_lr_m_clk0_mfp",
"i2s_bclk0_mfp",
"i2s_bclk1_mclk1_mfp",
"spi0_sclk_mosi_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
};
static const char * const pcm1_groups[] = {
"i2s_lr_m_clk0_mfp",
"pcm1_in_out_mfp",
"pcm1_clk_mfp",
"pcm1_sync_mfp",
"lvds_oep_odn_mfp",
"spi0_ss_mfp",
"spi0_miso_mfp",
"uart0_rx_mfp",
"uart0_tx_mfp",
"dsi_cp_dn0_mfp",
"pcm1_dummy",
};
static const char * const jtag_groups[] = {
"eram_a5_mfp",
"eram_a6_mfp",
"eram_a7_mfp",
"eram_a8_mfp",
"eram_a10_mfp",
"eram_a10_mfp",
"sd0_d2_d3_mfp",
"sd0_cmd_mfp",
"sd0_clk_mfp",
};
static const char * const pwm0_groups[] = {
"sirq0_mfp",
"rmii_txd0_mfp",
"rmii_rxd1_mfp",
"eram_a5_mfp",
"nand1_ceb3_mfp",
};
static const char * const pwm1_groups[] = {
"sirq1_mfp",
"rmii_txd1_mfp",
"rmii_rxd0_mfp",
"eram_a6_mfp",
"eram_a8_mfp",
"nand1_ceb0_mfp",
};
static const char * const pwm2_groups[] = {
"rmii_mdc_mfp",
"rmii_txen_mfp",
"eram_a9_mfp",
"eram_a11_mfp",
};
static const char * const pwm3_groups[] = {
"rmii_mdio_mfp",
"rmii_rxer_mfp",
"eram_a10_mfp",
};
static const char * const pwm4_groups[] = {
"pcm1_clk_mfp",
"spi0_ss_mfp",
};
static const char * const pwm5_groups[] = {
"pcm1_sync_mfp",
"spi0_miso_mfp",
};
static const char * const sd0_groups[] = {
"sd0_d0_mfp",
"sd0_d1_mfp",
"sd0_d2_d3_mfp",
"sd0_cmd_mfp",
"sd0_clk_mfp",
};
static const char * const sd1_groups[] = {
"sd1_d0_d3_mfp",
"sd1_cmd_clk_mfp",
"sd1_dummy",
};
static const char * const sd2_groups[] = {
"nand0_d0_ceb3_mfp",
};
static const char * const sd3_groups[] = {
"nand1_d0_ceb1_mfp",
};
static const char * const i2c0_groups[] = {
"i2c0_mfp",
};
static const char * const i2c1_groups[] = {
"i2c0_mfp",
"i2c1_dummy"
};
static const char * const i2c2_groups[] = {
"i2c2_dummy"
};
static const char * const i2c3_groups[] = {
"pcm1_in_out_mfp",
"spi0_sclk_mosi_mfp",
};
static const char * const i2c4_groups[] = {
"uart4_rx_tx_mfp",
};
static const char * const i2c5_groups[] = {
"uart0_rx_mfp",
"uart0_tx_mfp",
};
static const char * const lvds_groups[] = {
"lvds_oep_odn_mfp",
"lvds_ocp_obn_mfp",
"lvds_oap_oan_mfp",
"lvds_e_mfp",
};
static const char * const usb20_groups[] = {
"eram_a9_mfp",
};
static const char * const usb30_groups[] = {
"eram_a10_mfp",
};
static const char * const gpu_groups[] = {
"sd0_d0_mfp",
"sd0_d1_mfp",
"sd0_d2_d3_mfp",
"sd0_cmd_mfp",
"sd0_clk_mfp",
};
static const char * const mipi_csi0_groups[] = {
"csi0_dn0_dp3_mfp",
};
static const char * const mipi_csi1_groups[] = {
"csi1_dn0_cp_mfp",
};
static const char * const mipi_dsi_groups[] = {
"dsi_dp3_dn1_mfp",
"dsi_cp_dn0_mfp",
"dsi_dp2_dn2_mfp",
"mipi_dsi_dummy",
};
static const char * const nand0_groups[] = {
"nand0_d0_ceb3_mfp",
"nand0_dummy",
};
static const char * const nand1_groups[] = {
"nand1_d0_ceb1_mfp",
"nand1_ceb3_mfp",
"nand1_ceb0_mfp",
"nand1_dummy",
};
static const char * const spdif_groups[] = {
"uart0_tx_mfp",
};
static const char * const sirq0_groups[] = {
"sirq0_mfp",
"sirq0_dummy",
};
static const char * const sirq1_groups[] = {
"sirq1_mfp",
"sirq1_dummy",
};
static const char * const sirq2_groups[] = {
"sirq2_dummy",
};
pinctrl: actions: make s900_functions, s900_padinfo and s900_pads static s900_functions, s900_padinfo and s900_pads are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: drivers/pinctrl/actions/pinctrl-s900.c:1445:30: warning: symbol 's900_functions' was not declared. Should it be static? drivers/pinctrl/actions/pinctrl-s900.c:1664:20: warning: symbol 's900_padinfo' was not declared. Should it be static? drivers/pinctrl/actions/pinctrl-s900.c:207:31: warning: symbol 's900_pads' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-30 16:04:34 +03:00
static const struct owl_pinmux_func s900_functions[] = {
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
[S900_MUX_ERAM] = FUNCTION(eram),
[S900_MUX_ETH_RMII] = FUNCTION(eth_rmii),
[S900_MUX_ETH_SMII] = FUNCTION(eth_smii),
[S900_MUX_SPI0] = FUNCTION(spi0),
[S900_MUX_SPI1] = FUNCTION(spi1),
[S900_MUX_SPI2] = FUNCTION(spi2),
[S900_MUX_SPI3] = FUNCTION(spi3),
[S900_MUX_SENS0] = FUNCTION(sens0),
[S900_MUX_UART0] = FUNCTION(uart0),
[S900_MUX_UART1] = FUNCTION(uart1),
[S900_MUX_UART2] = FUNCTION(uart2),
[S900_MUX_UART3] = FUNCTION(uart3),
[S900_MUX_UART4] = FUNCTION(uart4),
[S900_MUX_UART5] = FUNCTION(uart5),
[S900_MUX_UART6] = FUNCTION(uart6),
[S900_MUX_I2S0] = FUNCTION(i2s0),
[S900_MUX_I2S1] = FUNCTION(i2s1),
[S900_MUX_PCM0] = FUNCTION(pcm0),
[S900_MUX_PCM1] = FUNCTION(pcm1),
[S900_MUX_JTAG] = FUNCTION(jtag),
[S900_MUX_PWM0] = FUNCTION(pwm0),
[S900_MUX_PWM1] = FUNCTION(pwm1),
[S900_MUX_PWM2] = FUNCTION(pwm2),
[S900_MUX_PWM3] = FUNCTION(pwm3),
[S900_MUX_PWM4] = FUNCTION(pwm4),
[S900_MUX_PWM5] = FUNCTION(pwm5),
[S900_MUX_SD0] = FUNCTION(sd0),
[S900_MUX_SD1] = FUNCTION(sd1),
[S900_MUX_SD2] = FUNCTION(sd2),
[S900_MUX_SD3] = FUNCTION(sd3),
[S900_MUX_I2C0] = FUNCTION(i2c0),
[S900_MUX_I2C1] = FUNCTION(i2c1),
[S900_MUX_I2C2] = FUNCTION(i2c2),
[S900_MUX_I2C3] = FUNCTION(i2c3),
[S900_MUX_I2C4] = FUNCTION(i2c4),
[S900_MUX_I2C5] = FUNCTION(i2c5),
[S900_MUX_LVDS] = FUNCTION(lvds),
[S900_MUX_USB30] = FUNCTION(usb30),
[S900_MUX_USB20] = FUNCTION(usb20),
[S900_MUX_GPU] = FUNCTION(gpu),
[S900_MUX_MIPI_CSI0] = FUNCTION(mipi_csi0),
[S900_MUX_MIPI_CSI1] = FUNCTION(mipi_csi1),
[S900_MUX_MIPI_DSI] = FUNCTION(mipi_dsi),
[S900_MUX_NAND0] = FUNCTION(nand0),
[S900_MUX_NAND1] = FUNCTION(nand1),
[S900_MUX_SPDIF] = FUNCTION(spdif),
[S900_MUX_SIRQ0] = FUNCTION(sirq0),
[S900_MUX_SIRQ1] = FUNCTION(sirq1),
[S900_MUX_SIRQ2] = FUNCTION(sirq2)
};
/* PAD_PULLCTL0 */
static PAD_PULLCTL_CONF(ETH_RXER, 0, 18, 2);
static PAD_PULLCTL_CONF(SIRQ0, 0, 16, 2);
static PAD_PULLCTL_CONF(SIRQ1, 0, 14, 2);
static PAD_PULLCTL_CONF(SIRQ2, 0, 12, 2);
static PAD_PULLCTL_CONF(I2C0_SDATA, 0, 10, 2);
static PAD_PULLCTL_CONF(I2C0_SCLK, 0, 8, 2);
static PAD_PULLCTL_CONF(ERAM_A5, 0, 6, 2);
static PAD_PULLCTL_CONF(ERAM_A6, 0, 4, 2);
static PAD_PULLCTL_CONF(ERAM_A7, 0, 2, 2);
static PAD_PULLCTL_CONF(ERAM_A10, 0, 0, 2);
/* PAD_PULLCTL1 */
static PAD_PULLCTL_CONF(PCM1_IN, 1, 30, 2);
static PAD_PULLCTL_CONF(PCM1_OUT, 1, 28, 2);
static PAD_PULLCTL_CONF(SD0_D0, 1, 26, 2);
static PAD_PULLCTL_CONF(SD0_D1, 1, 24, 2);
static PAD_PULLCTL_CONF(SD0_D2, 1, 22, 2);
static PAD_PULLCTL_CONF(SD0_D3, 1, 20, 2);
static PAD_PULLCTL_CONF(SD0_CMD, 1, 18, 2);
static PAD_PULLCTL_CONF(SD0_CLK, 1, 16, 2);
static PAD_PULLCTL_CONF(SD1_CMD, 1, 14, 2);
static PAD_PULLCTL_CONF(SD1_D0, 1, 12, 2);
static PAD_PULLCTL_CONF(SD1_D1, 1, 10, 2);
static PAD_PULLCTL_CONF(SD1_D2, 1, 8, 2);
static PAD_PULLCTL_CONF(SD1_D3, 1, 6, 2);
static PAD_PULLCTL_CONF(UART0_RX, 1, 4, 2);
static PAD_PULLCTL_CONF(UART0_TX, 1, 2, 2);
/* PAD_PULLCTL2 */
static PAD_PULLCTL_CONF(I2C2_SDATA, 2, 26, 2);
static PAD_PULLCTL_CONF(I2C2_SCLK, 2, 24, 2);
static PAD_PULLCTL_CONF(SPI0_SCLK, 2, 22, 2);
static PAD_PULLCTL_CONF(SPI0_MOSI, 2, 20, 2);
static PAD_PULLCTL_CONF(I2C1_SDATA, 2, 18, 2);
static PAD_PULLCTL_CONF(I2C1_SCLK, 2, 16, 2);
static PAD_PULLCTL_CONF(NAND0_D0, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D1, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D2, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D3, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D4, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D5, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D6, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_D7, 2, 15, 1);
static PAD_PULLCTL_CONF(NAND0_DQSN, 2, 14, 1);
static PAD_PULLCTL_CONF(NAND0_DQS, 2, 13, 1);
static PAD_PULLCTL_CONF(NAND1_D0, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D1, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D2, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D3, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D4, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D5, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D6, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_D7, 2, 12, 1);
static PAD_PULLCTL_CONF(NAND1_DQSN, 2, 11, 1);
static PAD_PULLCTL_CONF(NAND1_DQS, 2, 10, 1);
static PAD_PULLCTL_CONF(SGPIO2, 2, 8, 2);
static PAD_PULLCTL_CONF(SGPIO3, 2, 6, 2);
static PAD_PULLCTL_CONF(UART4_RX, 2, 4, 2);
static PAD_PULLCTL_CONF(UART4_TX, 2, 2, 2);
/* PAD_ST0 */
static PAD_ST_CONF(I2C0_SDATA, 0, 30, 1);
static PAD_ST_CONF(UART0_RX, 0, 29, 1);
static PAD_ST_CONF(ETH_MDC, 0, 28, 1);
static PAD_ST_CONF(I2S_MCLK1, 0, 23, 1);
static PAD_ST_CONF(ETH_REF_CLK, 0, 22, 1);
static PAD_ST_CONF(ETH_TXEN, 0, 21, 1);
static PAD_ST_CONF(ETH_TXD0, 0, 20, 1);
static PAD_ST_CONF(I2S_LRCLK1, 0, 19, 1);
static PAD_ST_CONF(SGPIO2, 0, 18, 1);
static PAD_ST_CONF(SGPIO3, 0, 17, 1);
static PAD_ST_CONF(UART4_TX, 0, 16, 1);
static PAD_ST_CONF(I2S_D1, 0, 15, 1);
static PAD_ST_CONF(UART0_TX, 0, 14, 1);
static PAD_ST_CONF(SPI0_SCLK, 0, 13, 1);
static PAD_ST_CONF(SD0_CLK, 0, 12, 1);
static PAD_ST_CONF(ERAM_A5, 0, 11, 1);
static PAD_ST_CONF(I2C0_SCLK, 0, 7, 1);
static PAD_ST_CONF(ERAM_A9, 0, 6, 1);
static PAD_ST_CONF(LVDS_OEP, 0, 5, 1);
static PAD_ST_CONF(LVDS_ODN, 0, 4, 1);
static PAD_ST_CONF(LVDS_OAP, 0, 3, 1);
static PAD_ST_CONF(I2S_BCLK1, 0, 2, 1);
/* PAD_ST1 */
static PAD_ST_CONF(I2S_LRCLK0, 1, 29, 1);
static PAD_ST_CONF(UART4_RX, 1, 28, 1);
static PAD_ST_CONF(UART3_CTSB, 1, 27, 1);
static PAD_ST_CONF(UART3_RTSB, 1, 26, 1);
static PAD_ST_CONF(UART3_RX, 1, 25, 1);
static PAD_ST_CONF(UART2_RTSB, 1, 24, 1);
static PAD_ST_CONF(UART2_CTSB, 1, 23, 1);
static PAD_ST_CONF(UART2_RX, 1, 22, 1);
static PAD_ST_CONF(ETH_RXD0, 1, 21, 1);
static PAD_ST_CONF(ETH_RXD1, 1, 20, 1);
static PAD_ST_CONF(ETH_CRS_DV, 1, 19, 1);
static PAD_ST_CONF(ETH_RXER, 1, 18, 1);
static PAD_ST_CONF(ETH_TXD1, 1, 17, 1);
static PAD_ST_CONF(LVDS_OCP, 1, 16, 1);
static PAD_ST_CONF(LVDS_OBP, 1, 15, 1);
static PAD_ST_CONF(LVDS_OBN, 1, 14, 1);
static PAD_ST_CONF(PCM1_OUT, 1, 12, 1);
static PAD_ST_CONF(PCM1_CLK, 1, 11, 1);
static PAD_ST_CONF(PCM1_IN, 1, 10, 1);
static PAD_ST_CONF(PCM1_SYNC, 1, 9, 1);
static PAD_ST_CONF(I2C1_SCLK, 1, 8, 1);
static PAD_ST_CONF(I2C1_SDATA, 1, 7, 1);
static PAD_ST_CONF(I2C2_SCLK, 1, 6, 1);
static PAD_ST_CONF(I2C2_SDATA, 1, 5, 1);
static PAD_ST_CONF(SPI0_MOSI, 1, 4, 1);
static PAD_ST_CONF(SPI0_MISO, 1, 3, 1);
static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
/* Pad info table */
pinctrl: actions: pinctrl-s900: Constify s900_padinfo[] The only usage of s900_padinfo[] is to assign it to the padinfo field in the owl_pinctrl_soc_data struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200830224311.36994-4-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-31 01:43:11 +03:00
static const struct owl_padinfo s900_padinfo[NUM_PADS] = {
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
[ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
[ETH_TXD1] = PAD_INFO_ST(ETH_TXD1),
[ETH_TXEN] = PAD_INFO_ST(ETH_TXEN),
[ETH_RXER] = PAD_INFO_PULLCTL_ST(ETH_RXER),
[ETH_CRS_DV] = PAD_INFO_ST(ETH_CRS_DV),
[ETH_RXD1] = PAD_INFO_ST(ETH_RXD1),
[ETH_RXD0] = PAD_INFO_ST(ETH_RXD0),
[ETH_REF_CLK] = PAD_INFO_ST(ETH_REF_CLK),
[ETH_MDC] = PAD_INFO_ST(ETH_MDC),
[ETH_MDIO] = PAD_INFO(ETH_MDIO),
[SIRQ0] = PAD_INFO_PULLCTL(SIRQ0),
[SIRQ1] = PAD_INFO_PULLCTL(SIRQ1),
[SIRQ2] = PAD_INFO_PULLCTL(SIRQ2),
[I2S_D0] = PAD_INFO(I2S_D0),
[I2S_BCLK0] = PAD_INFO_ST(I2S_BCLK0),
[I2S_LRCLK0] = PAD_INFO_ST(I2S_LRCLK0),
[I2S_MCLK0] = PAD_INFO_ST(I2S_MCLK0),
[I2S_D1] = PAD_INFO_ST(I2S_D1),
[I2S_BCLK1] = PAD_INFO_ST(I2S_BCLK1),
[I2S_LRCLK1] = PAD_INFO_ST(I2S_LRCLK1),
[I2S_MCLK1] = PAD_INFO_ST(I2S_MCLK1),
[PCM1_IN] = PAD_INFO_PULLCTL_ST(PCM1_IN),
[PCM1_CLK] = PAD_INFO_ST(PCM1_CLK),
[PCM1_SYNC] = PAD_INFO_ST(PCM1_SYNC),
[PCM1_OUT] = PAD_INFO_PULLCTL_ST(PCM1_OUT),
[ERAM_A5] = PAD_INFO_PULLCTL_ST(ERAM_A5),
[ERAM_A6] = PAD_INFO_PULLCTL(ERAM_A6),
[ERAM_A7] = PAD_INFO_PULLCTL(ERAM_A7),
[ERAM_A8] = PAD_INFO(ERAM_A8),
[ERAM_A9] = PAD_INFO_ST(ERAM_A9),
[ERAM_A10] = PAD_INFO_PULLCTL(ERAM_A10),
[ERAM_A11] = PAD_INFO(ERAM_A11),
[LVDS_OEP] = PAD_INFO_ST(LVDS_OEP),
[LVDS_OEN] = PAD_INFO(LVDS_OEN),
[LVDS_ODP] = PAD_INFO(LVDS_ODP),
[LVDS_ODN] = PAD_INFO_ST(LVDS_ODN),
[LVDS_OCP] = PAD_INFO_ST(LVDS_OCP),
[LVDS_OCN] = PAD_INFO(LVDS_OCN),
[LVDS_OBP] = PAD_INFO_ST(LVDS_OBP),
[LVDS_OBN] = PAD_INFO_ST(LVDS_OBN),
[LVDS_OAP] = PAD_INFO_ST(LVDS_OAP),
[LVDS_OAN] = PAD_INFO(LVDS_OAN),
[LVDS_EEP] = PAD_INFO(LVDS_EEP),
[LVDS_EEN] = PAD_INFO(LVDS_EEN),
[LVDS_EDP] = PAD_INFO(LVDS_EDP),
[LVDS_EDN] = PAD_INFO(LVDS_EDN),
[LVDS_ECP] = PAD_INFO(LVDS_ECP),
[LVDS_ECN] = PAD_INFO(LVDS_ECN),
[LVDS_EBP] = PAD_INFO(LVDS_EBP),
[LVDS_EBN] = PAD_INFO(LVDS_EBN),
[LVDS_EAP] = PAD_INFO(LVDS_EAP),
[LVDS_EAN] = PAD_INFO(LVDS_EAN),
[SD0_D0] = PAD_INFO_PULLCTL(SD0_D0),
[SD0_D1] = PAD_INFO_PULLCTL(SD0_D1),
[SD0_D2] = PAD_INFO_PULLCTL(SD0_D2),
[SD0_D3] = PAD_INFO_PULLCTL(SD0_D3),
[SD1_D0] = PAD_INFO_PULLCTL(SD1_D0),
[SD1_D1] = PAD_INFO_PULLCTL(SD1_D1),
[SD1_D2] = PAD_INFO_PULLCTL(SD1_D2),
[SD1_D3] = PAD_INFO_PULLCTL(SD1_D3),
[SD0_CMD] = PAD_INFO_PULLCTL(SD0_CMD),
[SD0_CLK] = PAD_INFO_PULLCTL_ST(SD0_CLK),
[SD1_CMD] = PAD_INFO_PULLCTL(SD1_CMD),
[SD1_CLK] = PAD_INFO(SD1_CLK),
[SPI0_SCLK] = PAD_INFO_PULLCTL_ST(SPI0_SCLK),
[SPI0_SS] = PAD_INFO_ST(SPI0_SS),
[SPI0_MISO] = PAD_INFO_ST(SPI0_MISO),
[SPI0_MOSI] = PAD_INFO_PULLCTL_ST(SPI0_MOSI),
[UART0_RX] = PAD_INFO_PULLCTL_ST(UART0_RX),
[UART0_TX] = PAD_INFO_PULLCTL_ST(UART0_TX),
[UART2_RX] = PAD_INFO_ST(UART2_RX),
[UART2_TX] = PAD_INFO(UART2_TX),
[UART2_RTSB] = PAD_INFO_ST(UART2_RTSB),
[UART2_CTSB] = PAD_INFO_ST(UART2_CTSB),
[UART3_RX] = PAD_INFO_ST(UART3_RX),
[UART3_TX] = PAD_INFO(UART3_TX),
[UART3_RTSB] = PAD_INFO_ST(UART3_RTSB),
[UART3_CTSB] = PAD_INFO_ST(UART3_CTSB),
[UART4_RX] = PAD_INFO_PULLCTL_ST(UART4_RX),
[UART4_TX] = PAD_INFO_PULLCTL_ST(UART4_TX),
[I2C0_SCLK] = PAD_INFO_PULLCTL_ST(I2C0_SCLK),
[I2C0_SDATA] = PAD_INFO_PULLCTL_ST(I2C0_SDATA),
[I2C1_SCLK] = PAD_INFO_PULLCTL_ST(I2C1_SCLK),
[I2C1_SDATA] = PAD_INFO_PULLCTL_ST(I2C1_SDATA),
[I2C2_SCLK] = PAD_INFO_PULLCTL_ST(I2C2_SCLK),
[I2C2_SDATA] = PAD_INFO_PULLCTL_ST(I2C2_SDATA),
[CSI0_DN0] = PAD_INFO(CSI0_DN0),
[CSI0_DP0] = PAD_INFO(CSI0_DP0),
[CSI0_DN1] = PAD_INFO(CSI0_DN1),
[CSI0_DP1] = PAD_INFO(CSI0_DP1),
[CSI0_CN] = PAD_INFO(CSI0_CN),
[CSI0_CP] = PAD_INFO(CSI0_CP),
[CSI0_DN2] = PAD_INFO(CSI0_DN2),
[CSI0_DP2] = PAD_INFO(CSI0_DP2),
[CSI0_DN3] = PAD_INFO(CSI0_DN3),
[CSI0_DP3] = PAD_INFO(CSI0_DP3),
[DSI_DP3] = PAD_INFO(DSI_DP3),
[DSI_DN3] = PAD_INFO(DSI_DN3),
[DSI_DP1] = PAD_INFO(DSI_DP1),
[DSI_DN1] = PAD_INFO(DSI_DN1),
[DSI_CP] = PAD_INFO(DSI_CP),
[DSI_CN] = PAD_INFO(DSI_CN),
[DSI_DP0] = PAD_INFO(DSI_DP0),
[DSI_DN0] = PAD_INFO(DSI_DN0),
[DSI_DP2] = PAD_INFO(DSI_DP2),
[DSI_DN2] = PAD_INFO(DSI_DN2),
[SENSOR0_PCLK] = PAD_INFO(SENSOR0_PCLK),
[CSI1_DN0] = PAD_INFO(CSI1_DN0),
[CSI1_DP0] = PAD_INFO(CSI1_DP0),
[CSI1_DN1] = PAD_INFO(CSI1_DN1),
[CSI1_DP1] = PAD_INFO(CSI1_DP1),
[CSI1_CN] = PAD_INFO(CSI1_CN),
[CSI1_CP] = PAD_INFO(CSI1_CP),
[SENSOR0_CKOUT] = PAD_INFO(SENSOR0_CKOUT),
[NAND0_D0] = PAD_INFO_PULLCTL(NAND0_D0),
[NAND0_D1] = PAD_INFO_PULLCTL(NAND0_D1),
[NAND0_D2] = PAD_INFO_PULLCTL(NAND0_D2),
[NAND0_D3] = PAD_INFO_PULLCTL(NAND0_D3),
[NAND0_D4] = PAD_INFO_PULLCTL(NAND0_D4),
[NAND0_D5] = PAD_INFO_PULLCTL(NAND0_D5),
[NAND0_D6] = PAD_INFO_PULLCTL(NAND0_D6),
[NAND0_D7] = PAD_INFO_PULLCTL(NAND0_D7),
[NAND0_DQS] = PAD_INFO_PULLCTL(NAND0_DQS),
[NAND0_DQSN] = PAD_INFO_PULLCTL(NAND0_DQSN),
[NAND0_ALE] = PAD_INFO(NAND0_ALE),
[NAND0_CLE] = PAD_INFO(NAND0_CLE),
[NAND0_CEB0] = PAD_INFO(NAND0_CEB0),
[NAND0_CEB1] = PAD_INFO(NAND0_CEB1),
[NAND0_CEB2] = PAD_INFO(NAND0_CEB2),
[NAND0_CEB3] = PAD_INFO(NAND0_CEB3),
[NAND1_D0] = PAD_INFO_PULLCTL(NAND1_D0),
[NAND1_D1] = PAD_INFO_PULLCTL(NAND1_D1),
[NAND1_D2] = PAD_INFO_PULLCTL(NAND1_D2),
[NAND1_D3] = PAD_INFO_PULLCTL(NAND1_D3),
[NAND1_D4] = PAD_INFO_PULLCTL(NAND1_D4),
[NAND1_D5] = PAD_INFO_PULLCTL(NAND1_D5),
[NAND1_D6] = PAD_INFO_PULLCTL(NAND1_D6),
[NAND1_D7] = PAD_INFO_PULLCTL(NAND1_D7),
[NAND1_DQS] = PAD_INFO_PULLCTL(NAND1_DQS),
[NAND1_DQSN] = PAD_INFO_PULLCTL(NAND1_DQSN),
[NAND1_ALE] = PAD_INFO(NAND1_ALE),
[NAND1_CLE] = PAD_INFO(NAND1_CLE),
[NAND1_CEB0] = PAD_INFO(NAND1_CEB0),
[NAND1_CEB1] = PAD_INFO(NAND1_CEB1),
[NAND1_CEB2] = PAD_INFO(NAND1_CEB2),
[NAND1_CEB3] = PAD_INFO(NAND1_CEB3),
[SGPIO0] = PAD_INFO(SGPIO0),
[SGPIO1] = PAD_INFO(SGPIO1),
[SGPIO2] = PAD_INFO_PULLCTL_ST(SGPIO2),
[SGPIO3] = PAD_INFO_PULLCTL_ST(SGPIO3)
};
pinctrl: actions: Add gpio support for Actions S900 SoC Add gpio support to pinctrl driver for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-20 08:17:35 +03:00
static const struct owl_gpio_port s900_gpio_ports[] = {
pinctrl: actions: define constructor generic to Actions Semi SoC's Move generic defines common to the Owl family out of S900 driver. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-15 15:47:44 +03:00
OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 0x240, 0),
OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 0x23C, 0),
OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 0x238, 0),
OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 0x234, 0),
OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 0x230, 0),
OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
pinctrl: actions: Add gpio support for Actions S900 SoC Add gpio support to pinctrl driver for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-20 08:17:35 +03:00
};
pinctrl: actions: define pad control configurtion to SoC specific pad control for s900 and s700 are differs in number of pull control configuraions s900 has 4 pull controls - high impedence, pull up, pull down, repeater s700, s500 has 2 pull controls - pull up and pull down so pad control configuration has to SoC specific, moved out from pinctrl common to s900 specific. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-15 15:47:45 +03:00
enum s900_pinconf_pull {
OWL_PINCONF_PULL_HIZ,
OWL_PINCONF_PULL_DOWN,
OWL_PINCONF_PULL_UP,
OWL_PINCONF_PULL_HOLD,
};
static int s900_pad_pinconf_arg2val(const struct owl_padinfo *info,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = (*arg >= 1 ? 1 : 0);
break;
default:
return -ENOTSUPP;
}
return 0;
}
static int s900_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = *arg == OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = *arg == OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = *arg == OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = *arg == OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = *arg == 1;
break;
default:
return -ENOTSUPP;
}
return 0;
}
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
static struct owl_pinctrl_soc_data s900_pinctrl_data = {
.padinfo = s900_padinfo,
.pins = (const struct pinctrl_pin_desc *)s900_pads,
.npins = ARRAY_SIZE(s900_pads),
.functions = s900_functions,
.nfunctions = ARRAY_SIZE(s900_functions),
.groups = s900_groups,
.ngroups = ARRAY_SIZE(s900_groups),
pinctrl: actions: Add gpio support for Actions S900 SoC Add gpio support to pinctrl driver for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-20 08:17:35 +03:00
.ngpios = NUM_GPIOS,
.ports = s900_gpio_ports,
pinctrl: actions: define pad control configurtion to SoC specific pad control for s900 and s700 are differs in number of pull control configuraions s900 has 4 pull controls - high impedence, pull up, pull down, repeater s700, s500 has 2 pull controls - pull up and pull down so pad control configuration has to SoC specific, moved out from pinctrl common to s900 specific. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-15 15:47:45 +03:00
.nports = ARRAY_SIZE(s900_gpio_ports),
.padctl_arg2val = s900_pad_pinconf_arg2val,
.padctl_val2arg = s900_pad_pinconf_val2arg,
pinctrl: actions: Add Actions S900 pinctrl driver Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-04 20:22:52 +03:00
};
static int s900_pinctrl_probe(struct platform_device *pdev)
{
return owl_pinctrl_probe(pdev, &s900_pinctrl_data);
}
static const struct of_device_id s900_pinctrl_of_match[] = {
{ .compatible = "actions,s900-pinctrl", },
{ }
};
static struct platform_driver s900_pinctrl_driver = {
.driver = {
.name = "pinctrl-s900",
.of_match_table = of_match_ptr(s900_pinctrl_of_match),
},
.probe = s900_pinctrl_probe,
};
static int __init s900_pinctrl_init(void)
{
return platform_driver_register(&s900_pinctrl_driver);
}
arch_initcall(s900_pinctrl_init);
static void __exit s900_pinctrl_exit(void)
{
platform_driver_unregister(&s900_pinctrl_driver);
}
module_exit(s900_pinctrl_exit);
MODULE_AUTHOR("Actions Semi Inc.");
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
MODULE_DESCRIPTION("Actions Semi S900 SoC Pinctrl Driver");
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink