2011-01-20 20:42:55 +03:00
Kernel driver max6639
=====================
Supported chips:
2019-04-17 12:46:28 +03:00
2011-01-20 20:42:55 +03:00
* Maxim MAX6639
2019-04-17 12:46:28 +03:00
2011-01-20 20:42:55 +03:00
Prefix: 'max6639'
2019-04-17 12:46:28 +03:00
2011-01-20 20:42:55 +03:00
Addresses scanned: I2C 0x2c, 0x2e, 0x2f
2019-04-17 12:46:28 +03:00
2022-01-27 19:17:27 +03:00
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
2011-01-20 20:42:55 +03:00
Authors:
2019-04-17 12:46:28 +03:00
- He Changqing <hechangqing@semptian.com>
- Roland Stigge <stigge@antcom.de>
2011-01-20 20:42:55 +03:00
Description
-----------
This driver implements support for the Maxim MAX6639. This chip is a 2-channel
temperature monitor with dual PWM fan speed controller. It can monitor its own
temperature and one external diode-connected transistor or two external
diode-connected transistors.
The following device attributes are implemented via sysfs:
2019-04-17 12:46:28 +03:00
====================== ==== ===================================================
2011-01-20 20:42:55 +03:00
Attribute R/W Contents
2019-04-17 12:46:28 +03:00
====================== ==== ===================================================
2011-01-20 20:42:55 +03:00
temp1_input R Temperature channel 1 input (0..150 C)
temp2_input R Temperature channel 2 input (0..150 C)
temp1_fault R Temperature channel 1 diode fault
temp2_fault R Temperature channel 2 diode fault
temp1_max RW Set THERM temperature for input 1
2019-04-17 12:46:28 +03:00
(in C, see datasheet)
2011-01-20 20:42:55 +03:00
temp2_max RW Set THERM temperature for input 2
temp1_crit RW Set ALERT temperature for input 1
temp2_crit RW Set ALERT temperature for input 2
temp1_emergency RW Set OT temperature for input 1
2019-04-17 12:46:28 +03:00
(in C, see datasheet)
2011-01-20 20:42:55 +03:00
temp2_emergency RW Set OT temperature for input 2
pwm1 RW Fan 1 target duty cycle (0..255)
pwm2 RW Fan 2 target duty cycle (0..255)
fan1_input R TACH1 fan tachometer input (in RPM)
fan2_input R TACH2 fan tachometer input (in RPM)
fan1_fault R Fan 1 fault
fan2_fault R Fan 2 fault
temp1_max_alarm R Alarm on THERM temperature on channel 1
temp2_max_alarm R Alarm on THERM temperature on channel 2
temp1_crit_alarm R Alarm on ALERT temperature on channel 1
temp2_crit_alarm R Alarm on ALERT temperature on channel 2
temp1_emergency_alarm R Alarm on OT temperature on channel 1
temp2_emergency_alarm R Alarm on OT temperature on channel 2
2019-04-17 12:46:28 +03:00
====================== ==== ===================================================
